| Aromatic Urethane Hexaacrylate SM6329 | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | SM6329 is an aromatic urethane hexaacrylate. It offers high reactivity and hardness, and provides abrasion and chemical resistance. SM6329 is widely used in UV coatings, adhesives and inks. | |
| Bemliese™ (Basic type: High-performance cellulose nonwoven fabric sheet) | Asahi Kasei Corp. Bemberg Div. | Bemliese™ (Basic type: High-performance cellulose nonwoven fabric sheet) is a nonwoven that is unique in that it is composed of cellulose continuous-filament. Most nonwovens are composed of either natural short fibers or synthetic fibers. Compared with th...展開 Bemliese™ (Basic type: High-performance cellulose nonwoven fabric sheet) is a nonwoven that is unique in that it is composed of cellulose continuous-filament. Most nonwovens are composed of either natural short fibers or synthetic fibers. Compared with these conventional materials, due to composition, Bemliese™ has excellent features such as low particle and lint, high purity and biodegradability, good liquid absorbency, high heat resistance, etc. It's made from cotton linter, which is a by-product of cotton yield. It is suitable for use in filters, hygienic products, medical and agricultural materials, wipes for high-precision machinery and laboratories, etc. It holds international certification in BIODEGRADABLE, VEGAN, and OEKO-TEX. The Basic type: Fiber diameter is about 12~13μm. These values are just for reference and tested by methods of Asahi Kasei. 收起 | |
| Bisphenol A Epoxy Diacrylate SM6104 | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | SM6104 is a standard bisphenol A epoxy diacrylate. It provides low viscosity and light color, and offers high gloss, hardness and excellent chemical resistance. This product is widely used in UV coatings, inks and adhesives, and more. | |
| C9-10 | SWISLOYD LIMITED | C9-10 is an aromatic hydrocarbon resin that appears as light-yellow granules or flakes. This product has a softening point at 111°C-120°C and pH value that range from 5-8. It has resistant to water and ethanol, and is primarily used in paints, printing in...展開 C9-10 is an aromatic hydrocarbon resin that appears as light-yellow granules or flakes. This product has a softening point at 111°C-120°C and pH value that range from 5-8. It has resistant to water and ethanol, and is primarily used in paints, printing inks, and adhesives. 收起 | |
| C9-12 | SWISLOYD LIMITED | C9-12 is an aromatic hydrocarbon resin that appears as light-yellow granules or flakes. This product has a softening point at 111°C-120°C and pH value that range from 5-8. It has resistant to water and ethanol, and is primarily used in paints, printing in...展開 C9-12 is an aromatic hydrocarbon resin that appears as light-yellow granules or flakes. This product has a softening point at 111°C-120°C and pH value that range from 5-8. It has resistant to water and ethanol, and is primarily used in paints, printing inks, and adhesives. 收起 | |
| C9-7 | SWISLOYD LIMITED | C9-7 is an aromatic hydrocarbon resin that appears as light-yellow granules or flakes. This product has a softening point at 111°C-120°C and pH value that range from 5-8. It has resistant to water and ethanol, and is primarily used in paints, printing ink...展開 C9-7 is an aromatic hydrocarbon resin that appears as light-yellow granules or flakes. This product has a softening point at 111°C-120°C and pH value that range from 5-8. It has resistant to water and ethanol, and is primarily used in paints, printing inks, and adhesives. 收起 | |
| C9-8 | SWISLOYD LIMITED | C9-8 is an aromatic hydrocarbon resin that appears as light-yellow granules or flakes. This product has a softening point at 111°C-120°C and pH value that range from 5-8. It has resistant to water and ethanol, and is primarily used in paints, printing ink...展開 C9-8 is an aromatic hydrocarbon resin that appears as light-yellow granules or flakes. This product has a softening point at 111°C-120°C and pH value that range from 5-8. It has resistant to water and ethanol, and is primarily used in paints, printing inks, and adhesives. 收起 | |
| CAC (2-Ethoxyethyl Acetate) | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | CAC (2-Ethoxyethyl Acetate) is a colorless, water-soluble liquid. It is miscibile with general organic solvents. This product is mainly used for metal, furniture paint solvents, brush paint solvent, also can be used as solvent of protective coating, dye, ...展開 CAC (2-Ethoxyethyl Acetate) is a colorless, water-soluble liquid. It is miscibile with general organic solvents. This product is mainly used for metal, furniture paint solvents, brush paint solvent, also can be used as solvent of protective coating, dye, resin, leather, printing ink. 收起 | |
| Cyclic Trimethylopropane Formal Acrylate (CTFA) | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | CTFA is a mono-functional UV monomer. It offers high reactivity, flexibility, low shrinkage, and good adhesion. This monomer is widely used in UV or EB cured coatings, adhesives and inks. | |
| DBE (Dibasic Esters) | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | DBE is a mixed dibasic acid ester with a high boiling point. It is a kind of low toxicity, low odor, biodegradable and environmentally friendly solvent. This product is widely used in paints, coatings, printing inks, and other fields. | |
| DPM (Dipropylene Glycol Methyl Ether) | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | DPM is a top grade solvent used in water-based coatings. It has low toxicity, low viscosity, low surface tension, good evaporation rate, good dissolving ability, and good coupling ability. This product is widely used in paints, coatings, and printing inks...展開 DPM is a top grade solvent used in water-based coatings. It has low toxicity, low viscosity, low surface tension, good evaporation rate, good dissolving ability, and good coupling ability. This product is widely used in paints, coatings, and printing inks. 收起 | |
| Epoxy Resin SM828 | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | SM828 is an undiluted, clear difunctional bisphenol A/epichlorohydrin derived liquid epoxy resin. It is a widely-used, general purpose liquid epoxy resin. This product is recognized as the standard from which many variations have been developed. It is rec...展開 SM828 is an undiluted, clear difunctional bisphenol A/epichlorohydrin derived liquid epoxy resin. It is a widely-used, general purpose liquid epoxy resin. This product is recognized as the standard from which many variations have been developed. It is recommended for adhesives, marine and protective coatings, can and coil coatings, automotive coatings, and more. 收起 | |
| Gum Rosin WG | SWISLOYD LIMITED | Gum Rosin WG is a yellow solid resin that has a softening point at 75°C with an acid value of 165 mgKOH/g. This product is a natural organic compound that is mainly composed of resins and possesses chemical activity when dissolved in many organic solvents...展開 Gum Rosin WG is a yellow solid resin that has a softening point at 75°C with an acid value of 165 mgKOH/g. This product is a natural organic compound that is mainly composed of resins and possesses chemical activity when dissolved in many organic solvents. It is primarily used for the production of paints and printing inks. 收起 | |
| Gum Rosin WW | SWISLOYD LIMITED | Gum Rosin WW is a light yellow solid resin that has a softening point at 76°C with an acid value of 166 mgKOH/g. This product is a natural organic compound that is mainly composed of resins and possesses chemical activity when dissolved in many organic so...展開 Gum Rosin WW is a light yellow solid resin that has a softening point at 76°C with an acid value of 166 mgKOH/g. This product is a natural organic compound that is mainly composed of resins and possesses chemical activity when dissolved in many organic solvents. It is primarily used for the production of paints and printing inks. 收起 | |
| Gum Rosin X | SWISLOYD LIMITED | Gum Rosin X is a pale yellow transparent solid resin that has a softening point at 76°C with an acid value of 166 mgKOH/g. This product is a natural organic compound that is mainly composed of resins and possesses chemical activity when dissolved in many ...展開 Gum Rosin X is a pale yellow transparent solid resin that has a softening point at 76°C with an acid value of 166 mgKOH/g. This product is a natural organic compound that is mainly composed of resins and possesses chemical activity when dissolved in many organic solvents. It is primarily used for the production of paints and printing inks. 收起 | |
| Iron Oxide Blue | Tongling Rely Technology Co., Ltd. | Iron Oxide Blue is a dark and light blue pigment powder that has an oil absorption of 15-30% and a moisture content of 1%. This product is used for strong and bright coloring in paint and ink applications. | |
| Iron Oxide Yellow | Tongling Rely Technology Co., Ltd. | Iron Oxide Yellow is an iron oxide pigment of relatively stable chemical properties of alkaline oxides. This product provides a pure and bright yellow color of iron with good weather resistance and hiding power. It is commonly used in ink applications. | |
| Propylene Glycol Monomethyl Ether Acetate (PMA) | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | Propylene Glycol Monomethyl Ether Acetate (PMA) is a senior solvent. Because of its molecular structure, it is able to dissolve both polar and non-polar substance. This product is highly recommended for coatings and printing inks, and is also suitable for...展開 Propylene Glycol Monomethyl Ether Acetate (PMA) is a senior solvent. Because of its molecular structure, it is able to dissolve both polar and non-polar substance. This product is highly recommended for coatings and printing inks, and is also suitable for unsaturated polyester, epoxy resins, polyurethane resins, and acrylic resins. 收起 | |
| Propylene Glycol Monomethyl Ether (PM) | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | Propylene Glycol Monomethyl Ether (PM) is a solvent for nitrocellulose, alkyd resins, and anhydride-modified phenolic resins. It is also used as an additive for antifreeze and brake fluid. This product has excellent dissolving performance, and has appropr...展開 Propylene Glycol Monomethyl Ether (PM) is a solvent for nitrocellulose, alkyd resins, and anhydride-modified phenolic resins. It is also used as an additive for antifreeze and brake fluid. This product has excellent dissolving performance, and has appropriate volatility and reactivity characteristics for a wide range of applications. 收起 | |
| Soya Fatty Acid | SWISLOYD LIMITED | Soya Fatty Acid is a monocarboxylic acid that is made of soya bean oil. This product is formulated to have an acid value in the range of 195-205 mgKOH/g. It is primarily used in paints, alkyd resins, inks, coatings and surfactants. |
