| BT-B101 BRONOPOL | BioTio Group | BT-B101 BRONOPOL is a white crystalline powder that has a melting point of 126-131°C and a pH value of 5.0-7.0. This product is most commonly used as a broad-spectrum antimicrobial agent in coatings, paints, inks, and adhesive applications. | |
| BT-IN603 DTSA | BioTio Group | BT-IN603 DTSA is an off-white to light yellow powder that has a melting point of 280-290°C and a moisture content of ≤0.10%. This product is most commonly used as a chemical intermediate in dyes and biocides. | |
| BT-IN604 DCPI | BioTio Group | BT-IN604 DCPI is a white crystalline powder that has a content/assay of ≥98% and other isocyanate content of ≤1.0%. This product is most commonly used as an intermediate for the production of dyes. | |
| Decoflux DP 210 Redbrown | Zschimmer & Schwarz GmbH & Co. KG Chemische Fabriken | Decoflux DP 210 Redbrown is a grinding vehicle. This product is insoluble in water and can be used in the production of reddish brown inks in digital printing applications. The end user will have to determine and adapt the required ratio of solids conte...展開 Decoflux DP 210 Redbrown is a grinding vehicle. This product is insoluble in water and can be used in the production of reddish brown inks in digital printing applications. The end user will have to determine and adapt the required ratio of solids content and media. 收起 | |
| Decoflux DP 211 Yellow | Zschimmer & Schwarz GmbH & Co. KG Chemische Fabriken | Decoflux DP 211 Yellow is a grinding vehicle. This product is insoluble in water and can be used in the production of yellowish-brown inks in digital printing applications. The end user will have to determine and adapt the required ratio of solids content...展開 Decoflux DP 211 Yellow is a grinding vehicle. This product is insoluble in water and can be used in the production of yellowish-brown inks in digital printing applications. The end user will have to determine and adapt the required ratio of solids content and media. 收起 | |
| Decoflux DP R 12 | Zschimmer & Schwarz GmbH & Co. KG Chemische Fabriken | Decoflux DP R 12 is an auxiliary for adjusting the rheology and printing properties of ink media. This product is solvent-based and insoluble in water. It can be used to protect against drying inks out, even at high temperatures, and will decrease visco...展開 Decoflux DP R 12 is an auxiliary for adjusting the rheology and printing properties of ink media. This product is solvent-based and insoluble in water. It can be used to protect against drying inks out, even at high temperatures, and will decrease viscosity variations in the end product. 收起 | |
| Decoflux DP R 24 | Zschimmer & Schwarz GmbH & Co. KG Chemische Fabriken | Decoflux DP R 24 is an auxiliary for adjusting the rheology and printing properties of ink media. This product is solvent-based and insoluble in water. It can be used to protect against drying inks out, even at high temperatures, and will decrease viscosi...展開 Decoflux DP R 24 is an auxiliary for adjusting the rheology and printing properties of ink media. This product is solvent-based and insoluble in water. It can be used to protect against drying inks out, even at high temperatures, and will decrease viscosity variations in the end product. 收起 | |
| Digicer Primer 008 | Zschimmer & Schwarz GmbH & Co. KG Chemische Fabriken | Digicer Primer 008, in the form of a transparent liquid, is a mix of derivatives from ethylene and propylene oxides. This product can be used as a film-former on the surface of a glaze, in order to create an uniform suction behavior of the applied printi...展開 Digicer Primer 008, in the form of a transparent liquid, is a mix of derivatives from ethylene and propylene oxides. This product can be used as a film-former on the surface of a glaze, in order to create an uniform suction behavior of the applied printing ink by the glaze, which creates good preconditions for the decoration by digital printing technology. It decreases the vapour pressure of the water, which avoids condensation on the printing heads. It also improves the application of colour and reduces defects from inexact adjustment of the printing heads. 收起 | |
| Digicer TU 203 | Zschimmer & Schwarz GmbH & Co. KG Chemische Fabriken | Digicer TU 203, in the form of a yellow liquid, is a mix of block polymers. This product is a levelling agent for glazes to be applied after decoration by digital printing technology. The hydrophobic character of inks often do not permit perfect levelin...展開 Digicer TU 203, in the form of a yellow liquid, is a mix of block polymers. This product is a levelling agent for glazes to be applied after decoration by digital printing technology. The hydrophobic character of inks often do not permit perfect leveling of the glaze on the tile surface after the decoration by digital printing technology. This product in particular avoids repelling water. 收起 | |
| Granicer 7030 | Zschimmer & Schwarz GmbH & Co. KG Chemische Fabriken | Granicer 7030, in the form of a turbid, viscous liquid, is a preparation of polymers in an aqueous solution. This product allows the application of granules to tiles by airless, double disk, bell, or curtain coating machines, and to cover the complete sur...展開 Granicer 7030, in the form of a turbid, viscous liquid, is a preparation of polymers in an aqueous solution. This product allows the application of granules to tiles by airless, double disk, bell, or curtain coating machines, and to cover the complete surface of the tiles. It can be used in the fields of engraving and digital printing. This product is miscible in water. 收起 | |
| KF-10 | Macro Polymers Pvt. Ltd. | KF-10 is a ketone formaldehyde resin. This product has compatibility with drying and non-drying short oil alkyds that have been dissolved in aromatic solvents. It shows high gloss and excellent build in air-drying nitrocellulose industrial finishes. If...展開 KF-10 is a ketone formaldehyde resin. This product has compatibility with drying and non-drying short oil alkyds that have been dissolved in aromatic solvents. It shows high gloss and excellent build in air-drying nitrocellulose industrial finishes. If it is used with non-reactive polyamides, it gives good gloss in flexo inks. KF-10 can be used in nitrocellulose paints, adhesives, printing inks, ballpoint pen ink pastes, wood varnishes, metal and paper. 收起 | |
| Leafing Aluminum Paste BT-AP400 | BioTio Group | Leafing Aluminum Paste BT-AP400 is a high pure aluminum powder that has a pigment content of 65±2% and a leafing value of ≥65%. This product is most commonly used to resist heat and corrosion in marine paint and roof coatings, industrial coatings, inks, d...展開 Leafing Aluminum Paste BT-AP400 is a high pure aluminum powder that has a pigment content of 65±2% and a leafing value of ≥65%. This product is most commonly used to resist heat and corrosion in marine paint and roof coatings, industrial coatings, inks, decorative and reflective finishes coating, and anti-corrosive coatings. 收起 | |
| Leafing Aluminum Paste BT-AP401 | BioTio Group | Leafing Aluminum Paste BT-AP401 is a high pure aluminum powder that has a pigment content of 65±2% and a leafing value of ≥75%. This product is most commonly used to resist heat and corrosion in marine paint and roof coatings, industrial coatings, inks, d...展開 Leafing Aluminum Paste BT-AP401 is a high pure aluminum powder that has a pigment content of 65±2% and a leafing value of ≥75%. This product is most commonly used to resist heat and corrosion in marine paint and roof coatings, industrial coatings, inks, decorative and reflective finishes coating, and anti-corrosive coatings. 收起 | |
| Leafing Aluminum Paste BT-AP402 | BioTio Group | Leafing Aluminum Paste BT-AP402 is a high pure aluminum powder that has a pigment content of 65±2% and a leafing value of ≥78%. This product is most commonly used to resist heat and corrosion in marine paint and roof coatings, industrial coatings, inks, d...展開 Leafing Aluminum Paste BT-AP402 is a high pure aluminum powder that has a pigment content of 65±2% and a leafing value of ≥78%. This product is most commonly used to resist heat and corrosion in marine paint and roof coatings, industrial coatings, inks, decorative and reflective finishes coating, and anti-corrosive coatings. 收起 | |
| Leafing Aluminum Paste BT-AP403 | BioTio Group | Leafing Aluminum Paste BT-AP403 is a high pure aluminum powder that has a pigment content of 65±2% and a leafing value of ≥82%. This product is most commonly used to resist heat and corrosion in marine paint and roof coatings, industrial coatings, inks, d...展開 Leafing Aluminum Paste BT-AP403 is a high pure aluminum powder that has a pigment content of 65±2% and a leafing value of ≥82%. This product is most commonly used to resist heat and corrosion in marine paint and roof coatings, industrial coatings, inks, decorative and reflective finishes coating, and anti-corrosive coatings. 收起 | |
| Leafing Aluminum Paste BT-AP404 | BioTio Group | Leafing Aluminum Paste BT-AP404 is a high pure aluminum powder that has a pigment content of 73±2% and a leafing value of ≥78%. This product is most commonly used to resist heat and corrosion in marine paint and roof coatings, industrial coatings, inks, d...展開 Leafing Aluminum Paste BT-AP404 is a high pure aluminum powder that has a pigment content of 73±2% and a leafing value of ≥78%. This product is most commonly used to resist heat and corrosion in marine paint and roof coatings, industrial coatings, inks, decorative and reflective finishes coating, and anti-corrosive coatings. 收起 | |
| LITHOPONE BT-IN600 | BioTio Group | LITHOPONE BT-IN600 is a white powder with a zinc sulfide content of ≥28% and a pH value of 7.2. This product is most commonly used in printing inks, marking paints, and coating applications. | |
| Precipitated Barium Sulfate BT-IN601 | BioTio Group | Precipitated Barium Sulfate BT-IN601 is a white powder with a barium sulfate content of 98% and a maximum whiteness of 93. This product is most commonly used as a filler in printing ink, paint, surface coating, coated art paper, and dye applications. | |
| S-5060 | Macro Polymers Pvt. Ltd. | S-5060 is a specialty alkyd resin derived from long oil, pentaerythritol-isophthalic acid that has been esterified and modified with soybean oil. This product has good yellowing and heat resistance, and good durability. It can be used in printing inks a...展開 S-5060 is a specialty alkyd resin derived from long oil, pentaerythritol-isophthalic acid that has been esterified and modified with soybean oil. This product has good yellowing and heat resistance, and good durability. It can be used in printing inks and insulating varnishes. 收起 | |
| Sodium Alginate BT-IN607 | BioTio Group | Sodium Alginate BT-IN607 is a 40-mesh sized, light yellow powder that has a pH value of 6.0-7.0. This product is most commonly used as a thickener in reactive dyestuff, textile screen-printing, and carpet jet-printing applications. | |
| Titanium Dioxide Anatase BT-A11 | BioTio Group | Titanium Dioxide Anatase BT-A11 is a white powder that has a titanium dioxide content of ≤93% and a pH value of 6.5-8.0. This product is most commonly used in exterior, water-based, and powder coating, emulsion paints, and printing ink applications. | |
| Titanium Dioxide Anatase BT-A113 | BioTio Group | Titanium Dioxide Anatase BT-A113 is a white powder that has a titanium dioxide content of ≥95% and a pH value of 6.5-8.0. This product is most commonly used in exterior, water-based, and powder coating, emulsion paints, and printing ink applications. | |
| Titanium Dioxide Anatase BT-A114 | BioTio Group | Titanium Dioxide Anatase BT-A114 is a white powder that has a titanium dioxide content of ≥98% and a pH value of 6.5-8.0. This product is most commonly used in exterior, water-based, and powder coating, emulsion paints, and printing ink applications. | |
| Titanium Dioxide Rutile BT-R22 | BioTio Group | Titanium Dioxide Rutile BT-R22 is a white powder that has a titanium dioxide content of ≤90% and a pH value of 6.5-8.0. This product is most commonly used in exterior, water-based, and powder coating, road marking and emulsion paint, and printing ink appl...展開 Titanium Dioxide Rutile BT-R22 is a white powder that has a titanium dioxide content of ≤90% and a pH value of 6.5-8.0. This product is most commonly used in exterior, water-based, and powder coating, road marking and emulsion paint, and printing ink applications. 收起 | |
| Titanium Dioxide Rutile BT-R225 | BioTio Group | Titanium Dioxide Rutile BT-R225 is a white powder that has a titanium dioxide content of ≥93% and a pH value of 6.5-8.0. This product is most commonly used in exterior, water-based, and powder coating, road marking and emulsion paint, and printing ink app...展開 Titanium Dioxide Rutile BT-R225 is a white powder that has a titanium dioxide content of ≥93% and a pH value of 6.5-8.0. This product is most commonly used in exterior, water-based, and powder coating, road marking and emulsion paint, and printing ink applications. 收起 | |
| Titanium Dioxide Rutile BT-R226 | BioTio Group | Titanium Dioxide Rutile BT-R226 is a white powder that has a titanium dioxide content of ≥95% and a pH value of 6.0-8.5. This product is most commonly used in exterior, water-based, and powder coating, road marking and emulsion paint, and printing ink app...展開 Titanium Dioxide Rutile BT-R226 is a white powder that has a titanium dioxide content of ≥95% and a pH value of 6.0-8.5. This product is most commonly used in exterior, water-based, and powder coating, road marking and emulsion paint, and printing ink applications. 收起 | |
| Trucolor 206 Beige | Zschimmer & Schwarz GmbH & Co. KG Chemische Fabriken | Trucolor 206 Beige is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with beige ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are s...展開 Trucolor 206 Beige is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with beige ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are stored at least 1 day at production temperature before usage. 收起 | |
| Trucolor 206 Beige S | Zschimmer & Schwarz GmbH & Co. KG Chemische Fabriken | Trucolor 206 Beige S is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with beige ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are st...展開 Trucolor 206 Beige S is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with beige ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are stored at least 1 day at production temperature before usage. 收起 | |
| Trucolor 207 Blue HT | Zschimmer & Schwarz GmbH & Co. KG Chemische Fabriken | Trucolor 207 Blue HT is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with blue ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are sto...展開 Trucolor 207 Blue HT is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with blue ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are stored at least 1 day at production temperature before usage. 收起 | |
| Trucolor 209 Pink | Zschimmer & Schwarz GmbH & Co. KG Chemische Fabriken | Trucolor 209 Pink is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with pink ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are stored...展開 Trucolor 209 Pink is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with pink ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are stored at least 1 day at production temperature before usage. 收起 | |
| Trucolor 209 Pink S | Zschimmer & Schwarz GmbH & Co. KG Chemische Fabriken | Trucolor 209 Pink S is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with pink ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are stor...展開 Trucolor 209 Pink S is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with pink ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are stored at least 1 day at production temperature before usage. 收起 | |
| Trucolor 210 Redbrown | Zschimmer & Schwarz GmbH & Co. KG Chemische Fabriken | Trucolor 210 Redbrown is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with reddish-brown ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the in...展開 Trucolor 210 Redbrown is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with reddish-brown ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are stored at least 1 day at production temperature before usage. 收起 | |
| Trucolor 210 Redbrown S | Zschimmer & Schwarz GmbH & Co. KG Chemische Fabriken | Trucolor 210 Redbrown S is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with reddish-brown ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the ...展開 Trucolor 210 Redbrown S is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with reddish-brown ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are stored at least 1 day at production temperature before usage. 收起 | |
| Trucolor 211 Yellow | Zschimmer & Schwarz GmbH & Co. KG Chemische Fabriken | Trucolor 211 Yellow is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with yellow ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are st...展開 Trucolor 211 Yellow is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with yellow ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are stored at least 1 day at production temperature before usage. 收起 | |
| Trucolor 211 Yellow S | Zschimmer & Schwarz GmbH & Co. KG Chemische Fabriken | Trucolor 211 Yellow S is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with yellow ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are ...展開 Trucolor 211 Yellow S is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with yellow ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are stored at least 1 day at production temperature before usage. 收起 | |
| Trucolor 217 Black | Zschimmer & Schwarz GmbH & Co. KG Chemische Fabriken | Trucolor 217 Black is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with black ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are stor...展開 Trucolor 217 Black is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with black ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are stored at least 1 day at production temperature before usage. 收起 | |
| Trucolor 217 Black S | Zschimmer & Schwarz GmbH & Co. KG Chemische Fabriken | Trucolor 217 Black S is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with black ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are st...展開 Trucolor 217 Black S is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with black ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are stored at least 1 day at production temperature before usage. 收起 | |
| Trucolor 219 Blue | Zschimmer & Schwarz GmbH & Co. KG Chemische Fabriken | Trucolor 219 Blue is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with blue ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are stored...展開 Trucolor 219 Blue is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with blue ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are stored at least 1 day at production temperature before usage. 收起 | |
| Trucolor 219 Blue S | Zschimmer & Schwarz GmbH & Co. KG Chemische Fabriken | Trucolor 219 Blue S is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with blue ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are stor...展開 Trucolor 219 Blue S is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with blue ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are stored at least 1 day at production temperature before usage. 收起 | |
| Trucolor 236 Orange | Zschimmer & Schwarz GmbH & Co. KG Chemische Fabriken | Trucolor 236 Orange is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with orange ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are st...展開 Trucolor 236 Orange is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with orange ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are stored at least 1 day at production temperature before usage. 收起 | |
| Trucolor 236 Orange S | Zschimmer & Schwarz GmbH & Co. KG Chemische Fabriken | Trucolor 236 Orange S is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with orange ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are ...展開 Trucolor 236 Orange S is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with orange ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are stored at least 1 day at production temperature before usage. 收起 | |
| Trucolor 242 White | Zschimmer & Schwarz GmbH & Co. KG Chemische Fabriken | Trucolor 242 White is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with white ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are stor...展開 Trucolor 242 White is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with white ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are stored at least 1 day at production temperature before usage. 收起 | |
| Trucolor 242 White S | Zschimmer & Schwarz GmbH & Co. KG Chemische Fabriken | Trucolor 242 White S is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with white ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are st...展開 Trucolor 242 White S is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with white ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are stored at least 1 day at production temperature before usage. 收起 | |
| Trucolor 281 Redorange | Zschimmer & Schwarz GmbH & Co. KG Chemische Fabriken | Trucolor 281 Redorange is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with reddish-orange ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the ...展開 Trucolor 281 Redorange is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with reddish-orange ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are stored at least 1 day at production temperature before usage. 收起 | |
| Trucolor 285 Green | Zschimmer & Schwarz GmbH & Co. KG Chemische Fabriken | Trucolor 285 Green is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with green ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are stor...展開 Trucolor 285 Green is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with green ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are stored at least 1 day at production temperature before usage. 收起 | |
| Trucolor EF 245 | Zschimmer & Schwarz GmbH & Co. KG Chemische Fabriken | Trucolor EF 245 is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with transparent effects in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the ink...展開 Trucolor EF 245 is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with transparent effects in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are stored at least 1 day at production temperature before usage. 收起 | |
| Trucolor EF 245 S | Zschimmer & Schwarz GmbH & Co. KG Chemische Fabriken | Trucolor EF 245 S is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with transparent effects in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks...展開 Trucolor EF 245 S is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with transparent effects in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are stored at least 1 day at production temperature before usage. 收起 | |
| Unithane IC-100 | Union Specialties, Inc. | Unithane IC-100 is a NMP containing, medium hard, high gloss, APEO free, water-based polyurethane dispersion. This product has a gloss at 60° of 85 and a viscosity at 25°C of 100 cps. It is often used in a formulated topcoat for wood, metal, flooring, ink...展開 Unithane IC-100 is a NMP containing, medium hard, high gloss, APEO free, water-based polyurethane dispersion. This product has a gloss at 60° of 85 and a viscosity at 25°C of 100 cps. It is often used in a formulated topcoat for wood, metal, flooring, inks, adhesives, and graphic arts. 收起 | |
| Unithane IC-105 | Union Specialties, Inc. | Unithane IC-105 is an anionic APEO free dispersion of an aliphatic polyester-based urethane in water using a co-solvent of N-Methyl-2-Pyrrolidinone. This product has a gloss at 60° of 85 and a viscosity at 25°C of 100cps. It is designed for industrial coa...展開 Unithane IC-105 is an anionic APEO free dispersion of an aliphatic polyester-based urethane in water using a co-solvent of N-Methyl-2-Pyrrolidinone. This product has a gloss at 60° of 85 and a viscosity at 25°C of 100cps. It is designed for industrial coating applications that require good gloss, chemical resistance and adhesion to a variety of substrates. It can also be used in flooring coatings, paints, graphic arts and inks, and wood coatings. 收起 | |
| Unithane IC-151 NF | Union Specialties, Inc. | Unithane IC-151 NF is an anionic APEO free dispersion of an aliphatic polyester-based urethane in water using a co-solvent of Dipropylene glycol dimethyl ether. It provides good gloss, adhesion, and chemical resistance properties. This product has a gloss...展開 Unithane IC-151 NF is an anionic APEO free dispersion of an aliphatic polyester-based urethane in water using a co-solvent of Dipropylene glycol dimethyl ether. It provides good gloss, adhesion, and chemical resistance properties. This product has a gloss at 60º of 90 and a viscosity at 25°C of 10-150cps. It is often designed for industrial coatings, interior coatings, wood, paints, and graphic arts. 收起 | |
| Unithane IC-204 | Union Specialties, Inc. | Unithane IC-204 is a NMP containing, extremely hard, high gloss, APEO free, water-based polyurethane dispersion with exceptional chemical resistance properties. This product has a gloss at 60° of 85 and a viscosity at 25°C of 50cps. It is often used in a ...展開 Unithane IC-204 is a NMP containing, extremely hard, high gloss, APEO free, water-based polyurethane dispersion with exceptional chemical resistance properties. This product has a gloss at 60° of 85 and a viscosity at 25°C of 50cps. It is often used in a formulated topcoat for wood, metal, flooring, and paints. It can also be used in interior and exterior coatings and graphic arts and inks. 收起 | |
| Unithane IC-301 | Union Specialties, Inc. | Unithane IC-301 is a NMP containing, uniquely hard, high gloss, APEO free, water-based polyurethane dispersion with good abrasion and chemical resistance properties. This product has a gloss at 60° of 88 and a viscosity at 25°C of 50ps. It is often used i...展開 Unithane IC-301 is a NMP containing, uniquely hard, high gloss, APEO free, water-based polyurethane dispersion with good abrasion and chemical resistance properties. This product has a gloss at 60° of 88 and a viscosity at 25°C of 50ps. It is often used in a formulated topcoat for wood, metal, flooring, and paints. It can also be used in graphic arts and exterior coatings. 收起 | |
| Unithane IC-352 NF | Union Specialties, Inc. | Unithane IC-352 NF is a NMP free, uniquely hard, high gloss, APEO free, water-based polyurethane dispersion with fast drying and high chemical resistance properties. This product has a gloss at 60° of 88 and a viscosity at 25°C of 10-500cps. It is often u...展開 Unithane IC-352 NF is a NMP free, uniquely hard, high gloss, APEO free, water-based polyurethane dispersion with fast drying and high chemical resistance properties. This product has a gloss at 60° of 88 and a viscosity at 25°C of 10-500cps. It is often used in formulated topcoat for wood, metal, flooring, graphic arts, and paints. 收起 | |
| Unithane IC-357 NF | Union Specialties, Inc. | Unithane IC-357 NF is a NMP free, uniquely hard, low VOC, high gloss, APEO free, water-based polyurethane dispersion that has abrasion and chemical resistance properties. This product has a gloss at 60° of 89 and a viscosity at 25°C of 50cps. It is design...展開 Unithane IC-357 NF is a NMP free, uniquely hard, low VOC, high gloss, APEO free, water-based polyurethane dispersion that has abrasion and chemical resistance properties. This product has a gloss at 60° of 89 and a viscosity at 25°C of 50cps. It is designed for use in a formulated topcoat for wood, metal, concrete, graphic arts, and paints. 收起 | |
| Unithane IC-400 | Union Specialties, Inc. | Unithane IC-400 is a NMP containing, medium soft, high gloss, APEO free, water-based polyurethane dispersion with fast drying, flexibility, and automotive grade properties. This product has a gloss at 60° of 86 and a viscosity at 25°C of 50cps. It is suit...展開 Unithane IC-400 is a NMP containing, medium soft, high gloss, APEO free, water-based polyurethane dispersion with fast drying, flexibility, and automotive grade properties. This product has a gloss at 60° of 86 and a viscosity at 25°C of 50cps. It is suitable for use in a formulated coating or sealer coat for wood, paint, inks, adhesives, and graphic arts. 收起 | |
| Unithane IC-405 | Union Specialties, Inc. | Unithane IC-405 is an NMP containing, medium soft, low VOC, high gloss, APEO free, water-based polyurethane dispersion that has film clarity and flexibility properties. This product has a gloss at 60º of 91 and a viscosity at 25°C of 50cps. It is often us...展開 Unithane IC-405 is an NMP containing, medium soft, low VOC, high gloss, APEO free, water-based polyurethane dispersion that has film clarity and flexibility properties. This product has a gloss at 60º of 91 and a viscosity at 25°C of 50cps. It is often used in a formulated topcoat for interior coatings, graphic arts, and exterior coatings. 收起 | |
| Unithane IC-451 NF | Union Specialties, Inc. | Unithane IC-451 NF is a NMP free, medium hard, high gloss, APEO free, water-based polyurethane dispersion that has fast drying and has automotive grade properties. This product has a gloss at 60º of 86 and a viscosity at 25°C of 100cps. It is designed for...展開 Unithane IC-451 NF is a NMP free, medium hard, high gloss, APEO free, water-based polyurethane dispersion that has fast drying and has automotive grade properties. This product has a gloss at 60º of 86 and a viscosity at 25°C of 100cps. It is designed for use in a formulated coating for wood, metal, concrete, flooring, graphic arts, and paints. 收起 | |
| Unithane IC-454 NF | Union Specialties, Inc. | Unithane IC-454 NF is an anionic NMP free and APEO free dispersion of an aliphatic polyester/polyether based urethane in water using a co-solvent of dipropylene glycol dimethyl ether. This product has a gloss at 60º of 70-100 and a viscosity at 25°C of 10...展開 Unithane IC-454 NF is an anionic NMP free and APEO free dispersion of an aliphatic polyester/polyether based urethane in water using a co-solvent of dipropylene glycol dimethyl ether. This product has a gloss at 60º of 70-100 and a viscosity at 25°C of 10-500cps. It is designed for use in industrial coatings, graphic arts, and exterior coatings. 收起 | |
| Unithane IC-501 | Union Specialties, Inc. | Unithane IC-501 is a NMP containing, medium soft, high gloss, APEO free, water-based polyurethane dispersion that has adhesion and tack-free properties. This product has a gloss at 60º of 85 and a viscosity at 25°C of 100cps. It is designed for use in a f...展開 Unithane IC-501 is a NMP containing, medium soft, high gloss, APEO free, water-based polyurethane dispersion that has adhesion and tack-free properties. This product has a gloss at 60º of 85 and a viscosity at 25°C of 100cps. It is designed for use in a formulated primer coat for paints, graphic arts, adhesives, and primers. 收起 | |
| Unithane IC-505 | Union Specialties, Inc. | Unithane IC-505 is a NMP containing, soft, low VOC, high gloss, APEO free, water-based polyurethane dispersion that has adhesion, flexibility, and automotive grade properties. This product has a gloss at 60º of 82 and a viscosity at 25°C of 1-500cps. It i...展開 Unithane IC-505 is a NMP containing, soft, low VOC, high gloss, APEO free, water-based polyurethane dispersion that has adhesion, flexibility, and automotive grade properties. This product has a gloss at 60º of 82 and a viscosity at 25°C of 1-500cps. It is suitable for use in a formulated primer coat for concrete, automotive, metal, graphic arts, and adhesives. 收起 | |
| Unithane IC-551 NF | Union Specialties, Inc. | Unithane IC-551 NF is an anionic NMP free and APEO free dispersion that provides good gloss, flexibility, and adhesion properties. This product has a gloss at 60º of 86 and a viscosity at 25°C of 150cps. It is often designed for industrial coatings, inter...展開 Unithane IC-551 NF is an anionic NMP free and APEO free dispersion that provides good gloss, flexibility, and adhesion properties. This product has a gloss at 60º of 86 and a viscosity at 25°C of 150cps. It is often designed for industrial coatings, interior coatings, paints, graphic arts, adhesives and primers. 收起 | |
| Unithane IC-555 NF | Union Specialties, Inc. | Unithane IC-555 NF is a NMP Free, soft, low VOC, high gloss, APEO free, water-based polyurethane dispersion with good adhesion, flexibility, and automotive grade properties. This product has a gloss at 60º of 82 and a viscosity at 25°C of 1-500cps. It is ...展開 Unithane IC-555 NF is a NMP Free, soft, low VOC, high gloss, APEO free, water-based polyurethane dispersion with good adhesion, flexibility, and automotive grade properties. This product has a gloss at 60º of 82 and a viscosity at 25°C of 1-500cps. It is often designed for use in a formulated primer coat for concrete, graphic arts, adhesives, primers, and automotive coatings. 收起 | |
| Unithane IC-803 | Union Specialties, Inc. | Unithane IC-803 is a NMP containing, uniquely soft, low VOC, medium gloss, APEO free, water-based polyurethane dispersion that has a soft feel, flexibility, and automotive grade properties. This product has a gloss at 60º of 80 and a viscosity at 25°C of ...展開 Unithane IC-803 is a NMP containing, uniquely soft, low VOC, medium gloss, APEO free, water-based polyurethane dispersion that has a soft feel, flexibility, and automotive grade properties. This product has a gloss at 60º of 80 and a viscosity at 25°C of 150cps. It is suitable for use in a formulated coating for graphic arts, metal, automotive, paints, and adhesives. 收起 | |
| Unithane IC-805 | Union Specialties, Inc. | Unithane IC-805 is a NMP containing, medium hard, high gloss, APEO free, water-based polyurethane dispersion. This product has a gloss at 60º of 91 and a viscosity at 25°C of 100cps. It is suitable for use in a formulated topcoat for wood, metal, concrete...展開 Unithane IC-805 is a NMP containing, medium hard, high gloss, APEO free, water-based polyurethane dispersion. This product has a gloss at 60º of 91 and a viscosity at 25°C of 100cps. It is suitable for use in a formulated topcoat for wood, metal, concrete, flooring, and graphic arts. 收起 | |
| Unithane IC-807 SF | Union Specialties, Inc. | Unithane IC-807 SF is a solvent free, medium soft, high gloss, APEO free, water-based polyurethane dispersion that has additive compatibility and flexibility properties. This product has a gloss at 60º of 88 and a viscosity at 25°C of 150 cps. It is devel...展開 Unithane IC-807 SF is a solvent free, medium soft, high gloss, APEO free, water-based polyurethane dispersion that has additive compatibility and flexibility properties. This product has a gloss at 60º of 88 and a viscosity at 25°C of 150 cps. It is developed for use in a formulated coating for graphic arts, concrete, paint, automotive, inks, and adhesives. 收起 | |
| Unithane IC-850 NF | Union Specialties, Inc. | Unithane IC-850 NF is a NMP free, uniquely soft, low VOC, medium gloss, APEO free, water-based polyurethane dispersion that has soft feel, flexibility, and automotive grade properties. This product has a gloss at 60º of 88 and a viscosity at 25°C of 150cp...展開 Unithane IC-850 NF is a NMP free, uniquely soft, low VOC, medium gloss, APEO free, water-based polyurethane dispersion that has soft feel, flexibility, and automotive grade properties. This product has a gloss at 60º of 88 and a viscosity at 25°C of 150cps. It is designed for use in a formulated coating for graphic arts, metal, adhesives, automotive, and paints. 收起 | |
| Unithane IC-901 | Union Specialties, Inc. | Unithane IC-901 is a NMP containing, soft, low VOC, high gloss, APEO free, water-based polyurethane dispersion with good adhesion, flexibility, and automotive grade properties. This product has a gloss at 60º of 75 and a viscosity at 25°C of 10-200cps. It...展開 Unithane IC-901 is a NMP containing, soft, low VOC, high gloss, APEO free, water-based polyurethane dispersion with good adhesion, flexibility, and automotive grade properties. This product has a gloss at 60º of 75 and a viscosity at 25°C of 10-200cps. It is suitable for use in a formulated primer coat for concrete, graphic arts, adhesives, and exterior coatings. 收起 | |
| Unithane IC-950 NF | Union Specialties, Inc. | Unithane IC-950 NF is a NMP free, soft, low VOC, high gloss, APEO free, water-based polyurethane dispersion with exceptional adhesion, flexibility, and automotive grade properties. This product has a gloss at 60º of 80 and a viscosity at 25°C of 10-500cps...展開 Unithane IC-950 NF is a NMP free, soft, low VOC, high gloss, APEO free, water-based polyurethane dispersion with exceptional adhesion, flexibility, and automotive grade properties. This product has a gloss at 60º of 80 and a viscosity at 25°C of 10-500cps. It is specifically designed for use in a formulated primer coat for concrete, graphic arts, automotive, metal, adhesives, and paints. 收起 | |
| Unithane IC-953 CP | Union Specialties, Inc. | Unithane IC-953 CP is a NMP free, soft, low VOC, high gloss, APEO free, water-based polyurethane dispersion that has extremely good adhesion to concrete properties. This product has a gloss at 60º of 75 and a viscosity at 25°C of 50-500cps. It is designed...展開 Unithane IC-953 CP is a NMP free, soft, low VOC, high gloss, APEO free, water-based polyurethane dispersion that has extremely good adhesion to concrete properties. This product has a gloss at 60º of 75 and a viscosity at 25°C of 50-500cps. It is designed for use in a formulated primer coat for concrete, automotive, metal, graphic arts, adhesives, and flooring coatings. 收起 | |
| Unithane MP-270 | Union Specialties, Inc. | Unithane MP-270 is a NMP free matte water-based polyurethane that is silica free and has excellent jettness, flexibility, and low gloss properties. This product has a gloss at 60º of 0-2 and a viscosity at 25°C of 700-1200cps. It is designed for use in co...展開 Unithane MP-270 is a NMP free matte water-based polyurethane that is silica free and has excellent jettness, flexibility, and low gloss properties. This product has a gloss at 60º of 0-2 and a viscosity at 25°C of 700-1200cps. It is designed for use in coatings and graphic arts. 收起 | |
| Unithane MP-611 NF | Union Specialties, Inc. | Unithane MP-611 NF is a NMP free, soft, inherently dull, APEO free, water-based polyurethane dispersion with automotive grade properties. This product has a gloss at 60º of 1.0 and a viscosity at 25°C of 800cps. It is designed for use in a formulated coat...展開 Unithane MP-611 NF is a NMP free, soft, inherently dull, APEO free, water-based polyurethane dispersion with automotive grade properties. This product has a gloss at 60º of 1.0 and a viscosity at 25°C of 800cps. It is designed for use in a formulated coating for graphic arts, paints, automotive, and interior coatings. 收起 | |
| Unithane MP-612 NF | Union Specialties, Inc. | Unithane MP-612 NF is a NMP free, soft, inherently dull, APEO free, water-based polyurethane dispersion with automotive grade properties. This product has a gloss at 60º of 0-2 and a viscosity at 25°C of 700-1200cps. It is designed for use in a formulated...展開 Unithane MP-612 NF is a NMP free, soft, inherently dull, APEO free, water-based polyurethane dispersion with automotive grade properties. This product has a gloss at 60º of 0-2 and a viscosity at 25°C of 700-1200cps. It is designed for use in a formulated coating for graphic arts, paints, automotive, and interior coatings. 收起 | |
| Unithane SX-207 SF | Union Specialties, Inc. | Unithane SX-207 SF is an APEO free dispersion of an aliphatic polyester-based urethane in water made without using a co-solvent. It has good gloss and abrasion resistance properties. This product has a gloss at 60º of 87 and a viscosity at 25°C of 100cps....展開 Unithane SX-207 SF is an APEO free dispersion of an aliphatic polyester-based urethane in water made without using a co-solvent. It has good gloss and abrasion resistance properties. This product has a gloss at 60º of 87 and a viscosity at 25°C of 100cps. It is designed for industrial coating applications, wood, concrete, paints, graphic arts, and metal. 收起 | |
| Unithane SX-284 NF | Union Specialties, Inc. | Unithane SX-284 NF is a self-crosslinking, NMP free, extremely hard, high gloss, APEO free, water-based polyurethane dispersion that has good stain and chemical resistance properties. This product has a gloss at 60º of 90 and a viscosity at 25°C of 300cps...展開 Unithane SX-284 NF is a self-crosslinking, NMP free, extremely hard, high gloss, APEO free, water-based polyurethane dispersion that has good stain and chemical resistance properties. This product has a gloss at 60º of 90 and a viscosity at 25°C of 300cps. It is designed for use in a formulated topcoat for wood, metal, concrete, graphic arts, and paints. 收起 | |
| Unithane SX-482 NF | Union Specialties, Inc. | Unithane SX-482 NF is a self-crosslinking, NMP free, medium hard, high gloss, APEO free, water-based polyurethane dispersion with fast drying and good chemical resistance properties. This product has a gloss at 60º of 90 and a viscosity at 25°C of 100cps....展開 Unithane SX-482 NF is a self-crosslinking, NMP free, medium hard, high gloss, APEO free, water-based polyurethane dispersion with fast drying and good chemical resistance properties. This product has a gloss at 60º of 90 and a viscosity at 25°C of 100cps. It is specifically designed for use in a formulated coating for wood, metal, concrete, graphic arts, and paints. 收起 | |
| Unithane SX-487 SF | Union Specialties, Inc. | Unithane SX-487 SF is a self-crosslinking, solvent free, medium hard, high gloss, APEO free, water-based polyurethane dispersion that has good chemical and abrasion resistance properties. This product has a gloss at 60º of 89 and a viscosity at 25°C of 10...展開 Unithane SX-487 SF is a self-crosslinking, solvent free, medium hard, high gloss, APEO free, water-based polyurethane dispersion that has good chemical and abrasion resistance properties. This product has a gloss at 60º of 89 and a viscosity at 25°C of 100cps. It is designed for use in a formulated coating for graphic arts, wood, adhesives, and paints. 收起 |
