| ADDITOL® XW 376 | Allnex | 消泡劑，用於水性乳膠漆和膠粘劑以及合成樹脂膠結抹灰 | Request Sample |
| ADDITOL® XW 390 | Allnex | Additol® XW 390 is a flow and wetting agent without silicone addition for waterborne coating systems. It prevents flow defects in all waterborne coating systems and promotes substrate wetting. | Request Sample |
| ADDITOL® XW 393 | Allnex | 消泡劑，用於水性油漆體系，無硅添加劑 | Request Sample |
| ADDITOL® XW 395 | Allnex | 流平，潤濕和防發花助劑，用於水性油漆體系 | Request Sample |
| ADDITOL® XW 6528 | Allnex | 可水稀釋，改性聚酯-丙烯酸酯樹脂 | Request Sample |
| ADDITOL® XW 6532 | Allnex | Additol® XW 6532 is a water based highly efficient dispersing additive for organic - and carbon black pigments. It is recommended to be used as dispersant for the production of waterborne colorants. | Request Sample |
| ADDITOL® XW 6533 | Allnex | 不含鈷的催干劑，可用於水基醇酸樹脂涂料中。 | Request Sample |
| ADDITOL® XW 6535 | Allnex | 為水基及溶劑基低VOC體系設計的研磨用醇酸樹脂。 | Request Sample |
| ADDITOL® XW 6544 | Allnex | Additol® XW 6544 is a low-VOC defoamer based on hydrophobic modified polymers, without silicone addition. It prevents foam formation and reduces pinholes in high film thickness due to optimized reflow properties. | Request Sample |
| ADDITOL® XW 6565 | Allnex | ADDITOL®XW 6565是一種獨特的多官能團萬能碾磨媒介，專門設計用於性能優化的溶劑基，水基和所有低VOC裝飾塗料。特殊的成分帶來的優點，如優異的顯色，粘度控制和對所有的建築顏料穩定，以及改善的濕度和耐水性性能。 | Request Sample |
| ADDITOL® XW 6567 | Allnex | Additol® XW 6567 is a Food Contact Compliant Defoamer for waterborne epoxy/phenolic systems used in B&B, DWI, General line containers, Caps, Closures and Aerosol industry. It is recommended for use in spray applied repair coatings applied to seal defects ...展開 Additol® XW 6567 is a Food Contact Compliant Defoamer for waterborne epoxy/phenolic systems used in B&B, DWI, General line containers, Caps, Closures and Aerosol industry. It is recommended for use in spray applied repair coatings applied to seal defects formed during the mechanical crimping process. It is also recommended in all other coating types requiring food compliance with EU and/or US regulations. 收起 | Request Sample |
| ADDITOL® XW 6569 | Allnex | ADDITOL® XW 6569 is a modified silicone based defoamer. It is emulsifier-free with no influence on rheology modifiers and resin stability. This highly effective defoamer is easy to incorporate into all waterborne paint systems. | Request Sample |
| ADDITOL® XW 6580 | Allnex | ADDITOL® XW 6580 flow/leveling/levelling- is a leveling and substrate wetting agent based on a polyether modified siloxane for waterborne and solventborne paint systems. Strong surface tension reduction improves substrate wetting and leveling without foam...展開 ADDITOL® XW 6580 flow/leveling/levelling- is a leveling and substrate wetting agent based on a polyether modified siloxane for waterborne and solventborne paint systems. Strong surface tension reduction improves substrate wetting and leveling without foam stabilization. 收起 | Request Sample |
| ADDITOL® XW 6581 | Allnex | ADDITOL® XW 6581 -dispersants/colorants/pigment pastes/concentrates/wetting- is an ionic and nonionic surfactant with pigment affinity groups for organic and inorganic pigments in waterborne coating systems. | Request Sample |
| ADDITOL® XW 6584 | Allnex | ADDITOL® XW 6584 is an easy to incorpoate defoamer with good compatibility in all waterborne systems. | Request Sample |
| ADDITOL® XW 6585 | Allnex | ADDITOL® XW 6585 is an easy to incorpoate defoamer with good compatibility in all waterborne systems. | Request Sample |
| ADDITOL® XW 6586 | Allnex | ADDITOL® XW 6585 is a very versatile polysiloxane based surface additive that can be used in a wide range of liquid industrial and architectural coatings as well a in printing inks and overprint varnishes based on radiation curing technology. It can be us...展開 ADDITOL® XW 6585 is a very versatile polysiloxane based surface additive that can be used in a wide range of liquid industrial and architectural coatings as well a in printing inks and overprint varnishes based on radiation curing technology. It can be used in systems where FDA approval is needed. 收起 | Request Sample |
| ADDITOL® XW 6588 | Allnex | ADDITOL® XW 6588 is special designed "low ion migration" technology based dispersant for organic and inorganic pigments as well as extenders. It can be used as direct grinding or pigment slurry dispersant. | Request Sample |
| ADDITOL® XW 6591 | Allnex | ADDITOL® XW 6591 is a water dilutable, modified polyester-acrylate polymer. It can be used for colour- and shading pigment pastes. It is compatible with waterborne air-drying and stoving alkyds, waterborne acrylic resins, UV- curing systems, PU- dispersio...展開 ADDITOL® XW 6591 is a water dilutable, modified polyester-acrylate polymer. It can be used for colour- and shading pigment pastes. It is compatible with waterborne air-drying and stoving alkyds, waterborne acrylic resins, UV- curing systems, PU- dispersions and plastic dispersions. 收起 | Request Sample |
| Alkylsulfonic Acid Ester of Phenol Plasticizer | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Alkylsulfonic acid ester of phenol is a common environmental friendly plasticizer.It possess excellent plasticizing and saponifying effect are suitable for various types of polymers such as PU and PVC. | |
| ALNOVOL® PN 160 | Allnex | 非自固化線性酚醛樹脂，用於橡膠補強 | Request Sample |
| ALNOVOL® PN 320/PAST | Allnex | 非自固化線性酚醛樹脂，用於橡膠補強。用於抗汽油涂料，密封劑和電絕緣清漆 | Request Sample |
| ALNOVOL® PN 650/60B | Allnex | ALNOVOL PN 650/60B is designed to act as a modifier of heat curable phenolic/polyester resin combinations (BADGE-free & BPA-NI systems) and phenolic/epoxy resin formulas. An addition of 20 - 40% of ALNOVOL PN 650/60B as solid on total dry film solid impro...展開 ALNOVOL PN 650/60B is designed to act as a modifier of heat curable phenolic/polyester resin combinations (BADGE-free & BPA-NI systems) and phenolic/epoxy resin formulas. An addition of 20 - 40% of ALNOVOL PN 650/60B as solid on total dry film solid improves the flexibility of the coating by maintaining the chemical resistance. Positive effects in regards to leveling and substrate adhesion could be observed as well. Application areas are the interior and exterior layer of metal packaging goods like collapsibletubes,cans and drums for water,oils and food. 收起 | Request Sample |
| ALNOVOL® PN 760 | Allnex | ALNOVOL® PN 760/PAST is a non self-crosslinking modified phenol novolac. The resin is used in rubber compounds as adhesion promoter for steel and textile cord. Alnovol® PN 760 is incorporated into the mix in the first stage of compounding. Due to the low ...展開 ALNOVOL® PN 760/PAST is a non self-crosslinking modified phenol novolac. The resin is used in rubber compounds as adhesion promoter for steel and textile cord. Alnovol® PN 760 is incorporated into the mix in the first stage of compounding. Due to the low content of free phenol processing does not generate any vapors and it is not accompanied by odorous annoyance. 收起 | Request Sample |
| ALNOVOL® UF 410 RPC | Allnex | ALNOVOL® UF 410 RPC is a carbamic resin on silica. It is compatible with most of the synthetic and natural rubbers. Due to the silica carrier in solvents, no clear solution is possible. | Request Sample |
| AQUAGUARD™ CLEAR GELCOAT | Allnex | AQUAGUARD Clear Gelcoat is a pre-promoted thixotropic spray grade gelcoat developed primarily for use in sanitaryware applications. Aquaguard Clear Gelcoat is a premium product that is highly durable and exhibits excellent weathering and chemical resistan...展開 AQUAGUARD Clear Gelcoat is a pre-promoted thixotropic spray grade gelcoat developed primarily for use in sanitaryware applications. Aquaguard Clear Gelcoat is a premium product that is highly durable and exhibits excellent weathering and chemical resistance properties. 收起 | Request Sample |
| AQUAGUARD® XA DOVE GREY | Allnex | AQUAGUARD® XA POOL GELCOATS are high performance finishes for the production of FRP composite Swimming Pools. AQUAGUARD®XA POOL gelcoats are highly durable, and exhibit outstanding UV, weathering and chemical resistance properties, in this demanding outdo...展開 AQUAGUARD® XA POOL GELCOATS are high performance finishes for the production of FRP composite Swimming Pools. AQUAGUARD®XA POOL gelcoats are highly durable, and exhibit outstanding UV, weathering and chemical resistance properties, in this demanding outdoor application. 收起 | Request Sample |
| AQUAGUARD® XH AZURE BLUE | Allnex | AQUAGUARD® XH GELCOATS are high performance, hybrid, cosmetic finishes for the production of FRP composite materials intended for service in demanding indoor and outdoor applications | Request Sample |
| AQUAPOL™ 102S | Allnex | AQUAPOL™ 102S is an aqueous dispersion of a styrene acrylic copolymer. It is recommended for 2 pack cementitious based waterproofing membranes for internal wet areas prior to tiling and general purpose gap fillers. | Request Sample |
| AQUAPOL™ 370S | Allnex | AQUAPOL™ 370S is a high solids styrene acrylic for 2 pack cementitious based water proofing membranes and coatings, both internal and exterior applications. | Request Sample |
| BECKOCOAT® PU 428/51XMPAC | Allnex | Beckocoat® PU 428/51XMPAC is a light stabilized, oil-free, moisture curing one-component polyurethane resin. It's used in floor sealers, wood coating, concrete impregnation, and as crosslinkers for alkyd resins in two-component systems. | Request Sample |
| BECKOCOAT® VPU 4204/40LG | Allnex | Beckocoat® VPU 4204/40LG is a flat, moisture curing one-component polyurethane resin. It's used for floor sealers, wood paints and concrete impregnation sealers. | Request Sample |
| BECKOCURE™ EH 2100w/44WA | Allnex | BECKOCURE™ EH 2100w/44WA is an amine-hardener dispersion, particularly suitable for the formulation of waterborne 2K-epoxy coatings for concrete and metal, free of volatile amines and solvents. In combination with epoxy dispersions or suitable liquid epox...展開 BECKOCURE™ EH 2100w/44WA is an amine-hardener dispersion, particularly suitable for the formulation of waterborne 2K-epoxy coatings for concrete and metal, free of volatile amines and solvents. In combination with epoxy dispersions or suitable liquid epoxy resins, fast drying coatings with an excellent performance can be obtained. The product is easy to handle and to apply, even without the use of additional organic solvents. 收起 | Request Sample |
| BECKOCURE™ EH 2260w/41WA | Allnex | Beckocure® EH 2260w/41WA是一種疏水性胺類固化劑，推薦用於水性金屬塗料配方，不含揮發性堿性胺和溶劑。結合環氧乳液，可配制具有出色的防腐性及非常好的不流掛性能的快幹底漆和單塗。該產品具有出色的施工性能和非常強大的性能，即使在前處理不良的表面上也一樣。 | Request Sample |
| BECKOPOX™ E 04643 | Allnex | BECKOPOX™ E 04643 is a highly reactive epoxide functional resin designed as a hardener for carboxyl functional polyester resins for use in the production of hybrid powder coatings. Coatings based on carboxylic polyesters such as CRYLCOAT® E 04613 and CRYL...展開 BECKOPOX™ E 04643 is a highly reactive epoxide functional resin designed as a hardener for carboxyl functional polyester resins for use in the production of hybrid powder coatings. Coatings based on carboxylic polyesters such as CRYLCOAT® E 04613 and CRYLCOAT® E 04681 produce outstanding smoothness and chemical resistance at temperature as low as 125°C on MDF. 收起 | Request Sample |
| BECKOPOX™ E 04649 | Allnex | BECKOPOX™ E 04649 is an epoxide functional resin designed as hardener for carboxylated polyester resins for use in the production of hybrid powder coatings. Coatings based on carboxylic polyester such as CRYLCOAT® E 04632 for production of matte dry blend...展開 BECKOPOX™ E 04649 is an epoxide functional resin designed as hardener for carboxylated polyester resins for use in the production of hybrid powder coatings. Coatings based on carboxylic polyester such as CRYLCOAT® E 04632 for production of matte dry blend powder coatings with gloss level of 20 – 35% produce outstanding smoothness at cure temperature as low as 130°C on MDF. 收起 | Request Sample |
| BECKOPOX™ E 04743 | Allnex | BECKOPOX™ E 04743 is a highly reactive epoxide functional resin designed as a hardener for carboxyl functional polyester resins for use in the production of hybrid powder coatings. Coatings based on carboxylic polyesters such as CRYLCOAT® E 04735 and CRYL...展開 BECKOPOX™ E 04743 is a highly reactive epoxide functional resin designed as a hardener for carboxyl functional polyester resins for use in the production of hybrid powder coatings. Coatings based on carboxylic polyesters such as CRYLCOAT® E 04735 and CRYLCOAT® E 04681 produce outstanding smoothness and chemical resistance at temperature as low as 125°C on MDF. 收起 | Request Sample |
| BECKOPOX™ EH 2166w/80WA | Allnex | BECKOPOXTM EH 2166w/80WA is an aliphatic polyamine adduct. It is used together with solid epoxy resin dispersions or emulsified liquid resins. | Request Sample |
| BECKOPOX™ EH 2189w/50WA | Allnex | Beckopox® EH 2189W/50WA is a highly reactive amine hardener for waterbased 2K epoxy coatings on metallic substrates. It is used together with solid epoxy resin dispersions like e.g. Beckopox® EP 384W. Coating systems for metallic substrates can be formula...展開 Beckopox® EH 2189W/50WA is a highly reactive amine hardener for waterbased 2K epoxy coatings on metallic substrates. It is used together with solid epoxy resin dispersions like e.g. Beckopox® EP 384W. Coating systems for metallic substrates can be formulated with excellent humidity and salt spray resistance. The use of 70 - 80 % of the stoichometric curing agent quantity has given best results. 收起 | Request Sample |
| BECKOPOX™ EH 613w/80WA | Allnex | 水性不含乙酸的脂肪族多胺加合物。高反應性固化劑，用於礦物金屬基材用水稀釋涂料，其中快速固化和水釋放性能很重要 | Request Sample |
| BECKOPOX™ EH 623w/80WA | Allnex | 水性溶劑，無醋酸多胺環氧固化劑 | Request Sample |
| BECKOPOX™ EH 637 | Allnex | Beckopox® EH 637 is a cycloaliphatic polyamine adduct with very low viscosity, for use together with liquid epoxy resins for flooring compounds with good chemical resistance and low yellowing tendency. | Request Sample |
| BECKOPOX™ EH 694 | Allnex | BECKOPOX® EH 694是一種酸酐固化劑，可結合固體環氧樹脂，OH-官能團聚酯或作為環氧/聚酯混合體系附加的交聯劑，用於制備粉末塗料。基於BECKOPOX® EH 694的配方具有良好的耐化學品和耐過烘烤性能。 | Request Sample |
| BECKOPOX™ EM 2120w/45WA | Allnex | BECKOPOX® EM 2120W/45WA is an epoxy-amine-adduct dispersion in water, containing very small amounts of organic co-solvent. BECKOPOX® EM 2120W/45WA is suited to formulate water borne 1 pack anticorrosive primers and 1 pack single coats with good anticorros...展開 BECKOPOX® EM 2120W/45WA is an epoxy-amine-adduct dispersion in water, containing very small amounts of organic co-solvent. BECKOPOX® EM 2120W/45WA is suited to formulate water borne 1 pack anticorrosive primers and 1 pack single coats with good anticorrosive properties, especially on smooth steel. 收起 | Request Sample |
| BECKOPOX™ EM 460/60IBX | Allnex | 對於鋼鐵和非鐵金屬具有出色的附著力，高防腐保護性能和最佳的重涂性 | Request Sample |
| BECKOPOX™ EP 116 | Allnex | Beckopox® EP 116 is a non-crystallizing liquid resin for coatings with high chemical-resistance, adhesives, trowelling, casting and laminating compounds. | Request Sample |
| BECKOPOX™ EP 117 | Allnex | Beckopox® EP 117 is a non-crystallizing, reactive diluted liquid resin for chemical-resistant coatings, concrete injections, adhesives, trowelling casting and laminating compounds. | Request Sample |
| BECKOPOX™ EP 128 | Allnex | 低粘度，液體環氧樹脂，反應性稀釋 | Request Sample |
| BECKOPOX™ EP 140 | Allnex | 液體樹脂，具有高耐化學品性能，用於涂料、膠粘劑、抹灰、澆鑄和層合材料 | Request Sample |
| BECKOPOX™ EP 140/80SNB | Allnex | 液體環氧樹脂 | Request Sample |
| BECKOPOX™ EP 147w | Allnex | 100％固體含可水稀釋環氧的反應性表面活性劑 | Request Sample |
| BECKOPOX™ EP 2340w/56WA | Allnex | BECKOPOX® EP 2340W/56WA is serving for trial purposes only. Deviations which might occur during transfer into manufacturing in a commercial scale are possible and do not constitute any material defect. | Request Sample |
| BECKOPOX™ EP 2350w/60WA | Allnex | Beckopox® EP 2350W/60WA is a solid epoxy resin dispersion in water with improved chemical resistance. | Request Sample |
| BECKOPOX™ EP 2384w/57WA | Allnex | Beckopox EP 2384w是一款A劑固體環氧樹脂的水分散液。可以和 Beckopox EH 623w, EH 659w, VEH 2188w , VEH 2177w 等環氧固化劑配套使用，適合金屬或礦物表面。其快干特性讓在一天內進行多次涂層施工成為可能。 | Request Sample |
| BECKOPOX™ EP 2392w/70MP | Allnex | Beckopox® EP 2392w/70MP is a flexibilized, water-emulsifiable, solid epoxy resin that is diluted in methoxypropanol. This solution can be easily emulsified with water in a high-speed mixer to achieve a stable dispersion. This product is used to formulate ...展開 Beckopox® EP 2392w/70MP is a flexibilized, water-emulsifiable, solid epoxy resin that is diluted in methoxypropanol. This solution can be easily emulsified with water in a high-speed mixer to achieve a stable dispersion. This product is used to formulate anticorrosive primers, singular topcoats, due to its water-free form of delivery this product is very well suited for processing of water-sensitive pigments like zinc dust, such zinc-rich primers exhibit outstanding anti-corrosive properties. 收起 | Request Sample |
| BECKOPOX™ EP 301/75X | Allnex | 用於溶劑型涂料，具有良好的耐化學品和耐腐蝕性能，包括鍍鋅涂料和高耐候涂料 | Request Sample |
| BECKOPOX™ EP 384w/53WAMP | Allnex | 固體樹脂－1類－乳液，可結合可用水乳化的液體樹脂用於快干涂料，更適合應用於礦物底材 | Request Sample |
| BECKOPOX™ EP 385w/56WA | Allnex | 固體環氧樹脂，柔韌，可分散於水中。配方對於各種塑膠PC, PA, PUR和UP-層合材料具有良好的附著力 | Request Sample |
| BECKOPOX™ EP 386w/52WA | Allnex | 內部增塑的固體樹脂－1類乳液，具有改善的剪切穩定性，例如用於水性快干抗腐蝕塑膠底漆和涂料 | Request Sample |
| BECKOPOX™ EP 387w/52WA | Allnex | BECKOPOX® EP 387w/52WA是一個柔韌的固體環氧樹脂。它適用於腐蝕保護底漆，對大多數金屬基材具有非常好的附著力。它也適用於金屬基材的單塗層和裝飾體系。為了優化防腐蝕保護性能，推薦固化劑量為75％，按化學計量。 | Request Sample |
| BECKOPOX™ VEH 2106w/80WA | Allnex | 脂肪族多胺加合物，和固體環氧樹脂乳液或乳化液體樹脂一起使用 | Request Sample |
| BECKOPOX™ VEH 2177w/80WA | Allnex | Beckopox® VEH 2177W/80WA is a waterborne non-acetic acid containing aliphatic polyamine adduct used together with solid epoxy resin dispersions or emulsified liquid resins. | Request Sample |
| BECKOPOX™ VEH 2188w/55WA | Allnex | 高度憎水胺固化劑，尤其適用於無揮發性胺的水性金屬涂料配方 | Request Sample |
| BECKOPOX™ VEH 2849w/80WA | Allnex | 水性無醋酸脂肪族多胺加合物，是一種高反應活性固化劑，可用於礦物金屬基材水稀釋涂料，其中快速固化和水釋放性能相當重要 | Request Sample |
| BECKOPOX™ VEM 2448/50EEP | Allnex | Beckopox® VEM 2448/50EEP is a modified, carboxylated epoxy resin, self cross-linking. It's a sole binder for white and clear interior and exterior can-coating systems, stamping enamels, capsule lacquers, foil lacquers and coil-coating primers with outstan...展開 Beckopox® VEM 2448/50EEP is a modified, carboxylated epoxy resin, self cross-linking. It's a sole binder for white and clear interior and exterior can-coating systems, stamping enamels, capsule lacquers, foil lacquers and coil-coating primers with outstanding resistances. 收起 | Request Sample |
| BECKOPOX™ VEP 2381w/55WA | Allnex | 環氧水性乳液，1001型環氧乳液，用於水性面漆、底漆和DTM涂料 | Request Sample |
| BECKOPOX™ VEP 2382w/55WA | Allnex | 環氧水性乳液 | Request Sample |
| BLUESIL ACC PA 39 | Elkem Silicones | BLUESIL ACC PA 39 is an additive that reduces the reaction time of those RTV-2 silicone elastomers that cure by a polyaddition reaction. Both the working time (i.e. the time until the product can be processed, also called pot-life or open-time) and the ta...展開 BLUESIL ACC PA 39 is an additive that reduces the reaction time of those RTV-2 silicone elastomers that cure by a polyaddition reaction. Both the working time (i.e. the time until the product can be processed, also called pot-life or open-time) and the tack-free time (i.e. the time to achieve the final elastomeric properties, also called setting or curing time) will be shortened by the addition of BLUESIL ACC PA 39. 收起 | |
| BLUESIL ADD 11013 | Elkem Silicones | BLUESIL ADD 11013 is a polyether-modified polydimethylsiloxane for use in solventless paints and varnishes, and in water-based paints and inks. | |
| BLUESIL ADD PC THIXO | Elkem Silicones | BLUESIL ADD PC THIXO is an additive designed to reduce the flowability of certain RTV- the BLUESIL range. | |
| BLUESIL ADDITIVE PA THIXO | Elkem Silicones | BLUESIL ADD PA THIXO (Thixotropic Additive) is a rheology modifier for RTV-2 silicones that imparts a thixotropic behavior to the silicone. Its high efficiency allows to reach the non-flow condition with a limited amount added. | |
| BLUESIL CA-35 BLUE | Elkem Silicones | BLUESIL CA-35 BLUE is used primarily with BLUESIL V-330 and BLUESIL V-340. It provides variable hardness of curing for these products. BLUESIL V-330 is a two component, addition cure, room temperature or heat accelerated cure silicone rubber compound. It ...展開 BLUESIL CA-35 BLUE is used primarily with BLUESIL V-330 and BLUESIL V-340. It provides variable hardness of curing for these products. BLUESIL V-330 is a two component, addition cure, room temperature or heat accelerated cure silicone rubber compound. It is designed as a variable hardness rubber with high strength properties, long library life, excellent detail reproduction, excellent release characteristics, and improved resistance to inhibition. The specific hardness is dependent on which curing agent is used. BLUESIL V-330 is an excellent choice for pattern shop, model shop, and Stereolithography service bureau mold making and tooling applications. 收起 | |
| BLUESIL CA-35 FC | Elkem Silicones | BLUESIL CA-35 FC Catalyst is a two component, addition cure, room temperature or heat accelerated cure silicone rubber compound. It is designed as a variable hardness rubber with high strength properties, long library life, excellent detail reproduction, ...展開 BLUESIL CA-35 FC Catalyst is a two component, addition cure, room temperature or heat accelerated cure silicone rubber compound. It is designed as a variable hardness rubber with high strength properties, long library life, excellent detail reproduction, excellent release characteristics, and improved resistance to inhibition. The specific hardness is dependent on which curing agent is used. BLUESIL V-330 + FC Catalyst is an excellent choice for pattern shop, model shop, and Stereolithography service bureau mold making and tooling applications. 收起 | |
| BLUESIL CA-45 FC | Elkem Silicones | BLUESIL CA-45 FC Catalyst is a two component, addition cure, room temperature or heat accelerated cure silicone rubber compound. It is designed as a variable hardness rubber with high strength properties, long library life, excellent detail reproduction, ...展開 BLUESIL CA-45 FC Catalyst is a two component, addition cure, room temperature or heat accelerated cure silicone rubber compound. It is designed as a variable hardness rubber with high strength properties, long library life, excellent detail reproduction, excellent release characteristics, and improved resistance to inhibition. The specific hardness is dependent on which curing agent is used. BLUESIL V-330 + FC Catalyst is an excellent choice for pattern shop, model shop, and Stereolithography service bureau mold making and tooling applications. 收起 | |
| BLUESIL CA-55 FC | Elkem Silicones | BLUESIL CA-55 FC Catalyst is a two component, addition cure, room temperature or heat accelerated cure silicone rubber compound. It is designed as a variable hardness rubber with high strength properties, long library life, excellent detail reproduction, ...展開 BLUESIL CA-55 FC Catalyst is a two component, addition cure, room temperature or heat accelerated cure silicone rubber compound. It is designed as a variable hardness rubber with high strength properties, long library life, excellent detail reproduction, excellent release characteristics, and improved resistance to inhibition. The specific hardness is dependent on which curing agent is used. BLUESIL V-330 + FC Catalyst is an excellent choice for pattern shop, model shop, and Stereolithography service bureau mold making and tooling applications. 收起 | |
| BLUESIL CATA 24H | Elkem Silicones | BLUESIL CATA 24H is a catalyst that cures at room temperature and leads to a flexible and elastic material BLUESIL RTV 3322. | |
| BLUESIL CATA 6H | Elkem Silicones | BLUESIL CATA 6H is a catalyst that cures at room temperature and leads to a flexible and elastic material BLUESIL RTV 3322. | |
| BLUESIL CATA HI PRO BLUE | Elkem Silicones | BLUESIL CATA HI-PRO BLUE is an organotin carboxylate with additives. It is the standard catalyst for the BLUESIL V-1060 series of moldmaking rubber compounds. BLUESIL CATA HI-PRO BLUE provides deep section cure capability, extremely fast hardness developm...展開 BLUESIL CATA HI-PRO BLUE is an organotin carboxylate with additives. It is the standard catalyst for the BLUESIL V-1060 series of moldmaking rubber compounds. BLUESIL CATA HI-PRO BLUE provides deep section cure capability, extremely fast hardness development and long library life to rubber. 收起 | |
| BLUESIL CATA HI PRO GREEN | Elkem Silicones | BLUESIL CATA HI-PRO GREEN is an organotin carboxylate with additives. It is the standard catalyst for most of the BLUESIL V-1060 and V-1080 series of moldmaking rubber compounds. BLUESIL CATA HI-PRO GREEN provides deep section cure capability, fast hardne...展開 BLUESIL CATA HI-PRO GREEN is an organotin carboxylate with additives. It is the standard catalyst for most of the BLUESIL V-1060 and V-1080 series of moldmaking rubber compounds. BLUESIL CATA HI-PRO GREEN provides deep section cure capability, fast hardness development and long library life to rubber. 收起 | |
| BLUESIL CATA PC THIXO | Elkem Silicones | BLUESIL CATA PC THIXO is a tin salt based activator for Silicon RTV. After addition of 5% of catalyst PC Thixo, the siliconic system –BASE + CATALYST PC becomes more and more elastic, losing its plastic behaviour, and thixotropic. | |
| BLUESIL EMUL 1601 | Elkem Silicones | BLUESIL EMUL 1601 is a general purpose, non-ionic oil in water silicone emulsion of a medium viscosity non-reactive dimethyl polysiloxane. BLUESIL EMUL 1601 may be used alone or as an additive at low levels in other emulsion systems to achieve specific p...展開 BLUESIL EMUL 1601 is a general purpose, non-ionic oil in water silicone emulsion of a medium viscosity non-reactive dimethyl polysiloxane. BLUESIL EMUL 1601 may be used alone or as an additive at low levels in other emulsion systems to achieve specific performance or processing characteristics. 收起 | |
| BLUESIL EMUL 1610 | Elkem Silicones | BLUESIL EMUL 1610 is a general purpose, non-ionic oil in water silicone emulsion of a high viscosity non-reactive dimethyl polysiloxane. BLUESIL EMUL 1610 may be used alone or as an additive at low levels in other emulsion systems to achieve specific per...展開 BLUESIL EMUL 1610 is a general purpose, non-ionic oil in water silicone emulsion of a high viscosity non-reactive dimethyl polysiloxane. BLUESIL EMUL 1610 may be used alone or as an additive at low levels in other emulsion systems to achieve specific performance or processing characteristics. 收起 | |
| BLUESIL EMUL 872RH | Elkem Silicones | BLUESIL EMUL 872RH is a general purpose, non-ionic, aqueous silicone emulsion. | |
| BLUESIL FLD 1658 | Elkem Silicones | BLUESIL FLD 1658 is a methylalkylpolysiloxane which has outstanding lubricating properties and presents a good compatibility with many products other than silicones. | |
| BLUESIL GP-25 | Elkem Silicones | BLUESIL GP 25 is a general purpose, 25DSA, two component, tin catalyzed, room temperature curing silicone elastomer. It is designed as a medium viscosity, medium strength elastomer with good cured rubber properties, long library life and accurate detail r...展開 BLUESIL GP 25 is a general purpose, 25DSA, two component, tin catalyzed, room temperature curing silicone elastomer. It is designed as a medium viscosity, medium strength elastomer with good cured rubber properties, long library life and accurate detail reproduction. 收起 | |
| BLUESIL HI PRO CLEAR | Elkem Silicones | BLUESIL CATA HI-PRO CLEAR is an organotin carboxylate with additives. It is a clear catalyst for most of theBLUESIL V-1060 andV-1080 series of moldmaking rubber compounds.BLUESIL CATA HI-PRO CLEAR provides deep section cure capability, fast hardness devel...展開 BLUESIL CATA HI-PRO CLEAR is an organotin carboxylate with additives. It is a clear catalyst for most of theBLUESIL V-1060 andV-1080 series of moldmaking rubber compounds.BLUESIL CATA HI-PRO CLEAR provides deep section cure capability, fast hardness development and long library life to rubber. 收起 | |
| BLUESIL PC RTRD | Elkem Silicones | BLUESIL PC RTRD is an additive designed to increase the time required to obtain the final properties of condensation curing RTV-2. | |
| BLUESIL PI 2074 | Elkem Silicones | BLUESIL PI 2074 is a cationic photoinitiator for use with epoxy resins, vinyl ethers or any other type of oligomer which polymerises cationically. It is also suited to the formulation of hybrid radical / cationic systems. | |
| BLUESIL PT ACC | Elkem Silicones | BLUESIL PT ACC is an accelerator for platinum cure, polyaddition silicone moldmaking compounds. It can be used with many of Bluestar Silicones addition cure products to customize the de-mold time to as short as 2 hours, allowing multiple molds to be made ...展開 BLUESIL PT ACC is an accelerator for platinum cure, polyaddition silicone moldmaking compounds. It can be used with many of Bluestar Silicones addition cure products to customize the de-mold time to as short as 2 hours, allowing multiple molds to be made each day per master. This can be done without adversely affecting the physical properties of the elastomer. 收起 | |
| BLUESIL RT FOAM 3240 A | Elkem Silicones | BLUESIL RT FOAM 3240 A&B is a two-component silicone foam which cures at room temperature by an addition cure reaction. When the A and B liquid components are thoroughly mixed in 1:1 ratio, the product will expand and cure to a foamed elastomer at room te...展開 BLUESIL RT FOAM 3240 A&B is a two-component silicone foam which cures at room temperature by an addition cure reaction. When the A and B liquid components are thoroughly mixed in 1:1 ratio, the product will expand and cure to a foamed elastomer at room temperature. 收起 | |
| BLUESIL RT FOAM 3241 A | Elkem Silicones | BLUESIL RT FOAM 3241 A&B is a two-component silicone foam which cures at room temperature by an addition cure reaction. When the A and B liquid components are thoroughly mixed in a 1:1 ratio, the product expands and cures to a foamed elastomer at room tem...展開 BLUESIL RT FOAM 3241 A&B is a two-component silicone foam which cures at room temperature by an addition cure reaction. When the A and B liquid components are thoroughly mixed in a 1:1 ratio, the product expands and cures to a foamed elastomer at room temperature. 收起 | |
| BLUESIL RTRD PA 40 | Elkem Silicones | BLUESIL RTRD PA 40 is an additive that increases the reaction time of those RTV-2 silicone elastomers that cure by a polyaddition reaction. Both the working time (i.e. the time until the product can be processed, also called pot-life or open-time) and the...展開 BLUESIL RTRD PA 40 is an additive that increases the reaction time of those RTV-2 silicone elastomers that cure by a polyaddition reaction. Both the working time (i.e. the time until the product can be processed, also called pot-life or open-time) and the tack-free time (i.e. the time to achieve the final elastomeric properties, also called setting or curing time) will be prolonged by the addition of BLUESIL RTRD PA 40. 收起 | |
| BLUESIL RTV 1556 A | Elkem Silicones | BLUESIL RTV 1556 is a two component, high strength, addition cure, room temperature or heat vulcanized silicone rubber compound. Designed specifically for moldmaking and resin infusion vacuum bag applications, it offers low viscosity, high tear cut resist...展開 BLUESIL RTV 1556 is a two component, high strength, addition cure, room temperature or heat vulcanized silicone rubber compound. Designed specifically for moldmaking and resin infusion vacuum bag applications, it offers low viscosity, high tear cut resistance, and easy release for long lasting molds. BLUESIL RTV 1556 has high temperature and chemical resistance with excellent flexibility, low shrinkage, and excellent detail reproduction which makes it well suited for production and prototyping use with all types of casting resins. 收起 | |
| BLUESIL RTV 1556 FC B | Elkem Silicones | BLUESIL RTV 1556 is a two component, high strength, addition cure, room temperature or heat vulcanized silicone rubber compound. Designed specifically for moldmaking and resin infusion vacuum bag applications, it offers low viscosity, high tear cut resist...展開 BLUESIL RTV 1556 is a two component, high strength, addition cure, room temperature or heat vulcanized silicone rubber compound. Designed specifically for moldmaking and resin infusion vacuum bag applications, it offers low viscosity, high tear cut resistance, and easy release for long lasting molds. BLUESIL RTV 1556 has high temperature and chemical resistance with excellent flexibility, low shrinkage, and excellent detail reproduction which makes it well suited for production and prototyping use with all types of casting resins. 收起 | |
| BLUESIL RTV 1597 A | Elkem Silicones | BLUESIL RTV 1597 is a two component, medium hardness, high strength, addition cure, room temperature or heat curing silicone elastomer. Designed specifically for moldmaking applications, it offers low viscosity, high tear and cut resistance, and easy rele...展開 BLUESIL RTV 1597 is a two component, medium hardness, high strength, addition cure, room temperature or heat curing silicone elastomer. Designed specifically for moldmaking applications, it offers low viscosity, high tear and cut resistance, and easy release for long lasting molds. BLUESIL RTV 1597 has high temperature and chemical resistance with excellent flexibility, low shrinkage, and well-defined detail reproduction, making it ideal for prototyping applications. 收起 | |
| BLUESIL RTV 3040 A | Elkem Silicones | BLUESIL RTV 3040 A is a two component silicone elastomer which is available in 5 versions with different features. It crosslinks at room temperature by polyaddition reaction. The polymerisation can be accelerated by heat (max. 150°C). The silicone compone...展開 BLUESIL RTV 3040 A is a two component silicone elastomer which is available in 5 versions with different features. It crosslinks at room temperature by polyaddition reaction. The polymerisation can be accelerated by heat (max. 150°C). The silicone components are delivered as two viscous liquids, which once mixed and cured, transform into a transparent, elastic and resistant material. Polymerisation occurs without production of heat. 收起 | |
| BLUESIL RTV 3040 B | Elkem Silicones | BLUESIL RTV 3040 B is a two component silicone elastomer which is available in 5 versions with different features. It crosslinks at room temperature by polyaddition reaction. The polymerisation can be accelerated by heat (max. 150°C). The silicone compone...展開 BLUESIL RTV 3040 B is a two component silicone elastomer which is available in 5 versions with different features. It crosslinks at room temperature by polyaddition reaction. The polymerisation can be accelerated by heat (max. 150°C). The silicone components are delivered as two viscous liquids, which once mixed and cured, transform into a transparent, elastic and resistant material. Polymerisation occurs without production of heat. 收起 | |
| BLUESIL RTV 3040 HARD A 1/1 | Elkem Silicones | BLUESIL RTV 3040 HARD A 1/1 is a two component silicone elastomer which is available in 5 versions with different features. It crosslinks at room temperature by polyaddition reaction. The polymerisation can be accelerated by heat (max. 150°C). The silicon...展開 BLUESIL RTV 3040 HARD A 1/1 is a two component silicone elastomer which is available in 5 versions with different features. It crosslinks at room temperature by polyaddition reaction. The polymerisation can be accelerated by heat (max. 150°C). The silicone components are delivered as two viscous liquids, which once mixed and cured, transform into a transparent, elastic and resistant material. Polymerisation occurs without production of heat. 收起 | |
| BLUESIL RTV 3040 HARD B | Elkem Silicones | BLUESIL RTV 3040 HARD B is a two component silicone elastomer which is available in 5 versions with different features. It crosslinks at room temperature by polyaddition reaction. The polymerisation can be accelerated by heat (max. 150°C). The silicone co...展開 BLUESIL RTV 3040 HARD B is a two component silicone elastomer which is available in 5 versions with different features. It crosslinks at room temperature by polyaddition reaction. The polymerisation can be accelerated by heat (max. 150°C). The silicone components are delivered as two viscous liquids, which once mixed and cured, transform into a transparent, elastic and resistant material. Polymerisation occurs without production of heat. 收起 | |
| BLUESIL RTV 3040 LV B | Elkem Silicones | BLUESIL RTV 3040 LV B is a two component silicone elastomer which is available in 5 versions with different features. It crosslinks at room temperature by polyaddition reaction. The polymerisation can be accelerated by heat (max. 150°C). The silicone comp...展開 BLUESIL RTV 3040 LV B is a two component silicone elastomer which is available in 5 versions with different features. It crosslinks at room temperature by polyaddition reaction. The polymerisation can be accelerated by heat (max. 150°C). The silicone components are delivered as two viscous liquids, which once mixed and cured, transform into a transparent, elastic and resistant material. Polymerisation occurs without production of heat. 收起 |
