| 1,4-Butanediol (1,4-BDO) | DCC (Dairen Chemical Corp.) | 1,4-Butanediol (1,4-BDO) is produced by hydro-formulation and hydrogenation of Allyl Alcohol, carbon monoxide and hydrogen. 1,4-Butanediol is a colorless, high-boiling liquid with a low order of toxicity. 1,4-Butanediol is used as a raw material for manuf...展開 1,4-Butanediol (1,4-BDO) is produced by hydro-formulation and hydrogenation of Allyl Alcohol, carbon monoxide and hydrogen. 1,4-Butanediol is a colorless, high-boiling liquid with a low order of toxicity. 1,4-Butanediol is used as a raw material for manufacturing carrier solvent in printing ink, and is a key component of hot melt adhesive. 收起 | |
| Alkoxylated 2-Methyl-1,3-Propanediol | DCC (Dairen Chemical Corp.) | Alkoxylated 2-Methyl-1,3-Propanediol is produced by Alkoxylation of 2-Methyl-1,3-Propanediol and Alkoxide. It is a colorless liquid with two primary hydroxyls. Alkoxylated 2-Methyl-1,3-Propanediol is used as a raw material in printing inks, adhesives, and...展開 Alkoxylated 2-Methyl-1,3-Propanediol is produced by Alkoxylation of 2-Methyl-1,3-Propanediol and Alkoxide. It is a colorless liquid with two primary hydroxyls. Alkoxylated 2-Methyl-1,3-Propanediol is used as a raw material in printing inks, adhesives, and paints. 收起 | |
| BT-B101 BRONOPOL | BioTio Group | BT-B101 BRONOPOL is a white crystalline powder that has a melting point of 126-131°C and a pH value of 5.0-7.0. This product is most commonly used as a broad-spectrum antimicrobial agent in coatings, paints, inks, and adhesive applications. | |
| BT-IN603 DTSA | BioTio Group | BT-IN603 DTSA is an off-white to light yellow powder that has a melting point of 280-290°C and a moisture content of ≤0.10%. This product is most commonly used as a chemical intermediate in dyes and biocides. | |
| BT-IN604 DCPI | BioTio Group | BT-IN604 DCPI is a white crystalline powder that has a content/assay of ≥98% and other isocyanate content of ≤1.0%. This product is most commonly used as an intermediate for the production of dyes. | |
| Decoflux DP 210 Redbrown | Zschimmer & Schwarz GmbH & Co. KG Chemische Fabriken | Decoflux DP 210 Redbrown is a grinding vehicle. This product is insoluble in water and can be used in the production of reddish brown inks in digital printing applications. The end user will have to determine and adapt the required ratio of solids conte...展開 Decoflux DP 210 Redbrown is a grinding vehicle. This product is insoluble in water and can be used in the production of reddish brown inks in digital printing applications. The end user will have to determine and adapt the required ratio of solids content and media. 收起 | |
| Decoflux DP 211 Yellow | Zschimmer & Schwarz GmbH & Co. KG Chemische Fabriken | Decoflux DP 211 Yellow is a grinding vehicle. This product is insoluble in water and can be used in the production of yellowish-brown inks in digital printing applications. The end user will have to determine and adapt the required ratio of solids content...展開 Decoflux DP 211 Yellow is a grinding vehicle. This product is insoluble in water and can be used in the production of yellowish-brown inks in digital printing applications. The end user will have to determine and adapt the required ratio of solids content and media. 收起 | |
| Decoflux DP R 12 | Zschimmer & Schwarz GmbH & Co. KG Chemische Fabriken | Decoflux DP R 12 is an auxiliary for adjusting the rheology and printing properties of ink media. This product is solvent-based and insoluble in water. It can be used to protect against drying inks out, even at high temperatures, and will decrease visco...展開 Decoflux DP R 12 is an auxiliary for adjusting the rheology and printing properties of ink media. This product is solvent-based and insoluble in water. It can be used to protect against drying inks out, even at high temperatures, and will decrease viscosity variations in the end product. 收起 | |
| Decoflux DP R 24 | Zschimmer & Schwarz GmbH & Co. KG Chemische Fabriken | Decoflux DP R 24 is an auxiliary for adjusting the rheology and printing properties of ink media. This product is solvent-based and insoluble in water. It can be used to protect against drying inks out, even at high temperatures, and will decrease viscosi...展開 Decoflux DP R 24 is an auxiliary for adjusting the rheology and printing properties of ink media. This product is solvent-based and insoluble in water. It can be used to protect against drying inks out, even at high temperatures, and will decrease viscosity variations in the end product. 收起 | |
| Digicer Primer 008 | Zschimmer & Schwarz GmbH & Co. KG Chemische Fabriken | Digicer Primer 008, in the form of a transparent liquid, is a mix of derivatives from ethylene and propylene oxides. This product can be used as a film-former on the surface of a glaze, in order to create an uniform suction behavior of the applied printi...展開 Digicer Primer 008, in the form of a transparent liquid, is a mix of derivatives from ethylene and propylene oxides. This product can be used as a film-former on the surface of a glaze, in order to create an uniform suction behavior of the applied printing ink by the glaze, which creates good preconditions for the decoration by digital printing technology. It decreases the vapour pressure of the water, which avoids condensation on the printing heads. It also improves the application of colour and reduces defects from inexact adjustment of the printing heads. 收起 | |
| Digicer TU 203 | Zschimmer & Schwarz GmbH & Co. KG Chemische Fabriken | Digicer TU 203, in the form of a yellow liquid, is a mix of block polymers. This product is a levelling agent for glazes to be applied after decoration by digital printing technology. The hydrophobic character of inks often do not permit perfect levelin...展開 Digicer TU 203, in the form of a yellow liquid, is a mix of block polymers. This product is a levelling agent for glazes to be applied after decoration by digital printing technology. The hydrophobic character of inks often do not permit perfect leveling of the glaze on the tile surface after the decoration by digital printing technology. This product in particular avoids repelling water. 收起 | |
| Granicer 7030 | Zschimmer & Schwarz GmbH & Co. KG Chemische Fabriken | Granicer 7030, in the form of a turbid, viscous liquid, is a preparation of polymers in an aqueous solution. This product allows the application of granules to tiles by airless, double disk, bell, or curtain coating machines, and to cover the complete sur...展開 Granicer 7030, in the form of a turbid, viscous liquid, is a preparation of polymers in an aqueous solution. This product allows the application of granules to tiles by airless, double disk, bell, or curtain coating machines, and to cover the complete surface of the tiles. It can be used in the fields of engraving and digital printing. This product is miscible in water. 收起 | |
| Kingmide 530 | Sanho Chemical Co., Ltd. | Kingmide 530 is a fatty polyamide resin in a brown pellet form. This product has a softening point of 105-115°C. Kingmide 530 is most commonly used in rotogravure printing ink and alkyd varnish formulation applications. | |
| Kingmide 549 | Sanho Chemical Co., Ltd. | Kingmide 549 is a fatty polyamide resin in a brown-yellow pellet form. This product has a softening point of 112-119°C. Kingmide 549 is most commonly used in flexographic printing ink formulation applications. | |
| Kingmide 550 | Sanho Chemical Co., Ltd. | Kingmide 550 is a solid-type fatty polyamide resin in a brown-yellow pellet form. This product has a softening point of 105-115°C. Kingmide 550 is most commonly used in rotogravure printing ink formulation applications. | |
| Kingmide H-135GC | Sanho Chemical Co., Ltd. | Kingmide H-135GC is a high molecular weight polyamide resin in an amber-colored pellet form. This product has a viscosity of 1500-4000 mPa.s and a softening point of 130-140°C. Kingmide H-135GC is most commonly used in hot-melt adhesive formulation applic...展開 Kingmide H-135GC is a high molecular weight polyamide resin in an amber-colored pellet form. This product has a viscosity of 1500-4000 mPa.s and a softening point of 130-140°C. Kingmide H-135GC is most commonly used in hot-melt adhesive formulation applications. 收起 | |
| Leafing Aluminum Paste BT-AP400 | BioTio Group | Leafing Aluminum Paste BT-AP400 is a high pure aluminum powder that has a pigment content of 65±2% and a leafing value of ≥65%. This product is most commonly used to resist heat and corrosion in marine paint and roof coatings, industrial coatings, inks, d...展開 Leafing Aluminum Paste BT-AP400 is a high pure aluminum powder that has a pigment content of 65±2% and a leafing value of ≥65%. This product is most commonly used to resist heat and corrosion in marine paint and roof coatings, industrial coatings, inks, decorative and reflective finishes coating, and anti-corrosive coatings. 收起 | |
| Leafing Aluminum Paste BT-AP401 | BioTio Group | Leafing Aluminum Paste BT-AP401 is a high pure aluminum powder that has a pigment content of 65±2% and a leafing value of ≥75%. This product is most commonly used to resist heat and corrosion in marine paint and roof coatings, industrial coatings, inks, d...展開 Leafing Aluminum Paste BT-AP401 is a high pure aluminum powder that has a pigment content of 65±2% and a leafing value of ≥75%. This product is most commonly used to resist heat and corrosion in marine paint and roof coatings, industrial coatings, inks, decorative and reflective finishes coating, and anti-corrosive coatings. 收起 | |
| Leafing Aluminum Paste BT-AP402 | BioTio Group | Leafing Aluminum Paste BT-AP402 is a high pure aluminum powder that has a pigment content of 65±2% and a leafing value of ≥78%. This product is most commonly used to resist heat and corrosion in marine paint and roof coatings, industrial coatings, inks, d...展開 Leafing Aluminum Paste BT-AP402 is a high pure aluminum powder that has a pigment content of 65±2% and a leafing value of ≥78%. This product is most commonly used to resist heat and corrosion in marine paint and roof coatings, industrial coatings, inks, decorative and reflective finishes coating, and anti-corrosive coatings. 收起 | |
| Leafing Aluminum Paste BT-AP403 | BioTio Group | Leafing Aluminum Paste BT-AP403 is a high pure aluminum powder that has a pigment content of 65±2% and a leafing value of ≥82%. This product is most commonly used to resist heat and corrosion in marine paint and roof coatings, industrial coatings, inks, d...展開 Leafing Aluminum Paste BT-AP403 is a high pure aluminum powder that has a pigment content of 65±2% and a leafing value of ≥82%. This product is most commonly used to resist heat and corrosion in marine paint and roof coatings, industrial coatings, inks, decorative and reflective finishes coating, and anti-corrosive coatings. 收起 | |
| Leafing Aluminum Paste BT-AP404 | BioTio Group | Leafing Aluminum Paste BT-AP404 is a high pure aluminum powder that has a pigment content of 73±2% and a leafing value of ≥78%. This product is most commonly used to resist heat and corrosion in marine paint and roof coatings, industrial coatings, inks, d...展開 Leafing Aluminum Paste BT-AP404 is a high pure aluminum powder that has a pigment content of 73±2% and a leafing value of ≥78%. This product is most commonly used to resist heat and corrosion in marine paint and roof coatings, industrial coatings, inks, decorative and reflective finishes coating, and anti-corrosive coatings. 收起 | |
| LITHOPONE BT-IN600 | BioTio Group | LITHOPONE BT-IN600 is a white powder with a zinc sulfide content of ≥28% and a pH value of 7.2. This product is most commonly used in printing inks, marking paints, and coating applications. | |
| n-Propanol | DCC (Dairen Chemical Corp.) | n-Propanol is a by-product which is produced by hydro-formulation and hydrogenation of Allyl Alcohol, carbon monoxide, and hydrogen. It is a medium boiling point, colorless liquid and has a typical alcohol odor, and is soluble in water, alcohol, and ether...展開 n-Propanol is a by-product which is produced by hydro-formulation and hydrogenation of Allyl Alcohol, carbon monoxide, and hydrogen. It is a medium boiling point, colorless liquid and has a typical alcohol odor, and is soluble in water, alcohol, and ether. n-Propanol is used in solvents, as an intermediate chemical for synthesis, industrial coatings, adhesives, and printing inks. 收起 | |
| Precipitated Barium Sulfate BT-IN601 | BioTio Group | Precipitated Barium Sulfate BT-IN601 is a white powder with a barium sulfate content of 98% and a maximum whiteness of 93. This product is most commonly used as a filler in printing ink, paint, surface coating, coated art paper, and dye applications. | |
| Sodium Alginate BT-IN607 | BioTio Group | Sodium Alginate BT-IN607 is a 40-mesh sized, light yellow powder that has a pH value of 6.0-7.0. This product is most commonly used as a thickener in reactive dyestuff, textile screen-printing, and carpet jet-printing applications. | |
| Titanium Dioxide Anatase BT-A11 | BioTio Group | Titanium Dioxide Anatase BT-A11 is a white powder that has a titanium dioxide content of ≤93% and a pH value of 6.5-8.0. This product is most commonly used in exterior, water-based, and powder coating, emulsion paints, and printing ink applications. | |
| Titanium Dioxide Anatase BT-A113 | BioTio Group | Titanium Dioxide Anatase BT-A113 is a white powder that has a titanium dioxide content of ≥95% and a pH value of 6.5-8.0. This product is most commonly used in exterior, water-based, and powder coating, emulsion paints, and printing ink applications. | |
| Titanium Dioxide Anatase BT-A114 | BioTio Group | Titanium Dioxide Anatase BT-A114 is a white powder that has a titanium dioxide content of ≥98% and a pH value of 6.5-8.0. This product is most commonly used in exterior, water-based, and powder coating, emulsion paints, and printing ink applications. | |
| Titanium Dioxide Rutile BT-R22 | BioTio Group | Titanium Dioxide Rutile BT-R22 is a white powder that has a titanium dioxide content of ≤90% and a pH value of 6.5-8.0. This product is most commonly used in exterior, water-based, and powder coating, road marking and emulsion paint, and printing ink appl...展開 Titanium Dioxide Rutile BT-R22 is a white powder that has a titanium dioxide content of ≤90% and a pH value of 6.5-8.0. This product is most commonly used in exterior, water-based, and powder coating, road marking and emulsion paint, and printing ink applications. 收起 | |
| Titanium Dioxide Rutile BT-R225 | BioTio Group | Titanium Dioxide Rutile BT-R225 is a white powder that has a titanium dioxide content of ≥93% and a pH value of 6.5-8.0. This product is most commonly used in exterior, water-based, and powder coating, road marking and emulsion paint, and printing ink app...展開 Titanium Dioxide Rutile BT-R225 is a white powder that has a titanium dioxide content of ≥93% and a pH value of 6.5-8.0. This product is most commonly used in exterior, water-based, and powder coating, road marking and emulsion paint, and printing ink applications. 收起 | |
| Titanium Dioxide Rutile BT-R226 | BioTio Group | Titanium Dioxide Rutile BT-R226 is a white powder that has a titanium dioxide content of ≥95% and a pH value of 6.0-8.5. This product is most commonly used in exterior, water-based, and powder coating, road marking and emulsion paint, and printing ink app...展開 Titanium Dioxide Rutile BT-R226 is a white powder that has a titanium dioxide content of ≥95% and a pH value of 6.0-8.5. This product is most commonly used in exterior, water-based, and powder coating, road marking and emulsion paint, and printing ink applications. 收起 | |
| Tohmide 393 | Sanho Chemical Co., Ltd. | Tohmide 393 is a fatty polyamide resin in a brown-yellow pellet form. This product has a softening point of 110-120°C. Tohmide 393 is most commonly used in rotogravure printing ink and varnish formulation applications. | |
| Tohmide 394-N | Sanho Chemical Co., Ltd. | Tohmide 394-N is a solid-type fatty polyamide resin in a brown-yellow pellet form. This product has a softening point of 105-115°C. Tohmide 394-N is most commonly used in rotogravure printing ink formulation applications. | |
| Tohmide 90 | Sanho Chemical Co., Ltd. | Tohmide 90 is a fatty polyamide resin in a brown-yellow pellet form. This product has a softening point of 105-115°C. Tohmide 90 is most commonly used in rotogravure printing ink formulation applications. | |
| Tohmide 92 | Sanho Chemical Co., Ltd. | Tohmide 92 is a fatty polyamide resin in a brown-yellow pellet form. This product has a softening point of 115-125°C. Tohmide 92 is most commonly used in flexographic printing ink formulation applications. | |
| Tohmide TXC-245A | Sanho Chemical Co., Ltd. | Tohmide TXC-245A is a solid-type polyamide resin in a brown-colored pellet form. This product has a viscosity of 1000-2000 mPa.s and a softening point of 85-95°C. Tohmide TXC-245A is most commonly used in heat transfer ink formulation applications. | |
| Trucolor 206 Beige | Zschimmer & Schwarz GmbH & Co. KG Chemische Fabriken | Trucolor 206 Beige is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with beige ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are s...展開 Trucolor 206 Beige is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with beige ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are stored at least 1 day at production temperature before usage. 收起 | |
| Trucolor 206 Beige S | Zschimmer & Schwarz GmbH & Co. KG Chemische Fabriken | Trucolor 206 Beige S is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with beige ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are st...展開 Trucolor 206 Beige S is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with beige ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are stored at least 1 day at production temperature before usage. 收起 | |
| Trucolor 207 Blue HT | Zschimmer & Schwarz GmbH & Co. KG Chemische Fabriken | Trucolor 207 Blue HT is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with blue ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are sto...展開 Trucolor 207 Blue HT is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with blue ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are stored at least 1 day at production temperature before usage. 收起 | |
| Trucolor 209 Pink | Zschimmer & Schwarz GmbH & Co. KG Chemische Fabriken | Trucolor 209 Pink is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with pink ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are stored...展開 Trucolor 209 Pink is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with pink ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are stored at least 1 day at production temperature before usage. 收起 | |
| Trucolor 209 Pink S | Zschimmer & Schwarz GmbH & Co. KG Chemische Fabriken | Trucolor 209 Pink S is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with pink ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are stor...展開 Trucolor 209 Pink S is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with pink ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are stored at least 1 day at production temperature before usage. 收起 | |
| Trucolor 210 Redbrown | Zschimmer & Schwarz GmbH & Co. KG Chemische Fabriken | Trucolor 210 Redbrown is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with reddish-brown ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the in...展開 Trucolor 210 Redbrown is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with reddish-brown ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are stored at least 1 day at production temperature before usage. 收起 | |
| Trucolor 210 Redbrown S | Zschimmer & Schwarz GmbH & Co. KG Chemische Fabriken | Trucolor 210 Redbrown S is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with reddish-brown ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the ...展開 Trucolor 210 Redbrown S is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with reddish-brown ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are stored at least 1 day at production temperature before usage. 收起 | |
| Trucolor 211 Yellow | Zschimmer & Schwarz GmbH & Co. KG Chemische Fabriken | Trucolor 211 Yellow is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with yellow ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are st...展開 Trucolor 211 Yellow is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with yellow ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are stored at least 1 day at production temperature before usage. 收起 | |
| Trucolor 211 Yellow S | Zschimmer & Schwarz GmbH & Co. KG Chemische Fabriken | Trucolor 211 Yellow S is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with yellow ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are ...展開 Trucolor 211 Yellow S is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with yellow ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are stored at least 1 day at production temperature before usage. 收起 | |
| Trucolor 217 Black | Zschimmer & Schwarz GmbH & Co. KG Chemische Fabriken | Trucolor 217 Black is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with black ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are stor...展開 Trucolor 217 Black is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with black ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are stored at least 1 day at production temperature before usage. 收起 | |
| Trucolor 217 Black S | Zschimmer & Schwarz GmbH & Co. KG Chemische Fabriken | Trucolor 217 Black S is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with black ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are st...展開 Trucolor 217 Black S is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with black ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are stored at least 1 day at production temperature before usage. 收起 | |
| Trucolor 219 Blue | Zschimmer & Schwarz GmbH & Co. KG Chemische Fabriken | Trucolor 219 Blue is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with blue ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are stored...展開 Trucolor 219 Blue is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with blue ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are stored at least 1 day at production temperature before usage. 收起 | |
| Trucolor 219 Blue S | Zschimmer & Schwarz GmbH & Co. KG Chemische Fabriken | Trucolor 219 Blue S is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with blue ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are stor...展開 Trucolor 219 Blue S is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with blue ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are stored at least 1 day at production temperature before usage. 收起 | |
| Trucolor 236 Orange | Zschimmer & Schwarz GmbH & Co. KG Chemische Fabriken | Trucolor 236 Orange is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with orange ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are st...展開 Trucolor 236 Orange is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with orange ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are stored at least 1 day at production temperature before usage. 收起 | |
| Trucolor 236 Orange S | Zschimmer & Schwarz GmbH & Co. KG Chemische Fabriken | Trucolor 236 Orange S is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with orange ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are ...展開 Trucolor 236 Orange S is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with orange ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are stored at least 1 day at production temperature before usage. 收起 | |
| Trucolor 242 White | Zschimmer & Schwarz GmbH & Co. KG Chemische Fabriken | Trucolor 242 White is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with white ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are stor...展開 Trucolor 242 White is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with white ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are stored at least 1 day at production temperature before usage. 收起 | |
| Trucolor 242 White S | Zschimmer & Schwarz GmbH & Co. KG Chemische Fabriken | Trucolor 242 White S is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with white ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are st...展開 Trucolor 242 White S is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with white ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are stored at least 1 day at production temperature before usage. 收起 | |
| Trucolor 281 Redorange | Zschimmer & Schwarz GmbH & Co. KG Chemische Fabriken | Trucolor 281 Redorange is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with reddish-orange ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the ...展開 Trucolor 281 Redorange is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with reddish-orange ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are stored at least 1 day at production temperature before usage. 收起 | |
| Trucolor 285 Green | Zschimmer & Schwarz GmbH & Co. KG Chemische Fabriken | Trucolor 285 Green is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with green ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are stor...展開 Trucolor 285 Green is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with green ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are stored at least 1 day at production temperature before usage. 收起 | |
| Trucolor EF 245 | Zschimmer & Schwarz GmbH & Co. KG Chemische Fabriken | Trucolor EF 245 is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with transparent effects in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the ink...展開 Trucolor EF 245 is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with transparent effects in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are stored at least 1 day at production temperature before usage. 收起 | |
| Trucolor EF 245 S | Zschimmer & Schwarz GmbH & Co. KG Chemische Fabriken | Trucolor EF 245 S is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with transparent effects in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks...展開 Trucolor EF 245 S is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with transparent effects in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are stored at least 1 day at production temperature before usage. 收起 |
