| Cinergi™ 2091 A | Lawter | Cinergi™ 2091 A is a grinding and flushing vehicle that has been created to wet-out high pigment loads and to achieve maximum color development. It has good pigment wetting properties and shows press stability, high gloss, good transfer and leveling as we...展開 Cinergi™ 2091 A is a grinding and flushing vehicle that has been created to wet-out high pigment loads and to achieve maximum color development. It has good pigment wetting properties and shows press stability, high gloss, good transfer and leveling as well as fast set speeds. Cinergi™ 2091 A is used in sheet-fed and letterpress inks. 收起 | |
| EXOCOAT™ AM | Axcentive Sarl | EXOCOAT® AM by Axcentive is a water-based, doped nano-titanium oxide sol with a strong antimicrobial effect and anatase structure. It prevents the build-up of microbes as the photocatalytic effect results in effective radical formation which breaks down v...展開 EXOCOAT® AM by Axcentive is a water-based, doped nano-titanium oxide sol with a strong antimicrobial effect and anatase structure. It prevents the build-up of microbes as the photocatalytic effect results in effective radical formation which breaks down viruses and bacteria. It eradicates viruses such as influenza, SARS-COV-2, dengue & hepatitis and bacteria such as E. coli, MSRA, streptococcus, listeria, pneumonia, and salmonella. It is activated by light and displays quick drying at room temperature. Spray application is recommended to reach thin monolayers. It exhibits curing at room temperature up to 300°C and super hard particles (1GPa Vickers). It is easy to apply & durable, allowing longer disinfection intervals while preserving hygiene level. It shows non-silver leaching, efficacious even under low light conditions, lower service frequency, and no need for frequent disinfection routine. It is used in the state-of-the-art continuous antimicrobial coating for high-traffic areas. EXOCOAT® AM is suitable for topcoats for any surface inside buildings, stores, hospitals, and vehicles. The shelf life of this product is 9 months. 收起 | |
| Ketjenflex® 12 | Axcentive Sarl | Ketjenflex® 12 is a citrate based clear liquid. It is used as a partially bio-based plasticizer for inks, adhesives, and coatings. Ketjenflex® 12 can be used in vinyl formulations such as PVC plastics, vinyl flooring, solution vinyl resins, wood vinyl com...展開 Ketjenflex® 12 is a citrate based clear liquid. It is used as a partially bio-based plasticizer for inks, adhesives, and coatings. Ketjenflex® 12 can be used in vinyl formulations such as PVC plastics, vinyl flooring, solution vinyl resins, wood vinyl compounds, and PVC based plastisols. It can also be used in PVC based polymers, nitrocellulose resins, and cyanoacrylate adhesives. 收起 | |
| Ketjenflex® 6 | Axcentive Sarl | Ketjenflex® 6 is a toluene sulfonamide in the form of a white crystalline powder. It is used as a plasticizer in inks, adhesives, and coatings. Ketjenflex® 6 can be used with resins such as nitrocellulose, polyamide, PVAC, rosin, epoxy, and more. | |
| Ketjenflex® 8 | Axcentive Sarl | Ketjenflex® 8 is a toluene sulfonamide in the form of a clear, slightly yellow liquid. It is used as a plasticizer and adhesion promoter in inks, adhesives, and coatings. Ketjenflex® 8 can be used with applications such as PVAC, nitrocellulose, powder coa...展開 Ketjenflex® 8 is a toluene sulfonamide in the form of a clear, slightly yellow liquid. It is used as a plasticizer and adhesion promoter in inks, adhesives, and coatings. Ketjenflex® 8 can be used with applications such as PVAC, nitrocellulose, powder coatings, synthetic polyamides, epoxy coatings and adhesives, and more. 收起 | |
| Ketjenflex® CP | Axcentive Sarl | Ketjenflex® CP is a para toluene sulfonic acid in the form of a white crystalline powder. It is used as a strong protonating catalyst. Ketjenflex® CP can be used in acid cured wood coatings. | |
| Ketjenflex® MH | Axcentive Sarl | Ketjenflex® MH is a toluene sulfonamide in the form of a hard, transparent resin. It is used at a plasticizing co-resin in coatings, adhesives, and inks. Ketjenflex® MH can be used in nitrocellulose coatings, epoxy based coatings and adhesives, and printi...展開 Ketjenflex® MH is a toluene sulfonamide in the form of a hard, transparent resin. It is used at a plasticizing co-resin in coatings, adhesives, and inks. Ketjenflex® MH can be used in nitrocellulose coatings, epoxy based coatings and adhesives, and printing inks. 收起 | |
| Ketjenflex® MS 80 | Axcentive Sarl | Ketjenflex® MS 80 is a toluene sulfonamide in the form of a transparent liquid. it is used as a plasticizing co-resin in butyl acetate for coatings, adhesives, and inks. Ketjenflex® MS 80 is the liquid version of Ketjenflex® MH and can easily be poured in...展開 Ketjenflex® MS 80 is a toluene sulfonamide in the form of a transparent liquid. it is used as a plasticizing co-resin in butyl acetate for coatings, adhesives, and inks. Ketjenflex® MS 80 is the liquid version of Ketjenflex® MH and can easily be poured into desired formulations. It has applications in nitrocellulose coatings, cellulose acetate formulations, and printing inks. 收起 | |
| Miraglaze™ 8614 A | Lawter | Miraglaze™ 8614 A is a workhorse sheet-fed overprint varnish made for good tack stability and maximum hardness. It comes as a dry-trapped or wet product that is ideal for commercial and folding carton applications. The product has a high gloss finish with...展開 Miraglaze™ 8614 A is a workhorse sheet-fed overprint varnish made for good tack stability and maximum hardness. It comes as a dry-trapped or wet product that is ideal for commercial and folding carton applications. The product has a high gloss finish with minimal yellow and good rub characteristics. It also has ink driers and wax to enhance the formation of necessary print properties, making it suitable for use in overprints and wet or dry trapped applications. 收起 | |
| Optilith™ 1486 A | Lawter | Optilith™ 1486 A is an anti-oxidant additive with a low viscosity solution that acts to minimize the effect on drying time, while maximizing the "stay open" time. It also has anti-skinning properties and is pumpable for easy transfer and dispersion. Optil...展開 Optilith™ 1486 A is an anti-oxidant additive with a low viscosity solution that acts to minimize the effect on drying time, while maximizing the "stay open" time. It also has anti-skinning properties and is pumpable for easy transfer and dispersion. Optilith™ 1486 A is recommended for use in heatset offset and sheet-fed offset inks. 收起 | |
| Optilith™ 4 A | Lawter | Optilith™ 4 A is a water-fighting additive that has a low volatile and high solids lubricating compound. It is able to reduce water pick-up in lithographic inks and is functional across a variety of fountain solutions. Optilith™ 4 A is ideally suited for ...展開 Optilith™ 4 A is a water-fighting additive that has a low volatile and high solids lubricating compound. It is able to reduce water pick-up in lithographic inks and is functional across a variety of fountain solutions. Optilith™ 4 A is ideally suited for use in heatset and sheet-fed offset inks and in flushing vehicles. 收起 | |
| Polysperse™ | Lawter | Polysperse™ is a micronized wax powder that provides good slip as well as good rub resistance and comes recommended for use in sheet-fed, heatset and liquid inks. | |
| Polysperse™ 735 | Lawter | Polysperse™ 735 is a micronized wax powder that displays good rub resistance and is recommended for use in sheet-fed, heatset and liquid inks. | |
| Polysperse™ A | Lawter | Polysperse™ A is a micronized synthetic wax with a narrow distribution of particles and spherical morphology that allows for an easier uniformity and dispersion during processing. It shows good surface slip and smoothness, low surface tension, rub resista...展開 Polysperse™ A is a micronized synthetic wax with a narrow distribution of particles and spherical morphology that allows for an easier uniformity and dispersion during processing. It shows good surface slip and smoothness, low surface tension, rub resistance and gloss. Polysperse™ A is suitable for use in flexographic and gravure inks, heatset and sheet-fed inks and in UV and metal decorating inks. 收起 | |
| Polysperse™ HPC | Lawter | Polysperse™ HPC is a micronized wax powder that displays good rub resistance, has good slip properties and a high melting point. It is recommended for use in sheet-fed, heatset and liquid inks. | |
| Polysperse™ W2F | Lawter | Polysperse™ W2F is a micronized wax with 98% solids and provides good slip and rub resistance and finds uses in flexo, gravure and digital printing inks. | |
| Stirinol™ 97 A | Lawter | Stirinol™ 97 A is a heatset wax compound to give good rub and slip in heatset inks. It is easily dispersed, retains gloss and has good re-crystallization resistance. It also had minimal effect on rheology and is ideally suited for use in heatset offset in...展開 Stirinol™ 97 A is a heatset wax compound to give good rub and slip in heatset inks. It is easily dispersed, retains gloss and has good re-crystallization resistance. It also had minimal effect on rheology and is ideally suited for use in heatset offset inks and hot foil stamping applications. 收起 | |
| Uroset™ 100SC | Lawter | Uroset™ 100SC is a dispersion varnish with a low viscosity that was created as a universal base for any letterpress oil ink formulations or offsets. Uroset™ 100SC carries high pigment concentrations, providing good gloss as well as good pigment wetting an...展開 Uroset™ 100SC is a dispersion varnish with a low viscosity that was created as a universal base for any letterpress oil ink formulations or offsets. Uroset™ 100SC carries high pigment concentrations, providing good gloss as well as good pigment wetting and litho properties. Apart from offsets and letterpress inks, it is also suitable for use in metal deco inks. 收起 | |
| Uroset™ 2055C | Lawter | Uroset™ 2055C is a wetting varnish for offset printing that is formulated from alkali blue and is considered to have good flow properties. It has a soya bean oil base with 75% non-volatile composition. Uroset™ 2055C is recommended for use in sheet-fed ink...展開 Uroset™ 2055C is a wetting varnish for offset printing that is formulated from alkali blue and is considered to have good flow properties. It has a soya bean oil base with 75% non-volatile composition. Uroset™ 2055C is recommended for use in sheet-fed inks. 收起 | |
| Uroset™ 8802 C | Lawter | Uroset™ 8802 C is a pigment dispersion varnish that is 80% non-volatile and is based on vegetable oils, mineral distillates and modified rosin-based resins. It is used in pigment concentrates and combines fast setting benefits with high gloss, while maint...展開 Uroset™ 8802 C is a pigment dispersion varnish that is 80% non-volatile and is based on vegetable oils, mineral distillates and modified rosin-based resins. It is used in pigment concentrates and combines fast setting benefits with high gloss, while maintaining good water balance and good rheological and press stability. Uroset™ 8802 C is suited for use as a single varnish for all sheet-fed inks and gloss offsets. 收起 | |
| Uroset™ 8825 C | Lawter | Uroset™ 8825 C is a 100% non-volatile pigment dispersion varnish from vegetable oils, ester solvents and phenolic-modified rosin-based resins. It displays good pigment wetting properties and combines fast setting benefits with high gloss. Uroset™ 8825 C c...展開 Uroset™ 8825 C is a 100% non-volatile pigment dispersion varnish from vegetable oils, ester solvents and phenolic-modified rosin-based resins. It displays good pigment wetting properties and combines fast setting benefits with high gloss. Uroset™ 8825 C can be used as a single varnish for all sheet-fed inks and gloss offsets. 收起 | |
| Uroset™ 8850C | Lawter | Uroset™ 8850C is a wetting varnish with a soya bean oil base that provides good pigment wetting properties and also offers a combination of fast setting and high gloss features. Uroset™ 8850C shows good rheological behavior and water balance as well as p...展開 Uroset™ 8850C is a wetting varnish with a soya bean oil base that provides good pigment wetting properties and also offers a combination of fast setting and high gloss features. Uroset™ 8850C shows good rheological behavior and water balance as well as press stability. It is suitable for use in pigment dispersions and concentrates, in offset inks and in gloss offset, quickset and sheet-fed applications. 收起 | |
| Uroset™ FGVC | Lawter | Uroset™ FGVC is a quickset dispersion varnish with good pigment wetting properties that can create ground or flushed color bases with stable and easily-handled bodies. It has high pigment loading ability, is fast setting and has good litho properties. Uro...展開 Uroset™ FGVC is a quickset dispersion varnish with good pigment wetting properties that can create ground or flushed color bases with stable and easily-handled bodies. It has high pigment loading ability, is fast setting and has good litho properties. Uroset™ FGVC is durable and has applications in offset inks, flush and pigment concentrates. 收起 | |
| Webvar™ 1126 | Lawter | Webvar™ 1126 is a heatset gel varnish displaying good transfer and lithographic performance, along with high gloss at all press speeds. It also has low misting and good water balance properties and is considered ideal for use in heatset inks. | |
| Webvar™ 1127 | Lawter | Webvar™ 1127 is a heatset free-flow varnish which displays good flow, water balance and high gloss features, along with low misting and fast setting properties. It is considered a varnish that is ideal for adjusting the rheology in the ink to create bette...展開 Webvar™ 1127 is a heatset free-flow varnish which displays good flow, water balance and high gloss features, along with low misting and fast setting properties. It is considered a varnish that is ideal for adjusting the rheology in the ink to create better gloss and transfer. Webvar™ 1127 is used in heatset inks and wetting varnishes. 收起 |
