| Aromatic Urethane Hexaacrylate SM6329 | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | SM6329 is an aromatic urethane hexaacrylate. It offers high reactivity and hardness, and provides abrasion and chemical resistance. SM6329 is widely used in UV coatings, adhesives and inks. | |
| BEPD 70L | Perstorp | BEPD 70L has two primary hydroxyl groups and is a mixture of 70% BEPD, 25% NEO, and 5% water. It is a clear and colorless liquid at room temperature. BEPD 70L can be used in saturated polyesters for can and coil coatings, high-solid coatings, and powder c...展開 BEPD 70L has two primary hydroxyl groups and is a mixture of 70% BEPD, 25% NEO, and 5% water. It is a clear and colorless liquid at room temperature. BEPD 70L can be used in saturated polyesters for can and coil coatings, high-solid coatings, and powder coatings. 收起 | |
| Bisphenol A Epoxy Diacrylate SM6104 | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | SM6104 is a standard bisphenol A epoxy diacrylate. It provides low viscosity and light color, and offers high gloss, hardness and excellent chemical resistance. This product is widely used in UV coatings, inks and adhesives, and more. | |
| Cyclic Trimethylopropane Formal Acrylate (CTFA) | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | CTFA is a mono-functional UV monomer. It offers high reactivity, flexibility, low shrinkage, and good adhesion. This monomer is widely used in UV or EB cured coatings, adhesives and inks. | |
| Epoxy Resin SM828 | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | SM828 is an undiluted, clear difunctional bisphenol A/epichlorohydrin derived liquid epoxy resin. It is a widely-used, general purpose liquid epoxy resin. This product is recognized as the standard from which many variations have been developed. It is rec...展開 SM828 is an undiluted, clear difunctional bisphenol A/epichlorohydrin derived liquid epoxy resin. It is a widely-used, general purpose liquid epoxy resin. This product is recognized as the standard from which many variations have been developed. It is recommended for adhesives, marine and protective coatings, can and coil coatings, automotive coatings, and more. 收起 | |
| MTD100 | Guangxi Zhongchang Resin Co., Ltd. | MTD100 is a light yellow flaky solid and a terpene-phenolic resin obtained by catalytic polymerization of turpentine or α-pinene with phenol. This product is used to improve extension and flexibility of adhesive through greater heat-resistance, tackifying...展開 MTD100 is a light yellow flaky solid and a terpene-phenolic resin obtained by catalytic polymerization of turpentine or α-pinene with phenol. This product is used to improve extension and flexibility of adhesive through greater heat-resistance, tackifying and a softening point between 90-100ºC. It can also be applied to coating and printing ink. 收起 | |
| MTD100W | Guangxi Zhongchang Resin Co., Ltd. | MTD100W is a light yellow flaky solid and a terpene-phenolic resin obtained by catalytic polymerization of turpentine or α-pinene with phenol. This product is used to improve extension and flexibility of adhesive through greater heat-resistance, tackifyin...展開 MTD100W is a light yellow flaky solid and a terpene-phenolic resin obtained by catalytic polymerization of turpentine or α-pinene with phenol. This product is used to improve extension and flexibility of adhesive through greater heat-resistance, tackifying and a softening point between 90-100ºC. It can also be applied to coating and printing ink. 收起 | |
| MTD120 | Guangxi Zhongchang Resin Co., Ltd. | MTD120 is a light yellow flaky solid and a terpene-phenolic resin obtained by catalytic polymerization of turpentine or α-pinene with phenol. This product is used to improve extension and flexibility of adhesive through greater heat-resistance, tackifying...展開 MTD120 is a light yellow flaky solid and a terpene-phenolic resin obtained by catalytic polymerization of turpentine or α-pinene with phenol. This product is used to improve extension and flexibility of adhesive through greater heat-resistance, tackifying and a softening point between 120-130ºC. It can also be applied to coating and printing ink. 收起 | |
| MTD120W | Guangxi Zhongchang Resin Co., Ltd. | MTD120W is a light yellow flaky solid and a terpene-phenolic resin obtained by catalytic polymerization of turpentine or α-pinene with phenol. This product is used to improve extension and flexibility of adhesive through greater heat-resistance, tackifyin...展開 MTD120W is a light yellow flaky solid and a terpene-phenolic resin obtained by catalytic polymerization of turpentine or α-pinene with phenol. This product is used to improve extension and flexibility of adhesive through greater heat-resistance, tackifying and a softening point between 120-130ºC. It can also be applied to coating and printing ink. 收起 | |
| MTD150 | Guangxi Zhongchang Resin Co., Ltd. | MTD150 is a light yellow flaky solid and a terpene-phenolic resin obtained by catalytic polymerization of turpentine or α-pinene with phenol. This product is used to improve extension and flexibility of adhesive through greater heat-resistance, tackifying...展開 MTD150 is a light yellow flaky solid and a terpene-phenolic resin obtained by catalytic polymerization of turpentine or α-pinene with phenol. This product is used to improve extension and flexibility of adhesive through greater heat-resistance, tackifying and a softening point between 145-160ºC. It can also be applied to coating and printing ink. 收起 | |
| MTD150W | Guangxi Zhongchang Resin Co., Ltd. | MTD150W is a light yellow flaky solid and a terpene-phenolic resin obtained by catalytic polymerization of turpentine or α-pinene with phenol. This product is used to improve extension and flexibility of adhesive through greater heat-resistance, tackifyin...展開 MTD150W is a light yellow flaky solid and a terpene-phenolic resin obtained by catalytic polymerization of turpentine or α-pinene with phenol. This product is used to improve extension and flexibility of adhesive through greater heat-resistance, tackifying and a softening point between 145-160ºC. It can also be applied to coating and printing ink. 收起 | |
| Polyamide Resin TK 1014 | Hangzhou Tiankai (China) Enterprise Co., Ltd. | Polyamide Resin TK 1014 is a yellowish granule reacted from dimer acid and diamine that functions as a co-solvent polyamide resin. This product features high gloss, a low freezing point, solvent release, and folding endurance. It is water-fast, has a visc...展開 Polyamide Resin TK 1014 is a yellowish granule reacted from dimer acid and diamine that functions as a co-solvent polyamide resin. This product features high gloss, a low freezing point, solvent release, and folding endurance. It is water-fast, has a viscosity of 100-140 mpa.s at 25°C, and has a softening point of 105-118°C. Polyamide Resin TK 1014 finds application in gravure plastic printing inks, paper printing inks, and hot-melt adhesives. 收起 | |
| Polyamide Resin TK 1417 | Hangzhou Tiankai (China) Enterprise Co., Ltd. | Polyamide Resin TK 1417 is a yellowish granule reacted from dimer acid and diamine that functions as a co-solvent polyamide resin. This product features high gloss, a low freezing point, solvent release, and folding endurance. It is water-fast, has a visc...展開 Polyamide Resin TK 1417 is a yellowish granule reacted from dimer acid and diamine that functions as a co-solvent polyamide resin. This product features high gloss, a low freezing point, solvent release, and folding endurance. It is water-fast, has a viscosity of 140-170 mpa.s at 25°C, and has a softening point of 105-118°C. Polyamide Resin TK 1417 finds application in gravure plastic printing inks, paper printing inks, and hot-melt adhesives. 收起 | |
| Polyamide Resin TK 1720 | Hangzhou Tiankai (China) Enterprise Co., Ltd. | Polyamide Resin TK 1720 is a yellowish granule reacted from dimer acid and diamine that functions as a co-solvent polyamide resin. This product features high gloss, a low freezing point, solvent release, and folding endurance. It is water-fast, has a visc...展開 Polyamide Resin TK 1720 is a yellowish granule reacted from dimer acid and diamine that functions as a co-solvent polyamide resin. This product features high gloss, a low freezing point, solvent release, and folding endurance. It is water-fast, has a viscosity of 170-200 mpa.s at 25°C, and has a softening point of 105-118°C. Polyamide Resin TK 1720 finds application in gravure plastic printing inks, paper printing inks, and hot-melt adhesives. 收起 | |
| Polyamide Resin TK 2000 | Hangzhou Tiankai (China) Enterprise Co., Ltd. | Polyamide Resin TK 2000 is a yellowish granule reacted from dimer acid and diamine that functions as a co-solvent polyamide resin. This product features high gloss, a low freezing point, solvent release, and folding endurance. It is water-fast, has a visc...展開 Polyamide Resin TK 2000 is a yellowish granule reacted from dimer acid and diamine that functions as a co-solvent polyamide resin. This product features high gloss, a low freezing point, solvent release, and folding endurance. It is water-fast, has a viscosity of 120-170 mpa.s at 25°C, and has a softening point of 115-125°C. Polyamide Resin TK 2000 finds application in gravure plastic printing inks, paper printing inks, and hot-melt adhesives. 收起 | |
| Polyamide Resin TK 588B | Hangzhou Tiankai (China) Enterprise Co., Ltd. | Polyamide Resin TK 588B is a yellowish granule reacted from dimer acid and diamine that functions as a co-solvent polyamide resin. This product features high gloss, a low freezing point, solvent release, and folding endurance. It is water-fast, has a visc...展開 Polyamide Resin TK 588B is a yellowish granule reacted from dimer acid and diamine that functions as a co-solvent polyamide resin. This product features high gloss, a low freezing point, solvent release, and folding endurance. It is water-fast, has a viscosity of 100-180 mpa.s at 25°C, and has a softening point of 105-115°C. Polyamide Resin TK 588B finds application in gravure plastic printing inks, paper printing inks, and hot-melt adhesives. 收起 | |
| Polyamide Resin TK 588C | Hangzhou Tiankai (China) Enterprise Co., Ltd. | Polyamide Resin TK 588C is a yellowish granule reacted from dimer acid and diamine that functions as a co-solvent polyamide resin. This product features high gloss, a low freezing point, solvent release, and folding endurance. It is water-fast, has a visc...展開 Polyamide Resin TK 588C is a yellowish granule reacted from dimer acid and diamine that functions as a co-solvent polyamide resin. This product features high gloss, a low freezing point, solvent release, and folding endurance. It is water-fast, has a viscosity of 100-150 mpa.s at 25°C, and has a softening point of 100-180°C. Polyamide Resin TK 588C finds application in gravure plastic printing inks, paper printing inks, and hot-melt adhesives. 收起 | |
| Polyamide Resin TK 688B | Hangzhou Tiankai (China) Enterprise Co., Ltd. | Polyamide Resin TK 688B is a yellowish granule produced from reacted dimer acid and diamine that functions as a co-solvent polyamide resin. This product is compatible with nitrocotton, adheres to polyethylene material, and features high gloss, a low freez...展開 Polyamide Resin TK 688B is a yellowish granule produced from reacted dimer acid and diamine that functions as a co-solvent polyamide resin. This product is compatible with nitrocotton, adheres to polyethylene material, and features high gloss, a low freezing point, solvent release, and folding endurance. It is water-fast, has a viscosity of 110-180 mpa.s at 25°C, and has a softening point of 120-200°C. Polyamide Resin TK 688B finds application in gravure plastics, printing inks, paper printing inks, and hot-melt adhesives. 收起 | |
| Polyamide Resin TK 688C | Hangzhou Tiankai (China) Enterprise Co., Ltd. | Polyamide Resin TK 688C is a yellowish granule reacted from dimer acid and diamine that functions as a co-solvent polyamide resin. This product features high gloss, a low freezing point, solvent release, and folding endurance. It is water-fast, has a visc...展開 Polyamide Resin TK 688C is a yellowish granule reacted from dimer acid and diamine that functions as a co-solvent polyamide resin. This product features high gloss, a low freezing point, solvent release, and folding endurance. It is water-fast, has a viscosity of 100-150 mpa.s at 25°C, and has a softening point of 120-180°C. Polyamide Resin TK 688C finds application in gravure plastic printing inks, paper printing inks, and hot-melt adhesives. 收起 | |
| Polyamide Resin TK 7010 | Hangzhou Tiankai (China) Enterprise Co., Ltd. | Polyamide Resin TK 7010 is a yellowish granule reacted from dimer acid and diamine that functions as a co-solvent polyamide resin. This product features high gloss, a low freezing point, solvent release, and folding endurance. It is water-fast, has a visc...展開 Polyamide Resin TK 7010 is a yellowish granule reacted from dimer acid and diamine that functions as a co-solvent polyamide resin. This product features high gloss, a low freezing point, solvent release, and folding endurance. It is water-fast, has a viscosity of 70-100 mpa.s at 25°C, and has a softening point of 105-118°C. Polyamide Resin TK 7010 finds application in gravure plastic printing inks, paper printing inks, and hot-melt adhesives. 收起 | |
| RA100 | Guangxi Zhongchang Resin Co., Ltd. | RA100 is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesiv...展開 RA100 is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink, paints and electronic flux. It contains a softening point of less than or equal to 100ºC and an acid number less than or equal to 190 mgKOH/g. 收起 | |
| RA100W | Guangxi Zhongchang Resin Co., Ltd. | RA100W is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesi...展開 RA100W is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink, paints and electronic flux. It contains a softening point of less than or equal to 100ºC and an acid number less than or equal to 190 mgKOH/g. 收起 | |
| RA120 | Guangxi Zhongchang Resin Co., Ltd. | RA120 is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesiv...展開 RA120 is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink, paints and electronic flux. It contains a softening point of less than or equal to 120ºC and an acid number less than or equal to 210 mgKOH/g. 收起 | |
| RA120W | Guangxi Zhongchang Resin Co., Ltd. | RA120W is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesi...展開 RA120W is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink, paints and electronic flux. It contains a softening point of less than or equal to 120ºC and an acid number less than or equal to 210 mgKOH/g. 收起 | |
| RA140 | Guangxi Zhongchang Resin Co., Ltd. | RA140 is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesiv...展開 RA140 is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink, paints and electronic flux. It contains a softening point of less than or equal to 140ºC and an acid number less than or equal to 145 mgKOH/g. 收起 | |
| RA140W | Guangxi Zhongchang Resin Co., Ltd. | RA140W is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesi...展開 RA140W is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink, paints and electronic flux. It contains a softening point of less than or equal to 140ºC and an acid number less than or equal to 145 mgKOH/g. 收起 | |
| RA90 | Guangxi Zhongchang Resin Co., Ltd. | RA90 is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesive...展開 RA90 is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink, paints and electronic flux. It contains a softening point of less than or equal to 90ºC and an acid number less than or equal to 180 mgKOH/g. 收起 | |
| RA90W | Guangxi Zhongchang Resin Co., Ltd. | RA90W is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesiv...展開 RA90W is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink, paints and electronic flux. It contains a softening point of less than or equal to 90ºC and an acid number less than or equal to 180 mgKOH/g. 收起 | |
| RGM128 | Guangxi Zhongchang Resin Co., Ltd. | RGM128 is a light yellow flaky solid and a maleic modified glycerine ester of gum rosin created to provide aliphatic compatibility in ink or oil paint formulations. The solubility of this solid makes it a good coresin for adjusting solubility paremeters i...展開 RGM128 is a light yellow flaky solid and a maleic modified glycerine ester of gum rosin created to provide aliphatic compatibility in ink or oil paint formulations. The solubility of this solid makes it a good coresin for adjusting solubility paremeters in lithographic inks and varnishes in addition to pigment wetting for use in economical flushing varnishes for heatset and sheetfed flushes. It contains a softening point between 125-131ºC. 收起 | |
| RGM128W | Guangxi Zhongchang Resin Co., Ltd. | RGM128W is a light yellow flaky solid and a maleic modified glycerine ester of gum rosin created to provide aliphatic compatibility in ink or oil paint formulations. The solubility of this solid makes it a good coresin for adjusting solubility paremeters ...展開 RGM128W is a light yellow flaky solid and a maleic modified glycerine ester of gum rosin created to provide aliphatic compatibility in ink or oil paint formulations. The solubility of this solid makes it a good coresin for adjusting solubility paremeters in lithographic inks and varnishes in addition to pigment wetting for use in economical flushing varnishes for heatset and sheetfed flushes. It contains a softening point between 125-131ºC. 收起 | |
| RGM135 | Guangxi Zhongchang Resin Co., Ltd. | RGM135 is a light yellow flaky solid and a maleic modified glycerine ester of gum rosin created to provide aliphatic compatibility in ink or oil paint formulations. The solubility of this solid makes it a good coresin for adjusting solubility paremeters i...展開 RGM135 is a light yellow flaky solid and a maleic modified glycerine ester of gum rosin created to provide aliphatic compatibility in ink or oil paint formulations. The solubility of this solid makes it a good coresin for adjusting solubility paremeters in lithographic inks and varnishes in addition to pigment wetting for use in economical flushing varnishes for heatset and sheetfed flushes. It contains a softening point between 131-138ºC. 收起 | |
| RGM135W | Guangxi Zhongchang Resin Co., Ltd. | RGM135W is a light yellow flaky solid and a maleic modified glycerine ester of gum rosin created to provide aliphatic compatibility in ink or oil paint formulations. The solubility of this solid makes it a good coresin for adjusting solubility paremeters ...展開 RGM135W is a light yellow flaky solid and a maleic modified glycerine ester of gum rosin created to provide aliphatic compatibility in ink or oil paint formulations. The solubility of this solid makes it a good coresin for adjusting solubility paremeters in lithographic inks and varnishes in addition to pigment wetting for use in economical flushing varnishes for heatset and sheetfed flushes. It contains a softening point between 131-138ºC. 收起 | |
| Rosin Modified Phenolic Resin - 2112 | Guangxi Zhongchang Resin Co., Ltd. | Rosin Modified Phenolic Resin - 2112 is a product of esterification derived from glycerol (or pentaerythrite) with the polycondensate of rosin. This product has a softening point less than or equal to 135ºC and an acid number less than or equal to 20. It ...展開 Rosin Modified Phenolic Resin - 2112 is a product of esterification derived from glycerol (or pentaerythrite) with the polycondensate of rosin. This product has a softening point less than or equal to 135ºC and an acid number less than or equal to 20. It is soluble in hydrocarbon, aroma, ester, ketone, benzine, benzene, ethyl benzine, spirit and turpentine for use in paint, printing ink and adhesives. 收起 | |
| Rosin Modified Phenolic Resin - 2116 | Guangxi Zhongchang Resin Co., Ltd. | Rosin Modified Phenolic Resin - 2116 is a product of esterification derived from glycerol (or pentaerythrite) with the polycondensate of rosin. This product has a softening point less than 151ºC and an acid number less than or equal to 18. It is soluble i...展開 Rosin Modified Phenolic Resin - 2116 is a product of esterification derived from glycerol (or pentaerythrite) with the polycondensate of rosin. This product has a softening point less than 151ºC and an acid number less than or equal to 18. It is soluble in hydrocarbon, aroma, ester, ketone, benzine, benzene, ethyl benzine, spirit and turpentine for use in paint, printing ink and adhesives. 收起 | |
| Rosin Modified Phenolic Resin - 2118 | Guangxi Zhongchang Resin Co., Ltd. | Rosin Modified Phenolic Resin - 2118 is a product of esterification derived from glycerol (or pentaerythrite) with the polycondensate of rosin. This product has a softening point less than 157ºC and an acid number less than or equal to 20. It is soluble i...展開 Rosin Modified Phenolic Resin - 2118 is a product of esterification derived from glycerol (or pentaerythrite) with the polycondensate of rosin. This product has a softening point less than 157ºC and an acid number less than or equal to 20. It is soluble in hydrocarbon, aroma, ester, ketone, benzine, benzene, ethyl benzine, spirit and turpentine for use in paint, printing ink and adhesives. 收起 | |
| RPF100 | Guangxi Zhongchang Resin Co., Ltd. | RPF100 is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 97-103ºC, a gardner color of less than four and an acid number less than or equal to 20 mgKOH/g. It provides dissolvability in low ...展開 RPF100 is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 97-103ºC, a gardner color of less than four and an acid number less than or equal to 20 mgKOH/g. It provides dissolvability in low carbon alcohol, light color aging resistance and light resistance that is widely used in alcohol soluble and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink and electronic flux. 收起 | |
| RPF100A | Guangxi Zhongchang Resin Co., Ltd. | RPF100A is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 97-103ºC, a gardner color of less than four and an acid number less than or equal to 30 mgKOH/g. It provides dissolvability in low...展開 RPF100A is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 97-103ºC, a gardner color of less than four and an acid number less than or equal to 30 mgKOH/g. It provides dissolvability in low carbon alcohol, light color aging resistance and light resistance that is widely used in alcohol soluble and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink and electronic flux. 收起 | |
| RPF100B | Guangxi Zhongchang Resin Co., Ltd. | RPF100B is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 97-103ºC, a gardner color of less than five and an acid number less than or equal to 40 mgKOH/g. It provides dissolvability in low...展開 RPF100B is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 97-103ºC, a gardner color of less than five and an acid number less than or equal to 40 mgKOH/g. It provides dissolvability in low carbon alcohol, light color aging resistance and light resistance that is widely used in alcohol soluble and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink and electronic flux. 收起 | |
| RPF100W | Guangxi Zhongchang Resin Co., Ltd. | RPF100W is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 97-103ºC, a gardner color of less than one and an acid number less than or equal to 25 mgKOH/g. It provides dissolvability in low ...展開 RPF100W is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 97-103ºC, a gardner color of less than one and an acid number less than or equal to 25 mgKOH/g. It provides dissolvability in low carbon alcohol, light color aging resistance and light resistance that is widely used in alcohol soluble and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink and electronic flux. 收起 | |
| RPF90 | Guangxi Zhongchang Resin Co., Ltd. | RPF90 is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 87-93ºC, a gardner color of less than four and an acid number less than or equal to 20 mgKOH/g. It provides dissolvability in low ca...展開 RPF90 is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 87-93ºC, a gardner color of less than four and an acid number less than or equal to 20 mgKOH/g. It provides dissolvability in low carbon alcohol, light color aging resistance and light resistance that is widely used in alcohol soluble and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink and electronic flux. 收起 | |
| RPF90W | Guangxi Zhongchang Resin Co., Ltd. | RPF90W is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 87-93ºC, a gardner color of less than one and an acid number less than or equal to 25 mgKOH/g. It provides dissolvability in low ca...展開 RPF90W is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 87-93ºC, a gardner color of less than one and an acid number less than or equal to 25 mgKOH/g. It provides dissolvability in low carbon alcohol, light color aging resistance and light resistance that is widely used in alcohol soluble and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink and electronic flux. 收起 | |
| Sylomask | Fuji Silysia Chem. Ltd. | Sylomask is free-flow white powdered micronized silica for use in various types of paint systems. It has optimum average particle size and distribution for easy dispersion to any paint systems.Sylomask brings better results on remarkable anti-corrosive ef...展開 Sylomask is free-flow white powdered micronized silica for use in various types of paint systems. It has optimum average particle size and distribution for easy dispersion to any paint systems.Sylomask brings better results on remarkable anti-corrosive effects than conventional anti-corrosive pigments, and the effects last longer period. There are no physical alterations on a painted film surface, because of Sylomask functioning by ion exchange to show anti-corrosive effect. Sylomask is applied to paint, ink and topcoat systems. 收起 | |
| Sylophobic | Fuji Silysia Chem. Ltd. | Sylophobic demonstrates completely hydrophobic properties by way of chemically replacing the silanol groups on the silica surface with organic silicone compounds. Although Sylophobic is treated for hydrophobic properties on the silica surface, each grade ...展開 Sylophobic demonstrates completely hydrophobic properties by way of chemically replacing the silanol groups on the silica surface with organic silicone compounds. Although Sylophobic is treated for hydrophobic properties on the silica surface, each grade includes large surface area excellent dispersion and high oil absorptivity. Sylophobic is a product that is used in paint and anti-blocking in plastics. It is applicable in ink and paper for printing as well as adhesives. 收起 | |
| Sylosphere | Fuji Silysia Chem. Ltd. | Sylosphere is a fine powdered silica used as a matting agent in paints and an anti-blocking additive in plastics and has been used under the name of Sylysia for years. Furthermore, as in Sylysia, the adsorptive nature, viscosity, holding characteristics, ...展開 Sylosphere is a fine powdered silica used as a matting agent in paints and an anti-blocking additive in plastics and has been used under the name of Sylysia for years. Furthermore, as in Sylysia, the adsorptive nature, viscosity, holding characteristics, and dispersivity characteristics are also found in Sylosphere. Sylosphere is used in plastics, paper and ink, in paints, and in cosmetics and perfume. 收起 | |
| Sylysia | Fuji Silysia Chem. Ltd. | Sylysia is characterized by large internal surface area with a large number of pores, forming a three dimensional structure by the silicate. These properties are precisely controlled to meet a wide variety of applications. Sylysia has applications in resi...展開 Sylysia is characterized by large internal surface area with a large number of pores, forming a three dimensional structure by the silicate. These properties are precisely controlled to meet a wide variety of applications. Sylysia has applications in resin and water-based paints, inks, plastic films, pharmaceuticals & cosmetics, adhesives, as well as sensitized, electrostatic recording, and impact paper. 收起 | |
| TK-500 | Hangzhou Tiankai (China) Enterprise Co., Ltd. | TK-500 is a fine white powder consisting of calcium stearate that is insoluble in water. This product has a calcium content of 6.0-7.1% and a moisture content of 3%. It is commonly used in a wide variety of applications including paints and inks. | |
| TK-520 | Hangzhou Tiankai (China) Enterprise Co., Ltd. | TK-520 appears as white particles consisting of calcium stearate that is insoluble in water. This product has a calcium content of 6.0-7.1% and a moisture content of 3%. It is commonly used in a wide variety of applications including paints and inks. | |
| TKA-396 | Hangzhou Tiankai (China) Enterprise Co., Ltd. | TKA-396 is a solid alcohol soluble acrylic resin that is soluble in alcohol, ester, ketone, and aromatics at normal temperatures. This product features good gloss and abrasion resistance and is applied in inks and coatings that require a strict environmen...展開 TKA-396 is a solid alcohol soluble acrylic resin that is soluble in alcohol, ester, ketone, and aromatics at normal temperatures. This product features good gloss and abrasion resistance and is applied in inks and coatings that require a strict environment. It finds application in alcohol soluble inks, coatings, and adhesives. 收起 | |
| TKA-66 | Hangzhou Tiankai (China) Enterprise Co., Ltd. | TKA-66 is a solid thermoplastic acrylic resin that is soluble in ester, ketone, and aromatics. This product features good gloss hardness and pigment dispersion while providing good chemical and weather resistance. It is commonly used in a variety of appli...展開 TKA-66 is a solid thermoplastic acrylic resin that is soluble in ester, ketone, and aromatics. This product features good gloss hardness and pigment dispersion while providing good chemical and weather resistance. It is commonly used in a variety of applications including inks, plastic paints, and container paints. 收起 |
