| 100N Permanent Violet RL | Zhenjiang Jinyang Pigment Chemical Co., Ltd. | 100N Permanent Violet RL has a pH value of 7.0, oil absorption of equal to or less than 45, and a heat resistance of 300. It has recommended applications in offset inks, solvent and water based inks, solvent and aqueous based paints, PS, AS, ABS, and PMMA...展開 100N Permanent Violet RL has a pH value of 7.0, oil absorption of equal to or less than 45, and a heat resistance of 300. It has recommended applications in offset inks, solvent and water based inks, solvent and aqueous based paints, PS, AS, ABS, and PMMA. 收起 | |
| 103X Permanent Violet RL | Zhenjiang Jinyang Pigment Chemical Co., Ltd. | 103X Permanent Violet RL has a pH value of 7.0, oil absorption of equal to or less than 45, and a heat resistance of 300. It has recommended applications in offset inks, solvent and water based inks, solvent and aqueous based paints, PS, AS, ABS, and PMMA...展開 103X Permanent Violet RL has a pH value of 7.0, oil absorption of equal to or less than 45, and a heat resistance of 300. It has recommended applications in offset inks, solvent and water based inks, solvent and aqueous based paints, PS, AS, ABS, and PMMA. 收起 | |
| 106BS Permanent Violet RL | Zhenjiang Jinyang Pigment Chemical Co., Ltd. | 106BS Permanent Violet RL has a pH value of 7.0, oil absorption of equal to or less than 45, and a heat resistance of 300. It has recommended applications in offset inks, solvent and water based inks, solvent and aqueous based paints, PS, AS, ABS, and PMM...展開 106BS Permanent Violet RL has a pH value of 7.0, oil absorption of equal to or less than 45, and a heat resistance of 300. It has recommended applications in offset inks, solvent and water based inks, solvent and aqueous based paints, PS, AS, ABS, and PMMA. 收起 | |
| 1160 Permanent Yellow HR | Zhenjiang Jinyang Pigment Chemical Co., Ltd. | 1160 Permanent Yellow HR has a pH value of 7.0, oil absorption of equal to or less than 55, and a heat resistance of 300. It has recommended applications in PS, AS, ABS, PMMA, aqueous and solvent based paints, and possible applications in water and solven...展開 1160 Permanent Yellow HR has a pH value of 7.0, oil absorption of equal to or less than 55, and a heat resistance of 300. It has recommended applications in PS, AS, ABS, PMMA, aqueous and solvent based paints, and possible applications in water and solvent-based inks. 收起 | |
| 149RP Permanent Violet RL | Zhenjiang Jinyang Pigment Chemical Co., Ltd. | 149RP Permanent Violet RL has a pH value of 7.0, oil absorption of equal to or less than 45, and a heat resistance of 300. It has recommended applications in offset inks, solvent and water based inks, solvent and aqueous based paints, PS, AS, ABS, and PMM...展開 149RP Permanent Violet RL has a pH value of 7.0, oil absorption of equal to or less than 45, and a heat resistance of 300. It has recommended applications in offset inks, solvent and water based inks, solvent and aqueous based paints, PS, AS, ABS, and PMMA. 收起 | |
| 1500 Phthalocyanine Blue BL | Zhenjiang Jinyang Pigment Chemical Co., Ltd. | 1500 Phthalocyanine Blue BL is a metastable α-phase pigment with the appearance of a reddish blue that has high tinctorial strength and good disperse ability. This product has recommended applications in EVA and possible use in printing paste. | |
| 1501 Phthalocyanine Blue B | Zhenjiang Jinyang Pigment Chemical Co., Ltd. | 1501 Phthalocyanine Blue B is a metastable α-phase pigment with the appearance of a reddish blue that has high tinctorial strength, good heat stability, and good disperse ability. This product has recommended applications in EVA and possible use in print...展開 1501 Phthalocyanine Blue B is a metastable α-phase pigment with the appearance of a reddish blue that has high tinctorial strength, good heat stability, and good disperse ability. This product has recommended applications in EVA and possible use in printing paste. 收起 | |
| 1501 Phthalocyanine Blue BF | Zhenjiang Jinyang Pigment Chemical Co., Ltd. | 1501 Phthalocyanine Blue BF is a metastable α-phase pigment with the appearance of a reddish blue that has high tinctorial strength, good heat stability, and good disperse ability. This product has recommended applications in EVA and possible use in prin...展開 1501 Phthalocyanine Blue BF is a metastable α-phase pigment with the appearance of a reddish blue that has high tinctorial strength, good heat stability, and good disperse ability. This product has recommended applications in EVA and possible use in printing paste and offset inks. 收起 | |
| 1502 Phthalocyanine Blue B | Zhenjiang Jinyang Pigment Chemical Co., Ltd. | 1502 Phthalocyanine Blue B is a metastable α-phase pigment with the appearance of a reddish blue that has high tinctorial strength, good heat stability, and good disperse ability. This product has recommended applications in EVA and possible use in print...展開 1502 Phthalocyanine Blue B is a metastable α-phase pigment with the appearance of a reddish blue that has high tinctorial strength, good heat stability, and good disperse ability. This product has recommended applications in EVA and possible use in printing paste and offset inks. 收起 | |
| 1502 Phthalocyanine Blue BF | Zhenjiang Jinyang Pigment Chemical Co., Ltd. | 1502 Phthalocyanine Blue BF is a metastable α-phase pigment with the appearance of a reddish blue that has high tinctorial strength, good heat stability, and good disperse ability. This product has recommended applications in EVA and possible use in prin...展開 1502 Phthalocyanine Blue BF is a metastable α-phase pigment with the appearance of a reddish blue that has high tinctorial strength, good heat stability, and good disperse ability. This product has recommended applications in EVA and possible use in printing paste and offset inks. 收起 | |
| 1502 Phthalocyanine Blue BH | Zhenjiang Jinyang Pigment Chemical Co., Ltd. | 1502 Phthalocyanine Blue BH is a metastable α-phase pigment with the appearance of a reddish blue that has high tinctorial strength, good heat stability, and good disperse ability. This product has recommended applications in EVA and possible use in prin...展開 1502 Phthalocyanine Blue BH is a metastable α-phase pigment with the appearance of a reddish blue that has high tinctorial strength, good heat stability, and good disperse ability. This product has recommended applications in EVA and possible use in printing paste and offset inks. 收起 | |
| 1503 Phthalocyanine Blue BL-W | Zhenjiang Jinyang Pigment Chemical Co., Ltd. | 1503 Phthalocyanine Blue BL-W is a metastable α-phase pigment with the appearance of a reddish blue that has high tinctorial strength and hydrophilicity. This product has recommended applications in printing paste and possible use in water-based inks, pa...展開 1503 Phthalocyanine Blue BL-W is a metastable α-phase pigment with the appearance of a reddish blue that has high tinctorial strength and hydrophilicity. This product has recommended applications in printing paste and possible use in water-based inks, paints, and EVA. 收起 | |
| 1503 Phthalocyanine Blue BW | Zhenjiang Jinyang Pigment Chemical Co., Ltd. | 1503 Phthalocyanine Blue BW is a metastable α-phase pigment with the appearance of a reddish blue that has high tinctorial strength, good gloss, and hydrophilicity. This product has recommended applications in water-based ink, printing paste, and possibl...展開 1503 Phthalocyanine Blue BW is a metastable α-phase pigment with the appearance of a reddish blue that has high tinctorial strength, good gloss, and hydrophilicity. This product has recommended applications in water-based ink, printing paste, and possible use in paints and EVA. 收起 | |
| 1504 Phthalocyanine Blue BR | Zhenjiang Jinyang Pigment Chemical Co., Ltd. | 1504 Phthalocyanine Blue BR is a metastable α-phase pigment with the appearance of a reddish blue that has high tinctorial strength and good gloss. This product has recommended applications in offset inks, EVA, and possible use in printing paste. | |
| 1505 Phthalocyanine Blue BX | Zhenjiang Jinyang Pigment Chemical Co., Ltd. | 1505 Phthalocyanine Blue BX is a metastable α-phase pigment with the appearance of a greenish blue that has high tinctorial strength and good disperse ability. This product has recommended applications in printing paste and possible use in paints. | |
| 1506 Phthalocyanine Blue BX | Zhenjiang Jinyang Pigment Chemical Co., Ltd. | 1506 Phthalocyanine Blue BX is a metastable α-phase pigment with the appearance of a greenish blue that has high tinctorial strength. This product has recommended applications in printing paste, water-based inks, and possible use in EVA. | |
| 1507 Phthalocyanine Blue BX | Zhenjiang Jinyang Pigment Chemical Co., Ltd. | 1507 Phthalocyanine Blue BX is a metastable α-phase pigment with the appearance of a reddish blue that has high tinctorial strength. This product has recommended applications in printing paste, EVA, offset inks, and possible use in water-based inks. | |
| 1507 Phthalocyanine Blue BXF | Zhenjiang Jinyang Pigment Chemical Co., Ltd. | 1507 Phthalocyanine Blue BXF is a metastable α-phase pigment with the appearance of a reddish blue that has high tinctorial strength and good disperse ability. This product has recommended applications in printing paste, EVA, offset inks, and possible us...展開 1507 Phthalocyanine Blue BXF is a metastable α-phase pigment with the appearance of a reddish blue that has high tinctorial strength and good disperse ability. This product has recommended applications in printing paste, EVA, offset inks, and possible use in water-based inks. 收起 | |
| 1510 Phthalocyanine Blue BS | Zhenjiang Jinyang Pigment Chemical Co., Ltd. | 1510 Phthalocyanine Blue BS is a stable α-phase pigment with the appearance of a reddish blue that has good resistance to heat and solvents. This product has recommended applications in printing paste and paints. | |
| 1511 Phthalocyanine Blue BS | Zhenjiang Jinyang Pigment Chemical Co., Ltd. | 1511 Phthalocyanine Blue BS is a stable α-phase pigment with the appearance of a reddish blue that has good resistance to heat and solvents. This product has recommended applications in printing paste and paints. | |
| 1512 Phthalocyanine Blue BSX | Zhenjiang Jinyang Pigment Chemical Co., Ltd. | 1512 Phthalocyanine Blue BSX is a stable α-phase pigment with the appearance of a greenish blue that has good resistance to heat and solvents. This product has recommended applications in paints, solvent inks, and possible uses in printing paste. | |
| 1516 Phthalocyanine Blue BSX | Zhenjiang Jinyang Pigment Chemical Co., Ltd. | 1516 Phthalocyanine Blue BSX is a stable α-phase pigment with the appearance of a greenish blue that has good resistance to heat and solvents. This product has recommended applications in paints, solvent inks, and possible uses in printing paste. | |
| 1517 Phthalocyanine Blue BSX | Zhenjiang Jinyang Pigment Chemical Co., Ltd. | 1517 Phthalocyanine Blue BSX is a stable α-phase pigment with the appearance of a greenish blue that has good resistance to heat and solvents. This product has recommended applications in paints and solvent inks. | |
| 1518 Phthalocyanine Blue BSX | Zhenjiang Jinyang Pigment Chemical Co., Ltd. | 1518 Phthalocyanine Blue BSX is a stable α-phase pigment with the appearance of a greenish blue that has good resistance to heat and solvents. This product has recommended applications in paints and printing paste. | |
| 1520 Phthalocyanine Blue BM | Zhenjiang Jinyang Pigment Chemical Co., Ltd. | 1520 Phthalocyanine Blue BM is a stable α-phase pigment with the appearance of a reddish blue that has good hiding power, high tinctorial strength, and good disperse ability. This product has recommended applications in paints and solvent inks. | |
| 1521 Phthalocyanine Blue BMH | Zhenjiang Jinyang Pigment Chemical Co., Ltd. | 1521 Phthalocyanine Blue BMH is a stable β-phase pigment with the appearance of a reddish blue that has good hiding power, high tinctorial strength, and good disperse ability. This product has recommended applications in paints and solvent inks. | |
| 1530 Phthalocyanine Blue BGS | Zhenjiang Jinyang Pigment Chemical Co., Ltd. | 1530 Phthalocyanine Blue BGS is a stable β-phase pigment with the appearance of a greenish blue that has good hiding power and good disperse ability. This product has recommended applications in paints, water-based inks, offset inks, and solvent inks. | |
| 1530PL Phthalocyanine Blue BGS | Zhenjiang Jinyang Pigment Chemical Co., Ltd. | 1530PL Phthalocyanine Blue BGS is a stable β-phase pigment with the appearance of a greenish blue that has good hiding power. This product has recommended applications in water-based inks, paints, and printing paste. | |
| 1531A Phthalocyanine Blue BGS | Zhenjiang Jinyang Pigment Chemical Co., Ltd. | 1531A Phthalocyanine Blue BGS is a stable β-phase pigment with the appearance of a greenish blue that has good disperse ability and good hiding power. This product has recommended applications in printing paste and possible uses in paints and water-based...展開 1531A Phthalocyanine Blue BGS is a stable β-phase pigment with the appearance of a greenish blue that has good disperse ability and good hiding power. This product has recommended applications in printing paste and possible uses in paints and water-based inks. 收起 | |
| 1533 Phthalocyanine Blue BGS | Zhenjiang Jinyang Pigment Chemical Co., Ltd. | 1533 Phthalocyanine Blue BGS is a stable β-phase pigment with the appearance of a greenish blue that has good disperse ability and good hiding power. This product has recommended applications in printing paste, water-based inks, and possible uses in pain...展開 1533 Phthalocyanine Blue BGS is a stable β-phase pigment with the appearance of a greenish blue that has good disperse ability and good hiding power. This product has recommended applications in printing paste, water-based inks, and possible uses in paints. 收起 | |
| 1533A Phthalocyanine Blue BGS | Zhenjiang Jinyang Pigment Chemical Co., Ltd. | 1533A Phthalocyanine Blue BGS is a stable β-phase pigment with the appearance of a greenish blue that has good disperse ability. This product has recommended applications in printing paste, water-based inks, and possible uses in paints. | |
| 1536 Phthalocyanine Blue BGS | Zhenjiang Jinyang Pigment Chemical Co., Ltd. | 1536 Phthalocyanine Blue BGS is a stable β-phase pigment with the appearance of a greenish blue that has good disperse ability and good hiding power. This product has recommended applications in paints and possible uses in water-based inks and printing p...展開 1536 Phthalocyanine Blue BGS is a stable β-phase pigment with the appearance of a greenish blue that has good disperse ability and good hiding power. This product has recommended applications in paints and possible uses in water-based inks and printing paste. 收起 | |
| 1536A Phthalocyanine Blue BGS | Zhenjiang Jinyang Pigment Chemical Co., Ltd. | 1536A Phthalocyanine Blue BGS is a stable β-phase pigment with the appearance of a greenish blue that has good disperse ability and good hiding power. This product has recommended applications in paints and possible uses in water-based inks and printing ...展開 1536A Phthalocyanine Blue BGS is a stable β-phase pigment with the appearance of a greenish blue that has good disperse ability and good hiding power. This product has recommended applications in paints and possible uses in water-based inks and printing paste. 收起 | |
| 1540 Phthalocyanine Blue BGNCF | Zhenjiang Jinyang Pigment Chemical Co., Ltd. | 1540 Phthalocyanine Blue BGNCF is a stable β-phase pigment with the appearance of a greenish blue that has good resistance to solvents. This product has recommended applications in paints and possible uses in solvent-based inks. | |
| 1541 Phthalocyanine Blue BGNCF | Zhenjiang Jinyang Pigment Chemical Co., Ltd. | 1541 Phthalocyanine Blue BGNCF is a stable β-phase pigment with the appearance of a greenish blue that has good printability and is suitable for PA-based inks. This product has recommended applications in solvent-based inks and possible uses in paints. | |
| 1541A Phthalocyanine Blue BGNCF | Zhenjiang Jinyang Pigment Chemical Co., Ltd. | 1541A Phthalocyanine Blue BGNCF is a stable β-phase pigment with the appearance of a greenish blue that has good printability and is suitable for PA-based inks. This product has recommended applications in solvent-based inks and possible uses in paints. | |
| 1542 Phthalocyanine Blue BGNCF | Zhenjiang Jinyang Pigment Chemical Co., Ltd. | 1542 Phthalocyanine Blue BGNCF is a β-form NCNF pigment with the appearance of a greenish blue that has good printability, low viscosity, good gloss, storage stability, and printability. This product has recommended applications in solvent-based inks and ...展開 1542 Phthalocyanine Blue BGNCF is a β-form NCNF pigment with the appearance of a greenish blue that has good printability, low viscosity, good gloss, storage stability, and printability. This product has recommended applications in solvent-based inks and possible uses in paints. 收起 | |
| 208BP Permanent Violet RL | Zhenjiang Jinyang Pigment Chemical Co., Ltd. | 208BP Permanent Violet RL has a pH value of 7.0, oil absorption of equal to or less than 45, and a heat resistance of 300. It has recommended applications in offset inks, solvent and water based inks, solvent and aqueous based paints, PS, AS, ABS, and PMM...展開 208BP Permanent Violet RL has a pH value of 7.0, oil absorption of equal to or less than 45, and a heat resistance of 300. It has recommended applications in offset inks, solvent and water based inks, solvent and aqueous based paints, PS, AS, ABS, and PMMA. 收起 | |
| 3118 Fast Scarlet BBN | Zhenjiang Jinyang Pigment Chemical Co., Ltd. | 3118 Fast Scarlet BBN has a pH value of 7.0, oil absorption of equal to or less than 45, and a heat resistance of 180. It has recommended applications in PS, solvent-based paints, offset inks, and possible applications in AS and PMMA. | |
| 3120 Brilliant Red BBC -B | Zhenjiang Jinyang Pigment Chemical Co., Ltd. | 3120 Brilliant Red BBC –B has a pH value of 7.0, oil absorption of equal to or less than 60, and a heat resistance of 180. It has recommended applications in PS and offset inks, and possible applications in AS, water-based inks, and aqueous paints. | |
| 3122 Quindo Red | Zhenjiang Jinyang Pigment Chemical Co., Ltd. | 3122 Quindo Red has a pH value of 7.0, oil absorption of equal to or less than 50, and a heat resistance of 280. It has recommended applications in PS, AS, ABS, PMMA, offset inks, water-based inks, and a possible application in solvent-based paints. | |
| 3122 Quindo Red W | Zhenjiang Jinyang Pigment Chemical Co., Ltd. | 3122 Quindo Red W has a pH value of 7.0, oil absorption of equal to or less than 50, and a heat resistance of 300. It has recommended applications in solvent and water based inks, and possible applications in PS, AS, ABS, and PMMA. | |
| 3123 Permanent Red FBB | Zhenjiang Jinyang Pigment Chemical Co., Ltd. | 3123 Permanent Red FBB has a pH value of 7.0, oil absorption of equal to or less than 55, and a heat resistance of 300. It has recommended applications in offset inks, solvent and water based inks, solvent-based paints, and possible applications in aqueou...展開 3123 Permanent Red FBB has a pH value of 7.0, oil absorption of equal to or less than 55, and a heat resistance of 300. It has recommended applications in offset inks, solvent and water based inks, solvent-based paints, and possible applications in aqueous based paints, PS, AS, ABS, and PMMA. 收起 | |
| 3124 Fast Red BBS | Zhenjiang Jinyang Pigment Chemical Co., Ltd. | 3124 Fast Red BBS has a pH value of 7.0, oil absorption of equal to or less than 65, and a heat resistance of 200. It has recommended applications in PMMA and solvent-based inks, and possible applications in water-based inks and solvent-based paints. | |
| 3126 Fast Red BBM | Zhenjiang Jinyang Pigment Chemical Co., Ltd. | 3126 Fast Red BBM has a pH value of 7.0, oil absorption of equal to or less than 555, and a heat resistance of 200. It has recommended applications in PS, aqueous paints, water-based inks, and possible applications in PMMA and solvent-based paints. | |
| 3128 Permanent Red F5RK | Zhenjiang Jinyang Pigment Chemical Co., Ltd. | 3128 Permanent Red F5RK has a pH value of 7.0, oil absorption of equal to or less than 55, and a heat resistance of 300. It has recommended applications in solvent-based paints, PS, AS, ABS, PMMA, and possible applications in offset ink, and solvent and w...展開 3128 Permanent Red F5RK has a pH value of 7.0, oil absorption of equal to or less than 55, and a heat resistance of 300. It has recommended applications in solvent-based paints, PS, AS, ABS, PMMA, and possible applications in offset ink, and solvent and water based inks. 收起 | |
| 3150 Permanent Red FGR | Zhenjiang Jinyang Pigment Chemical Co., Ltd. | 3150 Permanent Red FGR has a pH value of 7.0, oil absorption of equal to or less than 50, and a heat resistance of 150. It has recommended applications in aqueous paints, offset inks, solvent and water based inks, and possible applications in PS, AS, ABS,...展開 3150 Permanent Red FGR has a pH value of 7.0, oil absorption of equal to or less than 50, and a heat resistance of 150. It has recommended applications in aqueous paints, offset inks, solvent and water based inks, and possible applications in PS, AS, ABS, and PMMA. 收起 | |
| 603RW Permanent Violet RL | Zhenjiang Jinyang Pigment Chemical Co., Ltd. | 603RW Permanent Violet RL has a pH value of 7.0, oil absorption of equal to or less than 45, and a heat resistance of 300. It has recommended applications in offset inks, solvent and water based inks, solvent and aqueous based paints, PS, AS, ABS, and PMM...展開 603RW Permanent Violet RL has a pH value of 7.0, oil absorption of equal to or less than 45, and a heat resistance of 300. It has recommended applications in offset inks, solvent and water based inks, solvent and aqueous based paints, PS, AS, ABS, and PMMA. 收起 | |
| 6069 Phthalocyanine Green GY | Zhenjiang Jinyang Pigment Chemical Co., Ltd. | 6069 Phthalocyanine Green GY is a highly refined yellowish green pigment. This product has recommended applications in solvent and offset inks and possible uses in EVA. | |
| 6219 Quindo Violet R | Zhenjiang Jinyang Pigment Chemical Co., Ltd. | 6219 Quindo Violet R has a pH value of 7.0, oil absorption of equal to or less than 50, and a heat resistance of 120. It has recommended applications in solvent and aqueous based paints, PS, AS, ABS, PMMA, and possible applications in offset inks and solv...展開 6219 Quindo Violet R has a pH value of 7.0, oil absorption of equal to or less than 50, and a heat resistance of 120. It has recommended applications in solvent and aqueous based paints, PS, AS, ABS, PMMA, and possible applications in offset inks and solvent-based inks. 收起 | |
| 6250 Fast Violet Toner R | Zhenjiang Jinyang Pigment Chemical Co., Ltd. | 6250 Fast Violet Toner R has a pH value of 6.5, oil absorption of equal to or less than 55, and a heat resistance of 120. It has recommended applications in offset inks, water-based inks, PS, AS, ABS, and PMMA. | |
| 6250 Fast Violet Toner R-B | Zhenjiang Jinyang Pigment Chemical Co., Ltd. | 6250 Fast Violet Toner R-B has a pH value of 6.5, oil absorption of equal to or less than 55, and a heat resistance of 120. It has recommended applications in water-based inks and possible applications in offset inks, aqueous based paints, PS, AS, ABS, an...展開 6250 Fast Violet Toner R-B has a pH value of 6.5, oil absorption of equal to or less than 55, and a heat resistance of 120. It has recommended applications in water-based inks and possible applications in offset inks, aqueous based paints, PS, AS, ABS, and PMMA. 收起 | |
| 6260 Permanent Violet RL | Zhenjiang Jinyang Pigment Chemical Co., Ltd. | 6260 Permanent Violet RL has a pH value of 7.0, oil absorption of equal to or less than 5, and a heat resistance of 280. It has recommended applications in offset inks, solvent and water based inks, solvent and aqueous based paints, PS, AS, ABS, and PMMA. | |
| 703 Phthalocyanine Green B | Zhenjiang Jinyang Pigment Chemical Co., Ltd. | 703 Phthalocyanine Green B is a refined bluish green pigment with good disperse ability and suitable for water-based systems. This product has recommended applications in water-based inks, paints, printing paste, and possible uses in EVA and offset inks. | |
| 703 Phthalocyanine Green GW | Zhenjiang Jinyang Pigment Chemical Co., Ltd. | 703 Phthalocyanine Green GW is a refined green pigment with good disperse ability and suitable for water-based systems. This product has recommended applications in water-based inks, paints, printing paste, and possible uses in EVA and offset inks. | |
| 7039 Phthalocyanine Green G | Zhenjiang Jinyang Pigment Chemical Co., Ltd. | 7039 Phthalocyanine Green G is a refined green pigment with a fine particle size. This product has recommended applications in paints, printing paste, offset inks, and possible uses in EVA. | |
| 704B Permanent Violet RL | Zhenjiang Jinyang Pigment Chemical Co., Ltd. | 704B Permanent Violet RL has a pH value of 7.0, oil absorption of equal to or less than 45, and a heat resistance of 300. It has recommended applications in offset inks, solvent and water based inks, solvent and aqueous based paints, PS, AS, ABS, and PMMA...展開 704B Permanent Violet RL has a pH value of 7.0, oil absorption of equal to or less than 45, and a heat resistance of 300. It has recommended applications in offset inks, solvent and water based inks, solvent and aqueous based paints, PS, AS, ABS, and PMMA. 收起 | |
| 7069 Phthalocyanine Green G | Zhenjiang Jinyang Pigment Chemical Co., Ltd. | 7069 Phthalocyanine Green G is a highly refined green pigment with general phase. This product has recommended applications in water-based inks, paints, printing paste, and possible uses in EVA, solvent inks, and offset inks. | |
| 710 Phthalocyanine Green G | Zhenjiang Jinyang Pigment Chemical Co., Ltd. | 710 Phthalocyanine Green G is a refined green pigment with high tinctorial strength and good disperse ability. This product has recommended applications in EVA and possible uses in paints and printing paste. | |
| 710 Phthalocyanine Green GB | Zhenjiang Jinyang Pigment Chemical Co., Ltd. | 710 Phthalocyanine Green GB is a refined green pigment with a bluish shade that has high tinctorial strength and good disperse ability. This product has recommended applications in EVA, printing paste, and possible uses in paints. | |
| 710 Phthalocyanine Green GG | Zhenjiang Jinyang Pigment Chemical Co., Ltd. | 710 Phthalocyanine Green GG is a refined yellowish green pigment with high tinctorial strength and good disperse ability. This product has recommended applications in EVA, printing paste, and possible uses in paints. | |
| 710E Phthalocyanine Green G | Zhenjiang Jinyang Pigment Chemical Co., Ltd. | 710E Phthalocyanine Green G is a refined yellowish green pigment with high tinctorial strength and good disperse ability. This product has recommended applications in EVA, printing paste, and possible uses in paints. | |
| 710R Permanent Violet RL | Zhenjiang Jinyang Pigment Chemical Co., Ltd. | 710R Permanent Violet RL has a pH value of 7.0, oil absorption of equal to or less than 45, and a heat resistance of 300. It has recommended applications in offset inks, solvent and water based inks, solvent and aqueous based paints, PS, AS, ABS, and PMMA...展開 710R Permanent Violet RL has a pH value of 7.0, oil absorption of equal to or less than 45, and a heat resistance of 300. It has recommended applications in offset inks, solvent and water based inks, solvent and aqueous based paints, PS, AS, ABS, and PMMA. 收起 | |
| 716 Phthalocyanine Green G | Zhenjiang Jinyang Pigment Chemical Co., Ltd. | 716 Phthalocyanine Green G is a refined yellowish green pigment with high tinctorial strength and good disperse ability. This product has recommended applications in EVA, printing paste, and possible uses in paints. | |
| 7201 Phthalocyanine Green GM | Zhenjiang Jinyang Pigment Chemical Co., Ltd. | 7201 Phthalocyanine Green GM is a highly refined green pigment with good hiding power. This product has recommended applications in solvent inks and possible uses in paints. | |
| C Glass Flake GF007/C | Glassflake Ltd | C Glass Flake GF007/C is a corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of Av. 5 +/- 2 microns. The manufacturing process utilized by this flake differs from the normal spun-glass method, resulting i...展開 C Glass Flake GF007/C is a corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of Av. 5 +/- 2 microns. The manufacturing process utilized by this flake differs from the normal spun-glass method, resulting in a wider thickness specification. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| C Glass Flake GF750/C | Glassflake Ltd | C Glass Flake GF750/C is a corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of Av. 5 +/- 2 microns. The manufacturing process utilized by this flake differs from the normal spun-glass method, resulting i...展開 C Glass Flake GF750/C is a corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of Av. 5 +/- 2 microns. The manufacturing process utilized by this flake differs from the normal spun-glass method, resulting in a wider thickness specification. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| C Glass Flake GF750MC | Glassflake Ltd | C Glass Flake GF750MC is a corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of Av. 5 +/-2 microns. The manufacturing process utilized by this flake differs from the normal spun-glass method, resulting in...展開 C Glass Flake GF750MC is a corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of Av. 5 +/-2 microns. The manufacturing process utilized by this flake differs from the normal spun-glass method, resulting in a wider thickness specification. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF001 | Glassflake Ltd | ECR Glass Flake GF001 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.0 - 1.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties a...展開 ECR Glass Flake GF001 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.0 - 1.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF002 | Glassflake Ltd | ECR Glass Flake GF002 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.3 - 2.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties a...展開 ECR Glass Flake GF002 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.3 - 2.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF003 | Glassflake Ltd | ECR Glass Flake GF003 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 2.3 - 3.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties a...展開 ECR Glass Flake GF003 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 2.3 - 3.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF005 | Glassflake Ltd | ECR Glass Flake GF005 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 3.5 - 5.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties ...展開 ECR Glass Flake GF005 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 3.5 - 5.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF007 | Glassflake Ltd | ECR Glass Flake GF007 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 5.5 - 9.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties a...展開 ECR Glass Flake GF007 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 5.5 - 9.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF100M (Milled) | Glassflake Ltd | ECR Glass Flake GF100M (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.0 - 1.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pr...展開 ECR Glass Flake GF100M (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.0 - 1.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF100M (Unmilled) | Glassflake Ltd | ECR Glass Flake GF100 (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.0 - 1.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier p...展開 ECR Glass Flake GF100 (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.0 - 1.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF100nm (Unmilled) | Glassflake Ltd | ECR Glass Flake GF100nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.100nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pr...展開 ECR Glass Flake GF100nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.100nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF100nmM (Milled) | Glassflake Ltd | ECR Glass Flake GF100nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.100nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pro...展開 ECR Glass Flake GF100nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.100nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF350nm (Unmilled) | Glassflake Ltd | ECR Glass Flake GF350nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.350nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pr...展開 ECR Glass Flake GF350nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.350nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF350nmM (Milled) | Glassflake Ltd | ECR Glass Flake GF350nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.350nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pro...展開 ECR Glass Flake GF350nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.350nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF500M (Milled) | Glassflake Ltd | ECR Glass Flake GF500M (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 3.5 - 5.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pr...展開 ECR Glass Flake GF500M (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 3.5 - 5.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF500M (Unmilled) | Glassflake Ltd | ECR Glass Flake GF500 (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 3.5 - 5.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier p...展開 ECR Glass Flake GF500 (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 3.5 - 5.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF500nm (Unmilled) | Glassflake Ltd | ECR Glass Flake GF500nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.500nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pr...展開 ECR Glass Flake GF500nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.500nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF500nmM (Milled) | Glassflake Ltd | ECR Glass Flake GF500nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.500nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pro...展開 ECR Glass Flake GF500nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.500nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF750M (Milled) | Glassflake Ltd | ECR Glass Flake GF750 (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 5.5 - 9.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pro...展開 ECR Glass Flake GF750 (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 5.5 - 9.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF750M (Unmilled) | Glassflake Ltd | ECR Glass Flake GF750 (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 5.5 - 9.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier p...展開 ECR Glass Flake GF750 (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 5.5 - 9.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF750nm (Unmilled) | Glassflake Ltd | ECR Glass Flake GF750nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.750nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pr...展開 ECR Glass Flake GF750nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.750nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF750nmM (Milled) | Glassflake Ltd | ECR Glass Flake GF750nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.750nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pro...展開 ECR Glass Flake GF750nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.750nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| LA Glass Flake GF001LA | Glassflake Ltd | LA Glass Flake GF001LA is a Low Alkali Glassflake, or LAG, which has been formulated specifically for use as a pigment substrate, giving the finished product unique effects. Glass flakes, or borosilicates as they are often referred to, are a unique substr...展開 LA Glass Flake GF001LA is a Low Alkali Glassflake, or LAG, which has been formulated specifically for use as a pigment substrate, giving the finished product unique effects. Glass flakes, or borosilicates as they are often referred to, are a unique substrate which, unlike natural micas and synthetic micas, have a completely planar and smooth surface. They are also completely transparent, giving rise to effect pigments coated with metal oxides that display high brightness, good color purity, and high chroma. Presently glass flake pigments are used in both cosmetic and industrial applications including automotive coatings. 收起 | |
| LA Glass Flake GF100LA | Glassflake Ltd | LA Glass Flake GF100LA is a Low Alkali Glassflake, or LAG, which has been formulated specifically for use as a pigment substrate, giving the finished product unique effects. Glass flakes, or borosilicates as they are often referred to, are a unique substr...展開 LA Glass Flake GF100LA is a Low Alkali Glassflake, or LAG, which has been formulated specifically for use as a pigment substrate, giving the finished product unique effects. Glass flakes, or borosilicates as they are often referred to, are a unique substrate which, unlike natural micas and synthetic micas, have a completely planar and smooth surface. They are also completely transparent, giving rise to effect pigments coated with metal oxides that display high brightness, good color purity, and high chroma. Presently glass flake pigments are used in both cosmetic and industrial applications including automotive coatings. 收起 | |
| LA Glass Flake GF100MLA | Glassflake Ltd | LA Glass Flake GF100MLA is a Low Alkali Glassflake, or LAG, which has been formulated specifically for use as a pigment substrate, giving the finished product unique effects. Glass flakes, or borosilicates as they are often referred to, are a unique subst...展開 LA Glass Flake GF100MLA is a Low Alkali Glassflake, or LAG, which has been formulated specifically for use as a pigment substrate, giving the finished product unique effects. Glass flakes, or borosilicates as they are often referred to, are a unique substrate which, unlike natural micas and synthetic micas, have a completely planar and smooth surface. They are also completely transparent, giving rise to effect pigments coated with metal oxides that display high brightness, good color purity, and high chroma. Presently glass flake pigments are used in both cosmetic and industrial applications including automotive coatings. 收起 | |
| Moonshine® AgFlake 100-100 (GFEAGF-1100) | Glassflake Ltd | Moonshine® AgFlake 100-100 are thin borosilicate glass flakes encapsulated in silver. They may be used for functional purposes as a conductive filler. They have an average particle size diameter of 100 μm. High conductivity can be achieved at low loadings...展開 Moonshine® AgFlake 100-100 are thin borosilicate glass flakes encapsulated in silver. They may be used for functional purposes as a conductive filler. They have an average particle size diameter of 100 μm. High conductivity can be achieved at low loadings. Agflakes are lightweight in contrast to equivalent pure metal fillers. They may be used as both a functional and a decorative pigment. Presently glass flake pigments are used in both cosmetic and industrial applications including automotive coatings. 收起 | |
| Moonshine® AgFlake 100-20 (GFEAGF-1020) | Glassflake Ltd | Moonshine® AgFlake 100-20 are thin borosilicate glass flakes encapsulated in silver. They may be used for functional purposes as a conductive filler. They have an average particle size diameter of 20 μm. High conductivity can be achieved at low loadings. ...展開 Moonshine® AgFlake 100-20 are thin borosilicate glass flakes encapsulated in silver. They may be used for functional purposes as a conductive filler. They have an average particle size diameter of 20 μm. High conductivity can be achieved at low loadings. Agflakes are lightweight in contrast to equivalent pure metal fillers. They may be used as both a functional and a decorative pigment. Presently glass flake pigments are used in both cosmetic and industrial applications including automotive coatings. 收起 | |
| Moonshine® AgFlake 100-40 (GFEAGF-1040) | Glassflake Ltd | Moonshine® AgFlake 100-40 are thin borosilicate glass flakes encapsulated in silver. They may be used for functional purposes as a conductive filler. They have an average particle size diameter of 40 μm. High conductivity can be achieved at low loadings. ...展開 Moonshine® AgFlake 100-40 are thin borosilicate glass flakes encapsulated in silver. They may be used for functional purposes as a conductive filler. They have an average particle size diameter of 40 μm. High conductivity can be achieved at low loadings. Agflakes are lightweight in contrast to equivalent pure metal fillers. They may be used as both a functional and a decorative pigment. Presently glass flake pigments are used in both cosmetic and industrial applications including automotive coatings. 收起 | |
| Moonshine® AgFlake 100-60 (GFEAGF-1060) | Glassflake Ltd | Moonshine® AgFlake 100-60 are thin borosilicate glass flakes encapsulated in silver. They may be used for functional purposes as a conductive filler. They have an average particle size diameter of 60 μm. High conductivity can be achieved at low loadings. ...展開 Moonshine® AgFlake 100-60 are thin borosilicate glass flakes encapsulated in silver. They may be used for functional purposes as a conductive filler. They have an average particle size diameter of 60 μm. High conductivity can be achieved at low loadings. Agflakes are lightweight in contrast to equivalent pure metal fillers. They may be used as both a functional and a decorative pigment. Presently glass flake pigments are used in both cosmetic and industrial applications including automotive coatings. 收起 | |
| Moonshine® AgFlake 100-80 (GFEAGF-1080) | Glassflake Ltd | Moonshine® AgFlake 100-80 are thin borosilicate glass flakes encapsulated in silver. They may be used for functional purposes as a conductive filler. They have an average particle size diameter of 80 μm. High conductivity can be achieved at low loadings. ...展開 Moonshine® AgFlake 100-80 are thin borosilicate glass flakes encapsulated in silver. They may be used for functional purposes as a conductive filler. They have an average particle size diameter of 80 μm. High conductivity can be achieved at low loadings. Agflakes are lightweight in contrast to equivalent pure metal fillers. They may be used as both a functional and a decorative pigment. Presently glass flake pigments are used in both cosmetic and industrial applications including automotive coatings. 收起 | |
| Moonshine® AuFlake 500-90 (GFEAUF-5090) | Glassflake Ltd | Moonshine® AuFlake 500-90 are thin borosilicate glass flakes encapsulated in silver, gold, and tin oxide. They may be used for functional purposes as a conductive filler. They have an average particle size diameter of 90 μm. High conductivity can be achie...展開 Moonshine® AuFlake 500-90 are thin borosilicate glass flakes encapsulated in silver, gold, and tin oxide. They may be used for functional purposes as a conductive filler. They have an average particle size diameter of 90 μm. High conductivity can be achieved at low loadings. Agflakes are lightweight in contrast to equivalent pure metal fillers. They may be used as both a functional and a decorative pigment. Presently glass flake pigments are used in both cosmetic and industrial applications including automotive coatings. 收起 | |
| Moonshine® Blue Shimmer (GFEB) | Glassflake Ltd | Moonshine® Blue Shimmer (GFEB) are high specification glass flakes with an average thickness of 1.2 microns. They are coated with high refractive index metal oxides, resulting in unique pigments that display strong interference colors combined with high t...展開 Moonshine® Blue Shimmer (GFEB) are high specification glass flakes with an average thickness of 1.2 microns. They are coated with high refractive index metal oxides, resulting in unique pigments that display strong interference colors combined with high transparency and extraordinary gloss. They allow for the creation of unique designs and styles, even at low loadings. The Effect series may be used in both cosmetic and industrial applications. 收起 | |
| Moonshine® Blue Sparkle (GFEBS) | Glassflake Ltd | Moonshine® Blue Sparkle (GFEBS) are high specification glass flakes with an average thickness of 1.2 microns. They are coated with high refractive index metal oxides, resulting in unique pigments that display strong interference colors combined with high ...展開 Moonshine® Blue Sparkle (GFEBS) are high specification glass flakes with an average thickness of 1.2 microns. They are coated with high refractive index metal oxides, resulting in unique pigments that display strong interference colors combined with high transparency and extraordinary gloss. They allow for the creation of unique designs and styles, even at low loadings. The Effect series may be used in both cosmetic and industrial applications. 收起 | |
| Moonshine® Bronze Ultra Shimmer (GFEBRSU) | Glassflake Ltd | Moonshine® Bronze Ultra Shimmer (GFEBRSU) are high specification glass flakes with an average thickness of 1.2 microns. They are coated with high refractive index metal oxides, resulting in unique pigments that display strong interference colors combined ...展開 Moonshine® Bronze Ultra Shimmer (GFEBRSU) are high specification glass flakes with an average thickness of 1.2 microns. They are coated with high refractive index metal oxides, resulting in unique pigments that display strong interference colors combined with high transparency and extraordinary gloss. They allow for the creation of unique designs and styles, even at low loadings. The Effect series may be used in both cosmetic and industrial applications. 收起 | |
| Moonshine® Colour Travel Blue-Green-Gold Shimmer (GFE-BGG) | Glassflake Ltd | Moonshine® Colour Travel Blue-Green-Gold Shimmer (GFE-BGG) are thin borosilicate glass flakes with an average thickness of 1.2 microns. They are coated with layers of high refractive index metal oxides and silica, resulting in unique pigments that display...展開 Moonshine® Colour Travel Blue-Green-Gold Shimmer (GFE-BGG) are thin borosilicate glass flakes with an average thickness of 1.2 microns. They are coated with layers of high refractive index metal oxides and silica, resulting in unique pigments that display strong color flop effects combined with high transparency and extraordinary gloss. They allow for the creation of unique designs and styles, even at low loadings. The Effect series may be used in both cosmetic and industrial applications. 收起 |
