| ANCAMIDE® 220-X-70 Curing Agent | Evonik Operations GmbH, BL Crosslinkers | ANCAMIDE® 220-X-70 Curing Agent is one in a series of standard reactive polyamides intended for use in the curing of epoxy resins. It is ideal for use in solvent-based maintenance coatings, primers, sealers and coatings for concrete. | Request Sample |
| ANCAREZ® AR555 Waterborne Epoxy Resin | Evonik Operations GmbH, BL Crosslinkers | ANCAREZ® AR555 Waterborne Epoxy Resin is a waterborne solid epoxy resin dispersion delivered at 55% solids in water. It is designed for use in two-component, ambient-cure epoxy systems. It delivers superior performance at lower cost when compared to con...展開 ANCAREZ® AR555 Waterborne Epoxy Resin is a waterborne solid epoxy resin dispersion delivered at 55% solids in water. It is designed for use in two-component, ambient-cure epoxy systems. It delivers superior performance at lower cost when compared to conventional solid resin dispersions. The unique nature of this product allows film formulation without high levels of coalescing solvent, which enables the formulation of low-odor, zero-VOC systems. 收起 | Request Sample |
| BP®-183 | Zhejiang Huate New Material Co., Ltd. | BP®-183 is a solvent based organoclay additive with rheological properties that appears as a light yellow, free flowing powder. This product provides desirable compatibility and thickening abilities in low and middle polar solvent systems. It is also comm...展開 BP®-183 is a solvent based organoclay additive with rheological properties that appears as a light yellow, free flowing powder. This product provides desirable compatibility and thickening abilities in low and middle polar solvent systems. It is also commonly used in mixed paints, paint fillers, sealants, and printing inks. 收起 | |
| BP®-183B | Zhejiang Huate New Material Co., Ltd. | BP®-183B is a solvent based organoclay additive with rheological properties that appears as a light yellow, free flowing powder. This product provides desirable compatibility and thickening abilities in low, middle and high polar solvent systems. It is al...展開 BP®-183B is a solvent based organoclay additive with rheological properties that appears as a light yellow, free flowing powder. This product provides desirable compatibility and thickening abilities in low, middle and high polar solvent systems. It is also commonly used in mixed paints, bitumen paints, chlorinated rubber paints, anticorrosion paints, epoxy paints, sealants, and printing inks. 收起 | |
| BP®-184 | Zhejiang Huate New Material Co., Ltd. | BP®-184 is a solvent based organoclay additive with rheological properties that appears as a white, free flowing powder in appearance. This product is easy to disperse, and is commonly used in sealants, high-grade paints, and printing inks. | |
| BP®-186 | Zhejiang Huate New Material Co., Ltd. | BP®-186 is a solvent based organoclay additive with rheological properties. This product is applicable to low and middle polar solvent systems and appears as a white, free flowing powder. It is also commonly used in sealants, transparent paints, and print...展開 BP®-186 is a solvent based organoclay additive with rheological properties. This product is applicable to low and middle polar solvent systems and appears as a white, free flowing powder. It is also commonly used in sealants, transparent paints, and printing inks. 收起 | |
| BP®-186B | Zhejiang Huate New Material Co., Ltd. | BP®-186B is a solvent based organoclay additive with rheological properties. This product is applicable to low and middle polar solvent systems and appears as a white, free flowing powder. It is also commonly used in sealants, transparent paints, and prin...展開 BP®-186B is a solvent based organoclay additive with rheological properties. This product is applicable to low and middle polar solvent systems and appears as a white, free flowing powder. It is also commonly used in sealants, transparent paints, and printing inks. 收起 | |
| BP®-186C | Zhejiang Huate New Material Co., Ltd. | BP®-186C is a solvent based organoclay additive with rheological properties. This product is applicable to low and middle polar solvent systems, and appears as a light yellow, free flowing powder. It is also commonly used in sealants, furniture paints, an...展開 BP®-186C is a solvent based organoclay additive with rheological properties. This product is applicable to low and middle polar solvent systems, and appears as a light yellow, free flowing powder. It is also commonly used in sealants, furniture paints, and printing inks. 收起 | |
| BP®-186D | Zhejiang Huate New Material Co., Ltd. | BP®-186D is a solvent based organoclay additive with rheological properties. This product is applicable to low and middle polar solvent systems, and appears as a white, free flowing powder. It is commonly used in sealants, superior paints, and printing in...展開 BP®-186D is a solvent based organoclay additive with rheological properties. This product is applicable to low and middle polar solvent systems, and appears as a white, free flowing powder. It is commonly used in sealants, superior paints, and printing inks. 收起 | |
| BP®-188L | Zhejiang Huate New Material Co., Ltd. | BP®-188L is a water-based bentonite rheological additive created from specially processed high purity hydrophilic montmorillonite. This product has high heat resistance and bio-stability in addition to thixotropic properties, and appears as a light white,...展開 BP®-188L is a water-based bentonite rheological additive created from specially processed high purity hydrophilic montmorillonite. This product has high heat resistance and bio-stability in addition to thixotropic properties, and appears as a light white, free-flowing powder. It is commonly used in water-based ink, water-based coatings, and emulsion paints. 收起 | |
| BP®-283 | Zhejiang Huate New Material Co., Ltd. | BP®-283 is a tetraallkyl ammonium bentonite based organoclay used in solvent-based systems of low to medium polarity. This product is also used as an anti-sagging agent in inks and adhesives. | |
| BP®-286 | Zhejiang Huate New Material Co., Ltd. | BP®-286 is a solvent based organoclay with rheological properties. This product appears as a white, free flowing powder, and provides strong thickening capabilities in addition to high transparency. It is commonly used in superior paints and printing inks...展開 BP®-286 is a solvent based organoclay with rheological properties. This product appears as a white, free flowing powder, and provides strong thickening capabilities in addition to high transparency. It is commonly used in superior paints and printing inks. 收起 | |
| BP®-500 | Zhejiang Huate New Material Co., Ltd. | BP®-500 is a solvent based organoclay with rheological properties. This product is used to dissolve solvents and increase viscosity and thixotropy in resin systems. It provides a light color and high transparency in addition to colloid fineness, and is co...展開 BP®-500 is a solvent based organoclay with rheological properties. This product is used to dissolve solvents and increase viscosity and thixotropy in resin systems. It provides a light color and high transparency in addition to colloid fineness, and is commonly applied in paints, coatings, inks, and adhesives. 收起 | |
| BP®-923 | Zhejiang Huate New Material Co., Ltd. | BP®-923 is a solvent based organoclay with rheological properties that is applied in low, middle and high polar solvent systems. This product provides anti-flowing and thixotropic effects in addition to high dispersion. It is applicable to epoxy paints, a...展開 BP®-923 is a solvent based organoclay with rheological properties that is applied in low, middle and high polar solvent systems. This product provides anti-flowing and thixotropic effects in addition to high dispersion. It is applicable to epoxy paints, anti-corrosion paints, and inks. 收起 | |
| EPODIL® 742 | Evonik Operations GmbH, BL Crosslinkers | An epoxy resin system modifier. | Request Sample |
| EPODIL® 759 Reactive Diluent | Evonik Operations GmbH, BL Crosslinkers | EPODIL® 759 Reactive Diluent is an aliphatic glycidyl ether (C12– C13). The product is a monofunctional reactive diluent used to reduce the viscosity of epoxy resin systems. Since monofunctional diluents, in general, cause molecular weight chain terminati...展開 EPODIL® 759 Reactive Diluent is an aliphatic glycidyl ether (C12– C13). The product is a monofunctional reactive diluent used to reduce the viscosity of epoxy resin systems. Since monofunctional diluents, in general, cause molecular weight chain termination, the minimum amount necessary to achieve the desired viscosity reduction should be used. 收起 | Request Sample |
| HYBRIDUR® 580 Polymer Dispersion | Evonik Operations GmbH, BL Crosslinkers | HYBRIDUR® 580 Polymer Dispersion is an acrylic-urethane hybrid polymer dispersion. Cost-effective alternative to standard polyurethane dispersions. Provides outstanding adhesion to a wide variety of substrates, superior abrasion, and chemical and stain re...展開 HYBRIDUR® 580 Polymer Dispersion is an acrylic-urethane hybrid polymer dispersion. Cost-effective alternative to standard polyurethane dispersions. Provides outstanding adhesion to a wide variety of substrates, superior abrasion, and chemical and stain resistance. 收起 | Request Sample |
| IMICURE® AMI-1 Curing Agent | Evonik Operations GmbH, BL Crosslinkers | IMICURE® AMI-1 Curing Agent is a liquid, elevated-temperature curing agent for epoxy resins. It is readily compatible with both liquid and solid epoxy resins, and because it is a catalytic curing agent, it is used at low loadings of 1−5 phr. It is ideal f...展開 IMICURE® AMI-1 Curing Agent is a liquid, elevated-temperature curing agent for epoxy resins. It is readily compatible with both liquid and solid epoxy resins, and because it is a catalytic curing agent, it is used at low loadings of 1−5 phr. It is ideal for use in adhesives, pre-preg composites, and encapsulation. 收起 | Request Sample |
| IMICURE® EMI-24 Curing Agent | Evonik Operations GmbH, BL Crosslinkers | IMICURE® EMI-24 Curing Agent s a liquid imidazole which functions as both a curing agent and a cure accelerator for high-performance epoxy resin systems. This unusually versatile imidazole is readily processed, and provides excellent physical properties a...展開 IMICURE® EMI-24 Curing Agent s a liquid imidazole which functions as both a curing agent and a cure accelerator for high-performance epoxy resin systems. This unusually versatile imidazole is readily processed, and provides excellent physical properties across a wide range of curing temperatures. 收起 | Request Sample |
| IMICURE® Imidazole Curing Agent | Evonik Operations GmbH, BL Crosslinkers | IMICURE® Imidazole Curing Agent is an elevated-temperature curing agent for epoxy resins. It is readily compatible with both liquid and solid epoxy resins, and because it is a catalytic curing agent, it is used at low loadings of 1−5 phr. It is a good acc...展開 IMICURE® Imidazole Curing Agent is an elevated-temperature curing agent for epoxy resins. It is readily compatible with both liquid and solid epoxy resins, and because it is a catalytic curing agent, it is used at low loadings of 1−5 phr. It is a good accelerator for dicyandiamide, anhydride and phenolic curing agents. 收起 | Request Sample |
| Iron Oxide Blue | Tongling Rely Technology Co., Ltd. | Iron Oxide Blue is a dark and light blue pigment powder that has an oil absorption of 15-30% and a moisture content of 1%. This product is used for strong and bright coloring in paint and ink applications. | |
| Iron Oxide Yellow | Tongling Rely Technology Co., Ltd. | Iron Oxide Yellow is an iron oxide pigment of relatively stable chemical properties of alkaline oxides. This product provides a pure and bright yellow color of iron with good weather resistance and hiding power. It is commonly used in ink applications. | |
| VESTALITE® S 101 | Evonik Operations GmbH, BL Crosslinkers | VESTALITE® S 101 is a curing agent for epoxy resin matrix designed for SMC applications. Systems using VESTALITE® S 101 have a low initial viscosity during compounding, allowing excellent fiber wetting, highfiber volume fraction and efficient process...展開 VESTALITE® S 101 is a curing agent for epoxy resin matrix designed for SMC applications. Systems using VESTALITE® S 101 have a low initial viscosity during compounding, allowing excellent fiber wetting, highfiber volume fraction and efficient processing. The high reactivity of the hardener allows fast curing inabout 4 - 5 min at 150 °. 收起 | Request Sample |
| VESTALITE® S 102 | Evonik Operations GmbH, BL Crosslinkers | VESTALITE® S 102 is a curing agent for epoxy resin matrix designed for SMC applications. Systems using VESTALITE® S 102 have a low initial viscosity during compounding, allowing excellent fiber wetting, high fiber volume fraction and efficient processing....展開 VESTALITE® S 102 is a curing agent for epoxy resin matrix designed for SMC applications. Systems using VESTALITE® S 102 have a low initial viscosity during compounding, allowing excellent fiber wetting, high fiber volume fraction and efficient processing. The high reactivity of the hardener allows fast curing in about3 min at 150 °C. 收起 | Request Sample |
| VESTANAT® EP-EF 201 | Evonik Operations GmbH, BL Crosslinkers | VESTANAT® EP-EF 201 is a ready catalyzed polyethoxysilane. It is used as a crosslinker or sole binder to formulate highly scratch- and chemical resistant coatings, e. g. highly scratch resistant NISO*2coatings. The crosslinker is appropriate f...展開 VESTANAT® EP-EF 201 is a ready catalyzed polyethoxysilane. It is used as a crosslinker or sole binder to formulate highly scratch- and chemical resistant coatings, e. g. highly scratch resistant NISO*2coatings. The crosslinker is appropriate for the use in "do-it-yourself" (DIY) applications. 收起 | Request Sample |
| VESTANAT® EP-IPMS | Evonik Operations GmbH, BL Crosslinkers | VESTANAT® EP-IPMS is an isocyanate building block for the preparation of silane modified urethane resins. These resins may be used for the production of isocyanate-free, moisture curing adhesives, sealants and weatherable, UV- and ...展開 VESTANAT® EP-IPMS is an isocyanate building block for the preparation of silane modified urethane resins. These resins may be used for the production of isocyanate-free, moisture curing adhesives, sealants and weatherable, UV- and scratch-resistant coatings. 收起 | Request Sample |
| VESTANAT® EP-M 222 X | Evonik Operations GmbH, BL Crosslinkers | VESTANAT® EP-M 222 X is a methoxysilane functional urethane crosslinker that can be used as a crosslinker to increase the flexibility of highly scratch resistant coatings, e.g. highly scratch resistant NISO*2 coatings. It is dissolved at 85 % ...展開 VESTANAT® EP-M 222 X is a methoxysilane functional urethane crosslinker that can be used as a crosslinker to increase the flexibility of highly scratch resistant coatings, e.g. highly scratch resistant NISO*2 coatings. It is dissolved at 85 % in xylene, allowing it to be used in low-VOC coatings formulation. 收起 | Request Sample |
| VESTANAT® EP-M 60 | Evonik Operations GmbH, BL Crosslinkers | VESTANAT® EP-M 60 is a solvent free, polyfunctional methoxy silane. It is used as a crosslinker toformulate highly scratch resistant coatings. | Request Sample |
| VESTANAT® EP-MF 203 | Evonik Operations GmbH, BL Crosslinkers | VESTANAT® EP-MF 203 is a solvent free and ready catalyzed polymethoxysilane. It is used as a crosslinker or sole binder to formulate highly scratch- and chemical resistant coating, e. g. highly scratch resistant NISO*2coatings. | Request Sample |
| VESTANAT® EP-MF 204 | Evonik Operations GmbH, BL Crosslinkers | VESTANAT® EP-MF 204 is a solvent free and ready catalyzed polymethoxysilane. It is used as a crosslinker or sole binder to formulate highly scratch- and chemical resistant coating, e. g. highly scratch resistant NISO*2 coatings. | Request Sample |
| VESTANAT® EP-MF 205 | Evonik Operations GmbH, BL Crosslinkers | VESTANAT® EP-MF 205 is a solvent-based, ready catalyzed polymethoxysilane. It is used as a crosslinker or sole binder to formulate extremely flexible, highly scratch- and chemical resistant coatings., e.g. highly scratch resistant NISO*2coatings. VESTA...展開 VESTANAT® EP-MF 205 is a solvent-based, ready catalyzed polymethoxysilane. It is used as a crosslinker or sole binder to formulate extremely flexible, highly scratch- and chemical resistant coatings., e.g. highly scratch resistant NISO*2coatings. VESTANAT® EP-MF 205 is particularly characterized by an optimized price/performance ratio and a harmoniously tuned mechanical property profile. 收起 | Request Sample |
