ANCAMIDE® 220-X-70 Curing Agent | Evonik Operations GmbH, BL Crosslinkers | ANCAMIDE® 220-X-70 Curing Agent is one in a series of standard reactive polyamides intended for use in the curing of epoxy resins. It is ideal for use in solvent-based maintenance coatings, primers, sealers and coatings for concrete. | Request Sample |
ANCAREZ® AR555 Waterborne Epoxy Resin | Evonik Operations GmbH, BL Crosslinkers | ANCAREZ® AR555 Waterborne Epoxy Resin is a waterborne solid epoxy resin dispersion delivered at 55% solids in water. It is designed for use in two-component, ambient-cure epoxy systems. It delivers superior performance at lower cost when compared to con...展開 ANCAREZ® AR555 Waterborne Epoxy Resin is a waterborne solid epoxy resin dispersion delivered at 55% solids in water. It is designed for use in two-component, ambient-cure epoxy systems. It delivers superior performance at lower cost when compared to conventional solid resin dispersions. The unique nature of this product allows film formulation without high levels of coalescing solvent, which enables the formulation of low-odor, zero-VOC systems. 收起 | Request Sample |
EPODIL® 742 | Evonik Operations GmbH, BL Crosslinkers | An epoxy resin system modifier. | Request Sample |
EPODIL® 759 Reactive Diluent | Evonik Operations GmbH, BL Crosslinkers | EPODIL® 759 Reactive Diluent is an aliphatic glycidyl ether (C12– C13). The product is a monofunctional reactive diluent used to reduce the viscosity of epoxy resin systems. Since monofunctional diluents, in general, cause molecular weight chain terminati...展開 EPODIL® 759 Reactive Diluent is an aliphatic glycidyl ether (C12– C13). The product is a monofunctional reactive diluent used to reduce the viscosity of epoxy resin systems. Since monofunctional diluents, in general, cause molecular weight chain termination, the minimum amount necessary to achieve the desired viscosity reduction should be used. 收起 | Request Sample |
HYBRIDUR® 580 Polymer Dispersion | Evonik Operations GmbH, BL Crosslinkers | HYBRIDUR® 580 Polymer Dispersion is an acrylic-urethane hybrid polymer dispersion. Cost-effective alternative to standard polyurethane dispersions. Provides outstanding adhesion to a wide variety of substrates, superior abrasion, and chemical and stain re...展開 HYBRIDUR® 580 Polymer Dispersion is an acrylic-urethane hybrid polymer dispersion. Cost-effective alternative to standard polyurethane dispersions. Provides outstanding adhesion to a wide variety of substrates, superior abrasion, and chemical and stain resistance. 收起 | Request Sample |
IMICURE® AMI-1 Curing Agent | Evonik Operations GmbH, BL Crosslinkers | IMICURE® AMI-1 Curing Agent is a liquid, elevated-temperature curing agent for epoxy resins. It is readily compatible with both liquid and solid epoxy resins, and because it is a catalytic curing agent, it is used at low loadings of 1−5 phr. It is ideal f...展開 IMICURE® AMI-1 Curing Agent is a liquid, elevated-temperature curing agent for epoxy resins. It is readily compatible with both liquid and solid epoxy resins, and because it is a catalytic curing agent, it is used at low loadings of 1−5 phr. It is ideal for use in adhesives, pre-preg composites, and encapsulation. 收起 | Request Sample |
IMICURE® EMI-24 Curing Agent | Evonik Operations GmbH, BL Crosslinkers | IMICURE® EMI-24 Curing Agent s a liquid imidazole which functions as both a curing agent and a cure accelerator for high-performance epoxy resin systems. This unusually versatile imidazole is readily processed, and provides excellent physical properties a...展開 IMICURE® EMI-24 Curing Agent s a liquid imidazole which functions as both a curing agent and a cure accelerator for high-performance epoxy resin systems. This unusually versatile imidazole is readily processed, and provides excellent physical properties across a wide range of curing temperatures. 收起 | Request Sample |
IMICURE® Imidazole Curing Agent | Evonik Operations GmbH, BL Crosslinkers | IMICURE® Imidazole Curing Agent is an elevated-temperature curing agent for epoxy resins. It is readily compatible with both liquid and solid epoxy resins, and because it is a catalytic curing agent, it is used at low loadings of 1−5 phr. It is a good acc...展開 IMICURE® Imidazole Curing Agent is an elevated-temperature curing agent for epoxy resins. It is readily compatible with both liquid and solid epoxy resins, and because it is a catalytic curing agent, it is used at low loadings of 1−5 phr. It is a good accelerator for dicyandiamide, anhydride and phenolic curing agents. 收起 | Request Sample |
Phthalic Anhydride | Thirumalai Chemicals Ltd | Phthalic Anhydride are white flakes and an aromatic di-carboxylic acid anhydride commonly used in production of alkyd resins for paints, inks and coatings, including lacquers, pigments and varnishes. | |
Toda Color 100CR | Deqing Toda Sanfeng Pigment Co., Ltd. | Toda Color 100CR, in the form of a red powder, is an iron oxide pigment. This product has a pH value of 5-7, and can be used in coatings and inks. | |
Toda Color 100EDS | Deqing Toda Sanfeng Pigment Co., Ltd. | Toda Color 100EDS, in the form of a micronized powder, is a red iron oxide pigment. This product has a pH value of 5-7 and can be used in powder coatings and inks. | |
Toda Color 120CR | Deqing Toda Sanfeng Pigment Co., Ltd. | Toda Color 120CR, in the form of a red powder, is an iron oxide pigment. This product has a pH value of 5-7 and can be used in coatings and inks. | |
Toda Color 120EDS | Deqing Toda Sanfeng Pigment Co., Ltd. | Toda Color 120EDS, in the form of a micronized powder, is a red iron oxide pigment. This product has a pH value of 5-7 and can be used in coatings and inks. | |
Toda Color 130CR | Deqing Toda Sanfeng Pigment Co., Ltd. | Toda Color 130CR, in the form of a red powder, is an iron oxide pigment. This product has a pH value of 5-7 and can be used in coatings and inks. | |
Toda Color 130EDS | Deqing Toda Sanfeng Pigment Co., Ltd. | Toda Color 130EDS, in the form of a micronized powder, is a red iron oxide pigment. This product has a pH value of 5-7, and can be used in coatings and inks. | |
Toda Color 134CR | Deqing Toda Sanfeng Pigment Co., Ltd. | Toda Color 134CR, in the form of a red powder, is an iron oxide pigment. This product has a pH value of 5-7, and can be used in coatings and inks. | |
Toda Color 140CR | Deqing Toda Sanfeng Pigment Co., Ltd. | Toda Color 140 CR, in the form of a red powder, is an iron oxide pigment. This product has a pH value of 5-7, and can be used in coatings and inks. | |
Toda Color 140EDS | Deqing Toda Sanfeng Pigment Co., Ltd. | Toda Color 140EDS, in the form of a micronized powder, is a red iron oxide pigment. This product has a pH value of 5-7 and can be used in powder coatings and inks. | |
Toda Color 160CR | Deqing Toda Sanfeng Pigment Co., Ltd. | Toda Color 160CR, in the form of a red powder, is an iron oxide pigment. This product has a pH value of 5-7, and can be used in coatings and inks. | |
Toda Color 160EDS | Deqing Toda Sanfeng Pigment Co., Ltd. | Toda Color 160EDS, in the form of a micronized powder, is a red iron oxide pigment. This product has a pH value of 5-7 and can be used in powder coatings and inks. | |
Toda Color 180CR | Deqing Toda Sanfeng Pigment Co., Ltd. | Toda Color 180CR, in the form of a red powder, is an iron oxide pigment. This product has a pH value of 5-7, and can be used in coatings and inks. | |
Toda Color 180EDS | Deqing Toda Sanfeng Pigment Co., Ltd. | Toda Color 180EDS, in the form of a micronized powder, is a red iron oxide pigment. This product has a pH value of 5-7 and can be used in powder coatings and inks. | |
Toda Color CB-502 | Deqing Toda Sanfeng Pigment Co., Ltd. | Toda Color CB-502, in the form of a black powder, is an iron oxide pigment. This product has a pH value of 5-7.5, and can be used in coatings and inks. | |
Toda Color CB-740(A) | Deqing Toda Sanfeng Pigment Co., Ltd. | Toda Color CB-740(A), in the form of a micronized powder, is a black iron oxide pigment. This product has a pH value of 5-7.5 and can be used in powder coatings and inks. | |
Toda Color CHS-120 | Deqing Toda Sanfeng Pigment Co., Ltd. | Toda Color CHS-120, in the form of a red powder, is an iron oxide pigment. This product has a pH value of 3-5 and an oil absorption of 20-30 ml/100g, and it can be used in heat-resistant coatings and inks. | |
Toda Color CHS-120M | Deqing Toda Sanfeng Pigment Co., Ltd. | Toda Color CHS-120M, in the form of a micronized red powder, is an iron oxide pigment. This product has a pH value of 3-5 and an oil absorption of 20-30 ml/100g, and it can be used in heat-resistant coatings and inks. | |
Toda Color CHS-120MP | Deqing Toda Sanfeng Pigment Co., Ltd. | Toda Color CHS-120MP, in the form of a micronized red powder, is an iron oxide pigment. This product has a pH value of 5-7 and an oil absorption of 20-30 ml/100g, and it can be used in heat-resistant coatings and inks. | |
Toda Color CHS-125 | Deqing Toda Sanfeng Pigment Co., Ltd. | Toda Color CHS-125, in the form of a red powder, is an iron oxide pigment. This product has a pH value of 3-5 and an oil absorption of 20-30 ml/100g, and it can be used in heat-resistant coatings and inks. | |
Toda Color CHS-125M | Deqing Toda Sanfeng Pigment Co., Ltd. | Toda Color CHS-125M, in the form of a micronized red powder, is an iron oxide pigment. This product has a pH value of 3-5 and an oil absorption of 20-30 ml/100g, and it can be used in heat-resistant coatings and inks. | |
Toda Color CHS-125MP | Deqing Toda Sanfeng Pigment Co., Ltd. | Toda Color CHS-125MP, in the form of a micronized red powder, is an iron oxide pigment. This product has a pH value of 5-7 and an oil absorption of 20-30 ml/100g, and it can be used in heat-resistant coatings and inks. | |
Toda Color CHS-180 | Deqing Toda Sanfeng Pigment Co., Ltd. | Toda Color CHS-180, in the form of a red powder, is an iron oxide pigment. This product has a pH value of 3-5 and an oil absorption of 20-30 ml/100g, and it can be used in heat-resistant coatings and inks. | |
Toda Color CHS-180M | Deqing Toda Sanfeng Pigment Co., Ltd. | Toda Color CHS-180M, in the form of a micronized red powder, is an iron oxide pigment. This product has a pH value of 3-5 and an oil absorption of 20-30 ml/100g, and it can be used in heat-resistant coatings and inks. | |
Toda Color CHS-180MP | Deqing Toda Sanfeng Pigment Co., Ltd. | Toda Color CHS-180MP, in the form of a micronized red powder, is an iron oxide pigment. This product has a pH value of 5-7 and an oil absorption of 20-30 ml/100g, and it can be used in heat-resistant coatings and inks. | |
Toda Color TAN TOP-100 | Deqing Toda Sanfeng Pigment Co., Ltd. | Toda Color TAN TOP-100, in the form of a yellow powder, is an iron oxide pigment. This product has a pH value of 5-7.5 and an oil absorption of 40-50 ml/100g, and it can be used in heat-resistant coatings and inks. | |
Toda Color TSY-1 | Deqing Toda Sanfeng Pigment Co., Ltd. | Toda Color TSY-1, in the form of a micronized powder, is a yellow iron oxide pigment. This product has a pH value of 5-7 and an oil absorption of 25-35 ml/100g, and it can be used in heat-resistant coatings and inks. | |
Toda Color TSY-1H | Deqing Toda Sanfeng Pigment Co., Ltd. | Toda Color TSY-1H, in the form of a micronized powder, is a yellow iron oxide pigment. This product has a pH value of 5-7 and an oil absorption of 25-35 ml/100g, and it can be used in heat-resistant coatings and inks. | |
Toda Color TSY-2 | Deqing Toda Sanfeng Pigment Co., Ltd. | Toda Color TSY-2, in the form of a micronized powder, is a yellow iron oxide pigment. This product has a pH value of 5-7 and an oil absorption of 25-35 ml/100g, and it can be used in heat-resistant coatings and inks. | |
Toda Color TSY-2H | Deqing Toda Sanfeng Pigment Co., Ltd. | Toda Color TSY-2H, in the form of a micronized powder, is a yellow iron oxide pigment. This product has a pH value of 5-7 and an oil absorption of 25-35 ml/100g, and it can be used in heat-resistant coatings and inks. | |
Toda Color Y-50 | Deqing Toda Sanfeng Pigment Co., Ltd. | Toda Color Y-50, in the form of a yellow powder, is an iron oxide pigment. This product has a pH value of 5-7 and an oil absorption of 30-40 ml/100g, and it can be used in heat-resistant coatings and inks. | |
VESTALITE® S 101 | Evonik Operations GmbH, BL Crosslinkers | VESTALITE® S 101 is a curing agent for epoxy resin matrix designed for SMC applications. Systems using VESTALITE® S 101 have a low initial viscosity during compounding, allowing excellent fiber wetting, highfiber volume fraction and efficient process...展開 VESTALITE® S 101 is a curing agent for epoxy resin matrix designed for SMC applications. Systems using VESTALITE® S 101 have a low initial viscosity during compounding, allowing excellent fiber wetting, highfiber volume fraction and efficient processing. The high reactivity of the hardener allows fast curing inabout 4 - 5 min at 150 °. 收起 | Request Sample |
VESTALITE® S 102 | Evonik Operations GmbH, BL Crosslinkers | VESTALITE® S 102 is a curing agent for epoxy resin matrix designed for SMC applications. Systems using VESTALITE® S 102 have a low initial viscosity during compounding, allowing excellent fiber wetting, high fiber volume fraction and efficient processing....展開 VESTALITE® S 102 is a curing agent for epoxy resin matrix designed for SMC applications. Systems using VESTALITE® S 102 have a low initial viscosity during compounding, allowing excellent fiber wetting, high fiber volume fraction and efficient processing. The high reactivity of the hardener allows fast curing in about3 min at 150 °C. 收起 | Request Sample |
VESTANAT® EP-EF 201 | Evonik Operations GmbH, BL Crosslinkers | VESTANAT® EP-EF 201 is a ready catalyzed polyethoxysilane. It is used as a crosslinker or sole binder to formulate highly scratch- and chemical resistant coatings, e. g. highly scratch resistant NISO*2coatings. The crosslinker is appropriate f...展開 VESTANAT® EP-EF 201 is a ready catalyzed polyethoxysilane. It is used as a crosslinker or sole binder to formulate highly scratch- and chemical resistant coatings, e. g. highly scratch resistant NISO*2coatings. The crosslinker is appropriate for the use in "do-it-yourself" (DIY) applications. 收起 | Request Sample |
VESTANAT® EP-IPMS | Evonik Operations GmbH, BL Crosslinkers | VESTANAT® EP-IPMS is an isocyanate building block for the preparation of silane modified urethane resins. These resins may be used for the production of isocyanate-free, moisture curing adhesives, sealants and weatherable, UV- and ...展開 VESTANAT® EP-IPMS is an isocyanate building block for the preparation of silane modified urethane resins. These resins may be used for the production of isocyanate-free, moisture curing adhesives, sealants and weatherable, UV- and scratch-resistant coatings. 收起 | Request Sample |
VESTANAT® EP-M 222 X | Evonik Operations GmbH, BL Crosslinkers | VESTANAT® EP-M 222 X is a methoxysilane functional urethane crosslinker that can be used as a crosslinker to increase the flexibility of highly scratch resistant coatings, e.g. highly scratch resistant NISO*2 coatings. It is dissolved at 85 % ...展開 VESTANAT® EP-M 222 X is a methoxysilane functional urethane crosslinker that can be used as a crosslinker to increase the flexibility of highly scratch resistant coatings, e.g. highly scratch resistant NISO*2 coatings. It is dissolved at 85 % in xylene, allowing it to be used in low-VOC coatings formulation. 收起 | Request Sample |
VESTANAT® EP-M 60 | Evonik Operations GmbH, BL Crosslinkers | VESTANAT® EP-M 60 is a solvent free, polyfunctional methoxy silane. It is used as a crosslinker toformulate highly scratch resistant coatings. | Request Sample |
VESTANAT® EP-MF 203 | Evonik Operations GmbH, BL Crosslinkers | VESTANAT® EP-MF 203 is a solvent free and ready catalyzed polymethoxysilane. It is used as a crosslinker or sole binder to formulate highly scratch- and chemical resistant coating, e. g. highly scratch resistant NISO*2coatings. | Request Sample |
VESTANAT® EP-MF 204 | Evonik Operations GmbH, BL Crosslinkers | VESTANAT® EP-MF 204 is a solvent free and ready catalyzed polymethoxysilane. It is used as a crosslinker or sole binder to formulate highly scratch- and chemical resistant coating, e. g. highly scratch resistant NISO*2 coatings. | Request Sample |
VESTANAT® EP-MF 205 | Evonik Operations GmbH, BL Crosslinkers | VESTANAT® EP-MF 205 is a solvent-based, ready catalyzed polymethoxysilane. It is used as a crosslinker or sole binder to formulate extremely flexible, highly scratch- and chemical resistant coatings., e.g. highly scratch resistant NISO*2coatings. VESTA...展開 VESTANAT® EP-MF 205 is a solvent-based, ready catalyzed polymethoxysilane. It is used as a crosslinker or sole binder to formulate extremely flexible, highly scratch- and chemical resistant coatings., e.g. highly scratch resistant NISO*2coatings. VESTANAT® EP-MF 205 is particularly characterized by an optimized price/performance ratio and a harmoniously tuned mechanical property profile. 收起 | Request Sample |