| ANCAMIDE® 220-X-70 Curing Agent | Evonik Operations GmbH, BL Crosslinkers | ANCAMIDE® 220-X-70 Curing Agent is one in a series of standard reactive polyamides intended for use in the curing of epoxy resins. It is ideal for use in solvent-based maintenance coatings, primers, sealers and coatings for concrete. | Request Sample |
| ANCAREZ® AR555 Waterborne Epoxy Resin | Evonik Operations GmbH, BL Crosslinkers | ANCAREZ® AR555 Waterborne Epoxy Resin is a waterborne solid epoxy resin dispersion delivered at 55% solids in water. It is designed for use in two-component, ambient-cure epoxy systems. It delivers superior performance at lower cost when compared to con...展開 ANCAREZ® AR555 Waterborne Epoxy Resin is a waterborne solid epoxy resin dispersion delivered at 55% solids in water. It is designed for use in two-component, ambient-cure epoxy systems. It delivers superior performance at lower cost when compared to conventional solid resin dispersions. The unique nature of this product allows film formulation without high levels of coalescing solvent, which enables the formulation of low-odor, zero-VOC systems. 收起 | Request Sample |
| Dibasic Ester | Henan Harvest Chem Co., LTD. | Dibasic Ester is a colorless, transparent liquid. This product provides leveling, saponification and hydrolyze properties. Dibasic Ester is used in coil steel coating, automobile coating, baking coating, tin plat printing coating, carpentry coating, vesse...展開 Dibasic Ester is a colorless, transparent liquid. This product provides leveling, saponification and hydrolyze properties. Dibasic Ester is used in coil steel coating, automobile coating, baking coating, tin plat printing coating, carpentry coating, vessel/can coating, metal furniture coating, insulating coating, printing ink and resin applications. 收起 | |
| Dicyclohexylamine | Henan Harvest Chem Co., LTD. | Dicyclohexylamine has a molecular weight of 181.32 and has a slight amine odor. This product is inflammable, highly toxic and slightly soluble in water. Dicyclohexylamine is an organic intermediate for the manufacture of dyes, pyroxyline varnish, insectic...展開 Dicyclohexylamine has a molecular weight of 181.32 and has a slight amine odor. This product is inflammable, highly toxic and slightly soluble in water. Dicyclohexylamine is an organic intermediate for the manufacture of dyes, pyroxyline varnish, insecticides, catalysts etc. 收起 | |
| EPODIL® 742 | Evonik Operations GmbH, BL Crosslinkers | An epoxy resin system modifier. | Request Sample |
| EPODIL® 759 Reactive Diluent | Evonik Operations GmbH, BL Crosslinkers | EPODIL® 759 Reactive Diluent is an aliphatic glycidyl ether (C12– C13). The product is a monofunctional reactive diluent used to reduce the viscosity of epoxy resin systems. Since monofunctional diluents, in general, cause molecular weight chain terminati...展開 EPODIL® 759 Reactive Diluent is an aliphatic glycidyl ether (C12– C13). The product is a monofunctional reactive diluent used to reduce the viscosity of epoxy resin systems. Since monofunctional diluents, in general, cause molecular weight chain termination, the minimum amount necessary to achieve the desired viscosity reduction should be used. 收起 | Request Sample |
| HYBRIDUR® 580 Polymer Dispersion | Evonik Operations GmbH, BL Crosslinkers | HYBRIDUR® 580 Polymer Dispersion is an acrylic-urethane hybrid polymer dispersion. Cost-effective alternative to standard polyurethane dispersions. Provides outstanding adhesion to a wide variety of substrates, superior abrasion, and chemical and stain re...展開 HYBRIDUR® 580 Polymer Dispersion is an acrylic-urethane hybrid polymer dispersion. Cost-effective alternative to standard polyurethane dispersions. Provides outstanding adhesion to a wide variety of substrates, superior abrasion, and chemical and stain resistance. 收起 | Request Sample |
| IMICURE® AMI-1 Curing Agent | Evonik Operations GmbH, BL Crosslinkers | IMICURE® AMI-1 Curing Agent is a liquid, elevated-temperature curing agent for epoxy resins. It is readily compatible with both liquid and solid epoxy resins, and because it is a catalytic curing agent, it is used at low loadings of 1−5 phr. It is ideal f...展開 IMICURE® AMI-1 Curing Agent is a liquid, elevated-temperature curing agent for epoxy resins. It is readily compatible with both liquid and solid epoxy resins, and because it is a catalytic curing agent, it is used at low loadings of 1−5 phr. It is ideal for use in adhesives, pre-preg composites, and encapsulation. 收起 | Request Sample |
| IMICURE® EMI-24 Curing Agent | Evonik Operations GmbH, BL Crosslinkers | IMICURE® EMI-24 Curing Agent s a liquid imidazole which functions as both a curing agent and a cure accelerator for high-performance epoxy resin systems. This unusually versatile imidazole is readily processed, and provides excellent physical properties a...展開 IMICURE® EMI-24 Curing Agent s a liquid imidazole which functions as both a curing agent and a cure accelerator for high-performance epoxy resin systems. This unusually versatile imidazole is readily processed, and provides excellent physical properties across a wide range of curing temperatures. 收起 | Request Sample |
| IMICURE® Imidazole Curing Agent | Evonik Operations GmbH, BL Crosslinkers | IMICURE® Imidazole Curing Agent is an elevated-temperature curing agent for epoxy resins. It is readily compatible with both liquid and solid epoxy resins, and because it is a catalytic curing agent, it is used at low loadings of 1−5 phr. It is a good acc...展開 IMICURE® Imidazole Curing Agent is an elevated-temperature curing agent for epoxy resins. It is readily compatible with both liquid and solid epoxy resins, and because it is a catalytic curing agent, it is used at low loadings of 1−5 phr. It is a good accelerator for dicyandiamide, anhydride and phenolic curing agents. 收起 | Request Sample |
| N,N-dimethylformamide | Henan Harvest Chem Co., LTD. | N,N-dimethylformamide is a clear without suspension, inflammable liquid. This product is an organic solvent that is used in dye and paint applications. | |
| Polurene FP75 | S.A.P.I.C.I. SpA | Polurene FP75 is a polyurethane adduct with low free TDI content. This product meets EU, BFR, and FDA standards for food packaging. It can be used in 2K adhesives and inks. Polurene FP75 contains less than .5% TDI isocyanates. | |
| Polurene IR 51 AE | S.A.P.I.C.I. SpA | Polurene IR 51 AE is an isocyanurate with low free TDI content. This product dries quickly with limited yellowing. It can be used in polyurethane sealers, matt topcoats, adhesives, and inks. This product contains less than .3% TDI isocyanates. | |
| Polurene IR 51 K | S.A.P.I.C.I. SpA | Polurene IR 51 K is an aromatic isocyanurate based on toluenediisocyanate. This product cures quickly, with limited yellowing, good elasticity, and felxibility. It can be used in combination with any Rexin K saturated polyester in order to product prime...展開 Polurene IR 51 K is an aromatic isocyanurate based on toluenediisocyanate. This product cures quickly, with limited yellowing, good elasticity, and felxibility. It can be used in combination with any Rexin K saturated polyester in order to product primer or overprint varnishes. 收起 | |
| Polurene OK K | S.A.P.I.C.I. SpA | Polurene OK K is an aliphatic-aromatic isocyanurate. This product dries quickly. If used in combination with saturated polyesters, it can be used in the formulation of overprinting coatings and for inks with good non-yellowing properties. | |
| Polurene OK.D AE | S.A.P.I.C.I. SpA | Polurene OK.D AE is an aliphatic-aromatic isocyanurate. This product is compatible with nitrocellulose. It can be used in polishable varnishes and enamels for wood. It can also be used in enamels with good colour retention for metal, plastics and other...展開 Polurene OK.D AE is an aliphatic-aromatic isocyanurate. This product is compatible with nitrocellulose. It can be used in polishable varnishes and enamels for wood. It can also be used in enamels with good colour retention for metal, plastics and other substrates. Finally, it can be used in polyurethane adhesives and inks. This product contains less than .5% TDI or HDI isocyanates. 收起 | |
| Polurene T 70 AE | S.A.P.I.C.I. SpA | Polurene T 70 AE is an aliphatic polyisocyanate. When diluted, this product can be used to improve the performance of short or long oil drying resins. It can be used in 2K laminating adhesives and inks. It can also be used in 2K polyurethane coatings w...展開 Polurene T 70 AE is an aliphatic polyisocyanate. When diluted, this product can be used to improve the performance of short or long oil drying resins. It can be used in 2K laminating adhesives and inks. It can also be used in 2K polyurethane coatings with good chemical and weather resistance. This product contains less than .5% IPDI isocyanates. 收起 | |
| Polurgreen FP75-01 | S.A.P.I.C.I. SpA | Polurgreen FP75-01 is a polyurethane adduct. This product contains less than .1% TDI isocyanates. It may be used in 2K adhesives and inks. Polurgreen FP75-01 is in accord with EU, BFR, and FDA regulations for food packaging. | |
| Prizmalite P2453BTA | Prizmalite Industries Inc. | Prizmalite P2453BTA are hemispherically aluminum coated barium titanate glass microspheres. It is a fully inorganic product produced in a furnace and has an average diameter of 40 to 50 microns. Prizmalite P2453BTA can be used in textile and vinyl coating...展開 Prizmalite P2453BTA are hemispherically aluminum coated barium titanate glass microspheres. It is a fully inorganic product produced in a furnace and has an average diameter of 40 to 50 microns. Prizmalite P2453BTA can be used in textile and vinyl coatings, solvent and water-based coatings, reflective plastisol inks, tactile coatings, and reflective powder coatings. 收起 | |
| Rexin K 1939 | S.A.P.I.C.I. SpA | Rexin K 1939 is a solvent-based hydroxy-terminated saturated polyester resin. When used in the formulation of inks, this product's end result is light, clear, not sticky and highly resistant to aging, chemical agents, and heat. It can be used in the for...展開 Rexin K 1939 is a solvent-based hydroxy-terminated saturated polyester resin. When used in the formulation of inks, this product's end result is light, clear, not sticky and highly resistant to aging, chemical agents, and heat. It can be used in the formulation of 2K polyurethane overprinting lacquers and inks. 收起 | |
| Rexin K 411 | S.A.P.I.C.I. SpA | Rexin K 411 is a branched saturated polyester. This product has high chemical resistance, abrasion resistance, and surface hardness. It is compatible with nitrocellulose, urea, and melamine resins. This product can be used in high-performance inks for ...展開 Rexin K 411 is a branched saturated polyester. This product has high chemical resistance, abrasion resistance, and surface hardness. It is compatible with nitrocellulose, urea, and melamine resins. This product can be used in high-performance inks for prolonged and continuous use. 收起 | |
| Rexin K 6258 | S.A.P.I.C.I. SpA | Rexin K 6258 is a branched saturated polyester resin that is soluble in ethyl acetate. This product is compatible with nitrocellulose, urea and melamine resins. It can be used in the formulation of inks and overprint varnishes. | |
| Rexin K 6302 | S.A.P.I.C.I. SpA | Rexin K 6302 is a polyester resin. This product is soluble in ethyl acetate. It can be used in the formulation of inks and overprint varnishes. | |
| Sec-butyl Acetate | Henan Harvest Chem Co., LTD. | Sec-butyl Acetate is a colorless, flammable liquid. This product has a molecular weight of 116.16 and has a density of 0.866-0.878 g/cm³. Sec-butyl Acetate is used as a solvent in coating and printing ink applications. | |
| Tert-butyl Acetate | Henan Harvest Chem Co., LTD. | Tert-butyl Acetate is a colorless, transparent liquid. This product has a molecular weight of 116.6 g/cm³. Tert-butyl Acetate is used as a solvent and in coating material, paint, printing ink and sealing material applications. | |
| Tetrahydrofurfuryl Alcohol (THFA) | Henan Harvest Chem Co., LTD. | Tetrahydrofurfuryl Alcohol (THFA) is a colorless, low toxicity, liquid. This product provides moisture absorbing properties. Tetrahydrofurfuryl Alcohol (THFA) can also be used for making aminoplastics and a fine solution to resin,coating material and gre...展開 Tetrahydrofurfuryl Alcohol (THFA) is a colorless, low toxicity, liquid. This product provides moisture absorbing properties. Tetrahydrofurfuryl Alcohol (THFA) can also be used for making aminoplastics and a fine solution to resin,coating material and grease. In printing and dyeing, it can be used as a lubricant and dispersing agent. 收起 | |
| Ucopol M 33/65 K | S.A.P.I.C.I. SpA | Ucopol M 33/65 K is an aromatic moisture-curing polyurethane resin. This product has good wetting of different substrates and inks, and is compatible with alkyds, saturated polyester resins, nitrocellulose and vinyl co-polymers. It can be used in overpr...展開 Ucopol M 33/65 K is an aromatic moisture-curing polyurethane resin. This product has good wetting of different substrates and inks, and is compatible with alkyds, saturated polyester resins, nitrocellulose and vinyl co-polymers. It can be used in overprint varnishes and flexographic processes. 收起 | |
| Ucopol OL 100 | S.A.P.I.C.I. SpA | Ucopol OL 100 is an oleo-urethanic resin. This product has good wetting properties. It can be used as an impregnating agent for wood, and in the formulation of 1K enamels with high solids content. It can also be used for the formulation of printing ink...展開 Ucopol OL 100 is an oleo-urethanic resin. This product has good wetting properties. It can be used as an impregnating agent for wood, and in the formulation of 1K enamels with high solids content. It can also be used for the formulation of printing inks and pigmented pastes. This product has been obtained from renewable raw materials. 收起 | |
| VESTALITE® S 101 | Evonik Operations GmbH, BL Crosslinkers | VESTALITE® S 101 is a curing agent for epoxy resin matrix designed for SMC applications. Systems using VESTALITE® S 101 have a low initial viscosity during compounding, allowing excellent fiber wetting, highfiber volume fraction and efficient process...展開 VESTALITE® S 101 is a curing agent for epoxy resin matrix designed for SMC applications. Systems using VESTALITE® S 101 have a low initial viscosity during compounding, allowing excellent fiber wetting, highfiber volume fraction and efficient processing. The high reactivity of the hardener allows fast curing inabout 4 - 5 min at 150 °. 收起 | Request Sample |
| VESTALITE® S 102 | Evonik Operations GmbH, BL Crosslinkers | VESTALITE® S 102 is a curing agent for epoxy resin matrix designed for SMC applications. Systems using VESTALITE® S 102 have a low initial viscosity during compounding, allowing excellent fiber wetting, high fiber volume fraction and efficient processing....展開 VESTALITE® S 102 is a curing agent for epoxy resin matrix designed for SMC applications. Systems using VESTALITE® S 102 have a low initial viscosity during compounding, allowing excellent fiber wetting, high fiber volume fraction and efficient processing. The high reactivity of the hardener allows fast curing in about3 min at 150 °C. 收起 | Request Sample |
| VESTANAT® EP-EF 201 | Evonik Operations GmbH, BL Crosslinkers | VESTANAT® EP-EF 201 is a ready catalyzed polyethoxysilane. It is used as a crosslinker or sole binder to formulate highly scratch- and chemical resistant coatings, e. g. highly scratch resistant NISO*2coatings. The crosslinker is appropriate f...展開 VESTANAT® EP-EF 201 is a ready catalyzed polyethoxysilane. It is used as a crosslinker or sole binder to formulate highly scratch- and chemical resistant coatings, e. g. highly scratch resistant NISO*2coatings. The crosslinker is appropriate for the use in "do-it-yourself" (DIY) applications. 收起 | Request Sample |
| VESTANAT® EP-IPMS | Evonik Operations GmbH, BL Crosslinkers | VESTANAT® EP-IPMS is an isocyanate building block for the preparation of silane modified urethane resins. These resins may be used for the production of isocyanate-free, moisture curing adhesives, sealants and weatherable, UV- and ...展開 VESTANAT® EP-IPMS is an isocyanate building block for the preparation of silane modified urethane resins. These resins may be used for the production of isocyanate-free, moisture curing adhesives, sealants and weatherable, UV- and scratch-resistant coatings. 收起 | Request Sample |
| VESTANAT® EP-M 222 X | Evonik Operations GmbH, BL Crosslinkers | VESTANAT® EP-M 222 X is a methoxysilane functional urethane crosslinker that can be used as a crosslinker to increase the flexibility of highly scratch resistant coatings, e.g. highly scratch resistant NISO*2 coatings. It is dissolved at 85 % ...展開 VESTANAT® EP-M 222 X is a methoxysilane functional urethane crosslinker that can be used as a crosslinker to increase the flexibility of highly scratch resistant coatings, e.g. highly scratch resistant NISO*2 coatings. It is dissolved at 85 % in xylene, allowing it to be used in low-VOC coatings formulation. 收起 | Request Sample |
| VESTANAT® EP-M 60 | Evonik Operations GmbH, BL Crosslinkers | VESTANAT® EP-M 60 is a solvent free, polyfunctional methoxy silane. It is used as a crosslinker toformulate highly scratch resistant coatings. | Request Sample |
| VESTANAT® EP-MF 203 | Evonik Operations GmbH, BL Crosslinkers | VESTANAT® EP-MF 203 is a solvent free and ready catalyzed polymethoxysilane. It is used as a crosslinker or sole binder to formulate highly scratch- and chemical resistant coating, e. g. highly scratch resistant NISO*2coatings. | Request Sample |
| VESTANAT® EP-MF 204 | Evonik Operations GmbH, BL Crosslinkers | VESTANAT® EP-MF 204 is a solvent free and ready catalyzed polymethoxysilane. It is used as a crosslinker or sole binder to formulate highly scratch- and chemical resistant coating, e. g. highly scratch resistant NISO*2 coatings. | Request Sample |
| VESTANAT® EP-MF 205 | Evonik Operations GmbH, BL Crosslinkers | VESTANAT® EP-MF 205 is a solvent-based, ready catalyzed polymethoxysilane. It is used as a crosslinker or sole binder to formulate extremely flexible, highly scratch- and chemical resistant coatings., e.g. highly scratch resistant NISO*2coatings. VESTA...展開 VESTANAT® EP-MF 205 is a solvent-based, ready catalyzed polymethoxysilane. It is used as a crosslinker or sole binder to formulate extremely flexible, highly scratch- and chemical resistant coatings., e.g. highly scratch resistant NISO*2coatings. VESTANAT® EP-MF 205 is particularly characterized by an optimized price/performance ratio and a harmoniously tuned mechanical property profile. 收起 | Request Sample |
