| BT-B101 BRONOPOL | BioTio Group | BT-B101 BRONOPOL is a white crystalline powder that has a melting point of 126-131°C and a pH value of 5.0-7.0. This product is most commonly used as a broad-spectrum antimicrobial agent in coatings, paints, inks, and adhesive applications. | |
| BT-IN603 DTSA | BioTio Group | BT-IN603 DTSA is an off-white to light yellow powder that has a melting point of 280-290°C and a moisture content of ≤0.10%. This product is most commonly used as a chemical intermediate in dyes and biocides. | |
| BT-IN604 DCPI | BioTio Group | BT-IN604 DCPI is a white crystalline powder that has a content/assay of ≥98% and other isocyanate content of ≤1.0%. This product is most commonly used as an intermediate for the production of dyes. | |
| Leafing Aluminum Paste BT-AP400 | BioTio Group | Leafing Aluminum Paste BT-AP400 is a high pure aluminum powder that has a pigment content of 65±2% and a leafing value of ≥65%. This product is most commonly used to resist heat and corrosion in marine paint and roof coatings, industrial coatings, inks, d...展開 Leafing Aluminum Paste BT-AP400 is a high pure aluminum powder that has a pigment content of 65±2% and a leafing value of ≥65%. This product is most commonly used to resist heat and corrosion in marine paint and roof coatings, industrial coatings, inks, decorative and reflective finishes coating, and anti-corrosive coatings. 收起 | |
| Leafing Aluminum Paste BT-AP401 | BioTio Group | Leafing Aluminum Paste BT-AP401 is a high pure aluminum powder that has a pigment content of 65±2% and a leafing value of ≥75%. This product is most commonly used to resist heat and corrosion in marine paint and roof coatings, industrial coatings, inks, d...展開 Leafing Aluminum Paste BT-AP401 is a high pure aluminum powder that has a pigment content of 65±2% and a leafing value of ≥75%. This product is most commonly used to resist heat and corrosion in marine paint and roof coatings, industrial coatings, inks, decorative and reflective finishes coating, and anti-corrosive coatings. 收起 | |
| Leafing Aluminum Paste BT-AP402 | BioTio Group | Leafing Aluminum Paste BT-AP402 is a high pure aluminum powder that has a pigment content of 65±2% and a leafing value of ≥78%. This product is most commonly used to resist heat and corrosion in marine paint and roof coatings, industrial coatings, inks, d...展開 Leafing Aluminum Paste BT-AP402 is a high pure aluminum powder that has a pigment content of 65±2% and a leafing value of ≥78%. This product is most commonly used to resist heat and corrosion in marine paint and roof coatings, industrial coatings, inks, decorative and reflective finishes coating, and anti-corrosive coatings. 收起 | |
| Leafing Aluminum Paste BT-AP403 | BioTio Group | Leafing Aluminum Paste BT-AP403 is a high pure aluminum powder that has a pigment content of 65±2% and a leafing value of ≥82%. This product is most commonly used to resist heat and corrosion in marine paint and roof coatings, industrial coatings, inks, d...展開 Leafing Aluminum Paste BT-AP403 is a high pure aluminum powder that has a pigment content of 65±2% and a leafing value of ≥82%. This product is most commonly used to resist heat and corrosion in marine paint and roof coatings, industrial coatings, inks, decorative and reflective finishes coating, and anti-corrosive coatings. 收起 | |
| Leafing Aluminum Paste BT-AP404 | BioTio Group | Leafing Aluminum Paste BT-AP404 is a high pure aluminum powder that has a pigment content of 73±2% and a leafing value of ≥78%. This product is most commonly used to resist heat and corrosion in marine paint and roof coatings, industrial coatings, inks, d...展開 Leafing Aluminum Paste BT-AP404 is a high pure aluminum powder that has a pigment content of 73±2% and a leafing value of ≥78%. This product is most commonly used to resist heat and corrosion in marine paint and roof coatings, industrial coatings, inks, decorative and reflective finishes coating, and anti-corrosive coatings. 收起 | |
| LITHOPONE BT-IN600 | BioTio Group | LITHOPONE BT-IN600 is a white powder with a zinc sulfide content of ≥28% and a pH value of 7.2. This product is most commonly used in printing inks, marking paints, and coating applications. | |
| Precipitated Barium Sulfate BT-IN601 | BioTio Group | Precipitated Barium Sulfate BT-IN601 is a white powder with a barium sulfate content of 98% and a maximum whiteness of 93. This product is most commonly used as a filler in printing ink, paint, surface coating, coated art paper, and dye applications. | |
| Resiprene 35 | PT. Industri Karet Nusantara | Resiprene 35 is a cyclized natural rubber soluble in odorless solvent, particularly in aliphatic hydrocarbon and cheap blends of aromatic and aliphatic. This product is suitable for protective and maintenance coatings as well as marine paints for brushing...展開 Resiprene 35 is a cyclized natural rubber soluble in odorless solvent, particularly in aliphatic hydrocarbon and cheap blends of aromatic and aliphatic. This product is suitable for protective and maintenance coatings as well as marine paints for brushing, rollers and spray applications. It is used to supply resistance to aqueous alkalis, acids and salt solutions in addition to water and humidity. 收起 | |
| Sodium Alginate BT-IN607 | BioTio Group | Sodium Alginate BT-IN607 is a 40-mesh sized, light yellow powder that has a pH value of 6.0-7.0. This product is most commonly used as a thickener in reactive dyestuff, textile screen-printing, and carpet jet-printing applications. | |
| Titanium Dioxide Anatase BT-A11 | BioTio Group | Titanium Dioxide Anatase BT-A11 is a white powder that has a titanium dioxide content of ≤93% and a pH value of 6.5-8.0. This product is most commonly used in exterior, water-based, and powder coating, emulsion paints, and printing ink applications. | |
| Titanium Dioxide Anatase BT-A113 | BioTio Group | Titanium Dioxide Anatase BT-A113 is a white powder that has a titanium dioxide content of ≥95% and a pH value of 6.5-8.0. This product is most commonly used in exterior, water-based, and powder coating, emulsion paints, and printing ink applications. | |
| Titanium Dioxide Anatase BT-A114 | BioTio Group | Titanium Dioxide Anatase BT-A114 is a white powder that has a titanium dioxide content of ≥98% and a pH value of 6.5-8.0. This product is most commonly used in exterior, water-based, and powder coating, emulsion paints, and printing ink applications. | |
| Titanium Dioxide Rutile BT-R22 | BioTio Group | Titanium Dioxide Rutile BT-R22 is a white powder that has a titanium dioxide content of ≤90% and a pH value of 6.5-8.0. This product is most commonly used in exterior, water-based, and powder coating, road marking and emulsion paint, and printing ink appl...展開 Titanium Dioxide Rutile BT-R22 is a white powder that has a titanium dioxide content of ≤90% and a pH value of 6.5-8.0. This product is most commonly used in exterior, water-based, and powder coating, road marking and emulsion paint, and printing ink applications. 收起 | |
| Titanium Dioxide Rutile BT-R225 | BioTio Group | Titanium Dioxide Rutile BT-R225 is a white powder that has a titanium dioxide content of ≥93% and a pH value of 6.5-8.0. This product is most commonly used in exterior, water-based, and powder coating, road marking and emulsion paint, and printing ink app...展開 Titanium Dioxide Rutile BT-R225 is a white powder that has a titanium dioxide content of ≥93% and a pH value of 6.5-8.0. This product is most commonly used in exterior, water-based, and powder coating, road marking and emulsion paint, and printing ink applications. 收起 | |
| Titanium Dioxide Rutile BT-R226 | BioTio Group | Titanium Dioxide Rutile BT-R226 is a white powder that has a titanium dioxide content of ≥95% and a pH value of 6.0-8.5. This product is most commonly used in exterior, water-based, and powder coating, road marking and emulsion paint, and printing ink app...展開 Titanium Dioxide Rutile BT-R226 is a white powder that has a titanium dioxide content of ≥95% and a pH value of 6.0-8.5. This product is most commonly used in exterior, water-based, and powder coating, road marking and emulsion paint, and printing ink applications. 收起 | |
| VISIOMER® 1,4-BDDMA | Evonik Performance Materials GmbH, BL Oil Additives | VISIOMER® 1,4-BDDMA is a low viscosity dimethacrylate monomer. It is ideal for use as a crosslinking agent for the free radical polymerization, and as adhesion promoter and hardener for PVC plastisols, and a coagent for peroxide crosslinking of elastomers...展開 VISIOMER® 1,4-BDDMA is a low viscosity dimethacrylate monomer. It is ideal for use as a crosslinking agent for the free radical polymerization, and as adhesion promoter and hardener for PVC plastisols, and a coagent for peroxide crosslinking of elastomers. 收起 | |
| VISIOMER® 1,6-HDDMA | Evonik Performance Materials GmbH, BL Oil Additives | VISIOMER® 1,6-HDDMA is a hydrophobic dimethacrylate. Ideal for use as crosslinker for sealants, adhesives, inks, photopolymer plates and dental compounds. | |
| VISIOMER® AMA | Evonik Performance Materials GmbH, BL Oil Additives | VISIOMER® AMA is a clear, colorless liquid with a pungent odor. Allyl methacrylate offers exceptional performance with two double bonds of different reactivity, allowing graft copolymerization in emulsions. It is used as a crosslinker, comonomer for rigid...展開 VISIOMER® AMA is a clear, colorless liquid with a pungent odor. Allyl methacrylate offers exceptional performance with two double bonds of different reactivity, allowing graft copolymerization in emulsions. It is used as a crosslinker, comonomer for rigid plastics, graft crosslinker and base product for the manufacture of silanes. 收起 | |
| VISIOMER® BDGMA | Evonik Performance Materials GmbH, BL Oil Additives | VISIOMER® BDGMA is a monofunctional "label-free"methacrylate monomer with ether functionality. It has a very low Tg and is therefore an excellent plasticizing monomer, e.g. in emulsions | |
| VISIOMER® c-HMA | Evonik Performance Materials GmbH, BL Oil Additives | VISIOMER® c-HMA is a clear, colorless hydrophobic methacrylate monomer that can be used for polymer synthesis. It is ideal for use in the paint, adhesive, leather, paper and textile industries. | |
| VISIOMER® C18 PEG 1105 MA W | Evonik Performance Materials GmbH, BL Oil Additives | VISIOMER® C18 PEG 1105 MA W is a polar methacrylate monomer in water and GMAA. It consist of a hydrophylic backbone with side chains that end in a hydrophobic group . Ideal for use as associative polymeric thickener in emulsion polymers. | |
| VISIOMER® DMAPMA | Evonik Performance Materials GmbH, BL Oil Additives | VISIOMER® DMAPMA is an amino functional methacrylate monomer that is used to improve pigment wetting and substrate adhesion to polymers. Suggested applications include paints and coatings, paper and water and cosmetic applications. | |
| VISIOMER® EGDMA | Evonik Performance Materials GmbH, BL Oil Additives | VISIOMER® EGDMA is a low viscosity dimethacrylate monomer. It is ideal for use as a crosslinking agent to improve hardness and mechanical properties in plastics and adhesives, and a coagent for peroxide crosslinking of elastomers. | |
| VISIOMER® EHMA | Evonik Performance Materials GmbH, BL Oil Additives | VISIOMER® EHMA is hydrophobic methacrylate monomer with low Tg. Used as flexibilizer and internal plasticizer. It is also an excellent co-monomer in coatings and adhesive applications. | |
| VISIOMER® IDMA | Evonik Performance Materials GmbH, BL Oil Additives | VISIOMER® IDMA is a hydrophobic methacrylate monomer with very low Tg. It is for use as a co-monomer in adhesives, sealants and paint resins. | |
| VISIOMER® MAAmide | Evonik Performance Materials GmbH, BL Oil Additives | VISIOMER® MAAmide is a colorless, solid, crystalline with very high Tg . It is a special monomer for thermosetting paints and self-crosslinking emulsions. | |
| VISIOMER® MADAME™ | Evonik Performance Materials GmbH, BL Oil Additives | VISIOMER® MADAME™ is a monofunctional methacrylate with a tertiary amino group in the side chain. Ideal for improving adhesion of formulations. Also used for the preparation of cationic polymers, especially quaternary ammonium polymers and flocculants. | |
| VISIOMER® MEEU 25 M | Evonik Performance Materials GmbH, BL Oil Additives | VISIOMER® MEEU 25 M is an ureido methacrylate 25% in MMA. Used to impart wet adhesion and wet scrub resistance to solvent based polymers. | |
| VISIOMER® MEEU 50 W | Evonik Performance Materials GmbH, BL Oil Additives | VISIOMER® MEEU 50 W is an ureido methacrylate 50% in water. It is designed to improve wet adhesion properties of emulsion polymers and wet scrub resistance of the final products. | |
| VISIOMER® MPEG 750 MA W | Evonik Performance Materials GmbH, BL Oil Additives | VISIOMER® MPEG 750 MA W is a highly polar monomer (50% in water) with excellent water solubility. Used as co-polymerizable emulsifier to stabilize latex polymer systems e.g. emulsion. | |
| VISIOMER® THFMA | Evonik Performance Materials GmbH, BL Oil Additives | VISIOMER® THFMA is a low viscosity, low odor mono methacrylate monomer that impacts flexibility and adhesion to adhesive applications. Due to its low volatility, it can be used as reactive diluent for reactive systems, e.g. adhesives | |
| VISIOMER® TMPTMA | Evonik Performance Materials GmbH, BL Oil Additives | VISIOMER® TMPTMA is a trifunctional methacrylate monomer. It is ideal for use as a crosslinking agent in free radical polymerization, as adhesion promoter and hardener for PVC plastisol, and coagent for peroxide crosslinking of elastomers. | |
| VISIOMER® TRGDMA | Evonik Performance Materials GmbH, BL Oil Additives | VISIOMER® TRGDMA is a low viscosity dimethacrylate monomer that is ideal for use as a crosslinking agent for free radical polymerization, adhesion promoter and hardener for PVC plastisols, and component in reactive resins. | |
| VISIOMER®Terra C13-MA | Evonik Performance Materials GmbH, BL Oil Additives | VISIOMER®Terra C13-MA is a hydrophobic methacrylate monomer with very low Tg. It is ideal for use as flexibilizer and internal plasticizer. | |
| VISIOMER®Terra C17,4-MA | Evonik Performance Materials GmbH, BL Oil Additives | VISIOMER®Terra C17,4-MA is a hydrophobic methacrylate monomer with low Tg . It can be used as flexibilizer and internal plasticizer in coatings and reactive resins applications. | |
| VISIOMER®Terra IBOMA | Evonik Performance Materials GmbH, BL Oil Additives | VISIOMER®Terra IBOMA is bulky side chain alkyl methacrylate monomer with very high Tg. It provide polymers with reduced viscosity , thus allowing a higher solids content. Suggested applications include coatings and adhesive applications. |
