| ACCULIN® 1000 (2071A) | The International Group, Inc. (IGI Wax) | ACCULIN® 1000 is a hard, high melting point polyethylene. | |
| ACCULIN® 1500 (2057A) | The International Group, Inc. (IGI Wax) | ACCULIN® 1500 is an extremely pure, inert, narrow melt point product that exhibits very specific expansion behavior. | |
| ACCULIN® 1500 (2073A) | The International Group, Inc. (IGI Wax) | ACCULIN® 1500 is a hard, low melting point polyethylene. | |
| ACCULIN® 2000 (2074A) | The International Group, Inc. (IGI Wax) | ACCULIN® 2000 is a hard, high melting point polyethylene. | |
| ACCULIN® 500 (2056A) | The International Group, Inc. (IGI Wax) | ACCULIN® 500 is a hard, low melting point polyethylene. | |
| ACCULIN® 600 (2059A) | The International Group, Inc. (IGI Wax) | ACCULIN® 600 is a hard, low melting point polyethylene. | |
| ACCULIN® 655 (2061A) | The International Group, Inc. (IGI Wax) | ACCULIN® 655 is a hard, low melting point polyethylene. | |
| ACCULIN® 725 (2063A) | The International Group, Inc. (IGI Wax) | ACCULIN® 725 is a hard, low melting point polyethylene. | |
| Aquaban® 9001A | The International Group, Inc. (IGI Wax) | Aquaban® 9001A is a concentrated general purpose water-based treatment for paper and corrugated board. It imparts a high level of water repellence. This product should be diluted with water before use, depending upon protection required. Typical dilution ...展開 Aquaban® 9001A is a concentrated general purpose water-based treatment for paper and corrugated board. It imparts a high level of water repellence. This product should be diluted with water before use, depending upon protection required. Typical dilution is 1:1 with water. 收起 | |
| Aquaban® 9009A | The International Group, Inc. (IGI Wax) | Aquaban® 9009A is a water-based treatment for paper and corrugated board. It imparts a high level of water repellence. | |
| Aquaban® 9010A | The International Group, Inc. (IGI Wax) | Aquaban® 9010A is a concentrated general purpose water-based treatment for paper and corrugated board. It imparts a high level of water repellence. For corrugated application, the product should be diluted with water before use, depending upon protection ...展開 Aquaban® 9010A is a concentrated general purpose water-based treatment for paper and corrugated board. It imparts a high level of water repellence. For corrugated application, the product should be diluted with water before use, depending upon protection required. Typical dilution is 1:1 with water. For general purpose application other than corrugated, the product can be used without dilution. 收起 | |
| ASTORLITE® J50 (4636A) | The International Group, Inc. (IGI Wax) | ASTORLITE® J50 is a soft, white, opaque wax specially designed for jar / container candles. Its cohesive strength and low shrinkage allow it to adhere to the container. Jar / container candles can be made with a single filling with no top-off necessary. | |
| Bake-Guard 9156A | The International Group, Inc. (IGI Wax) | Bake-Guard 9156A is a high performance water-based coating for corrugated board and paper substrates where exceptional grease and water resistance are required. Other unique features of this product are its high angle of slide and ease of printability. | |
| Barrier-Grip 9471A | The International Group, Inc. (IGI Wax) | Barrier-Grip 9471A is a water-based product that provides a high performance barrier against water and grease when applied to a paper based substrate. Coated surface also exhibits exceptionally high slide angle. | |
| Barrier-Grip 9471B | The International Group, Inc. (IGI Wax) | Barrier-Grip 9471B is a water-based product that provides a high performance barrier against water and grease when applied to a paper based substrate. Coated surface also exhibits exceptionally high slide angle. | |
| Barrier-Grip 9472B | The International Group, Inc. (IGI Wax) | Barrier-Grip 9472B is a water-based coating designed as an economical pre-coat for application onto kraft liners or other paper substrates. It seals the substrate and provides a uniform surface onto which functional coatings may be applied, optimising the...展開 Barrier-Grip 9472B is a water-based coating designed as an economical pre-coat for application onto kraft liners or other paper substrates. It seals the substrate and provides a uniform surface onto which functional coatings may be applied, optimising the performance of the functional coatings. 收起 | |
| Barrier-Grip R5701H | The International Group, Inc. (IGI Wax) | Barrier-Grip R5701H is a water-based product that provides a high performance barrier against water and grease when applied to a paper based substrate. Coated surface also exhibits exceptionally high slide angle. | |
| Barrier-Grip R6709A | The International Group, Inc. (IGI Wax) | Barrier-Grip R6709A is a water-based product that provides a high performance barrier against water and grease when applied to a paper based substrate. Coated surface also exhibits exceptionally high slide angle. | |
| Barrier-Seal R6728A | The International Group, Inc. (IGI Wax) | Barrier-Seal R6728A is a water-based coating designed for SBS cup stock and other paper based substrates. It can be used for any packaging application that requires excellent water resistance, oil resistance and heat seal. | |
| EVACOTE® 7089A | The International Group, Inc. (IGI Wax) | EVACOTE® 7089A is a specialty formulation of petroleum waxes and polymers suitable in consistency to be utilized as a sealant and coating for fertilizer applications. | |
| EVACOTE® 7292C | The International Group, Inc. (IGI Wax) | EVACOTE® 7292C is a premium multi-component formulation having good barrier properties against both water and moisture vapor. Its low viscosity might assist in achieving better machinability for application. | |
| IGI® 0431G | The International Group, Inc. (IGI Wax) | IGI® 0431G is a crude paraffin slack wax with relatively high oil content and melting point. | |
| IGI® 1230A | The International Group, Inc. (IGI Wax) | IGI® 1230A is a fully refined paraffin wax. | |
| IGI® 1239A | The International Group, Inc. (IGI Wax) | IGI® 1239A is a fully refined wax with a mid-range melting point. | |
| IGI® 1250A | The International Group, Inc. (IGI Wax) | IGI® 1250A is a fully refined paraffin wax. | |
| IGI® 1260A | The International Group, Inc. (IGI Wax) | IGI® 1260A is a fully refined paraffin wax. | |
| IGI® 1297A | The International Group, Inc. (IGI Wax) | IGI® 1297A is a fully refined paraffin wax with excellent heat stability. | |
| IGI® 1303A | The International Group, Inc. (IGI Wax) | IGI® 1303A is a fully refined high-melt paraffin wax that is used in a variety of applications including: hot-melt adhesives, investment casting, rubber products and textiles. | |
| IGI® 2202A | The International Group, Inc. (IGI Wax) | IGI® 2202A is a semi-refined, low-melt, scale wax that is used in a variety of applications including; candles and chlorination. | |
| IGI® 2251A | The International Group, Inc. (IGI Wax) | IGI® 2251A is a flexible physiotherapy wax. IGI® 2251A is a low melting wax that is totally transparent (clear) at 125°F (52°C). | |
| IGI® 2281A | The International Group, Inc. (IGI Wax) | IGI® 2281A is a specially selected grade of white crude scale wax possessing good flexibility as well as high gloss on air cooling. IGI® 2281A is ideal for use in container candles or as a coating wax for vegetables. The storage life of vegetables such as...展開 IGI® 2281A is a specially selected grade of white crude scale wax possessing good flexibility as well as high gloss on air cooling. IGI® 2281A is ideal for use in container candles or as a coating wax for vegetables. The storage life of vegetables such as turnips is improved by prevention of loss of moisture, while appearance is enhanced for improved marketability. Because it maintains flexibility at refrigerated temperatures, chipping and cracking of the coating is minimized when compared to other waxes. 收起 | |
| IGI® 2288A | The International Group, Inc. (IGI Wax) | IGI® 2288A is a refined scale wax designed for heat therapy of arthritic and related ailments. It has a low melting point to avoid discomfort on application, and solidifies to form a soft, flexible coating which is easily peeled from the skin. As IGI® 228...展開 IGI® 2288A is a refined scale wax designed for heat therapy of arthritic and related ailments. It has a low melting point to avoid discomfort on application, and solidifies to form a soft, flexible coating which is easily peeled from the skin. As IGI® 2288A solidifies, it continues to release heat to the treated area. 收起 | |
| IGI® 2289A | The International Group, Inc. (IGI Wax) | IGI® 2289A is a crude scale paraffin wax derived from petroleum. | |
| IGI® 6006A | The International Group, Inc. (IGI Wax) | IGI® 6006A is a specialty wax formulation for “one pour” container candles. | |
| IGI® 6027A | The International Group, Inc. (IGI Wax) | IGI® 6027A is a specialty formulation for container candles. | |
| IGI® 6028A | The International Group, Inc. (IGI Wax) | IGI® 6028A is a specialty formulation of vegetable derived waxes and petroleum derived waxes suitable in consistency to be used for the manufacture of pillar, votive and other molded candles. | |
| IGI® 6046A | The International Group, Inc. (IGI Wax) | IGI® 6046A is a specialty formulation for use in container candles. | |
| MICROSERE® 5788A | The International Group, Inc. (IGI Wax) | MICROSERE® 5788A is a unique, low-melt microcrystalline wax that is used in a variety of applications including paper packaging and candles. | |
| MICROSERE® 5806A | The International Group, Inc. (IGI Wax) | MICROSERE® 5806A is a high-melt, amber colored microcrystalline that is used in a variety of applications. | |
| MICROSERE® 5871A | The International Group, Inc. (IGI Wax) | MICROSERE® 5871A is a light colored, high-melt, microcrystalline wax that is used in a variety of applications. | |
| MICROSERE® 5890A | The International Group, Inc. (IGI Wax) | MICROSERE® 5890A is a white, high-melt, microcrystalline wax that is used in a variety of applications. MICROSERE® 5890A complies with the requirements for “Microcrystalline Wax” set by the United States Pharmacopeia (USP) / National Formulary (NF). | |
| MICROSERE® 5896A | The International Group, Inc. (IGI Wax) | MICROSERE® 5896A is a coating-grade, high melt, microcrystalline wax used in a variety of applications including; adhesives, candles, cosmetics, food coatings, inks, lubricants, personal care, polish, and textiles. | |
| MICROSERE® 5897A | The International Group, Inc. (IGI Wax) | MICROSERE® 5897A is a light colored, coating-grade, high melt, microcrystalline wax used in a variety of applications including; adhesives, candles, cosmetics, food coatings, inks, lubricants, personal care, polish, and textiles. | |
| MICROSERE® 5909A | The International Group, Inc. (IGI Wax) | MICROSERE® 5909A is a high-melt, microcrystalline wax that is used in a variety of applications including; plastics, adhesives, candles, cosmetics, food coatings, inks, lubricants, personal care, polish, and textiles. | |
| MICROSERE® 5910A | The International Group, Inc. (IGI Wax) | MICROSERE® 5910A is a high-melt, microcrystalline wax that is used in a variety of applications including; plastics, adhesives, candles, cosmetics, food coatings, inks, lubricants, personal care, polish, and textiles. | |
| MICROSERE® 5999A | The International Group, Inc. (IGI Wax) | MICROSERE® 5999A is an amber colored microcrystalline wax with hard consistency and a high melting point. | |
| Norub 9202B Green | The International Group, Inc. (IGI Wax) | Norub 9202B Green is a water-based emulsion developed for application to liners of corrugated board to reduce its abrasive characteristics. The coating is most effective when applied at a rate of 10 - 15 g/m2 or 2 - 3 lbs per MSF in a continuous film. Thi...展開 Norub 9202B Green is a water-based emulsion developed for application to liners of corrugated board to reduce its abrasive characteristics. The coating is most effective when applied at a rate of 10 - 15 g/m2 or 2 - 3 lbs per MSF in a continuous film. This product is an ideal non-scuff coating which can be used for packaging office furniture, filing cabinets, household goods, and most speciality metal products - wherever non-abrasiveness is required. 收起 | |
| PARAFFLEX® 4625A | The International Group, Inc. (IGI Wax) | PARAFFLEX® 4625A is a specialty formulation of petroleum waxes suitable for the manufacture of scented pillar, votive and other molded candles. | |
| PARAFFLEX® 4630A | The International Group, Inc. (IGI Wax) | PARAFFLEX® 4630A is a soft, smooth and creamy looking blend specially formulated for single pour container candles. | |
| PARAFFLEX® 4797A | The International Group, Inc. (IGI Wax) | PARAFFLEX® 4797A is a premium grade cascading wax for treatment of corrugated paperboard. | |
| PETAX® 0310A | The International Group, Inc. (IGI Wax) | PETAX® 0310A is a cream white, odorless petrolatum of medium consistency (hardness) and fiber length. PETAX® 0310A complies with the requirements for “White Petrolatum” set by the United States Pharmacopeia (USP). | |
| PETAX® 0320A | The International Group, Inc. (IGI Wax) | PETAX® 0320A is a cream white, odorless petrolatum with a soft consistency and medium fiber length. PETAX® 0320A complies with the requirements for “White Petrolatum” set by the United States Pharmacopeia (USP). | |
| PETAX® 0386A | The International Group, Inc. (IGI Wax) | PETAX® 0386A is a white, odorless petrolatum of medium consistency (hardness) and fiber length. PETAX® 0386A complies with the requirements for “White Petrolatum” set by the United States Pharmacopeia (USP). | |
| PETROFIBE® 0201A | The International Group, Inc. (IGI Wax) | PETROFIBE® 0201A is a dark brown industrial grade petrolatum of medium-hard consistency. PETROFIBE® 0201A finds economical use in applications not requiring the more expensive USP or NF grades. | |
| PETROFIBE® 0251A | The International Group, Inc. (IGI Wax) | PETROFIBE® 0251A is a mixture of soft petroleum waxes. | |
| Polurene FP75 | S.A.P.I.C.I. SpA | Polurene FP75 is a polyurethane adduct with low free TDI content. This product meets EU, BFR, and FDA standards for food packaging. It can be used in 2K adhesives and inks. Polurene FP75 contains less than .5% TDI isocyanates. | |
| Polurene IR 51 AE | S.A.P.I.C.I. SpA | Polurene IR 51 AE is an isocyanurate with low free TDI content. This product dries quickly with limited yellowing. It can be used in polyurethane sealers, matt topcoats, adhesives, and inks. This product contains less than .3% TDI isocyanates. | |
| Polurene IR 51 K | S.A.P.I.C.I. SpA | Polurene IR 51 K is an aromatic isocyanurate based on toluenediisocyanate. This product cures quickly, with limited yellowing, good elasticity, and felxibility. It can be used in combination with any Rexin K saturated polyester in order to product prime...展開 Polurene IR 51 K is an aromatic isocyanurate based on toluenediisocyanate. This product cures quickly, with limited yellowing, good elasticity, and felxibility. It can be used in combination with any Rexin K saturated polyester in order to product primer or overprint varnishes. 收起 | |
| Polurene OK K | S.A.P.I.C.I. SpA | Polurene OK K is an aliphatic-aromatic isocyanurate. This product dries quickly. If used in combination with saturated polyesters, it can be used in the formulation of overprinting coatings and for inks with good non-yellowing properties. | |
| Polurene OK.D AE | S.A.P.I.C.I. SpA | Polurene OK.D AE is an aliphatic-aromatic isocyanurate. This product is compatible with nitrocellulose. It can be used in polishable varnishes and enamels for wood. It can also be used in enamels with good colour retention for metal, plastics and other...展開 Polurene OK.D AE is an aliphatic-aromatic isocyanurate. This product is compatible with nitrocellulose. It can be used in polishable varnishes and enamels for wood. It can also be used in enamels with good colour retention for metal, plastics and other substrates. Finally, it can be used in polyurethane adhesives and inks. This product contains less than .5% TDI or HDI isocyanates. 收起 | |
| Polurene T 70 AE | S.A.P.I.C.I. SpA | Polurene T 70 AE is an aliphatic polyisocyanate. When diluted, this product can be used to improve the performance of short or long oil drying resins. It can be used in 2K laminating adhesives and inks. It can also be used in 2K polyurethane coatings w...展開 Polurene T 70 AE is an aliphatic polyisocyanate. When diluted, this product can be used to improve the performance of short or long oil drying resins. It can be used in 2K laminating adhesives and inks. It can also be used in 2K polyurethane coatings with good chemical and weather resistance. This product contains less than .5% IPDI isocyanates. 收起 | |
| Polurgreen FP75-01 | S.A.P.I.C.I. SpA | Polurgreen FP75-01 is a polyurethane adduct. This product contains less than .1% TDI isocyanates. It may be used in 2K adhesives and inks. Polurgreen FP75-01 is in accord with EU, BFR, and FDA regulations for food packaging. | |
| Prizmalite P2453BTA | Prizmalite Industries Inc. | Prizmalite P2453BTA are hemispherically aluminum coated barium titanate glass microspheres. It is a fully inorganic product produced in a furnace and has an average diameter of 40 to 50 microns. Prizmalite P2453BTA can be used in textile and vinyl coating...展開 Prizmalite P2453BTA are hemispherically aluminum coated barium titanate glass microspheres. It is a fully inorganic product produced in a furnace and has an average diameter of 40 to 50 microns. Prizmalite P2453BTA can be used in textile and vinyl coatings, solvent and water-based coatings, reflective plastisol inks, tactile coatings, and reflective powder coatings. 收起 | |
| Rexin K 1939 | S.A.P.I.C.I. SpA | Rexin K 1939 is a solvent-based hydroxy-terminated saturated polyester resin. When used in the formulation of inks, this product's end result is light, clear, not sticky and highly resistant to aging, chemical agents, and heat. It can be used in the for...展開 Rexin K 1939 is a solvent-based hydroxy-terminated saturated polyester resin. When used in the formulation of inks, this product's end result is light, clear, not sticky and highly resistant to aging, chemical agents, and heat. It can be used in the formulation of 2K polyurethane overprinting lacquers and inks. 收起 | |
| Rexin K 411 | S.A.P.I.C.I. SpA | Rexin K 411 is a branched saturated polyester. This product has high chemical resistance, abrasion resistance, and surface hardness. It is compatible with nitrocellulose, urea, and melamine resins. This product can be used in high-performance inks for ...展開 Rexin K 411 is a branched saturated polyester. This product has high chemical resistance, abrasion resistance, and surface hardness. It is compatible with nitrocellulose, urea, and melamine resins. This product can be used in high-performance inks for prolonged and continuous use. 收起 | |
| Rexin K 6258 | S.A.P.I.C.I. SpA | Rexin K 6258 is a branched saturated polyester resin that is soluble in ethyl acetate. This product is compatible with nitrocellulose, urea and melamine resins. It can be used in the formulation of inks and overprint varnishes. | |
| Rexin K 6302 | S.A.P.I.C.I. SpA | Rexin K 6302 is a polyester resin. This product is soluble in ethyl acetate. It can be used in the formulation of inks and overprint varnishes. | |
| Ucopol M 33/65 K | S.A.P.I.C.I. SpA | Ucopol M 33/65 K is an aromatic moisture-curing polyurethane resin. This product has good wetting of different substrates and inks, and is compatible with alkyds, saturated polyester resins, nitrocellulose and vinyl co-polymers. It can be used in overpr...展開 Ucopol M 33/65 K is an aromatic moisture-curing polyurethane resin. This product has good wetting of different substrates and inks, and is compatible with alkyds, saturated polyester resins, nitrocellulose and vinyl co-polymers. It can be used in overprint varnishes and flexographic processes. 收起 | |
| Ucopol OL 100 | S.A.P.I.C.I. SpA | Ucopol OL 100 is an oleo-urethanic resin. This product has good wetting properties. It can be used as an impregnating agent for wood, and in the formulation of 1K enamels with high solids content. It can also be used for the formulation of printing ink...展開 Ucopol OL 100 is an oleo-urethanic resin. This product has good wetting properties. It can be used as an impregnating agent for wood, and in the formulation of 1K enamels with high solids content. It can also be used for the formulation of printing inks and pigmented pastes. This product has been obtained from renewable raw materials. 收起 | |
| VAPORGUARD® R5341B | The International Group, Inc. (IGI Wax) | VAPORGUARD® R5341B is a water-based coating designed for corrugated board liners and other paper based substrates. It can be used for any packaging application that requires excellent water resistance, and low rate of moisture vapor transmission (MVTR). | |
| VAPORGUARD® R5715A | The International Group, Inc. (IGI Wax) | VAPORGUARD® R5715A is a water-based coating designed for kraft liners. It can be used for any packaging application that requires excellent water resistance, and low rate of moisture vapor transmission (MVTR). |
