Fintac2331 Non-Crystallizing Rosin | Finjet Chemical Industries, Ltd. | Fintac2331 Non-Crystallizing Rosin, in the form of a solid or flake, is a modified rosin that offers good combination of crystallization resistance and oxidation. This product is applied as a tackifier for polymers, and has suggested applications in water...展開 Fintac2331 Non-Crystallizing Rosin, in the form of a solid or flake, is a modified rosin that offers good combination of crystallization resistance and oxidation. This product is applied as a tackifier for polymers, and has suggested applications in water-based adhesives, pressure sensitive sealants, and alcohol soluble printing inks and paints. 收起 | |
Fintac2333 Modified Rosin Resin | Finjet Chemical Industries, Ltd. | Fintac2333 Modified Rosin Resin is a low odor, non-crystallization rosin resin that is used to formulate numerous kinds of water-based and hot melt adhesives, effectively improving their original low temperature property and adhesion. This product is also...展開 Fintac2333 Modified Rosin Resin is a low odor, non-crystallization rosin resin that is used to formulate numerous kinds of water-based and hot melt adhesives, effectively improving their original low temperature property and adhesion. This product is also applicable for alcohol soluble paints and inks. 收起 | |
Fintac5336 Polymerized Rosin | Finjet Chemical Industries, Ltd. | Fintac5336 Polymerized Rosin is a selectively polymerized rosin that has a higher softening point, good oxidation resistance, and higher heat resistance to adhesives. This product is mainly applied in adhesives, inks, synthetic resins, varnishes, and pain...展開 Fintac5336 Polymerized Rosin is a selectively polymerized rosin that has a higher softening point, good oxidation resistance, and higher heat resistance to adhesives. This product is mainly applied in adhesives, inks, synthetic resins, varnishes, and paints. 收起 | |
Fumaric Acid | Bartek Ingredients Inc. | Fumaric Acid is an organic, non-hygroscopic white crystal. It is made from N-butane that is oxidized into maleic acid which is then isomerized into fumaric acid. It finds application in printing inks. | |
Kalama® Benzaldehyde | LANXESS (former Emerald Performance Materials) | Kalama® Benzaldehyde is an industrially useful aromatic aldehyde used as a solvent in graphic arts and ink applications. LANXESS’s leadership position and dual production locations (in the U.S. and Europe) allow us to set the standards for quality, reli...展開 Kalama® Benzaldehyde is an industrially useful aromatic aldehyde used as a solvent in graphic arts and ink applications. LANXESS’s leadership position and dual production locations (in the U.S. and Europe) allow us to set the standards for quality, reliability, and security of supply. LANXESS’s manufacturing process also uses oxidation technology, ensuring that Kalama® Benzaldehyde does not contain chlorine residuals (low-chlorine or chlorine-free benzaldehyde), in contrast to many competitive benzaldehyde offerings. It is produced using the highest standards for quality and sustainability, including ISO 9001:2015 and ISO 45001:2018. Emerald Kalama Chemical was acquired by LANXESS in 2021. 收起 | |
Kalama® Benzyl Alcohol NF/FCC | LANXESS (former Emerald Performance Materials) | Kalama® Benzyl Alcohol brings performance and value to a wide range of applications, functioning primarily as a building block, general solvent, or diluent. In inks and lacquers, Kalama® Benzyl Alcohol Technical is valued as a general solvent due to its l...展開 Kalama® Benzyl Alcohol brings performance and value to a wide range of applications, functioning primarily as a building block, general solvent, or diluent. In inks and lacquers, Kalama® Benzyl Alcohol Technical is valued as a general solvent due to its low volatility and low toxicity. It is available in technical, FCC, and parenteral grades. All grades are produced using the highest standards for quality and sustainability, including ISO 9001:2015 and ISO 14001:2015. Emerald Kalama Chemical was acquired by LANXESS in 2021. 收起 | |
Kalama® Benzyl Alcohol Technical Grade | LANXESS (former Emerald Performance Materials) | Kalama® Benzyl Alcohol brings performance and value to a wide range of applications, functioning primarily as a building block, general solvent, or diluent. In inks and lacquers, Kalama® Benzyl Alcohol Technical is valued as a general solvent due to its l...展開 Kalama® Benzyl Alcohol brings performance and value to a wide range of applications, functioning primarily as a building block, general solvent, or diluent. In inks and lacquers, Kalama® Benzyl Alcohol Technical is valued as a general solvent due to its low volatility and low toxicity. It is available in technical, FCC, and parenteral grades. All grades are produced using the highest standards for quality and sustainability, including ISO 9001:2015 and ISO 14001:2015. Emerald Kalama Chemical was acquired by LANXESS in 2021. 收起 | |
Phthalic Anhydride | Thirumalai Chemicals Ltd | Phthalic Anhydride are white flakes and an aromatic di-carboxylic acid anhydride commonly used in production of alkyd resins for paints, inks and coatings, including lacquers, pigments and varnishes. | |
Synpol B-10 | Synpol Products PVT. Ltd | Synpol B-10 is a thermoplastic homopolymer acrylic resin solution. This product has a density of 0.98-0.99 g/cm3 and a total non-volatile content of 38-42%. Synpol B-10 is most commonly used in screen printing, vinyl coating, plastic coating, gravure pr...展開 Synpol B-10 is a thermoplastic homopolymer acrylic resin solution. This product has a density of 0.98-0.99 g/cm3 and a total non-volatile content of 38-42%. Synpol B-10 is most commonly used in screen printing, vinyl coating, plastic coating, gravure printing ink, and PVC coating primer applications. 收起 | |
Synpol B-30 | Synpol Products PVT. Ltd | Synpol B-30 is a polyvinyl butyral resin in a clear water white-colored, free flowing, granular form. This product has a density at 25°C of 1.05-1.15 g/cm3. Synpol B-30 is most commonly used in metal, textile, paper and foil coating, thermosetting and h...展開 Synpol B-30 is a polyvinyl butyral resin in a clear water white-colored, free flowing, granular form. This product has a density at 25°C of 1.05-1.15 g/cm3. Synpol B-30 is most commonly used in metal, textile, paper and foil coating, thermosetting and hot-melt adhesive, wood finish, and printing ink applications. 收起 | |
Synpol B-60 | Synpol Products PVT. Ltd | Synpol B-60 is a polyvinyl butyral resin in a clear water white-colored, free flowing, granular form. This product has a density at 25°C of 1.05-1.15 g/cm3 and a softening point of 51-55°C. Synpol B-60 is most commonly used in metal, textile, paper and ...展開 Synpol B-60 is a polyvinyl butyral resin in a clear water white-colored, free flowing, granular form. This product has a density at 25°C of 1.05-1.15 g/cm3 and a softening point of 51-55°C. Synpol B-60 is most commonly used in metal, textile, paper and foil coating, thermosetting and hot-melt adhesive, wood finish, and printing ink applications. 收起 | |
Synpol B-722 | Synpol Products PVT. Ltd | Synpol B-722 is a thermoplastic homopolymer acrylic resin solution. This product has a density of 0.99-1.00 g/cm3 and a total non-volatile content of 48-52%. Synpol B-722 is most commonly used in acrylic lacquer, wood lacquer, ink, and PVC coating appli...展開 Synpol B-722 is a thermoplastic homopolymer acrylic resin solution. This product has a density of 0.99-1.00 g/cm3 and a total non-volatile content of 48-52%. Synpol B-722 is most commonly used in acrylic lacquer, wood lacquer, ink, and PVC coating applications. 收起 | |
Synpol B-723 | Synpol Products PVT. Ltd | Synpol B-723 is a thermoplastic homopolymer acrylic resin solution. This product has a density of 0.95-0.96 g/cm3 and a total non-volatile content of 38-42%. Synpol B-723 is most commonly used in metal, vinyl, and plastic coating, as well as aluminium l...展開 Synpol B-723 is a thermoplastic homopolymer acrylic resin solution. This product has a density of 0.95-0.96 g/cm3 and a total non-volatile content of 38-42%. Synpol B-723 is most commonly used in metal, vinyl, and plastic coating, as well as aluminium lacquer applications. 收起 | |
Synpol L-9 | Synpol Products PVT. Ltd | Synpol L-9 is a butylated phenolic formaledyde resin. This product has a density of 0.98-0.99 g/cm3 and a total non-volatile content of 58-62%. Synpol L-9 is most commonly used in etch primer, adhesive, insulating varnish, and wire enamel applications. |