| Biocel SP/SG 85 | Gohil Dyechem Corporation | Biocel SP/SG 85 is a light brown, granular powder used in the preservation of wood. It is used as an industrial fungicide in paints and adhesives. | |
| EXOCOAT™ AM | Axcentive Sarl | EXOCOAT® AM by Axcentive is a water-based, doped nano-titanium oxide sol with a strong antimicrobial effect and anatase structure. It prevents the build-up of microbes as the photocatalytic effect results in effective radical formation which breaks down v...展開 EXOCOAT® AM by Axcentive is a water-based, doped nano-titanium oxide sol with a strong antimicrobial effect and anatase structure. It prevents the build-up of microbes as the photocatalytic effect results in effective radical formation which breaks down viruses and bacteria. It eradicates viruses such as influenza, SARS-COV-2, dengue & hepatitis and bacteria such as E. coli, MSRA, streptococcus, listeria, pneumonia, and salmonella. It is activated by light and displays quick drying at room temperature. Spray application is recommended to reach thin monolayers. It exhibits curing at room temperature up to 300°C and super hard particles (1GPa Vickers). It is easy to apply & durable, allowing longer disinfection intervals while preserving hygiene level. It shows non-silver leaching, efficacious even under low light conditions, lower service frequency, and no need for frequent disinfection routine. It is used in the state-of-the-art continuous antimicrobial coating for high-traffic areas. EXOCOAT® AM is suitable for topcoats for any surface inside buildings, stores, hospitals, and vehicles. The shelf life of this product is 9 months. 收起 | |
| Fluorcolor 2700 BLM | Fluorcolors Pigmentos industria e comercio Ltda. | Fluorcolor 2700 BLM is a blue vivid fluorescent liquid dispersion. This product is most commonly used in waterborne coating, water based ink, and paper coating applications. It has a good wash resistance and a viscosity of 400-1000 cps. | |
| Fluorcolor 2700 GRM | Fluorcolors Pigmentos industria e comercio Ltda. | Fluorcolor 2700 GRM is a green vivid fluorescent liquid dispersion. This product is most commonly used in waterborne coating, water based ink, and paper coating applications. It has a good wash resistance and a viscosity of 400-1000 cps. | |
| Fluorcolor 2700 MGT | Fluorcolors Pigmentos industria e comercio Ltda. | Fluorcolor 2700 MGT is a pink vivid fluorescent liquid dispersion. This product is most commonly used in waterborne coating, water based ink, and paper coating applications. It has a good wash resistance and a viscosity of 400-1000 cps. | |
| Fluorcolor 2700 MMG | Fluorcolors Pigmentos industria e comercio Ltda. | Fluorcolor 2700 MMG is a magenta vivid fluorescent liquid dispersion. This product is most commonly used in waterborne coating, water based ink, and paper coating applications. It has a good wash resistance and a viscosity of 400-1000 cps. | |
| Fluorcolor 2700 ORG | Fluorcolors Pigmentos industria e comercio Ltda. | Fluorcolor 2700 ORG is a yellowish orange vivid fluorescent liquid dispersion. This product is most commonly used in waterborne coating, water based ink, and paper coating applications. It has a good wash resistance and a viscosity of 400-1000 cps. | |
| Fluorcolor 2700 ORM | Fluorcolors Pigmentos industria e comercio Ltda. | Fluorcolor 2700 ORM is an orange vivid fluorescent liquid dispersion. This product is most commonly used in waterborne coating, water based ink, and paper coating applications.It has a good wash resistance and a viscosity of 400-1000 cps. | |
| Fluorcolor 2700 RDM | Fluorcolors Pigmentos industria e comercio Ltda. | Fluorcolor 2700 RDM is an orange red vivid fluorescent liquid dispersion. This product is most commonly used in waterborne coating, water based ink, and paper coating applications. It has a good wash resistance and a viscosity of 400-1000 cps. | |
| Fluorcolor 2700 RED | Fluorcolors Pigmentos industria e comercio Ltda. | Fluorcolor 2700 RED is a red vivid fluorescent liquid dispersion. This product is most commonly used in waterborne coating, water based ink, and paper coating applications. It has a good wash resistance and a viscosity of 400-1000 cps. | |
| Fluorcolor 2700 VLT | Fluorcolors Pigmentos industria e comercio Ltda. | Fluorcolor 2700 VLT is a violet vivid fluorescent liquid dispersion. This product is most commonly used in waterborne coating, water based ink, and paper coating applications. It has a good wash resistance and a viscosity of 400-1000 cps. | |
| Fluorcolor 2700 YLW | Fluorcolors Pigmentos industria e comercio Ltda. | Fluorcolor 2700 YLW is a yellow vivid fluorescent liquid dispersion. This product is most commonly used in waterborne coating, water based ink, and paper coating applications. It has a good wash resistance and a viscosity of 400-1000 cps. | |
| Ketjenflex® 12 | Axcentive Sarl | Ketjenflex® 12 is a citrate based clear liquid. It is used as a partially bio-based plasticizer for inks, adhesives, and coatings. Ketjenflex® 12 can be used in vinyl formulations such as PVC plastics, vinyl flooring, solution vinyl resins, wood vinyl com...展開 Ketjenflex® 12 is a citrate based clear liquid. It is used as a partially bio-based plasticizer for inks, adhesives, and coatings. Ketjenflex® 12 can be used in vinyl formulations such as PVC plastics, vinyl flooring, solution vinyl resins, wood vinyl compounds, and PVC based plastisols. It can also be used in PVC based polymers, nitrocellulose resins, and cyanoacrylate adhesives. 收起 | |
| Ketjenflex® 6 | Axcentive Sarl | Ketjenflex® 6 is a toluene sulfonamide in the form of a white crystalline powder. It is used as a plasticizer in inks, adhesives, and coatings. Ketjenflex® 6 can be used with resins such as nitrocellulose, polyamide, PVAC, rosin, epoxy, and more. | |
| Ketjenflex® 8 | Axcentive Sarl | Ketjenflex® 8 is a toluene sulfonamide in the form of a clear, slightly yellow liquid. It is used as a plasticizer and adhesion promoter in inks, adhesives, and coatings. Ketjenflex® 8 can be used with applications such as PVAC, nitrocellulose, powder coa...展開 Ketjenflex® 8 is a toluene sulfonamide in the form of a clear, slightly yellow liquid. It is used as a plasticizer and adhesion promoter in inks, adhesives, and coatings. Ketjenflex® 8 can be used with applications such as PVAC, nitrocellulose, powder coatings, synthetic polyamides, epoxy coatings and adhesives, and more. 收起 | |
| Ketjenflex® CP | Axcentive Sarl | Ketjenflex® CP is a para toluene sulfonic acid in the form of a white crystalline powder. It is used as a strong protonating catalyst. Ketjenflex® CP can be used in acid cured wood coatings. | |
| Ketjenflex® MH | Axcentive Sarl | Ketjenflex® MH is a toluene sulfonamide in the form of a hard, transparent resin. It is used at a plasticizing co-resin in coatings, adhesives, and inks. Ketjenflex® MH can be used in nitrocellulose coatings, epoxy based coatings and adhesives, and printi...展開 Ketjenflex® MH is a toluene sulfonamide in the form of a hard, transparent resin. It is used at a plasticizing co-resin in coatings, adhesives, and inks. Ketjenflex® MH can be used in nitrocellulose coatings, epoxy based coatings and adhesives, and printing inks. 收起 | |
| Ketjenflex® MS 80 | Axcentive Sarl | Ketjenflex® MS 80 is a toluene sulfonamide in the form of a transparent liquid. it is used as a plasticizing co-resin in butyl acetate for coatings, adhesives, and inks. Ketjenflex® MS 80 is the liquid version of Ketjenflex® MH and can easily be poured in...展開 Ketjenflex® MS 80 is a toluene sulfonamide in the form of a transparent liquid. it is used as a plasticizing co-resin in butyl acetate for coatings, adhesives, and inks. Ketjenflex® MS 80 is the liquid version of Ketjenflex® MH and can easily be poured into desired formulations. It has applications in nitrocellulose coatings, cellulose acetate formulations, and printing inks. 收起 | |
| Luxcor 200 AML | Fluorcolors Pigmentos industria e comercio Ltda. | Luxcor 200 AML is a yellow fine powder with intense color. This product is most commonly used in paints and inks, and has good solvent resistance. | |
| Luxcor 200 AZL | Fluorcolors Pigmentos industria e comercio Ltda. | Luxcor 200 AZL is a blue fine powder with intense color. This product is most commonly used in paints and inks, and has good solvent resistance. | |
| Luxcor 200 LRJ | Fluorcolors Pigmentos industria e comercio Ltda. | Luxcor 200 LRJ is an orange fine powder with intense color. This product is most commonly used in paints and inks, and has good solvent resistance. | |
| Luxcor 200 LRM | Fluorcolors Pigmentos industria e comercio Ltda. | Luxcor 200 LRM is a yellowish orange fine powder with intense color. This product is most commonly used in paints and inks, and has good solvent resistance. | |
| Luxcor 200 MGT | Fluorcolors Pigmentos industria e comercio Ltda. | Luxcor 200 MGT is a pink fine powder with intense color. This product is most commonly used in paints and inks, and has good solvent resistance. | |
| Luxcor 200 MMG | Fluorcolors Pigmentos industria e comercio Ltda. | Luxcor 200 MMG is a magenta fine powder with intense color. This product is most commonly used in paints and inks, and has good solvent resistance. | |
| Luxcor 200 VLT | Fluorcolors Pigmentos industria e comercio Ltda. | Luxcor 200 VLT is a violet fine powder with intense color. This product is most commonly used in paints and inks, and has good solvent resistance. | |
| Luxcor 200 VML | Fluorcolors Pigmentos industria e comercio Ltda. | Luxcor 200 VML is a red 2 fine powder with intense color. This product is most commonly used in paints and inks, and has good solvent resistance. | |
| Luxcor 200 VMM | Fluorcolors Pigmentos industria e comercio Ltda. | Luxcor 200 VMM is a red 1 fine powder with intense color. This product is most commonly used in paints and inks, and has good solvent resistance. | |
| Luxcor 200 VRD | Fluorcolors Pigmentos industria e comercio Ltda. | Luxcor 200 VRD is a green fine powder with intense color. This product is most commonly used in paints and inks, and has good solvent resistance. | |
| Luxcor 500 AML | Fluorcolors Pigmentos industria e comercio Ltda. | Luxcor 500 AML is a yellow thick powder with intense color. This product is most commonly used in flexo inks and rotogravure applications. It has a high color strength and a density of 1.4 g/cm3. | |
| Luxcor 500 MGT | Fluorcolors Pigmentos industria e comercio Ltda. | Luxcor 500 MGT is a pink thick powder with intense color. This product is most commonly used in flexo inks and rotogravure applications. It has a high color strength and a density of 1.4 g/cm3. | |
| Luxcor 500 VMM | Fluorcolors Pigmentos industria e comercio Ltda. | Luxcor 500 VMM is a red 1 thick powder with intense color. This product is most commonly used in flexo inks and rotogravure applications. It has a high color strength and a density of 1.4 g/cm3. | |
| Proxel GXL | Gohil Dyechem Corporation | Proxel GXL is a broad spectrum biocide used for the preservation of industrial water-based products against spoilage from bacteria, yeasts and fungi. This brown liquid is effective in synthetic polymer emulsions, emulsion paints, water-based adhesives, pr...展開 Proxel GXL is a broad spectrum biocide used for the preservation of industrial water-based products against spoilage from bacteria, yeasts and fungi. This brown liquid is effective in synthetic polymer emulsions, emulsion paints, water-based adhesives, printing inks, paper coating compositions, and aqueous mineral and pigment slurries. 收起 |
