| EBECRYL® 884 | Allnex | EBECRYL® 884 is an undiluted polyesteracrylate resin. Films of EBECRYL® 884 cured by ultraviolet light (UV) or electron beam (EB) exhibits high flexibility and excellent abrasion resistance. It is recommended for use in: parquet floor applications, furnit...展開 EBECRYL® 884 is an undiluted polyesteracrylate resin. Films of EBECRYL® 884 cured by ultraviolet light (UV) or electron beam (EB) exhibits high flexibility and excellent abrasion resistance. It is recommended for use in: parquet floor applications, furniture coatings, plastic coatings, and resilient flooring. 收起 | Request Sample |
| EBECRYL® 888 | Allnex | EBECRYL® 888 is a low viscosity polyester acrylate designed for use in UV/EB primer coatings to provide ink receptivity and prevent plasticizer migration. Films containing EBECRYL 888 which are cured by ultraviolet light (UV) or electron beam (EB) exhibit...展開 EBECRYL® 888 is a low viscosity polyester acrylate designed for use in UV/EB primer coatings to provide ink receptivity and prevent plasticizer migration. Films containing EBECRYL 888 which are cured by ultraviolet light (UV) or electron beam (EB) exhibit good adhesion, good abrasion and high flexibility. EBECRYL 888 is recommended for use in flexographic or gravure primer coatings printed on polyester, plasticized PVC and uncoated films. 收起 | Request Sample |
| EBECRYL® 8894 | Allnex | EBECRYL® 8894 is an aliphatic urethane acrylate, diluted in butyl acetate, designed for applications requiring high humidity and abrasion resistance. Films of EBECRYL®8894 cured via exposure to ultraviolet light (UV) or electron beam (EB) exhibit excellen...展開 EBECRYL® 8894 is an aliphatic urethane acrylate, diluted in butyl acetate, designed for applications requiring high humidity and abrasion resistance. Films of EBECRYL®8894 cured via exposure to ultraviolet light (UV) or electron beam (EB) exhibit excellent exterior durability, good toughness and flexibility, as well as the non-yellowing properties typical of an aliphatic urethane. 收起 | Request Sample |
| EBECRYL® 8896 | Allnex | EBECRYL® 8896 is a revolutionary aliphatic urethane acrylate designed for application(s) requiring haptic properties (e.g. “soft touch/feel”). Films of EBECRYL®8896 cured via exposure to ultraviolet light (UV) or electron beam (EB) are tough, flexible, an...展開 EBECRYL® 8896 is a revolutionary aliphatic urethane acrylate designed for application(s) requiring haptic properties (e.g. “soft touch/feel”). Films of EBECRYL®8896 cured via exposure to ultraviolet light (UV) or electron beam (EB) are tough, flexible, and resistant to yellowing. EBECRYL®8896 is compatible with variety of fillers, pigments, waxes, and polymeric beads allowing formulator maximum formulating latitude to create a number of haptic properties ranging from a velvety/silky feel to EBECRYL®8896’s intrinsic rubbery feel. 收起 | Request Sample |
| EBECRYL® 892 | Allnex | EBECRYL® 892 is a light colour, low viscosity tetra-functional acrylated oligomer. It also improves the hardness and solvent resistance of cured inks and coatings. EBECRYL® 892 is particularly useful for lithographic offset inks, flexo inks and overprint ...展開 EBECRYL® 892 is a light colour, low viscosity tetra-functional acrylated oligomer. It also improves the hardness and solvent resistance of cured inks and coatings. EBECRYL® 892 is particularly useful for lithographic offset inks, flexo inks and overprint varnishes. 收起 | Request Sample |
| EBECRYL® 893 | Allnex | EBECRYL® 893是一款專門為UV固化領域開發的改性聚酯丙烯酸酯，可應用於混凝土及乙烯基樹脂複合瓷磚（VCT）地坪塗料。EBECRYL® 893的低粘度也為實現施工所需低粘度配方提供了餘地。它推薦用於UV固化領域，用於混凝土和VCT塗料。 | Request Sample |
| EBECRYL® 895 | Allnex | Ebecryl® 895 is a multifunctional monomer which polymerizes when exposed to sources of free radicals. It is composed primarily of the pentaacrylate and hexaacrylate esters of dipentaerythritol. Ebecryl® 895 is particularly useful in UV (ultraviolet) and E...展開 Ebecryl® 895 is a multifunctional monomer which polymerizes when exposed to sources of free radicals. It is composed primarily of the pentaacrylate and hexaacrylate esters of dipentaerythritol. Ebecryl® 895 is particularly useful in UV (ultraviolet) and EB (electron beam) curable inks and coatings where improved cure response, hardness and scratch/abrasion resistance are required. 收起 | Request Sample |
| EBECRYL® 896 | Allnex | EBECRYL® 896 is a multifunctional monomer which polymerizes when exposed to sources of free radicals. It is a low viscosity DPHA composed primarily of pentaacrylate and hexaacrylate esters of dipentaerythritol. It is particularly useful in UV/EB inks and ...展開 EBECRYL® 896 is a multifunctional monomer which polymerizes when exposed to sources of free radicals. It is a low viscosity DPHA composed primarily of pentaacrylate and hexaacrylate esters of dipentaerythritol. It is particularly useful in UV/EB inks and coatings where improved cure response, hardness and scratch/abrasion resistance are required. 收起 | Request Sample |
| EBECRYL® 898 | Allnex | EBECRYL® 898 is a special purpose, 100% solids tetra functional polyester acrylate that extends the matting effect of a silica containing formulation. It is characterized by extended matting effect, low viscosity, low odour, and fast cure. This product is...展開 EBECRYL® 898 is a special purpose, 100% solids tetra functional polyester acrylate that extends the matting effect of a silica containing formulation. It is characterized by extended matting effect, low viscosity, low odour, and fast cure. This product is recommended for wood and plastic coatings, paper upgrading, flexographic inks, and EB cured paper-foil coatings. 收起 | Request Sample |
| EBECRYL® IBOA | Allnex | EBECRYL® IBOA, Isobornyl acrylate, is a high purity, low colour monofunctional diluent monomer which polymerizes when exposed to sources of free radicals. It is a diluent compatible with a wide range of acrylated oligomers used in UV/EB curing application...展開 EBECRYL® IBOA, Isobornyl acrylate, is a high purity, low colour monofunctional diluent monomer which polymerizes when exposed to sources of free radicals. It is a diluent compatible with a wide range of acrylated oligomers used in UV/EB curing applications. Good viscosity reduction and low shrinkage properties make this product useful in a variety of overprint varnishes, inks, and coatings. 收起 | Request Sample |
| EBECRYL® IBOMA | Allnex | EBECRYL® IBOMA (isobornyl methacrylate) is a mono-functional monomer which polymerizes when exposed to sources of free radicals. EBECRYL® IBOMA forms homopolymers and copolymers. EBECRYL® IBOMA is compatible with a wide range of acrylated- and methacrylat...展開 EBECRYL® IBOMA (isobornyl methacrylate) is a mono-functional monomer which polymerizes when exposed to sources of free radicals. EBECRYL® IBOMA forms homopolymers and copolymers. EBECRYL® IBOMA is compatible with a wide range of acrylated- and methacrylated resins. 收起 | Request Sample |
| EBECRYL® LED 02 | Allnex | EBECRYL® LED 02, a mercapto modified polyester acrylate resin, can be added as a co-resin to UV curable formulations. EBECRYL® LED 02 transforms formulations into UV LED, UVA, or low energy curable systems by providing better surface cure. In addition, th...展開 EBECRYL® LED 02, a mercapto modified polyester acrylate resin, can be added as a co-resin to UV curable formulations. EBECRYL® LED 02 transforms formulations into UV LED, UVA, or low energy curable systems by providing better surface cure. In addition, this co-resin can also be used to obtain better surface cure in high energy cure formulations. EBECRYL® LED 02 provides better surface cure by mitigating oxygen inhibition of the free radical process. 收起 | Request Sample |
| EBECRYL® LED 03 | Allnex | EBECRYL® LED 03 is a low viscosity amine modified polyether acrylate oligomer that can be added as a co‐resin to UV curable formulations. EBECRYL® LED 03 – when combined with an appropriate photoinitiator system – transforms formulations into UV LED, UVA,...展開 EBECRYL® LED 03 is a low viscosity amine modified polyether acrylate oligomer that can be added as a co‐resin to UV curable formulations. EBECRYL® LED 03 – when combined with an appropriate photoinitiator system – transforms formulations into UV LED, UVA, or low energy curable systems by providing improved surface cure. In addition, this effect is also seen in high energy cure formulations. The improved surface cure is obtained by mitigating oxygen inhibition of the free radical process and/or by being an amine synergist for Norrish type II photoinitiators. 收起 | Request Sample |
| EBECRYL® LED 04 | Allnex | EBECRYL® LED 04 is an acrylated polyamine that can be added as a co-resin to UV curable formulations. EBECRYL® LED 04 – when combined with an appropriate photo initiator system – transforms formulations into UV LED, UVA, or low energy curable systems by p...展開 EBECRYL® LED 04 is an acrylated polyamine that can be added as a co-resin to UV curable formulations. EBECRYL® LED 04 – when combined with an appropriate photo initiator system – transforms formulations into UV LED, UVA, or low energy curable systems by providing improved surface cure. In addition, this effect is also seen in high energy cure formulations. The improved surface cure is obtained by mitigating oxygen inhibition of the free radical process and/or by being an amine synergist for Norrish type II photo initiators. Coating and inks based on EBECRYL® LED 04 exhibit a low odor after UV or EB curing. Due to its hydrophobic nature EBECRYL® LED 04 can also be used in offset inks applications as a replacement of aminobenzoate synergists. 收起 | Request Sample |
| EBECRYL® LED 05 | Allnex | EBECRYL® LED 05 is an acrylated polyamine that can be added as a co-resin to UV curable formulations. EBECRYL® LED 05 – when combined with an appropriate photo initiator system – transforms formulations into UV LED, UVA, or low energy curable systems by...展開 EBECRYL® LED 05 is an acrylated polyamine that can be added as a co-resin to UV curable formulations. EBECRYL® LED 05 – when combined with an appropriate photo initiator system – transforms formulations into UV LED, UVA, or low energy curable systems by providing improved surface cure. In addition, this effect is also seen in high energy cure formulations. The improved surface cure is obtained by mitigating oxygen inhibition of the free radical process and/or by being an amine synergist for Norrish type II photo initiators. Coating and inks based on EBECRYL® LED 05 exhibit a low odor after UV or EB curing. Due to its unique structure EBECRYL® LED 05 based flexo inks have improved ink flow stability due to better compatibility with organic pigments. 收起 | Request Sample |
| EBECRYL® LEO 10101 | Allnex | EBECRYL® LEO 10101 is a self-curing multifunctional acrylate enabling the UV curing of printing inks and coatings, not requiring additional photoinitiator, which reduces the risk of migration in indirect food contact applications. It is specifically devel...展開 EBECRYL® LEO 10101 is a self-curing multifunctional acrylate enabling the UV curing of printing inks and coatings, not requiring additional photoinitiator, which reduces the risk of migration in indirect food contact applications. It is specifically developed for making high reactive nicely flowing low migration Flexo inks. This product can be used for different colours, also for white. It is recommended to use 20-30% EBECRYL® LEO 10101 in an ink or coating to reach a correct surface and through cure. 收起 | Request Sample |
| EBECRYL® LEO 10103 | Allnex | EBECRYL® LEO 10103 is a multifunctional acrylate that in the presence of an amine synergist can enable the UV curing of printing inks and coatings without, or with only a minimal amount, of photoinitiator. The elimination or reduction of photoinitiator de...展開 EBECRYL® LEO 10103 is a multifunctional acrylate that in the presence of an amine synergist can enable the UV curing of printing inks and coatings without, or with only a minimal amount, of photoinitiator. The elimination or reduction of photoinitiator decreases the potential for migration in indirect food contact applications. EBECRYL® LEO 10103 can be used for low migration over print varnishes along with flexographic and offset inks in the entire colour range, including white. EBECRYL® LEO 10103 at 10-20% by weight in a coating or ink can provide a good balance of surface and through cure. 收起 | Request Sample |
| EBECRYL® LEO 10501 | Allnex | EBECRYL® LEO 10501 is a trifunctional diluting oligomer that provides low extractables, low odor and low migration after UV or EB curing. It is compatible with a wide range of acrylated resins. It can be used to produce low odor and low migrating UV overp...展開 EBECRYL® LEO 10501 is a trifunctional diluting oligomer that provides low extractables, low odor and low migration after UV or EB curing. It is compatible with a wide range of acrylated resins. It can be used to produce low odor and low migrating UV overprint varnishes (OPV’s) and inks for indirect food contact applications. EBECRYL® LEO 10501 is specially recommended to formulate low extractable and low odor UV/EB curable OPV’s and inks for flexography, lithography and screen applications. 收起 | Request Sample |
| EBECRYL® LEO 10502 | Allnex | EBECRYL® LEO 10502 is a low viscosity polymeric tetrafunctional polyether acrylate that provides low extractables, low odor and low migration after UV or EB curing. It is recommended for use in low odor and low migrating UV/EB curable overprint varnishes ...展開 EBECRYL® LEO 10502 is a low viscosity polymeric tetrafunctional polyether acrylate that provides low extractables, low odor and low migration after UV or EB curing. It is recommended for use in low odor and low migrating UV/EB curable overprint varnishes (OPV’s) and inks. 收起 | Request Sample |
| EBECRYL® LEO 10551 | Allnex | EBECRYL® LEO 10551 is a low viscosity amine modified polyether acrylate oligomer that provides low extractables, low odor and low migration after UV or EB curing. It is recommended for use in low odor and low migrating UV overprint varnishes (OPV’s) and i...展開 EBECRYL® LEO 10551 is a low viscosity amine modified polyether acrylate oligomer that provides low extractables, low odor and low migration after UV or EB curing. It is recommended for use in low odor and low migrating UV overprint varnishes (OPV’s) and inks for indirect food packaging applications. 收起 | Request Sample |
| EBECRYL® LEO 10552 | Allnex | EBECRYL® LEO 10552 is a low viscosity amine modified polyether acrylate oligomer that provides low extractables, low odor and low migration after UV or EB curing. It is recommended for use in low odor and low migrating UV overprint varnishes (OPV’s) and i...展開 EBECRYL® LEO 10552 is a low viscosity amine modified polyether acrylate oligomer that provides low extractables, low odor and low migration after UV or EB curing. It is recommended for use in low odor and low migrating UV overprint varnishes (OPV’s) and inks for indirect food packaging applications. 收起 | Request Sample |
| EBECRYL® LEO 10553 | Allnex | EBECRYL® LEO 10553 is a low viscosity polymeric amine modified polyether acrylate that provides low extractables, low odor and low migration and after UV or EB curing. It is recommended for use in low odor and low migrating UV overprint varnishes (OPV’s) ...展開 EBECRYL® LEO 10553 is a low viscosity polymeric amine modified polyether acrylate that provides low extractables, low odor and low migration and after UV or EB curing. It is recommended for use in low odor and low migrating UV overprint varnishes (OPV’s) and inks for indirect food packaging applications. 收起 | Request Sample |
| EBECRYL® LEO 10601 | Allnex | EBECRYL® LEO 10601 is a modified epoxy acrylate that provides low extractables and low odor after UV or EB curing. It exhibits good pigment wetting properties and produces UV offset inks exhibiting enhanced ink- water balance and low misting. It may also ...展開 EBECRYL® LEO 10601 is a modified epoxy acrylate that provides low extractables and low odor after UV or EB curing. It exhibits good pigment wetting properties and produces UV offset inks exhibiting enhanced ink- water balance and low misting. It may also be used to produce UV flexo inks with good flow, high gloss and high reactivity. It is also suitable for screen and gravure application and OPV. 收起 | Request Sample |
| EBECRYL® LEO 10801 | Allnex | EBECRYL® LEO 10801 is a hexafunctional polyester acrylate oligomer that provides high reactivity and the proper ink-water balance necessary for good lithographic printing. Lithographic inks based on EBECRYL® LEO 10801 display excellent rheological propert...展開 EBECRYL® LEO 10801 is a hexafunctional polyester acrylate oligomer that provides high reactivity and the proper ink-water balance necessary for good lithographic printing. Lithographic inks based on EBECRYL® LEO 10801 display excellent rheological properties ensuring good ink transfer from the printing plate to the blanket and then to the substrate, combined with good dot definition. It is recommended for use in: lithographic and flexographic inks, offset OPV, and inks and coatings for indirect food packaging and related applications. 收起 | Request Sample |
| EBECRYL® MPDDA | Allnex | EBECRYL® MPDDA is a difunctional monomer which polymerizes when exposed to sources of free radicals. This difunctional acrylated monomer is particularly useful in inks and coatings where improved elasticity, weathering and adhesion are desired in combinat...展開 EBECRYL® MPDDA is a difunctional monomer which polymerizes when exposed to sources of free radicals. This difunctional acrylated monomer is particularly useful in inks and coatings where improved elasticity, weathering and adhesion are desired in combination with an excellent water resistance. 收起 | Request Sample |
| EBECRYL® P115 | Allnex | EBECRYL® P115 is a copolymerizable amine used as a hydrogen donor, or photoactivator, in ultraviolet light (UV) curable coatings and inks. When used in formulations in combination with a photosensitizer (e.g. ADDITOL® BP), EBECRYL® P115 provides rapid UV ...展開 EBECRYL® P115 is a copolymerizable amine used as a hydrogen donor, or photoactivator, in ultraviolet light (UV) curable coatings and inks. When used in formulations in combination with a photosensitizer (e.g. ADDITOL® BP), EBECRYL® P115 provides rapid UV cure response in air by mitigating the effects of oxygen inhibition at the coating or ink surface. It has recommended levels are from 5 to 15% based on the total formulation, usually combined with 3-5% photosensitizer. EBECRYL® P115 is recommended as a reactive co-initiator in the following applications: overprint varnishes, screen and flexo inks, wood topcoats, clear coatings on paper and plastics, and pigmented coatings. 收起 | Request Sample |
| EBECRYL® P116 | Allnex | EBECRYL® P 116 is a reactive amine additive used in place of more volatile amine synergists to increase the cure speed of ultraviolet (UV) cured coatings. When EBECRYL® P 116 is used in combination with other photoinitiators an increase in cure speed, esp...展開 EBECRYL® P 116 is a reactive amine additive used in place of more volatile amine synergists to increase the cure speed of ultraviolet (UV) cured coatings. When EBECRYL® P 116 is used in combination with other photoinitiators an increase in cure speed, especially at the surface, can be realized. It is recommended for use in: overprint varnishes, wood fillers and top coats, and clear coatings on paper and plastics. 收起 | Request Sample |
| EBECRYL® P39 | Allnex | EBECRYL® P39 is a polymeric benzophenone derivative diluted with 25% of EBECRYL® LEO 10501 that functions as the photosensitizer in hydrogen abstraction type radical photoinitiator systems. EBECRYL® P39 has been designed for use in the formulation of UV c...展開 EBECRYL® P39 is a polymeric benzophenone derivative diluted with 25% of EBECRYL® LEO 10501 that functions as the photosensitizer in hydrogen abstraction type radical photoinitiator systems. EBECRYL® P39 has been designed for use in the formulation of UV coatings that exhibit little or no odor after curing. It has recommended levels are from 8 to 10% based on total formulation. It should be used in combination with amine co-initiators such as EBECRYL® P115 or EBECRYL® 7100. EBECRYL® P39 is recommended for use in over print varnishes where low residual odor is required. 收起 | Request Sample |
| EBECRYL® TMPTMA | Allnex | EBECRYL® TMPTMA, CAS No. 3290-92-4, is a trifunctional monomer which polymerizes when exposed to sources of free radicals. EBECRYL® TMPTMA forms homopolymers and copolymers. EBECRYL® TMPTMA is compatible with a wide range of acrylated- and methacrylated r...展開 EBECRYL® TMPTMA, CAS No. 3290-92-4, is a trifunctional monomer which polymerizes when exposed to sources of free radicals. EBECRYL® TMPTMA forms homopolymers and copolymers. EBECRYL® TMPTMA is compatible with a wide range of acrylated- and methacrylated resins. 收起 | Request Sample |
| EDAPLAN® LA 402 | Munzing Chemie | EDAPLAN® LA 402 is a yellowish, clear liquid suitable for all aqueous coating and printing ink systems. It is supplied as water insoluble acid and has to be neutralized before use. The polymer is compatible with all common resin systems. Advantages of ED...展開 EDAPLAN® LA 402 is a yellowish, clear liquid suitable for all aqueous coating and printing ink systems. It is supplied as water insoluble acid and has to be neutralized before use. The polymer is compatible with all common resin systems. Advantages of EDAPLAN® LA 402 is that it improves gloss and reduces haze, is non-silicone, water resistance is not affected, and it prevents surface defects. 收起 | |
| EDAPLAN® LA 403 | Munzing Chemie | EDAPLAN® LA 403 is a brown liquid suitable for all aqueous coating and printing ink systems. The polymer is compatible with all common resin systems. Advantages of using EDAPLAN® LA 403 include improved gloss and reduced haze, silicone-free, solvent-free,...展開 EDAPLAN® LA 403 is a brown liquid suitable for all aqueous coating and printing ink systems. The polymer is compatible with all common resin systems. Advantages of using EDAPLAN® LA 403 include improved gloss and reduced haze, silicone-free, solvent-free, water resistance is not affected, prevents surface defects, and reduction of foam tendency. Main application areas include chemical curing systems, e.g. wood coatings, automotive, OEM and repair coatings, industrial coatings, 2K-systems, and printing inks and overprint varnishes. 收起 | |
| EDAPLAN® LA 410 | Munzing Chemie | EDAPLAN® LA 410 is a colourless to slightly yellowish liquid, suitable for all non-aqueous coating and printing ink systems. It improves surface properties and can be used in curtain coatings. EDAPLAN® LA 410 is recommended for improved scratch resistance...展開 EDAPLAN® LA 410 is a colourless to slightly yellowish liquid, suitable for all non-aqueous coating and printing ink systems. It improves surface properties and can be used in curtain coatings. EDAPLAN® LA 410 is recommended for improved scratch resistance and slip of metallic effect lacquers and varnishes. It prevents surface defects like craters and orange peel. EDAPLAN® LA 410 provides defoaming and degassing. 收起 | |
| EDAPLAN® LA 452 | Munzing Chemie | EDAPLAN® LA 452 is a yellow liquid wetting and leveling agent for aqueous systems. EDAPLAN® LA 452 reduces the surface tension of aqueous systems without increasing the foam formation. Thus substrate wetting, leveling and gloss are improved. EDAPLAN® LA ...展開 EDAPLAN® LA 452 is a yellow liquid wetting and leveling agent for aqueous systems. EDAPLAN® LA 452 reduces the surface tension of aqueous systems without increasing the foam formation. Thus substrate wetting, leveling and gloss are improved. EDAPLAN® LA 452 is free of silicone and has no adverse effects on recoatability. This additive is compatible with all common resin systems. Advantages of using EDAPLAN® LA 452 include gloss improvement and reduction of haze, prevention of surface defects like craters and Bénard cells, improvement of substrate wetting, no increase in foam, and good recoatability. Main application areas include architectural coatings, wood and furniture coatings, automotive OEM and repair coatings, industrial coatings, and printing inks and overprint varnishes. 收起 | |
| EMTEC 5005 | Allnex | Emtec 5005 is a colloid stabilised styrene acrylic emulsion of fine to medium particle size. It exhibits exceptional water resistance and superior adhesion to a wide variety of surfaces. | Request Sample |
| EMTEC 5021 | Allnex | EMTEC™ 5021 is an APE free styrene acrylic emulsion of fine particle size which film forms below its theoretical Tg. It exhibits a faster build-up of water resistance than the acrylics and even more outstanding water resistance and adhesion of the dried f...展開 EMTEC™ 5021 is an APE free styrene acrylic emulsion of fine particle size which film forms below its theoretical Tg. It exhibits a faster build-up of water resistance than the acrylics and even more outstanding water resistance and adhesion of the dried film. 收起 | Request Sample |
| Epoxy Resin SM828 | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | SM828 is an undiluted, clear difunctional bisphenol A/epichlorohydrin derived liquid epoxy resin. It is a widely-used, general purpose liquid epoxy resin. This product is recognized as the standard from which many variations have been developed. It is rec...展開 SM828 is an undiluted, clear difunctional bisphenol A/epichlorohydrin derived liquid epoxy resin. It is a widely-used, general purpose liquid epoxy resin. This product is recognized as the standard from which many variations have been developed. It is recommended for adhesives, marine and protective coatings, can and coil coatings, automotive coatings, and more. 收起 | |
| FOAM BAN® SB-81 | Munzing Chemie | FOAM BAN® SB-81 is a liquid yellow-brown, turbid defoamer that is a blend of hydrophobic silica and mineral oil. It is a defoamer that is used for industrial fluids that is commonly used in industrial, architectural and wood coatings, as well as printing ...展開 FOAM BAN® SB-81 is a liquid yellow-brown, turbid defoamer that is a blend of hydrophobic silica and mineral oil. It is a defoamer that is used for industrial fluids that is commonly used in industrial, architectural and wood coatings, as well as printing inks and adhesives. 收起 | |
| FOAM BAN® SB-88 | Munzing Chemie | FOAM BAN® SB-88 is a liquid yellow-brown, turbid defoamer that is a blend of hydrophobic silica and mineral oil. It is a defoamer for aqueous systems that is commonluy used in industrial, architectural and wood coatings, as well as printing inks and adhes...展開 FOAM BAN® SB-88 is a liquid yellow-brown, turbid defoamer that is a blend of hydrophobic silica and mineral oil. It is a defoamer for aqueous systems that is commonluy used in industrial, architectural and wood coatings, as well as printing inks and adhesives. 收起 | |
| FOAMTROL 105 | Munzing Chemie | FOAMTROL 105 is a translucent grey defoamer for aqueous systems. It is a low viscosity silicone compound that is used in non-aqueous and aqueous products and systems. It is used to prepare silicone-based foam and is also commonly used in adhesives and pri...展開 FOAMTROL 105 is a translucent grey defoamer for aqueous systems. It is a low viscosity silicone compound that is used in non-aqueous and aqueous products and systems. It is used to prepare silicone-based foam and is also commonly used in adhesives and printing inks. 收起 | |
| FOAMTROL 110 | Munzing Chemie | FOAMTROL 110 is a translucent grey defoamer for aqueous systems. It is a low viscosity siloxane compound suitable for UV system printing inks. | |
| FOAMTROL 410 | Munzing Chemie | FOAMTROL 410 is a liquid off-white opaque defoamer for aqueous systems that silicone emulsion in water. It is primarily an active, food-grade, silicone emulsion that is used for food-contact approved products and is also used as a defoamer in coatings and...展開 FOAMTROL 410 is a liquid off-white opaque defoamer for aqueous systems that silicone emulsion in water. It is primarily an active, food-grade, silicone emulsion that is used for food-contact approved products and is also used as a defoamer in coatings and adhesives. 收起 | |
| G-CURE™ 17-0105 | Allnex | G-Cure® 17-0105 (formerly G-Cure® 105P70) acrylic resin is designed for high build, higher volume solids acrylic urethane topcoats and primers. It will react at room temperature with aliphatic polyisocyanates to give excellent application properties. Form...展開 G-Cure® 17-0105 (formerly G-Cure® 105P70) acrylic resin is designed for high build, higher volume solids acrylic urethane topcoats and primers. It will react at room temperature with aliphatic polyisocyanates to give excellent application properties. Formulations can be designed for high gloss, lower solvent industrial maintenance coatings. 收起 | Request Sample |
| G-Cure® 17-0807 | Allnex | G-CURE 17-0807 (formerly G-CURE 806PT60) acrylic resin is a hydroxyl functional acrylic copolymer designed to react at room temperature with aliphatic polyisocyanates to produce high performance coatings. Coatings formulated with G-CURE 17-0807 exhibit ou...展開 G-CURE 17-0807 (formerly G-CURE 806PT60) acrylic resin is a hydroxyl functional acrylic copolymer designed to react at room temperature with aliphatic polyisocyanates to produce high performance coatings. Coatings formulated with G-CURE 17-0807 exhibit outstanding durability, chemical resistance and color retention. Coatings produced with G-CURE 17-0807 are suitable for metal, wood and plastic, particularly when heat sensitivity is a concern. 收起 | Request Sample |
| G-CURE™ 17-0870 | Allnex | G-Cure® 17-0870 (formerly G-Cure® 870BLX50) acrylic resin is a hydroxyl functional acrylic resin designed to react at room temperature with aliphatic polyisocyanates to produce high performance coatings. Coatings formulated with G-Cure® 17-0870 have fast ...展開 G-Cure® 17-0870 (formerly G-Cure® 870BLX50) acrylic resin is a hydroxyl functional acrylic resin designed to react at room temperature with aliphatic polyisocyanates to produce high performance coatings. Coatings formulated with G-Cure® 17-0870 have fast lacquer-like dry, but provide long pot life due to controlled reactivity. The cured films exhibit excellent durability and good chemical resistance. 收起 | Request Sample |
| HDDA | Allnex | HDDA (Hexanediol diacrylate) is a difunctional reactive diluent that is commonly used as a component of ultraviolet light (UV) and electron beam (EB) curable coatings and inks. HDDA is particularly useful in coatings and inks where improved elasticity, w...展開 HDDA (Hexanediol diacrylate) is a difunctional reactive diluent that is commonly used as a component of ultraviolet light (UV) and electron beam (EB) curable coatings and inks. HDDA is particularly useful in coatings and inks where improved elasticity, weathering and adhesion are desired in combination with excellent water resistance. 收起 | Request Sample |
| HETRON® 980/35-45 | Allnex | HETRON® 980/35-45 is a prepromoted, thixotropic, wax free, Novolac epoxy based vinyl ester resin containing less than 35% styrene. | Request Sample |
| LUBA-print 103/A-neu | Munzing Chemie | LUBA-print 103/A-neu is a white zinc stearate wax dispersion additive for paints and printing inks. Applications include use in wood lacquers to improve the sand-ability. | |
| LUBA-print 121/C | Munzing Chemie | LUBA-print 121/C is a white hydrocarbon wax dispersion additive for paints and printing inks. It is used to improve slip property with high gloss. Applications include use in solvent-based lacquers for foil-coatings. | |
| LUBA-print 121/F (ND) | Munzing Chemie | LUBA-print 121/F (ND) is a white functional blend wax dispersion additive for paints and printing inks. It is used to improve the slip property with high gloss. Applications include use in solvent-based lacquers for Can and Coil-Coatings. | |
| LUBA-print 138/E | Munzing Chemie | LUBA-print 138/E is a white PTFE wax dispersion additive for paints and printing inks. It is used to improve the slip and anti-blocking properties. Applications include water-based printing inks and paint systems. | |
| LUBA-print 154/C | Munzing Chemie | LUBA-print 154/C is a white polyethylene wax dispersion additive for paints and printing inks. In aqueous paint-systems, it is used to improve slip and mar resistance. In aqueous flexo printing inks, it is used to improve the rub resistance. In hot melts,...展開 LUBA-print 154/C is a white polyethylene wax dispersion additive for paints and printing inks. In aqueous paint-systems, it is used to improve slip and mar resistance. In aqueous flexo printing inks, it is used to improve the rub resistance. In hot melts, it is used to improve anti-blocking properties. 收起 | |
| LUBA-print 154/S | Munzing Chemie | LUBA-print 154/S is a white polyethylene wax dispersion additive for paints and printing inks. In aqueous paint-systems it is used to improve slip and mar resistance. In aqueous flexo printing inks, it is used to improve rub resistance. | |
| LUBA-print 161/T | Munzing Chemie | LUBA-print 161/T is a white amide wax dispersion additive for paints and printing inks. It is used in solvent-containing varnishes and printing inks to improve the slip property. | |
| LUBA-print 164/G | Munzing Chemie | LUBA-print 164/G is a white amide wax dispersion additive for paints and printing inks. It finds application as a aqueous lubricant and release agent. In water-based lacquers, it is used to improve slip and scratch resistance.It is also a pelletizing aid ...展開 LUBA-print 164/G is a white amide wax dispersion additive for paints and printing inks. It finds application as a aqueous lubricant and release agent. In water-based lacquers, it is used to improve slip and scratch resistance.It is also a pelletizing aid for granule-technique to improve the anti-blocking effect. 收起 | |
| LUBA-print 164/R | Munzing Chemie | LUBA-print 164/R is a white amide wax dispersion additive for paints and printing inks. It is used as a aqueous lubricant and release agent for water-based lacquers to improve the anti-blocking, slip and scratch resistance. Other applications include acti...展開 LUBA-print 164/R is a white amide wax dispersion additive for paints and printing inks. It is used as a aqueous lubricant and release agent for water-based lacquers to improve the anti-blocking, slip and scratch resistance. Other applications include acting as a pelletizing aid for granule technique to be used in underwater pelletizing and keeps the granules non-sticking and free-flowing. 收起 | |
| LUBA-print 184/W | Munzing Chemie | LUBA-print 184/W is a white PE / PTFE wax dispersion additive for paints and printing inks. It is used in aqueous coatings to improve surface slip and mar resistance. In aqueous flexo printing inks it is used to improve rub resistance. | |
| LUBA-print 2036 A | Munzing Chemie | LUBA-print 2036 A is a white polyethylene wax dispersion additive for paints and printing inks. It is used in solvent-based and aqueous gravure and flexo-printing inks to improve rub resistance. In solvent-based and aqueous lacquers it is used to improve ...展開 LUBA-print 2036 A is a white polyethylene wax dispersion additive for paints and printing inks. It is used in solvent-based and aqueous gravure and flexo-printing inks to improve rub resistance. In solvent-based and aqueous lacquers it is used to improve mar resistance and slip property. 收起 | |
| LUBA-print 204/B-NEU | Munzing Chemie | LUBA-print 204/B-NEU is an opaque copolymer wax dispersion additive for paints and printing inks. It is used in water reducible paint-systems to improve surface hardness with good gloss stability, with excellent adhesion on metal and temporary corrosion r...展開 LUBA-print 204/B-NEU is an opaque copolymer wax dispersion additive for paints and printing inks. It is used in water reducible paint-systems to improve surface hardness with good gloss stability, with excellent adhesion on metal and temporary corrosion resistance. 收起 | |
| LUBA-print 232/D | Munzing Chemie | LUBA-print 232/D is a white PE-Wax combination wax dispersion additive for paints and printing inks. It is used in solvent-based gravure and flexo printing inks to improve rub resistance. In solvent-based lacquer systems it is used to improve mar resistan...展開 LUBA-print 232/D is a white PE-Wax combination wax dispersion additive for paints and printing inks. It is used in solvent-based gravure and flexo printing inks to improve rub resistance. In solvent-based lacquer systems it is used to improve mar resistance. 收起 | |
| LUBA-print 233/H | Munzing Chemie | LUBA-print 233/H is a light yellow functional blend wax dispersion additive for paints and printing inks. It is used in water-based wax-stains to improve water repeallance and positive-effect. | |
| LUBA-print 246/D 3 | Munzing Chemie | LUBA-print 246/D 3 is a white EVA-copolymer wax dispersion additive for paints and printing inks. It is used in metallic-paints (base-coats) to improve thixotropy and fixation, and to improve the slip property. | |
| LUBA-print 246/D 8 | Munzing Chemie | LUBA-print 246/D 8 is a white EVA-copolymer wax dispersion additive for paints and printing inks. It is used in metallic-paints (base-coats) to improve thixotropy and fixation. | |
| LUBA-print 254/A-PM (ND) | Munzing Chemie | LUBA-print 254/A-PM (ND) is a light yellowish carnauba wax dispersion additive for paints and printing inks. It is used in can and coil coating to improve slip property and mar resistance. | |
| LUBA-print 255/B | Munzing Chemie | LUBA-print 255/B is a light yellow carnauba wax dispersion additive for paints and printing inks. It is used in solvent-based and aqueous lacquers for can and coil coatings to improve slip property and mar resistance. | |
| LUBA-print 266/D | Munzing Chemie | LUBA-print 266/D is a grey PTFE wax dispersion additive for paints and printing inks. It is used in aqueous and solvent-based lacquers to improve rub resistance, abrasion and slip property. | |
| LUBA-print 280/F | Munzing Chemie | LUBA-print 280/F is a white hydrocarbon combination wax dispersion additive for paints and printing inks. It is used in water-based lacquers and coating systems to improve slip behavior and hydrophoby. | |
| LUBA-print 3036 A | Munzing Chemie | LUBA-print 3036 A is a white polyethylene wax dispersion additive for paints and printing inks. It is used in solvent-based and aqueous gravure and flexo printing inks to improve rub resistance. In solvent-based and aqueous lacquer systems it is used to i...展開 LUBA-print 3036 A is a white polyethylene wax dispersion additive for paints and printing inks. It is used in solvent-based and aqueous gravure and flexo printing inks to improve rub resistance. In solvent-based and aqueous lacquer systems it is used to improve mar resistance. 收起 | |
| LUBA-print 309/C | Munzing Chemie | LUBA-print 309/C is a white polyethylene wax dispersion additive for paints and printing inks. It is used in UV-lacquer systems to improve mar resistance. In UV-printing inks it is used to improve rub resistance. | |
| LUBA-print 338 | Munzing Chemie | LUBA-print 338 is a white polyethylene wax dispersion additive for paints and printing inks. It is used for aqueous paint-systems to improve slip and mar resistance. In aqueous flexo printing inks it is used to improve rub resistance. | |
| LUBA-print 346/F | Munzing Chemie | LUBA-print 346/F is a white EVA-copolymer wax dispersion additive for paints and printing inks. It is used for lacquers and glazes to reduce settling property, to improve slip property. | |
| LUBA-print 351/G | Munzing Chemie | LUBA-print 351/G is a light yellowish functional blend wax dispersion additive for paints and printing inks. It is used for solvent based lacquers for high gloss can and coil coatings to improve slip and mar resistance with less porosity. | |
| LUBA-print 351/M | Munzing Chemie | LUBA-print 351/M is a light yellowish carnauba wax dispersion additive for paints and printing inks. It is used in solvent based and aqueous lacquers for can and coil coatings, to improve slip property and mar resistance. | |
| LUBA-print 434/F | Munzing Chemie | LUBA-print 434/F is a yellow-brown carnauba wax dispersion additive for paint and printing inks. It is used in water-based lacquers and coating systems, to improve slip properties. | |
| LUBA-print 436 (ND) | Munzing Chemie | LUBA-print 436 (ND) is a white synthetic wax dispersion additive for paints and printing inks. It can be used in can and coil coatings to improve slip property and scratch resistance. | |
| LUBA-print 447/A (ND) | Munzing Chemie | LUBA-print 447/A (ND) is a light yellow polyethylene/carnauba wax dispersion additive for paints and printing inks. It is used in can and coil coatings to improve the slip property and mar resistance. | |
| LUBA-print 459 | Munzing Chemie | LUBA-print 459 is a white paraffine combination wax dispersion additive for paints and printing inks. It is used in solvent-based lacquers to improve hydrophoby and anti-blocking. | |
| LUBA-print 459/H-2 | Munzing Chemie | LUBA-print 459/H-2 is a white paraffin combination wax dispersion additive for paints and printing inks. It can be used in waterproofing of surfaces, to improve the depth of colour from marbling effects and smoothing technique (stucco). | |
| LUBA-print 459/Z | Munzing Chemie | LUBA-print 459/Z is a whitish paraffin combination wax dispersion additive for paints and printing inks. It is used in waterproofing of surfaces, to improve the depth of colour from marbling effects and smoothing technique (stucco). | |
| LUBA-print 499 | Munzing Chemie | LUBA-print 499 is a yellowish-white wax dispersion additive for paints and printing inks. It is used in aqueous lacquer systems to improve the slip property and mar resistance. In aqueous printing inks, it is used to improve the rub resistance. | |
| LUBA-print 501/M | Munzing Chemie | LUBA-print 501/M is an opaque polyethylene wax dispersion additive for paints and printing inks. It is used in solvent-based and aqueous lacquers for can coatings to improve scratch resistance and slip property. | |
| LUBA-print 501/S (ND) | Munzing Chemie | LUBA-print 501/S (ND) is an opaque polyethylene wax dispersion additive for paints and printing inks. It is used in can coatings to improve scratch resistance and slip property. | |
| LUBA-print 501/S-100 | Munzing Chemie | LUBA-print 501/S-100 is an opaque polyethylene wax dispersion additive for paints and printing inks. It is used in can coatings and industrial lacquers to improve scratch resistance and slip property. | |
| LUBA-print 501/XB | Munzing Chemie | LUBA-print 501/XB is an opaque polyethylene wax dispersion additive for paints and printing inks. It is used in industrial lacquers to improve the slip property. In wood lacquers, it is used to improve scratch resistance and to reduce sedimentation. | |
| LUBA-print 502 | Munzing Chemie | LUBA-print 502 is a yellowish-white PE/PTFE wax dispersion additive for paints and printing inks. It is used in water and solvent-based can and coil coatings to improve slip and scratch resistance. | |
| LUBA-print 539 | Munzing Chemie | LUBA-print 539 is a white functional blend wax dispersion additive for paints and printing inks. It is used in water repellent impregnation and anti-graffiti. | |
| LUBA-print 5500 | Munzing Chemie | LUBA-print 5500 is a white polyethylene wax dispersion additive for paints and printing inks. It is used in aqueous lacquer systems to improve slip property and mar resistance. In aqueous printing inks, it is used to improve the rub resistance. | |
| LUBA-print 551/2 | Munzing Chemie | LUBA-print 551/2 is a white polyethylene wax dispersion additive for paints and printing inks. It is used in aqueous lacquers and printing inks to improve the rub resistance. | |
| LUBA-print 552/D | Munzing Chemie | LUBA-print 552/D is a white non-ionic wax dispersion additive for paint and printing inks. It is used in aqueous lacquers to improve matting and abrasion resistance. | |
| LUBA-print 582/E | Munzing Chemie | LUBA-print 582/E is a white functional blend additive for paints and printing inks. It is used in wood coatings to reduce metal-marking. | |
| LUBA-print 644/D | Munzing Chemie | LUBA-print 644/D is a light yellowish natural wax dispersion additive for paints and printing inks. It is used to improve the water resistance of soft wood, antique wax effect. | |
| LUBA-print 645 | Munzing Chemie | LUBA-print 645 is a white polymer combination wax dispersion additive for paints and printing inks. It is used in aqueous lacquers to improve matting and abrasion resistance. | |
| LUBA-print 645/A | Munzing Chemie | LUBA-print 645/A is a white non-ionic wax dispersion additive for paints and printing inks. It is used aqueous lacquers to improve matting and abrasion resistance. | |
| LUBA-print 650/C | Munzing Chemie | LUBA-print 650/C is a white polyethylene-wax dispersion additive for solvent-based and aqueous inks and lacquer systems. It is used in gravure and flexoprinting inks for paper and foil printing to improve rub resistance and as a slip agent. It is used in ...展開 LUBA-print 650/C is a white polyethylene-wax dispersion additive for solvent-based and aqueous inks and lacquer systems. It is used in gravure and flexoprinting inks for paper and foil printing to improve rub resistance and as a slip agent. It is used in lacquer systems to improve mar resistance. 收起 | |
| LUBA-print 654/DF 2 | Munzing Chemie | LUBA-print 654/DF 2 is a white polyethylene-wax dispersion additive for solvent-based and aqueous inks and lacquer systems. It is used in gravure and flexoprinting inks for paper and foil printing to improve rub resistance and as a slip agent. It is used ...展開 LUBA-print 654/DF 2 is a white polyethylene-wax dispersion additive for solvent-based and aqueous inks and lacquer systems. It is used in gravure and flexoprinting inks for paper and foil printing to improve rub resistance and as a slip agent. It is used in lacquer systems to improve mar resistance. 收起 | |
| LUBA-print 660 | Munzing Chemie | LUBA-print 660 is a white polyethylene-wax dispersion additive for can and coil coatings. It is used in can and coil coatings to improve slip properties and provide scratch resistance. | |
| LUBA-print 693/D | Munzing Chemie | LUBA-print 693/D is a yellow-light brown functional blend dispersion additive for water and solvent-based can and coil-coatings. It is used in water and solvent-based can and coil-coatings to reach high gloss surfaces as a slip agent and as a good abrasio...展開 LUBA-print 693/D is a yellow-light brown functional blend dispersion additive for water and solvent-based can and coil-coatings. It is used in water and solvent-based can and coil-coatings to reach high gloss surfaces as a slip agent and as a good abrasion resister. 收起 | |
| LUBA-print 693/M | Munzing Chemie | LUBA-print 693/M is a yellow functional blend dispersion additive for solvent-based can and coil-coatings. It is used in solvent-based can and coil-coatings to reach high gloss surfaces as a slip agent and as a good abrasion resister. | |
| LUBA-print 706/F | Munzing Chemie | LUBA-print 706/F is a white butyl acetate wax dispersion additive for wood lacquers. It is used in wood lacquers to improve matting and scratch resistance. | |
| LUBA-print 715/A | Munzing Chemie | LUBA-print 715/A is a white EAA copolymer wax dispersion additive for industrial and metallic paints. It is used in industrial paints to improve slip property. It is used in metallic paints to improve thixotropy and fixation. | |
| LUBA-print 749 | Munzing Chemie | LUBA-print 749 is a yellowish-whit amid wax dispersion for paints and printing inks. It is used in solvent-based lacquer systems to improve mar resistance. It is also used in meat-release coatings. |
