Bisomer® BZMA | GEO Specialty Chemicals, Inc. TRIMET Products Group | Bisomer® BZMA (Benzyl Methacrylate) is low viscosity mono-functional monomer suitable for a wide range of applications. It is low viscosity and hydrophobic, and is particularly suitable as a reactive diluent in adhesives, sealants, inks and coatings. This...展開 Bisomer® BZMA (Benzyl Methacrylate) is low viscosity mono-functional monomer suitable for a wide range of applications. It is low viscosity and hydrophobic, and is particularly suitable as a reactive diluent in adhesives, sealants, inks and coatings. This product has a methoxyhydroquinone content of 50 ± 5ppm, an acid number of < 0.02mg KOH/g, and a refractive index @ 20°C of 1.51. It can be used as a co-monomer in PMMA based acrylic formulations to increase the impact resistance, hydrophobicity and structural integrity of resins, composites and coatings. It is also particularly useful as a replacement for styrene in unsaturated polyester and vinyl ester resins used in a wide range of applications including chemical fixings and composites. Due to its high refractive index, Bisomer® BZMA is also suitable for cast lenses, optical fibres, transparent laminates and other applications where clarity is a key requirement. 收起 | |
Bisomer® PPA 6 | GEO Specialty Chemicals, Inc. TRIMET Products Group | 為制備UV固化氨基甲酸酯丙烯酸酯齊聚物提供了一種非常規的途徑。它是用於基於氨基甲酸酯丙烯酸酯和乙烯基酯(環氧乙烯基酯)UV體系的出色的低收縮反應性稀釋劑 | |
DMPA® Polyol HA-0135 | GEO Specialty Chemicals, Inc. TRIMET Products Group | 是一種DMPA CHDA BDO己二酸聚酯樹脂,98%不揮發組分。它可作為水性體系的酸官能團來源和作為共樹脂改進顏料的潤濕、分散和穩定。 | |
Kingmide 530 | Sanho Chemical Co., Ltd. | Kingmide 530 is a fatty polyamide resin in a brown pellet form. This product has a softening point of 105-115°C. Kingmide 530 is most commonly used in rotogravure printing ink and alkyd varnish formulation applications. | |
Kingmide 549 | Sanho Chemical Co., Ltd. | Kingmide 549 is a fatty polyamide resin in a brown-yellow pellet form. This product has a softening point of 112-119°C. Kingmide 549 is most commonly used in flexographic printing ink formulation applications. | |
Kingmide 550 | Sanho Chemical Co., Ltd. | Kingmide 550 is a solid-type fatty polyamide resin in a brown-yellow pellet form. This product has a softening point of 105-115°C. Kingmide 550 is most commonly used in rotogravure printing ink formulation applications. | |
Kingmide H-135GC | Sanho Chemical Co., Ltd. | Kingmide H-135GC is a high molecular weight polyamide resin in an amber-colored pellet form. This product has a viscosity of 1500-4000 mPa.s and a softening point of 130-140°C. Kingmide H-135GC is most commonly used in hot-melt adhesive formulation applic...展開 Kingmide H-135GC is a high molecular weight polyamide resin in an amber-colored pellet form. This product has a viscosity of 1500-4000 mPa.s and a softening point of 130-140°C. Kingmide H-135GC is most commonly used in hot-melt adhesive formulation applications. 收起 | |
KR-120 | Changsha Creature Industry Co., Ltd. | KR-120 is a polyketone resin that is in the form of light white grains or a block solid. This product can provide high gloss, hardness, anti-degradation, weather resistance, and heat resistance in paints, coatings, adhesives, and inks. | |
KR-120A | Changsha Creature Industry Co., Ltd. | KR-120A is a polyketone resin that is in the form of light white grains or a block solid. This product can provide high gloss, hardness, anti-degradation, weather resistance, and heat resistance in paints, coatings, adhesives, and inks. | |
KR-120B | Changsha Creature Industry Co., Ltd. | KR-120B is a polyketone resin that is in the form of light white grains or a block solid. This product can provide high gloss, hardness, anti-degradation, weather resistance, and heat resistance in paints, coatings, adhesives, and inks. | |
KR-120W | Changsha Creature Industry Co., Ltd. | KR-120W is a polyketone resin that is in the form of light yellow grains or a block solid. This product can provide high gloss, hardness, anti-degradation, weather resistance, and heat resistance in paints, coatings, adhesives, and inks. | |
KR-130 | Changsha Creature Industry Co., Ltd. | KR-130 is a polyketone resin that is in the form of light yellow grains or a block solid. This product can provide high gloss, hardness, anti-degradation, weather resistance, and heat resistance in paints, coatings, adhesives, and inks. | |
KR-80F | Changsha Creature Industry Co., Ltd. | KR-80F is a polyketone resin that is in the form of a light yellow block solid. This product can provide high gloss, hardness, anti-degradation, weather resistance, and heat resistance in paints, coatings, adhesives, and inks. | |
KR-A101 | Changsha Creature Industry Co., Ltd. | KR-A101 is a polyacetal resin that is in the form of a colorless, transparent to light yellow semi-circle fine small grains. This product can be used in solvent-based coatings and inks, solvent-free coatings, UV light curable coatings, powder coatings, mo...展開 KR-A101 is a polyacetal resin that is in the form of a colorless, transparent to light yellow semi-circle fine small grains. This product can be used in solvent-based coatings and inks, solvent-free coatings, UV light curable coatings, powder coatings, modified resins, and other systems as a special hard resin. 收起 | |
KR-A81 | Changsha Creature Industry Co., Ltd. | KR-A81 is a polyacetal resin that is in the form of a colorless, transparent to light yellow semi-circle fine small grains. This product can be used in solvent-based coatings and inks, solvent-free coatings, UV light curable coatings, powder coatings, mod...展開 KR-A81 is a polyacetal resin that is in the form of a colorless, transparent to light yellow semi-circle fine small grains. This product can be used in solvent-based coatings and inks, solvent-free coatings, UV light curable coatings, powder coatings, modified resins, and other systems as a special hard resin. 收起 | |
Tohmide 393 | Sanho Chemical Co., Ltd. | Tohmide 393 is a fatty polyamide resin in a brown-yellow pellet form. This product has a softening point of 110-120°C. Tohmide 393 is most commonly used in rotogravure printing ink and varnish formulation applications. | |
Tohmide 394-N | Sanho Chemical Co., Ltd. | Tohmide 394-N is a solid-type fatty polyamide resin in a brown-yellow pellet form. This product has a softening point of 105-115°C. Tohmide 394-N is most commonly used in rotogravure printing ink formulation applications. | |
Tohmide 90 | Sanho Chemical Co., Ltd. | Tohmide 90 is a fatty polyamide resin in a brown-yellow pellet form. This product has a softening point of 105-115°C. Tohmide 90 is most commonly used in rotogravure printing ink formulation applications. | |
Tohmide 92 | Sanho Chemical Co., Ltd. | Tohmide 92 is a fatty polyamide resin in a brown-yellow pellet form. This product has a softening point of 115-125°C. Tohmide 92 is most commonly used in flexographic printing ink formulation applications. | |
Tohmide TXC-245A | Sanho Chemical Co., Ltd. | Tohmide TXC-245A is a solid-type polyamide resin in a brown-colored pellet form. This product has a viscosity of 1000-2000 mPa.s and a softening point of 85-95°C. Tohmide TXC-245A is most commonly used in heat transfer ink formulation applications. |