| ANCAMIDE® 220-X-70 Curing Agent | Evonik Operations GmbH, BL Crosslinkers | ANCAMIDE® 220-X-70 Curing Agent is one in a series of standard reactive polyamides intended for use in the curing of epoxy resins. It is ideal for use in solvent-based maintenance coatings, primers, sealers and coatings for concrete. | Request Sample |
| ANCAREZ® AR555 Waterborne Epoxy Resin | Evonik Operations GmbH, BL Crosslinkers | ANCAREZ® AR555 Waterborne Epoxy Resin is a waterborne solid epoxy resin dispersion delivered at 55% solids in water. It is designed for use in two-component, ambient-cure epoxy systems. It delivers superior performance at lower cost when compared to con...展開 ANCAREZ® AR555 Waterborne Epoxy Resin is a waterborne solid epoxy resin dispersion delivered at 55% solids in water. It is designed for use in two-component, ambient-cure epoxy systems. It delivers superior performance at lower cost when compared to conventional solid resin dispersions. The unique nature of this product allows film formulation without high levels of coalescing solvent, which enables the formulation of low-odor, zero-VOC systems. 收起 | Request Sample |
| Barium Sulphate BS-419 | Briture Co., Ltd. | Barium Sulphate BS-419 is a chemically synthesized barium sulfate product refined with barium salt and sodium sulfate. This product shields x-rays and y-rays, and can improve the gloss and surface hardness of products. Barium Sulphate BS-419 is used in po...展開 Barium Sulphate BS-419 is a chemically synthesized barium sulfate product refined with barium salt and sodium sulfate. This product shields x-rays and y-rays, and can improve the gloss and surface hardness of products. Barium Sulphate BS-419 is used in powder coatings and printing ink. 收起 | |
| Chlorinated Polypropylene Granular Form | Briture Co., Ltd. | Chlorinated Polypropylene Granular Form is a white or pale yellow granular chlorinated polypropylene adhesive agent that is completely soluble in toluene and xylene. This product has good fluidity and good weather, thermal aging, oil, ozone, chemical and ...展開 Chlorinated Polypropylene Granular Form is a white or pale yellow granular chlorinated polypropylene adhesive agent that is completely soluble in toluene and xylene. This product has good fluidity and good weather, thermal aging, oil, ozone, chemical and fire resistance. Chlorinated Polypropylene Granular Form is used in composite printing inks, coating film, and plastics paint. 收起 | |
| EPODIL® 742 | Evonik Operations GmbH, BL Crosslinkers | An epoxy resin system modifier. | Request Sample |
| EPODIL® 759 Reactive Diluent | Evonik Operations GmbH, BL Crosslinkers | EPODIL® 759 Reactive Diluent is an aliphatic glycidyl ether (C12– C13). The product is a monofunctional reactive diluent used to reduce the viscosity of epoxy resin systems. Since monofunctional diluents, in general, cause molecular weight chain terminati...展開 EPODIL® 759 Reactive Diluent is an aliphatic glycidyl ether (C12– C13). The product is a monofunctional reactive diluent used to reduce the viscosity of epoxy resin systems. Since monofunctional diluents, in general, cause molecular weight chain termination, the minimum amount necessary to achieve the desired viscosity reduction should be used. 收起 | Request Sample |
| HYBRIDUR® 580 Polymer Dispersion | Evonik Operations GmbH, BL Crosslinkers | HYBRIDUR® 580 Polymer Dispersion is an acrylic-urethane hybrid polymer dispersion. Cost-effective alternative to standard polyurethane dispersions. Provides outstanding adhesion to a wide variety of substrates, superior abrasion, and chemical and stain re...展開 HYBRIDUR® 580 Polymer Dispersion is an acrylic-urethane hybrid polymer dispersion. Cost-effective alternative to standard polyurethane dispersions. Provides outstanding adhesion to a wide variety of substrates, superior abrasion, and chemical and stain resistance. 收起 | Request Sample |
| IMICURE® AMI-1 Curing Agent | Evonik Operations GmbH, BL Crosslinkers | IMICURE® AMI-1 Curing Agent is a liquid, elevated-temperature curing agent for epoxy resins. It is readily compatible with both liquid and solid epoxy resins, and because it is a catalytic curing agent, it is used at low loadings of 1−5 phr. It is ideal f...展開 IMICURE® AMI-1 Curing Agent is a liquid, elevated-temperature curing agent for epoxy resins. It is readily compatible with both liquid and solid epoxy resins, and because it is a catalytic curing agent, it is used at low loadings of 1−5 phr. It is ideal for use in adhesives, pre-preg composites, and encapsulation. 收起 | Request Sample |
| IMICURE® EMI-24 Curing Agent | Evonik Operations GmbH, BL Crosslinkers | IMICURE® EMI-24 Curing Agent s a liquid imidazole which functions as both a curing agent and a cure accelerator for high-performance epoxy resin systems. This unusually versatile imidazole is readily processed, and provides excellent physical properties a...展開 IMICURE® EMI-24 Curing Agent s a liquid imidazole which functions as both a curing agent and a cure accelerator for high-performance epoxy resin systems. This unusually versatile imidazole is readily processed, and provides excellent physical properties across a wide range of curing temperatures. 收起 | Request Sample |
| IMICURE® Imidazole Curing Agent | Evonik Operations GmbH, BL Crosslinkers | IMICURE® Imidazole Curing Agent is an elevated-temperature curing agent for epoxy resins. It is readily compatible with both liquid and solid epoxy resins, and because it is a catalytic curing agent, it is used at low loadings of 1−5 phr. It is a good acc...展開 IMICURE® Imidazole Curing Agent is an elevated-temperature curing agent for epoxy resins. It is readily compatible with both liquid and solid epoxy resins, and because it is a catalytic curing agent, it is used at low loadings of 1−5 phr. It is a good accelerator for dicyandiamide, anhydride and phenolic curing agents. 收起 | Request Sample |
| Kalama® Benzaldehyde | LANXESS (former Emerald Performance Materials) | Kalama® Benzaldehyde is an industrially useful aromatic aldehyde used as a solvent in graphic arts and ink applications. LANXESS’s leadership position and dual production locations (in the U.S. and Europe) allow us to set the standards for quality, reli...展開 Kalama® Benzaldehyde is an industrially useful aromatic aldehyde used as a solvent in graphic arts and ink applications. LANXESS’s leadership position and dual production locations (in the U.S. and Europe) allow us to set the standards for quality, reliability, and security of supply. LANXESS’s manufacturing process also uses oxidation technology, ensuring that Kalama® Benzaldehyde does not contain chlorine residuals (low-chlorine or chlorine-free benzaldehyde), in contrast to many competitive benzaldehyde offerings. It is produced using the highest standards for quality and sustainability, including ISO 9001:2015 and ISO 45001:2018. Emerald Kalama Chemical was acquired by LANXESS in 2021. 收起 | |
| Kalama® Benzyl Alcohol NF/FCC | LANXESS (former Emerald Performance Materials) | Kalama® Benzyl Alcohol brings performance and value to a wide range of applications, functioning primarily as a building block, general solvent, or diluent. In inks and lacquers, Kalama® Benzyl Alcohol Technical is valued as a general solvent due to its l...展開 Kalama® Benzyl Alcohol brings performance and value to a wide range of applications, functioning primarily as a building block, general solvent, or diluent. In inks and lacquers, Kalama® Benzyl Alcohol Technical is valued as a general solvent due to its low volatility and low toxicity. It is available in technical, FCC, and parenteral grades. All grades are produced using the highest standards for quality and sustainability, including ISO 9001:2015 and ISO 14001:2015. Emerald Kalama Chemical was acquired by LANXESS in 2021. 收起 | |
| Kalama® Benzyl Alcohol Technical Grade | LANXESS (former Emerald Performance Materials) | Kalama® Benzyl Alcohol brings performance and value to a wide range of applications, functioning primarily as a building block, general solvent, or diluent. In inks and lacquers, Kalama® Benzyl Alcohol Technical is valued as a general solvent due to its l...展開 Kalama® Benzyl Alcohol brings performance and value to a wide range of applications, functioning primarily as a building block, general solvent, or diluent. In inks and lacquers, Kalama® Benzyl Alcohol Technical is valued as a general solvent due to its low volatility and low toxicity. It is available in technical, FCC, and parenteral grades. All grades are produced using the highest standards for quality and sustainability, including ISO 9001:2015 and ISO 14001:2015. Emerald Kalama Chemical was acquired by LANXESS in 2021. 收起 | |
| Phthalic Anhydride | Thirumalai Chemicals Ltd | Phthalic Anhydride are white flakes and an aromatic di-carboxylic acid anhydride commonly used in production of alkyd resins for paints, inks and coatings, including lacquers, pigments and varnishes. | |
| Polyamide Resin Alcohol Soluble PA-010 | Briture Co., Ltd. | Polyamide Resin Alcohol Soluble PA-010 is a transparent yellowish granular polyamide resin. This product is water and gel resistant with good gloss, fluidity and pigment wetting properties. It also has good compatibility with nitrocotton and varnish stabi...展開 Polyamide Resin Alcohol Soluble PA-010 is a transparent yellowish granular polyamide resin. This product is water and gel resistant with good gloss, fluidity and pigment wetting properties. It also has good compatibility with nitrocotton and varnish stability. Polyamide Resin Alcohol Soluble PA-010 is used in flexographic plastic ink, printing ink, and heat seal coating. 收起 | |
| Polyamide Resin Co-Solvent Soluble | Briture Co., Ltd. | Polyamide Resin Co-Solvent Soluble is a benzene soluble polyamide resin. This product has good stability, solvent liberation, bending flexure, glossiness, adhesive power, solvent release and gel resistance. Polyamide Resin Co-Solvent Soluble is used in va...展開 Polyamide Resin Co-Solvent Soluble is a benzene soluble polyamide resin. This product has good stability, solvent liberation, bending flexure, glossiness, adhesive power, solvent release and gel resistance. Polyamide Resin Co-Solvent Soluble is used in various printing inks. 收起 | |
| Thermoplastic Solid Acrylic Resin BA-66 | Briture Co., Ltd. | Thermoplastic Solid Acrylic Resin BA-66 is a white powder that can be dissolved in ester kind, ketone and kind solvent. This product has good luster, rigidity, pigment dispersion and chemical and weathering resistance. Thermoplastic Solid Acrylic Resin BA...展開 Thermoplastic Solid Acrylic Resin BA-66 is a white powder that can be dissolved in ester kind, ketone and kind solvent. This product has good luster, rigidity, pigment dispersion and chemical and weathering resistance. Thermoplastic Solid Acrylic Resin BA-66 is used in soft plastic paint, plastic printing ink, container paint, and industry paint. 收起 | |
| Titanium Dioxide Anatase BA-01 | Briture Co., Ltd. | Titanium Dioxide Anatase BA-01 is a white titanium dioxide powdered pigment. This product has tinting power and fineness and dispersibility properties. Titanium Dioxide Anatase BA-01 is used in paints. | |
| Titanium Dioxide Rutile BR-889 | Briture Co., Ltd. | Titanium Dioxide Rutile BR-889 is a powdered titanium dioxide white pigment with high gloss. This product has high weather resistance and hiding powder, a stable hue, and is easy for damping and dispersion. Titanium Dioxide Rutile BR-889 is used in high-l...展開 Titanium Dioxide Rutile BR-889 is a powdered titanium dioxide white pigment with high gloss. This product has high weather resistance and hiding powder, a stable hue, and is easy for damping and dispersion. Titanium Dioxide Rutile BR-889 is used in high-level solvent coatings, high gloss paint, industrial paint, surface printing ink, iron printing ink, and powder coatings. 收起 | |
| Tri Isobutyl Phosphate 99%min | Briture Co., Ltd. | Tri Isobutyl Phosphate 99%min is a colorless transparent liquid. This product is used as a defoamer. Tri Isobutyl Phosphate 99%min is used in dyeing and printing ink. | |
| VESTALITE® S 101 | Evonik Operations GmbH, BL Crosslinkers | VESTALITE® S 101 is a curing agent for epoxy resin matrix designed for SMC applications. Systems using VESTALITE® S 101 have a low initial viscosity during compounding, allowing excellent fiber wetting, highfiber volume fraction and efficient process...展開 VESTALITE® S 101 is a curing agent for epoxy resin matrix designed for SMC applications. Systems using VESTALITE® S 101 have a low initial viscosity during compounding, allowing excellent fiber wetting, highfiber volume fraction and efficient processing. The high reactivity of the hardener allows fast curing inabout 4 - 5 min at 150 °. 收起 | Request Sample |
| VESTALITE® S 102 | Evonik Operations GmbH, BL Crosslinkers | VESTALITE® S 102 is a curing agent for epoxy resin matrix designed for SMC applications. Systems using VESTALITE® S 102 have a low initial viscosity during compounding, allowing excellent fiber wetting, high fiber volume fraction and efficient processing....展開 VESTALITE® S 102 is a curing agent for epoxy resin matrix designed for SMC applications. Systems using VESTALITE® S 102 have a low initial viscosity during compounding, allowing excellent fiber wetting, high fiber volume fraction and efficient processing. The high reactivity of the hardener allows fast curing in about3 min at 150 °C. 收起 | Request Sample |
| VESTANAT® EP-EF 201 | Evonik Operations GmbH, BL Crosslinkers | VESTANAT® EP-EF 201 is a ready catalyzed polyethoxysilane. It is used as a crosslinker or sole binder to formulate highly scratch- and chemical resistant coatings, e. g. highly scratch resistant NISO*2coatings. The crosslinker is appropriate f...展開 VESTANAT® EP-EF 201 is a ready catalyzed polyethoxysilane. It is used as a crosslinker or sole binder to formulate highly scratch- and chemical resistant coatings, e. g. highly scratch resistant NISO*2coatings. The crosslinker is appropriate for the use in "do-it-yourself" (DIY) applications. 收起 | Request Sample |
| VESTANAT® EP-IPMS | Evonik Operations GmbH, BL Crosslinkers | VESTANAT® EP-IPMS is an isocyanate building block for the preparation of silane modified urethane resins. These resins may be used for the production of isocyanate-free, moisture curing adhesives, sealants and weatherable, UV- and ...展開 VESTANAT® EP-IPMS is an isocyanate building block for the preparation of silane modified urethane resins. These resins may be used for the production of isocyanate-free, moisture curing adhesives, sealants and weatherable, UV- and scratch-resistant coatings. 收起 | Request Sample |
| VESTANAT® EP-M 222 X | Evonik Operations GmbH, BL Crosslinkers | VESTANAT® EP-M 222 X is a methoxysilane functional urethane crosslinker that can be used as a crosslinker to increase the flexibility of highly scratch resistant coatings, e.g. highly scratch resistant NISO*2 coatings. It is dissolved at 85 % ...展開 VESTANAT® EP-M 222 X is a methoxysilane functional urethane crosslinker that can be used as a crosslinker to increase the flexibility of highly scratch resistant coatings, e.g. highly scratch resistant NISO*2 coatings. It is dissolved at 85 % in xylene, allowing it to be used in low-VOC coatings formulation. 收起 | Request Sample |
| VESTANAT® EP-M 60 | Evonik Operations GmbH, BL Crosslinkers | VESTANAT® EP-M 60 is a solvent free, polyfunctional methoxy silane. It is used as a crosslinker toformulate highly scratch resistant coatings. | Request Sample |
| VESTANAT® EP-MF 203 | Evonik Operations GmbH, BL Crosslinkers | VESTANAT® EP-MF 203 is a solvent free and ready catalyzed polymethoxysilane. It is used as a crosslinker or sole binder to formulate highly scratch- and chemical resistant coating, e. g. highly scratch resistant NISO*2coatings. | Request Sample |
| VESTANAT® EP-MF 204 | Evonik Operations GmbH, BL Crosslinkers | VESTANAT® EP-MF 204 is a solvent free and ready catalyzed polymethoxysilane. It is used as a crosslinker or sole binder to formulate highly scratch- and chemical resistant coating, e. g. highly scratch resistant NISO*2 coatings. | Request Sample |
| VESTANAT® EP-MF 205 | Evonik Operations GmbH, BL Crosslinkers | VESTANAT® EP-MF 205 is a solvent-based, ready catalyzed polymethoxysilane. It is used as a crosslinker or sole binder to formulate extremely flexible, highly scratch- and chemical resistant coatings., e.g. highly scratch resistant NISO*2coatings. VESTA...展開 VESTANAT® EP-MF 205 is a solvent-based, ready catalyzed polymethoxysilane. It is used as a crosslinker or sole binder to formulate extremely flexible, highly scratch- and chemical resistant coatings., e.g. highly scratch resistant NISO*2coatings. VESTANAT® EP-MF 205 is particularly characterized by an optimized price/performance ratio and a harmoniously tuned mechanical property profile. 收起 | Request Sample |
