Diethylene Glycol (DEG) | Qingdao Yuanhang Chemicals Co., Ltd | Diethylene Glycol (DEG) is a clear liquid that can be used as a solvent for lacquer, paint and varnish, coupling printing inks, and water-based coating. | |
EXOCOAT™ AM | Axcentive Sarl | EXOCOAT® AM by Axcentive is a water-based, doped nano-titanium oxide sol with a strong antimicrobial effect and anatase structure. It prevents the build-up of microbes as the photocatalytic effect results in effective radical formation which breaks down v...展開 EXOCOAT® AM by Axcentive is a water-based, doped nano-titanium oxide sol with a strong antimicrobial effect and anatase structure. It prevents the build-up of microbes as the photocatalytic effect results in effective radical formation which breaks down viruses and bacteria. It eradicates viruses such as influenza, SARS-COV-2, dengue & hepatitis and bacteria such as E. coli, MSRA, streptococcus, listeria, pneumonia, and salmonella. It is activated by light and displays quick drying at room temperature. Spray application is recommended to reach thin monolayers. It exhibits curing at room temperature up to 300°C and super hard particles (1GPa Vickers). It is easy to apply & durable, allowing longer disinfection intervals while preserving hygiene level. It shows non-silver leaching, efficacious even under low light conditions, lower service frequency, and no need for frequent disinfection routine. It is used in the state-of-the-art continuous antimicrobial coating for high-traffic areas. EXOCOAT® AM is suitable for topcoats for any surface inside buildings, stores, hospitals, and vehicles. The shelf life of this product is 9 months. 收起 | |
Ketjenflex® 12 | Axcentive Sarl | Ketjenflex® 12 is a citrate based clear liquid. It is used as a partially bio-based plasticizer for inks, adhesives, and coatings. Ketjenflex® 12 can be used in vinyl formulations such as PVC plastics, vinyl flooring, solution vinyl resins, wood vinyl com...展開 Ketjenflex® 12 is a citrate based clear liquid. It is used as a partially bio-based plasticizer for inks, adhesives, and coatings. Ketjenflex® 12 can be used in vinyl formulations such as PVC plastics, vinyl flooring, solution vinyl resins, wood vinyl compounds, and PVC based plastisols. It can also be used in PVC based polymers, nitrocellulose resins, and cyanoacrylate adhesives. 收起 | |
Ketjenflex® 6 | Axcentive Sarl | Ketjenflex® 6 is a toluene sulfonamide in the form of a white crystalline powder. It is used as a plasticizer in inks, adhesives, and coatings. Ketjenflex® 6 can be used with resins such as nitrocellulose, polyamide, PVAC, rosin, epoxy, and more. | |
Ketjenflex® 8 | Axcentive Sarl | Ketjenflex® 8 is a toluene sulfonamide in the form of a clear, slightly yellow liquid. It is used as a plasticizer and adhesion promoter in inks, adhesives, and coatings. Ketjenflex® 8 can be used with applications such as PVAC, nitrocellulose, powder coa...展開 Ketjenflex® 8 is a toluene sulfonamide in the form of a clear, slightly yellow liquid. It is used as a plasticizer and adhesion promoter in inks, adhesives, and coatings. Ketjenflex® 8 can be used with applications such as PVAC, nitrocellulose, powder coatings, synthetic polyamides, epoxy coatings and adhesives, and more. 收起 | |
Ketjenflex® CP | Axcentive Sarl | Ketjenflex® CP is a para toluene sulfonic acid in the form of a white crystalline powder. It is used as a strong protonating catalyst. Ketjenflex® CP can be used in acid cured wood coatings. | |
Ketjenflex® MH | Axcentive Sarl | Ketjenflex® MH is a toluene sulfonamide in the form of a hard, transparent resin. It is used at a plasticizing co-resin in coatings, adhesives, and inks. Ketjenflex® MH can be used in nitrocellulose coatings, epoxy based coatings and adhesives, and printi...展開 Ketjenflex® MH is a toluene sulfonamide in the form of a hard, transparent resin. It is used at a plasticizing co-resin in coatings, adhesives, and inks. Ketjenflex® MH can be used in nitrocellulose coatings, epoxy based coatings and adhesives, and printing inks. 收起 | |
Ketjenflex® MS 80 | Axcentive Sarl | Ketjenflex® MS 80 is a toluene sulfonamide in the form of a transparent liquid. it is used as a plasticizing co-resin in butyl acetate for coatings, adhesives, and inks. Ketjenflex® MS 80 is the liquid version of Ketjenflex® MH and can easily be poured in...展開 Ketjenflex® MS 80 is a toluene sulfonamide in the form of a transparent liquid. it is used as a plasticizing co-resin in butyl acetate for coatings, adhesives, and inks. Ketjenflex® MS 80 is the liquid version of Ketjenflex® MH and can easily be poured into desired formulations. It has applications in nitrocellulose coatings, cellulose acetate formulations, and printing inks. 收起 | |
Mono Ethylene Glycol (MEG) | Qingdao Yuanhang Chemicals Co., Ltd | Mono Ethylene Glycol (MEG) is a clear, moderately viscous, hydroscopic liquid that can be used for solvent properties in custom formulations of paints, dyes, inks and other blended products. | |
Monoflat 10P-A | HS CHEM CO.,LTD | Monoflat 10P-A is a dispersion of polyethylene wax in toluene to impart a smooth matted effect to the surface finish. This product also provides excellent mar proofing effect, anti-blocking, and slip enhancing properties for all types of coatings. It is o...展開 Monoflat 10P-A is a dispersion of polyethylene wax in toluene to impart a smooth matted effect to the surface finish. This product also provides excellent mar proofing effect, anti-blocking, and slip enhancing properties for all types of coatings. It is often used in U.V paint, plastic paint, lacquer paint, polyurethane paint, and gravure ink. 收起 | |
Monoflat 10P-S | HS CHEM CO.,LTD | Monoflat 10P-S is a dispersion of polyethylene wax in toluene to impart a smooth matted effect to the surface finish. This product also provides excellent mar proofing effect, anti-blocking, and slip enhancing properties for all types of coatings. It is o...展開 Monoflat 10P-S is a dispersion of polyethylene wax in toluene to impart a smooth matted effect to the surface finish. This product also provides excellent mar proofing effect, anti-blocking, and slip enhancing properties for all types of coatings. It is often used in U.V paint, plastic paint, lacquer paint, polyurethane paint, and gravure ink. 收起 | |
MONORAL® 619 | HS CHEM CO.,LTD | MONORAL® 619 is a low molecular weight polyethylene dispersed in toluene to impart abrasion resistance to the surface finish and provide mar resistance and slip enhancing properties for both plastic and wood coatings. This product is also used in gravure ...展開 MONORAL® 619 is a low molecular weight polyethylene dispersed in toluene to impart abrasion resistance to the surface finish and provide mar resistance and slip enhancing properties for both plastic and wood coatings. This product is also used in gravure ink and urethane paint applications. 收起 | |
MONORAL® 725 | HS CHEM CO.,LTD | MONORAL® 725 is a dispersion of low molecular weight polyethylene in toluene designed to impart abrasion and mar resistance and slip enhancing properties to the surface finish. This product is often used in gravure ink applications. | |
MONORAL® 8500 | HS CHEM CO.,LTD | MONORAL® 8500 is an organically modified derivative of castor oil that comes in the form of a white powder. This product is used in adhesives, inks, decorative coatings, varnishes, epoxies, aliphatic and aromatic solvent borne coatings, powder coatings, t...展開 MONORAL® 8500 is an organically modified derivative of castor oil that comes in the form of a white powder. This product is used in adhesives, inks, decorative coatings, varnishes, epoxies, aliphatic and aromatic solvent borne coatings, powder coatings, traffic paint, and solvent free coatings. 收起 | |
Sodium Lauryl Ethere Sulfate (SLES) | Qingdao Yuanhang Chemicals Co., Ltd | Sodium Lauryl Ethere Sulfate (SLES) is a white or yellowish paste that is an anionic surfactant and a foaming and degreasing agent that can be applied to printing. |