| EBECRYL® 88 | Allnex | EBECRYL® 88 is an amine modified polyether acrylate that exhibits low viscosity and fast cure via exposure to ultraviolet light (UV). Films of EBECRYL® 88 cured by UV or electron beam (EB) demonstrate high gloss, solvent resistance and low residual odor. ...展開 EBECRYL® 88 is an amine modified polyether acrylate that exhibits low viscosity and fast cure via exposure to ultraviolet light (UV). Films of EBECRYL® 88 cured by UV or electron beam (EB) demonstrate high gloss, solvent resistance and low residual odor. EBECRYL® 88 is especially suited to applications requiring low viscosity and fast UV cure, including overprint varnishes and flexographic inks. 收起 | Request Sample |
| EBECRYL® 880 | Allnex | EBECRYL® 880 is a clear liquid low viscous amine modified multifunctional acrylated polyether oligomer generally used as main oligomer in low viscous clear formulations. It has been developed specially for applications where high gloss, fast cure response...展開 EBECRYL® 880 is a clear liquid low viscous amine modified multifunctional acrylated polyether oligomer generally used as main oligomer in low viscous clear formulations. It has been developed specially for applications where high gloss, fast cure response and a low viscosity (spray) by radiation are desired. It is recommended for use in: clear coatings on paper, wood, plastics, top coats for wood, high gloss coatings, and flexo inks and varnishes. 收起 | Request Sample |
| EBECRYL® 8804/10 EA | Allnex | EBECRYL 8804-10EA is the aliphatic urethane diacrylate EBECRYL 8804 blended with 10% by weight ethyl acetate for reduced viscosity. Films of EBECRYL 8804 cured by ultraviolet light (UV) or electron beam (EB) exhibit excellent abrasion resistance, toughne...展開 EBECRYL 8804-10EA is the aliphatic urethane diacrylate EBECRYL 8804 blended with 10% by weight ethyl acetate for reduced viscosity. Films of EBECRYL 8804 cured by ultraviolet light (UV) or electron beam (EB) exhibit excellent abrasion resistance, toughness and flexibility, and are resistant to yellowing. 收起 | Request Sample |
| EBECRYL® 8807 | Allnex | EBECRYL® 8807 is an aliphatic urethane diacrylate that exhibits rapid surface cure response, light color and moderate viscosity. Films cured by UV/EB light exhibit good flexibility, toughness, abrasion resistance, and are resistant to yellowing. It is rec...展開 EBECRYL® 8807 is an aliphatic urethane diacrylate that exhibits rapid surface cure response, light color and moderate viscosity. Films cured by UV/EB light exhibit good flexibility, toughness, abrasion resistance, and are resistant to yellowing. It is recommended for use in: coatings for wood, cement and composite flooring, adhesives or sealants cured with low intensity lamps, and flexible coatings requiring rapid cure in air. 收起 | Request Sample |
| EBECRYL® 8808 | Allnex | EBECRYL® 8808 is an undiluted aliphatic urethane diacrylate. Since the oligomer is undiluted, more formulating latitude is possible. Films of EBECRYL® 8808 cured by ultraviolet light (UV) or electron beam (EB) exhibit excellent exterior durability, toughn...展開 EBECRYL® 8808 is an undiluted aliphatic urethane diacrylate. Since the oligomer is undiluted, more formulating latitude is possible. Films of EBECRYL® 8808 cured by ultraviolet light (UV) or electron beam (EB) exhibit excellent exterior durability, toughness, and resistance to yellowing. It is recommended for use in: screen inks and coatings on various substrates, non-yellowing, exterior durable coatings, and coatings for wood and plastics. 收起 | Request Sample |
| EBECRYL® 8809 | Allnex | EBECRYL® 8809 is a difunctional aliphatic urethane acrylate that does not contain any intentionally added organic tin compounds, heavy metals*, hydroquinone (HQ) or methyl ether of hydroquinone (MEHQ). Films of EBECRYL® 8809 cured by ultraviolet light (UV...展開 EBECRYL® 8809 is a difunctional aliphatic urethane acrylate that does not contain any intentionally added organic tin compounds, heavy metals*, hydroquinone (HQ) or methyl ether of hydroquinone (MEHQ). Films of EBECRYL® 8809 cured by ultraviolet light (UV) or electron beam (EB) exhibit excellent exterior durability, toughness, and resistance to yellowing. 收起 | Request Sample |
| EBECRYL® 8810 | Allnex | EBECRYL® 8810 is a difunctional aliphatic urethane acrylate that does not contain any intentionally added organic tin compounds, heavy metals*, hydroquinone (HQ) or methyl ether of hydroquinone (MEHQ). (Please note that quinones are present in many raw ma...展開 EBECRYL® 8810 is a difunctional aliphatic urethane acrylate that does not contain any intentionally added organic tin compounds, heavy metals*, hydroquinone (HQ) or methyl ether of hydroquinone (MEHQ). (Please note that quinones are present in many raw materials, so the overall quinone content is reduced, but not zero in EBECRYL® 8810.) EBECRYL® 8810 is a high viscosity liquid at room temperature and is light in color. Films of EBECRYL® 8810 cured by ultraviolet light (UV) or electron beam (EB) exhibit excellent abrasion resistance, toughness and flexibility, and are resistant to yellowing. 收起 | Request Sample |
| EBECRYL® 8811 | Allnex | EBECRYL® 8811 is a difunctional aliphatic urethane acrylate that does not contain any intentionally added organic tin compounds, heavy metals*, hydroquinone (HQ) or methyl ether of hydroquinone (MEHQ). (Please note that quinones are present in many raw ma...展開 EBECRYL® 8811 is a difunctional aliphatic urethane acrylate that does not contain any intentionally added organic tin compounds, heavy metals*, hydroquinone (HQ) or methyl ether of hydroquinone (MEHQ). (Please note that quinones are present in many raw materials, so the overall quinone content is reduced, but not zero in EBECRYL® 8811.) EBECRYL® 8811 exhibits rapid surface cure response in both low and high energy cure systems. It is especially recommended for use in UV LED and UVA curing in order to obtain good surface cure. Films of EBECRYL® 8811 cured by ultraviolet light (UV) or electron beam (EB) exhibit good flexibility, toughness, abrasion resistance, and are resistant to yellowing. 收起 | Request Sample |
| EBECRYL® 884 | Allnex | EBECRYL® 884 is an undiluted polyesteracrylate resin. Films of EBECRYL® 884 cured by ultraviolet light (UV) or electron beam (EB) exhibits high flexibility and excellent abrasion resistance. It is recommended for use in: parquet floor applications, furnit...展開 EBECRYL® 884 is an undiluted polyesteracrylate resin. Films of EBECRYL® 884 cured by ultraviolet light (UV) or electron beam (EB) exhibits high flexibility and excellent abrasion resistance. It is recommended for use in: parquet floor applications, furniture coatings, plastic coatings, and resilient flooring. 收起 | Request Sample |
| EBECRYL® 888 | Allnex | EBECRYL® 888 is a low viscosity polyester acrylate designed for use in UV/EB primer coatings to provide ink receptivity and prevent plasticizer migration. Films containing EBECRYL 888 which are cured by ultraviolet light (UV) or electron beam (EB) exhibit...展開 EBECRYL® 888 is a low viscosity polyester acrylate designed for use in UV/EB primer coatings to provide ink receptivity and prevent plasticizer migration. Films containing EBECRYL 888 which are cured by ultraviolet light (UV) or electron beam (EB) exhibit good adhesion, good abrasion and high flexibility. EBECRYL 888 is recommended for use in flexographic or gravure primer coatings printed on polyester, plasticized PVC and uncoated films. 收起 | Request Sample |
| EBECRYL® 8894 | Allnex | EBECRYL® 8894 is an aliphatic urethane acrylate, diluted in butyl acetate, designed for applications requiring high humidity and abrasion resistance. Films of EBECRYL®8894 cured via exposure to ultraviolet light (UV) or electron beam (EB) exhibit excellen...展開 EBECRYL® 8894 is an aliphatic urethane acrylate, diluted in butyl acetate, designed for applications requiring high humidity and abrasion resistance. Films of EBECRYL®8894 cured via exposure to ultraviolet light (UV) or electron beam (EB) exhibit excellent exterior durability, good toughness and flexibility, as well as the non-yellowing properties typical of an aliphatic urethane. 收起 | Request Sample |
| EBECRYL® 8896 | Allnex | EBECRYL® 8896 is a revolutionary aliphatic urethane acrylate designed for application(s) requiring haptic properties (e.g. “soft touch/feel”). Films of EBECRYL®8896 cured via exposure to ultraviolet light (UV) or electron beam (EB) are tough, flexible, an...展開 EBECRYL® 8896 is a revolutionary aliphatic urethane acrylate designed for application(s) requiring haptic properties (e.g. “soft touch/feel”). Films of EBECRYL®8896 cured via exposure to ultraviolet light (UV) or electron beam (EB) are tough, flexible, and resistant to yellowing. EBECRYL®8896 is compatible with variety of fillers, pigments, waxes, and polymeric beads allowing formulator maximum formulating latitude to create a number of haptic properties ranging from a velvety/silky feel to EBECRYL®8896’s intrinsic rubbery feel. 收起 | Request Sample |
| EBECRYL® 892 | Allnex | EBECRYL® 892 is a light colour, low viscosity tetra-functional acrylated oligomer. It also improves the hardness and solvent resistance of cured inks and coatings. EBECRYL® 892 is particularly useful for lithographic offset inks, flexo inks and overprint ...展開 EBECRYL® 892 is a light colour, low viscosity tetra-functional acrylated oligomer. It also improves the hardness and solvent resistance of cured inks and coatings. EBECRYL® 892 is particularly useful for lithographic offset inks, flexo inks and overprint varnishes. 收起 | Request Sample |
| EBECRYL® 893 | Allnex | EBECRYL® 893是一款專門為UV固化領域開發的改性聚酯丙烯酸酯，可應用於混凝土及乙烯基樹脂複合瓷磚（VCT）地坪塗料。EBECRYL® 893的低粘度也為實現施工所需低粘度配方提供了餘地。它推薦用於UV固化領域，用於混凝土和VCT塗料。 | Request Sample |
| EBECRYL® 895 | Allnex | Ebecryl® 895 is a multifunctional monomer which polymerizes when exposed to sources of free radicals. It is composed primarily of the pentaacrylate and hexaacrylate esters of dipentaerythritol. Ebecryl® 895 is particularly useful in UV (ultraviolet) and E...展開 Ebecryl® 895 is a multifunctional monomer which polymerizes when exposed to sources of free radicals. It is composed primarily of the pentaacrylate and hexaacrylate esters of dipentaerythritol. Ebecryl® 895 is particularly useful in UV (ultraviolet) and EB (electron beam) curable inks and coatings where improved cure response, hardness and scratch/abrasion resistance are required. 收起 | Request Sample |
| EBECRYL® 896 | Allnex | EBECRYL® 896 is a multifunctional monomer which polymerizes when exposed to sources of free radicals. It is a low viscosity DPHA composed primarily of pentaacrylate and hexaacrylate esters of dipentaerythritol. It is particularly useful in UV/EB inks and ...展開 EBECRYL® 896 is a multifunctional monomer which polymerizes when exposed to sources of free radicals. It is a low viscosity DPHA composed primarily of pentaacrylate and hexaacrylate esters of dipentaerythritol. It is particularly useful in UV/EB inks and coatings where improved cure response, hardness and scratch/abrasion resistance are required. 收起 | Request Sample |
| EBECRYL® 898 | Allnex | EBECRYL® 898 is a special purpose, 100% solids tetra functional polyester acrylate that extends the matting effect of a silica containing formulation. It is characterized by extended matting effect, low viscosity, low odour, and fast cure. This product is...展開 EBECRYL® 898 is a special purpose, 100% solids tetra functional polyester acrylate that extends the matting effect of a silica containing formulation. It is characterized by extended matting effect, low viscosity, low odour, and fast cure. This product is recommended for wood and plastic coatings, paper upgrading, flexographic inks, and EB cured paper-foil coatings. 收起 | Request Sample |
| EBECRYL® IBOA | Allnex | EBECRYL® IBOA, Isobornyl acrylate, is a high purity, low colour monofunctional diluent monomer which polymerizes when exposed to sources of free radicals. It is a diluent compatible with a wide range of acrylated oligomers used in UV/EB curing application...展開 EBECRYL® IBOA, Isobornyl acrylate, is a high purity, low colour monofunctional diluent monomer which polymerizes when exposed to sources of free radicals. It is a diluent compatible with a wide range of acrylated oligomers used in UV/EB curing applications. Good viscosity reduction and low shrinkage properties make this product useful in a variety of overprint varnishes, inks, and coatings. 收起 | Request Sample |
| EBECRYL® IBOMA | Allnex | EBECRYL® IBOMA (isobornyl methacrylate) is a mono-functional monomer which polymerizes when exposed to sources of free radicals. EBECRYL® IBOMA forms homopolymers and copolymers. EBECRYL® IBOMA is compatible with a wide range of acrylated- and methacrylat...展開 EBECRYL® IBOMA (isobornyl methacrylate) is a mono-functional monomer which polymerizes when exposed to sources of free radicals. EBECRYL® IBOMA forms homopolymers and copolymers. EBECRYL® IBOMA is compatible with a wide range of acrylated- and methacrylated resins. 收起 | Request Sample |
| EBECRYL® LED 02 | Allnex | EBECRYL® LED 02, a mercapto modified polyester acrylate resin, can be added as a co-resin to UV curable formulations. EBECRYL® LED 02 transforms formulations into UV LED, UVA, or low energy curable systems by providing better surface cure. In addition, th...展開 EBECRYL® LED 02, a mercapto modified polyester acrylate resin, can be added as a co-resin to UV curable formulations. EBECRYL® LED 02 transforms formulations into UV LED, UVA, or low energy curable systems by providing better surface cure. In addition, this co-resin can also be used to obtain better surface cure in high energy cure formulations. EBECRYL® LED 02 provides better surface cure by mitigating oxygen inhibition of the free radical process. 收起 | Request Sample |
| EBECRYL® LED 03 | Allnex | EBECRYL® LED 03 is a low viscosity amine modified polyether acrylate oligomer that can be added as a co‐resin to UV curable formulations. EBECRYL® LED 03 – when combined with an appropriate photoinitiator system – transforms formulations into UV LED, UVA,...展開 EBECRYL® LED 03 is a low viscosity amine modified polyether acrylate oligomer that can be added as a co‐resin to UV curable formulations. EBECRYL® LED 03 – when combined with an appropriate photoinitiator system – transforms formulations into UV LED, UVA, or low energy curable systems by providing improved surface cure. In addition, this effect is also seen in high energy cure formulations. The improved surface cure is obtained by mitigating oxygen inhibition of the free radical process and/or by being an amine synergist for Norrish type II photoinitiators. 收起 | Request Sample |
| EBECRYL® LED 04 | Allnex | EBECRYL® LED 04 is an acrylated polyamine that can be added as a co-resin to UV curable formulations. EBECRYL® LED 04 – when combined with an appropriate photo initiator system – transforms formulations into UV LED, UVA, or low energy curable systems by p...展開 EBECRYL® LED 04 is an acrylated polyamine that can be added as a co-resin to UV curable formulations. EBECRYL® LED 04 – when combined with an appropriate photo initiator system – transforms formulations into UV LED, UVA, or low energy curable systems by providing improved surface cure. In addition, this effect is also seen in high energy cure formulations. The improved surface cure is obtained by mitigating oxygen inhibition of the free radical process and/or by being an amine synergist for Norrish type II photo initiators. Coating and inks based on EBECRYL® LED 04 exhibit a low odor after UV or EB curing. Due to its hydrophobic nature EBECRYL® LED 04 can also be used in offset inks applications as a replacement of aminobenzoate synergists. 收起 | Request Sample |
| EBECRYL® LED 05 | Allnex | EBECRYL® LED 05 is an acrylated polyamine that can be added as a co-resin to UV curable formulations. EBECRYL® LED 05 – when combined with an appropriate photo initiator system – transforms formulations into UV LED, UVA, or low energy curable systems by...展開 EBECRYL® LED 05 is an acrylated polyamine that can be added as a co-resin to UV curable formulations. EBECRYL® LED 05 – when combined with an appropriate photo initiator system – transforms formulations into UV LED, UVA, or low energy curable systems by providing improved surface cure. In addition, this effect is also seen in high energy cure formulations. The improved surface cure is obtained by mitigating oxygen inhibition of the free radical process and/or by being an amine synergist for Norrish type II photo initiators. Coating and inks based on EBECRYL® LED 05 exhibit a low odor after UV or EB curing. Due to its unique structure EBECRYL® LED 05 based flexo inks have improved ink flow stability due to better compatibility with organic pigments. 收起 | Request Sample |
| EBECRYL® LEO 10101 | Allnex | EBECRYL® LEO 10101 is a self-curing multifunctional acrylate enabling the UV curing of printing inks and coatings, not requiring additional photoinitiator, which reduces the risk of migration in indirect food contact applications. It is specifically devel...展開 EBECRYL® LEO 10101 is a self-curing multifunctional acrylate enabling the UV curing of printing inks and coatings, not requiring additional photoinitiator, which reduces the risk of migration in indirect food contact applications. It is specifically developed for making high reactive nicely flowing low migration Flexo inks. This product can be used for different colours, also for white. It is recommended to use 20-30% EBECRYL® LEO 10101 in an ink or coating to reach a correct surface and through cure. 收起 | Request Sample |
| EBECRYL® LEO 10103 | Allnex | EBECRYL® LEO 10103 is a multifunctional acrylate that in the presence of an amine synergist can enable the UV curing of printing inks and coatings without, or with only a minimal amount, of photoinitiator. The elimination or reduction of photoinitiator de...展開 EBECRYL® LEO 10103 is a multifunctional acrylate that in the presence of an amine synergist can enable the UV curing of printing inks and coatings without, or with only a minimal amount, of photoinitiator. The elimination or reduction of photoinitiator decreases the potential for migration in indirect food contact applications. EBECRYL® LEO 10103 can be used for low migration over print varnishes along with flexographic and offset inks in the entire colour range, including white. EBECRYL® LEO 10103 at 10-20% by weight in a coating or ink can provide a good balance of surface and through cure. 收起 | Request Sample |
| EBECRYL® LEO 10501 | Allnex | EBECRYL® LEO 10501 is a trifunctional diluting oligomer that provides low extractables, low odor and low migration after UV or EB curing. It is compatible with a wide range of acrylated resins. It can be used to produce low odor and low migrating UV overp...展開 EBECRYL® LEO 10501 is a trifunctional diluting oligomer that provides low extractables, low odor and low migration after UV or EB curing. It is compatible with a wide range of acrylated resins. It can be used to produce low odor and low migrating UV overprint varnishes (OPV’s) and inks for indirect food contact applications. EBECRYL® LEO 10501 is specially recommended to formulate low extractable and low odor UV/EB curable OPV’s and inks for flexography, lithography and screen applications. 收起 | Request Sample |
| EBECRYL® LEO 10502 | Allnex | EBECRYL® LEO 10502 is a low viscosity polymeric tetrafunctional polyether acrylate that provides low extractables, low odor and low migration after UV or EB curing. It is recommended for use in low odor and low migrating UV/EB curable overprint varnishes ...展開 EBECRYL® LEO 10502 is a low viscosity polymeric tetrafunctional polyether acrylate that provides low extractables, low odor and low migration after UV or EB curing. It is recommended for use in low odor and low migrating UV/EB curable overprint varnishes (OPV’s) and inks. 收起 | Request Sample |
| EBECRYL® LEO 10551 | Allnex | EBECRYL® LEO 10551 is a low viscosity amine modified polyether acrylate oligomer that provides low extractables, low odor and low migration after UV or EB curing. It is recommended for use in low odor and low migrating UV overprint varnishes (OPV’s) and i...展開 EBECRYL® LEO 10551 is a low viscosity amine modified polyether acrylate oligomer that provides low extractables, low odor and low migration after UV or EB curing. It is recommended for use in low odor and low migrating UV overprint varnishes (OPV’s) and inks for indirect food packaging applications. 收起 | Request Sample |
| EBECRYL® LEO 10552 | Allnex | EBECRYL® LEO 10552 is a low viscosity amine modified polyether acrylate oligomer that provides low extractables, low odor and low migration after UV or EB curing. It is recommended for use in low odor and low migrating UV overprint varnishes (OPV’s) and i...展開 EBECRYL® LEO 10552 is a low viscosity amine modified polyether acrylate oligomer that provides low extractables, low odor and low migration after UV or EB curing. It is recommended for use in low odor and low migrating UV overprint varnishes (OPV’s) and inks for indirect food packaging applications. 收起 | Request Sample |
| EBECRYL® LEO 10553 | Allnex | EBECRYL® LEO 10553 is a low viscosity polymeric amine modified polyether acrylate that provides low extractables, low odor and low migration and after UV or EB curing. It is recommended for use in low odor and low migrating UV overprint varnishes (OPV’s) ...展開 EBECRYL® LEO 10553 is a low viscosity polymeric amine modified polyether acrylate that provides low extractables, low odor and low migration and after UV or EB curing. It is recommended for use in low odor and low migrating UV overprint varnishes (OPV’s) and inks for indirect food packaging applications. 收起 | Request Sample |
| EBECRYL® LEO 10601 | Allnex | EBECRYL® LEO 10601 is a modified epoxy acrylate that provides low extractables and low odor after UV or EB curing. It exhibits good pigment wetting properties and produces UV offset inks exhibiting enhanced ink- water balance and low misting. It may also ...展開 EBECRYL® LEO 10601 is a modified epoxy acrylate that provides low extractables and low odor after UV or EB curing. It exhibits good pigment wetting properties and produces UV offset inks exhibiting enhanced ink- water balance and low misting. It may also be used to produce UV flexo inks with good flow, high gloss and high reactivity. It is also suitable for screen and gravure application and OPV. 收起 | Request Sample |
| EBECRYL® LEO 10801 | Allnex | EBECRYL® LEO 10801 is a hexafunctional polyester acrylate oligomer that provides high reactivity and the proper ink-water balance necessary for good lithographic printing. Lithographic inks based on EBECRYL® LEO 10801 display excellent rheological propert...展開 EBECRYL® LEO 10801 is a hexafunctional polyester acrylate oligomer that provides high reactivity and the proper ink-water balance necessary for good lithographic printing. Lithographic inks based on EBECRYL® LEO 10801 display excellent rheological properties ensuring good ink transfer from the printing plate to the blanket and then to the substrate, combined with good dot definition. It is recommended for use in: lithographic and flexographic inks, offset OPV, and inks and coatings for indirect food packaging and related applications. 收起 | Request Sample |
| EBECRYL® MPDDA | Allnex | EBECRYL® MPDDA is a difunctional monomer which polymerizes when exposed to sources of free radicals. This difunctional acrylated monomer is particularly useful in inks and coatings where improved elasticity, weathering and adhesion are desired in combinat...展開 EBECRYL® MPDDA is a difunctional monomer which polymerizes when exposed to sources of free radicals. This difunctional acrylated monomer is particularly useful in inks and coatings where improved elasticity, weathering and adhesion are desired in combination with an excellent water resistance. 收起 | Request Sample |
| EBECRYL® P115 | Allnex | EBECRYL® P115 is a copolymerizable amine used as a hydrogen donor, or photoactivator, in ultraviolet light (UV) curable coatings and inks. When used in formulations in combination with a photosensitizer (e.g. ADDITOL® BP), EBECRYL® P115 provides rapid UV ...展開 EBECRYL® P115 is a copolymerizable amine used as a hydrogen donor, or photoactivator, in ultraviolet light (UV) curable coatings and inks. When used in formulations in combination with a photosensitizer (e.g. ADDITOL® BP), EBECRYL® P115 provides rapid UV cure response in air by mitigating the effects of oxygen inhibition at the coating or ink surface. It has recommended levels are from 5 to 15% based on the total formulation, usually combined with 3-5% photosensitizer. EBECRYL® P115 is recommended as a reactive co-initiator in the following applications: overprint varnishes, screen and flexo inks, wood topcoats, clear coatings on paper and plastics, and pigmented coatings. 收起 | Request Sample |
| EBECRYL® P116 | Allnex | EBECRYL® P 116 is a reactive amine additive used in place of more volatile amine synergists to increase the cure speed of ultraviolet (UV) cured coatings. When EBECRYL® P 116 is used in combination with other photoinitiators an increase in cure speed, esp...展開 EBECRYL® P 116 is a reactive amine additive used in place of more volatile amine synergists to increase the cure speed of ultraviolet (UV) cured coatings. When EBECRYL® P 116 is used in combination with other photoinitiators an increase in cure speed, especially at the surface, can be realized. It is recommended for use in: overprint varnishes, wood fillers and top coats, and clear coatings on paper and plastics. 收起 | Request Sample |
| EBECRYL® P39 | Allnex | EBECRYL® P39 is a polymeric benzophenone derivative diluted with 25% of EBECRYL® LEO 10501 that functions as the photosensitizer in hydrogen abstraction type radical photoinitiator systems. EBECRYL® P39 has been designed for use in the formulation of UV c...展開 EBECRYL® P39 is a polymeric benzophenone derivative diluted with 25% of EBECRYL® LEO 10501 that functions as the photosensitizer in hydrogen abstraction type radical photoinitiator systems. EBECRYL® P39 has been designed for use in the formulation of UV coatings that exhibit little or no odor after curing. It has recommended levels are from 8 to 10% based on total formulation. It should be used in combination with amine co-initiators such as EBECRYL® P115 or EBECRYL® 7100. EBECRYL® P39 is recommended for use in over print varnishes where low residual odor is required. 收起 | Request Sample |
| EBECRYL® TMPTMA | Allnex | EBECRYL® TMPTMA, CAS No. 3290-92-4, is a trifunctional monomer which polymerizes when exposed to sources of free radicals. EBECRYL® TMPTMA forms homopolymers and copolymers. EBECRYL® TMPTMA is compatible with a wide range of acrylated- and methacrylated r...展開 EBECRYL® TMPTMA, CAS No. 3290-92-4, is a trifunctional monomer which polymerizes when exposed to sources of free radicals. EBECRYL® TMPTMA forms homopolymers and copolymers. EBECRYL® TMPTMA is compatible with a wide range of acrylated- and methacrylated resins. 收起 | Request Sample |
| ECR Glass Flake GF001 | Glassflake Ltd | ECR Glass Flake GF001 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.0 - 1.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties a...展開 ECR Glass Flake GF001 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.0 - 1.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF002 | Glassflake Ltd | ECR Glass Flake GF002 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.3 - 2.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties a...展開 ECR Glass Flake GF002 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.3 - 2.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF003 | Glassflake Ltd | ECR Glass Flake GF003 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 2.3 - 3.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties a...展開 ECR Glass Flake GF003 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 2.3 - 3.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF005 | Glassflake Ltd | ECR Glass Flake GF005 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 3.5 - 5.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties ...展開 ECR Glass Flake GF005 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 3.5 - 5.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF007 | Glassflake Ltd | ECR Glass Flake GF007 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 5.5 - 9.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties a...展開 ECR Glass Flake GF007 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 5.5 - 9.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF100M (Milled) | Glassflake Ltd | ECR Glass Flake GF100M (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.0 - 1.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pr...展開 ECR Glass Flake GF100M (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.0 - 1.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF100M (Unmilled) | Glassflake Ltd | ECR Glass Flake GF100 (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.0 - 1.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier p...展開 ECR Glass Flake GF100 (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.0 - 1.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF100nm (Unmilled) | Glassflake Ltd | ECR Glass Flake GF100nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.100nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pr...展開 ECR Glass Flake GF100nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.100nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF100nmM (Milled) | Glassflake Ltd | ECR Glass Flake GF100nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.100nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pro...展開 ECR Glass Flake GF100nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.100nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF350nm (Unmilled) | Glassflake Ltd | ECR Glass Flake GF350nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.350nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pr...展開 ECR Glass Flake GF350nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.350nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF350nmM (Milled) | Glassflake Ltd | ECR Glass Flake GF350nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.350nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pro...展開 ECR Glass Flake GF350nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.350nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF500M (Milled) | Glassflake Ltd | ECR Glass Flake GF500M (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 3.5 - 5.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pr...展開 ECR Glass Flake GF500M (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 3.5 - 5.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF500M (Unmilled) | Glassflake Ltd | ECR Glass Flake GF500 (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 3.5 - 5.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier p...展開 ECR Glass Flake GF500 (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 3.5 - 5.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF500nm (Unmilled) | Glassflake Ltd | ECR Glass Flake GF500nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.500nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pr...展開 ECR Glass Flake GF500nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.500nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF500nmM (Milled) | Glassflake Ltd | ECR Glass Flake GF500nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.500nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pro...展開 ECR Glass Flake GF500nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.500nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF750M (Milled) | Glassflake Ltd | ECR Glass Flake GF750 (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 5.5 - 9.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pro...展開 ECR Glass Flake GF750 (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 5.5 - 9.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF750M (Unmilled) | Glassflake Ltd | ECR Glass Flake GF750 (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 5.5 - 9.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier p...展開 ECR Glass Flake GF750 (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 5.5 - 9.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF750nm (Unmilled) | Glassflake Ltd | ECR Glass Flake GF750nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.750nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pr...展開 ECR Glass Flake GF750nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.750nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF750nmM (Milled) | Glassflake Ltd | ECR Glass Flake GF750nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.750nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pro...展開 ECR Glass Flake GF750nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.750nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| EMTEC 5005 | Allnex | Emtec 5005 is a colloid stabilised styrene acrylic emulsion of fine to medium particle size. It exhibits exceptional water resistance and superior adhesion to a wide variety of surfaces. | Request Sample |
| EMTEC 5021 | Allnex | EMTEC™ 5021 is an APE free styrene acrylic emulsion of fine particle size which film forms below its theoretical Tg. It exhibits a faster build-up of water resistance than the acrylics and even more outstanding water resistance and adhesion of the dried f...展開 EMTEC™ 5021 is an APE free styrene acrylic emulsion of fine particle size which film forms below its theoretical Tg. It exhibits a faster build-up of water resistance than the acrylics and even more outstanding water resistance and adhesion of the dried film. 收起 | Request Sample |
| Epoxy Resin SM828 | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | SM828 is an undiluted, clear difunctional bisphenol A/epichlorohydrin derived liquid epoxy resin. It is a widely-used, general purpose liquid epoxy resin. This product is recognized as the standard from which many variations have been developed. It is rec...展開 SM828 is an undiluted, clear difunctional bisphenol A/epichlorohydrin derived liquid epoxy resin. It is a widely-used, general purpose liquid epoxy resin. This product is recognized as the standard from which many variations have been developed. It is recommended for adhesives, marine and protective coatings, can and coil coatings, automotive coatings, and more. 收起 | |
| FY-4902 Silicone Surfactant | Guangzhou Fluorine Reason Silicon Science and Technology Co., Ltd. | FY-4902 Silicone Surfactant appears as a yellowish, transparent liquid. This product is a nonionic surfactant, and is designed to increase wetting, spreading, and dispersion properties. It can be used in inks and coating applications. | |
| FY-4903 Silicon Surfactant | Guangzhou Fluorine Reason Silicon Science and Technology Co., Ltd. | FY-4903 Silicon Surfactant appears as a colorless to yellowish transparent liquid. This product is designed to increase wetting, spreading, and dispersion properties in the end product. It can be used in solvent-based or water-based inks and in coating ...展開 FY-4903 Silicon Surfactant appears as a colorless to yellowish transparent liquid. This product is designed to increase wetting, spreading, and dispersion properties in the end product. It can be used in solvent-based or water-based inks and in coating applications. 收起 | |
| FY-F501 Fluoride Surfactant | Guangzhou Fluorine Reason Silicon Science and Technology Co., Ltd. | FY-F501 Fluoride Surfactant appears as a yellowish, transparent liquid. This product is designed to reduce the surface tension in a liquid, and to increase wetting, dispersion, and levelling, among other properties. It can be used in solvent-based or wa...展開 FY-F501 Fluoride Surfactant appears as a yellowish, transparent liquid. This product is designed to reduce the surface tension in a liquid, and to increase wetting, dispersion, and levelling, among other properties. It can be used in solvent-based or water-based coatings and ink applications. 收起 | |
| FY-F502 Fluoride Surfactant | Guangzhou Fluorine Reason Silicon Science and Technology Co., Ltd. | FY-F502 Fluoride Surfactant appears as a dark yellow transparent liquid. This product is used to reduce the surface tension of liquids and to increase foaming abilities. In particular, it can be used in solvent-based and water-based coatings and inks. | |
| G-CURE™ 17-0105 | Allnex | G-Cure® 17-0105 (formerly G-Cure® 105P70) acrylic resin is designed for high build, higher volume solids acrylic urethane topcoats and primers. It will react at room temperature with aliphatic polyisocyanates to give excellent application properties. Form...展開 G-Cure® 17-0105 (formerly G-Cure® 105P70) acrylic resin is designed for high build, higher volume solids acrylic urethane topcoats and primers. It will react at room temperature with aliphatic polyisocyanates to give excellent application properties. Formulations can be designed for high gloss, lower solvent industrial maintenance coatings. 收起 | Request Sample |
| G-Cure® 17-0807 | Allnex | G-CURE 17-0807 (formerly G-CURE 806PT60) acrylic resin is a hydroxyl functional acrylic copolymer designed to react at room temperature with aliphatic polyisocyanates to produce high performance coatings. Coatings formulated with G-CURE 17-0807 exhibit ou...展開 G-CURE 17-0807 (formerly G-CURE 806PT60) acrylic resin is a hydroxyl functional acrylic copolymer designed to react at room temperature with aliphatic polyisocyanates to produce high performance coatings. Coatings formulated with G-CURE 17-0807 exhibit outstanding durability, chemical resistance and color retention. Coatings produced with G-CURE 17-0807 are suitable for metal, wood and plastic, particularly when heat sensitivity is a concern. 收起 | Request Sample |
| G-CURE™ 17-0870 | Allnex | G-Cure® 17-0870 (formerly G-Cure® 870BLX50) acrylic resin is a hydroxyl functional acrylic resin designed to react at room temperature with aliphatic polyisocyanates to produce high performance coatings. Coatings formulated with G-Cure® 17-0870 have fast ...展開 G-Cure® 17-0870 (formerly G-Cure® 870BLX50) acrylic resin is a hydroxyl functional acrylic resin designed to react at room temperature with aliphatic polyisocyanates to produce high performance coatings. Coatings formulated with G-Cure® 17-0870 have fast lacquer-like dry, but provide long pot life due to controlled reactivity. The cured films exhibit excellent durability and good chemical resistance. 收起 | Request Sample |
| HDDA | Allnex | HDDA (Hexanediol diacrylate) is a difunctional reactive diluent that is commonly used as a component of ultraviolet light (UV) and electron beam (EB) curable coatings and inks. HDDA is particularly useful in coatings and inks where improved elasticity, w...展開 HDDA (Hexanediol diacrylate) is a difunctional reactive diluent that is commonly used as a component of ultraviolet light (UV) and electron beam (EB) curable coatings and inks. HDDA is particularly useful in coatings and inks where improved elasticity, weathering and adhesion are desired in combination with excellent water resistance. 收起 | Request Sample |
| HETRON® 980/35-45 | Allnex | HETRON® 980/35-45 is a prepromoted, thixotropic, wax free, Novolac epoxy based vinyl ester resin containing less than 35% styrene. | Request Sample |
| LA Glass Flake GF001LA | Glassflake Ltd | LA Glass Flake GF001LA is a Low Alkali Glassflake, or LAG, which has been formulated specifically for use as a pigment substrate, giving the finished product unique effects. Glass flakes, or borosilicates as they are often referred to, are a unique substr...展開 LA Glass Flake GF001LA is a Low Alkali Glassflake, or LAG, which has been formulated specifically for use as a pigment substrate, giving the finished product unique effects. Glass flakes, or borosilicates as they are often referred to, are a unique substrate which, unlike natural micas and synthetic micas, have a completely planar and smooth surface. They are also completely transparent, giving rise to effect pigments coated with metal oxides that display high brightness, good color purity, and high chroma. Presently glass flake pigments are used in both cosmetic and industrial applications including automotive coatings. 收起 | |
| LA Glass Flake GF100LA | Glassflake Ltd | LA Glass Flake GF100LA is a Low Alkali Glassflake, or LAG, which has been formulated specifically for use as a pigment substrate, giving the finished product unique effects. Glass flakes, or borosilicates as they are often referred to, are a unique substr...展開 LA Glass Flake GF100LA is a Low Alkali Glassflake, or LAG, which has been formulated specifically for use as a pigment substrate, giving the finished product unique effects. Glass flakes, or borosilicates as they are often referred to, are a unique substrate which, unlike natural micas and synthetic micas, have a completely planar and smooth surface. They are also completely transparent, giving rise to effect pigments coated with metal oxides that display high brightness, good color purity, and high chroma. Presently glass flake pigments are used in both cosmetic and industrial applications including automotive coatings. 收起 | |
| LA Glass Flake GF100MLA | Glassflake Ltd | LA Glass Flake GF100MLA is a Low Alkali Glassflake, or LAG, which has been formulated specifically for use as a pigment substrate, giving the finished product unique effects. Glass flakes, or borosilicates as they are often referred to, are a unique subst...展開 LA Glass Flake GF100MLA is a Low Alkali Glassflake, or LAG, which has been formulated specifically for use as a pigment substrate, giving the finished product unique effects. Glass flakes, or borosilicates as they are often referred to, are a unique substrate which, unlike natural micas and synthetic micas, have a completely planar and smooth surface. They are also completely transparent, giving rise to effect pigments coated with metal oxides that display high brightness, good color purity, and high chroma. Presently glass flake pigments are used in both cosmetic and industrial applications including automotive coatings. 收起 | |
| MACRYNAL® SM 2516/70BAC | Allnex | MACRYNAL® SM 2516/70BAC is a hydroxy functional acrylic resin crosslinkable with polyisocyanates. It is recommended for air-drying and forced drying two-pack medium high solids systems with high gloss. It offers excellent mechanical properties, excellent ...展開 MACRYNAL® SM 2516/70BAC is a hydroxy functional acrylic resin crosslinkable with polyisocyanates. It is recommended for air-drying and forced drying two-pack medium high solids systems with high gloss. It offers excellent mechanical properties, excellent chemical resistance and good outdoor stability for automotive refinishes. 收起 | Request Sample |
| MACRYNAL® SM 2703/80BACX | Allnex | MACRYNAL® SM 2703/80BACX is a hydroxy functional acrylic resin designed for crosslinking with polyisocyanates for air-drying as well as forced drying high-solids two pack topcoats for industrial applications. | Request Sample |
| MACRYNAL® SM 2704/75BACX | Allnex | 羥基官能團丙烯酸樹脂，設計用於與聚異氰酸酯交聯。快干體系，具有高硬度 | Request Sample |
| MACRYNAL® SM 2711/70BAC | Allnex | Macrynal® SM 2711/70BAC is a hydroxy functional acrylic resin designed for crosslinking with polyisocyanates. It is used for air-drying as well as forced drying high-solids two pack primers and topcoats for industrial applications. | Request Sample |
| MACRYNAL® SM 2727/70X | Allnex | MACRYNAL® SM 2727/70X is a hydroxy functional acrylic resin designed for crosslinking with polyisocyanates. It is used for air‐drying as well as forced drying high‐solids, two pack primers and topcoats for industrial applications. This product leads to fa...展開 MACRYNAL® SM 2727/70X is a hydroxy functional acrylic resin designed for crosslinking with polyisocyanates. It is used for air‐drying as well as forced drying high‐solids, two pack primers and topcoats for industrial applications. This product leads to fast drying systems with high hardness. The principal application area is industrial coatings, in particular primers and topcoats. Such paints display a low content of volatile organic compounds (VOC). 收起 | Request Sample |
| MACRYNAL® SM 2810/75BAC | Allnex | 羥基官能團丙烯酸樹脂，設計用於與聚異氰酸酯交聯。具有杰出的綜合性能，比如耐化學品性能，機械性能和戶外穩定性 | Request Sample |
| MACRYNAL® SM 2815/70BAC | Allnex | MACRYNAL® SM 2815/70BAC is a hydroxyfunctional, acrylic modified polyester. It is cross-linkable with polyisocyanates for the production of high solids lacquers. Coatings based on MACRYNAL® SM 2815/70BAC show properties such as a very good balance of hard...展開 MACRYNAL® SM 2815/70BAC is a hydroxyfunctional, acrylic modified polyester. It is cross-linkable with polyisocyanates for the production of high solids lacquers. Coatings based on MACRYNAL® SM 2815/70BAC show properties such as a very good balance of hardness and flexibility, resistance toward solvents, and very good weathering stability. 收起 | Request Sample |
| MACRYNAL® SM 2855/70BAC | Allnex | Macrynal® SM 2855/70BAC is a hydroxy functional acrylic resin designed for crosslinking with polyisocyanates. It is a high solid binder for the formulation of fast drying, highly crosslinked two-pack polyurethane coatings providing outstanding properties ...展開 Macrynal® SM 2855/70BAC is a hydroxy functional acrylic resin designed for crosslinking with polyisocyanates. It is a high solid binder for the formulation of fast drying, highly crosslinked two-pack polyurethane coatings providing outstanding properties in terms of chemical and solvent resistance. 收起 | Request Sample |
| MACRYNAL® SM 2892/65XBAC | Allnex | Macrynal® SM 2892/65XBAC is a hydroxy-functional acrylic polymer and is cross-linkable with polyisocyanates. In combination with aliphatic polyisocyanates, it produces high quality, flexible two-pack clearcoats and pigmented topcoats. The cured films prov...展開 Macrynal® SM 2892/65XBAC is a hydroxy-functional acrylic polymer and is cross-linkable with polyisocyanates. In combination with aliphatic polyisocyanates, it produces high quality, flexible two-pack clearcoats and pigmented topcoats. The cured films provide a good balance of flexibility and hardness, additionally, such films show superior weathering stability. 收起 | Request Sample |
| MACRYNAL® SM 500/60X | Allnex | MACRYNAL® SM 500/60X is a hydroxy functional acrylic resin, cross-linkable with polyisocyanates with high gloss, good mechanical properties and good adhesion to metals and plastic substrates. | Request Sample |
| MACRYNAL® SM 510/60LG | Allnex | 羥基官能團丙烯酸樹脂，可與聚異氰酸酯交聯，具有高光澤，非常好的機械性能，出色的戶外穩定性和耐化學品性能 | Request Sample |
| MACRYNAL® SM 510n/60LG | Allnex | 羥基官能團丙烯酸樹脂，設計用於與聚異氰酸酯交聯 | Request Sample |
| MACRYNAL® SM 510n/60LGV5 | Allnex | MACRYNAL® SM 510n/60LGV5 is a hydroxy functional acrylic resin designed for crosslinking with polyisocyanates. It is intended primarily for use in automotive refinish coatings. This product offers quick hardness, excellent outdoor durability, and very goo...展開 MACRYNAL® SM 510n/60LGV5 is a hydroxy functional acrylic resin designed for crosslinking with polyisocyanates. It is intended primarily for use in automotive refinish coatings. This product offers quick hardness, excellent outdoor durability, and very good mechanical properties and chemical resistance. 收起 | Request Sample |
| MACRYNAL® SM 510n/65BACX | Allnex | 羥基官能團丙烯酸樹脂，設計用於與聚異氰酸酯交聯。具有高光澤，出色的機械性能和良好的戶外耐久性和耐化學品性能 | Request Sample |
| MACRYNAL® SM 512/65BACX | Allnex | Macrynal® SM 512/65BACX is a hydroxy functional acrylic resin, designed for crosslinking with polyisocyanates for varnishes for industrial use. The good compatibility with Tolonate HDB and Desmodur N allows the production of fast drying primers and top co...展開 Macrynal® SM 512/65BACX is a hydroxy functional acrylic resin, designed for crosslinking with polyisocyanates for varnishes for industrial use. The good compatibility with Tolonate HDB and Desmodur N allows the production of fast drying primers and top coats for spray applications. 收起 | Request Sample |
| MACRYNAL® SM 513/60LG | Allnex | 羥基官能團丙烯酸樹脂，設計用於與聚異氰酸酯交聯 | Request Sample |
| MACRYNAL® SM 515/70BAC | Allnex | 羥基官能團丙烯酸樹脂，可與聚異氰酸酯交聯，結合脂肪族聚異氰酸酯時，建議用於自干和烘干型雙組份高固含體系汽車OEM和表面修整涂料 | Request Sample |
| MACRYNAL® SM 516/70BAC | Allnex | 丙烯酸樹脂，含有羥基基團，用於交聯聚異氰酸酯或三聚氰胺 | Request Sample |
| MACRYNAL® SM 540/60X | Allnex | 羥基官能團丙烯酸樹脂，可與聚異氰酸酯交聯，具有高光澤，出色的機械性能和良好的金屬和非鐵金屬附著力 | Request Sample |
| MACRYNAL® SM 548/50X | Allnex | 羥基官能團丙烯酸樹脂，可與聚異氰酸酯交聯制備快干雙組份工業漆 | Request Sample |
| MACRYNAL® SM 565/70BAC | Allnex | Macrynal® SM 565/70BAC is a hydroxy-functional acrylic resin; cross-linkable with polyisocyanates for the production of high solids lacquers. | Request Sample |
| MACRYNAL® SM 595/65X | Allnex | MACRYNAL® SM 595/65X is a hydroxy functional acrylic resin, cross-linkable with polyisocyanates. It offers fast drying and hardness development for 2K finishes for refinish, industrial, plastics as well as wood. It can be used for primers, clear coats, an...展開 MACRYNAL® SM 595/65X is a hydroxy functional acrylic resin, cross-linkable with polyisocyanates. It offers fast drying and hardness development for 2K finishes for refinish, industrial, plastics as well as wood. It can be used for primers, clear coats, and topcoats. 收起 | Request Sample |
| MACRYNAL® SM 6810w/42WA | Allnex | 水性羥基官能團丙烯酸樹脂，與水乳化聚異氰酸酯結合，可用於制備高品質雙組分面漆，具有出色的應用性和外觀 | Request Sample |
| MACRYNAL® SM 6817w/44WA | Allnex | Macrynal® SM 6817w/44WA is an aqueous hydroxy functional acrylic resin. It is used in combination with water-emulsifiable poly-isocyanates for fast drying waterborne 2-pack-topcoats with very good applicability and appearance. This product has low isocyan...展開 Macrynal® SM 6817w/44WA is an aqueous hydroxy functional acrylic resin. It is used in combination with water-emulsifiable poly-isocyanates for fast drying waterborne 2-pack-topcoats with very good applicability and appearance. This product has low isocyanate consumption due to its low hydroxyl value. 收起 | Request Sample |
| MACRYNAL® SM 6826w/43WA | Allnex | Macrynal® SM 6826w/43WA is a waterborne, hydroxy functional polyacrylate dispersion. It is highly suitable for the formulation of top quality 2-pack polyurethane coatings, in particular primer surfacers/fillers as well as matte top- and clear coats, when ...展開 Macrynal® SM 6826w/43WA is a waterborne, hydroxy functional polyacrylate dispersion. It is highly suitable for the formulation of top quality 2-pack polyurethane coatings, in particular primer surfacers/fillers as well as matte top- and clear coats, when used in combination with water-emulsifiable polyisocyanates. 收起 | Request Sample |
| MACRYNAL® SM 685/55BAC | Allnex | Macrynal® SM 685/55BAC is a hydroxy functional acrylic resin for polyurethane primers, primer surfacers, furniture and industrial coatings, and cross-linkable with polyisocyanates. | Request Sample |
| MACRYNAL® VSM 1509/60LG | Allnex | 羥基官能團丙烯酸樹脂，可與聚異氰酸酯交聯。制備工業用非常快干雙組份涂料。良好地平衡了彈性和涂膜硬度 | Request Sample |
| MACRYNAL® VSM 2155/60EPAC | Allnex | Macrynal® VSM 2155/60EPAC is a hydroxy functional acrylic resin; cross-linkable with polyisocyanates for the production of coatings with extraordinary high chemical resistance. | Request Sample |
| MACRYNAL® VSM 2521w/42WAB | Allnex | 反應性水性丙烯酸樹脂，含有羥基基團，用於雙組份自干和烤漆體系的高品質清漆和有色面漆 | Request Sample |
