| 99.99% Conductive Shining Flake Silver Powder | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | 99.99% Conductive Shining Flake Silver Powders are different silver powder products are chosen according to different use conditions. Low apparent density flake silver powders is the main raw material in production of conductive coating, membrane switch, ...展開 99.99% Conductive Shining Flake Silver Powders are different silver powder products are chosen according to different use conditions. Low apparent density flake silver powders is the main raw material in production of conductive coating, membrane switch, conductive inks, conductive rubber, conductive plastic, conductive ceramics.Low apparent density flake silver powder is mainly used in the low temperature electronic paste, conductive inks, conductive coatings, electromagnetic shielding coatings. the coating configurated by flake silver powder, whose liquidity and resistance to settlement is good, the coating area is large. 收起 | |
| 99.99% Conductive Silver Powder (Spherical) | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | 99.99% Conductive Silver Powder (Spherical) are widely used in electronic pastes, electronic products, electrical conductivity, electromagnetic shielding, anti-bacterial, and anti-virus applications. | |
| A-2468 Aluminium Paste | Silberline Manufacturing Co., Inc. | A-2468 is a coarse non-leafing aluminum pigment with cornflake geometry. | |
| A-6205 Aluminium Paste | Silberline Manufacturing Co., Inc. | A-6205 is a standard grade; class B, medium sized, leafing aluminum pigment carried in C-66 exempt mineral spirits. | |
| A-6571FG Aluminum Paste | Silberline Manufacturing Co., Inc. | A-6571FG is a standard polished grade; class A, fine particle size, leafing aluminum pigment carried in C-66 exempt mineral spirits. A-6571FG is suitable for use in aerosol paints and maintenance coatings. | |
| Acetylated Distarch Ddipate | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Acetylated Distarch Ddipate has a certain ability of anti-acid and anti-alkali, anti-cutting ability, is of good viscosity. It is used it as thickening agent, premium quality stabiliser in wallpaper adhesive. | |
| Acetylated Distarch Phosphate | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Acetylated Distarch Phosphate is a fine white to off white powder with characteristic starch taste and odor. Compared with the original starch, the solubility, swelling power and transparency were significantly increased, the aging tendency was significan...展開 Acetylated Distarch Phosphate is a fine white to off white powder with characteristic starch taste and odor. Compared with the original starch, the solubility, swelling power and transparency were significantly increased, the aging tendency was significantly decreased, and the freezing stability was improved. This product is heat-resistant and acid-resistant. It is used it as thickening agent in wallpaper adhesive. 收起 | |
| Alkylsulfonic Acid Ester of Phenol Plasticizer | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Alkylsulfonic acid ester of phenol is a common environmental friendly plasticizer.It possess excellent plasticizing and saponifying effect are suitable for various types of polymers such as PU and PVC. | |
| AQUA PASTE® 055-C33 | Silberline Manufacturing Co., Inc. | AQUA PASTE® 055-C33 is a passivated aluminum paste comprised of a coarse particle size, non-leafing lenticular flake that provides excellent brightness. | |
| AQUASIL® BP 3500 Inhibited Aluminum Pigment | Silberline Manufacturing Co., Inc. | AQUASIL® BP 3500 is a medium particle size, bright, non-leafing inhibited aluminum pigment for waterborne general industrial coatings. This is an economical grade with cornflake geometry and wide particle size distribution range. This grade can be used wi...展開 AQUASIL® BP 3500 is a medium particle size, bright, non-leafing inhibited aluminum pigment for waterborne general industrial coatings. This is an economical grade with cornflake geometry and wide particle size distribution range. This grade can be used with chromatic pigments to produce colored metallic effects. 收起 | |
| Aquavex® AD 010 Aluminium Pigment | Silberline Manufacturing Co., Inc. | Aquavex® AD 010 contains super fine particle size, high adhesion, aluminium flake pigment in a low dusting, easily handled form. It combines in one product the easy dispersibility of WD grades and the gassing resistance of Aqua Paste®. It is essentially f...展開 Aquavex® AD 010 contains super fine particle size, high adhesion, aluminium flake pigment in a low dusting, easily handled form. It combines in one product the easy dispersibility of WD grades and the gassing resistance of Aqua Paste®. It is essentially free of hydrocarbon solvents, but contains a passivating agent to minimise the release of hydrogen gas that can occur when aluminium flake is in contact with water. Surfactants contribute to both the low dusting property and easy dispersibility in water. Suggested applications are water-based inks and some water-based industrial paints. 收起 | |
| Aquavex® AD 015 Aluminium Pigment | Silberline Manufacturing Co., Inc. | Aquavex® AD 015 contains medium-fine particle size, high adhesion, aluminium flake pigment in a low dusting, easily handled form. It combines in one product the easy dispersibility of WD grades and the gassing resistance of Aqua Paste®. It is essentially ...展開 Aquavex® AD 015 contains medium-fine particle size, high adhesion, aluminium flake pigment in a low dusting, easily handled form. It combines in one product the easy dispersibility of WD grades and the gassing resistance of Aqua Paste®. It is essentially free of hydrocarbon solvents, but contains a passivating agent to minimise the release of hydrogen gas that can occur when aluminium flake is in contact with water. Surfactants contribute to both the low dusting property and easy dispersibility in water. Suggested applications are water-based inks and some water-based industrial paints. 收起 | |
| AQUAVEX® L Premier 021 Aluminium Pigment | Silberline Manufacturing Co., Inc. | AQUAVEX® L Premier 021 contains a medium particle size, extremely reflective aluminum flake pigment in a low dusting, easily handled form. It combines in one product the easy dispersibility of WD grades and the gassing resistance of AQUAPASTE®. It is esse...展開 AQUAVEX® L Premier 021 contains a medium particle size, extremely reflective aluminum flake pigment in a low dusting, easily handled form. It combines in one product the easy dispersibility of WD grades and the gassing resistance of AQUAPASTE®. It is essentially free of hydrocarbon solvents, but contains a passivating agent to minimize the release of hydrogen gas that can occur when aluminum flake is in contact with water. Surfactants contribute to both the low dusting property and easy dispersibility in water. Suggested applications are water-based inks and some water-based industrial paints. 收起 | |
| AQUAVEX® NL 010 Aluminium Pigment | Silberline Manufacturing Co., Inc. | AQUAVEX® NL 010 contains super fine particle size, but very bright aluminum flake pigment in a low dusting, easily handled form. It combines in one product, the easy dispersibility of WD grades and the gassing resistance of AQUA PASTE®. It is essentially ...展開 AQUAVEX® NL 010 contains super fine particle size, but very bright aluminum flake pigment in a low dusting, easily handled form. It combines in one product, the easy dispersibility of WD grades and the gassing resistance of AQUA PASTE®. It is essentially free of hydrocarbon solvents, but contains a passivating agent to minimize the release of hydrogen gas that can occur when aluminum flake is in contact with water. Surfactants contribute to both the low dusting property and easy dispersibility in water. Suggested applications are water-based inks and some water-based industrial paints. 收起 | |
| AQUAVEX® NL 013 Aluminium Pigment | Silberline Manufacturing Co., Inc. | AQUAVEX® NL 013 contains fine particle size, but very bright aluminum flake pigment in a low dusting, easily handled form. It combines in one product the easy dispersibility of WD grades and the gassing resistance of AQUA PASTE®. It is essentially free of...展開 AQUAVEX® NL 013 contains fine particle size, but very bright aluminum flake pigment in a low dusting, easily handled form. It combines in one product the easy dispersibility of WD grades and the gassing resistance of AQUA PASTE®. It is essentially free of hydrocarbon solvents, but contains a passivating agent to minimize the release of hydrogen gas that can occur when aluminum flake is in contact with water. Surfactants contribute to both the low dusting property and easy dispersibility in water. Suggested applications are water-based inks and some water-based industrial paints. 收起 | |
| AQUAVEX® NL 028 Aluminium Pigment | Silberline Manufacturing Co., Inc. | AQUAVEX® NL 028 contains coarse particle size, bright and sparkling aluminum flake pigment in a low dusting, easily handled form. It combines in one product, the easy dispersibility of WD grades and the gassing resistance of AQUA PASTE®. It is essentially...展開 AQUAVEX® NL 028 contains coarse particle size, bright and sparkling aluminum flake pigment in a low dusting, easily handled form. It combines in one product, the easy dispersibility of WD grades and the gassing resistance of AQUA PASTE®. It is essentially free of hydrocarbon solvents, but contains a passivating agent to minimize the release of hydrogen gas that can occur when aluminum flake is in contact with water. Surfactants contribute to both the low dusting property and easy dispersibility in water. Suggested applications are water-based inks and some water-based industrial paints. 收起 | |
| Benzidine Yellow G (1138-121) | Ggink International Limited | Benzidine Yellow G (1138-121) is a reddish/yellow diarylide pigment with a CI Number of 21090 (PY 12). This product provides gloss, dispersion and flow properties. Benzidine Yellow G (1138-121) is used in publication gravure applications. | |
| Benzidine Yellow G (1138-O) | Ggink International Limited | Benzidine Yellow G (1138-O) is a semi-opaque, yellow, diarylide pigment with a CI number of 21090 (PY 12). This product provides long flow properties. Benzidine Yellow G (1138-O) is used in web offset news ink, web offset heatset ink and sheetfed ink appl...展開 Benzidine Yellow G (1138-O) is a semi-opaque, yellow, diarylide pigment with a CI number of 21090 (PY 12). This product provides long flow properties. Benzidine Yellow G (1138-O) is used in web offset news ink, web offset heatset ink and sheetfed ink applications. 收起 | |
| Benzidine Yellow G (1138-OH) | Ggink International Limited | Benzidine Yellow G (1138-OH) is a transparent yellow pigment with a CI Number of 21090 (PY 12). This product provides flow and tinting properties for processing color. Benzidine Yellow G (1138-OH) can be used in web offset news and heatset ink, and sheetf...展開 Benzidine Yellow G (1138-OH) is a transparent yellow pigment with a CI Number of 21090 (PY 12). This product provides flow and tinting properties for processing color. Benzidine Yellow G (1138-OH) can be used in web offset news and heatset ink, and sheetfed ink. 收起 | |
| Benzidine Yellow G (1138-T/99) | Ggink International Limited | Benzidine Yellow G (1138-T/99) is a transparent, greenish shade pigment with a CI Number of 21090 (PY 12). This product has high tinting strength for process color. Benzidine Yellow G (1138-T/99) is used in web offset news ink, web offset heatset ink and ...展開 Benzidine Yellow G (1138-T/99) is a transparent, greenish shade pigment with a CI Number of 21090 (PY 12). This product has high tinting strength for process color. Benzidine Yellow G (1138-T/99) is used in web offset news ink, web offset heatset ink and sheetfed ink applications. 收起 | |
| Benzidine Yellow G (1138-TR) | Ggink International Limited | Benzidine Yellow G (1138-TR) is a transparent, greenish/yellow shade pigment with a CI Number of 21090 (PY 12). This product provides gloss and flow properties. Benzidine Yellow G (1138-TR) is used in NC/alcohol ink, co-solvent polyamide and laroflex/Clpp...展開 Benzidine Yellow G (1138-TR) is a transparent, greenish/yellow shade pigment with a CI Number of 21090 (PY 12). This product provides gloss and flow properties. Benzidine Yellow G (1138-TR) is used in NC/alcohol ink, co-solvent polyamide and laroflex/Clpp ink applications. 收起 | |
| Benzidine Yellow G (1138-W (321)) | Ggink International Limited | Benzidine Yellow G (1138-W (321)) is a semi-opaque greenish yellow pigment with a CI Number of 21090 (PY 12). This product provides water stability and high tinting properties. Benzidine Yellow G (1138-W (321)) is used in water based ink, polyvinybutyral ...展開 Benzidine Yellow G (1138-W (321)) is a semi-opaque greenish yellow pigment with a CI Number of 21090 (PY 12). This product provides water stability and high tinting properties. Benzidine Yellow G (1138-W (321)) is used in water based ink, polyvinybutyral ink, co-solvent polyamide and laroflex/Clpp ink applications. 收起 | |
| BLUESIL ACC PA 39 | Elkem Silicones | BLUESIL ACC PA 39 is an additive that reduces the reaction time of those RTV-2 silicone elastomers that cure by a polyaddition reaction. Both the working time (i.e. the time until the product can be processed, also called pot-life or open-time) and the ta...展開 BLUESIL ACC PA 39 is an additive that reduces the reaction time of those RTV-2 silicone elastomers that cure by a polyaddition reaction. Both the working time (i.e. the time until the product can be processed, also called pot-life or open-time) and the tack-free time (i.e. the time to achieve the final elastomeric properties, also called setting or curing time) will be shortened by the addition of BLUESIL ACC PA 39. 收起 | |
| BLUESIL ADD 11013 | Elkem Silicones | BLUESIL ADD 11013 is a polyether-modified polydimethylsiloxane for use in solventless paints and varnishes, and in water-based paints and inks. | |
| BLUESIL ADD PC THIXO | Elkem Silicones | BLUESIL ADD PC THIXO is an additive designed to reduce the flowability of certain RTV- the BLUESIL range. | |
| BLUESIL ADDITIVE PA THIXO | Elkem Silicones | BLUESIL ADD PA THIXO (Thixotropic Additive) is a rheology modifier for RTV-2 silicones that imparts a thixotropic behavior to the silicone. Its high efficiency allows to reach the non-flow condition with a limited amount added. | |
| BLUESIL CA-35 BLUE | Elkem Silicones | BLUESIL CA-35 BLUE is used primarily with BLUESIL V-330 and BLUESIL V-340. It provides variable hardness of curing for these products. BLUESIL V-330 is a two component, addition cure, room temperature or heat accelerated cure silicone rubber compound. It ...展開 BLUESIL CA-35 BLUE is used primarily with BLUESIL V-330 and BLUESIL V-340. It provides variable hardness of curing for these products. BLUESIL V-330 is a two component, addition cure, room temperature or heat accelerated cure silicone rubber compound. It is designed as a variable hardness rubber with high strength properties, long library life, excellent detail reproduction, excellent release characteristics, and improved resistance to inhibition. The specific hardness is dependent on which curing agent is used. BLUESIL V-330 is an excellent choice for pattern shop, model shop, and Stereolithography service bureau mold making and tooling applications. 收起 | |
| BLUESIL CA-35 FC | Elkem Silicones | BLUESIL CA-35 FC Catalyst is a two component, addition cure, room temperature or heat accelerated cure silicone rubber compound. It is designed as a variable hardness rubber with high strength properties, long library life, excellent detail reproduction, ...展開 BLUESIL CA-35 FC Catalyst is a two component, addition cure, room temperature or heat accelerated cure silicone rubber compound. It is designed as a variable hardness rubber with high strength properties, long library life, excellent detail reproduction, excellent release characteristics, and improved resistance to inhibition. The specific hardness is dependent on which curing agent is used. BLUESIL V-330 + FC Catalyst is an excellent choice for pattern shop, model shop, and Stereolithography service bureau mold making and tooling applications. 收起 | |
| BLUESIL CA-45 FC | Elkem Silicones | BLUESIL CA-45 FC Catalyst is a two component, addition cure, room temperature or heat accelerated cure silicone rubber compound. It is designed as a variable hardness rubber with high strength properties, long library life, excellent detail reproduction, ...展開 BLUESIL CA-45 FC Catalyst is a two component, addition cure, room temperature or heat accelerated cure silicone rubber compound. It is designed as a variable hardness rubber with high strength properties, long library life, excellent detail reproduction, excellent release characteristics, and improved resistance to inhibition. The specific hardness is dependent on which curing agent is used. BLUESIL V-330 + FC Catalyst is an excellent choice for pattern shop, model shop, and Stereolithography service bureau mold making and tooling applications. 收起 | |
| BLUESIL CA-55 FC | Elkem Silicones | BLUESIL CA-55 FC Catalyst is a two component, addition cure, room temperature or heat accelerated cure silicone rubber compound. It is designed as a variable hardness rubber with high strength properties, long library life, excellent detail reproduction, ...展開 BLUESIL CA-55 FC Catalyst is a two component, addition cure, room temperature or heat accelerated cure silicone rubber compound. It is designed as a variable hardness rubber with high strength properties, long library life, excellent detail reproduction, excellent release characteristics, and improved resistance to inhibition. The specific hardness is dependent on which curing agent is used. BLUESIL V-330 + FC Catalyst is an excellent choice for pattern shop, model shop, and Stereolithography service bureau mold making and tooling applications. 收起 | |
| BLUESIL CATA 24H | Elkem Silicones | BLUESIL CATA 24H is a catalyst that cures at room temperature and leads to a flexible and elastic material BLUESIL RTV 3322. | |
| BLUESIL CATA 6H | Elkem Silicones | BLUESIL CATA 6H is a catalyst that cures at room temperature and leads to a flexible and elastic material BLUESIL RTV 3322. | |
| BLUESIL CATA HI PRO BLUE | Elkem Silicones | BLUESIL CATA HI-PRO BLUE is an organotin carboxylate with additives. It is the standard catalyst for the BLUESIL V-1060 series of moldmaking rubber compounds. BLUESIL CATA HI-PRO BLUE provides deep section cure capability, extremely fast hardness developm...展開 BLUESIL CATA HI-PRO BLUE is an organotin carboxylate with additives. It is the standard catalyst for the BLUESIL V-1060 series of moldmaking rubber compounds. BLUESIL CATA HI-PRO BLUE provides deep section cure capability, extremely fast hardness development and long library life to rubber. 收起 | |
| BLUESIL CATA HI PRO GREEN | Elkem Silicones | BLUESIL CATA HI-PRO GREEN is an organotin carboxylate with additives. It is the standard catalyst for most of the BLUESIL V-1060 and V-1080 series of moldmaking rubber compounds. BLUESIL CATA HI-PRO GREEN provides deep section cure capability, fast hardne...展開 BLUESIL CATA HI-PRO GREEN is an organotin carboxylate with additives. It is the standard catalyst for most of the BLUESIL V-1060 and V-1080 series of moldmaking rubber compounds. BLUESIL CATA HI-PRO GREEN provides deep section cure capability, fast hardness development and long library life to rubber. 收起 | |
| BLUESIL CATA PC THIXO | Elkem Silicones | BLUESIL CATA PC THIXO is a tin salt based activator for Silicon RTV. After addition of 5% of catalyst PC Thixo, the siliconic system –BASE + CATALYST PC becomes more and more elastic, losing its plastic behaviour, and thixotropic. | |
| BLUESIL EMUL 1601 | Elkem Silicones | BLUESIL EMUL 1601 is a general purpose, non-ionic oil in water silicone emulsion of a medium viscosity non-reactive dimethyl polysiloxane. BLUESIL EMUL 1601 may be used alone or as an additive at low levels in other emulsion systems to achieve specific p...展開 BLUESIL EMUL 1601 is a general purpose, non-ionic oil in water silicone emulsion of a medium viscosity non-reactive dimethyl polysiloxane. BLUESIL EMUL 1601 may be used alone or as an additive at low levels in other emulsion systems to achieve specific performance or processing characteristics. 收起 | |
| BLUESIL EMUL 1610 | Elkem Silicones | BLUESIL EMUL 1610 is a general purpose, non-ionic oil in water silicone emulsion of a high viscosity non-reactive dimethyl polysiloxane. BLUESIL EMUL 1610 may be used alone or as an additive at low levels in other emulsion systems to achieve specific per...展開 BLUESIL EMUL 1610 is a general purpose, non-ionic oil in water silicone emulsion of a high viscosity non-reactive dimethyl polysiloxane. BLUESIL EMUL 1610 may be used alone or as an additive at low levels in other emulsion systems to achieve specific performance or processing characteristics. 收起 | |
| BLUESIL EMUL 872RH | Elkem Silicones | BLUESIL EMUL 872RH is a general purpose, non-ionic, aqueous silicone emulsion. | |
| BLUESIL FLD 1658 | Elkem Silicones | BLUESIL FLD 1658 is a methylalkylpolysiloxane which has outstanding lubricating properties and presents a good compatibility with many products other than silicones. | |
| BLUESIL GP-25 | Elkem Silicones | BLUESIL GP 25 is a general purpose, 25DSA, two component, tin catalyzed, room temperature curing silicone elastomer. It is designed as a medium viscosity, medium strength elastomer with good cured rubber properties, long library life and accurate detail r...展開 BLUESIL GP 25 is a general purpose, 25DSA, two component, tin catalyzed, room temperature curing silicone elastomer. It is designed as a medium viscosity, medium strength elastomer with good cured rubber properties, long library life and accurate detail reproduction. 收起 | |
| BLUESIL HI PRO CLEAR | Elkem Silicones | BLUESIL CATA HI-PRO CLEAR is an organotin carboxylate with additives. It is a clear catalyst for most of theBLUESIL V-1060 andV-1080 series of moldmaking rubber compounds.BLUESIL CATA HI-PRO CLEAR provides deep section cure capability, fast hardness devel...展開 BLUESIL CATA HI-PRO CLEAR is an organotin carboxylate with additives. It is a clear catalyst for most of theBLUESIL V-1060 andV-1080 series of moldmaking rubber compounds.BLUESIL CATA HI-PRO CLEAR provides deep section cure capability, fast hardness development and long library life to rubber. 收起 | |
| BLUESIL PC RTRD | Elkem Silicones | BLUESIL PC RTRD is an additive designed to increase the time required to obtain the final properties of condensation curing RTV-2. | |
| BLUESIL PI 2074 | Elkem Silicones | BLUESIL PI 2074 is a cationic photoinitiator for use with epoxy resins, vinyl ethers or any other type of oligomer which polymerises cationically. It is also suited to the formulation of hybrid radical / cationic systems. | |
| BLUESIL PT ACC | Elkem Silicones | BLUESIL PT ACC is an accelerator for platinum cure, polyaddition silicone moldmaking compounds. It can be used with many of Bluestar Silicones addition cure products to customize the de-mold time to as short as 2 hours, allowing multiple molds to be made ...展開 BLUESIL PT ACC is an accelerator for platinum cure, polyaddition silicone moldmaking compounds. It can be used with many of Bluestar Silicones addition cure products to customize the de-mold time to as short as 2 hours, allowing multiple molds to be made each day per master. This can be done without adversely affecting the physical properties of the elastomer. 收起 | |
| BLUESIL RT FOAM 3240 A | Elkem Silicones | BLUESIL RT FOAM 3240 A&B is a two-component silicone foam which cures at room temperature by an addition cure reaction. When the A and B liquid components are thoroughly mixed in 1:1 ratio, the product will expand and cure to a foamed elastomer at room te...展開 BLUESIL RT FOAM 3240 A&B is a two-component silicone foam which cures at room temperature by an addition cure reaction. When the A and B liquid components are thoroughly mixed in 1:1 ratio, the product will expand and cure to a foamed elastomer at room temperature. 收起 | |
| BLUESIL RT FOAM 3241 A | Elkem Silicones | BLUESIL RT FOAM 3241 A&B is a two-component silicone foam which cures at room temperature by an addition cure reaction. When the A and B liquid components are thoroughly mixed in a 1:1 ratio, the product expands and cures to a foamed elastomer at room tem...展開 BLUESIL RT FOAM 3241 A&B is a two-component silicone foam which cures at room temperature by an addition cure reaction. When the A and B liquid components are thoroughly mixed in a 1:1 ratio, the product expands and cures to a foamed elastomer at room temperature. 收起 | |
| BLUESIL RTRD PA 40 | Elkem Silicones | BLUESIL RTRD PA 40 is an additive that increases the reaction time of those RTV-2 silicone elastomers that cure by a polyaddition reaction. Both the working time (i.e. the time until the product can be processed, also called pot-life or open-time) and the...展開 BLUESIL RTRD PA 40 is an additive that increases the reaction time of those RTV-2 silicone elastomers that cure by a polyaddition reaction. Both the working time (i.e. the time until the product can be processed, also called pot-life or open-time) and the tack-free time (i.e. the time to achieve the final elastomeric properties, also called setting or curing time) will be prolonged by the addition of BLUESIL RTRD PA 40. 收起 | |
| BLUESIL RTV 1556 A | Elkem Silicones | BLUESIL RTV 1556 is a two component, high strength, addition cure, room temperature or heat vulcanized silicone rubber compound. Designed specifically for moldmaking and resin infusion vacuum bag applications, it offers low viscosity, high tear cut resist...展開 BLUESIL RTV 1556 is a two component, high strength, addition cure, room temperature or heat vulcanized silicone rubber compound. Designed specifically for moldmaking and resin infusion vacuum bag applications, it offers low viscosity, high tear cut resistance, and easy release for long lasting molds. BLUESIL RTV 1556 has high temperature and chemical resistance with excellent flexibility, low shrinkage, and excellent detail reproduction which makes it well suited for production and prototyping use with all types of casting resins. 收起 | |
| BLUESIL RTV 1556 FC B | Elkem Silicones | BLUESIL RTV 1556 is a two component, high strength, addition cure, room temperature or heat vulcanized silicone rubber compound. Designed specifically for moldmaking and resin infusion vacuum bag applications, it offers low viscosity, high tear cut resist...展開 BLUESIL RTV 1556 is a two component, high strength, addition cure, room temperature or heat vulcanized silicone rubber compound. Designed specifically for moldmaking and resin infusion vacuum bag applications, it offers low viscosity, high tear cut resistance, and easy release for long lasting molds. BLUESIL RTV 1556 has high temperature and chemical resistance with excellent flexibility, low shrinkage, and excellent detail reproduction which makes it well suited for production and prototyping use with all types of casting resins. 收起 | |
| BLUESIL RTV 1597 A | Elkem Silicones | BLUESIL RTV 1597 is a two component, medium hardness, high strength, addition cure, room temperature or heat curing silicone elastomer. Designed specifically for moldmaking applications, it offers low viscosity, high tear and cut resistance, and easy rele...展開 BLUESIL RTV 1597 is a two component, medium hardness, high strength, addition cure, room temperature or heat curing silicone elastomer. Designed specifically for moldmaking applications, it offers low viscosity, high tear and cut resistance, and easy release for long lasting molds. BLUESIL RTV 1597 has high temperature and chemical resistance with excellent flexibility, low shrinkage, and well-defined detail reproduction, making it ideal for prototyping applications. 收起 | |
| BLUESIL RTV 3040 A | Elkem Silicones | BLUESIL RTV 3040 A is a two component silicone elastomer which is available in 5 versions with different features. It crosslinks at room temperature by polyaddition reaction. The polymerisation can be accelerated by heat (max. 150°C). The silicone compone...展開 BLUESIL RTV 3040 A is a two component silicone elastomer which is available in 5 versions with different features. It crosslinks at room temperature by polyaddition reaction. The polymerisation can be accelerated by heat (max. 150°C). The silicone components are delivered as two viscous liquids, which once mixed and cured, transform into a transparent, elastic and resistant material. Polymerisation occurs without production of heat. 收起 | |
| BLUESIL RTV 3040 B | Elkem Silicones | BLUESIL RTV 3040 B is a two component silicone elastomer which is available in 5 versions with different features. It crosslinks at room temperature by polyaddition reaction. The polymerisation can be accelerated by heat (max. 150°C). The silicone compone...展開 BLUESIL RTV 3040 B is a two component silicone elastomer which is available in 5 versions with different features. It crosslinks at room temperature by polyaddition reaction. The polymerisation can be accelerated by heat (max. 150°C). The silicone components are delivered as two viscous liquids, which once mixed and cured, transform into a transparent, elastic and resistant material. Polymerisation occurs without production of heat. 收起 | |
| BLUESIL RTV 3040 HARD A 1/1 | Elkem Silicones | BLUESIL RTV 3040 HARD A 1/1 is a two component silicone elastomer which is available in 5 versions with different features. It crosslinks at room temperature by polyaddition reaction. The polymerisation can be accelerated by heat (max. 150°C). The silicon...展開 BLUESIL RTV 3040 HARD A 1/1 is a two component silicone elastomer which is available in 5 versions with different features. It crosslinks at room temperature by polyaddition reaction. The polymerisation can be accelerated by heat (max. 150°C). The silicone components are delivered as two viscous liquids, which once mixed and cured, transform into a transparent, elastic and resistant material. Polymerisation occurs without production of heat. 收起 | |
| BLUESIL RTV 3040 HARD B | Elkem Silicones | BLUESIL RTV 3040 HARD B is a two component silicone elastomer which is available in 5 versions with different features. It crosslinks at room temperature by polyaddition reaction. The polymerisation can be accelerated by heat (max. 150°C). The silicone co...展開 BLUESIL RTV 3040 HARD B is a two component silicone elastomer which is available in 5 versions with different features. It crosslinks at room temperature by polyaddition reaction. The polymerisation can be accelerated by heat (max. 150°C). The silicone components are delivered as two viscous liquids, which once mixed and cured, transform into a transparent, elastic and resistant material. Polymerisation occurs without production of heat. 收起 | |
| BLUESIL RTV 3040 LV B | Elkem Silicones | BLUESIL RTV 3040 LV B is a two component silicone elastomer which is available in 5 versions with different features. It crosslinks at room temperature by polyaddition reaction. The polymerisation can be accelerated by heat (max. 150°C). The silicone comp...展開 BLUESIL RTV 3040 LV B is a two component silicone elastomer which is available in 5 versions with different features. It crosslinks at room temperature by polyaddition reaction. The polymerisation can be accelerated by heat (max. 150°C). The silicone components are delivered as two viscous liquids, which once mixed and cured, transform into a transparent, elastic and resistant material. Polymerisation occurs without production of heat. 收起 | |
| BLUESIL RTV 3040 QC A | Elkem Silicones | BLUESIL RTV 3040 QC A is a two component silicone elastomer which is available in 5 versions with different features. It crosslinks at room temperature by polyaddition reaction. The polymerisation can be accelerated by heat (max. 150°C). The silicone comp...展開 BLUESIL RTV 3040 QC A is a two component silicone elastomer which is available in 5 versions with different features. It crosslinks at room temperature by polyaddition reaction. The polymerisation can be accelerated by heat (max. 150°C). The silicone components are delivered as two viscous liquids, which once mixed and cured, transform into a transparent, elastic and resistant material. Polymerisation occurs without production of heat. 收起 | |
| BLUESIL RTV 3040 QC B | Elkem Silicones | BLUESIL RTV 3040 QC B is a two component silicone elastomer which is available in 5 versions with different features. It crosslinks at room temperature by polyaddition reaction. The polymerisation can be accelerated by heat (max. 150°C). The silicone comp...展開 BLUESIL RTV 3040 QC B is a two component silicone elastomer which is available in 5 versions with different features. It crosslinks at room temperature by polyaddition reaction. The polymerisation can be accelerated by heat (max. 150°C). The silicone components are delivered as two viscous liquids, which once mixed and cured, transform into a transparent, elastic and resistant material. Polymerisation occurs without production of heat. 收起 | |
| BLUESIL RTV 3040 SB B | Elkem Silicones | BLUESIL RTV 3040 SB B is a two component silicone elastomer which is available in 5 versions with different features. It crosslinks at room temperature by polyaddition reaction. The polymerisation can be accelerated by heat (max. 150°C). The silicone comp...展開 BLUESIL RTV 3040 SB B is a two component silicone elastomer which is available in 5 versions with different features. It crosslinks at room temperature by polyaddition reaction. The polymerisation can be accelerated by heat (max. 150°C). The silicone components are delivered as two viscous liquids, which once mixed and cured, transform into a transparent, elastic and resistant material. Polymerisation occurs without production of heat. 收起 | |
| BLUESIL RTV 3120 A | Elkem Silicones | BLUESIL RTV 3120 A is a two component silicone elastomer which cures at room temperature by a polyaddition reaction. This reaction can be accelerated by heat. | |
| BLUESIL RTV 3122 | Elkem Silicones | BLUESIL RTV 3122 + 2% Catalyst 68 is a silicone elastomer with two components, crosslinking at room temperature by a polycondensation reaction. | |
| BLUESIL RTV 3130 A | Elkem Silicones | BLUESIL RTV 3130 A&B, RTV 3131 A&B, RTV 3131 A&B SC and RTV 3132 A&B are two component silicone elastomers which cure at room temperature by a polyaddition reaction. This reaction can be accelerated by heat. | |
| BLUESIL RTV 3220 LV | Elkem Silicones | BLUESIL RTV 3220 LV is a silicone elastomer which cures at room temperature by a polycondensation reaction. After the addition of catalyst BLUESIL CATA 2H, it cures at room temperature and leads to flexible and elastic material. | |
| BLUESIL RTV 3221 | Elkem Silicones | BLUESIL RTV 3221 is a silicone elastomer which, after the addition of catalyst, cures at room temperature and leads to flexible and elastic material. | |
| BLUESIL RTV 3223 | Elkem Silicones | BLUESIL RTV 3223 is a two-component silicone elastomer which, after the addition of CATA 2H, cures at room temperature and leads to flexible and elastic material. | |
| BLUESIL RTV 3240 | Elkem Silicones | BLUESIL RTV 3240 is a silicone elastomer which, after the addition of BLUESIL CATA N, cures at room temperature and leads to flexible and elastic material. The crosslinking reaction occurs, without release of heat, the formation of isopropanol, whose disp...展開 BLUESIL RTV 3240 is a silicone elastomer which, after the addition of BLUESIL CATA N, cures at room temperature and leads to flexible and elastic material. The crosslinking reaction occurs, without release of heat, the formation of isopropanol, whose dispersion is required before used of the mould or the protected object 收起 | |
| BLUESIL RTV 3245 | Elkem Silicones | BLUESIL RTV 3245 is is a silicone elastomer which, after the addition of BLUESIL CATA C cures at room temperature and leads to a flexible and elastic material. | |
| BLUESIL RTV 3310 | Elkem Silicones | BLUESIL RTV 3310 is a silicone elastomer which, after the addition of catalysts BLUESIL CATA 6H or BLUESIL CATA 24H, cures at room temperature by a polycondensation reaction and leads to a flexible and elastic material. | |
| BLUESIL RTV 3318 | Elkem Silicones | BLUESIL RTV 3318 is a silicone elastomer which, after the addition of a catalyst, cures at room temperature and leads to a flexible and elastic material. | |
| BLUESIL RTV 3318 SPU | Elkem Silicones | BLUESIL RTV 3318 SPU, is a silicone elastomer which, after the addition of catalyst BLUESIL CATA SPU, cures at room temperature by a polycondensation reaction, leading to a flexible and elastic material. | |
| BLUESIL RTV 3322 | Elkem Silicones | BLUESIL RTV 3322 is a silicone elastomer which, after the addition of catalysts BLUESIL 24H or BLUESIL 6H, cures at room temperature and leads to a flexible and elastic material. | |
| BLUESIL RTV 3325 | Elkem Silicones | BLUESIL RTV 3325 is a silicone elastomer which, after the addition of a catalyst, cures at room temperature and leads to a flexible and elastic material. | |
| BLUESIL RTV 3325 P | Elkem Silicones | BLUESIL RTV 3325 P is a two-component silicone elastomer which upon reaction at room temperature through the addition of BLUESIL CATA 83 acquires good mechanical and resilient properties. | |
| BLUESIL RTV 3330 SPU | Elkem Silicones | BLUESIL RTV 3330 SPU, is a silicone elastomer which, after the addition of catalyst BLUESIL CATA SPU, cures at room temperature by a polycondensation reaction, leading to a flexible and elastic material. | |
| BLUESIL RTV 3335 SPU | Elkem Silicones | BLUESIL RTV 3335 SPU, is a silicone elastomer which, after the addition of catalyst BLUESIL CATA SPU, cures at room temperature by a polycondensation reaction, leading to a flexible and elastic material. | |
| BLUESIL RTV 3410 A QC | Elkem Silicones | BLUESIL RTV 3410 QC A is a two component, silicone elastomers which cures at room temperature by a polyaddition reaction and leads to a resistant and elastic material. | |
| BLUESIL RTV 3428 A | Elkem Silicones | BLUESIL RTV 3428 A is a two component silicone elastomer which cures at room temperature by a polyaddition reaction. This reaction can be accelerated by heat. | |
| BLUESIL RTV 3430 SB A | Elkem Silicones | BLUESIL RTV 3430 SB A – is a two component, silicone elastomers which cures at room temperature by a polyaddition reaction. | |
| BLUESIL RTV 3433 A | Elkem Silicones | BLUESIL RTV 3433 A is a two component, silicone elastomer which cures at room temperature by a polyaddition reaction (10:1 ratio). | |
| BLUESIL RTV 3436 A | Elkem Silicones | BLUESIL RTV 3436 A – is a two component, silicone elastomer which cures at room temperature by a polyaddition reaction (10:1 ratio). The product is available in two color versions: BLUESIL RTV 3436 A&B: Red BLUESIL RTV 3436 TL A&B: Colorless | |
| BLUESIL RTV 3436 A TRANSLUCENT | Elkem Silicones | BLUESIL RTV 3436 A – is a two component, silicone elastomer which cures at room temperature by a polyaddition reaction (10:1 ratio). The product is available in two color versions: BLUESIL RTV 3436 A&B: Red BLUESIL RTV 3436 TL A&B: Colorless | |
| BLUESIL RTV 3440 A | Elkem Silicones | BLUESIL RTV 3440 A is a two component silicone elastomers that crosslink at room temperature by polyaddition reaction. The polymerisation can be accelerated by heat. The silicone materials are delivered as two viscous liquid components, which once mixed a...展開 BLUESIL RTV 3440 A is a two component silicone elastomers that crosslink at room temperature by polyaddition reaction. The polymerisation can be accelerated by heat. The silicone materials are delivered as two viscous liquid components, which once mixed and cured, transform into an elastic and resistant elastomer. Polymerisation occurs without production of heat. 收起 | |
| BLUESIL RTV 3445 A | Elkem Silicones | BLUESIL RTV 3445 A is a two component silicone elastomers that crosslink at room temperature by polyaddition reaction. The polymerisation can be accelerated by heat. The silicone materials are delivered as two viscous liquid components, which once mixed a...展開 BLUESIL RTV 3445 A is a two component silicone elastomers that crosslink at room temperature by polyaddition reaction. The polymerisation can be accelerated by heat. The silicone materials are delivered as two viscous liquid components, which once mixed and cured, transform into an elastic and resistant elastomer. Polymerisation occurs without production of heat. 收起 | |
| BLUESIL RTV 3450 A | Elkem Silicones | BLUESIL RTV 3450 A is a two component silicone elastomers that crosslink at room temperature by polyaddition reaction. The polymerisation can be accelerated by heat. The silicone materials are delivered as two viscous liquid components, which once mixed a...展開 BLUESIL RTV 3450 A is a two component silicone elastomers that crosslink at room temperature by polyaddition reaction. The polymerisation can be accelerated by heat. The silicone materials are delivered as two viscous liquid components, which once mixed and cured, transform into an elastic and resistant elastomer. Polymerisation occurs without production of heat. 收起 | |
| BLUESIL RTV 3460 A | Elkem Silicones | BLUESIL RTV 3460 A is a two component silicone elastomers that crosslink at room temperature by polyaddition reaction. The polymerisation can be accelerated by heat. The silicone materials are delivered as two viscous liquid components, which once mixed a...展開 BLUESIL RTV 3460 A is a two component silicone elastomers that crosslink at room temperature by polyaddition reaction. The polymerisation can be accelerated by heat. The silicone materials are delivered as two viscous liquid components, which once mixed and cured, transform into an elastic and resistant elastomer. Polymerisation occurs without production of heat. 收起 | |
| BLUESIL RTV 3503 A | Elkem Silicones | BLUESIL RTV 3503 A is a two component silicone elastomer which cures at room temperature by a polyaddition reaction. This reaction can be accelerated by heat. | |
| BLUESIL RTV 3512 A | Elkem Silicones | BLUESIL RTV 3512 A is a two component silicone elastomer which cures at room temperature by a polyaddition reaction (1:1 ratio). The product is available in following versions: - BLUESIL RTV 3512 A&B (colors ORANGE or YELLOW) - BLUESIL RTV 3512 NB A&B (No...展開 BLUESIL RTV 3512 A is a two component silicone elastomer which cures at room temperature by a polyaddition reaction (1:1 ratio). The product is available in following versions: - BLUESIL RTV 3512 A&B (colors ORANGE or YELLOW) - BLUESIL RTV 3512 NB A&B (No Bleeding) - BLUESIL RTV 3512 NB QC A&B (No Bleeding, Quick Curing) 收起 | |
| BLUESIL RTV 3512 NB A | Elkem Silicones | BLUESIL RTV 3512 NB A is a two component silicone elastomer which cures at room temperature by a polyaddition reaction (1:1 ratio). The product is available in following versions: BLUESIL RTV 3512 A&B (colors ORANGE or YELLOW) BLUESIL RTV 3512 NB A&B (...展開 BLUESIL RTV 3512 NB A is a two component silicone elastomer which cures at room temperature by a polyaddition reaction (1:1 ratio). The product is available in following versions: BLUESIL RTV 3512 A&B (colors ORANGE or YELLOW) BLUESIL RTV 3512 NB A&B (No Bleeding) BLUESIL RTV 3512 NB QC A&B (No Bleeding, Quick Curing) 收起 | |
| BLUESIL RTV 3520 A | Elkem Silicones | BLUESIL RTV 3520 A is a two component, silicone elastomer which cures at room temperature by a polyaddition reaction (1:1 ratio). | |
| BLUESIL RTV 3522 A | Elkem Silicones | BLUESIL RTV 3522 A is a two component, silicone elastomer which cures at room temperature by a polyaddition reaction (1:1 ratio). | |
| BLUESIL RTV 3527 A | Elkem Silicones | BLUESIL RTV 3527 A is a two component, silicone elastomer which cures at room temperature by a polyaddition reaction (1:1 ratio). Aiming at satisfying different application requirements BLUESIL RTV 3527 A&B is available in 3 color versions and a Quick Cur...展開 BLUESIL RTV 3527 A is a two component, silicone elastomer which cures at room temperature by a polyaddition reaction (1:1 ratio). Aiming at satisfying different application requirements BLUESIL RTV 3527 A&B is available in 3 color versions and a Quick Curing (QC) version. 收起 | |
| BLUESIL RTV 3527 A QC | Elkem Silicones | BLUESIL RTV 3527 A QC is a two component, silicone elastomer which cures at room temperature by a polyaddition reaction (1:1 ratio). Aiming at satisfying different application requirements BLUESIL RTV 3527 A&B is available in 3 color versions and a Quick ...展開 BLUESIL RTV 3527 A QC is a two component, silicone elastomer which cures at room temperature by a polyaddition reaction (1:1 ratio). Aiming at satisfying different application requirements BLUESIL RTV 3527 A&B is available in 3 color versions and a Quick Curing (QC) version. 收起 | |
| BLUESIL RTV 3530 A | Elkem Silicones | BLUESIL RTV 3530 A is a two component, silicone elastomer which cures at room temperature by a polyaddition reaction (1:1 ratio). | |
| BLUESIL RTV 3535 A | Elkem Silicones | BLUESIL RTV 3535 A – is a two component, silicone elastomer which cures at room temperature by a polyaddition reaction (1:1 ratio). The BLUESIL RTV 3535 A&B is available in two colours: WHITE and TRANSLUCENT. | |
| BLUESIL RTV 3535 P A | Elkem Silicones | BLUESIL RTV 3535 P A is a two-component silicone elastomer which cures at room temperature by a polyaddition reaction and leads to a flexible and elastic material. | |
| BLUESIL RTV 3542 A QC TRANSLUCENT | Elkem Silicones | BLUESIL RTV 3542 A QC is a two component, silicone elastomer which cures at room temperature by a polyaddition reaction (1:1 ratio). Aiming at satisfying different application requirements, BLUESIL RTV 3542 A&B is available in 3 versions:BLUESIL RTV 3542...展開 BLUESIL RTV 3542 A QC is a two component, silicone elastomer which cures at room temperature by a polyaddition reaction (1:1 ratio). Aiming at satisfying different application requirements, BLUESIL RTV 3542 A&B is available in 3 versions:BLUESIL RTV 3542 A&B BLUESIL RTV 3542 A&B HV (High Viscosity)BLUESIL RTV 3542 A&B QC (Quick Curing) 收起 | |
| BLUESIL RTV 3625 | Elkem Silicones | BLUESIL RTV 3625 is a low viscosity, 25 Durometer (Shore A), two component, tin catalyzed, room temperature curing silicone elastomer. It is designed as a high strength elastomer with good cured rubber properties, long library life and accurate detail rep...展開 BLUESIL RTV 3625 is a low viscosity, 25 Durometer (Shore A), two component, tin catalyzed, room temperature curing silicone elastomer. It is designed as a high strength elastomer with good cured rubber properties, long library life and accurate detail reproduction.BLUESIL RTV 3625 can be catalyzed with BLUESIL HI-PRO GREEN, fast settingBLUESIL HI-PRO BLUE, or BLUESIL CATA 58R. 收起 | |
| BLUESIL RTV 3720 A | Elkem Silicones | BLUESIL RTV 3720 A is a two component silicone elastomer which cures at room temperature by a polyaddition reaction (1:1 ratio). The material can be applied onto horizontal as well as vertical surfaces thanks to its slight thixotropic behaviour, by means ...展開 BLUESIL RTV 3720 A is a two component silicone elastomer which cures at room temperature by a polyaddition reaction (1:1 ratio). The material can be applied onto horizontal as well as vertical surfaces thanks to its slight thixotropic behaviour, by means of casting or solventless spraying in both cases a silicone film is obtained. The product is available in two versions:RTV 3720 A&B: fast cure, for spray applicationRTV 3720 SC A&B: slow cure, for casting application 收起 | |
| BLUESIL RTV 3720 SC A | Elkem Silicones | BLUESIL RTV 3720 SC A is a two component silicone elastomer which cures at room temperature by a polyaddition reaction (1:1 ratio). The material can be applied onto horizontal as well as vertical surfaces thanks to its slight thixotropic behaviour, by mea...展開 BLUESIL RTV 3720 SC A is a two component silicone elastomer which cures at room temperature by a polyaddition reaction (1:1 ratio). The material can be applied onto horizontal as well as vertical surfaces thanks to its slight thixotropic behaviour, by means of casting or solventless spraying in both cases a silicone film is obtained. The product is available in two versions:RTV 3720 A&B: fast cure, for spray applicationRTV 3720 SC A&B: slow cure, for casting application 收起 | |
| BLUESIL RTV 3825 | Elkem Silicones | BLUESIL RTV 3825 is a two component silicone elastomer, crosslinking at room temperature by reaction of polycondensation. It yields a soft flexible, elastic material presenting excellent tear resistance. | |
| BLUESIL SDS CAT CLEAR | Elkem Silicones | BLUESIL SDS CATA CLEAR is a thixotropic catalyst for condensation cure moldmaking products such as BLUESIL V 1065A and BLUESIL V 1067A. |
