| 99.99% Conductive Shining Flake Silver Powder | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | 99.99% Conductive Shining Flake Silver Powders are different silver powder products are chosen according to different use conditions. Low apparent density flake silver powders is the main raw material in production of conductive coating, membrane switch, ...展開 99.99% Conductive Shining Flake Silver Powders are different silver powder products are chosen according to different use conditions. Low apparent density flake silver powders is the main raw material in production of conductive coating, membrane switch, conductive inks, conductive rubber, conductive plastic, conductive ceramics.Low apparent density flake silver powder is mainly used in the low temperature electronic paste, conductive inks, conductive coatings, electromagnetic shielding coatings. the coating configurated by flake silver powder, whose liquidity and resistance to settlement is good, the coating area is large. 收起 | |
| 99.99% Conductive Silver Powder (Spherical) | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | 99.99% Conductive Silver Powder (Spherical) are widely used in electronic pastes, electronic products, electrical conductivity, electromagnetic shielding, anti-bacterial, and anti-virus applications. | |
| Acetylated Distarch Ddipate | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Acetylated Distarch Ddipate has a certain ability of anti-acid and anti-alkali, anti-cutting ability, is of good viscosity. It is used it as thickening agent, premium quality stabiliser in wallpaper adhesive. | |
| Acetylated Distarch Phosphate | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Acetylated Distarch Phosphate is a fine white to off white powder with characteristic starch taste and odor. Compared with the original starch, the solubility, swelling power and transparency were significantly increased, the aging tendency was significan...展開 Acetylated Distarch Phosphate is a fine white to off white powder with characteristic starch taste and odor. Compared with the original starch, the solubility, swelling power and transparency were significantly increased, the aging tendency was significantly decreased, and the freezing stability was improved. This product is heat-resistant and acid-resistant. It is used it as thickening agent in wallpaper adhesive. 收起 | |
| Acid Black 10BX | Camex Limited | Acid Black 10BX is an acid dyestuff. This product's generic name is Acid Black 1. It can be used to dye nylon. | |
| Acid Black AB | Camex Limited | Acid Black AB is an acid dyestuff. This product's generic name is Acid Black 210. It can be used to dye nylon. | |
| Acid Black LDN | Camex Limited | Acid Black LDN is an acid dyestuff. This product's generic name is Acid Black 172. It can be used to dye nylon. | |
| Acid Black MSRL | Camex Limited | Acid Black MSRL is an acid dyestuff. This product's generic name is Acid Black 194. It can be used to dye nylon. | |
| Acid Black NBR | Camex Limited | Acid Black NBR is an acid dyestuff. This product's generic name is Acid Black 234. It can be used to dye nylon. | |
| Acid Black WA | Camex Limited | Acid Black WA is an acid dyestuff. This product's generic name is Acid Black 52. It can be used to dye nylon. | |
| Acid Brillient Commase Fast Blue 2R | Camex Limited | Acid Brillient Commase Fast Blue 2R is an acid dyestuff. This product's generic name is Acid Blue 92. It can be used to dye nylon. | |
| Acid Brown ER | Camex Limited | Acid Brown ER is an acid dyestuff. This product's generic name is Acid Brown 75. It can be used to dye nylon. | |
| Acid Brown GB | Camex Limited | Acid Brown GB is an acid dyestuff. This product's generic name is Acid Brown 161. It can be used to dye nylon. | |
| Acid Brown NT | Camex Limited | Acid Brown NT is an acid dyestuff. This product's generic name is Acid Brown 165. It can be used to dye nylon. | |
| Acid Dark Blue MTR | Camex Limited | Acid Dark Blue MTR is an acid dyestuff. This product's generic name is Acid Blue 193. It can be used to dye nylon. | |
| Acid Fast Brown ESR | Camex Limited | Acid Fast Brown ESR is an acid dyestuff. This product's generic name is Acid Brown 348. It can be used to dye nylon. | |
| Acid Fast Navy Blue S5R/2RNS | Camex Limited | Acid Fast Navy Blue S5R/2RNS is an acid dyestuff. This product's generic name is Acid Blue 113. It can be used to dye nylon. | |
| Acid Green V | Camex Limited | Acid Green V is an acid dyestuff. This product's generic name is Acid Green 16. It can be used to dye nylon. | |
| Acid Light Fast Yellow G | Camex Limited | Acid Light Fast Yellow G is an acid dyestuff. This product's generic name is Acid Yellow 11. It can be used to dye nylon. | |
| Acid Maroon V | Camex Limited | Acid Maroon V is an acid dyestuff. This product's generic name is Acid Red 119. It can be used to dye nylon. | |
| Acid Orange Brown BT | Camex Limited | Acid Orange Brown BT is an acid dyestuff. This product's generic name is Acid Brown 106. It can be used to dye nylon. | |
| Acid Orange II | Camex Limited | Acid Orange II is an acid dyestuff. This product's generic name is Acid Orange 7. It can be used to dye nylon. | |
| Acid Red 3BN | Camex Limited | Acid Red 3BN is an acid dyestuff. This product's generic name is Acid Red 131. It can be used to dye nylon. | |
| Acid Scarlet G | Camex Limited | Acid Scarlet G is an acid dyestuff. This product's generic name is Acid Red 97. It can be used to dye nylon. | |
| Acid Yellow 5GN | Camex Limited | Acid Yellow 5GN is an acid dyestuff. This product's generic name is Acid Yellow 110. It can be used to dye nylon. | |
| Acid Yellow MR | Camex Limited | Acid Yellow MR is an acid dyestuff. This product's generic name is Acid Yellow-42. It can be used to dye nylon. | |
| Alkylsulfonic Acid Ester of Phenol Plasticizer | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Alkylsulfonic acid ester of phenol is a common environmental friendly plasticizer.It possess excellent plasticizing and saponifying effect are suitable for various types of polymers such as PU and PVC. | |
| Black B | Camex Limited | Black B is a dye based on a vinyl sulphone group, which makes this product readily soluble in warm water. It can be used in dyeing and printing, especially in discharge printing. | |
| Black BG H/Cons. | Camex Limited | Black BG H/Cons. is a dye based on a vinyl sulphone group, which makes this product readily soluble in warm water. It can be used in dyeing and printing, especially in discharge printing. | |
| Black C 150 | Camex Limited | Black C 150 is a dye based on a vinyl sulphone group, which makes this product readily soluble in warm water. It can be used in dyeing and printing, especially in discharge printing. | |
| Black CAPV | Camex Limited | Black CAPV is a pigment emulsion. This product is a dispersed organic pigment. It can be used for printing applications on cotton, viscose, nylon, polyester, fabrics, and their blends. | |
| Black CFC | Camex Limited | Black CFC is a dye based on a vinyl sulphone group, which makes this product readily soluble in warm water. It can be used in dyeing and printing, especially in discharge printing. | |
| Black CNF | Camex Limited | Black CNF is a bi-functional reactive dye. This product works well on cottons, viscose, and their blends, because of their consistency and dependability. It can be used in printing and coatings. | |
| Black CNN | Camex Limited | Black CNN is a dye based on a vinyl sulphone group, which makes this product readily soluble in warm water. It can be used in dyeing and printing, especially in discharge printing. | |
| Black HEBL | Camex Limited | Black HEBL is a bis monochlorotriazine reactive dye with low reactivity and higher substantivity. This product is characterized by high exhaustion and fixation values. It can be used in printing and coatings, especially in yarns, fiber, piece dyeing and...展開 Black HEBL is a bis monochlorotriazine reactive dye with low reactivity and higher substantivity. This product is characterized by high exhaustion and fixation values. It can be used in printing and coatings, especially in yarns, fiber, piece dyeing and garments. 收起 | |
| Black HFGR | Camex Limited | Black HFGR is a dye based on a vinyl sulphone group, which makes this product readily soluble in warm water. It can be used in dyeing and printing, especially in discharge printing. | |
| Black HFRD | Camex Limited | Black HFRD is a dye based on a vinyl sulphone group, which makes this product readily soluble in warm water. It can be used in dyeing and printing, especially in discharge printing. | |
| Black HGR | Camex Limited | Black HGR is a dye based on a vinyl sulphone group, which makes this product readily soluble in warm water. It can be used in dyeing and printing, especially in discharge printing. | |
| Black HN | Camex Limited | Black HN is a monochlorotriazine reactive dye. Because this product has a single chlorine group, it has low reactivity. It therefore requires severe conditions of fixation with cotton fabric. It can be used on cotton fabric for printing and coatings. | |
| Black RL | Camex Limited | Black RL is a dye based on a vinyl sulphone group, which makes this product readily soluble in warm water. It can be used in dyeing and printing, especially in discharge printing. | |
| Blue 3R | Camex Limited | Blue 3R is a dye based on a vinyl sulphone group, which makes this product readily soluble in warm water. It can be used in dyeing and printing, especially in discharge printing. | |
| Blue 5RH | Camex Limited | Blue 5RH is a monochlorotriazine reactive dye. Because this product has a single chlorine group, it has low reactivity. It therefore requires severe conditions of fixation with cotton fabric. It can be used on cotton fabric for printing and coatings. | |
| Blue BB | Camex Limited | Blue BB is a bi-functional reactive dye. This product works well on cottons, viscose, and their blends, because of their consistency and dependability. It can be used in printing and coatings. | |
| Blue BRF | Camex Limited | Blue BRF is a bi-functional reactive dye. This product works well on cottons, viscose, and their blends, because of their consistency and dependability. It can be used in printing and coatings. | |
| Blue CAFG | Camex Limited | Blue CAFG is a pigment emulsion. This product is a dispersed organic pigment. It can be used for printing applications on cotton, viscose, nylon, polyester, fabrics, and their blends. | |
| Blue CAFR | Camex Limited | Blue CAFR is a pigment emulsion. This product is a dispersed organic pigment. It can be used for printing applications on cotton, viscose, nylon, polyester, fabrics, and their blends. | |
| Blue H2GP | Camex Limited | Blue H2GP is a dye based on a vinyl sulphone group, which makes this product readily soluble in warm water. It can be used in dyeing and printing, especially in discharge printing. | |
| Blue HERD | Camex Limited | Blue HERD is a bis monochlorotriazine reactive dye with low reactivity and higher substantivity. This product is characterized by high exhaustion and fixation values. It can be used in printing and coatings, especially in yarns, fiber, piece dyeing and ...展開 Blue HERD is a bis monochlorotriazine reactive dye with low reactivity and higher substantivity. This product is characterized by high exhaustion and fixation values. It can be used in printing and coatings, especially in yarns, fiber, piece dyeing and garments. 收起 | |
| Blue HGR | Camex Limited | Blue HGR is a monochlorotriazine reactive dye. Because this product has a single chlorine group, it has low reactivity. It therefore requires severe conditions of fixation with cotton fabric. It can be used on cotton fabric for printing and coatings. | |
| Blue M2R | Camex Limited | Blue M2R is a dichloro-triazine reactive dye. This product is highly reactive and therefore does not require strong conditioning for fixation with cellulose materials. It can be used in printing and coatings. | |
| Blue M4GD | Camex Limited | Blue M4GD is a dichloro-triazine reactive dye. This product is highly reactive and therefore does not require strong conditioning for fixation with cellulose materials. It can be used in printing and coatings. | |
| Blue ME2RL | Camex Limited | Blue ME2RL is a bi-functional reactive dye. This product works well on cottons, viscose, and their blends, because of their consistency and dependability. It can be used in printing and coatings. | |
| Blue MGN | Camex Limited | Blue MGN is a dichloro-triazine reactive dye. This product is highly reactive and therefore does not require strong conditioning for fixation with cellulose materials. It can be used in printing and coatings. | |
| Blue MR | Camex Limited | Blue MR is a dichloro-triazine reactive dye. This product is highly reactive and therefore does not require strong conditioning for fixation with cellulose materials. It can be used in printing and coatings. | |
| Blue MX2G | Camex Limited | Blue MX2G is a dichloro-triazine reactive dye. This product is highly reactive and therefore does not require strong conditioning for fixation with cellulose materials. It can be used in printing and coatings. | |
| Blue MX7R | Camex Limited | Blue MX7R is a dichloro-triazine reactive dye. This product is highly reactive and therefore does not require strong conditioning for fixation with cellulose materials. It can be used in printing and coatings. | |
| Blue R | Camex Limited | Blue R is a dye based on a vinyl sulphone group, which makes this product readily soluble in warm water. It can be used in dyeing and printing, especially in discharge printing. | |
| Blue RR | Camex Limited | Blue RR is a bi-functional reactive dye. This product works well on cottons, viscose, and their blends, because of their consistency and dependability. It can be used in printing and coatings. | |
| BLUESIL ACC PA 39 | Elkem Silicones | BLUESIL ACC PA 39 is an additive that reduces the reaction time of those RTV-2 silicone elastomers that cure by a polyaddition reaction. Both the working time (i.e. the time until the product can be processed, also called pot-life or open-time) and the ta...展開 BLUESIL ACC PA 39 is an additive that reduces the reaction time of those RTV-2 silicone elastomers that cure by a polyaddition reaction. Both the working time (i.e. the time until the product can be processed, also called pot-life or open-time) and the tack-free time (i.e. the time to achieve the final elastomeric properties, also called setting or curing time) will be shortened by the addition of BLUESIL ACC PA 39. 收起 | |
| BLUESIL ADD 11013 | Elkem Silicones | BLUESIL ADD 11013 is a polyether-modified polydimethylsiloxane for use in solventless paints and varnishes, and in water-based paints and inks. | |
| BLUESIL ADD PC THIXO | Elkem Silicones | BLUESIL ADD PC THIXO is an additive designed to reduce the flowability of certain RTV- the BLUESIL range. | |
| BLUESIL ADDITIVE PA THIXO | Elkem Silicones | BLUESIL ADD PA THIXO (Thixotropic Additive) is a rheology modifier for RTV-2 silicones that imparts a thixotropic behavior to the silicone. Its high efficiency allows to reach the non-flow condition with a limited amount added. | |
| BLUESIL CA-35 BLUE | Elkem Silicones | BLUESIL CA-35 BLUE is used primarily with BLUESIL V-330 and BLUESIL V-340. It provides variable hardness of curing for these products. BLUESIL V-330 is a two component, addition cure, room temperature or heat accelerated cure silicone rubber compound. It ...展開 BLUESIL CA-35 BLUE is used primarily with BLUESIL V-330 and BLUESIL V-340. It provides variable hardness of curing for these products. BLUESIL V-330 is a two component, addition cure, room temperature or heat accelerated cure silicone rubber compound. It is designed as a variable hardness rubber with high strength properties, long library life, excellent detail reproduction, excellent release characteristics, and improved resistance to inhibition. The specific hardness is dependent on which curing agent is used. BLUESIL V-330 is an excellent choice for pattern shop, model shop, and Stereolithography service bureau mold making and tooling applications. 收起 | |
| BLUESIL CA-35 FC | Elkem Silicones | BLUESIL CA-35 FC Catalyst is a two component, addition cure, room temperature or heat accelerated cure silicone rubber compound. It is designed as a variable hardness rubber with high strength properties, long library life, excellent detail reproduction, ...展開 BLUESIL CA-35 FC Catalyst is a two component, addition cure, room temperature or heat accelerated cure silicone rubber compound. It is designed as a variable hardness rubber with high strength properties, long library life, excellent detail reproduction, excellent release characteristics, and improved resistance to inhibition. The specific hardness is dependent on which curing agent is used. BLUESIL V-330 + FC Catalyst is an excellent choice for pattern shop, model shop, and Stereolithography service bureau mold making and tooling applications. 收起 | |
| BLUESIL CA-45 FC | Elkem Silicones | BLUESIL CA-45 FC Catalyst is a two component, addition cure, room temperature or heat accelerated cure silicone rubber compound. It is designed as a variable hardness rubber with high strength properties, long library life, excellent detail reproduction, ...展開 BLUESIL CA-45 FC Catalyst is a two component, addition cure, room temperature or heat accelerated cure silicone rubber compound. It is designed as a variable hardness rubber with high strength properties, long library life, excellent detail reproduction, excellent release characteristics, and improved resistance to inhibition. The specific hardness is dependent on which curing agent is used. BLUESIL V-330 + FC Catalyst is an excellent choice for pattern shop, model shop, and Stereolithography service bureau mold making and tooling applications. 收起 | |
| BLUESIL CA-55 FC | Elkem Silicones | BLUESIL CA-55 FC Catalyst is a two component, addition cure, room temperature or heat accelerated cure silicone rubber compound. It is designed as a variable hardness rubber with high strength properties, long library life, excellent detail reproduction, ...展開 BLUESIL CA-55 FC Catalyst is a two component, addition cure, room temperature or heat accelerated cure silicone rubber compound. It is designed as a variable hardness rubber with high strength properties, long library life, excellent detail reproduction, excellent release characteristics, and improved resistance to inhibition. The specific hardness is dependent on which curing agent is used. BLUESIL V-330 + FC Catalyst is an excellent choice for pattern shop, model shop, and Stereolithography service bureau mold making and tooling applications. 收起 | |
| BLUESIL CATA 24H | Elkem Silicones | BLUESIL CATA 24H is a catalyst that cures at room temperature and leads to a flexible and elastic material BLUESIL RTV 3322. | |
| BLUESIL CATA 6H | Elkem Silicones | BLUESIL CATA 6H is a catalyst that cures at room temperature and leads to a flexible and elastic material BLUESIL RTV 3322. | |
| BLUESIL CATA HI PRO BLUE | Elkem Silicones | BLUESIL CATA HI-PRO BLUE is an organotin carboxylate with additives. It is the standard catalyst for the BLUESIL V-1060 series of moldmaking rubber compounds. BLUESIL CATA HI-PRO BLUE provides deep section cure capability, extremely fast hardness developm...展開 BLUESIL CATA HI-PRO BLUE is an organotin carboxylate with additives. It is the standard catalyst for the BLUESIL V-1060 series of moldmaking rubber compounds. BLUESIL CATA HI-PRO BLUE provides deep section cure capability, extremely fast hardness development and long library life to rubber. 收起 | |
| BLUESIL CATA HI PRO GREEN | Elkem Silicones | BLUESIL CATA HI-PRO GREEN is an organotin carboxylate with additives. It is the standard catalyst for most of the BLUESIL V-1060 and V-1080 series of moldmaking rubber compounds. BLUESIL CATA HI-PRO GREEN provides deep section cure capability, fast hardne...展開 BLUESIL CATA HI-PRO GREEN is an organotin carboxylate with additives. It is the standard catalyst for most of the BLUESIL V-1060 and V-1080 series of moldmaking rubber compounds. BLUESIL CATA HI-PRO GREEN provides deep section cure capability, fast hardness development and long library life to rubber. 收起 | |
| BLUESIL CATA PC THIXO | Elkem Silicones | BLUESIL CATA PC THIXO is a tin salt based activator for Silicon RTV. After addition of 5% of catalyst PC Thixo, the siliconic system –BASE + CATALYST PC becomes more and more elastic, losing its plastic behaviour, and thixotropic. | |
| BLUESIL EMUL 1601 | Elkem Silicones | BLUESIL EMUL 1601 is a general purpose, non-ionic oil in water silicone emulsion of a medium viscosity non-reactive dimethyl polysiloxane. BLUESIL EMUL 1601 may be used alone or as an additive at low levels in other emulsion systems to achieve specific p...展開 BLUESIL EMUL 1601 is a general purpose, non-ionic oil in water silicone emulsion of a medium viscosity non-reactive dimethyl polysiloxane. BLUESIL EMUL 1601 may be used alone or as an additive at low levels in other emulsion systems to achieve specific performance or processing characteristics. 收起 | |
| BLUESIL EMUL 1610 | Elkem Silicones | BLUESIL EMUL 1610 is a general purpose, non-ionic oil in water silicone emulsion of a high viscosity non-reactive dimethyl polysiloxane. BLUESIL EMUL 1610 may be used alone or as an additive at low levels in other emulsion systems to achieve specific per...展開 BLUESIL EMUL 1610 is a general purpose, non-ionic oil in water silicone emulsion of a high viscosity non-reactive dimethyl polysiloxane. BLUESIL EMUL 1610 may be used alone or as an additive at low levels in other emulsion systems to achieve specific performance or processing characteristics. 收起 | |
| BLUESIL EMUL 872RH | Elkem Silicones | BLUESIL EMUL 872RH is a general purpose, non-ionic, aqueous silicone emulsion. | |
| BLUESIL FLD 1658 | Elkem Silicones | BLUESIL FLD 1658 is a methylalkylpolysiloxane which has outstanding lubricating properties and presents a good compatibility with many products other than silicones. | |
| BLUESIL GP-25 | Elkem Silicones | BLUESIL GP 25 is a general purpose, 25DSA, two component, tin catalyzed, room temperature curing silicone elastomer. It is designed as a medium viscosity, medium strength elastomer with good cured rubber properties, long library life and accurate detail r...展開 BLUESIL GP 25 is a general purpose, 25DSA, two component, tin catalyzed, room temperature curing silicone elastomer. It is designed as a medium viscosity, medium strength elastomer with good cured rubber properties, long library life and accurate detail reproduction. 收起 | |
| BLUESIL HI PRO CLEAR | Elkem Silicones | BLUESIL CATA HI-PRO CLEAR is an organotin carboxylate with additives. It is a clear catalyst for most of theBLUESIL V-1060 andV-1080 series of moldmaking rubber compounds.BLUESIL CATA HI-PRO CLEAR provides deep section cure capability, fast hardness devel...展開 BLUESIL CATA HI-PRO CLEAR is an organotin carboxylate with additives. It is a clear catalyst for most of theBLUESIL V-1060 andV-1080 series of moldmaking rubber compounds.BLUESIL CATA HI-PRO CLEAR provides deep section cure capability, fast hardness development and long library life to rubber. 收起 | |
| BLUESIL PC RTRD | Elkem Silicones | BLUESIL PC RTRD is an additive designed to increase the time required to obtain the final properties of condensation curing RTV-2. | |
| BLUESIL PI 2074 | Elkem Silicones | BLUESIL PI 2074 is a cationic photoinitiator for use with epoxy resins, vinyl ethers or any other type of oligomer which polymerises cationically. It is also suited to the formulation of hybrid radical / cationic systems. | |
| BLUESIL PT ACC | Elkem Silicones | BLUESIL PT ACC is an accelerator for platinum cure, polyaddition silicone moldmaking compounds. It can be used with many of Bluestar Silicones addition cure products to customize the de-mold time to as short as 2 hours, allowing multiple molds to be made ...展開 BLUESIL PT ACC is an accelerator for platinum cure, polyaddition silicone moldmaking compounds. It can be used with many of Bluestar Silicones addition cure products to customize the de-mold time to as short as 2 hours, allowing multiple molds to be made each day per master. This can be done without adversely affecting the physical properties of the elastomer. 收起 | |
| BLUESIL RT FOAM 3240 A | Elkem Silicones | BLUESIL RT FOAM 3240 A&B is a two-component silicone foam which cures at room temperature by an addition cure reaction. When the A and B liquid components are thoroughly mixed in 1:1 ratio, the product will expand and cure to a foamed elastomer at room te...展開 BLUESIL RT FOAM 3240 A&B is a two-component silicone foam which cures at room temperature by an addition cure reaction. When the A and B liquid components are thoroughly mixed in 1:1 ratio, the product will expand and cure to a foamed elastomer at room temperature. 收起 | |
| BLUESIL RT FOAM 3241 A | Elkem Silicones | BLUESIL RT FOAM 3241 A&B is a two-component silicone foam which cures at room temperature by an addition cure reaction. When the A and B liquid components are thoroughly mixed in a 1:1 ratio, the product expands and cures to a foamed elastomer at room tem...展開 BLUESIL RT FOAM 3241 A&B is a two-component silicone foam which cures at room temperature by an addition cure reaction. When the A and B liquid components are thoroughly mixed in a 1:1 ratio, the product expands and cures to a foamed elastomer at room temperature. 收起 | |
| BLUESIL RTRD PA 40 | Elkem Silicones | BLUESIL RTRD PA 40 is an additive that increases the reaction time of those RTV-2 silicone elastomers that cure by a polyaddition reaction. Both the working time (i.e. the time until the product can be processed, also called pot-life or open-time) and the...展開 BLUESIL RTRD PA 40 is an additive that increases the reaction time of those RTV-2 silicone elastomers that cure by a polyaddition reaction. Both the working time (i.e. the time until the product can be processed, also called pot-life or open-time) and the tack-free time (i.e. the time to achieve the final elastomeric properties, also called setting or curing time) will be prolonged by the addition of BLUESIL RTRD PA 40. 收起 | |
| BLUESIL RTV 1556 A | Elkem Silicones | BLUESIL RTV 1556 is a two component, high strength, addition cure, room temperature or heat vulcanized silicone rubber compound. Designed specifically for moldmaking and resin infusion vacuum bag applications, it offers low viscosity, high tear cut resist...展開 BLUESIL RTV 1556 is a two component, high strength, addition cure, room temperature or heat vulcanized silicone rubber compound. Designed specifically for moldmaking and resin infusion vacuum bag applications, it offers low viscosity, high tear cut resistance, and easy release for long lasting molds. BLUESIL RTV 1556 has high temperature and chemical resistance with excellent flexibility, low shrinkage, and excellent detail reproduction which makes it well suited for production and prototyping use with all types of casting resins. 收起 | |
| BLUESIL RTV 1556 FC B | Elkem Silicones | BLUESIL RTV 1556 is a two component, high strength, addition cure, room temperature or heat vulcanized silicone rubber compound. Designed specifically for moldmaking and resin infusion vacuum bag applications, it offers low viscosity, high tear cut resist...展開 BLUESIL RTV 1556 is a two component, high strength, addition cure, room temperature or heat vulcanized silicone rubber compound. Designed specifically for moldmaking and resin infusion vacuum bag applications, it offers low viscosity, high tear cut resistance, and easy release for long lasting molds. BLUESIL RTV 1556 has high temperature and chemical resistance with excellent flexibility, low shrinkage, and excellent detail reproduction which makes it well suited for production and prototyping use with all types of casting resins. 收起 | |
| BLUESIL RTV 1597 A | Elkem Silicones | BLUESIL RTV 1597 is a two component, medium hardness, high strength, addition cure, room temperature or heat curing silicone elastomer. Designed specifically for moldmaking applications, it offers low viscosity, high tear and cut resistance, and easy rele...展開 BLUESIL RTV 1597 is a two component, medium hardness, high strength, addition cure, room temperature or heat curing silicone elastomer. Designed specifically for moldmaking applications, it offers low viscosity, high tear and cut resistance, and easy release for long lasting molds. BLUESIL RTV 1597 has high temperature and chemical resistance with excellent flexibility, low shrinkage, and well-defined detail reproduction, making it ideal for prototyping applications. 收起 | |
| BLUESIL RTV 3040 A | Elkem Silicones | BLUESIL RTV 3040 A is a two component silicone elastomer which is available in 5 versions with different features. It crosslinks at room temperature by polyaddition reaction. The polymerisation can be accelerated by heat (max. 150°C). The silicone compone...展開 BLUESIL RTV 3040 A is a two component silicone elastomer which is available in 5 versions with different features. It crosslinks at room temperature by polyaddition reaction. The polymerisation can be accelerated by heat (max. 150°C). The silicone components are delivered as two viscous liquids, which once mixed and cured, transform into a transparent, elastic and resistant material. Polymerisation occurs without production of heat. 收起 | |
| BLUESIL RTV 3040 B | Elkem Silicones | BLUESIL RTV 3040 B is a two component silicone elastomer which is available in 5 versions with different features. It crosslinks at room temperature by polyaddition reaction. The polymerisation can be accelerated by heat (max. 150°C). The silicone compone...展開 BLUESIL RTV 3040 B is a two component silicone elastomer which is available in 5 versions with different features. It crosslinks at room temperature by polyaddition reaction. The polymerisation can be accelerated by heat (max. 150°C). The silicone components are delivered as two viscous liquids, which once mixed and cured, transform into a transparent, elastic and resistant material. Polymerisation occurs without production of heat. 收起 | |
| BLUESIL RTV 3040 HARD A 1/1 | Elkem Silicones | BLUESIL RTV 3040 HARD A 1/1 is a two component silicone elastomer which is available in 5 versions with different features. It crosslinks at room temperature by polyaddition reaction. The polymerisation can be accelerated by heat (max. 150°C). The silicon...展開 BLUESIL RTV 3040 HARD A 1/1 is a two component silicone elastomer which is available in 5 versions with different features. It crosslinks at room temperature by polyaddition reaction. The polymerisation can be accelerated by heat (max. 150°C). The silicone components are delivered as two viscous liquids, which once mixed and cured, transform into a transparent, elastic and resistant material. Polymerisation occurs without production of heat. 收起 | |
| BLUESIL RTV 3040 HARD B | Elkem Silicones | BLUESIL RTV 3040 HARD B is a two component silicone elastomer which is available in 5 versions with different features. It crosslinks at room temperature by polyaddition reaction. The polymerisation can be accelerated by heat (max. 150°C). The silicone co...展開 BLUESIL RTV 3040 HARD B is a two component silicone elastomer which is available in 5 versions with different features. It crosslinks at room temperature by polyaddition reaction. The polymerisation can be accelerated by heat (max. 150°C). The silicone components are delivered as two viscous liquids, which once mixed and cured, transform into a transparent, elastic and resistant material. Polymerisation occurs without production of heat. 收起 | |
| BLUESIL RTV 3040 LV B | Elkem Silicones | BLUESIL RTV 3040 LV B is a two component silicone elastomer which is available in 5 versions with different features. It crosslinks at room temperature by polyaddition reaction. The polymerisation can be accelerated by heat (max. 150°C). The silicone comp...展開 BLUESIL RTV 3040 LV B is a two component silicone elastomer which is available in 5 versions with different features. It crosslinks at room temperature by polyaddition reaction. The polymerisation can be accelerated by heat (max. 150°C). The silicone components are delivered as two viscous liquids, which once mixed and cured, transform into a transparent, elastic and resistant material. Polymerisation occurs without production of heat. 收起 | |
| BLUESIL RTV 3040 QC A | Elkem Silicones | BLUESIL RTV 3040 QC A is a two component silicone elastomer which is available in 5 versions with different features. It crosslinks at room temperature by polyaddition reaction. The polymerisation can be accelerated by heat (max. 150°C). The silicone comp...展開 BLUESIL RTV 3040 QC A is a two component silicone elastomer which is available in 5 versions with different features. It crosslinks at room temperature by polyaddition reaction. The polymerisation can be accelerated by heat (max. 150°C). The silicone components are delivered as two viscous liquids, which once mixed and cured, transform into a transparent, elastic and resistant material. Polymerisation occurs without production of heat. 收起 | |
| BLUESIL RTV 3040 QC B | Elkem Silicones | BLUESIL RTV 3040 QC B is a two component silicone elastomer which is available in 5 versions with different features. It crosslinks at room temperature by polyaddition reaction. The polymerisation can be accelerated by heat (max. 150°C). The silicone comp...展開 BLUESIL RTV 3040 QC B is a two component silicone elastomer which is available in 5 versions with different features. It crosslinks at room temperature by polyaddition reaction. The polymerisation can be accelerated by heat (max. 150°C). The silicone components are delivered as two viscous liquids, which once mixed and cured, transform into a transparent, elastic and resistant material. Polymerisation occurs without production of heat. 收起 | |
| BLUESIL RTV 3040 SB B | Elkem Silicones | BLUESIL RTV 3040 SB B is a two component silicone elastomer which is available in 5 versions with different features. It crosslinks at room temperature by polyaddition reaction. The polymerisation can be accelerated by heat (max. 150°C). The silicone comp...展開 BLUESIL RTV 3040 SB B is a two component silicone elastomer which is available in 5 versions with different features. It crosslinks at room temperature by polyaddition reaction. The polymerisation can be accelerated by heat (max. 150°C). The silicone components are delivered as two viscous liquids, which once mixed and cured, transform into a transparent, elastic and resistant material. Polymerisation occurs without production of heat. 收起 | |
| BLUESIL RTV 3120 A | Elkem Silicones | BLUESIL RTV 3120 A is a two component silicone elastomer which cures at room temperature by a polyaddition reaction. This reaction can be accelerated by heat. | |
| BLUESIL RTV 3122 | Elkem Silicones | BLUESIL RTV 3122 + 2% Catalyst 68 is a silicone elastomer with two components, crosslinking at room temperature by a polycondensation reaction. | |
| BLUESIL RTV 3130 A | Elkem Silicones | BLUESIL RTV 3130 A&B, RTV 3131 A&B, RTV 3131 A&B SC and RTV 3132 A&B are two component silicone elastomers which cure at room temperature by a polyaddition reaction. This reaction can be accelerated by heat. | |
| BLUESIL RTV 3220 LV | Elkem Silicones | BLUESIL RTV 3220 LV is a silicone elastomer which cures at room temperature by a polycondensation reaction. After the addition of catalyst BLUESIL CATA 2H, it cures at room temperature and leads to flexible and elastic material. | |
| BLUESIL RTV 3221 | Elkem Silicones | BLUESIL RTV 3221 is a silicone elastomer which, after the addition of catalyst, cures at room temperature and leads to flexible and elastic material. | |
| BLUESIL RTV 3223 | Elkem Silicones | BLUESIL RTV 3223 is a two-component silicone elastomer which, after the addition of CATA 2H, cures at room temperature and leads to flexible and elastic material. |
