| ADDITOL® XW 6528 | Allnex | 可水稀釋，改性聚酯-丙烯酸酯樹脂 | Request Sample |
| CN2609 | Sartomer Americas | CN2609 is a polyester acrylate which offers excellent adhesion to formulations. It is particularly suitable for metal coatings (primers) and metallized plastic coatings. | |
| CN2610 | Sartomer Americas | CN2610 is a polyester acrylate for use in ultra violet and electron beam curing compositions. It was specially developed to offer very good adhesion to melamine surfaces. | |
| EBECRYL® 4744 | Allnex | EBECRYL® 4744 is a polyester acrylate for use in the formulation of ultraviolet light (UV) or electron beam (EB) energy curable coatings. It exhibits a very balanced property profile and is suitable for use as the sole binder or used in combination with o...展開 EBECRYL® 4744 is a polyester acrylate for use in the formulation of ultraviolet light (UV) or electron beam (EB) energy curable coatings. It exhibits a very balanced property profile and is suitable for use as the sole binder or used in combination with other binders to set specific properties. EBECRYL® 4744 is used in the formulation of UV/EB coatings for wood, furniture, paper, parquet and films applied by roll, spray and curtain coating processes. 收起 | Request Sample |
| EBECRYL® 875 | Allnex | EBECRYL® 875 is an ultraviolet light (UV) or electron beam (EB) curable polyester acrylate for either wet or dry offset printing on plastic substrates. Inks made using EBECRYL® 875 obtain excellent adhesion to calendered vinyl, polystyrene, polyolefins, p...展開 EBECRYL® 875 is an ultraviolet light (UV) or electron beam (EB) curable polyester acrylate for either wet or dry offset printing on plastic substrates. Inks made using EBECRYL® 875 obtain excellent adhesion to calendered vinyl, polystyrene, polyolefins, polycarbonate and PVC. The water balance of this product allows inks based upon it to be run on press with low amounts of fountain solution: a key parameter for printing on non-absorbent substrates. EBECRYL® 875 also exhibits low odor. 收起 | Request Sample |
| EBECRYL® 88 | Allnex | EBECRYL® 88 is an amine modified polyether acrylate that exhibits low viscosity and fast cure via exposure to ultraviolet light (UV). Films of EBECRYL® 88 cured by UV or electron beam (EB) demonstrate high gloss, solvent resistance and low residual odor. ...展開 EBECRYL® 88 is an amine modified polyether acrylate that exhibits low viscosity and fast cure via exposure to ultraviolet light (UV). Films of EBECRYL® 88 cured by UV or electron beam (EB) demonstrate high gloss, solvent resistance and low residual odor. EBECRYL® 88 is especially suited to applications requiring low viscosity and fast UV cure, including overprint varnishes and flexographic inks. 收起 | Request Sample |
| EBECRYL® LED 02 | Allnex | EBECRYL® LED 02, a mercapto modified polyester acrylate resin, can be added as a co-resin to UV curable formulations. EBECRYL® LED 02 transforms formulations into UV LED, UVA, or low energy curable systems by providing better surface cure. In addition, th...展開 EBECRYL® LED 02, a mercapto modified polyester acrylate resin, can be added as a co-resin to UV curable formulations. EBECRYL® LED 02 transforms formulations into UV LED, UVA, or low energy curable systems by providing better surface cure. In addition, this co-resin can also be used to obtain better surface cure in high energy cure formulations. EBECRYL® LED 02 provides better surface cure by mitigating oxygen inhibition of the free radical process. 收起 | Request Sample |
| EBECRYL® LED 03 | Allnex | EBECRYL® LED 03 is a low viscosity amine modified polyether acrylate oligomer that can be added as a co‐resin to UV curable formulations. EBECRYL® LED 03 – when combined with an appropriate photoinitiator system – transforms formulations into UV LED, UVA,...展開 EBECRYL® LED 03 is a low viscosity amine modified polyether acrylate oligomer that can be added as a co‐resin to UV curable formulations. EBECRYL® LED 03 – when combined with an appropriate photoinitiator system – transforms formulations into UV LED, UVA, or low energy curable systems by providing improved surface cure. In addition, this effect is also seen in high energy cure formulations. The improved surface cure is obtained by mitigating oxygen inhibition of the free radical process and/or by being an amine synergist for Norrish type II photoinitiators. 收起 | Request Sample |
| GENOMER* 3611 | Rahn AG | 脂肪酸改性的聚酯丙烯酸酯。作為可自由基固化的油墨，涂料和膠粘劑用樹脂。推薦用於需要高反應活性和良好顏料潤濕性的應用中。具有非常好的顏料潤濕性，高反應活性，良好的耐刮擦性能和耐溶劑性能，高耐磨性和非常好的平版印刷效果。 | Request Sample |
| GENOMER* 4312TF | Rahn AG | GENOMER* 4312TF is an aliphatic polyester urethane acrylate. It offers excellent reactivity, especially in pigmented systems. It also imparts good abrasion and solvent resistance, low odor, and good flexibility. This product is recommended for printing in...展開 GENOMER* 4312TF is an aliphatic polyester urethane acrylate. It offers excellent reactivity, especially in pigmented systems. It also imparts good abrasion and solvent resistance, low odor, and good flexibility. This product is recommended for printing inks and varnishes, varnishes for paper, board, and plastics, for wood and industrial coatings, and for adhesives. 收起 | Request Sample |
| GENOMER* 7151 | Rahn AG | 用於自由基固化油墨、涂料和粘膠的羧基聚酯丙烯酸脂樹脂。 | Request Sample |
| POLYESTER ACRYLATE 03-849 | Rahn AG | 用於自由基固化油墨、涂料和粘膠的聚酯丙烯酸酯樹脂。 | Request Sample |
| SARBIO 7201 | Sartomer Americas | SARBIO 7201 is a polyester acrylate with a minimum BRC (BioRenewable Carbon Content) of 45%. It is particularly suitable for low viscosity and ink applications with a very high reactivity and a very good pigment wetting. | |
| SARBIO 7202 | Sartomer Americas | SARBIO 7202 is a polyester acrylate with a minimum BRC (BioRenewable Carbon Content) of 45%. It is particularly suitable for ink and coating applications. It offers excellent pigment wetting, very good water balance and good reactivity to formulations. |
