| EXOCOAT™ AM | Axcentive Sarl | EXOCOAT® AM by Axcentive is a water-based, doped nano-titanium oxide sol with a strong antimicrobial effect and anatase structure. It prevents the build-up of microbes as the photocatalytic effect results in effective radical formation which breaks down v...展開 EXOCOAT® AM by Axcentive is a water-based, doped nano-titanium oxide sol with a strong antimicrobial effect and anatase structure. It prevents the build-up of microbes as the photocatalytic effect results in effective radical formation which breaks down viruses and bacteria. It eradicates viruses such as influenza, SARS-COV-2, dengue & hepatitis and bacteria such as E. coli, MSRA, streptococcus, listeria, pneumonia, and salmonella. It is activated by light and displays quick drying at room temperature. Spray application is recommended to reach thin monolayers. It exhibits curing at room temperature up to 300°C and super hard particles (1GPa Vickers). It is easy to apply & durable, allowing longer disinfection intervals while preserving hygiene level. It shows non-silver leaching, efficacious even under low light conditions, lower service frequency, and no need for frequent disinfection routine. It is used in the state-of-the-art continuous antimicrobial coating for high-traffic areas. EXOCOAT® AM is suitable for topcoats for any surface inside buildings, stores, hospitals, and vehicles. The shelf life of this product is 9 months. 收起 | |
| Ketjenflex® 12 | Axcentive Sarl | Ketjenflex® 12 is a citrate based clear liquid. It is used as a partially bio-based plasticizer for inks, adhesives, and coatings. Ketjenflex® 12 can be used in vinyl formulations such as PVC plastics, vinyl flooring, solution vinyl resins, wood vinyl com...展開 Ketjenflex® 12 is a citrate based clear liquid. It is used as a partially bio-based plasticizer for inks, adhesives, and coatings. Ketjenflex® 12 can be used in vinyl formulations such as PVC plastics, vinyl flooring, solution vinyl resins, wood vinyl compounds, and PVC based plastisols. It can also be used in PVC based polymers, nitrocellulose resins, and cyanoacrylate adhesives. 收起 | |
| Ketjenflex® 6 | Axcentive Sarl | Ketjenflex® 6 is a toluene sulfonamide in the form of a white crystalline powder. It is used as a plasticizer in inks, adhesives, and coatings. Ketjenflex® 6 can be used with resins such as nitrocellulose, polyamide, PVAC, rosin, epoxy, and more. | |
| Ketjenflex® 8 | Axcentive Sarl | Ketjenflex® 8 is a toluene sulfonamide in the form of a clear, slightly yellow liquid. It is used as a plasticizer and adhesion promoter in inks, adhesives, and coatings. Ketjenflex® 8 can be used with applications such as PVAC, nitrocellulose, powder coa...展開 Ketjenflex® 8 is a toluene sulfonamide in the form of a clear, slightly yellow liquid. It is used as a plasticizer and adhesion promoter in inks, adhesives, and coatings. Ketjenflex® 8 can be used with applications such as PVAC, nitrocellulose, powder coatings, synthetic polyamides, epoxy coatings and adhesives, and more. 收起 | |
| Ketjenflex® CP | Axcentive Sarl | Ketjenflex® CP is a para toluene sulfonic acid in the form of a white crystalline powder. It is used as a strong protonating catalyst. Ketjenflex® CP can be used in acid cured wood coatings. | |
| Ketjenflex® MH | Axcentive Sarl | Ketjenflex® MH is a toluene sulfonamide in the form of a hard, transparent resin. It is used at a plasticizing co-resin in coatings, adhesives, and inks. Ketjenflex® MH can be used in nitrocellulose coatings, epoxy based coatings and adhesives, and printi...展開 Ketjenflex® MH is a toluene sulfonamide in the form of a hard, transparent resin. It is used at a plasticizing co-resin in coatings, adhesives, and inks. Ketjenflex® MH can be used in nitrocellulose coatings, epoxy based coatings and adhesives, and printing inks. 收起 | |
| Ketjenflex® MS 80 | Axcentive Sarl | Ketjenflex® MS 80 is a toluene sulfonamide in the form of a transparent liquid. it is used as a plasticizing co-resin in butyl acetate for coatings, adhesives, and inks. Ketjenflex® MS 80 is the liquid version of Ketjenflex® MH and can easily be poured in...展開 Ketjenflex® MS 80 is a toluene sulfonamide in the form of a transparent liquid. it is used as a plasticizing co-resin in butyl acetate for coatings, adhesives, and inks. Ketjenflex® MS 80 is the liquid version of Ketjenflex® MH and can easily be poured into desired formulations. It has applications in nitrocellulose coatings, cellulose acetate formulations, and printing inks. 收起 | |
| Pigment Red 146 | Gaoyou Huabao Pigment Co., Ltd. | Pigment Red 146 is a blue-red shaded pigment that has a density of 1.4 g/cm3 and heat resistance of 180°C. This product is commonly used in inks, paints, and coatings. | |
| Pigment Yellow 83 | Gaoyou Huabao Pigment Co., Ltd. | Pigment Yellow 83 is a red-yellow shaded pigment that has a density of 1.5 g/cm3 and heat resistance of 250°C. This product is often used in paints and inks. | |
| Superfast™ Orange GPP | Gaoyou Huabao Pigment Co., Ltd. | Superfast™ Orange GPP is a yellow shaded orange pigment that is partially transparent and has high color strength. It has a density of 1.4-1.6 g/M2 and a heat resistance of 290-300°C. This product is commonly used to offer excellent heat stability in solv...展開 Superfast™ Orange GPP is a yellow shaded orange pigment that is partially transparent and has high color strength. It has a density of 1.4-1.6 g/M2 and a heat resistance of 290-300°C. This product is commonly used to offer excellent heat stability in solvent-based inks and industrial paints. 收起 | |
| Superfast™ Pink EP | Gaoyou Huabao Pigment Co., Ltd. | Superfast™ Pink EP is a blue shaded pink pigment that is partially transparent and has high color strength. It has a density of 10-12 g/M2 and a heat resistance of 290-300°C. This product is commonly used in decorative paints, industrial paints, coil coat...展開 Superfast™ Pink EP is a blue shaded pink pigment that is partially transparent and has high color strength. It has a density of 10-12 g/M2 and a heat resistance of 290-300°C. This product is commonly used in decorative paints, industrial paints, coil coatings, powder coatings, and offset inks. 收起 | |
| Superfast™ Red HF4C | Gaoyou Huabao Pigment Co., Ltd. | Superfast™ Red HF4C is a yellow shaded red pigment that is partially transparent and has high color strength. It has a density of 1.4 g/M2 and heat resistance of 250°C. This product is commonly used in decorative paints, solvent-based inks and industrial ...展開 Superfast™ Red HF4C is a yellow shaded red pigment that is partially transparent and has high color strength. It has a density of 1.4 g/M2 and heat resistance of 250°C. This product is commonly used in decorative paints, solvent-based inks and industrial paints. 收起 | |
| Superfast™ Violet RL | Gaoyou Huabao Pigment Co., Ltd. | Superfast™ Violet RL is a brilliant and very strong violet pigment that has very high fastness levels. It has a density of 1.50 g/cm3 and heat resistance of 280-300°C. This product is used in decorative paints, industrial paints, coil coatings, powder coa...展開 Superfast™ Violet RL is a brilliant and very strong violet pigment that has very high fastness levels. It has a density of 1.50 g/cm3 and heat resistance of 280-300°C. This product is used in decorative paints, industrial paints, coil coatings, powder coatings, water-based inks, and offset inks. 收起 | |
| Superfast™ Yellow H4G | Gaoyou Huabao Pigment Co., Ltd. | Superfast™ Yellow H4G is a greenish yellow pigment that is partially transparent and has high light resistance. It has a density of 1.4-1.6 g/m2 and heat resistance of 250-280°C. This product is used to offer light resistance and exceptional dispersibilit...展開 Superfast™ Yellow H4G is a greenish yellow pigment that is partially transparent and has high light resistance. It has a density of 1.4-1.6 g/m2 and heat resistance of 250-280°C. This product is used to offer light resistance and exceptional dispersibility in solvent-based inks and paints, offset inks, and industrial paints. 收起 | |
| Superfast™ Yellow HGP | Gaoyou Huabao Pigment Co., Ltd. | Superfast™ Yellow HGP is a greenish yellow pigment that is partially transparent and has high color strength. It has a density of 1.46 g/M2 and heat resistance of 260-280°C. This product is used in solvent-based industrial paints and inks, decorative pain...展開 Superfast™ Yellow HGP is a greenish yellow pigment that is partially transparent and has high color strength. It has a density of 1.46 g/M2 and heat resistance of 260-280°C. This product is used in solvent-based industrial paints and inks, decorative paints, and offset inks. 收起 |
