| ACURE™ 500 | Allnex | ACURE™ 500 is the first generation of blocked catalyst used in ACURE™ systems. ACURE™ 500 consists of a strong base which is blocked with di-ethyl carbonate. ACURE™ 500 unblocks with the release of alcohol and CO2 and is the key enabler to the provision o...展開 ACURE™ 500 is the first generation of blocked catalyst used in ACURE™ systems. ACURE™ 500 consists of a strong base which is blocked with di-ethyl carbonate. ACURE™ 500 unblocks with the release of alcohol and CO2 and is the key enabler to the provision of fast dry times with long pot lives in ACURE™ coatings. The rate at which ACURE™ 500 unblocks may be controlled by the addition of an alcohol (typically ethanol, n-propanol, or n-butanol) to the ACURE™ coating. 收起 | Request Sample |
| ADDITOL® P 920 | Allnex | 催化劑母料，設計用於制造皺紋效果。在羥基聚酯基體中含有5％的活性物質。適合需要皺紋表面效果的應用 | Request Sample |
| ADDITOL® P 963 | Allnex | ADDITOL® P 963 is a catalyst masterbatch to be used in hybrid, TGIC or ARALDITE® PT-910 systems. ADDITOL® P 963 contains 5 % active substance and has been designed for indoor and outdoor use. ADDITOL® P 963 is easily handled and greatly improves dispersio...展開 ADDITOL® P 963 is a catalyst masterbatch to be used in hybrid, TGIC or ARALDITE® PT-910 systems. ADDITOL® P 963 contains 5 % active substance and has been designed for indoor and outdoor use. ADDITOL® P 963 is easily handled and greatly improves dispersion of the catalyst in powder coating formulations. 收起 | Request Sample |
| ADDITOL® P 964 | Allnex | 催化劑母料，設計用於混合型、TGIC或Araldite PT-910體系 | Request Sample |
| ADDITOL® P 966 | Allnex | ADDITOL® P 966 is a catalyst masterbatch for use in TGIC or ARALDITE® PT-910 systems. This resin contains 5% active ingredient in a superdurable polyester resin matrix. ADDITOL® P 966 is easily handled and greatly improves dispersion of the catalyst in po...展開 ADDITOL® P 966 is a catalyst masterbatch for use in TGIC or ARALDITE® PT-910 systems. This resin contains 5% active ingredient in a superdurable polyester resin matrix. ADDITOL® P 966 is easily handled and greatly improves dispersion of the catalyst in powder coating formulations when mixed with superdurable resins. This material can also be used with CRYLCOAT® 4420-0 and CRYLCOAT® 4430-0 at varying levels in dry-blend systems to achieve adjustable low gloss values. 收起 | Request Sample |
| ADDITOL® VXK 6365 | Allnex | ADDITOL® VXK 6365 increases the reactivity of polyisocyanates (blocked or not) with aqueous hydrofunctional binders. An enhanced reactivity of 2-pack isocyanate crosslinkable systems can negatively affect their storage stability. It is recommended to chec...展開 ADDITOL® VXK 6365 increases the reactivity of polyisocyanates (blocked or not) with aqueous hydrofunctional binders. An enhanced reactivity of 2-pack isocyanate crosslinkable systems can negatively affect their storage stability. It is recommended to check compatibility and potlife. 收起 | Request Sample |
| CYCAT® 205 | Allnex | CYCAT® 205 catalyst is an amine blocked para-toluene sulfonic acid catalyst supplied in ethylene glycol. It is recommended for accelerating the cure response of amino crosslinking resins while providing improved formulation package stability compared with...展開 CYCAT® 205 catalyst is an amine blocked para-toluene sulfonic acid catalyst supplied in ethylene glycol. It is recommended for accelerating the cure response of amino crosslinking resins while providing improved formulation package stability compared with the un-blocked para-toluene sulfonic acid CYCAT® 204 catalyst. It is especially recommended for use with highly alkylated amino crosslinking resins. It provides excellent stability in high solids and waterborne systems, and in the latter it can be added without causing binder precipitation, which can often occur due to a drop in pH. 收起 | Request Sample |
| CYCAT® 296-9 | Allnex | CYCAT® 296-9 Catalyst is an unique, phosphoric acid derivative "mild" catalyst developed to accelerate the cure of Cymel amino resins at normal baking temperatures, and to permit the cure of clear finishes and enamels within relatively low temperature ran...展開 CYCAT® 296-9 Catalyst is an unique, phosphoric acid derivative "mild" catalyst developed to accelerate the cure of Cymel amino resins at normal baking temperatures, and to permit the cure of clear finishes and enamels within relatively low temperature ranges. Coatings containing CYCAT® 296-9 catalyst, may be cured on low temperature bake schedules to the same hardness as similar uncatalyzed systems which require higher temperatures. Since the corrosion resistance of finishes containing high levels of catalyst may be lessened, the resistance properties should be carefully checked. 收起 | Request Sample |
| CYCAT® 4040 | Allnex | CYCAT® 4040催化劑是一種非常通用的催化劑材料，特別為催化速度一致設計，適用於各種溶劑中可溶的和水性熱固性擔體。它特別推薦用於需要強酸催化劑催化高烷基化叁聚氰胺- 甲醛交聯體系的固化的應用場合，可降低尿素樹脂體系的固化溫度。 | Request Sample |
| CYCAT® 4045 | Allnex | CYCAT® 4045催化劑是胺封端的對-甲苯磺酸催化劑。它推薦用於加速氨基交聯樹脂的固化反應，相比未封端的對-甲苯磺酸CYCAT 4040催化劑，它提供了改進的配方包裝穩定性。它特別推薦用於高烷基化氨基樹脂交聯使用。該產品為高固含和水性體系提供了出色的穩定性，而在後者中，它可以加入而不引起基料沉澱，而這往往是由於在pH值下降引發的。 | Request Sample |
| CYCAT® 500 | Allnex | 強磺酸催化劑，用於催化羧基、羥基和氨基官能團與烷基化蜜胺甲醛和脲醛交聯劑之間的固化反應。用於靜電噴涂和其它方式應用的涂料 | Request Sample |
| CYCAT® 600 | Allnex | CYCAT® 600A catalyst is an organic acid catalyst recommended to accelerate the crosslinking reaction of amino resins with polymers containing hydroxyl, carboxyl, or amide functionality. CYCAT® 600A is soluble in aliphatic and aromatic hydrocarbons, esters...展開 CYCAT® 600A catalyst is an organic acid catalyst recommended to accelerate the crosslinking reaction of amino resins with polymers containing hydroxyl, carboxyl, or amide functionality. CYCAT® 600A is soluble in aliphatic and aromatic hydrocarbons, esters, ketones, alcohols, glycol ethers and water. It may be used as a replacement for less soluble acid catalysts, such as para-toluene sulfonic acid, in low alcohol-containing formulations. For formulation of 1K systems, CYCAT® 600A should be blocked with an appropriate amine, such as AMP (2-amino-2-methyl-1-propanol). 收起 | Request Sample |
| CYCAT® 600A | Allnex | CYCAT® 600A catalyst is an organic acid catalyst recommended to accelerate the crosslinking reaction of amino resins with polymers containing hydroxyl, carboxyl, or amide functionality. CYCAT® 600A is soluble in aliphatic and aromatic hydrocarbons, esters...展開 CYCAT® 600A catalyst is an organic acid catalyst recommended to accelerate the crosslinking reaction of amino resins with polymers containing hydroxyl, carboxyl, or amide functionality. CYCAT® 600A is soluble in aliphatic and aromatic hydrocarbons, esters, ketones, alcohols, glycol ethers and water. It may be used as a replacement for less soluble acid catalysts, such as para-toluene sulfonic acid, in low alcohol-containing formulations. For formulation of 1K systems, CYCAT® 600A should be blocked with an appropriate amine, such as AMP (2-amino-2-methyl-1-propanol). 收起 | Request Sample |
| CYCAT® 6020 | Allnex | CYCAT® 6020 catalyst is an amine-neutralized dodecylbenzene sulfonic acid supplied in isopropanol. It is recommended for use as a catalyst to accelerate the cure of amino crosslinking agents and provide improved package stability. As a general rule, syste...展開 CYCAT® 6020 catalyst is an amine-neutralized dodecylbenzene sulfonic acid supplied in isopropanol. It is recommended for use as a catalyst to accelerate the cure of amino crosslinking agents and provide improved package stability. As a general rule, systems which employ a blocked catalyst will have a decreased rate of cure compared to those containing an unblocked catalyst, however, package stability with an unblocked catalyst will be poor. 收起 | Request Sample |
| CYCAT® 6030 | Allnex | CYCAT® 6030 catalyst is an amine-neutralized dodecylbenzene sulfonic acid supplied in isopropanol. It is recommended for use as a catalyst to accelerate the cure of amino crosslinking agents and provide improved package stability. As a general rule, syste...展開 CYCAT® 6030 catalyst is an amine-neutralized dodecylbenzene sulfonic acid supplied in isopropanol. It is recommended for use as a catalyst to accelerate the cure of amino crosslinking agents and provide improved package stability. As a general rule, systems which employ a blocked catalyst will have a decreased rate of cure compared to those containing an unblocked catalyst; however, package stability with an unblocked catalyst will be poor. 收起 | Request Sample |
| CYCAT® 6051 | Allnex | CYCAT® 6051 is an extremely hydrophobic acid catalyst based on dinonylnaphthalene sulfonic acid supplied at 50% active in n-butanol. It is an oil soluble sulfonic acid that gives excellent humidity resistance in high bake amino and phenolic systems. | Request Sample |
| CYCAT® 655 CATALYST | Allnex | CYCAT 655 catalyst is a strong acid catalyst based on dinonylnaphthalene disulfonic acid supplied in isobutanol. It is recommended to accelerate the cure between hydroxyl, carboxyl, and amide functional groups with alkylated amino crosslinking agents. CYC...展開 CYCAT 655 catalyst is a strong acid catalyst based on dinonylnaphthalene disulfonic acid supplied in isobutanol. It is recommended to accelerate the cure between hydroxyl, carboxyl, and amide functional groups with alkylated amino crosslinking agents. CYCAT 655 is recommended for use in electrocoating applications to achieve cure in the range of 110 - 135°C in 15 - 30 minutes, or to reduce the baking time at higher baking temperatures. CYCAT 655 is also recommended for coatings applied by other application techniques, providing improved adhesion and resistance properties compared with other sulfonic acid catalysts. Since CYCAT 655 is a free acid, package stability could be adversely impacted. 收起 | Request Sample |
| CYCAT® 6925 | Allnex | CYCAT® 6925 catalyst is an amine-blocked dodecylbenzene sulfonic acid catalyst supplied in isopropanol and 2-butoxyethanol. It is used to initiate and accelerate the cure of aminoplasts, such as those based on melamine, urea, and benzoguanamine which are ...展開 CYCAT® 6925 catalyst is an amine-blocked dodecylbenzene sulfonic acid catalyst supplied in isopropanol and 2-butoxyethanol. It is used to initiate and accelerate the cure of aminoplasts, such as those based on melamine, urea, and benzoguanamine which are used to crosslink 1K thermoset systems. This product can be used in food contact applications. For the latest information about the compliance status with FDA, EU, Chinese or other food regulations. 收起 | Request Sample |
| CYCAT® VXK 6364 | Allnex | CYCAT® VXK 6364 is a catalyst which is suitable to accelerate the cure of fully alkylated melamine formaldehyde resins (hexamethoxymethylmelamine) like CYMEL 303 LF. Post curing of films containing CYCAT® VXK 6364 can occur. CYCAT® VXK 6364 is usable in s...展開 CYCAT® VXK 6364 is a catalyst which is suitable to accelerate the cure of fully alkylated melamine formaldehyde resins (hexamethoxymethylmelamine) like CYMEL 303 LF. Post curing of films containing CYCAT® VXK 6364 can occur. CYCAT® VXK 6364 is usable in solvent and waterborne thermosetting vehicles. 收起 | Request Sample |
| CYCAT® VXK 6395 | Allnex | CYCAT® VXK 6395 is an amino blocked acidic catalyst. It was developed for cross-linking reaction of urea and melamine curing systems at low temperatures. Typical application areas are stoving paint systems for general industry and for OEM automotive syste...展開 CYCAT® VXK 6395 is an amino blocked acidic catalyst. It was developed for cross-linking reaction of urea and melamine curing systems at low temperatures. Typical application areas are stoving paint systems for general industry and for OEM automotive systems. 收起 | Request Sample |
| CYCAT® XK 406 N | Allnex | Cycat® XK 406 N is a light to dark reddish coloured, low viscous liquid, phosphoric acid derivate. It increases the crosslinking speed of heat curing coating systems based on phenolic/-epoxide resin combinations. A significant improvement of adhesion prop...展開 Cycat® XK 406 N is a light to dark reddish coloured, low viscous liquid, phosphoric acid derivate. It increases the crosslinking speed of heat curing coating systems based on phenolic/-epoxide resin combinations. A significant improvement of adhesion properties is often seen in connection with the use of this product; furthermore, the use of Cycat® XK 406 N often leads to an improved sulphur staining resistance of interior can coating systems. 收起 | Request Sample |
