UL Prospector

成功!

成功保存搜索結果
Request Sample ADDID® 900 Evonik Resource Efficiency GmbH, TEGO Products 赢创工业集团-迪高涂料助剂 二氨基官能三甲氧基硅烷增粘劑。
Request Sample AEROSIL® R 7200 Evonik Resource Efficiency GmbH, TEGO Products 赢创工业集团-迪高涂料助剂 一種氣相二氧化硅, 以Aerosil® 200 為基礎用甲基丙烯酸硅烷做后處理。 用於塑料和彈性體的油漆和涂料。
Request Sample ALBIDUR® 1223 Evonik Resource Efficiency GmbH, TEGO Products 赢创工业集团-迪高涂料助剂 ALBIDUR® 1223 is a reactive resin modifier. It offers high flexibility, excellent adhesion, chemical and solvent resistance, and good long-term persistence. This product is recommended for formulations with very low VOC-content.
Request Sample ALBIDUR® EP 2240 A Evonik Resource Efficiency GmbH, TEGO Products 赢创工业集团-迪高涂料助剂 ALBIDUR®EP 2240 A是一種白色液體,活性樹脂改性劑。本產品可用於底漆,填料和面漆,用於溶劑型和無溶劑型雙組分環氧配方。它與芳族環氧樹脂具有高相容性,並增加了耐撕裂性和耐沖擊性。它良好的保存了網密度和耐化學品性。 ALBIDUR®EP 2240 A可降低固化收縮率,提高了汙垢脫落能力,並對水和稀酸具有阻隔性能。
Request Sample ALBIDUR® PU 5640 Evonik Resource Efficiency GmbH, TEGO Products 赢创工业集团-迪高涂料助剂 ALBIFLEX® 348是一種黃色不透明的液體,雙酚A環氧矽嵌段共聚物。該活性樹脂改性劑用於底漆/填料和面漆,用於溶劑型和無溶劑型雙組分和熱固化環氧樹脂配方。該產品不會降低透明度,具有出色的柔韌性。它也增加了附著力和極好的耐水性。ALBIFLEX® 348良好的保存了網密度,不改變機械性能,對芳香族環氧樹脂具有良好的相容性。
Aromatic Urethane Hexaacrylate SM6329 Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 SM6329 is an aromatic urethane hexaacrylate. It offers high reactivity and hardness, and provides abrasion and chemical resistance. SM6329 is widely used in UV coatings, adhesives and inks.
Bisphenol A Epoxy Diacrylate SM6104 Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 SM6104 is a standard bisphenol A epoxy diacrylate. It provides low viscosity and light color, and offers high gloss, hardness and excellent chemical resistance. This product is widely used in UV coatings, inks and adhesives, and more.
CAC (2-Ethoxyethyl Acetate) Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 CAC (2-Ethoxyethyl Acetate) is a colorless, water-soluble liquid. It is miscibile with general organic solvents. This product is mainly used for metal, furniture paint solvents, brush paint solvent, also can be used as solvent of protective coating, dye, ...展開 CAC (2-Ethoxyethyl Acetate) is a colorless, water-soluble liquid. It is miscibile with general organic solvents. This product is mainly used for metal, furniture paint solvents, brush paint solvent, also can be used as solvent of protective coating, dye, resin, leather, printing ink. 收起
Request Sample COLOROL F Evonik Resource Efficiency GmbH, TEGO Products 赢创工业集团-迪高涂料助剂 用於溶劑型體系的潤濕和分散添加劑。
Cyclic Trimethylopropane Formal Acrylate (CTFA) Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 CTFA is a mono-functional UV monomer. It offers high reactivity, flexibility, low shrinkage, and good adhesion. This monomer is widely used in UV or EB cured coatings, adhesives and inks.
DBE (Dibasic Esters) Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 DBE is a mixed dibasic acid ester with a high boiling point. It is a kind of low toxicity, low odor, biodegradable and environmentally friendly solvent. This product is widely used in paints, coatings, printing inks, and other fields.
DPM (Dipropylene Glycol Methyl Ether) Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 DPM is a top grade solvent used in water-based coatings. It has low toxicity, low viscosity, low surface tension, good evaporation rate, good dissolving ability, and good coupling ability. This product is widely used in paints, coatings, and printing inks...展開 DPM is a top grade solvent used in water-based coatings. It has low toxicity, low viscosity, low surface tension, good evaporation rate, good dissolving ability, and good coupling ability. This product is widely used in paints, coatings, and printing inks. 收起
Epoxy Resin SM828 Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 SM828 is an undiluted, clear difunctional bisphenol A/epichlorohydrin derived liquid epoxy resin. It is a widely-used, general purpose liquid epoxy resin. This product is recognized as the standard from which many variations have been developed. It is rec...展開 SM828 is an undiluted, clear difunctional bisphenol A/epichlorohydrin derived liquid epoxy resin. It is a widely-used, general purpose liquid epoxy resin. This product is recognized as the standard from which many variations have been developed. It is recommended for adhesives, marine and protective coatings, can and coil coatings, automotive coatings, and more. 收起
Request Sample Lipotin® A Evonik Resource Efficiency GmbH, TEGO Products 赢创工业集团-迪高涂料助剂 用於水性體系的潤濕和分散添加劑。
Request Sample Lipotin® DB Evonik Resource Efficiency GmbH, TEGO Products 赢创工业集团-迪高涂料助剂 用於溶劑型體系的潤濕和分散添加劑。
Request Sample NANOCRYL® C 130 Evonik Resource Efficiency GmbH, TEGO Products 赢创工业集团-迪高涂料助剂 NANOCRYL® C130是一種透明至微黃色液體,50%重量比,於環叁羥甲基丙烷縮甲醛丙烯酸酯中的二氧化矽納米顆粒。它可用於溶劑型和非溶劑型輻射固化配方中。它具有良好的柔韌性,可用於套印清漆和塑料面漆。該產品可增強耐劃傷和耐磨性,而不減少透明度。它具有對鋁/玻璃極好的附著力,降低固化收縮率和阻隔作用。它也對塑料有附著力,對填充劑配方有抗沉降效果和改進的汙垢脫落性能
Request Sample NANOCRYL® C 140 Evonik Resource Efficiency GmbH, TEGO Products 赢创工业集团-迪高涂料助剂 NANOCRYL® C140是一種透明至微黃色液體,二氧化矽納米顆粒50%重量比,混於己二醇二丙烯酸酯中。它具有良好的抗紫外線,高柔韌性,可用於溶劑型和無溶劑型輻射固化配方。它也適用於套印清漆和塑料面漆。本品具有增強的耐劃傷和耐磨損性,不會降低透明度。它對鋁/玻璃具有良好的附著力,可降低固化收縮率,以及具有阻隔效果。它還改善了汙垢脫落性。
Request Sample NANOCRYL® C 150 Evonik Resource Efficiency GmbH, TEGO Products 赢创工业集团-迪高涂料助剂 NANOCRYL®C 150是一種透明至微黃色液體,二氧化矽納米顆粒50%重量比,混於叁羥甲基丙烷(TMPTA)中。它可用於溶劑型和無溶劑型輻射固化配方。它具有高表面硬度和高交聯密度,可用於套印清漆和塑料面漆。本品具有增強的耐劃傷和耐磨損性,不會降低透明度。它對鋁/玻璃具有良好的附著力,可降低固化收縮率,以及具有阻隔效果。它還改善了汙垢脫落性和對塑料的附著力。
Request Sample NANOCRYL® C 165 Evonik Resource Efficiency GmbH, TEGO Products 赢创工业集团-迪高涂料助剂 NANOCRYL® C 165是一種透明至微黃色液體,二氧化矽納米顆粒50%重量比,混於丙氧基化季戊四醇叁丙烯酸酯(PPTTA)中。它可用於溶劑型和無溶劑型輻射固化配方。塗膜具有非常高的交聯密度,可用於木器塗料。本品具有出色的耐劃傷和耐磨損性,不會降低透明度。它對鋁/玻璃具有極好的附著力,可降低固化收縮率,以及具有阻隔效果。它還改善了汙垢脫落性和對塑料的附著力。
Propylene Glycol Monomethyl Ether (PM) Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 Propylene Glycol Monomethyl Ether (PM) is a solvent for nitrocellulose, alkyd resins, and anhydride-modified phenolic resins. It is also used as an additive for antifreeze and brake fluid. This product has excellent dissolving performance, and has appropr...展開 Propylene Glycol Monomethyl Ether (PM) is a solvent for nitrocellulose, alkyd resins, and anhydride-modified phenolic resins. It is also used as an additive for antifreeze and brake fluid. This product has excellent dissolving performance, and has appropriate volatility and reactivity characteristics for a wide range of applications. 收起
Propylene Glycol Monomethyl Ether Acetate (PMA) Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 Propylene Glycol Monomethyl Ether Acetate (PMA) is a senior solvent. Because of its molecular structure, it is able to dissolve both polar and non-polar substance. This product is highly recommended for coatings and printing inks, and is also suitable for...展開 Propylene Glycol Monomethyl Ether Acetate (PMA) is a senior solvent. Because of its molecular structure, it is able to dissolve both polar and non-polar substance. This product is highly recommended for coatings and printing inks, and is also suitable for unsaturated polyester, epoxy resins, polyurethane resins, and acrylic resins. 收起
Request Sample Rewopol® SB DO 75 Evonik Resource Efficiency GmbH, TEGO Products 赢创工业集团-迪高涂料助剂 REWOPOL® SB DO 75是一種不含有機矽的透明磺基琥珀酸二異辛鈉液體溶液,用於水性配方。該產品非常有效,可改善各種基材和顏料的潤濕性,並可出色的降低靜態和動態表面張力,用於柔版、凹版和水性印刷油墨和罩印清漆。
Request Sample SILIKOFTAL® HTF Evonik Resource Efficiency GmbH, TEGO Products 赢创工业集团-迪高涂料助剂 SILIKOFTAL® HTF MPA/MBA是一個透明至微濁的液體,可用酯類,酮類和乙二醇醚稀釋。它具有低熱塑性、高彈性、良好的附著力,不添加含有機錫的化合物。這些屬性不會受其混濁的影響。該產品可與PTFE組合,用於不粘塗料。它也可以用在炊具、家用電器以及電和煤氣爐裝飾塗料,可永久耐熱220℃。
Request Sample SILIKOFTAL® HTL Evonik Resource Efficiency GmbH, TEGO Products 赢创工业集团-迪高涂料助剂 用於生產耐熱裝飾涂料的溶劑型主體樹脂。
Request Sample SILIKOFTAL® HTL 2 Evonik Resource Efficiency GmbH, TEGO Products 赢创工业集团-迪高涂料助剂 用於生產耐熱裝飾涂料的溶劑型主體樹脂。
Request Sample SILIKOFTAL® HTL 3 Evonik Resource Efficiency GmbH, TEGO Products 赢创工业集团-迪高涂料助剂 用於生產耐熱裝飾涂料的溶劑型主體樹脂。
Request Sample SILIKOFTAL® HTT Evonik Resource Efficiency GmbH, TEGO Products 赢创工业集团-迪高涂料助剂 用於生產耐熱裝飾涂料的溶劑型主體樹脂。
Request Sample SILIKOFTAL® non-stick 60 Evonik Resource Efficiency GmbH, TEGO Products 赢创工业集团-迪高涂料助剂 用於生產離型涂料的溶劑型主體樹脂。
Request Sample SILIKOPHEN® AC 1000 Evonik Resource Efficiency GmbH, TEGO Products 赢创工业集团-迪高涂料助剂 SILIKOPHEN® AC 1000 is a low viscosity, solvent free methoxy-functional silicone resin. It offers curing at ambient temperature by catalysis and entering of humidity via a hydrolysis/condensation reaction. This product is suitable for anti-corrosion coati...展開 SILIKOPHEN® AC 1000 is a low viscosity, solvent free methoxy-functional silicone resin. It offers curing at ambient temperature by catalysis and entering of humidity via a hydrolysis/condensation reaction. This product is suitable for anti-corrosion coatings, depending on the formulation. SILIKOPHEN® AC 1000 is recommended for high temperature applications for industrial facilities, power plants, incinerating plants, ventilators, turbines, silencers, ovens, chimneys, oven inserts, barbeques, and electric and gas heaters. 收起
Request Sample SILIKOPHEN® AC 900 Evonik Resource Efficiency GmbH, TEGO Products 赢创工业集团-迪高涂料助剂 SILIKOPHEN® AC 900 is a low viscosity methoxy-functional methyl phenylsilicone resin. It cures at ambient temperature by catalysis and entering of humidity via a hydrolysis/condensation reaction. It also features low smoke and odor development of the comp...展開 SILIKOPHEN® AC 900 is a low viscosity methoxy-functional methyl phenylsilicone resin. It cures at ambient temperature by catalysis and entering of humidity via a hydrolysis/condensation reaction. It also features low smoke and odor development of the completely cured coating at temperature load. This product is suitable for anti-corrosion coatings for high temperature applications for industrial facilities, power plants, incinerating plants, ventilators, turbines, silencers, ovens, chimneys, oven inserts, barbeques, and electric and gas heaters. 收起
Request Sample SILIKOPHEN® P 40/W Evonik Resource Efficiency GmbH, TEGO Products 赢创工业集团-迪高涂料助剂 用於耐熱、抗腐蝕油漆的水性主體樹脂。
Request Sample SILIKOPHEN® P 50/X Evonik Resource Efficiency GmbH, TEGO Products 赢创工业集团-迪高涂料助剂 用於耐熱抗腐蝕油漆的溶劑型主體樹脂。
Request Sample SILIKOPHEN® P 80/X Evonik Resource Efficiency GmbH, TEGO Products 赢创工业集团-迪高涂料助剂 用於耐熱抗腐蝕油漆的溶劑型主體樹脂。
Request Sample SILIKOPON® EC Evonik Resource Efficiency GmbH, TEGO Products 赢创工业集团-迪高涂料助剂 SILIKOPON® EC是一個透明至混濁的液體,矽酮環氧樹脂,可由酯、酮和乙二醇醚稀釋。它是熱穩定的,具有出色的附著力,以及耐腐蝕性,耐化學品和耐溶劑性。本產品適用於高溫、防腐蝕塗料,用於消聲器、烤箱、煙囪、爐插管、燒烤爐、電和煤氣爐。它適用於消聲器塗料,特別是摩托車。
Request Sample SILIKOPON® ED Evonik Resource Efficiency GmbH, TEGO Products 赢创工业集团-迪高涂料助剂 SILIKOPON® ED is a silicone epoxy resin with good chemical resistance and excellent corrosion resistance. It is suitable for ultra high solids coatings. Applications include industrial and anti-corrosion coatings, offshore/marine areas, structural steel,...展開 SILIKOPON® ED is a silicone epoxy resin with good chemical resistance and excellent corrosion resistance. It is suitable for ultra high solids coatings. Applications include industrial and anti-corrosion coatings, offshore/marine areas, structural steel, rail car and tank construction, concrete walls and floors, and commercial transport coatings. 收起
Request Sample SILIKOPON® EF Evonik Resource Efficiency GmbH, TEGO Products 赢创工业集团-迪高涂料助剂 SILIKOPON® EF is a silicone-epoxy resin for high temperature resistant corrosion protection coatings. It is a stoving resin and is distinguished by good adhesion and resistance to solvents. It can be used on concrete walls and floors and for roof tile, pi...展開 SILIKOPON® EF is a silicone-epoxy resin for high temperature resistant corrosion protection coatings. It is a stoving resin and is distinguished by good adhesion and resistance to solvents. It can be used on concrete walls and floors and for roof tile, pipe lining, and commercial transport coatings. Some special features of SILIKOPON® EF includes extraordinary gloss retention and weather resistance, an anti-graffiti effect, excellent corrosion resistance, and is suitable for ultra high solids coatings. 收起
Request Sample SILIKOTOP® E 900 Evonik Resource Efficiency GmbH, TEGO Products 赢创工业集团-迪高涂料助剂 SILIKOTOP® E 900 is a branched hydroxyfunctional high-solid silicone-polyester. It is recommended for formulations with very low VOC content, < 250 g/L. It has a low processing viscosity at a very low solvent demand. It also has excellent stone-chipping a...展開 SILIKOTOP® E 900 is a branched hydroxyfunctional high-solid silicone-polyester. It is recommended for formulations with very low VOC content, < 250 g/L. It has a low processing viscosity at a very low solvent demand. It also has excellent stone-chipping and impact resistance, excellent appearance, and good pigment affinity, chemical resistance, and weather resistance. 收起
Request Sample SILIKOTOP® E 901 Evonik Resource Efficiency GmbH, TEGO Products 赢创工业集团-迪高涂料助剂 SILIKOTOP® E 901 is a branched hydroxyfunctional high-solid silicone-polyester. It is recommended for formulations with very low VOC content, < 250 g/L. It has a low processing viscosity at a very low solvent demand. It also has excellent stone-chipping a...展開 SILIKOTOP® E 901 is a branched hydroxyfunctional high-solid silicone-polyester. It is recommended for formulations with very low VOC content, < 250 g/L. It has a low processing viscosity at a very low solvent demand. It also has excellent stone-chipping and impact resistance, excellent appearance, and good pigment affinity, chemical resistance, and weather resistance. 收起
Speedcure 2-ITX Lambson Group Ltd. Speedcure 2-ITX is a cream to pale yellow powder and a photoinitiator which, when used with tertiary amine synergists, induces a rapid photo-polymerisation of suitable resin formulations. This product can be applied to wood varnishes, printing inks as wel...展開 Speedcure 2-ITX is a cream to pale yellow powder and a photoinitiator which, when used with tertiary amine synergists, induces a rapid photo-polymerisation of suitable resin formulations. This product can be applied to wood varnishes, printing inks as well as decorative coatings for metal cans and food cartons. 收起
Speedcure 500 Lambson Group Ltd. Speedcure 500 is a eutectic liquid mixture of a type one and a type two photoinitiator. It is used to initiate the photo-polymerisation of chemically unsaturated pre-polymers, in combination with mono- and multifunctional monomers. This colourless to slig...展開 Speedcure 500 is a eutectic liquid mixture of a type one and a type two photoinitiator. It is used to initiate the photo-polymerisation of chemically unsaturated pre-polymers, in combination with mono- and multifunctional monomers. This colourless to slightly yellow liquid enables surface and depth cure as well as lower viscosity formulations for clear coatings, wood lacquers and printing inks. 收起
Speedcure 5040 Lambson Group Ltd. Speedcure 5040 is a benzophenone/thioxanthone free mixture of free radical photoinitiators developed in response to technical requirements in graphic arts, electronics and industrial coatings industries. This transparent yellow to red/brown liquid is used...展開 Speedcure 5040 is a benzophenone/thioxanthone free mixture of free radical photoinitiators developed in response to technical requirements in graphic arts, electronics and industrial coatings industries. This transparent yellow to red/brown liquid is used in applications where low odor and high performance are required or when curing is tougher in pigmented systems for improved wetting. It is applied to UV Flexo, offset and screen inks. 收起
Speedcure 5070 Lambson Group Ltd. Speedcure 5070 is a low migration formulated photoinitiator created for food packaging related applications of UV flexographic, offset and screen printing inks where low migration as a main characteristic is mandatory, but can be used in applications wher...展開 Speedcure 5070 is a low migration formulated photoinitiator created for food packaging related applications of UV flexographic, offset and screen printing inks where low migration as a main characteristic is mandatory, but can be used in applications where low odour and migration are necessary in troublesome cure colours like black. This transparent yellow to amber liquid can be applied to UV Flexo, offset, screen and UV printing inks. 收起
Speedcure 7005 Lambson Group Ltd. Speedcure 7005 is a polymeric photoinitiator suitable for use when benzophenone free formulations are necessary. This will induce rapid photo-polymerisation when formulated with a suitable polymeric tertiary amine synergist, such as Speedcure 7040. It com...展開 Speedcure 7005 is a polymeric photoinitiator suitable for use when benzophenone free formulations are necessary. This will induce rapid photo-polymerisation when formulated with a suitable polymeric tertiary amine synergist, such as Speedcure 7040. It comes as an off white to pale yellow liquid with low migration, odour and toxicity used in printing inks, wood lacquers, over print varnishes, putties and fillers for particle and chip boards, adhesives and solder masks. 收起
Speedcure 7010 Lambson Group Ltd. Speedcure 7010 is a highly efficient polymeric thioxanthone type photoinitiator which when used with a polymeric tertiary amine synergist such as Speedcure 7040 or an acrylated amine, induces the rapid photo-polymerisation of suitable resin formulations. ...展開 Speedcure 7010 is a highly efficient polymeric thioxanthone type photoinitiator which when used with a polymeric tertiary amine synergist such as Speedcure 7040 or an acrylated amine, induces the rapid photo-polymerisation of suitable resin formulations. This cream to pale yellow free flowing powder inhibits low migration and yellowing in addition to adding depth cure in pigmented in thick films. It can be applied to printing inks, wood coatings and decorative coatings for metal cans and food cartons. 收起
Speedcure 7010-L Lambson Group Ltd. Speedcure 7010L is a polymeric thioxanthone type photoinitiator which when used with a polymeric tertiary amine synergist such as Speedcure 7040 or an acrylated amine, induces the rapid photo-polymerisation of suitable resin formulations. This pale yellow...展開 Speedcure 7010L is a polymeric thioxanthone type photoinitiator which when used with a polymeric tertiary amine synergist such as Speedcure 7040 or an acrylated amine, induces the rapid photo-polymerisation of suitable resin formulations. This pale yellow liquid inhibits low migration and yellowing in addition to providing depth cure in pigmented and thick films. It is applied to printing inks, wood coatings and decorative coatings for metal cans and food cartons. 收起
Speedcure 7040 Lambson Group Ltd. Speedcure 7040 is an amine synergist which, when used with Type II polymeric photoinitiators, generates free radicals that initiate photo-polymerisation of suitable resin formulations. This pale amber liquid contains low migration, toxicity and odour in a...展開 Speedcure 7040 is an amine synergist which, when used with Type II polymeric photoinitiators, generates free radicals that initiate photo-polymerisation of suitable resin formulations. This pale amber liquid contains low migration, toxicity and odour in addition to solubility in most common organic solvents and UV curable monomers. It can be applied to wood varnishes, printing inks, over printing varnishes, decorative coatings for metal cans and food cartons, adhesives, sealants and metal primers. 收起
Speedcure 73 Lambson Group Ltd. Speedcure 73 is a Type I photoinitiator. Radicals are formed by an α cleavage mechanism and as such does not require an amine synergist to promote radical production. This clear colourless to yellowish liquid produces hard coatings with high gloss and pro...展開 Speedcure 73 is a Type I photoinitiator. Radicals are formed by an α cleavage mechanism and as such does not require an amine synergist to promote radical production. This clear colourless to yellowish liquid produces hard coatings with high gloss and provides good surface cure with low yellowing. It can be applied to clear coatings, overprint varnishes, wood laquers, silicone based coatings and printing inks. 收起
Speedcure 84 Lambson Group Ltd. Speedcure 84 is a Type I photoinitiator. Radicals are formed by an α cleavage mechanism and as such does not require an amine synergist to promote radical production. This white crystalline powder produces hard coatings with high gloss and provides good s...展開 Speedcure 84 is a Type I photoinitiator. Radicals are formed by an α cleavage mechanism and as such does not require an amine synergist to promote radical production. This white crystalline powder produces hard coatings with high gloss and provides good surface core with low yellowing. It is applied to clear coatings, overprint varnishes, wood lacquers, adhesives, silicone based coatings and printing inks. 收起
Speedcure 97 Lambson Group Ltd. Speedcure 97 is a Type I photoinitiator used to initiate UV photo-polymerisation typically with unsaturated monomers and polymers such as acrylates/methacrylates or vinyl polymers. This white powder increases cure speed, provide surface core and good reac...展開 Speedcure 97 is a Type I photoinitiator used to initiate UV photo-polymerisation typically with unsaturated monomers and polymers such as acrylates/methacrylates or vinyl polymers. This white powder increases cure speed, provide surface core and good reactivity. It is applied to clear coatings, overprint varnishes, wood lacquers, adhesives, silicone based coatings and printing inks. 收起
Speedcure 976 Lambson Group Ltd. Speedcure 976 is a cationic photoinitiator and a mixture of triarylsulphonium hexafluoroantimonate salts in propylene carbonate. This yellow liquid enables a fast cure in inks and overprint varnishes. It is also more geared for thicker coatings and films.
Speedcure 976D Lambson Group Ltd. Speedcure 976D is a cationic photoinitiator and a mixture of triarylsulphonium hexafluoroantimonate salts in a reactive solvent. This pale yellow transparent liquid enables a fast cure in inks and overprint varnishes and is suitable for clear and thicker ...展開 Speedcure 976D is a cationic photoinitiator and a mixture of triarylsulphonium hexafluoroantimonate salts in a reactive solvent. This pale yellow transparent liquid enables a fast cure in inks and overprint varnishes and is suitable for clear and thicker coatings greater than 25μm. 收起
Speedcure BDMB Lambson Group Ltd. Speedcure BDMB is a reactive Type I photoinitiator that will induce rapid photo-polymerisation when exposed to UV light. This fine pale yellow powder can be used as a through cure in dark colour pigmented systems and will cure complex systems with other c...展開 Speedcure BDMB is a reactive Type I photoinitiator that will induce rapid photo-polymerisation when exposed to UV light. This fine pale yellow powder can be used as a through cure in dark colour pigmented systems and will cure complex systems with other co-initiators. It is applied to UV curable screen printing inks, varnishes for paper metal and plastics, photresists and solder maks, UV curable off-set printing inks, printing plates and adhesives. 收起
Speedcure BEDB Lambson Group Ltd. Speedcure BEDB is a liquid amine synergist which, when used with Type II photoinitiators, generates free radicals capable of initiating the rapid photo-polymerisation of suitable resin formulations. Thioxanthone photoinitiators are highly soluble in Speed...展開 Speedcure BEDB is a liquid amine synergist which, when used with Type II photoinitiators, generates free radicals capable of initiating the rapid photo-polymerisation of suitable resin formulations. Thioxanthone photoinitiators are highly soluble in Speedcure BEDB, affording a single liquid additive. This clear, pale yellow liquid has good soluble properties, low toxicity and low odor. It is used in wood varnishes, printing inks, over print varnishes, decorative coatings for metal cans and food cartons, adhesives, sealants and metal primers. 收起
Speedcure BEM Lambson Group Ltd. Speedcure BEM is a liquid, non-yellowing photoinitiator which, with tertiary amine synergists, initiates rapid polymerisation of suitable resin formulations. This clear light yellow oily liquid is a eutectic mixture of benzophenone and methylbenzophenones...展開 Speedcure BEM is a liquid, non-yellowing photoinitiator which, with tertiary amine synergists, initiates rapid polymerisation of suitable resin formulations. This clear light yellow oily liquid is a eutectic mixture of benzophenone and methylbenzophenones that helps reduce viscosity of formulations, contains solubility and compatibility with unsaturated monomers and does not contribute to photo yellowing. It is applied to printing inks, clear overprint varnishes, wood varnishes, decorative coatings for metal cans and food cartons as well as adhesives. 收起
Speedcure BKL Lambson Group Ltd. Speedcure BKL is a Type I photoinitiator that forms radicals rapidly by an α cleavage mechanism that initiates the photo-polymerisation of suitable resin formulations. This white crystalline powder is compatible with most pre-polymers, resins and monomers...展開 Speedcure BKL is a Type I photoinitiator that forms radicals rapidly by an α cleavage mechanism that initiates the photo-polymerisation of suitable resin formulations. This white crystalline powder is compatible with most pre-polymers, resins and monomers used in UV curing industry and is a general purpose photoinitiator for inks and coatings. It can be applied to printing inks, over print varnishes, wood lacquers, adhesives as well as putties and fillers for particle and chip boards. 收起
Speedcure BMS Lambson Group Ltd. Speedcure BMS is a Type II photoinitiator that can induce the rapid photo-polymerisation when formulated with a suitable tertiary amine synergist. This white powder, when used in combination with other substances, can initiate polymerisation of pigmented ...展開 Speedcure BMS is a Type II photoinitiator that can induce the rapid photo-polymerisation when formulated with a suitable tertiary amine synergist. This white powder, when used in combination with other substances, can initiate polymerisation of pigmented systems and can form a single liquid additive with a liquid amine synergist comprising both initiator and synergist. It also has low yellowing and can be used in printing inks, clear over print varnishes and adhesives as well as decorative coatings for metal cans and food cartons. 收起
Speedcure BP Lambson Group Ltd. Speedcure BP is a Type II photoinitiator that, when used with tertiary amine synergists, initiates the rapid photo-polymerisation of suitable resin formulations. These white flakes are commonly used to achieve a fast surface cure and help oxygen inhibitio...展開 Speedcure BP is a Type II photoinitiator that, when used with tertiary amine synergists, initiates the rapid photo-polymerisation of suitable resin formulations. These white flakes are commonly used to achieve a fast surface cure and help oxygen inhibition in printing inks, clear over print varnishes, wood varnishes, decorative coatings for metal cans and cartons as well as adhesives. 收起
Speedcure CPTX Lambson Group Ltd. Speedcure CPTX is a thioxanthone photoinitiator which, when used with tertiary amine synergists, induces the rapid photo-polymerisation of suitable resin formulations and can also be used with Speedcure 73 to sensitise iodonium salts in cationic cure. Thi...展開 Speedcure CPTX is a thioxanthone photoinitiator which, when used with tertiary amine synergists, induces the rapid photo-polymerisation of suitable resin formulations and can also be used with Speedcure 73 to sensitise iodonium salts in cationic cure. This yellow crystalline powder contains fast cure speed, excellent depth cure and high final degree of cure suitable for pigmented and thick films. It can be applied to printing inks, wood varnishes, adhesives as well as decorative coatings for metal cans and food cartons. 收起
Speedcure DETX Lambson Group Ltd. Speedcure DETX is a photoinitiator which, when used with tertiary amine synergists, induces the rapid photo-polymerisation of suitable resin formulations. This yellow powder can provide surface cure of various films, improve ink quality and reduce prepara...展開 Speedcure DETX is a photoinitiator which, when used with tertiary amine synergists, induces the rapid photo-polymerisation of suitable resin formulations. This yellow powder can provide surface cure of various films, improve ink quality and reduce preparation time in printing inks, wood varnishes, decorative coatings for metal cans and food cartons as well as adhesives. 收起
Speedcure DMB Lambson Group Ltd. Speedcure DMB is an amine synergist that, when used with Type II photoinitiators, generates free radicals that initiate photo-polymerisation of suitable resin formulations. This pale yellow liquid contains low volatiliy and freezing point in addition to l...展開 Speedcure DMB is an amine synergist that, when used with Type II photoinitiators, generates free radicals that initiate photo-polymerisation of suitable resin formulations. This pale yellow liquid contains low volatiliy and freezing point in addition to little photo-yellowing. It is applied to printing inks, wood varnishes, decorative coatings for metal cans and food cartons, adhesives and metal primers. 收起
Speedcure EAQ Lambson Group Ltd. Speedcure EAQ is a Type II photoinitiator that absorbs in the UV spectrum at 330 nm. In the presence of a hydrogen donor, highly reactive donor radicals are formed, which are capable of initiating the polymerisation process efficiently. This pale yellow ...展開 Speedcure EAQ is a Type II photoinitiator that absorbs in the UV spectrum at 330 nm. In the presence of a hydrogen donor, highly reactive donor radicals are formed, which are capable of initiating the polymerisation process efficiently. This pale yellow powder cures without an amine-type hydrogen donor and has its effectiveness raised by the presence of oxygen. It is used in curing resists and printing inks that are acid treated post-cure. 收起
Speedcure EDB Lambson Group Ltd. Speedcure EDB is an amine synergist which, when used with Type II photoinitiators, generates free radicals that initiate photo-polymerisation of suitable resin formulations. This off white to white powder is used in wood varnishes, printing inks, over pri...展開 Speedcure EDB is an amine synergist which, when used with Type II photoinitiators, generates free radicals that initiate photo-polymerisation of suitable resin formulations. This off white to white powder is used in wood varnishes, printing inks, over printing varnishes, decorative coatings for metal cans and food cartons, adhesives, sealants and metal primers. 收起
Speedcure EHA Lambson Group Ltd. Speedcure EHA is an amine synergist which, when used with Type II photoinitiators, generates free radicals that initiate the photo-polymerisation of suitable resin formulations. This pale yellow liquid contains a low freezing point and volatility in addit...展開 Speedcure EHA is an amine synergist which, when used with Type II photoinitiators, generates free radicals that initiate the photo-polymerisation of suitable resin formulations. This pale yellow liquid contains a low freezing point and volatility in addition to acting as a useful solvent in UV formulations. It can be applied to wood varnishes, printing inks, adhesives and decorative coatings for metal cans and food cartons. 收起
Speedcure EMK Lambson Group Ltd. Speedcure EMK is an efficient UV photoinitiator or hydrogen donor absorbing at 377 nm and used primarily in the electronics sector. This pale yellow solid enables a fast cure in cure resists and printing inks.
Speedcure EPD Lambson Group Ltd. Speedcure EPD is a highly efficient amine synergist which, when used with Type II photoinitiators, generates free radicals that initiate photo-polymerisation of suitable resin formulations. This white to off white powder has low toxicity and odour in addi...展開 Speedcure EPD is a highly efficient amine synergist which, when used with Type II photoinitiators, generates free radicals that initiate photo-polymerisation of suitable resin formulations. This white to off white powder has low toxicity and odour in addition to solubility in most common organic solvents and UV curable monomers. It is applied to wood varnishes, printing inks, decorative coatings for metal cans and food cartons, adhesives, sealants and metal primers. 收起
Speedcure ITX Lambson Group Ltd. Speedcure ITX is a pale yellow powder and a photoinitiator which, when used with tertiary amine synergists, induces a rapid photo-polymerisation of suitable resin formulations. This product can be applied to wood varnishes, printing inks as well as decora...展開 Speedcure ITX is a pale yellow powder and a photoinitiator which, when used with tertiary amine synergists, induces a rapid photo-polymerisation of suitable resin formulations. This product can be applied to wood varnishes, printing inks as well as decorative coatings for metal cans and food cartons. 收起
Speedcure MBB Lambson Group Ltd. Speedcure MBB is a near odourless photoinitiator which, when used with tertiary amine synergists, initiates the rapid polymerisation of suitable resin formulations. This white to off white crystalline powder does not effect photo yellowing, promotes rapid...展開 Speedcure MBB is a near odourless photoinitiator which, when used with tertiary amine synergists, initiates the rapid polymerisation of suitable resin formulations. This white to off white crystalline powder does not effect photo yellowing, promotes rapid surface cure and ideal for food packing printing inks due to its minimal odor. It can be used in printing inks, decorative coatings for metal cans and food cartons as well as clear over print and wood varnishes. 收起
Speedcure MBF Lambson Group Ltd. Speedcure MBF is a photoinitiator that is commonly used for overprint varnish and wood coating applications where excellent surface cure response and non-yellowing are desired. This clear, pale yellow liquid is recommended for systems requiring low odor a...展開 Speedcure MBF is a photoinitiator that is commonly used for overprint varnish and wood coating applications where excellent surface cure response and non-yellowing are desired. This clear, pale yellow liquid is recommended for systems requiring low odor and enables a surface cure as well as increased cross-link density. In addition to wood coating and overprint varnish, it can be applied to inks, industrial coatings and adhesives. 收起
Speedcure MBP Lambson Group Ltd. Speedcure MBP is a cost effective photoinitiator used when benzophenone free formulations are required. It is a free-flowing, easy-to-handle, low-dusting, white crystalline small-flaked material that contains the same curing efficiency and performance cha...展開 Speedcure MBP is a cost effective photoinitiator used when benzophenone free formulations are required. It is a free-flowing, easy-to-handle, low-dusting, white crystalline small-flaked material that contains the same curing efficiency and performance characteristics as benzophenone. It can be applied to printing inks, wood lacquers, over print varnishes, putties and fillers for particle and chips boards, adhesives and solder masks. 收起
Speedcure PBZ Lambson Group Ltd. Speedcure PBZ is a photoinitiator, normally used with a tertiary amine synergist in the formulation of UV curable coatings. This off white powder absorbs at longer wavelengths than benzophenone which enables a faster cure. It can be applied to printing in...展開 Speedcure PBZ is a photoinitiator, normally used with a tertiary amine synergist in the formulation of UV curable coatings. This off white powder absorbs at longer wavelengths than benzophenone which enables a faster cure. It can be applied to printing inks, wood varnishes, over print varnishes, decorative coatings for metal cans and food cartons, adhesives and metal primers. 收起
Speedcure TPO Lambson Group Ltd. Speedcure TPO is a Type I homolytic photoinitiator, which absorbs UV light at longer wavelengths, making it suitable for curing pigmented formulations. This pale yellow crystalline powder undergoes "photo-bleaching" to make it effective for curing thick f...展開 Speedcure TPO is a Type I homolytic photoinitiator, which absorbs UV light at longer wavelengths, making it suitable for curing pigmented formulations. This pale yellow crystalline powder undergoes "photo-bleaching" to make it effective for curing thick films. It is applied to wood coatings and filler, glass fibre reinforced polyester laminates, manufacture of printing plates and pigmented printing inks. 收起
Speedcure TPO-L Lambson Group Ltd. Speedcure TPO-L is a liquid Type I photoinitiator that absorbs at 380 nm. The photo-fragmentation produces benzoyl and phosphinyl radicals that can initiate the polymerisation of formulations containing acrylates, unsaturated polyesters and styrene. This ...展開 Speedcure TPO-L is a liquid Type I photoinitiator that absorbs at 380 nm. The photo-fragmentation produces benzoyl and phosphinyl radicals that can initiate the polymerisation of formulations containing acrylates, unsaturated polyesters and styrene. This yellow liquid cures coating containing titanium dioxide, is a safer cure for opaque systems and gives a good through-cure. It is applied to UV offset and flexo inks, white pigmented UV lacquers, UV screen inks, UV overprint varnishes and printing plates. 收起
Speedcure XFe Lambson Group Ltd. Speedcure XFe is a liquid photoinitiator developed for the rapid radiation curing of thick layers typically used in photo-resists and printing inks; it is used primarily in the electronics industry. A transparent pale yellow liquid, it exhibits little odo...展開 Speedcure XFe is a liquid photoinitiator developed for the rapid radiation curing of thick layers typically used in photo-resists and printing inks; it is used primarily in the electronics industry. A transparent pale yellow liquid, it exhibits little odour and volatility while maintaining high cure speed. 收起
Speedcure XFs Lambson Group Ltd. Speedcure XFs is a liquid photoinitiator specifically developed for use in clear coatings such as varnishes and lacquers for wood, paper, metals and plastics. It is also used in the formulation of adhesives and printing inks. A transparent pale yellow liq...展開 Speedcure XFs is a liquid photoinitiator specifically developed for use in clear coatings such as varnishes and lacquers for wood, paper, metals and plastics. It is also used in the formulation of adhesives and printing inks. A transparent pale yellow liquid, it has little odour while exhibiting non-yellowing post curing and efficient surface core. 收起
Speedcure XFw Lambson Group Ltd. Speedcure XFw is a transparent pale yellow liquid liquid Type I photoinitiator for use in white inks and coatings. It is a high performance, easy to handle liquid system that provides high reactivity, efficient through cure, low yellowing and good solubil...展開 Speedcure XFw is a transparent pale yellow liquid liquid Type I photoinitiator for use in white inks and coatings. It is a high performance, easy to handle liquid system that provides high reactivity, efficient through cure, low yellowing and good solubility in many ink and resin systems. The product can be used for all UV flexo, screen and off-set inks; white pigmented UV lacquers and other white pigmented systems while exhibiting little odour and non-yellowing post curing. 收起
Speedcure XKm Lambson Group Ltd. Speedcure XKm is a hybrid photoinitiator that can used as a type I initiator for clear and white pigmented systems or can also be used with an amine synergist or acrylated amine in order to improve the speed of surface cure. A white to off white powder, i...展開 Speedcure XKm is a hybrid photoinitiator that can used as a type I initiator for clear and white pigmented systems or can also be used with an amine synergist or acrylated amine in order to improve the speed of surface cure. A white to off white powder, it exhibits little yellowing, volatility and odour while curing white pigmented coatings, clear coatings and pigmented printing inks. 收起
Request Sample TEGOMER® E-SI 2330 Evonik Resource Efficiency GmbH, TEGO Products 赢创工业集团-迪高涂料助剂 樹脂基礎原料。
Request Sample TEGO® AddBond 1270 Evonik Resource Efficiency GmbH, TEGO Products 赢创工业集团-迪高涂料助剂 用於溶劑基配方的樹脂,可增強與金屬表面的附著力並提高涂層抗腐蝕性。
Request Sample TEGO® AddBond 2220 ND Evonik Resource Efficiency GmbH, TEGO Products 赢创工业集团-迪高涂料助剂 用於溶劑基工業涂料的粘性樹脂。
Request Sample TEGO® AddBond 2325 Evonik Resource Efficiency GmbH, TEGO Products 赢创工业集团-迪高涂料助剂 用於溶劑基配方的樹脂,可增強與金屬表面的附著力,改善防腐性並和多種原料,尤其是聚丙烯酸酯有非常好的配伍性。
Request Sample TEGO® AddBond DS 1300 Evonik Resource Efficiency GmbH, TEGO Products 赢创工业集团-迪高涂料助剂 改性特殊聚酯樹脂的水性分散液, 用於改善水性配方體系在金屬和塑料表面的附著力。
Request Sample TEGO® AddBond HS Evonik Resource Efficiency GmbH, TEGO Products 赢创工业集团-迪高涂料助剂 TEGO® AddBond HS is a liquid solution of a modified special polyester in n-butyl acetate for solventbourne formulations. This product is highly suitable for high solids coatings formulations, and it shows excellent adhesion improvement on aluminum, steel,...展開 TEGO® AddBond HS is a liquid solution of a modified special polyester in n-butyl acetate for solventbourne formulations. This product is highly suitable for high solids coatings formulations, and it shows excellent adhesion improvement on aluminum, steel, and galvanized steel as well as on plastics. It has an excellent fixation of aluminum pigments, great flexibility, and viscosity reduction/increase of solids content. TEGO® AddBond HS improves the intercoat adhesion and the corrosion protection in industrial coatings, silk screen inks, and architectural coatings applications. 收起
Request Sample TEGO® AddBond LTH Evonik Resource Efficiency GmbH, TEGO Products 赢创工业集团-迪高涂料助剂 改性聚酯樹脂,可改善涂層間和在鋁、鋼表面的附著力,增進防腐性和硬度。
Request Sample TEGO® AddBond LTW Evonik Resource Efficiency GmbH, TEGO Products 赢创工业集团-迪高涂料助剂 用於溶劑基配方的樹脂,可大幅度增強與鋁表面、鋼表面及塑料表面的附著力。
Request Sample TEGO® AddBond LTW-B Evonik Resource Efficiency GmbH, TEGO Products 赢创工业集团-迪高涂料助剂 特殊改性聚酯樹脂,用於溶劑基配方,用於改善在金屬和塑料表面的附著力以及涂層間的附著力,增強防腐性。
Request Sample TEGO® Airex 900 Evonik Resource Efficiency GmbH, TEGO Products 赢创工业集团-迪高涂料助剂 溶劑型、無溶劑型和輻射固化型涂料的脫氣劑。
Request Sample TEGO® Airex 901 W Evonik Resource Efficiency GmbH, TEGO Products 赢创工业集团-迪高涂料助剂 水性涂料的脫氣劑。
Request Sample TEGO® Airex 902 W Evonik Resource Efficiency GmbH, TEGO Products 赢创工业集团-迪高涂料助剂 水性涂料的脫氣劑。
Request Sample TEGO® Airex 904 W Evonik Resource Efficiency GmbH, TEGO Products 赢创工业集团-迪高涂料助剂 TEGO® AIREX 904 W是一種聚醚矽氧烷共聚物,含有氣相二氧化矽。本產品是一種有效的脫氣濃縮物,可消除微泡。 TEGO® AIREX 904 W具有相容性和有效性的良好平衡。它非常適合無氣噴塗應用。它也適用於壓縮空氣噴塗和刷塗/輥塗應用。由於低溫引起的混濁是可逆的,並且不會影響TEGO® AIREX 904 W的性能
Request Sample TEGO® Airex 910 Evonik Resource Efficiency GmbH, TEGO Products 赢创工业集团-迪高涂料助剂 無溶劑型和溶劑型涂料的脫氣劑。
Request Sample TEGO® Airex 920 Evonik Resource Efficiency GmbH, TEGO Products 赢创工业集团-迪高涂料助剂 輻射固化涂料的脫氣劑。
Request Sample TEGO® Airex 921 Evonik Resource Efficiency GmbH, TEGO Products 赢创工业集团-迪高涂料助剂 TEGO® AIREX 921是一種液體不含有機矽的有機聚合物,通用於透明、有色,尤其是自由基固化配方。它也非常適合於壓縮空氣噴塗柔版/凹版印刷。可以在研磨或調漆過程中加入本產品。它可在溫度高於15℃時使用
Request Sample TEGO® Airex 922 Evonik Resource Efficiency GmbH, TEGO Products 赢创工业集团-迪高涂料助剂 TEGO®AIREX922 - 世界上最好的用於EP地坪塗料的不含有機矽無溶劑的脫泡劑。
Request Sample TEGO® Airex 931 Evonik Resource Efficiency GmbH, TEGO Products 赢创工业集团-迪高涂料助剂 溶劑型涂料的脫氣劑。
Request Sample TEGO® Airex 940 Evonik Resource Efficiency GmbH, TEGO Products 赢创工业集团-迪高涂料助剂 溶劑型和無溶劑型涂料的脫氣劑。
Request Sample TEGO® Airex 944 Evonik Resource Efficiency GmbH, TEGO Products 赢创工业集团-迪高涂料助剂 用於不含溶劑或溶劑基的地板和木器涂料配方的消泡劑。 對大小氣泡都有抑制作用,非常高效。
Request Sample TEGO® Airex 950 Evonik Resource Efficiency GmbH, TEGO Products 赢创工业集团-迪高涂料助剂 溶劑型涂料的脫氣劑。
Request Sample TEGO® Airex 990 Evonik Resource Efficiency GmbH, TEGO Products 赢创工业集团-迪高涂料助剂 TEGO® Airex 990 is a deaerator for solventborne coating formulations. It is used for industrial coatings, wood and furniture coatings, coatings for plastics, and leather top coats. TEGO® Airex 990 is highly suitable for high solids coatings formulations a...展開 TEGO® Airex 990 is a deaerator for solventborne coating formulations. It is used for industrial coatings, wood and furniture coatings, coatings for plastics, and leather top coats. TEGO® Airex 990 is highly suitable for high solids coatings formulations as well as for solventborne and solvent-free formulations. It helps prevent pinholes and popping, is highly compatible, has good recoatability, and is highly suitable for clears. It is also suitable for alkyd and UV systems. 收起
Request Sample TEGO® Airex 991 Evonik Resource Efficiency GmbH, TEGO Products 赢创工业集团-迪高涂料助剂 TEGO® Airex 991 deaerator for solvent-free and solventborne coating formulation based on deaerating organic polymers, with tip of silicone. It is recommended for industrial coatings and 2-pack coatings based on epoxies and polyurethanes. TEGO® Airex 991 h...展開 TEGO® Airex 991 deaerator for solvent-free and solventborne coating formulation based on deaerating organic polymers, with tip of silicone. It is recommended for industrial coatings and 2-pack coatings based on epoxies and polyurethanes. TEGO® Airex 991 has good recoatability, is highly effective, prevents micro- and macro-foam, and is used particularly for pigmented formulations. 收起
Request Sample TEGO® Dispers 610 Evonik Resource Efficiency GmbH, TEGO Products 赢创工业集团-迪高涂料助剂 用於溶劑型涂料的潤濕和分散添加劑。