| H0905 | Long Kou Windstar Chemical Co., Ltd. | H0905 has heat resistance value of > 300 C and oil absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings. | |
| H0906 | Long Kou Windstar Chemical Co., Ltd. | H0906 has heat resistance value of > 300 C and oil absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings. | |
| Hydroxypropyl Aistarch Phosphate | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Hydroxypropyl Aistarch Phosphate is a fine white to off white powder with a characteristic odor. This product has good cutting resistance, good acid and alkali resistance, and high viscosity. It is used it as thickening agent in wallpaper adhesive. | |
| Leuco Crystal Violet | Eutec Chemical Co., Ltd. | Leuco Crystal Violet or Tris(4-dimethylaminophenyl) methane is a clear solution white crystalline powder. This product is used as an indicator dye for radiation-curable imaging systems. | |
| Lipotin® A | Evonik Operations GmbH, BL Coating Additives | Lipotin® A is a wetting and dispersing additive based on soya lecithin for waterborne formulations. It helps the wetting of the pigments and gives additional stabilization. | Request Sample |
| Lipotin® DB | Evonik Operations GmbH, BL Coating Additives | 用於溶劑型體系的潤濕和分散添加劑。 | Request Sample |
| Methyltriethoxysilane | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Methyltriethoxysilane is an industrial grade colorless, transparent liquid. It is used as water repellent to improve fillers dispersibility and reduces their sedimentation tendency. It can also be used as an important component for sol-gel coating, silico...展開 Methyltriethoxysilane is an industrial grade colorless, transparent liquid. It is used as water repellent to improve fillers dispersibility and reduces their sedimentation tendency. It can also be used as an important component for sol-gel coating, silicone resins and silicone rubber,silicone resins and silicone rubber. 收起 | |
| Methyltrimethoxysilane | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Methyltrimethoxysilane is a colorless, low-viscosity liquid, regarded as trifunctional since all three alkoxy groups are able to participate in this reaction. Additionally it contains a methyl group that adds organic character to the products. It is mainl...展開 Methyltrimethoxysilane is a colorless, low-viscosity liquid, regarded as trifunctional since all three alkoxy groups are able to participate in this reaction. Additionally it contains a methyl group that adds organic character to the products. It is mainly used as the crosslinking agent of room temperature vulcanized silicone rubber, as well as the glass fiber surface treatment agent and reinforced plastic laminate treatment agent, in order to improve the mechanical strength of products, heat resistance, moisture resistance. 收起 | |
| Modified Starch - Compound Active Printing Paste | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Modified Starch - Compound Active Printing Paste is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological pro...展開 Modified Starch - Compound Active Printing Paste is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holding water capacity, screening, dilution resistance, alkali and salt resistance. It also overcomes the disadvantages of the traditional sodium alginate printing paste in the printing process such as the low color yield and brilliance, bad screening and short retention time of the original paste. The performance/price ratio of this paste is much higher than the sodium alginate and it is the most advanced printing paste products at present. 收起 | |
| Modified Starch - High End | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Modified Starch - High End is ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holdi...展開 Modified Starch - High End is ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holding water capacity, screening, dilution resistance, alkali and salt resistance. It also overcomes the disadvantages of the traditional sodium alginate printing paste in the printing process such as the low color yield and brilliance, bad screening and short retention time of the original paste. 收起 | |
| Modified Starch - Mid Range | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Modified Starch - Mid Range is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, ...展開 Modified Starch - Mid Range is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holding water capacity, screening, dilution resistance, alkali and salt resistance. It also overcomes the disadvantages of the traditional sodium alginate printing paste in the printing process such as the low color yield and brilliance, bad screening and short retention time of the original paste. The performance/price ratio of this paste is much higher than the sodium alginate and it is the most advanced printing paste products at present. 收起 | |
| Nano Silver Powder TFNP-30 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Nano Silver Powder TFNP-30 is a moderate tap density,high dispersion, spherical nanometer silver powder. TFNP-30 is ideal for low-temperature sintering paste, low silver content and high conductive paste, and touchscreen slurry. | |
| Nano Silver Powder TFNP-80 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Nano Silver Powder TFNP-80 is a moderate tap density, nanoscale spherical monodisperse silver. It is mainly used as an additive material. | |
| NANOCRYL® C 130 | Evonik Operations GmbH, BL Coating Additives | NANOCRYL® C130是一種透明至微黃色液體，50%重量比，於環叁羥甲基丙烷縮甲醛丙烯酸酯中的二氧化矽納米顆粒。它可用於溶劑型和非溶劑型輻射固化配方中。它具有良好的柔韌性，可用於套印清漆和塑料面漆。該產品可增強耐劃傷和耐磨性，而不減少透明度。它具有對鋁/玻璃極好的附著力，降低固化收縮率和阻隔作用。它也對塑料有附著力，對填充劑配方有抗沉降效果和改進的汙垢脫落性能 | Request Sample |
| NANOCRYL® C 140 | Evonik Operations GmbH, BL Coating Additives | NANOCRYL® C140是一種透明至微黃色液體，二氧化矽納米顆粒50%重量比，混於己二醇二丙烯酸酯中。它具有良好的抗紫外線，高柔韌性，可用於溶劑型和無溶劑型輻射固化配方。它也適用於套印清漆和塑料面漆。本品具有增強的耐劃傷和耐磨損性，不會降低透明度。它對鋁/玻璃具有良好的附著力，可降低固化收縮率，以及具有阻隔效果。它還改善了汙垢脫落性。 | Request Sample |
| NANOCRYL® C 150 | Evonik Operations GmbH, BL Coating Additives | NANOCRYL®C 150是一種透明至微黃色液體，二氧化矽納米顆粒50%重量比，混於叁羥甲基丙烷（TMPTA）中。它可用於溶劑型和無溶劑型輻射固化配方。它具有高表面硬度和高交聯密度，可用於套印清漆和塑料面漆。本品具有增強的耐劃傷和耐磨損性，不會降低透明度。它對鋁/玻璃具有良好的附著力，可降低固化收縮率，以及具有阻隔效果。它還改善了汙垢脫落性和對塑料的附著力。 | Request Sample |
| NANOPOL® C 750 | Evonik Operations GmbH, BL Coating Additives | NANOPOL® C 750 shows very high performance in scratch- and abrasion-resistance without influencing the gloss or transparency of waterborne coatings. | Request Sample |
| NANOPOL® C 784 | Evonik Operations GmbH, BL Coating Additives | NANOPOL® C 784 shows the highest performance in scratch- and abrasion-resistance without influencing the gloss or transparency of the coating. | Request Sample |
| NANOPOX® C 620 | Evonik Operations GmbH, BL Coating Additives | NANOPOX® C 620 shows the highest performance in scratch- and abrasion-resistance without influencing the gloss or transparency of the cured cationic UV-coating. | Request Sample |
| ND-22 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | ND-22 is used as cross-linking agent for RTV Silicone Rubber and reinforcing for epoxy fiber glass reinforced plastics, viscosity increaser for synthetic resin and raw stuff fabric racked agent. | |
| Photocure 1100 | Eutec Chemical Co., Ltd. | Photocure 1100 is a pale yellow powder and an efficient photoinitiator suitable for imaging applications in color filter resists & resists for production of black matrix, column spacers, overcoats & passivation films of liquid crystal displays. However, ...展開 Photocure 1100 is a pale yellow powder and an efficient photoinitiator suitable for imaging applications in color filter resists & resists for production of black matrix, column spacers, overcoats & passivation films of liquid crystal displays. However, this product also has temperature process characteristics, absorption properties and exhibits curing performance in highly pigmented resist formulations with only a low concentration necessary. 收起 | |
| Photocure 2240 | Eutec Chemical Co., Ltd. | Photocure 2240 is a white to off-white crystalline powder of o-methyl benzoyl benzoate with a melting point between 48-54℃. This product is an odorless photosensitizer for UV-curable systems. | |
| Photocure 251 | Eutec Chemical Co., Ltd. | Photocure 251 is 4-Chlorobenzophenone and a white to off-white crystalline powder used as an odorless photosensitizer for UV-curable systems. This product has a melting point between 75-77℃. | |
| Photocure 2959 | Eutec Chemical Co., Ltd. | Photocure 2959 is a white powder and a non-yellowing photoinitiator for UV-curable systems. This product is commonly used when little odor is required and for water-borne UV-curable systems. In addition, an active hydroxyl group can be reacted with suita...展開 Photocure 2959 is a white powder and a non-yellowing photoinitiator for UV-curable systems. This product is commonly used when little odor is required and for water-borne UV-curable systems. In addition, an active hydroxyl group can be reacted with suitable functionalized unsaturated resins. 收起 | |
| Photocure 304 (BMS) | Eutec Chemical Co., Ltd. | Photocure 304 (BMS) is a white crystalline powder with a 73-85℃ melting point. This product is an efficient photoinitiator used in UV-curable printing inks, wood varnishes, decorative coatings for metal cans, clear lacquers, pigmented coatings. | |
| Photocure 369 | Eutec Chemical Co., Ltd. | Photocure 369 is a clear solution light yellow crystalline powder with a melting point between 110-119℃. This product is used an an efficient photoinitiator for non-white pigmented UV-curable systems. | |
| Photocure 393 | Eutec Chemical Co., Ltd. | Photocure 393 is a white crystalline powder of tribromomethyl phenylsulfone with a melting point of 142℃. This product is an efficient photoinitiator for photosensitive polymers which are used in PS plate, dry film resist, photo resist and other functions...展開 Photocure 393 is a white crystalline powder of tribromomethyl phenylsulfone with a melting point of 142℃. This product is an efficient photoinitiator for photosensitive polymers which are used in PS plate, dry film resist, photo resist and other functions. 收起 | |
| Photocure 400 | Eutec Chemical Co., Ltd. | Photocure 400 is an orange crystalline powder of 1,3-Bis(p-dimethylaminobenzylidene) acetone. This product is an efficient photosensitizer for a bimolecular visible light photosensitive imaging systems. It has a maximum absorption of 450 nm and can sensit...展開 Photocure 400 is an orange crystalline powder of 1,3-Bis(p-dimethylaminobenzylidene) acetone. This product is an efficient photosensitizer for a bimolecular visible light photosensitive imaging systems. It has a maximum absorption of 450 nm and can sensitize a photoinitiator to shift to 405 nm absorption. 收起 | |
| Photocure 4196 | Eutec Chemical Co., Ltd. | Photocure 4196 is a white to off-white crystalline flake of 4-Methylbenzophenone with a melting point between 55-57℃. This product is used as a photoinitiator for UV-cured coatings, inks & resists. | |
| Photocure 50 | Eutec Chemical Co., Ltd. | Photocure 50 or 2-Hydroxy-2-methyl-phenyl-propane-1-one is a clear solution light yellow and transparent liquid. This product is used as an efficient photoinitiator for UV-curable systems to provide non-yellowing. | |
| Photocure 51 | Eutec Chemical Co., Ltd. | Photocure 51 is benzil dimethylketal and a white crystalline solid. This product is a highly efficient photoinitiator for UV-curable systems. | |
| Photocure 550 | Eutec Chemical Co., Ltd. | Photocure 550 is a slightly yellow liquid of Methyl Benzoylformate. This product is an efficient photo initiator for UV-curable systems that provides non-yellowing durability and longer shelf life for UV-curable systems. | |
| Photocure 784 | Eutec Chemical Co., Ltd. | Photocure 784 is a yellow to orange powder with a melting point of 160-170℃. This product is an efficient photoinitiator for pigmented UV-curable systems, photoresists and printing plates | |
| Photocure 81 | Eutec Chemical Co., Ltd. | Photocure 81 is liquid benzophenone and a low viscosity clear and light yellow oily liquid photoinitiator at room temperature. This product has good efficiency, complete solubility and is easily combined making it useful for UV-curable systems to replace ...展開 Photocure 81 is liquid benzophenone and a low viscosity clear and light yellow oily liquid photoinitiator at room temperature. This product has good efficiency, complete solubility and is easily combined making it useful for UV-curable systems to replace Benzophenone, especially for formulations of UV inks & resists. 收起 | |
| Photocure 819 | Eutec Chemical Co., Ltd. | Photocure 819 is a yellow crystalline powder of Bis(2,4,6-trimethylbenzoyl)-phenylphosphineoxide. This product has a melting point between 127-133℃ and is used as an efficient photoinitiator for UV-curable systems. | |
| Photocure 84 | Eutec Chemical Co., Ltd. | Photocure 84 is a white crystalline powdered 1-Hydroxy cyclohexyl phenyl ketone and an efficient photoinitiator for UV-curable systems with non-yellowing durability and longer shelf life. This product has a 47-50℃ melting point and 0.5% max loss on drying...展開 Photocure 84 is a white crystalline powdered 1-Hydroxy cyclohexyl phenyl ketone and an efficient photoinitiator for UV-curable systems with non-yellowing durability and longer shelf life. This product has a 47-50℃ melting point and 0.5% max loss on drying. 收起 | |
| Photocure 900 (B-CIM) | Eutec Chemical Co., Ltd. | Photocure 900 (B-CIM) is a clear solution yellow crystalline powdered 2,2’-Bis-(2-Chlorophenyl)-4,5,4’,5’- tetraphenyl-2’H-biimidazolyl. It is used as a photoinitiator for photosensitive polymers in PS plate, dry film resist, photo resist and other functi...展開 Photocure 900 (B-CIM) is a clear solution yellow crystalline powdered 2,2’-Bis-(2-Chlorophenyl)-4,5,4’,5’- tetraphenyl-2’H-biimidazolyl. It is used as a photoinitiator for photosensitive polymers in PS plate, dry film resist, photo resist and other functions. 收起 | |
| Photocure 907 | Eutec Chemical Co., Ltd. | Photocure 907 is a clear solution white to off-white crystalline powder with a melting point between 72-75℃. This product is used as an efficient photoinitiator for pigmented UV-curable systems, photoresists and printing plates. | |
| Photocure 980 | Eutec Chemical Co., Ltd. | Photocure 980 is a white to off-white crystalline powder of 2,4,5-Triarylimidazole derivative. This product is an efficient photoinitiator for photosensitive polymers which are used in PS plate, dry film resist and photo resist. It is soluble in most or...展開 Photocure 980 is a white to off-white crystalline powder of 2,4,5-Triarylimidazole derivative. This product is an efficient photoinitiator for photosensitive polymers which are used in PS plate, dry film resist and photo resist. It is soluble in most organic solvents and contains a characteristic UV absorption that is more red-shifted to the radiation source of i-line than the conventional BCIM. 收起 | |
| Photocure 9PA | Eutec Chemical Co., Ltd. | Photocure 9PA is a yellow powder of 9-Phenylacridine. This product has a minimum melting point of 184℃ and an efficient photoinitiator for photosensitive polymers. | |
| Photocure DETX | Eutec Chemical Co., Ltd. | Photocure DETX is a yellow crystalline powder of 2,4-diethylthioxanthone and an efficient photoinitiator with a melting point between 65-75℃. This product is used for printing inks, wood varnishes, decorative coatings for metal cans and food cartons, adhe...展開 Photocure DETX is a yellow crystalline powder of 2,4-diethylthioxanthone and an efficient photoinitiator with a melting point between 65-75℃. This product is used for printing inks, wood varnishes, decorative coatings for metal cans and food cartons, adhesives, pressure transfer sheets and photo resists. 收起 | |
| Photocure EAB | Eutec Chemical Co., Ltd. | Photocure EAB is a light yellow to light yellow-green crystalline powder with a minimum melting point of 92℃. This product is an efficient photosensitizer used in UV-cured inks and resists. | |
| Photocure EAQ | Eutec Chemical Co., Ltd. | Photocure EAQ is a light yellow crystalline powder or flake of 2-Ethylanthraquinone with a melting point between 107-111℃. This product is an efficient photoinitiators for photosensitive polymers. | |
| Photocure EDB | Eutec Chemical Co., Ltd. | Photocure EDB or Ethyl 4-N,N-dimethylaminobenzoate is a clear solution white crystalline powder used as an efficient photoactivator. When this product is used in combination with other photoinitiators it can convert energy transfer into free radicals and...展開 Photocure EDB or Ethyl 4-N,N-dimethylaminobenzoate is a clear solution white crystalline powder used as an efficient photoactivator. When this product is used in combination with other photoinitiators it can convert energy transfer into free radicals and start photopolymerization of suitable resin formulations. 收起 | |
| Photocure EHDB | Eutec Chemical Co., Ltd. | Photocure EHDB or 2-Ethylhexyl-4-N,N-dimethylamino-benzoate is a pale yellow clear liquid used as an efficient photoactivator. When this product is used in combination with other photoinitiators it can convert energy transfer into free radicals and start ...展開 Photocure EHDB or 2-Ethylhexyl-4-N,N-dimethylamino-benzoate is a pale yellow clear liquid used as an efficient photoactivator. When this product is used in combination with other photoinitiators it can convert energy transfer into free radicals and start photopolymerization of suitable resin formulations. 收起 | |
| Photocure IDB | Eutec Chemical Co., Ltd. | Photocure IDB is a pale yellow liquid of Isoamyl 4-N,N-dimethylaminobenzoate. This product is an efficient photoactivator which can be used with photoinitiators to convert energy transfer intro free radicals and initiate photopolymerization of suitable re...展開 Photocure IDB is a pale yellow liquid of Isoamyl 4-N,N-dimethylaminobenzoate. This product is an efficient photoactivator which can be used with photoinitiators to convert energy transfer intro free radicals and initiate photopolymerization of suitable resin formulations. 收起 | |
| Photocure ITX-P | Eutec Chemical Co., Ltd. | Photocure ITX-P is a yellow crystalline powder of 2-Isopropylthioxanthone with a melting point between 70-76℃. This product is an efficient photoinitiator for printing inks, wood varnishes, decorative coatings for metal cans and food cartons, adhesives a...展開 Photocure ITX-P is a yellow crystalline powder of 2-Isopropylthioxanthone with a melting point between 70-76℃. This product is an efficient photoinitiator for printing inks, wood varnishes, decorative coatings for metal cans and food cartons, adhesives and pressure transfer sheets. 收起 | |
| Photocure PDO | Eutec Chemical Co., Ltd. | Photocure PDO is a white crystalline powder of 1-Phenyl-1,2-propanedione-2-(O-ethoxycarboxy)oxime. This product is an efficient photoinitiator for photosensitive polymers which are used in dark system of UV curing inks. | |
| Photocure TAZ-110 | Eutec Chemical Co., Ltd. | Photocure TAZ-110 is a yellow powder of 2,4-Bis(trichloromethyl)-6-(p-methoxystyryl)-s-triazine with a melting point between 190-193°C. This product is an efficient photoacid generator for UV-curable systems such as ink, adhesives and photo resists for di...展開 Photocure TAZ-110 is a yellow powder of 2,4-Bis(trichloromethyl)-6-(p-methoxystyryl)-s-triazine with a melting point between 190-193°C. This product is an efficient photoacid generator for UV-curable systems such as ink, adhesives and photo resists for display materials. 收起 | |
| Photocure TAZ-250 | Eutec Chemical Co., Ltd. | Photocure TAZ-250 (2-[4’-Ethyl(1,1’-biphenyl)-4-yl]-4,6-bis(trichloromethyl)-1,3,5-triazine) is a pale yellow to yellow powder with a melting point between 140-144°C. This product is an efficient photoacid generator for UV-curable systems such as ink, adh...展開 Photocure TAZ-250 (2-[4’-Ethyl(1,1’-biphenyl)-4-yl]-4,6-bis(trichloromethyl)-1,3,5-triazine) is a pale yellow to yellow powder with a melting point between 140-144°C. This product is an efficient photoacid generator for UV-curable systems such as ink, adhesives and photo resists for display materials. 收起 | |
| Photocure TPO | Eutec Chemical Co., Ltd. | Photocure TPO is a clear solution yellow crystalline powder of 2,4,6-trimethylbenzoyldiphenylphosphine oxide with a melting point between 87-93℃. This product is used as an efficient photoinitiator for UV-curable systems. | |
| Photocure TPO-L | Eutec Chemical Co., Ltd. | Photocure TPO-L is a clear solution yellow liquid of Ethyl (2,4,6-trimethylbenzoyl)phenylphosphinate. This product is used as an efficient photoinitiator for UV-curable systems. | |
| Photocure TZT | Eutec Chemical Co., Ltd. | Photocure TZT (2,4,6-Trimethylbenzophenone Methyl benzophenone Benzophenone) is a pale yellow odorless liquid. This product is used as a photoinitiator in UV-cured resins, inks and coatings. | |
| Precipitated Silica | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Precipitated silica is a relatively pure form of the mineral silica, which is produced by the chemical process known as precipitation. In chemical precipitation, a solid forms from a liquid due to a chemical reaction. Precipitated silica is formed by mixi...展開 Precipitated silica is a relatively pure form of the mineral silica, which is produced by the chemical process known as precipitation. In chemical precipitation, a solid forms from a liquid due to a chemical reaction. Precipitated silica is formed by mixing solutions of sodium silicate with sulfuric acid in water. A chemical reaction occurs, and pellets of pure silica form. 收起 | |
| PVB | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Polyvinyl butyral (PVB) with hydrochloric acid as catalyst, is made from polyvinyl alcohol and butyl aldehyde. The abbreviate is PVB. High gloss, high transparent, non-toxic, smell-less, fast dissolve, etc. It’s good soluble with pigments and dyes. The PV...展開 Polyvinyl butyral (PVB) with hydrochloric acid as catalyst, is made from polyvinyl alcohol and butyl aldehyde. The abbreviate is PVB. High gloss, high transparent, non-toxic, smell-less, fast dissolve, etc. It’s good soluble with pigments and dyes. The PVB has high transparency, good cold resistance, water resistance, film forming properties and impact resistance, widely used in middle film of glass, ceramic flower paper, metal protective paint, tipping paper, aluminum foil, insulation paint, fiber treatment agent, finished parts, printing inks, dyes and so on. 收起 | |
| PVC Paste | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | PVC Paste is the most widely raw material used in plastic production. It has good chemical stability corrosion resistance and water resistance. It can be dissolved in acetone , hydrochloric ether, ester and some alcohol . It can offer good solubility , go...展開 PVC Paste is the most widely raw material used in plastic production. It has good chemical stability corrosion resistance and water resistance. It can be dissolved in acetone , hydrochloric ether, ester and some alcohol . It can offer good solubility , good electrical insulation , thermoplasticity and membrane forming capacity. They are essential materials for preparing PVC compounds. By adding blending agents and employing different techniques, they can be made into rigid or non-rigid PVC products and are suppliable in a wide range of transparent, translucent, and opaque colours. 收起 | |
| REWOPAL® M 365 | Evonik Operations GmbH, BL Coating Additives | REWOPAL® M 365 is a non-ionic wetting and dispersing additive for waterborne formulations. Helps the wetting of organic pigment. Can be used as co-disprsant in base paints. | Request Sample |
| SCA-Y25E | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | SCA-Y25E (3-Isocyanatopropyltriethoxysilane) is unique isocyanate functional silane.The isocyanate functionality exhibits the typical reactivity of an alkyl isocyanate and will react with most reactive hydrogen containing compounds.The silane portion of t...展開 SCA-Y25E (3-Isocyanatopropyltriethoxysilane) is unique isocyanate functional silane.The isocyanate functionality exhibits the typical reactivity of an alkyl isocyanate and will react with most reactive hydrogen containing compounds.The silane portion of these products can then crosslink with each other or be used to adhere to a variety of substrates. SCA-Y25E can be used in a number of applications. 收起 | |
| SCA-Y25M | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | SCA-Y25M (3-Isocyanatopropyltrimethoxysilane) is a unique isocyanate functional silane.The isocyanate functionality exhibits the typical reactivity of an alkyl isocyanate and will react with most reactive hydrogen containing compounds.The silane portion o...展開 SCA-Y25M (3-Isocyanatopropyltrimethoxysilane) is a unique isocyanate functional silane.The isocyanate functionality exhibits the typical reactivity of an alkyl isocyanate and will react with most reactive hydrogen containing compounds.The silane portion of these products can then crosslink with each other or be used to adhere to a variety of substrates. It can be used in a number of applications. 收起 | |
| Silane ATPN-1100 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Silane ATPN-1100 is a versatile amino-functional coupling agent used over a broad range of applications to provide superior bonds between inorganic substrates and organic polymers. The silicon-containing portion of the molecule provides strong bonding to ...展開 Silane ATPN-1100 is a versatile amino-functional coupling agent used over a broad range of applications to provide superior bonds between inorganic substrates and organic polymers. The silicon-containing portion of the molecule provides strong bonding to substrates. The primary amine function reacts with a wide array of thermoset, thermoplastic, and elastomeric materials. 收起 | |
| Silane ATPN-1110 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Silane ATPN-1110 is an amino-functional silane that may be used over a broad range of applications to give an improvement in the bond between a substrate, filler or reinforcement and resins that react with the amino group. It can improve the dispersion an...展開 Silane ATPN-1110 is an amino-functional silane that may be used over a broad range of applications to give an improvement in the bond between a substrate, filler or reinforcement and resins that react with the amino group. It can improve the dispersion and wet ability of filler in the high molecular materials. ATPN-1110 is an excellent promoter of adhesion and sealant (such as polyurethane, epoxy, and phenol). In the glass wool and FRP products, it can be added into phenol resins to improve the wet resistance and mechanical performance. 收起 | |
| Silane ATPN-1120 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Silane ATPN-1120 is a clear, colorless, strongly alkaline liquid with smell being very sensitive to hydrolysis. The chloride content ranges in the lower ppm-level. ATPN-1120 is used as adhesion promoter at organic/inorganic interfaces, for modification of...展開 Silane ATPN-1120 is a clear, colorless, strongly alkaline liquid with smell being very sensitive to hydrolysis. The chloride content ranges in the lower ppm-level. ATPN-1120 is used as adhesion promoter at organic/inorganic interfaces, for modification of surfaces (corrosion prevention, component of primers) or silicone-polymers or as crosslinker (moisture crosslinking of polymers). The application as“coupling agent”leads in general to an improvement of mechanical and electrical product properties above all under exposure to heat and/or moisture. 收起 | |
| Silane Coupling Agent Si-69 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Silane Coupling Agent Si-69 is a kind of multifunctional silane coupling agent that has been used successfully in the rubber industry. It is used to improve physical and mechanical properties of vulcanizates. It is able to markedly improve tensile strengt...展開 Silane Coupling Agent Si-69 is a kind of multifunctional silane coupling agent that has been used successfully in the rubber industry. It is used to improve physical and mechanical properties of vulcanizates. It is able to markedly improve tensile strength, tearing strength and abrasive resistance and reduce compression set of vulcanizates. In addition, it can reduce the viscosity and improve the processability of rubber products. Si-69 is especially suitable to improve the reinforcing properties of fillers that contain hydroxyl groups in all unsaturated polymers having double bonds or their blends. 收起 | |
| SILICONE FLUID ATPN-100 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | SILICONE FLUID ATPN-100 is a linear, non-reactive polydimethylsiloxane with a viscosity of approx. 100 mm2 /s. Due to its chemical structure, it has an outstanding property profile, which sets it apart from organic materials such as mineral oils. SILICON...展開 SILICONE FLUID ATPN-100 is a linear, non-reactive polydimethylsiloxane with a viscosity of approx. 100 mm2 /s. Due to its chemical structure, it has an outstanding property profile, which sets it apart from organic materials such as mineral oils. SILICONE FLUID ATPN-100 is ideal for use in a wide range of applications. 收起 | |
| SILICONE FLUID ATPN-1000 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | SILICONE FLUID ATPN-1000 is a linear, non-reactive polydimethylsiloxane with a viscosity of approx. 1 000 mm2/s. Due to its chemical structure, it has an outstanding property profile, which sets it apart from organic materials such as mineral oils. SILICO...展開 SILICONE FLUID ATPN-1000 is a linear, non-reactive polydimethylsiloxane with a viscosity of approx. 1 000 mm2/s. Due to its chemical structure, it has an outstanding property profile, which sets it apart from organic materials such as mineral oils. SILICONE FLUID ATPN-1000 is ideal for use in a wide range of applications. 收起 | |
| SILIKOFTAL® HTF MPA/MBA | Evonik Operations GmbH, BL Coating Additives | SILIKOFTAL® HTF MPA/MBA is a methoxy-functional silicone polyester resin. It shows high flexibility and low thermoplasticity. The product can be used in compliance with FDA 175.300 and BfR XV. | Request Sample |
| SILIKOFTAL® HTL | Evonik Operations GmbH, BL Coating Additives | SILIKOFTAL® HTL is a methoxy-functional silicone polyester resin. | Request Sample |
| SILIKOFTAL® HTL 1 | Evonik Operations GmbH, BL Coating Additives | SILIKOFTAL® HTL 1 is a methoxy-functional silicone polyester resin. It is a cost-efficient resin with excellent adhesion to aluminum, steel, and stainless steel. The product can be used in compliance with FDA 175.300 and BfR XV. | Request Sample |
| SILIKOFTAL® HTL 3/MPA | Evonik Operations GmbH, BL Coating Additives | SILIKOFTAL® HTL 3/MPA is a methoxy-functional silicone polyester resin. It shows an extraordinary yellowing resistance up to 250°C and a very good boiling water resistance. The product can be used in compliance with FDA 175.300 and BfR XV. | Request Sample |
| SILIKOFTAL® HTT | Evonik Operations GmbH, BL Coating Additives | 用於生產耐熱裝飾涂料的溶劑型主體樹脂。 | Request Sample |
| SILIKOFTAL® NON-STICK 60 | Evonik Operations GmbH, BL Coating Additives | SILIKOFTAL® NON-STICK 60 is an ethoxy-functional silicone polyester resin for release coatings. The product can be used in compliance with FDA 175.300 and BfR XV. | Request Sample |
| SILIKOPHEN® AC 1000 | Evonik Operations GmbH, BL Coating Additives | SILIKOPHEN® AC 1000 is a low viscosity, solvent free methoxy-functional silicone resin. It offers curing at ambient temperature by catalysis and entering of humidity via a hydrolysis/condensation reaction. This product is suitable for anti-corrosion coati...展開 SILIKOPHEN® AC 1000 is a low viscosity, solvent free methoxy-functional silicone resin. It offers curing at ambient temperature by catalysis and entering of humidity via a hydrolysis/condensation reaction. This product is suitable for anti-corrosion coatings, depending on the formulation. SILIKOPHEN® AC 1000 is recommended for high temperature applications for industrial facilities, power plants, incinerating plants, ventilators, turbines, silencers, ovens, chimneys, oven inserts, barbeques, and electric and gas heaters. 收起 | Request Sample |
| SILIKOPHEN® AC 900 | Evonik Operations GmbH, BL Coating Additives | SILIKOPHEN® AC 900 is a low viscosity methoxy-functional methyl phenylsilicone resin. It cures at ambient temperature by catalysis and entering of humidity via a hydrolysis/condensation reaction. It also features low smoke and odor development of the comp...展開 SILIKOPHEN® AC 900 is a low viscosity methoxy-functional methyl phenylsilicone resin. It cures at ambient temperature by catalysis and entering of humidity via a hydrolysis/condensation reaction. It also features low smoke and odor development of the completely cured coating at temperature load. This product is suitable for anti-corrosion coatings for high temperature applications for industrial facilities, power plants, incinerating plants, ventilators, turbines, silencers, ovens, chimneys, oven inserts, barbeques, and electric and gas heaters. 收起 | Request Sample |
| SILIKOPHEN® P 40/W | Evonik Operations GmbH, BL Coating Additives | 用於耐熱、抗腐蝕油漆的水性主體樹脂。 | Request Sample |
| SILIKOPHEN® P 50/X | Evonik Operations GmbH, BL Coating Additives | 用於耐熱抗腐蝕油漆的溶劑型主體樹脂。 | Request Sample |
| SILIKOPHEN® P 80/X | Evonik Operations GmbH, BL Coating Additives | 用於耐熱抗腐蝕油漆的溶劑型主體樹脂。 | Request Sample |
| SILIKOPHEN® P80/MPA | Evonik Operations GmbH, BL Coating Additives | SILIKOPHEN® P80/MPA is a non-reactive methyl phenyl silicone resin. It is solvent-borne, good air-drying, and contains non aromatic solvents (BTX) variants. For low VOC formulations. | Request Sample |
| SILIKOPON® EF | Evonik Operations GmbH, BL Coating Additives | SILIKOPON® EF is a silicone-epoxy resin for high temperature resistant corrosion protection coatings. It is a stoving resin and is distinguished by good adhesion and resistance to solvents. It can be used on concrete walls and floors and for roof tile, pi...展開 SILIKOPON® EF is a silicone-epoxy resin for high temperature resistant corrosion protection coatings. It is a stoving resin and is distinguished by good adhesion and resistance to solvents. It can be used on concrete walls and floors and for roof tile, pipe lining, and commercial transport coatings. Some special features of SILIKOPON® EF includes extraordinary gloss retention and weather resistance, an anti-graffiti effect, excellent corrosion resistance, and is suitable for ultra high solids coatings. 收起 | Request Sample |
| SILIKOPUR® 8081 | Evonik Operations GmbH, BL Coating Additives | 硅改性的聚氨酯乳液，其特點為可產生水珠效果，用於皮革面漆手感滑，極高的柔韌性、良好的重涂性能、良好的自干性、高相容性和可用水稀釋 | Request Sample |
| SILIKOTOP® E 900 | Evonik Operations GmbH, BL Coating Additives | SILIKOTOP® E 900 is a branched hydroxyfunctional high-solid silicone-polyester. It is recommended for formulations with very low VOC content, < 250 g/L. It has a low processing viscosity at a very low solvent demand. It also has excellent stone-chipping a...展開 SILIKOTOP® E 900 is a branched hydroxyfunctional high-solid silicone-polyester. It is recommended for formulations with very low VOC content, < 250 g/L. It has a low processing viscosity at a very low solvent demand. It also has excellent stone-chipping and impact resistance, excellent appearance, and good pigment affinity, chemical resistance, and weather resistance. 收起 | Request Sample |
| SILIKOTOP® E 901 | Evonik Operations GmbH, BL Coating Additives | SILIKOTOP® E 901 is a branched hydroxyfunctional high-solid silicone-polyester. It is recommended for formulations with very low VOC content, < 250 g/L. It has a low processing viscosity at a very low solvent demand. It also has excellent stone-chipping a...展開 SILIKOTOP® E 901 is a branched hydroxyfunctional high-solid silicone-polyester. It is recommended for formulations with very low VOC content, < 250 g/L. It has a low processing viscosity at a very low solvent demand. It also has excellent stone-chipping and impact resistance, excellent appearance, and good pigment affinity, chemical resistance, and weather resistance. 收起 | Request Sample |
| SIPERNAT® 622 LS | Evonik Operations GmbH, BL Coating Additives | SIPERNAT® 622 LS is an untreated, finely ground silica. This specialty silica provides good matting efficiency with minimal viscosity increase in printing ink applications. | Request Sample |
| SIPERNAT® 800 | Evonik Operations GmbH, BL Coating Additives | SIPERNAT® 800 is a precipitated synthetic sodium aluminosilicate that is manufactured in the USA. It is a versatile, cost-effective titanium dioxide extender for paints and coatings applications. | Request Sample |
| SIPERNAT® 820 A | Evonik Operations GmbH, BL Coating Additives | SIPERNAT® 820 A is a sodium aluminium silicate. It is produced by a special precipitation and drying process and is employed as a partial replacement for titanium dioxide. | Request Sample |
| SIPERNAT® 833 | Evonik Operations GmbH, BL Coating Additives | SIPERNAT® 833 is a precipitated synthetic sodium aluminosilicate. It is a versatile, cost-effective titanium dioxide extender for paints and coatings applications. | Request Sample |
| SIPERNAT® 835 | Evonik Operations GmbH, BL Coating Additives | SIPERNAT® 835 is a precipitated synthetic sodium magnesium aluminosilicate that can be effective as a titanium dioxide extender for paints and coatings applications. It has proven particularly useful in high PVC formulations based on VAE or vinyl acrylic ...展開 SIPERNAT® 835 is a precipitated synthetic sodium magnesium aluminosilicate that can be effective as a titanium dioxide extender for paints and coatings applications. It has proven particularly useful in high PVC formulations based on VAE or vinyl acrylic binders. 收起 | Request Sample |
| SIPERNAT® 898 | Evonik Operations GmbH, BL Coating Additives | SIPERNAT® 898 is a precipitated synthetic sodium aluminosilicate. It is a versatile, cost-effective titanium dioxide extender for paints and coatings applications. | Request Sample |
| SPHERILEX® DP-0110 | Evonik Operations GmbH, BL Coating Additives | SPHERILEX® DP-0110 has the smallest particle size within the SPHERILEX® family of products, making it ideal for thin film applications or systems where smaller particle-sized pigments are preferred to promote surface smoothness and higher 85-degree gloss....展開 SPHERILEX® DP-0110 has the smallest particle size within the SPHERILEX® family of products, making it ideal for thin film applications or systems where smaller particle-sized pigments are preferred to promote surface smoothness and higher 85-degree gloss. In particular, SPHERILEX® DP-0110 is ideal for achieving burnish-and scrub-resistant satin and eggshell finishes, and, when used in combination with silica matting agents, can enable deep matte, natural-looking wood coatings that have improved scratch, burnish, and mar resistance. It can also significantly improve the hardness of coil coatings. 收起 | Request Sample |
| SPHERILEX® DP-0111 | Evonik Operations GmbH, BL Coating Additives | SPHERILEX® DP-0111 is a precipitated amorphous (crystalline free) silica with unique spherical particle shape and very narrow particle size distribution. | Request Sample |
| SPHERILEX® DP-0112 | Evonik Operations GmbH, BL Coating Additives | SPHERILEX® DP-0112 is a precipitated amorphous (crystalline-free) silica with uniquely spherical particle shape and very narrow particle size distribution. | Request Sample |
| SPHERILEX® DP-0115 | Evonik Operations GmbH, BL Coating Additives | SPHERILEX® DP-0115 is a precipitated amorphous (crystalline-free) silica with uniquely spherical particle shape and very narrow particle size distribution. | Request Sample |
| SURFYNOL® 104 | Evonik Operations GmbH, BL Coating Additives | A nonionic surfactant that has multifunctional benefits, including wetting and foam control, in aqueous systems. 100% active solid. | Request Sample |
| SURFYNOL® 104 A | Evonik Operations GmbH, BL Coating Additives | SURFYNOL® 104 A is a multifunctional surfactant providing combined dynamic wetting and molecular defoaming in waterborne coatings and inks. | Request Sample |
| SURFYNOL® 104 BC | Evonik Operations GmbH, BL Coating Additives | SURFYNOL® 104 BC is a multifunctional surfactant providing combined dynamic wetting and molecular defoaming in waterborne coatings and inks. | Request Sample |
| Surfynol® 104 DPM | Evonik Operations GmbH, BL Coating Additives | 非離子型表面活性劑，具有多種功能，包括潤濕和泡沫控制，適合水性體系。含50%活性物的液體，溶於二丙二醇單甲醚 | Request Sample |
| Surfynol® 104 E | Evonik Operations GmbH, BL Coating Additives | 非離子型表面活性劑，具有多種功能，包括潤濕和泡沫控制，適合水性體系。含50%活性物的液體，溶於乙二醇 | Request Sample |
| Surfynol® 104 H | Evonik Operations GmbH, BL Coating Additives | 是一種非離子型表面活性劑，具有很多優點，包括潤濕和泡沫控制，適用於水性體系。75%活性物液體溶於乙二醇 | Request Sample |
| Surfynol® 104 PA | Evonik Operations GmbH, BL Coating Additives | 非離子型表面活性劑，具有多種功能，包括潤濕和泡沫控制，適合水性體系。含50%活性物的液體，溶於異丙醇 | Request Sample |
| Surfynol® 104 PG 50 | Evonik Operations GmbH, BL Coating Additives | 非離子型表面活性劑，具有多種功能，包括潤濕和泡沫控制，適合水性體系。含50%活性物的液體，溶於丙二醇 | Request Sample |
| SURFYNOL® 104 S | Evonik Operations GmbH, BL Coating Additives | SURFYNOL® 104 S is a free-flowing powder surfactant providing non yellowing and degassing for powder coatings. | Request Sample |
