ANCAMIDE® 220-X-70 Curing Agent | Evonik Operations GmbH, BL Crosslinkers | ANCAMIDE® 220-X-70 Curing Agent is one in a series of standard reactive polyamides intended for use in the curing of epoxy resins. It is ideal for use in solvent-based maintenance coatings, primers, sealers and coatings for concrete. | Request Sample |
ANCAREZ® AR555 Waterborne Epoxy Resin | Evonik Operations GmbH, BL Crosslinkers | ANCAREZ® AR555 Waterborne Epoxy Resin is a waterborne solid epoxy resin dispersion delivered at 55% solids in water. It is designed for use in two-component, ambient-cure epoxy systems. It delivers superior performance at lower cost when compared to con...展開 ANCAREZ® AR555 Waterborne Epoxy Resin is a waterborne solid epoxy resin dispersion delivered at 55% solids in water. It is designed for use in two-component, ambient-cure epoxy systems. It delivers superior performance at lower cost when compared to conventional solid resin dispersions. The unique nature of this product allows film formulation without high levels of coalescing solvent, which enables the formulation of low-odor, zero-VOC systems. 收起 | Request Sample |
EPODIL® 742 | Evonik Operations GmbH, BL Crosslinkers | An epoxy resin system modifier. | Request Sample |
EPODIL® 759 Reactive Diluent | Evonik Operations GmbH, BL Crosslinkers | EPODIL® 759 Reactive Diluent is an aliphatic glycidyl ether (C12– C13). The product is a monofunctional reactive diluent used to reduce the viscosity of epoxy resin systems. Since monofunctional diluents, in general, cause molecular weight chain terminati...展開 EPODIL® 759 Reactive Diluent is an aliphatic glycidyl ether (C12– C13). The product is a monofunctional reactive diluent used to reduce the viscosity of epoxy resin systems. Since monofunctional diluents, in general, cause molecular weight chain termination, the minimum amount necessary to achieve the desired viscosity reduction should be used. 收起 | Request Sample |
HYBRIDUR® 580 Polymer Dispersion | Evonik Operations GmbH, BL Crosslinkers | HYBRIDUR® 580 Polymer Dispersion is an acrylic-urethane hybrid polymer dispersion. Cost-effective alternative to standard polyurethane dispersions. Provides outstanding adhesion to a wide variety of substrates, superior abrasion, and chemical and stain re...展開 HYBRIDUR® 580 Polymer Dispersion is an acrylic-urethane hybrid polymer dispersion. Cost-effective alternative to standard polyurethane dispersions. Provides outstanding adhesion to a wide variety of substrates, superior abrasion, and chemical and stain resistance. 收起 | Request Sample |
IMICURE® AMI-1 Curing Agent | Evonik Operations GmbH, BL Crosslinkers | IMICURE® AMI-1 Curing Agent is a liquid, elevated-temperature curing agent for epoxy resins. It is readily compatible with both liquid and solid epoxy resins, and because it is a catalytic curing agent, it is used at low loadings of 1−5 phr. It is ideal f...展開 IMICURE® AMI-1 Curing Agent is a liquid, elevated-temperature curing agent for epoxy resins. It is readily compatible with both liquid and solid epoxy resins, and because it is a catalytic curing agent, it is used at low loadings of 1−5 phr. It is ideal for use in adhesives, pre-preg composites, and encapsulation. 收起 | Request Sample |
IMICURE® EMI-24 Curing Agent | Evonik Operations GmbH, BL Crosslinkers | IMICURE® EMI-24 Curing Agent s a liquid imidazole which functions as both a curing agent and a cure accelerator for high-performance epoxy resin systems. This unusually versatile imidazole is readily processed, and provides excellent physical properties a...展開 IMICURE® EMI-24 Curing Agent s a liquid imidazole which functions as both a curing agent and a cure accelerator for high-performance epoxy resin systems. This unusually versatile imidazole is readily processed, and provides excellent physical properties across a wide range of curing temperatures. 收起 | Request Sample |
IMICURE® Imidazole Curing Agent | Evonik Operations GmbH, BL Crosslinkers | IMICURE® Imidazole Curing Agent is an elevated-temperature curing agent for epoxy resins. It is readily compatible with both liquid and solid epoxy resins, and because it is a catalytic curing agent, it is used at low loadings of 1−5 phr. It is a good acc...展開 IMICURE® Imidazole Curing Agent is an elevated-temperature curing agent for epoxy resins. It is readily compatible with both liquid and solid epoxy resins, and because it is a catalytic curing agent, it is used at low loadings of 1−5 phr. It is a good accelerator for dicyandiamide, anhydride and phenolic curing agents. 收起 | Request Sample |
NW-100 | Naewoi Korea Resins | NW-100 is an additive to improve levelling in organic solvent systems. Its main component is a high boiling hydrocarbon and ester compound. It is used to improve gloss, and is workable with print inks. NW-100 can be used in acrylic, alkyd melamine high te...展開 NW-100 is an additive to improve levelling in organic solvent systems. Its main component is a high boiling hydrocarbon and ester compound. It is used to improve gloss, and is workable with print inks. NW-100 can be used in acrylic, alkyd melamine high temperature baking systems, vinyl, acrylic and NC lacquer coatings, air drying chlorinated rubber systems, and epoxy air drying systems. 收起 | |
NW-580 | Naewoi Korea Resins | NW-580 is a wetting and dispersing additive for water-based, solvent-borne, and solvent-free systems. Its main component is unsaturated polycarboxylic acid copolymer. It reduces the viscosity in products and also has anti-floating and anti-flooding proper...展開 NW-580 is a wetting and dispersing additive for water-based, solvent-borne, and solvent-free systems. Its main component is unsaturated polycarboxylic acid copolymer. It reduces the viscosity in products and also has anti-floating and anti-flooding properties . NW-580 is used in high concentration tinter, general industrial coating systems, automotive refinish coating systems, inks, marine and heavy duty coatings, and PCM and coil coatings. 收起 | |
NW-6380H | Naewoi Korea Resins | NW-6380H is a wetting and dispersing additive for organic solvent systems. Its main component is a high molecular specialty polymer. It has high concentration tinter and wetting and dispersing effect for organic or inorganic pigments, and also is useful a...展開 NW-6380H is a wetting and dispersing additive for organic solvent systems. Its main component is a high molecular specialty polymer. It has high concentration tinter and wetting and dispersing effect for organic or inorganic pigments, and also is useful as a carbon black tinter. NW-6350 is used in general industrial coating systems, automotive coating systems, high concentration tinter and inks, coil and PCM coating systems. 收起 | |
NW-950 | Naewoi Korea Resins | NW-950 is a wetting and dispersing additive for organic solvent systems. Its main component is a high molecular specialty copolymer. It is serves as a wetting and dispersing additive for PVC Sol and PU foam and also in pigment concentrates in polyol, plas...展開 NW-950 is a wetting and dispersing additive for organic solvent systems. Its main component is a high molecular specialty copolymer. It is serves as a wetting and dispersing additive for PVC Sol and PU foam and also in pigment concentrates in polyol, plasticizer, and unsaturated polyester. NW-950 is used in automotive and refinish coating systems, general industrial systems, high concentration tint and ink, and coil coatings. 收起 | |
Spolostan 3G | Enaspol AS | Spolostan 3G is a sodium salt dispersing agent that is a yellow-brown dust free powder in appearance with a low-molecular condensate that prevents the creation of dye agglomerates and enhances dye penetration, uniform dyeing and color fastness. This produ...展開 Spolostan 3G is a sodium salt dispersing agent that is a yellow-brown dust free powder in appearance with a low-molecular condensate that prevents the creation of dye agglomerates and enhances dye penetration, uniform dyeing and color fastness. This product is commonly applied in dyes, pigments, paints, and coatings. It is also an efficient dispersing agent in the grinding of pigments and printing inks. 收起 | |
Spolostan 3L | Enaspol AS | Spolostan 3L is a sodium salt dispersing agent that is a dark brown liquid in appearance with a low-molecular condensate that prevents the creation of dye agglomerates and enhances dye penetration, uniform dyeing and color fastness. This product is common...展開 Spolostan 3L is a sodium salt dispersing agent that is a dark brown liquid in appearance with a low-molecular condensate that prevents the creation of dye agglomerates and enhances dye penetration, uniform dyeing and color fastness. This product is commonly applied in dyes, pigments, paints, and coatings. It is also an efficient dispersing agent in the grinding of pigments and printing inks. 收起 | |
Surfadol® 331 Pigment Dispersing Agent | ACME 艾克米 | Surfadol® 331 is a 80% active nonionic wetting and dispersing agent for water based pigments. It can improves wetting, dispersing performance and stability for a variety of pigments. HLB value is 8-11. Silicone free, APEO free. | |
Surfadol® 333 Pigment Dispersing Agent | ACME 艾克米 | Surfadol® 333 is a 90% active nonionic wetting and dispersing agent for water based pigments. It can improves wetting, dispersing performance and stability for a variety of pigments. HLB value is 11-20. Silicone free, APEO free. Solvent-free type is named...展開 Surfadol® 333 is a 90% active nonionic wetting and dispersing agent for water based pigments. It can improves wetting, dispersing performance and stability for a variety of pigments. HLB value is 11-20. Silicone free, APEO free. Solvent-free type is named Surfadol® 333W. 收起 | |
Surfadol® 333W Pigment Dispersing Agent | ACME 艾克米 | Surfadol® 333W is a 100% active nonionic wetting and dispersing agent for water based pigments. It can improves wetting, dispersing performance and stability for a variety of pigments. HLB value is 11-20. Silicone free, APEO free, solvent-free. | |
Surfadol® 420 (2,4,7,9-Tetramethyl-5-decyne-4,7-diol ethoxylate) | ACME 艾克米 | 一種乙氧化潤濕劑和分子消泡劑(100%活性液體﹔HLB:4)。性能類似於Surfadol 541,在水性涂料、油墨和膠粘劑體系中具有改善的操作性 | |
Surfadol® 440 Surfactant | ACME 艾克米 | 一種乙氧化低起泡潤濕劑(100%活性液體﹔HLB:8)。Surfadol 440表面活性劑可提供低泡沫動態和靜態表面張力下降,具有改善的分散性,易添加用於水性涂料、油墨和膠粘劑體系 | |
Surfadol® 465 Surfactant | ACME 艾克米 | 一種乙氧化低起泡潤濕劑(100%活性液體﹔HLB:13)。Surfadol 465是一種乙氧化炔屬二醇,可提供低起泡性,降低表面張力並提高在水性涂料、油墨和膠粘劑體系中的溶解性和相容性 | |
Surfadol® 518 | ACME 艾克米 | Surfadol® 518 is an 18% active liquid nonionic molecular defoamer (ethylene glycol and dipropylene glycol solution). It is an acetylenic diol-based product that provides defoaming in aqueous systems. Benefits include: microfoam elimination, long-lasting f...展開 Surfadol® 518 is an 18% active liquid nonionic molecular defoamer (ethylene glycol and dipropylene glycol solution). It is an acetylenic diol-based product that provides defoaming in aqueous systems. Benefits include: microfoam elimination, long-lasting foam control, defect-free foam control, and good dynamic wetting. This product is APE-free. 收起 | |
Surfadol® 520 | ACME 艾克米 | Surfadol® 520 is a 20% active liquid nonionic molecular defoamer (Polyethylene glycol solution). It is an acetylenic diol-based product that provides defoaming in aqueous systems. Benefits include: microfoam elimination, long-lasting foam control, defect-...展開 Surfadol® 520 is a 20% active liquid nonionic molecular defoamer (Polyethylene glycol solution). It is an acetylenic diol-based product that provides defoaming in aqueous systems. Benefits include: microfoam elimination, long-lasting foam control, defect-free foam control, and good dynamic wetting. This product is APE-free. 收起 | |
Surfadol® 532 | ACME 艾克米 | Surfadol® 532 is a 32% active liquid nonionic molecular defoamer (Dipropylene glycol solution). It is an acetylenic diol-based product that provides defoaming in aqueous systems. Benefits include: microfoam elimination, long-lasting foam control, defect-f...展開 Surfadol® 532 is a 32% active liquid nonionic molecular defoamer (Dipropylene glycol solution). It is an acetylenic diol-based product that provides defoaming in aqueous systems. Benefits include: microfoam elimination, long-lasting foam control, defect-free foam control, and good dynamic wetting. This product is APE-free. 收起 | |
Surfadol® 532B | ACME 艾克米 | Surfadol® 532B is a 32% active liquid nonionic molecular defoamer (Butyl cellosolve solution). It is an acetylenic diol-based product that provides defoaming in aqueous systems. Benefits include: microfoam elimination, long-lasting foam control, defect-fr...展開 Surfadol® 532B is a 32% active liquid nonionic molecular defoamer (Butyl cellosolve solution). It is an acetylenic diol-based product that provides defoaming in aqueous systems. Benefits include: microfoam elimination, long-lasting foam control, defect-free foam control, and good dynamic wetting. This product is APE-free. 收起 | |
Surfadol® 541 (2,4,7,9-Tetramethyl-5-decyne-4,7-diol, TMDD) | ACME 艾克米 | 炔屬二醇表面活性劑,具有多種優點,包括潤濕和泡沫控制,適用於水性體系。100%活性固體 | |
Surfadol® 541E Surfactant | ACME 艾克米 | 炔屬二醇表面活性劑,具有多種優點,包括潤濕和泡沫控制,適用於水性體系。50%活性液體,乙二醇稀釋 | |
Surfadol® 541H Surfactant | ACME 艾克米 | 炔屬二醇表面活性劑,具有多種優點,包括潤濕和泡沫控制,適用於水性體系。75%活性液體,乙二醇稀釋 | |
Surfadol® 541PA Surfactant | ACME 艾克米 | 炔屬二醇表面活性劑,具有多種優點,包括潤濕和泡沫控制,適用於水性體系。50%活性液體,異丙醇稀釋 | |
Surfadol® 550 | ACME 艾克米 | Surfadol® 550 is a 50% active liquid nonionic molecular defoamer (Butyl cellosolve solution). It is an acetylenic diol-based product that provides defoaming in aqueous systems. Benefits include: microfoam elimination, long-lasting foam control, defect-fre...展開 Surfadol® 550 is a 50% active liquid nonionic molecular defoamer (Butyl cellosolve solution). It is an acetylenic diol-based product that provides defoaming in aqueous systems. Benefits include: microfoam elimination, long-lasting foam control, defect-free foam control, and good dynamic wetting. This product is APE-free. 收起 | |
Surfadol® 550P | ACME 艾克米 | Surfadol® 550P is a 50% active liquid nonionic molecular defoamer (Propylene glycol solution). It is an acetylenic diol-based product that provides defoaming in aqueous systems. Benefits include: microfoam elimination, long-lasting foam control, defect-fr...展開 Surfadol® 550P is a 50% active liquid nonionic molecular defoamer (Propylene glycol solution). It is an acetylenic diol-based product that provides defoaming in aqueous systems. Benefits include: microfoam elimination, long-lasting foam control, defect-free foam control, and good dynamic wetting. This product is APE-free. 收起 | |
Surfadol® DF-59 | ACME 艾克米 | Surfadol® DF-59 is a 100% active liquid nonionic molecular defoamer. It is a mixture of ethoxylated acetylenic diols that provides defoaming in aqueous systems. Benefits include: microfoam elimination, long-lasting foam control, defect-free foam control, ...展開 Surfadol® DF-59 is a 100% active liquid nonionic molecular defoamer. It is a mixture of ethoxylated acetylenic diols that provides defoaming in aqueous systems. Benefits include: microfoam elimination, long-lasting foam control, defect-free foam control, and good dynamic wetting. This product is solvent and APE-free. 收起 | |
VESTALITE® S 101 | Evonik Operations GmbH, BL Crosslinkers | VESTALITE® S 101 is a curing agent for epoxy resin matrix designed for SMC applications. Systems using VESTALITE® S 101 have a low initial viscosity during compounding, allowing excellent fiber wetting, highfiber volume fraction and efficient process...展開 VESTALITE® S 101 is a curing agent for epoxy resin matrix designed for SMC applications. Systems using VESTALITE® S 101 have a low initial viscosity during compounding, allowing excellent fiber wetting, highfiber volume fraction and efficient processing. The high reactivity of the hardener allows fast curing inabout 4 - 5 min at 150 °. 收起 | Request Sample |
VESTALITE® S 102 | Evonik Operations GmbH, BL Crosslinkers | VESTALITE® S 102 is a curing agent for epoxy resin matrix designed for SMC applications. Systems using VESTALITE® S 102 have a low initial viscosity during compounding, allowing excellent fiber wetting, high fiber volume fraction and efficient processing....展開 VESTALITE® S 102 is a curing agent for epoxy resin matrix designed for SMC applications. Systems using VESTALITE® S 102 have a low initial viscosity during compounding, allowing excellent fiber wetting, high fiber volume fraction and efficient processing. The high reactivity of the hardener allows fast curing in about3 min at 150 °C. 收起 | Request Sample |
VESTANAT® EP-EF 201 | Evonik Operations GmbH, BL Crosslinkers | VESTANAT® EP-EF 201 is a ready catalyzed polyethoxysilane. It is used as a crosslinker or sole binder to formulate highly scratch- and chemical resistant coatings, e. g. highly scratch resistant NISO*2coatings. The crosslinker is appropriate f...展開 VESTANAT® EP-EF 201 is a ready catalyzed polyethoxysilane. It is used as a crosslinker or sole binder to formulate highly scratch- and chemical resistant coatings, e. g. highly scratch resistant NISO*2coatings. The crosslinker is appropriate for the use in "do-it-yourself" (DIY) applications. 收起 | Request Sample |
VESTANAT® EP-IPMS | Evonik Operations GmbH, BL Crosslinkers | VESTANAT® EP-IPMS is an isocyanate building block for the preparation of silane modified urethane resins. These resins may be used for the production of isocyanate-free, moisture curing adhesives, sealants and weatherable, UV- and ...展開 VESTANAT® EP-IPMS is an isocyanate building block for the preparation of silane modified urethane resins. These resins may be used for the production of isocyanate-free, moisture curing adhesives, sealants and weatherable, UV- and scratch-resistant coatings. 收起 | Request Sample |
VESTANAT® EP-M 222 X | Evonik Operations GmbH, BL Crosslinkers | VESTANAT® EP-M 222 X is a methoxysilane functional urethane crosslinker that can be used as a crosslinker to increase the flexibility of highly scratch resistant coatings, e.g. highly scratch resistant NISO*2 coatings. It is dissolved at 85 % ...展開 VESTANAT® EP-M 222 X is a methoxysilane functional urethane crosslinker that can be used as a crosslinker to increase the flexibility of highly scratch resistant coatings, e.g. highly scratch resistant NISO*2 coatings. It is dissolved at 85 % in xylene, allowing it to be used in low-VOC coatings formulation. 收起 | Request Sample |
VESTANAT® EP-M 60 | Evonik Operations GmbH, BL Crosslinkers | VESTANAT® EP-M 60 is a solvent free, polyfunctional methoxy silane. It is used as a crosslinker toformulate highly scratch resistant coatings. | Request Sample |
VESTANAT® EP-MF 203 | Evonik Operations GmbH, BL Crosslinkers | VESTANAT® EP-MF 203 is a solvent free and ready catalyzed polymethoxysilane. It is used as a crosslinker or sole binder to formulate highly scratch- and chemical resistant coating, e. g. highly scratch resistant NISO*2coatings. | Request Sample |
VESTANAT® EP-MF 204 | Evonik Operations GmbH, BL Crosslinkers | VESTANAT® EP-MF 204 is a solvent free and ready catalyzed polymethoxysilane. It is used as a crosslinker or sole binder to formulate highly scratch- and chemical resistant coating, e. g. highly scratch resistant NISO*2 coatings. | Request Sample |
VESTANAT® EP-MF 205 | Evonik Operations GmbH, BL Crosslinkers | VESTANAT® EP-MF 205 is a solvent-based, ready catalyzed polymethoxysilane. It is used as a crosslinker or sole binder to formulate extremely flexible, highly scratch- and chemical resistant coatings., e.g. highly scratch resistant NISO*2coatings. VESTA...展開 VESTANAT® EP-MF 205 is a solvent-based, ready catalyzed polymethoxysilane. It is used as a crosslinker or sole binder to formulate extremely flexible, highly scratch- and chemical resistant coatings., e.g. highly scratch resistant NISO*2coatings. VESTANAT® EP-MF 205 is particularly characterized by an optimized price/performance ratio and a harmoniously tuned mechanical property profile. 收起 | Request Sample |