| BT-B101 BRONOPOL | BioTio Group | BT-B101 BRONOPOL is a white crystalline powder that has a melting point of 126-131°C and a pH value of 5.0-7.0. This product is most commonly used as a broad-spectrum antimicrobial agent in coatings, paints, inks, and adhesive applications. | |
| BT-IN603 DTSA | BioTio Group | BT-IN603 DTSA is an off-white to light yellow powder that has a melting point of 280-290°C and a moisture content of ≤0.10%. This product is most commonly used as a chemical intermediate in dyes and biocides. | |
| BT-IN604 DCPI | BioTio Group | BT-IN604 DCPI is a white crystalline powder that has a content/assay of ≥98% and other isocyanate content of ≤1.0%. This product is most commonly used as an intermediate for the production of dyes. | |
| Decoflux DP 210 Redbrown | Zschimmer & Schwarz GmbH & Co. KG Chemische Fabriken | Decoflux DP 210 Redbrown is a grinding vehicle. This product is insoluble in water and can be used in the production of reddish brown inks in digital printing applications. The end user will have to determine and adapt the required ratio of solids conte...展開 Decoflux DP 210 Redbrown is a grinding vehicle. This product is insoluble in water and can be used in the production of reddish brown inks in digital printing applications. The end user will have to determine and adapt the required ratio of solids content and media. 收起 | |
| Decoflux DP 211 Yellow | Zschimmer & Schwarz GmbH & Co. KG Chemische Fabriken | Decoflux DP 211 Yellow is a grinding vehicle. This product is insoluble in water and can be used in the production of yellowish-brown inks in digital printing applications. The end user will have to determine and adapt the required ratio of solids content...展開 Decoflux DP 211 Yellow is a grinding vehicle. This product is insoluble in water and can be used in the production of yellowish-brown inks in digital printing applications. The end user will have to determine and adapt the required ratio of solids content and media. 收起 | |
| Decoflux DP R 12 | Zschimmer & Schwarz GmbH & Co. KG Chemische Fabriken | Decoflux DP R 12 is an auxiliary for adjusting the rheology and printing properties of ink media. This product is solvent-based and insoluble in water. It can be used to protect against drying inks out, even at high temperatures, and will decrease visco...展開 Decoflux DP R 12 is an auxiliary for adjusting the rheology and printing properties of ink media. This product is solvent-based and insoluble in water. It can be used to protect against drying inks out, even at high temperatures, and will decrease viscosity variations in the end product. 收起 | |
| Decoflux DP R 24 | Zschimmer & Schwarz GmbH & Co. KG Chemische Fabriken | Decoflux DP R 24 is an auxiliary for adjusting the rheology and printing properties of ink media. This product is solvent-based and insoluble in water. It can be used to protect against drying inks out, even at high temperatures, and will decrease viscosi...展開 Decoflux DP R 24 is an auxiliary for adjusting the rheology and printing properties of ink media. This product is solvent-based and insoluble in water. It can be used to protect against drying inks out, even at high temperatures, and will decrease viscosity variations in the end product. 收起 | |
| Digicer Primer 008 | Zschimmer & Schwarz GmbH & Co. KG Chemische Fabriken | Digicer Primer 008, in the form of a transparent liquid, is a mix of derivatives from ethylene and propylene oxides. This product can be used as a film-former on the surface of a glaze, in order to create an uniform suction behavior of the applied printi...展開 Digicer Primer 008, in the form of a transparent liquid, is a mix of derivatives from ethylene and propylene oxides. This product can be used as a film-former on the surface of a glaze, in order to create an uniform suction behavior of the applied printing ink by the glaze, which creates good preconditions for the decoration by digital printing technology. It decreases the vapour pressure of the water, which avoids condensation on the printing heads. It also improves the application of colour and reduces defects from inexact adjustment of the printing heads. 收起 | |
| Digicer TU 203 | Zschimmer & Schwarz GmbH & Co. KG Chemische Fabriken | Digicer TU 203, in the form of a yellow liquid, is a mix of block polymers. This product is a levelling agent for glazes to be applied after decoration by digital printing technology. The hydrophobic character of inks often do not permit perfect levelin...展開 Digicer TU 203, in the form of a yellow liquid, is a mix of block polymers. This product is a levelling agent for glazes to be applied after decoration by digital printing technology. The hydrophobic character of inks often do not permit perfect leveling of the glaze on the tile surface after the decoration by digital printing technology. This product in particular avoids repelling water. 收起 | |
| Granicer 7030 | Zschimmer & Schwarz GmbH & Co. KG Chemische Fabriken | Granicer 7030, in the form of a turbid, viscous liquid, is a preparation of polymers in an aqueous solution. This product allows the application of granules to tiles by airless, double disk, bell, or curtain coating machines, and to cover the complete sur...展開 Granicer 7030, in the form of a turbid, viscous liquid, is a preparation of polymers in an aqueous solution. This product allows the application of granules to tiles by airless, double disk, bell, or curtain coating machines, and to cover the complete surface of the tiles. It can be used in the fields of engraving and digital printing. This product is miscible in water. 收起 | |
| H-Sperse® 2000A | Harcros Chemicals, Inc. | H-Sperse® 2000A is a built for purpose dispersant which has been phosphated to give it unique anionic characteristics. The ionic phosphate groups bind tightly to a variety of inorganic materials, while the non-ionic hydrophobe portion will prevent agglome...展開 H-Sperse® 2000A is a built for purpose dispersant which has been phosphated to give it unique anionic characteristics. The ionic phosphate groups bind tightly to a variety of inorganic materials, while the non-ionic hydrophobe portion will prevent agglomeration and flocculation of many types of inorganic particulate materials. It is APE/NPE free, and exhibits very low toxicity. The phosphate functional group promotes excellent adhesion to the inorganic particulate giving good dispersion stability under difficult conditions, such as highly saline solutions. The phosphate groups can also enhance fire retardancy. In addition, the phosphate groups can also enhance corrosion resistance in coatings applied to metals. 收起 | |
| H-Sperse® 2000N | Harcros Chemicals, Inc. | H-Sperse® 2000N is a built for purpose, non-ionic polymeric dispersant designed for dispersing organic pigments and particles in aqueous applications. It is APE/NPE free, and exhibits very low toxicity. Useful for dispersing many organic particulates and ...展開 H-Sperse® 2000N is a built for purpose, non-ionic polymeric dispersant designed for dispersing organic pigments and particles in aqueous applications. It is APE/NPE free, and exhibits very low toxicity. Useful for dispersing many organic particulates and pigments in aqueous applications. It is especially useful for dispersing carbon black in inks and paints. Dispersions made using this material demonstrate long term viscosity stability. Typically, higher loadings can be achieved, with lower viscosity, compared to other commonly used dispersants. It is especially suitable for making carbon black dispersions for higher end ink and coatings applications. 收起 | |
| H-Sperse® 3000N | Harcros Chemicals, Inc. | H-Sperse® 3000N is a built for purpose, non-ionic polymeric dispersant designed for dispersing organic pigments and particles in aqueous applications. It is APE/NPE free, and exhibits very low toxicity. Useful for dispersing many organic particles and pig...展開 H-Sperse® 3000N is a built for purpose, non-ionic polymeric dispersant designed for dispersing organic pigments and particles in aqueous applications. It is APE/NPE free, and exhibits very low toxicity. Useful for dispersing many organic particles and pigments in aqueous applications. It is especially useful for dispersing carbon black in inks and paints. Dispersions made using this material demonstrate long term viscosity stability. Typically, higher loadings can be achieved, with lower viscosity, compared to other commonly used dispersants. It is especially suitable for making dispersions of carbon black for higher end ink and coatings applications. 收起 | |
| H-Sperse® 4000N | Harcros Chemicals, Inc. | H-Sperse® 4000N is a built for purpose, non-ionic polymeric dispersant designed for dispersing organic pigments and particles in aqueous applications. It is APE/NPE free, and exhibits very low toxicity. Dispersions made using this material demonstrate lon...展開 H-Sperse® 4000N is a built for purpose, non-ionic polymeric dispersant designed for dispersing organic pigments and particles in aqueous applications. It is APE/NPE free, and exhibits very low toxicity. Dispersions made using this material demonstrate long term viscosity stability. It is especially suitable for making carbon black dispersions for higher end ink and coatings applications. Excellent color strength may be achieved by using H-Sperse® 4000N. 收起 | |
| H-Sperse® 5500N | Harcros Chemicals, Inc. | H-Sperse® 5500N is a non-ionic polymeric dispersant designed for dispersing organic pigments and particles in aqueous applications. The hydrophobe used to make this material will attach to a wide variety of different particles making it valuble as a gener...展開 H-Sperse® 5500N is a non-ionic polymeric dispersant designed for dispersing organic pigments and particles in aqueous applications. The hydrophobe used to make this material will attach to a wide variety of different particles making it valuble as a general purpose dispersant. Dispersions made using H-Sperse® 5000N demonstrate long term viscosity stability. As a non-ionic dispersant, it makes dispersions that will be stable under a wide range of pH conditions, both acidic and basic. Viscosity may vary with pH, so this must be explored to determine the best pH for the application. It is especially suitable for making dispersions of carbon black. 收起 | |
| Harcryl® 1228 | Harcros Chemicals, Inc. | Harcryl® 1228 is a unique, functional, acrylic monomer consisting of mono- and di-phosphate esters of 2-Hydroxyethylmethacrylate. The ratio of mono-alkyl to di-alkyl phosphate allows Harcryl® 1228 to be easily incorporated into a variety of polymer system...展開 Harcryl® 1228 is a unique, functional, acrylic monomer consisting of mono- and di-phosphate esters of 2-Hydroxyethylmethacrylate. The ratio of mono-alkyl to di-alkyl phosphate allows Harcryl® 1228 to be easily incorporated into a variety of polymer systems. The polarity of Harcryl® 1228 provides for application in hydrophilic formulations as well. The primary use area for Harcryl® 1228 is emulsion polymerization. The phosphate functional group promotesadhesion to a variety of surfaces, reducing the need for pretreatments. Improving adhesion saves time and reduces layers from the coating process. Improved corrosion resistance due to the phosphate functional group reduces the need for additional inhibitors. The acrylic backbone allows Harcryl® 1228 to easily incorporate into many coating systems. 收起 | |
| Harcryl® 1228 M | Harcros Chemicals, Inc. | Harcryl® 1228 M is a free acid phosphate ester of 2-HEMA (hydroxyethylmethacrylate.) The product is inhibited with 400 ppm of added hydroquinone. Harcryl® 1228 M is predominatly composed of the mono-alkyl phosphate ester, allowing it to be easily incorpor...展開 Harcryl® 1228 M is a free acid phosphate ester of 2-HEMA (hydroxyethylmethacrylate.) The product is inhibited with 400 ppm of added hydroquinone. Harcryl® 1228 M is predominatly composed of the mono-alkyl phosphate ester, allowing it to be easily incorporated into a variety of polymer systems. The ratio of mono-alkyl to dialkyl phosphate makes Harcryl® 1228 M more hydrophilic than Harcryl® 1228. The main application for Harcryl® 1228M is emulsion polymerization. The phosphate functional group promotes adhesion to a variety of surfaces, reducing the need for pretreatments. Improving adhesion saves time and reduces layers from the coating process. Improved corrosion resistance due to the phosphate functional group reduces the need for additional inhibitors. The acrylic backbone allows Harcryl® 1228 M to be easily incorporated into many coating systems. 收起 | |
| Harcryl® 1228 M UV | Harcros Chemicals, Inc. | Harcryl® 1228 M UV is a free acid phosphate ester of 2-HEMA (hydroxyethylmethacrylate.) Harcryl® 1228 M UV is predominatly composed of the mono-alkyl phosphate ester, allowing it to be easily incorporated into a variety of polymer systems. The ratio of mo...展開 Harcryl® 1228 M UV is a free acid phosphate ester of 2-HEMA (hydroxyethylmethacrylate.) Harcryl® 1228 M UV is predominatly composed of the mono-alkyl phosphate ester, allowing it to be easily incorporated into a variety of polymer systems. The ratio of mono-alkyl to dialkyl phosphate makes Harcryl® 1228 M UV more hydrophilic than Harcryl® 1228. Harcryl® 1228 UV is UV curable coatings. The phosphate functional group promotes adhesion to a variety of surfaces, reducing the need for pretreatments. Improving adhesion saves time and reduces layers from the coating process. Improved corrosion resistance due to the phosphate functional group reduces the need for additional inhibitors. The acrylic backbone allows Harcryl® 1228 M UV to be easily incorporated into many coating systems. including UV & Radiation curable coatings. 收起 | |
| Harcryl® 1228 UV | Harcros Chemicals, Inc. | Harcryl® 1228 UV is a unique, functional, acrylic monomer consisting of mono and di-phosphate esters of 2-Hydroxyethylmethacrylate. The ratio of mono-alkyl to di-alkyl phosphate allows it to be easily incorporated into a variety of polymer systems. The po...展開 Harcryl® 1228 UV is a unique, functional, acrylic monomer consisting of mono and di-phosphate esters of 2-Hydroxyethylmethacrylate. The ratio of mono-alkyl to di-alkyl phosphate allows it to be easily incorporated into a variety of polymer systems. The polarity of Harcryl® 1228 UV provides for application in hydrophilic formulations as well. The main application for Harcryl® 1228 UV is UV curable coatings. The phosphate functional group promotes adhesion to a variety of surfaces, reducing the need for pretreatments. Improving adhesion saves time and reduces layers from the coating process. Improved corrosion resistance due to the phosphate functional group reduces the need for additional inhibitors. The acrylic backbone allows Harcryl® 1228 UV to easily incorporate into many coating systems including UV & Radiation curable coatings. 收起 | |
| Leafing Aluminum Paste BT-AP400 | BioTio Group | Leafing Aluminum Paste BT-AP400 is a high pure aluminum powder that has a pigment content of 65±2% and a leafing value of ≥65%. This product is most commonly used to resist heat and corrosion in marine paint and roof coatings, industrial coatings, inks, d...展開 Leafing Aluminum Paste BT-AP400 is a high pure aluminum powder that has a pigment content of 65±2% and a leafing value of ≥65%. This product is most commonly used to resist heat and corrosion in marine paint and roof coatings, industrial coatings, inks, decorative and reflective finishes coating, and anti-corrosive coatings. 收起 | |
| Leafing Aluminum Paste BT-AP401 | BioTio Group | Leafing Aluminum Paste BT-AP401 is a high pure aluminum powder that has a pigment content of 65±2% and a leafing value of ≥75%. This product is most commonly used to resist heat and corrosion in marine paint and roof coatings, industrial coatings, inks, d...展開 Leafing Aluminum Paste BT-AP401 is a high pure aluminum powder that has a pigment content of 65±2% and a leafing value of ≥75%. This product is most commonly used to resist heat and corrosion in marine paint and roof coatings, industrial coatings, inks, decorative and reflective finishes coating, and anti-corrosive coatings. 收起 | |
| Leafing Aluminum Paste BT-AP402 | BioTio Group | Leafing Aluminum Paste BT-AP402 is a high pure aluminum powder that has a pigment content of 65±2% and a leafing value of ≥78%. This product is most commonly used to resist heat and corrosion in marine paint and roof coatings, industrial coatings, inks, d...展開 Leafing Aluminum Paste BT-AP402 is a high pure aluminum powder that has a pigment content of 65±2% and a leafing value of ≥78%. This product is most commonly used to resist heat and corrosion in marine paint and roof coatings, industrial coatings, inks, decorative and reflective finishes coating, and anti-corrosive coatings. 收起 | |
| Leafing Aluminum Paste BT-AP403 | BioTio Group | Leafing Aluminum Paste BT-AP403 is a high pure aluminum powder that has a pigment content of 65±2% and a leafing value of ≥82%. This product is most commonly used to resist heat and corrosion in marine paint and roof coatings, industrial coatings, inks, d...展開 Leafing Aluminum Paste BT-AP403 is a high pure aluminum powder that has a pigment content of 65±2% and a leafing value of ≥82%. This product is most commonly used to resist heat and corrosion in marine paint and roof coatings, industrial coatings, inks, decorative and reflective finishes coating, and anti-corrosive coatings. 收起 | |
| Leafing Aluminum Paste BT-AP404 | BioTio Group | Leafing Aluminum Paste BT-AP404 is a high pure aluminum powder that has a pigment content of 73±2% and a leafing value of ≥78%. This product is most commonly used to resist heat and corrosion in marine paint and roof coatings, industrial coatings, inks, d...展開 Leafing Aluminum Paste BT-AP404 is a high pure aluminum powder that has a pigment content of 73±2% and a leafing value of ≥78%. This product is most commonly used to resist heat and corrosion in marine paint and roof coatings, industrial coatings, inks, decorative and reflective finishes coating, and anti-corrosive coatings. 收起 | |
| Lemon Chrome | Unilex Colours & Chemicals Ltd. | Lemon Chrome is a yellow chrome pigment. This product has high color strength and highly soluble properties. It has a specific gravity of 5 and a pH of 5-7, and is suitable for dispersions, printing inks, protective coatings, and liquid inks. | |
| LITHOPONE BT-IN600 | BioTio Group | LITHOPONE BT-IN600 is a white powder with a zinc sulfide content of ≥28% and a pH value of 7.2. This product is most commonly used in printing inks, marking paints, and coating applications. | |
| Middle Chrome | Unilex Colours & Chemicals Ltd. | Middle Chrome is a yellow chrome pigment. This product has high color strength and highly soluble properties, and it has a specific gravity of 5 and a pH of 5-7. It is often used in printing inks, liquid ink, and protective coatings. | |
| MTD100 | Guangxi Zhongchang Resin Co., Ltd. | MTD100 is a light yellow flaky solid and a terpene-phenolic resin obtained by catalytic polymerization of turpentine or α-pinene with phenol. This product is used to improve extension and flexibility of adhesive through greater heat-resistance, tackifying...展開 MTD100 is a light yellow flaky solid and a terpene-phenolic resin obtained by catalytic polymerization of turpentine or α-pinene with phenol. This product is used to improve extension and flexibility of adhesive through greater heat-resistance, tackifying and a softening point between 90-100ºC. It can also be applied to coating and printing ink. 收起 | |
| MTD100W | Guangxi Zhongchang Resin Co., Ltd. | MTD100W is a light yellow flaky solid and a terpene-phenolic resin obtained by catalytic polymerization of turpentine or α-pinene with phenol. This product is used to improve extension and flexibility of adhesive through greater heat-resistance, tackifyin...展開 MTD100W is a light yellow flaky solid and a terpene-phenolic resin obtained by catalytic polymerization of turpentine or α-pinene with phenol. This product is used to improve extension and flexibility of adhesive through greater heat-resistance, tackifying and a softening point between 90-100ºC. It can also be applied to coating and printing ink. 收起 | |
| MTD120 | Guangxi Zhongchang Resin Co., Ltd. | MTD120 is a light yellow flaky solid and a terpene-phenolic resin obtained by catalytic polymerization of turpentine or α-pinene with phenol. This product is used to improve extension and flexibility of adhesive through greater heat-resistance, tackifying...展開 MTD120 is a light yellow flaky solid and a terpene-phenolic resin obtained by catalytic polymerization of turpentine or α-pinene with phenol. This product is used to improve extension and flexibility of adhesive through greater heat-resistance, tackifying and a softening point between 120-130ºC. It can also be applied to coating and printing ink. 收起 | |
| MTD120W | Guangxi Zhongchang Resin Co., Ltd. | MTD120W is a light yellow flaky solid and a terpene-phenolic resin obtained by catalytic polymerization of turpentine or α-pinene with phenol. This product is used to improve extension and flexibility of adhesive through greater heat-resistance, tackifyin...展開 MTD120W is a light yellow flaky solid and a terpene-phenolic resin obtained by catalytic polymerization of turpentine or α-pinene with phenol. This product is used to improve extension and flexibility of adhesive through greater heat-resistance, tackifying and a softening point between 120-130ºC. It can also be applied to coating and printing ink. 收起 | |
| MTD150 | Guangxi Zhongchang Resin Co., Ltd. | MTD150 is a light yellow flaky solid and a terpene-phenolic resin obtained by catalytic polymerization of turpentine or α-pinene with phenol. This product is used to improve extension and flexibility of adhesive through greater heat-resistance, tackifying...展開 MTD150 is a light yellow flaky solid and a terpene-phenolic resin obtained by catalytic polymerization of turpentine or α-pinene with phenol. This product is used to improve extension and flexibility of adhesive through greater heat-resistance, tackifying and a softening point between 145-160ºC. It can also be applied to coating and printing ink. 收起 | |
| MTD150W | Guangxi Zhongchang Resin Co., Ltd. | MTD150W is a light yellow flaky solid and a terpene-phenolic resin obtained by catalytic polymerization of turpentine or α-pinene with phenol. This product is used to improve extension and flexibility of adhesive through greater heat-resistance, tackifyin...展開 MTD150W is a light yellow flaky solid and a terpene-phenolic resin obtained by catalytic polymerization of turpentine or α-pinene with phenol. This product is used to improve extension and flexibility of adhesive through greater heat-resistance, tackifying and a softening point between 145-160ºC. It can also be applied to coating and printing ink. 收起 | |
| Precipitated Barium Sulfate BT-IN601 | BioTio Group | Precipitated Barium Sulfate BT-IN601 is a white powder with a barium sulfate content of 98% and a maximum whiteness of 93. This product is most commonly used as a filler in printing ink, paint, surface coating, coated art paper, and dye applications. | |
| Prime Rose Chrome | Unilex Colours & Chemicals Ltd. | Prime Rose Chrome is a yellow chrome pigment. This product has high color strength and highly soluble properties, and it has a specific gravity of 5 and a pH of 5-7. It is often used in printing inks, liquid ink, and protective coatings. | |
| RA100 | Guangxi Zhongchang Resin Co., Ltd. | RA100 is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesiv...展開 RA100 is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink, paints and electronic flux. It contains a softening point of less than or equal to 100ºC and an acid number less than or equal to 190 mgKOH/g. 收起 | |
| RA100W | Guangxi Zhongchang Resin Co., Ltd. | RA100W is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesi...展開 RA100W is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink, paints and electronic flux. It contains a softening point of less than or equal to 100ºC and an acid number less than or equal to 190 mgKOH/g. 收起 | |
| RA120 | Guangxi Zhongchang Resin Co., Ltd. | RA120 is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesiv...展開 RA120 is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink, paints and electronic flux. It contains a softening point of less than or equal to 120ºC and an acid number less than or equal to 210 mgKOH/g. 收起 | |
| RA120W | Guangxi Zhongchang Resin Co., Ltd. | RA120W is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesi...展開 RA120W is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink, paints and electronic flux. It contains a softening point of less than or equal to 120ºC and an acid number less than or equal to 210 mgKOH/g. 收起 | |
| RA140 | Guangxi Zhongchang Resin Co., Ltd. | RA140 is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesiv...展開 RA140 is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink, paints and electronic flux. It contains a softening point of less than or equal to 140ºC and an acid number less than or equal to 145 mgKOH/g. 收起 | |
| RA140W | Guangxi Zhongchang Resin Co., Ltd. | RA140W is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesi...展開 RA140W is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink, paints and electronic flux. It contains a softening point of less than or equal to 140ºC and an acid number less than or equal to 145 mgKOH/g. 收起 | |
| RA90 | Guangxi Zhongchang Resin Co., Ltd. | RA90 is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesive...展開 RA90 is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink, paints and electronic flux. It contains a softening point of less than or equal to 90ºC and an acid number less than or equal to 180 mgKOH/g. 收起 | |
| RA90W | Guangxi Zhongchang Resin Co., Ltd. | RA90W is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesiv...展開 RA90W is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink, paints and electronic flux. It contains a softening point of less than or equal to 90ºC and an acid number less than or equal to 180 mgKOH/g. 收起 | |
| RGM128 | Guangxi Zhongchang Resin Co., Ltd. | RGM128 is a light yellow flaky solid and a maleic modified glycerine ester of gum rosin created to provide aliphatic compatibility in ink or oil paint formulations. The solubility of this solid makes it a good coresin for adjusting solubility paremeters i...展開 RGM128 is a light yellow flaky solid and a maleic modified glycerine ester of gum rosin created to provide aliphatic compatibility in ink or oil paint formulations. The solubility of this solid makes it a good coresin for adjusting solubility paremeters in lithographic inks and varnishes in addition to pigment wetting for use in economical flushing varnishes for heatset and sheetfed flushes. It contains a softening point between 125-131ºC. 收起 | |
| RGM128W | Guangxi Zhongchang Resin Co., Ltd. | RGM128W is a light yellow flaky solid and a maleic modified glycerine ester of gum rosin created to provide aliphatic compatibility in ink or oil paint formulations. The solubility of this solid makes it a good coresin for adjusting solubility paremeters ...展開 RGM128W is a light yellow flaky solid and a maleic modified glycerine ester of gum rosin created to provide aliphatic compatibility in ink or oil paint formulations. The solubility of this solid makes it a good coresin for adjusting solubility paremeters in lithographic inks and varnishes in addition to pigment wetting for use in economical flushing varnishes for heatset and sheetfed flushes. It contains a softening point between 125-131ºC. 收起 | |
| RGM135 | Guangxi Zhongchang Resin Co., Ltd. | RGM135 is a light yellow flaky solid and a maleic modified glycerine ester of gum rosin created to provide aliphatic compatibility in ink or oil paint formulations. The solubility of this solid makes it a good coresin for adjusting solubility paremeters i...展開 RGM135 is a light yellow flaky solid and a maleic modified glycerine ester of gum rosin created to provide aliphatic compatibility in ink or oil paint formulations. The solubility of this solid makes it a good coresin for adjusting solubility paremeters in lithographic inks and varnishes in addition to pigment wetting for use in economical flushing varnishes for heatset and sheetfed flushes. It contains a softening point between 131-138ºC. 收起 | |
| RGM135W | Guangxi Zhongchang Resin Co., Ltd. | RGM135W is a light yellow flaky solid and a maleic modified glycerine ester of gum rosin created to provide aliphatic compatibility in ink or oil paint formulations. The solubility of this solid makes it a good coresin for adjusting solubility paremeters ...展開 RGM135W is a light yellow flaky solid and a maleic modified glycerine ester of gum rosin created to provide aliphatic compatibility in ink or oil paint formulations. The solubility of this solid makes it a good coresin for adjusting solubility paremeters in lithographic inks and varnishes in addition to pigment wetting for use in economical flushing varnishes for heatset and sheetfed flushes. It contains a softening point between 131-138ºC. 收起 | |
| Rosin Modified Phenolic Resin - 2112 | Guangxi Zhongchang Resin Co., Ltd. | Rosin Modified Phenolic Resin - 2112 is a product of esterification derived from glycerol (or pentaerythrite) with the polycondensate of rosin. This product has a softening point less than or equal to 135ºC and an acid number less than or equal to 20. It ...展開 Rosin Modified Phenolic Resin - 2112 is a product of esterification derived from glycerol (or pentaerythrite) with the polycondensate of rosin. This product has a softening point less than or equal to 135ºC and an acid number less than or equal to 20. It is soluble in hydrocarbon, aroma, ester, ketone, benzine, benzene, ethyl benzine, spirit and turpentine for use in paint, printing ink and adhesives. 收起 | |
| Rosin Modified Phenolic Resin - 2116 | Guangxi Zhongchang Resin Co., Ltd. | Rosin Modified Phenolic Resin - 2116 is a product of esterification derived from glycerol (or pentaerythrite) with the polycondensate of rosin. This product has a softening point less than 151ºC and an acid number less than or equal to 18. It is soluble i...展開 Rosin Modified Phenolic Resin - 2116 is a product of esterification derived from glycerol (or pentaerythrite) with the polycondensate of rosin. This product has a softening point less than 151ºC and an acid number less than or equal to 18. It is soluble in hydrocarbon, aroma, ester, ketone, benzine, benzene, ethyl benzine, spirit and turpentine for use in paint, printing ink and adhesives. 收起 | |
| Rosin Modified Phenolic Resin - 2118 | Guangxi Zhongchang Resin Co., Ltd. | Rosin Modified Phenolic Resin - 2118 is a product of esterification derived from glycerol (or pentaerythrite) with the polycondensate of rosin. This product has a softening point less than 157ºC and an acid number less than or equal to 20. It is soluble i...展開 Rosin Modified Phenolic Resin - 2118 is a product of esterification derived from glycerol (or pentaerythrite) with the polycondensate of rosin. This product has a softening point less than 157ºC and an acid number less than or equal to 20. It is soluble in hydrocarbon, aroma, ester, ketone, benzine, benzene, ethyl benzine, spirit and turpentine for use in paint, printing ink and adhesives. 收起 | |
| RPF100 | Guangxi Zhongchang Resin Co., Ltd. | RPF100 is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 97-103ºC, a gardner color of less than four and an acid number less than or equal to 20 mgKOH/g. It provides dissolvability in low ...展開 RPF100 is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 97-103ºC, a gardner color of less than four and an acid number less than or equal to 20 mgKOH/g. It provides dissolvability in low carbon alcohol, light color aging resistance and light resistance that is widely used in alcohol soluble and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink and electronic flux. 收起 | |
| RPF100A | Guangxi Zhongchang Resin Co., Ltd. | RPF100A is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 97-103ºC, a gardner color of less than four and an acid number less than or equal to 30 mgKOH/g. It provides dissolvability in low...展開 RPF100A is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 97-103ºC, a gardner color of less than four and an acid number less than or equal to 30 mgKOH/g. It provides dissolvability in low carbon alcohol, light color aging resistance and light resistance that is widely used in alcohol soluble and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink and electronic flux. 收起 | |
| RPF100B | Guangxi Zhongchang Resin Co., Ltd. | RPF100B is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 97-103ºC, a gardner color of less than five and an acid number less than or equal to 40 mgKOH/g. It provides dissolvability in low...展開 RPF100B is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 97-103ºC, a gardner color of less than five and an acid number less than or equal to 40 mgKOH/g. It provides dissolvability in low carbon alcohol, light color aging resistance and light resistance that is widely used in alcohol soluble and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink and electronic flux. 收起 | |
| RPF100W | Guangxi Zhongchang Resin Co., Ltd. | RPF100W is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 97-103ºC, a gardner color of less than one and an acid number less than or equal to 25 mgKOH/g. It provides dissolvability in low ...展開 RPF100W is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 97-103ºC, a gardner color of less than one and an acid number less than or equal to 25 mgKOH/g. It provides dissolvability in low carbon alcohol, light color aging resistance and light resistance that is widely used in alcohol soluble and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink and electronic flux. 收起 | |
| RPF90 | Guangxi Zhongchang Resin Co., Ltd. | RPF90 is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 87-93ºC, a gardner color of less than four and an acid number less than or equal to 20 mgKOH/g. It provides dissolvability in low ca...展開 RPF90 is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 87-93ºC, a gardner color of less than four and an acid number less than or equal to 20 mgKOH/g. It provides dissolvability in low carbon alcohol, light color aging resistance and light resistance that is widely used in alcohol soluble and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink and electronic flux. 收起 | |
| RPF90W | Guangxi Zhongchang Resin Co., Ltd. | RPF90W is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 87-93ºC, a gardner color of less than one and an acid number less than or equal to 25 mgKOH/g. It provides dissolvability in low ca...展開 RPF90W is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 87-93ºC, a gardner color of less than one and an acid number less than or equal to 25 mgKOH/g. It provides dissolvability in low carbon alcohol, light color aging resistance and light resistance that is widely used in alcohol soluble and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink and electronic flux. 收起 | |
| Scarlet Chrome | Unilex Colours & Chemicals Ltd. | Scarlet Chrome is a red chrome pigment. This product has high color strength and highly soluble properties, and it has a specific gravity of 6 and a pH of 5-7. It is often used in printing inks, liquid ink, and protective coatings. | |
| Sodium Alginate BT-IN607 | BioTio Group | Sodium Alginate BT-IN607 is a 40-mesh sized, light yellow powder that has a pH value of 6.0-7.0. This product is most commonly used as a thickener in reactive dyestuff, textile screen-printing, and carpet jet-printing applications. | |
| Synthetic Black Oxide | Unilex Colours & Chemicals Ltd. | Synthetic Black Oxide is a black inorganic pigment. This product has a specific gravity of 3.5-5.5 and a pH of 5-8. It is non-toxic and durable, and is suitable for inks, paints, and coatings. | |
| Synthetic Orange Oxide | Unilex Colours & Chemicals Ltd. | Synthetic Orange Oxide is an orange inorganic pigment. This product has a specific gravity of 3.5-5.5 and a pH of 3-7. It is non-toxic and durable, and is suitable for paints, coatings, and inks. | |
| Synthetic Red Oxide | Unilex Colours & Chemicals Ltd. | Synthetic Red Oxide is a red inorganic pigment. This product has a specific gravity of 4 and a pH of 5-7. It is non-toxic and durable, and is suitable for paints, coatings, and inks. | |
| Synthetic Yellow Oxide | Unilex Colours & Chemicals Ltd. | Synthetic Yellow Oxide is a yellow inorganic pigment. This product has a specific gravity of 4 and a pH of 4-7. It is non-toxic and durable, and is suitable for paints, coatings, and inks. | |
| Titanium Dioxide Anatase BT-A11 | BioTio Group | Titanium Dioxide Anatase BT-A11 is a white powder that has a titanium dioxide content of ≤93% and a pH value of 6.5-8.0. This product is most commonly used in exterior, water-based, and powder coating, emulsion paints, and printing ink applications. | |
| Titanium Dioxide Anatase BT-A113 | BioTio Group | Titanium Dioxide Anatase BT-A113 is a white powder that has a titanium dioxide content of ≥95% and a pH value of 6.5-8.0. This product is most commonly used in exterior, water-based, and powder coating, emulsion paints, and printing ink applications. | |
| Titanium Dioxide Anatase BT-A114 | BioTio Group | Titanium Dioxide Anatase BT-A114 is a white powder that has a titanium dioxide content of ≥98% and a pH value of 6.5-8.0. This product is most commonly used in exterior, water-based, and powder coating, emulsion paints, and printing ink applications. | |
| Titanium Dioxide Rutile BT-R22 | BioTio Group | Titanium Dioxide Rutile BT-R22 is a white powder that has a titanium dioxide content of ≤90% and a pH value of 6.5-8.0. This product is most commonly used in exterior, water-based, and powder coating, road marking and emulsion paint, and printing ink appl...展開 Titanium Dioxide Rutile BT-R22 is a white powder that has a titanium dioxide content of ≤90% and a pH value of 6.5-8.0. This product is most commonly used in exterior, water-based, and powder coating, road marking and emulsion paint, and printing ink applications. 收起 | |
| Titanium Dioxide Rutile BT-R225 | BioTio Group | Titanium Dioxide Rutile BT-R225 is a white powder that has a titanium dioxide content of ≥93% and a pH value of 6.5-8.0. This product is most commonly used in exterior, water-based, and powder coating, road marking and emulsion paint, and printing ink app...展開 Titanium Dioxide Rutile BT-R225 is a white powder that has a titanium dioxide content of ≥93% and a pH value of 6.5-8.0. This product is most commonly used in exterior, water-based, and powder coating, road marking and emulsion paint, and printing ink applications. 收起 | |
| Titanium Dioxide Rutile BT-R226 | BioTio Group | Titanium Dioxide Rutile BT-R226 is a white powder that has a titanium dioxide content of ≥95% and a pH value of 6.0-8.5. This product is most commonly used in exterior, water-based, and powder coating, road marking and emulsion paint, and printing ink app...展開 Titanium Dioxide Rutile BT-R226 is a white powder that has a titanium dioxide content of ≥95% and a pH value of 6.0-8.5. This product is most commonly used in exterior, water-based, and powder coating, road marking and emulsion paint, and printing ink applications. 收起 | |
| Trucolor 206 Beige | Zschimmer & Schwarz GmbH & Co. KG Chemische Fabriken | Trucolor 206 Beige is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with beige ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are s...展開 Trucolor 206 Beige is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with beige ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are stored at least 1 day at production temperature before usage. 收起 | |
| Trucolor 206 Beige S | Zschimmer & Schwarz GmbH & Co. KG Chemische Fabriken | Trucolor 206 Beige S is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with beige ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are st...展開 Trucolor 206 Beige S is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with beige ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are stored at least 1 day at production temperature before usage. 收起 | |
| Trucolor 207 Blue HT | Zschimmer & Schwarz GmbH & Co. KG Chemische Fabriken | Trucolor 207 Blue HT is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with blue ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are sto...展開 Trucolor 207 Blue HT is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with blue ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are stored at least 1 day at production temperature before usage. 收起 | |
| Trucolor 209 Pink | Zschimmer & Schwarz GmbH & Co. KG Chemische Fabriken | Trucolor 209 Pink is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with pink ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are stored...展開 Trucolor 209 Pink is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with pink ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are stored at least 1 day at production temperature before usage. 收起 | |
| Trucolor 209 Pink S | Zschimmer & Schwarz GmbH & Co. KG Chemische Fabriken | Trucolor 209 Pink S is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with pink ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are stor...展開 Trucolor 209 Pink S is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with pink ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are stored at least 1 day at production temperature before usage. 收起 | |
| Trucolor 210 Redbrown | Zschimmer & Schwarz GmbH & Co. KG Chemische Fabriken | Trucolor 210 Redbrown is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with reddish-brown ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the in...展開 Trucolor 210 Redbrown is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with reddish-brown ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are stored at least 1 day at production temperature before usage. 收起 | |
| Trucolor 210 Redbrown S | Zschimmer & Schwarz GmbH & Co. KG Chemische Fabriken | Trucolor 210 Redbrown S is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with reddish-brown ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the ...展開 Trucolor 210 Redbrown S is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with reddish-brown ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are stored at least 1 day at production temperature before usage. 收起 | |
| Trucolor 211 Yellow | Zschimmer & Schwarz GmbH & Co. KG Chemische Fabriken | Trucolor 211 Yellow is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with yellow ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are st...展開 Trucolor 211 Yellow is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with yellow ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are stored at least 1 day at production temperature before usage. 收起 | |
| Trucolor 211 Yellow S | Zschimmer & Schwarz GmbH & Co. KG Chemische Fabriken | Trucolor 211 Yellow S is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with yellow ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are ...展開 Trucolor 211 Yellow S is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with yellow ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are stored at least 1 day at production temperature before usage. 收起 | |
| Trucolor 217 Black | Zschimmer & Schwarz GmbH & Co. KG Chemische Fabriken | Trucolor 217 Black is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with black ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are stor...展開 Trucolor 217 Black is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with black ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are stored at least 1 day at production temperature before usage. 收起 | |
| Trucolor 217 Black S | Zschimmer & Schwarz GmbH & Co. KG Chemische Fabriken | Trucolor 217 Black S is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with black ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are st...展開 Trucolor 217 Black S is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with black ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are stored at least 1 day at production temperature before usage. 收起 | |
| Trucolor 219 Blue | Zschimmer & Schwarz GmbH & Co. KG Chemische Fabriken | Trucolor 219 Blue is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with blue ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are stored...展開 Trucolor 219 Blue is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with blue ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are stored at least 1 day at production temperature before usage. 收起 | |
| Trucolor 219 Blue S | Zschimmer & Schwarz GmbH & Co. KG Chemische Fabriken | Trucolor 219 Blue S is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with blue ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are stor...展開 Trucolor 219 Blue S is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with blue ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are stored at least 1 day at production temperature before usage. 收起 | |
| Trucolor 236 Orange | Zschimmer & Schwarz GmbH & Co. KG Chemische Fabriken | Trucolor 236 Orange is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with orange ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are st...展開 Trucolor 236 Orange is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with orange ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are stored at least 1 day at production temperature before usage. 收起 | |
| Trucolor 236 Orange S | Zschimmer & Schwarz GmbH & Co. KG Chemische Fabriken | Trucolor 236 Orange S is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with orange ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are ...展開 Trucolor 236 Orange S is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with orange ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are stored at least 1 day at production temperature before usage. 收起 | |
| Trucolor 242 White | Zschimmer & Schwarz GmbH & Co. KG Chemische Fabriken | Trucolor 242 White is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with white ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are stor...展開 Trucolor 242 White is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with white ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are stored at least 1 day at production temperature before usage. 收起 | |
| Trucolor 242 White S | Zschimmer & Schwarz GmbH & Co. KG Chemische Fabriken | Trucolor 242 White S is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with white ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are st...展開 Trucolor 242 White S is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with white ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are stored at least 1 day at production temperature before usage. 收起 | |
| Trucolor 281 Redorange | Zschimmer & Schwarz GmbH & Co. KG Chemische Fabriken | Trucolor 281 Redorange is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with reddish-orange ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the ...展開 Trucolor 281 Redorange is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with reddish-orange ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are stored at least 1 day at production temperature before usage. 收起 | |
| Trucolor 285 Green | Zschimmer & Schwarz GmbH & Co. KG Chemische Fabriken | Trucolor 285 Green is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with green ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are stor...展開 Trucolor 285 Green is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with green ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are stored at least 1 day at production temperature before usage. 收起 | |
| Trucolor EF 245 | Zschimmer & Schwarz GmbH & Co. KG Chemische Fabriken | Trucolor EF 245 is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with transparent effects in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the ink...展開 Trucolor EF 245 is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with transparent effects in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are stored at least 1 day at production temperature before usage. 收起 | |
| Trucolor EF 245 S | Zschimmer & Schwarz GmbH & Co. KG Chemische Fabriken | Trucolor EF 245 S is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with transparent effects in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks...展開 Trucolor EF 245 S is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with transparent effects in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are stored at least 1 day at production temperature before usage. 收起 | |
| Unifast Blue 15:0 | Unilex Colours & Chemicals Ltd. | Unifast Blue 15:0 is a blue phthalocyanine pigment. This product has a specific gravity of 1.5 and a pH of 7. It is often used in the preparation of inks, paints, plastics, and others. | |
| Unifast Blue 15:3 | Unilex Colours & Chemicals Ltd. | Unifast Blue 15:3 is a blue phthalocyanine pigment. This product has a specific gravity of 1.6 and a pH of 7. It is often used in the preparation of inks, paints, plastics, and others. | |
| Unifast Blue 15:4 | Unilex Colours & Chemicals Ltd. | Unifast Blue 15:4 is a blue phthalocyanine pigment. This product has a specific gravity of 1.7 and a pH of 7. It is used in the preparation of paints, plastics, and solvent based inks. | |
| Unifast Green 7 | Unilex Colours & Chemicals Ltd. | Unifast Green 7 is a green phthalocyanine pigment. This product has a specific gravity of 1.6 and a pH of 7. It is used in the preparation of paints, plastics, and solvent based inks. | |
| Unifast Orange 13 | Unilex Colours & Chemicals Ltd. | Unifast Orange 13 is an orange organic pigment that is non-toxic and has good purity, durability, and strength. This product has a specific gravity of 1.5 and a pH of 7. It is suitable for dispersions, inks, and paints. | |
| Unifast Orange 34 | Unilex Colours & Chemicals Ltd. | Unifast Orange 34 is an orange organic pigment that is non-toxic and has good purity, durability, and strength. This product has a specific gravity of 1.4 and a pH of 6.5. It is suitable for dispersions, inks, and paints. | |
| Unifast Orange 5 | Unilex Colours & Chemicals Ltd. | Unifast Orange 5 is an orange organic pigment that is non-toxic and has good purity, durability, and strength. This product has a specific gravity of 1.4 and a pH of 6. It is suitable for dispersions, inks, and paints. | |
| Unifast Red 112 | Unilex Colours & Chemicals Ltd. | Unifast Red 112 is a red organic pigment that is non-toxic and has good purity, durability, and strength. This product has a specific gravity of 1.2 and a pH of 7. It is suitable for dispersions, inks, and paints. | |
| Unifast Red 12 | Unilex Colours & Chemicals Ltd. | Unifast Red 12 is a red organic pigment that is non-toxic and has good purity, durability, and strength. This product has a specific gravity of 1.5 and a pH of 7. It is suitable for dispersions, inks, and paints. | |
| Unifast Red 146 | Unilex Colours & Chemicals Ltd. | Unifast Red 146 is a red organic pigment that is non-toxic and has good purity, durability, and strength. This product has a specific gravity of 1.5 and a pH of 7. It is suitable for dispersions, inks, and paints. | |
| Unifast Red 170 | Unilex Colours & Chemicals Ltd. | Unifast Red 170 is a red organic pigment that is non-toxic and has good purity, durability, and strength. This product has a specific gravity of 1.5 and a pH of 7. It is suitable for dispersions, inks, and paints. |
