| AR-515 | Chan Sieh Enterprises Co, Ltd. | AR-515 is an IBMA homo-polymer acrylic resin. This product has high tolerance for pigments and low odour. It can be used in aerosol paints and inks. AR-515 creates a flexible film and is solvent in ketones and aromatics. | |
| AR-518 | Chan Sieh Enterprises Co, Ltd. | AR-518 is a styrene copolymer acrylic resin. This product has high gloss, and provides both heat- and chemical-resistance. It can be used in topcoats and primers for aluminum, and in inks. AR-518 is solvent in ketones, aromatics, and esters. | |
| AR-523 | Chan Sieh Enterprises Co, Ltd. | AR-523 is a BMA copolymer resin featuring good water-resistance, low odor, and good outdoor durability. This product can be used in flexo and gravure printing inks, packaging inks, plastic coatings, and aluminum heat seal lacquers. | |
| AR-531 | Chan Sieh Enterprises Co, Ltd. | AR-531 is a BMA copolymer acrylic resin. This product has a high tolerance for pigments, and shows good heat resistance. It can be used in aerosols, packaging inks, flexo and gravure printing inks, alkyd paints, and parquet polishes. AR-531 is solvent ...展開 AR-531 is a BMA copolymer acrylic resin. This product has a high tolerance for pigments, and shows good heat resistance. It can be used in aerosols, packaging inks, flexo and gravure printing inks, alkyd paints, and parquet polishes. AR-531 is solvent in alcohols, ketones, aromatics, and esters. 收起 | |
| AR-620 | Chan Sieh Enterprises Co, Ltd. | AR-620 is an acrylic resin printing binder in the form of a white emulsion. This product features long retention of film surface tack. It can be used to temporarily adhere fabrics to a printing board. | |
| BT-B101 BRONOPOL | BioTio Group | BT-B101 BRONOPOL is a white crystalline powder that has a melting point of 126-131°C and a pH value of 5.0-7.0. This product is most commonly used as a broad-spectrum antimicrobial agent in coatings, paints, inks, and adhesive applications. | |
| BT-IN603 DTSA | BioTio Group | BT-IN603 DTSA is an off-white to light yellow powder that has a melting point of 280-290°C and a moisture content of ≤0.10%. This product is most commonly used as a chemical intermediate in dyes and biocides. | |
| BT-IN604 DCPI | BioTio Group | BT-IN604 DCPI is a white crystalline powder that has a content/assay of ≥98% and other isocyanate content of ≤1.0%. This product is most commonly used as an intermediate for the production of dyes. | |
| Decoflux DP 210 Redbrown | Zschimmer & Schwarz GmbH & Co. KG Chemische Fabriken | Decoflux DP 210 Redbrown is a grinding vehicle. This product is insoluble in water and can be used in the production of reddish brown inks in digital printing applications. The end user will have to determine and adapt the required ratio of solids conte...展開 Decoflux DP 210 Redbrown is a grinding vehicle. This product is insoluble in water and can be used in the production of reddish brown inks in digital printing applications. The end user will have to determine and adapt the required ratio of solids content and media. 收起 | |
| Decoflux DP 211 Yellow | Zschimmer & Schwarz GmbH & Co. KG Chemische Fabriken | Decoflux DP 211 Yellow is a grinding vehicle. This product is insoluble in water and can be used in the production of yellowish-brown inks in digital printing applications. The end user will have to determine and adapt the required ratio of solids content...展開 Decoflux DP 211 Yellow is a grinding vehicle. This product is insoluble in water and can be used in the production of yellowish-brown inks in digital printing applications. The end user will have to determine and adapt the required ratio of solids content and media. 收起 | |
| Decoflux DP R 12 | Zschimmer & Schwarz GmbH & Co. KG Chemische Fabriken | Decoflux DP R 12 is an auxiliary for adjusting the rheology and printing properties of ink media. This product is solvent-based and insoluble in water. It can be used to protect against drying inks out, even at high temperatures, and will decrease visco...展開 Decoflux DP R 12 is an auxiliary for adjusting the rheology and printing properties of ink media. This product is solvent-based and insoluble in water. It can be used to protect against drying inks out, even at high temperatures, and will decrease viscosity variations in the end product. 收起 | |
| Decoflux DP R 24 | Zschimmer & Schwarz GmbH & Co. KG Chemische Fabriken | Decoflux DP R 24 is an auxiliary for adjusting the rheology and printing properties of ink media. This product is solvent-based and insoluble in water. It can be used to protect against drying inks out, even at high temperatures, and will decrease viscosi...展開 Decoflux DP R 24 is an auxiliary for adjusting the rheology and printing properties of ink media. This product is solvent-based and insoluble in water. It can be used to protect against drying inks out, even at high temperatures, and will decrease viscosity variations in the end product. 收起 | |
| Digicer Primer 008 | Zschimmer & Schwarz GmbH & Co. KG Chemische Fabriken | Digicer Primer 008, in the form of a transparent liquid, is a mix of derivatives from ethylene and propylene oxides. This product can be used as a film-former on the surface of a glaze, in order to create an uniform suction behavior of the applied printi...展開 Digicer Primer 008, in the form of a transparent liquid, is a mix of derivatives from ethylene and propylene oxides. This product can be used as a film-former on the surface of a glaze, in order to create an uniform suction behavior of the applied printing ink by the glaze, which creates good preconditions for the decoration by digital printing technology. It decreases the vapour pressure of the water, which avoids condensation on the printing heads. It also improves the application of colour and reduces defects from inexact adjustment of the printing heads. 收起 | |
| Digicer TU 203 | Zschimmer & Schwarz GmbH & Co. KG Chemische Fabriken | Digicer TU 203, in the form of a yellow liquid, is a mix of block polymers. This product is a levelling agent for glazes to be applied after decoration by digital printing technology. The hydrophobic character of inks often do not permit perfect levelin...展開 Digicer TU 203, in the form of a yellow liquid, is a mix of block polymers. This product is a levelling agent for glazes to be applied after decoration by digital printing technology. The hydrophobic character of inks often do not permit perfect leveling of the glaze on the tile surface after the decoration by digital printing technology. This product in particular avoids repelling water. 收起 | |
| Granicer 7030 | Zschimmer & Schwarz GmbH & Co. KG Chemische Fabriken | Granicer 7030, in the form of a turbid, viscous liquid, is a preparation of polymers in an aqueous solution. This product allows the application of granules to tiles by airless, double disk, bell, or curtain coating machines, and to cover the complete sur...展開 Granicer 7030, in the form of a turbid, viscous liquid, is a preparation of polymers in an aqueous solution. This product allows the application of granules to tiles by airless, double disk, bell, or curtain coating machines, and to cover the complete surface of the tiles. It can be used in the fields of engraving and digital printing. This product is miscible in water. 收起 | |
| H-Sperse® 2000A | Harcros Chemicals, Inc. | H-Sperse® 2000A is a built for purpose dispersant which has been phosphated to give it unique anionic characteristics. The ionic phosphate groups bind tightly to a variety of inorganic materials, while the non-ionic hydrophobe portion will prevent agglome...展開 H-Sperse® 2000A is a built for purpose dispersant which has been phosphated to give it unique anionic characteristics. The ionic phosphate groups bind tightly to a variety of inorganic materials, while the non-ionic hydrophobe portion will prevent agglomeration and flocculation of many types of inorganic particulate materials. It is APE/NPE free, and exhibits very low toxicity. The phosphate functional group promotes excellent adhesion to the inorganic particulate giving good dispersion stability under difficult conditions, such as highly saline solutions. The phosphate groups can also enhance fire retardancy. In addition, the phosphate groups can also enhance corrosion resistance in coatings applied to metals. 收起 | |
| H-Sperse® 2000N | Harcros Chemicals, Inc. | H-Sperse® 2000N is a built for purpose, non-ionic polymeric dispersant designed for dispersing organic pigments and particles in aqueous applications. It is APE/NPE free, and exhibits very low toxicity. Useful for dispersing many organic particulates and ...展開 H-Sperse® 2000N is a built for purpose, non-ionic polymeric dispersant designed for dispersing organic pigments and particles in aqueous applications. It is APE/NPE free, and exhibits very low toxicity. Useful for dispersing many organic particulates and pigments in aqueous applications. It is especially useful for dispersing carbon black in inks and paints. Dispersions made using this material demonstrate long term viscosity stability. Typically, higher loadings can be achieved, with lower viscosity, compared to other commonly used dispersants. It is especially suitable for making carbon black dispersions for higher end ink and coatings applications. 收起 | |
| H-Sperse® 3000N | Harcros Chemicals, Inc. | H-Sperse® 3000N is a built for purpose, non-ionic polymeric dispersant designed for dispersing organic pigments and particles in aqueous applications. It is APE/NPE free, and exhibits very low toxicity. Useful for dispersing many organic particles and pig...展開 H-Sperse® 3000N is a built for purpose, non-ionic polymeric dispersant designed for dispersing organic pigments and particles in aqueous applications. It is APE/NPE free, and exhibits very low toxicity. Useful for dispersing many organic particles and pigments in aqueous applications. It is especially useful for dispersing carbon black in inks and paints. Dispersions made using this material demonstrate long term viscosity stability. Typically, higher loadings can be achieved, with lower viscosity, compared to other commonly used dispersants. It is especially suitable for making dispersions of carbon black for higher end ink and coatings applications. 收起 | |
| H-Sperse® 4000N | Harcros Chemicals, Inc. | H-Sperse® 4000N is a built for purpose, non-ionic polymeric dispersant designed for dispersing organic pigments and particles in aqueous applications. It is APE/NPE free, and exhibits very low toxicity. Dispersions made using this material demonstrate lon...展開 H-Sperse® 4000N is a built for purpose, non-ionic polymeric dispersant designed for dispersing organic pigments and particles in aqueous applications. It is APE/NPE free, and exhibits very low toxicity. Dispersions made using this material demonstrate long term viscosity stability. It is especially suitable for making carbon black dispersions for higher end ink and coatings applications. Excellent color strength may be achieved by using H-Sperse® 4000N. 收起 | |
| H-Sperse® 5500N | Harcros Chemicals, Inc. | H-Sperse® 5500N is a non-ionic polymeric dispersant designed for dispersing organic pigments and particles in aqueous applications. The hydrophobe used to make this material will attach to a wide variety of different particles making it valuble as a gener...展開 H-Sperse® 5500N is a non-ionic polymeric dispersant designed for dispersing organic pigments and particles in aqueous applications. The hydrophobe used to make this material will attach to a wide variety of different particles making it valuble as a general purpose dispersant. Dispersions made using H-Sperse® 5000N demonstrate long term viscosity stability. As a non-ionic dispersant, it makes dispersions that will be stable under a wide range of pH conditions, both acidic and basic. Viscosity may vary with pH, so this must be explored to determine the best pH for the application. It is especially suitable for making dispersions of carbon black. 收起 | |
| Harcryl® 1228 | Harcros Chemicals, Inc. | Harcryl® 1228 is a unique, functional, acrylic monomer consisting of mono- and di-phosphate esters of 2-Hydroxyethylmethacrylate. The ratio of mono-alkyl to di-alkyl phosphate allows Harcryl® 1228 to be easily incorporated into a variety of polymer system...展開 Harcryl® 1228 is a unique, functional, acrylic monomer consisting of mono- and di-phosphate esters of 2-Hydroxyethylmethacrylate. The ratio of mono-alkyl to di-alkyl phosphate allows Harcryl® 1228 to be easily incorporated into a variety of polymer systems. The polarity of Harcryl® 1228 provides for application in hydrophilic formulations as well. The primary use area for Harcryl® 1228 is emulsion polymerization. The phosphate functional group promotesadhesion to a variety of surfaces, reducing the need for pretreatments. Improving adhesion saves time and reduces layers from the coating process. Improved corrosion resistance due to the phosphate functional group reduces the need for additional inhibitors. The acrylic backbone allows Harcryl® 1228 to easily incorporate into many coating systems. 收起 | |
| Harcryl® 1228 M | Harcros Chemicals, Inc. | Harcryl® 1228 M is a free acid phosphate ester of 2-HEMA (hydroxyethylmethacrylate.) The product is inhibited with 400 ppm of added hydroquinone. Harcryl® 1228 M is predominatly composed of the mono-alkyl phosphate ester, allowing it to be easily incorpor...展開 Harcryl® 1228 M is a free acid phosphate ester of 2-HEMA (hydroxyethylmethacrylate.) The product is inhibited with 400 ppm of added hydroquinone. Harcryl® 1228 M is predominatly composed of the mono-alkyl phosphate ester, allowing it to be easily incorporated into a variety of polymer systems. The ratio of mono-alkyl to dialkyl phosphate makes Harcryl® 1228 M more hydrophilic than Harcryl® 1228. The main application for Harcryl® 1228M is emulsion polymerization. The phosphate functional group promotes adhesion to a variety of surfaces, reducing the need for pretreatments. Improving adhesion saves time and reduces layers from the coating process. Improved corrosion resistance due to the phosphate functional group reduces the need for additional inhibitors. The acrylic backbone allows Harcryl® 1228 M to be easily incorporated into many coating systems. 收起 | |
| Harcryl® 1228 M UV | Harcros Chemicals, Inc. | Harcryl® 1228 M UV is a free acid phosphate ester of 2-HEMA (hydroxyethylmethacrylate.) Harcryl® 1228 M UV is predominatly composed of the mono-alkyl phosphate ester, allowing it to be easily incorporated into a variety of polymer systems. The ratio of mo...展開 Harcryl® 1228 M UV is a free acid phosphate ester of 2-HEMA (hydroxyethylmethacrylate.) Harcryl® 1228 M UV is predominatly composed of the mono-alkyl phosphate ester, allowing it to be easily incorporated into a variety of polymer systems. The ratio of mono-alkyl to dialkyl phosphate makes Harcryl® 1228 M UV more hydrophilic than Harcryl® 1228. Harcryl® 1228 UV is UV curable coatings. The phosphate functional group promotes adhesion to a variety of surfaces, reducing the need for pretreatments. Improving adhesion saves time and reduces layers from the coating process. Improved corrosion resistance due to the phosphate functional group reduces the need for additional inhibitors. The acrylic backbone allows Harcryl® 1228 M UV to be easily incorporated into many coating systems. including UV & Radiation curable coatings. 收起 | |
| Harcryl® 1228 UV | Harcros Chemicals, Inc. | Harcryl® 1228 UV is a unique, functional, acrylic monomer consisting of mono and di-phosphate esters of 2-Hydroxyethylmethacrylate. The ratio of mono-alkyl to di-alkyl phosphate allows it to be easily incorporated into a variety of polymer systems. The po...展開 Harcryl® 1228 UV is a unique, functional, acrylic monomer consisting of mono and di-phosphate esters of 2-Hydroxyethylmethacrylate. The ratio of mono-alkyl to di-alkyl phosphate allows it to be easily incorporated into a variety of polymer systems. The polarity of Harcryl® 1228 UV provides for application in hydrophilic formulations as well. The main application for Harcryl® 1228 UV is UV curable coatings. The phosphate functional group promotes adhesion to a variety of surfaces, reducing the need for pretreatments. Improving adhesion saves time and reduces layers from the coating process. Improved corrosion resistance due to the phosphate functional group reduces the need for additional inhibitors. The acrylic backbone allows Harcryl® 1228 UV to easily incorporate into many coating systems including UV & Radiation curable coatings. 收起 | |
| L-2813 | Chan Sieh Enterprises Co, Ltd. | L-2813 is an aliphatic polyether polyol with a solid content ratio of 39%. This product is tough, solvent free, and compatible with acrylic emulsions. It can be used in peelable metal coatings, printing inks, fiberglass, floor coatings, and paper and te...展開 L-2813 is an aliphatic polyether polyol with a solid content ratio of 39%. This product is tough, solvent free, and compatible with acrylic emulsions. It can be used in peelable metal coatings, printing inks, fiberglass, floor coatings, and paper and textile coatings. 收起 | |
| L-2842 | Chan Sieh Enterprises Co, Ltd. | L-2842 is an aliphatic polyether polyol with a solid content ratio of 34%. This product provides good adhesion on flexible substrates and good solvent resistance. It can be used in printing inks, paper and textile coatings, and floor coatings. | |
| L-2869 | Chan Sieh Enterprises Co, Ltd. | L-2869 is an aliphatic polyether polyol with a solid content ratio of 39%. This product is tough, free of solvents, and is compatible with acrylic emulsions. It can be used in peelable metal coatings, printing ink and glass fiber, and floor, paper and t...展開 L-2869 is an aliphatic polyether polyol with a solid content ratio of 39%. This product is tough, free of solvents, and is compatible with acrylic emulsions. It can be used in peelable metal coatings, printing ink and glass fiber, and floor, paper and textile coatings. 收起 | |
| L-2908 | Chan Sieh Enterprises Co, Ltd. | L-2908 is an aliphatic polyester polyol with a solid content ratio of 33.5%. This product is hard, flexible and durable. It provides chemical, water, humidity, UV, and abrasion resistance. It can be used in screen and gravure inks, concrete and metal c...展開 L-2908 is an aliphatic polyester polyol with a solid content ratio of 33.5%. This product is hard, flexible and durable. It provides chemical, water, humidity, UV, and abrasion resistance. It can be used in screen and gravure inks, concrete and metal coatings, and to coat vinyl, wood, and plastic. 收起 | |
| L-2909 | Chan Sieh Enterprises Co, Ltd. | L-2909 is an aliphatic polyester polyol with a solid content ratio of 33.5%. This product is hard, flexible and durable. It provides chemical, water, humidity, UV, and abrasion resistance. It can be used in screen and gravure inks, and to coat concrete...展開 L-2909 is an aliphatic polyester polyol with a solid content ratio of 33.5%. This product is hard, flexible and durable. It provides chemical, water, humidity, UV, and abrasion resistance. It can be used in screen and gravure inks, and to coat concrete, metal, vinyl, wood and plastic. 收起 | |
| L-2911 | Chan Sieh Enterprises Co, Ltd. | L-2911 is an aliphatic polyester polyol with a solid content ratio of 30%. This product is soft and flexible. It provides non-yellowing abrasion resistance. It can be used in printing inks for pvc flooring, and to coat paper, leather, plastic, wood, an...展開 L-2911 is an aliphatic polyester polyol with a solid content ratio of 30%. This product is soft and flexible. It provides non-yellowing abrasion resistance. It can be used in printing inks for pvc flooring, and to coat paper, leather, plastic, wood, and parquet. 收起 | |
| L-2917 | Chan Sieh Enterprises Co, Ltd. | L-2917 is an aliphatic polyester polyol with a solid content ratio of 34%. This product is flexible and provides abrasion and chemical resistance. It is an excellent adhesive to plastic, and is compatible with acrylic emulsions. This product can be use...展開 L-2917 is an aliphatic polyester polyol with a solid content ratio of 34%. This product is flexible and provides abrasion and chemical resistance. It is an excellent adhesive to plastic, and is compatible with acrylic emulsions. This product can be used in printing inks, and to coat plastic, leather, concrete, metal, wood, and paper. 收起 | |
| L-2946 | Chan Sieh Enterprises Co, Ltd. | L-2946 is an aliphatic polyester polyol with a solid content ratio of 32%. This product provides solvent and blocking resistance, and is hard and flexible with good adhesion on flexible substrates. It can be used in printing ink, and to coat glass, conc...展開 L-2946 is an aliphatic polyester polyol with a solid content ratio of 32%. This product provides solvent and blocking resistance, and is hard and flexible with good adhesion on flexible substrates. It can be used in printing ink, and to coat glass, concrete, wood, and parquet. 收起 | |
| L-2976 | Chan Sieh Enterprises Co, Ltd. | L-2976 is an aliphatic polyester polyol with a solid content ratio of 33.8%. This product dries hard and fast, and offers chemical and abrasion resistance. It can be used in screen inks, and to coat metal, plastic, wood and parquet. | |
| L-2982 | Chan Sieh Enterprises Co, Ltd. | L-2982 is an aliphatic polyester polyol with a solid content ratio of 34%. This product is flexible, and provides humidity and abrasion resistance. It can be used in printing inks, and to coat metal, concrete, plastic, wood and parquet. | |
| L-2991 | Chan Sieh Enterprises Co, Ltd. | L-2991 is an aliphatic polyester polyol with a solid content ratio of 39%. This product is tough and flexible, adheres well to plastic, and is compatible with acrylic emulsions. It offers chemical and abrasion resistance. L-2991 can be used in printing...展開 L-2991 is an aliphatic polyester polyol with a solid content ratio of 39%. This product is tough and flexible, adheres well to plastic, and is compatible with acrylic emulsions. It offers chemical and abrasion resistance. L-2991 can be used in printing inks, and to coat plastic, leather, concrete, wood and parquet. 收起 | |
| L-2994 | Chan Sieh Enterprises Co, Ltd. | L-2994 is an aliphatic polyester polyol featuring good flexibility and adherence to plastic. This product is well suited for use in flexo and gravure printing inks. | |
| L-3042 | Chan Sieh Enterprises Co, Ltd. | L-3042 is an aliphatic polycarbonate polyol that is very hard, tough, and flexible. Featuring good chemical, solvent, water, humidity, and UV resistance, this product is well suited for use in applications such as PVC flooring topcoats, primers and coati...展開 L-3042 is an aliphatic polycarbonate polyol that is very hard, tough, and flexible. Featuring good chemical, solvent, water, humidity, and UV resistance, this product is well suited for use in applications such as PVC flooring topcoats, primers and coatings for metal and plastic surfaces, lacquers and coatings for wood and parquet floors, overprint varnishes, furniture coatings, and textured coatings. 收起 | |
| L-3410 | Chan Sieh Enterprises Co, Ltd. | L-3410 is an ultraviolet-curable polyol with a solid-content ratio of 39,8%. This product is hard and flexible, and provides abrasion, chemical and stain resistance. It can be used in PVC and non-PVC floor coatings, to coat furniture, paper, plastic, wo...展開 L-3410 is an ultraviolet-curable polyol with a solid-content ratio of 39,8%. This product is hard and flexible, and provides abrasion, chemical and stain resistance. It can be used in PVC and non-PVC floor coatings, to coat furniture, paper, plastic, wood, parquet, overprint varnishes, and inks. 收起 | |
| L-3952 | Chan Sieh Enterprises Co, Ltd. | L-3952 is an aqueous polyurethane acrylate copolymer that provides excellent chemical resistance and BHMR. This product can be used in flat parquet lacquers, printing inks, and decorative paints. | |
| Leafing Aluminum Paste BT-AP400 | BioTio Group | Leafing Aluminum Paste BT-AP400 is a high pure aluminum powder that has a pigment content of 65±2% and a leafing value of ≥65%. This product is most commonly used to resist heat and corrosion in marine paint and roof coatings, industrial coatings, inks, d...展開 Leafing Aluminum Paste BT-AP400 is a high pure aluminum powder that has a pigment content of 65±2% and a leafing value of ≥65%. This product is most commonly used to resist heat and corrosion in marine paint and roof coatings, industrial coatings, inks, decorative and reflective finishes coating, and anti-corrosive coatings. 收起 | |
| Leafing Aluminum Paste BT-AP401 | BioTio Group | Leafing Aluminum Paste BT-AP401 is a high pure aluminum powder that has a pigment content of 65±2% and a leafing value of ≥75%. This product is most commonly used to resist heat and corrosion in marine paint and roof coatings, industrial coatings, inks, d...展開 Leafing Aluminum Paste BT-AP401 is a high pure aluminum powder that has a pigment content of 65±2% and a leafing value of ≥75%. This product is most commonly used to resist heat and corrosion in marine paint and roof coatings, industrial coatings, inks, decorative and reflective finishes coating, and anti-corrosive coatings. 收起 | |
| Leafing Aluminum Paste BT-AP402 | BioTio Group | Leafing Aluminum Paste BT-AP402 is a high pure aluminum powder that has a pigment content of 65±2% and a leafing value of ≥78%. This product is most commonly used to resist heat and corrosion in marine paint and roof coatings, industrial coatings, inks, d...展開 Leafing Aluminum Paste BT-AP402 is a high pure aluminum powder that has a pigment content of 65±2% and a leafing value of ≥78%. This product is most commonly used to resist heat and corrosion in marine paint and roof coatings, industrial coatings, inks, decorative and reflective finishes coating, and anti-corrosive coatings. 收起 | |
| Leafing Aluminum Paste BT-AP403 | BioTio Group | Leafing Aluminum Paste BT-AP403 is a high pure aluminum powder that has a pigment content of 65±2% and a leafing value of ≥82%. This product is most commonly used to resist heat and corrosion in marine paint and roof coatings, industrial coatings, inks, d...展開 Leafing Aluminum Paste BT-AP403 is a high pure aluminum powder that has a pigment content of 65±2% and a leafing value of ≥82%. This product is most commonly used to resist heat and corrosion in marine paint and roof coatings, industrial coatings, inks, decorative and reflective finishes coating, and anti-corrosive coatings. 收起 | |
| Leafing Aluminum Paste BT-AP404 | BioTio Group | Leafing Aluminum Paste BT-AP404 is a high pure aluminum powder that has a pigment content of 73±2% and a leafing value of ≥78%. This product is most commonly used to resist heat and corrosion in marine paint and roof coatings, industrial coatings, inks, d...展開 Leafing Aluminum Paste BT-AP404 is a high pure aluminum powder that has a pigment content of 73±2% and a leafing value of ≥78%. This product is most commonly used to resist heat and corrosion in marine paint and roof coatings, industrial coatings, inks, decorative and reflective finishes coating, and anti-corrosive coatings. 收起 | |
| Lemon Chrome | Unilex Colours & Chemicals Ltd. | Lemon Chrome is a yellow chrome pigment. This product has high color strength and highly soluble properties. It has a specific gravity of 5 and a pH of 5-7, and is suitable for dispersions, printing inks, protective coatings, and liquid inks. | |
| LITHOPONE BT-IN600 | BioTio Group | LITHOPONE BT-IN600 is a white powder with a zinc sulfide content of ≥28% and a pH value of 7.2. This product is most commonly used in printing inks, marking paints, and coating applications. | |
| Middle Chrome | Unilex Colours & Chemicals Ltd. | Middle Chrome is a yellow chrome pigment. This product has high color strength and highly soluble properties, and it has a specific gravity of 5 and a pH of 5-7. It is often used in printing inks, liquid ink, and protective coatings. | |
| P-103 | Chan Sieh Enterprises Co, Ltd. | P-103 is a self-crosslinking acrylic resin in the form of a white emulsion. This product provides good flexibility, washability, color value, and pigment adhesion. It can be used as a binder for pigment printing. | |
| P-103H | Chan Sieh Enterprises Co, Ltd. | P-103H is a self-crosslinking acrylic resin in the form of a white emulsion. This product provides good flexibility, washability, color value, and pigment adhesion. It can be used as a binder for pigment printing. | |
| P-103H-1 | Chan Sieh Enterprises Co, Ltd. | P-103H-1 is a self-crosslinking acrylic resin in the form of a white emulsion. This product provides good flexibility, washability, color value and pigment adhesion. It can be used as a binder for pigment printing. | |
| P-104 | Chan Sieh Enterprises Co, Ltd. | P-104 is a self-crosslinking acrylic resin in the form of a white emulsion. This product provides good flexibility, washability, color value and pigment adhesion. It can be used as a binder for pigment printing. | |
| P-104H | Chan Sieh Enterprises Co, Ltd. | P-104H is a self-crosslinking acrylic resin in the form of a white emulsion. This product provides good flexibility, washability, color value and pigment adhesion. It can be used as a binder for pigment printing. | |
| P-125U | Chan Sieh Enterprises Co, Ltd. | P-125U is a self-crosslinking styrene acrylic copolymer in the form of a transparent emulsion. This product provides good flexibility, washability, color value and pigment adhesion. It can be used as a binder for pigment printing. | |
| P-145U | Chan Sieh Enterprises Co, Ltd. | P-145U is a self-crosslinking styrene acrylic copolymer in the form of a yellowish transparent emulsion. This product provides good flexibility, washability, color value and pigment adhesion. It can be used as a binder for pigment printing. | |
| P-155U | Chan Sieh Enterprises Co, Ltd. | P-155U is a self-crosslinking styrene acrylic copolymer in the form of a transparent emulsion. This product provides good flexibility, washability, color value, and pigment adhesion. It can be used as a binder for pigment printing. | |
| P-2026 | Chan Sieh Enterprises Co, Ltd. | P-2026 is a vinyl acetate acrylic copolymer in the form of a white emulsion. This product has good color value and pigment adhesion. It can be used as a binder for pigment printing. It is suitable for cotton fabrics. | |
| P-645 | Chan Sieh Enterprises Co, Ltd. | P-645 is a self-crosslinking acrylic resin in the form of a yellowish transparent emulsion. This product has good flexibility, washability, color value, and pigment adhesion. It can be used as a binder for pigment printing. | |
| PB-145 | Chan Sieh Enterprises Co, Ltd. | PB-145 is a self-crosslinking styrene acrylic copolymer in the form of a yellowish transparent emulsion. This product has good flexibility, washability, color value and pigment adhesion. It can be used as a binder for pigment printing. | |
| PB-155 | Chan Sieh Enterprises Co, Ltd. | PB-155 is a self-crosslinking styrene acrylic copolymer in the form of a white emulsion. This product has good flexibility, washability, color value and pigment adhesion. It can be used as a binder for pigment printing. | |
| Precipitated Barium Sulfate BT-IN601 | BioTio Group | Precipitated Barium Sulfate BT-IN601 is a white powder with a barium sulfate content of 98% and a maximum whiteness of 93. This product is most commonly used as a filler in printing ink, paint, surface coating, coated art paper, and dye applications. | |
| Prime Rose Chrome | Unilex Colours & Chemicals Ltd. | Prime Rose Chrome is a yellow chrome pigment. This product has high color strength and highly soluble properties, and it has a specific gravity of 5 and a pH of 5-7. It is often used in printing inks, liquid ink, and protective coatings. | |
| Scarlet Chrome | Unilex Colours & Chemicals Ltd. | Scarlet Chrome is a red chrome pigment. This product has high color strength and highly soluble properties, and it has a specific gravity of 6 and a pH of 5-7. It is often used in printing inks, liquid ink, and protective coatings. | |
| Sodium Alginate BT-IN607 | BioTio Group | Sodium Alginate BT-IN607 is a 40-mesh sized, light yellow powder that has a pH value of 6.0-7.0. This product is most commonly used as a thickener in reactive dyestuff, textile screen-printing, and carpet jet-printing applications. | |
| Synthetic Black Oxide | Unilex Colours & Chemicals Ltd. | Synthetic Black Oxide is a black inorganic pigment. This product has a specific gravity of 3.5-5.5 and a pH of 5-8. It is non-toxic and durable, and is suitable for inks, paints, and coatings. | |
| Synthetic Orange Oxide | Unilex Colours & Chemicals Ltd. | Synthetic Orange Oxide is an orange inorganic pigment. This product has a specific gravity of 3.5-5.5 and a pH of 3-7. It is non-toxic and durable, and is suitable for paints, coatings, and inks. | |
| Synthetic Red Oxide | Unilex Colours & Chemicals Ltd. | Synthetic Red Oxide is a red inorganic pigment. This product has a specific gravity of 4 and a pH of 5-7. It is non-toxic and durable, and is suitable for paints, coatings, and inks. | |
| Synthetic Yellow Oxide | Unilex Colours & Chemicals Ltd. | Synthetic Yellow Oxide is a yellow inorganic pigment. This product has a specific gravity of 4 and a pH of 4-7. It is non-toxic and durable, and is suitable for paints, coatings, and inks. | |
| Titanium Dioxide Anatase BT-A11 | BioTio Group | Titanium Dioxide Anatase BT-A11 is a white powder that has a titanium dioxide content of ≤93% and a pH value of 6.5-8.0. This product is most commonly used in exterior, water-based, and powder coating, emulsion paints, and printing ink applications. | |
| Titanium Dioxide Anatase BT-A113 | BioTio Group | Titanium Dioxide Anatase BT-A113 is a white powder that has a titanium dioxide content of ≥95% and a pH value of 6.5-8.0. This product is most commonly used in exterior, water-based, and powder coating, emulsion paints, and printing ink applications. | |
| Titanium Dioxide Anatase BT-A114 | BioTio Group | Titanium Dioxide Anatase BT-A114 is a white powder that has a titanium dioxide content of ≥98% and a pH value of 6.5-8.0. This product is most commonly used in exterior, water-based, and powder coating, emulsion paints, and printing ink applications. | |
| Titanium Dioxide Rutile BT-R22 | BioTio Group | Titanium Dioxide Rutile BT-R22 is a white powder that has a titanium dioxide content of ≤90% and a pH value of 6.5-8.0. This product is most commonly used in exterior, water-based, and powder coating, road marking and emulsion paint, and printing ink appl...展開 Titanium Dioxide Rutile BT-R22 is a white powder that has a titanium dioxide content of ≤90% and a pH value of 6.5-8.0. This product is most commonly used in exterior, water-based, and powder coating, road marking and emulsion paint, and printing ink applications. 收起 | |
| Titanium Dioxide Rutile BT-R225 | BioTio Group | Titanium Dioxide Rutile BT-R225 is a white powder that has a titanium dioxide content of ≥93% and a pH value of 6.5-8.0. This product is most commonly used in exterior, water-based, and powder coating, road marking and emulsion paint, and printing ink app...展開 Titanium Dioxide Rutile BT-R225 is a white powder that has a titanium dioxide content of ≥93% and a pH value of 6.5-8.0. This product is most commonly used in exterior, water-based, and powder coating, road marking and emulsion paint, and printing ink applications. 收起 | |
| Titanium Dioxide Rutile BT-R226 | BioTio Group | Titanium Dioxide Rutile BT-R226 is a white powder that has a titanium dioxide content of ≥95% and a pH value of 6.0-8.5. This product is most commonly used in exterior, water-based, and powder coating, road marking and emulsion paint, and printing ink app...展開 Titanium Dioxide Rutile BT-R226 is a white powder that has a titanium dioxide content of ≥95% and a pH value of 6.0-8.5. This product is most commonly used in exterior, water-based, and powder coating, road marking and emulsion paint, and printing ink applications. 收起 | |
| Trucolor 206 Beige | Zschimmer & Schwarz GmbH & Co. KG Chemische Fabriken | Trucolor 206 Beige is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with beige ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are s...展開 Trucolor 206 Beige is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with beige ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are stored at least 1 day at production temperature before usage. 收起 | |
| Trucolor 206 Beige S | Zschimmer & Schwarz GmbH & Co. KG Chemische Fabriken | Trucolor 206 Beige S is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with beige ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are st...展開 Trucolor 206 Beige S is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with beige ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are stored at least 1 day at production temperature before usage. 收起 | |
| Trucolor 207 Blue HT | Zschimmer & Schwarz GmbH & Co. KG Chemische Fabriken | Trucolor 207 Blue HT is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with blue ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are sto...展開 Trucolor 207 Blue HT is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with blue ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are stored at least 1 day at production temperature before usage. 收起 | |
| Trucolor 209 Pink | Zschimmer & Schwarz GmbH & Co. KG Chemische Fabriken | Trucolor 209 Pink is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with pink ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are stored...展開 Trucolor 209 Pink is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with pink ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are stored at least 1 day at production temperature before usage. 收起 | |
| Trucolor 209 Pink S | Zschimmer & Schwarz GmbH & Co. KG Chemische Fabriken | Trucolor 209 Pink S is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with pink ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are stor...展開 Trucolor 209 Pink S is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with pink ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are stored at least 1 day at production temperature before usage. 收起 | |
| Trucolor 210 Redbrown | Zschimmer & Schwarz GmbH & Co. KG Chemische Fabriken | Trucolor 210 Redbrown is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with reddish-brown ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the in...展開 Trucolor 210 Redbrown is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with reddish-brown ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are stored at least 1 day at production temperature before usage. 收起 | |
| Trucolor 210 Redbrown S | Zschimmer & Schwarz GmbH & Co. KG Chemische Fabriken | Trucolor 210 Redbrown S is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with reddish-brown ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the ...展開 Trucolor 210 Redbrown S is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with reddish-brown ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are stored at least 1 day at production temperature before usage. 收起 | |
| Trucolor 211 Yellow | Zschimmer & Schwarz GmbH & Co. KG Chemische Fabriken | Trucolor 211 Yellow is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with yellow ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are st...展開 Trucolor 211 Yellow is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with yellow ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are stored at least 1 day at production temperature before usage. 收起 | |
| Trucolor 211 Yellow S | Zschimmer & Schwarz GmbH & Co. KG Chemische Fabriken | Trucolor 211 Yellow S is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with yellow ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are ...展開 Trucolor 211 Yellow S is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with yellow ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are stored at least 1 day at production temperature before usage. 收起 | |
| Trucolor 217 Black | Zschimmer & Schwarz GmbH & Co. KG Chemische Fabriken | Trucolor 217 Black is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with black ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are stor...展開 Trucolor 217 Black is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with black ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are stored at least 1 day at production temperature before usage. 收起 | |
| Trucolor 217 Black S | Zschimmer & Schwarz GmbH & Co. KG Chemische Fabriken | Trucolor 217 Black S is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with black ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are st...展開 Trucolor 217 Black S is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with black ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are stored at least 1 day at production temperature before usage. 收起 | |
| Trucolor 219 Blue | Zschimmer & Schwarz GmbH & Co. KG Chemische Fabriken | Trucolor 219 Blue is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with blue ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are stored...展開 Trucolor 219 Blue is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with blue ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are stored at least 1 day at production temperature before usage. 收起 | |
| Trucolor 219 Blue S | Zschimmer & Schwarz GmbH & Co. KG Chemische Fabriken | Trucolor 219 Blue S is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with blue ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are stor...展開 Trucolor 219 Blue S is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with blue ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are stored at least 1 day at production temperature before usage. 收起 | |
| Trucolor 236 Orange | Zschimmer & Schwarz GmbH & Co. KG Chemische Fabriken | Trucolor 236 Orange is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with orange ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are st...展開 Trucolor 236 Orange is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with orange ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are stored at least 1 day at production temperature before usage. 收起 | |
| Trucolor 236 Orange S | Zschimmer & Schwarz GmbH & Co. KG Chemische Fabriken | Trucolor 236 Orange S is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with orange ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are ...展開 Trucolor 236 Orange S is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with orange ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are stored at least 1 day at production temperature before usage. 收起 | |
| Trucolor 242 White | Zschimmer & Schwarz GmbH & Co. KG Chemische Fabriken | Trucolor 242 White is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with white ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are stor...展開 Trucolor 242 White is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with white ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are stored at least 1 day at production temperature before usage. 收起 | |
| Trucolor 242 White S | Zschimmer & Schwarz GmbH & Co. KG Chemische Fabriken | Trucolor 242 White S is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with white ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are st...展開 Trucolor 242 White S is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with white ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are stored at least 1 day at production temperature before usage. 收起 | |
| Trucolor 281 Redorange | Zschimmer & Schwarz GmbH & Co. KG Chemische Fabriken | Trucolor 281 Redorange is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with reddish-orange ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the ...展開 Trucolor 281 Redorange is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with reddish-orange ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are stored at least 1 day at production temperature before usage. 收起 | |
| Trucolor 285 Green | Zschimmer & Schwarz GmbH & Co. KG Chemische Fabriken | Trucolor 285 Green is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with green ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are stor...展開 Trucolor 285 Green is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with green ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are stored at least 1 day at production temperature before usage. 收起 | |
| Trucolor EF 245 | Zschimmer & Schwarz GmbH & Co. KG Chemische Fabriken | Trucolor EF 245 is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with transparent effects in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the ink...展開 Trucolor EF 245 is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with transparent effects in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are stored at least 1 day at production temperature before usage. 收起 | |
| Trucolor EF 245 S | Zschimmer & Schwarz GmbH & Co. KG Chemische Fabriken | Trucolor EF 245 S is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with transparent effects in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks...展開 Trucolor EF 245 S is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with transparent effects in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are stored at least 1 day at production temperature before usage. 收起 | |
| Unifast Blue 15:0 | Unilex Colours & Chemicals Ltd. | Unifast Blue 15:0 is a blue phthalocyanine pigment. This product has a specific gravity of 1.5 and a pH of 7. It is often used in the preparation of inks, paints, plastics, and others. | |
| Unifast Blue 15:3 | Unilex Colours & Chemicals Ltd. | Unifast Blue 15:3 is a blue phthalocyanine pigment. This product has a specific gravity of 1.6 and a pH of 7. It is often used in the preparation of inks, paints, plastics, and others. | |
| Unifast Blue 15:4 | Unilex Colours & Chemicals Ltd. | Unifast Blue 15:4 is a blue phthalocyanine pigment. This product has a specific gravity of 1.7 and a pH of 7. It is used in the preparation of paints, plastics, and solvent based inks. | |
| Unifast Green 7 | Unilex Colours & Chemicals Ltd. | Unifast Green 7 is a green phthalocyanine pigment. This product has a specific gravity of 1.6 and a pH of 7. It is used in the preparation of paints, plastics, and solvent based inks. | |
| Unifast Orange 13 | Unilex Colours & Chemicals Ltd. | Unifast Orange 13 is an orange organic pigment that is non-toxic and has good purity, durability, and strength. This product has a specific gravity of 1.5 and a pH of 7. It is suitable for dispersions, inks, and paints. | |
| Unifast Orange 34 | Unilex Colours & Chemicals Ltd. | Unifast Orange 34 is an orange organic pigment that is non-toxic and has good purity, durability, and strength. This product has a specific gravity of 1.4 and a pH of 6.5. It is suitable for dispersions, inks, and paints. |
