| Abiester 90 | Spolchemie | Abiester 90 is a transparent yellow-brown solvent-free colophony ester binder for coatings and adhesives. This product is made from rosin resin and glycerin. Abiester 90 is primarily used for coatings, hot melt adhesives and is also used in printing inks. | |
| Abifen 125 D | Spolchemie | Abifen 125 D is a transparent yellow-brown solvent-free colophony ester binder for coatings and adhesives. This product is made from rosin resin and phenol-formaldehyde. Abifen 125 D is primarily used for coatings, adhesives and it also can be used in rub...展開 Abifen 125 D is a transparent yellow-brown solvent-free colophony ester binder for coatings and adhesives. This product is made from rosin resin and phenol-formaldehyde. Abifen 125 D is primarily used for coatings, adhesives and it also can be used in rubber mixtures. 收起 | |
| Abimal 125 | Spolchemie | Abimal 125 is a transparent yellow-brown non solvent ester binder for coatings and adhesives. This product is a mixture of rosin resin and maleic anhydride. Abimal 125 is primarily used for modifying alkyd and nitrocellulose coatings, printing inks. It al...展開 Abimal 125 is a transparent yellow-brown non solvent ester binder for coatings and adhesives. This product is a mixture of rosin resin and maleic anhydride. Abimal 125 is primarily used for modifying alkyd and nitrocellulose coatings, printing inks. It also provides weather resistance and gloss finish. 收起 | |
| Burez® K80 505A E | Lawter | Burez® K80 505A E is a potassium soap with 80% solids and is considered for use primarily in resin pigments for inks. The Burez® range of products is mainly designed for emulsion polymerization, wet glue formulations and organic pigment production. | |
| Cinergi™ 2100 E | Lawter | Cinergi™ 2100 E is a special varnish that is non-volatile and which is based on rosin resin, vegetable oil and mineral distillates. It shows good leafing, high gloss and oxidation and rub resistance. The product is ideally suited for metallic inks and has...展開 Cinergi™ 2100 E is a special varnish that is non-volatile and which is based on rosin resin, vegetable oil and mineral distillates. It shows good leafing, high gloss and oxidation and rub resistance. The product is ideally suited for metallic inks and has application in offset, sheet-fed, web-fed and letterpress printing techniques. 收起 | |
| Cinergi™ 2239 E | Lawter | Cinergi™ 2239 E is a gel varnish that is fast setting with a high gloss. It has good water as well as heat and shear resistance qualities and finds uses in offset, quickset, sheet-fed and gloss offset inks. | |
| Cinergi™ 4170 E | Lawter | Cinergi™ 4170 E is a special, 100% non-volatile varnish from rosin-based resin, vegetable oil, rosin ester and tung oil. It has a tough, hard film and is rub, scruff, grease, alkali and detergent resistant. The product is used in offset, packaging, sheet-...展開 Cinergi™ 4170 E is a special, 100% non-volatile varnish from rosin-based resin, vegetable oil, rosin ester and tung oil. It has a tough, hard film and is rub, scruff, grease, alkali and detergent resistant. The product is used in offset, packaging, sheet-fed and 100% NV inks as well as in overprint varnishes. 收起 | |
| Cinergi™ 7000 E | Lawter | Cinergi™ 7000 E is a non-volatile gloss varnish based on vegetable oils and rosin-based resin. It shows better resistance to fountain solutions that have alcohol and also displays water resistance to metal deco inks. The product improves transfer due to a...展開 Cinergi™ 7000 E is a non-volatile gloss varnish based on vegetable oils and rosin-based resin. It shows better resistance to fountain solutions that have alcohol and also displays water resistance to metal deco inks. The product improves transfer due to a high tack and displays a high print quality under trying press conditions. It is used in offset, sheet-fed, gloss offset, screen ink and letterpress applications. 收起 | |
| Cinergi™ 7101 E | Lawter | Cinergi™ 7101 E is a gel varnish from rosin-based resins, mineral distillates and alkyd resins that show high gloss, has fast setting and good water balance properties. It is used as a let down varnish or gel in sheet-fed and quickset offset inks and can ...展開 Cinergi™ 7101 E is a gel varnish from rosin-based resins, mineral distillates and alkyd resins that show high gloss, has fast setting and good water balance properties. It is used as a let down varnish or gel in sheet-fed and quickset offset inks and can be combined with pigment wetting varnishes. 收起 | |
| Cinergi™ 7105 E | Lawter | Cinergi™ 7105 E is a gel varnish from rosin-based resins, ester solvents, gelling agents, alkyd resins and vegetable oil. It shows good setting combined with high gloss, has good heat and shear resistance properties and good lithographic behavior. The pro...展開 Cinergi™ 7105 E is a gel varnish from rosin-based resins, ester solvents, gelling agents, alkyd resins and vegetable oil. It shows good setting combined with high gloss, has good heat and shear resistance properties and good lithographic behavior. The product is used as a let down varnish or gel in quickset offset inks or in sheet-fed inks for high speed presses. 收起 | |
| Cinergi™ 7106 E | Lawter | Cinergi™ 7106 E is a gel varnish made up of a rosin-based resins, gelling agents, ester of vegetable oils and mineral distillates. It shows high gloss, is fast setting and has good water balance on fast presses. The product is used as a varnish or gel in ...展開 Cinergi™ 7106 E is a gel varnish made up of a rosin-based resins, gelling agents, ester of vegetable oils and mineral distillates. It shows high gloss, is fast setting and has good water balance on fast presses. The product is used as a varnish or gel in sheet-fed and quickset offset inks. 收起 | |
| Cinergi™ 7107 E | Lawter | Cinergi™ 7107 E is a gel varnish based on modified rosin-based resin, mineral distillates and vegetable oil. It is fast setting, has good water balance and print sharpness. The product shows a medium viscosity together with a low yield value and is used a...展開 Cinergi™ 7107 E is a gel varnish based on modified rosin-based resin, mineral distillates and vegetable oil. It is fast setting, has good water balance and print sharpness. The product shows a medium viscosity together with a low yield value and is used as a varnish or gel in sheet-fed and quickset offset inks. 收起 | |
| Cinergi™ 8000 E | Lawter | Cinergi™ 8000 E is a gloss varnish that is 100% non-volatile and which is based on vegetable oils and rosin-based resins. It displays good rub resistance, is water resistant and fast setting with a high gloss. It has the ability to replace alkyds in inks ...展開 Cinergi™ 8000 E is a gloss varnish that is 100% non-volatile and which is based on vegetable oils and rosin-based resins. It displays good rub resistance, is water resistant and fast setting with a high gloss. It has the ability to replace alkyds in inks and varnishes and is ideally used in offset, sheet-fed, gloss offset and metal deco applications. 收起 | |
| Cinergi™ 8001 E | Lawter | Cinergi™ 8001 E is a non-volatile gloss varnish derived from rosin-based resins and vegetable oils that have the characteristics of being water resistant, are able to replace alkyds in inks and varnishes, and have good rub resistance. The product is also ...展開 Cinergi™ 8001 E is a non-volatile gloss varnish derived from rosin-based resins and vegetable oils that have the characteristics of being water resistant, are able to replace alkyds in inks and varnishes, and have good rub resistance. The product is also fast setting with a high gloss that is ideal for use in sheet-fed, offset and gloss offset applications. 收起 | |
| Decotherm™ 100 E | Lawter | Decotherm™ 100 E is a gel varnish from rosin-based resin, gelling agents, alkyd resin and mineral distillates. It displays high gloss, has fast drying and curing abilities with good adhesion to steel, aluminum and tin. The product is used in inks printed ...展開 Decotherm™ 100 E is a gel varnish from rosin-based resin, gelling agents, alkyd resin and mineral distillates. It displays high gloss, has fast drying and curing abilities with good adhesion to steel, aluminum and tin. The product is used in inks printed on steel, flat tin or aluminum products. 收起 | |
| Decotherm™ 220 E | Lawter | Decotherm™ 220 E is a polyester resin dissolved in Dobanol 23 and tridecylalcohol in metal deco inks for dry offset or spindle printing on a 2-piece decorative can. It shows good adhesion to metals with a high gloss, good printability, transfer and MEK re...展開 Decotherm™ 220 E is a polyester resin dissolved in Dobanol 23 and tridecylalcohol in metal deco inks for dry offset or spindle printing on a 2-piece decorative can. It shows good adhesion to metals with a high gloss, good printability, transfer and MEK resistance. Other applications include uses in white and colored inks. 收起 | |
| Decotherm™ 255 E | Lawter | Decotherm™ 255 E is a blocked catalyst acid that is dissolved in TXIB and is used to catalyze the cure of melamine and polyester resins at higher temperatures. Its has a fast cure speed and is meant for metal deco inks that are printed with spindle printi...展開 Decotherm™ 255 E is a blocked catalyst acid that is dissolved in TXIB and is used to catalyze the cure of melamine and polyester resins at higher temperatures. Its has a fast cure speed and is meant for metal deco inks that are printed with spindle printing or dry offsets for 2-piece decorative cans. Other applications include colored or white inks. 收起 | |
| Disvimol-101 | D.S.V. Chemicals Pvt. Ltd. | Disvimol-101 is a rosin derivative that has been modified with maleic acid. This product is oil-soluble and is compatible with alkyds. It is used in high gloss synthetic enamels. It can also be used in general inks, letterpress inks, and offset gloss i...展開 Disvimol-101 is a rosin derivative that has been modified with maleic acid. This product is oil-soluble and is compatible with alkyds. It is used in high gloss synthetic enamels. It can also be used in general inks, letterpress inks, and offset gloss inks. 收起 | |
| Disvimol-102 | D.S.V. Chemicals Pvt. Ltd. | Disvimol-102 is a rosin derivative that has been modified with maleic acid. This product is oil-soluble and compatible with nitrocellulose substrates. It can be used in nitrocellulose lacquers and putty, in vinyl lacquers, and in flexographic inks. | |
| Disvimol-104 | D.S.V. Chemicals Pvt. Ltd. | Disvimol-104 is a rosin derivative that has been modified with maleic acid. This product is soluble in mineral spirits. It can be used in picture varnishes, paper coating, ballpoint pen inks, and liquid inks. | |
| Disvimol-106 | D.S.V. Chemicals Pvt. Ltd. | Disvimol-106 is a rosin derivative that has been modified with maleic acid. This product is soluble in mineral spirits. It can be used in picture varnishes, ballpoint pen inks, and liquid inks. | |
| Disvipol-201 | D.S.V. Chemicals Pvt. Ltd. | Disvipol-201 is a rosin derivative that has been modified with a phenolic compound. This product is scratchproof and has better solvent release. It can be used in letterpress inks, offset inks, and liquid inks. | |
| Disvipol-205 | D.S.V. Chemicals Pvt. Ltd. | Disvipol-205 is a rosin derivative. This product has been modified with phenolic compounds and offers high gloss. It can be used in letterpress inks, offset inks, and gravure printing inks. | |
| Disvipol-207 | D.S.V. Chemicals Pvt. Ltd. | Disvipol-207 is a rosin derivative. This product has been modified with phenolic compounds and offers high gloss in the final result. It can be used in web offset and quickset inks. | |
| Disvipol-209 | D.S.V. Chemicals Pvt. Ltd. | Disvipol-209 is a rosin derivative that has been modified with a phenolic compound. This product has good solubility in aliphatic hydrocarbon solvents. It can be used in high quality quickset or sheet-fed inks. | |
| Disvipol-251 | D.S.V. Chemicals Pvt. Ltd. | Disvipol-251 is a phenolic resin with high purity. This product is soluble in Novolac. It can be used in flexogravure inks, spirit varnishes, aniline inks, anti-corrosion lacquers, and traffic paints. | |
| Disvipol-252 | D.S.V. Chemicals Pvt. Ltd. | Disvipol-252 is a phenolic resin. This product has high purity, is oil-resistant, and is compatible with neoprene rubber solutions. It can be used in flexogravure inks, spirit varnishes, traffic paints, and adhesives. | |
| Disvipol-271 | D.S.V. Chemicals Pvt. Ltd. | Disvipol-271 is a phenolic resin. This product has high purity and is very chemical- and weather-resistant. It can be used in spar varnishes, marine enamels, Tung oil-adducts for offset printing, and wire enamels. | |
| Eco-Rez™ 1621 E | Lawter | Eco-Rez™ 1621 E is a polyol-modified rosin resin that is free of formaldehyde and phenols. It displays a high solubility and low viscosity in mineral distillates. The product is also fast setting, has a low odor, a high gloss and good pigment wetting prop...展開 Eco-Rez™ 1621 E is a polyol-modified rosin resin that is free of formaldehyde and phenols. It displays a high solubility and low viscosity in mineral distillates. The product is also fast setting, has a low odor, a high gloss and good pigment wetting properties. It is used in offset, sheet-fed, grinding varnishes and low odor inks. 收起 | |
| Eco-Rez™ 4237 E | Lawter | Eco-Rez™ 4237 E is a formaldehyde and phenol-free rosin resin that has low solubility combined with high viscosity in mineral distillates. It is fast setting, has a high melt point, low odor and light color making it ideal for use in OPV varnishes and low...展開 Eco-Rez™ 4237 E is a formaldehyde and phenol-free rosin resin that has low solubility combined with high viscosity in mineral distillates. It is fast setting, has a high melt point, low odor and light color making it ideal for use in OPV varnishes and low odor inks. 收起 | |
| Eco-Rez™ 4440 E | Lawter | Eco-Rez™ 4440 E is a rosin resin that is free of phenols and formaldehyde, with a medium to low viscosity and medium solubility in mineral distillates. It has high gloss, is fast setting with good pigment wetting properties. The product can be used in off...展開 Eco-Rez™ 4440 E is a rosin resin that is free of phenols and formaldehyde, with a medium to low viscosity and medium solubility in mineral distillates. It has high gloss, is fast setting with good pigment wetting properties. The product can be used in offset, sheet-fed and low odor inks. 收起 | |
| Eco-Rez™ 9500 E | Lawter | Eco-Rez™ 9500 E is a high soluble and low viscous rosin resin that has good grinding properties, is free of phenols and formaldehyde and displays low yellowing and odor. The product provides the ability to ensure a greener outcome in terms of environmenta...展開 Eco-Rez™ 9500 E is a high soluble and low viscous rosin resin that has good grinding properties, is free of phenols and formaldehyde and displays low yellowing and odor. The product provides the ability to ensure a greener outcome in terms of environmental sustainability. It is used in grinding varnishes, web offsets and low odor inks. 收起 | |
| Eco-Rez™ 9520 E | Lawter | Eco-Rez™ 9520 E is a rosin resin with a medium solubility and medium viscosity in a vegetable oil. It has low tack, low yellowing and odor, is free of phenols and formaldehyde and has good gel and anti-misting properties. The product provides a greener al...展開 Eco-Rez™ 9520 E is a rosin resin with a medium solubility and medium viscosity in a vegetable oil. It has low tack, low yellowing and odor, is free of phenols and formaldehyde and has good gel and anti-misting properties. The product provides a greener alternative and can be used in offsets, let down varnishes and low odor inks. 收起 | |
| Eco-Set™ 4002 E | Lawter | Eco-Set™ 4002 E is a grinding varnish with a phenol-free rosin that provides sustainable options in chemistry formulation. It has good tack stability, low tack inks, is fast setting with good lithographic and anti-misting properties. The product has uses ...展開 Eco-Set™ 4002 E is a grinding varnish with a phenol-free rosin that provides sustainable options in chemistry formulation. It has good tack stability, low tack inks, is fast setting with good lithographic and anti-misting properties. The product has uses in sheet-fed and high speed presses. 收起 | |
| Eco-Set™ 4025 E | Lawter | Eco-Set™ 4025 E is a non-VOC grinding varnish that is free of phenols, offering a renewable source of application in chemistry formulations. It displays good lithographic behavior with good anti-misting properties. It is also fast setting with lower tack ...展開 Eco-Set™ 4025 E is a non-VOC grinding varnish that is free of phenols, offering a renewable source of application in chemistry formulations. It displays good lithographic behavior with good anti-misting properties. It is also fast setting with lower tack inks that are suitable for use in sheet-fed and high speed presses. 收起 | |
| Eco-Set™ 4300 E | Lawter | Eco-Set™ 4300 E is a gel varnish with phenol-free rosins and mineral distillates that show good tack stability, displays ideal lithographic behavior, is fast setting and has good anti-misting qualities. The product has uses in sheet-fed and high speed pre...展開 Eco-Set™ 4300 E is a gel varnish with phenol-free rosins and mineral distillates that show good tack stability, displays ideal lithographic behavior, is fast setting and has good anti-misting qualities. The product has uses in sheet-fed and high speed presses. 收起 | |
| Eco-Set™ 4330 E | Lawter | Eco-Set™ 4330 E is a gel varnish that is 100% non-VOC and is based on phenol-free rosins which provide a sustainable alternative in chemistry formulations. It shows good tack stability, is fast setting with anti-misting properties and has good lithographi...展開 Eco-Set™ 4330 E is a gel varnish that is 100% non-VOC and is based on phenol-free rosins which provide a sustainable alternative in chemistry formulations. It shows good tack stability, is fast setting with anti-misting properties and has good lithographic behavior. The product is used in sheet-fed inks and high speed presses. 收起 | |
| Erkazit™ 4902 E | Lawter | Erkazit™ 4902 E is a phenolic modified rosin-based resinate that is used as a grinding resin in publication gravure inks. It has good pigment wetting and fast drying properties, with medium viscosity, fast solvent release and good block resistance as adde...展開 Erkazit™ 4902 E is a phenolic modified rosin-based resinate that is used as a grinding resin in publication gravure inks. It has good pigment wetting and fast drying properties, with medium viscosity, fast solvent release and good block resistance as added features. Apart from publication gravure uses, the product can also be used in grinding varnishes. 收起 | |
| Erkazit™ 4905 E | Lawter | Erkazit™ 4905 E is a phenolic modified rosin-based resinate designed for pigment grinding in the manufacture of blue, yellow and red inks. It offers good pigment wetting, fast drying and quick solvent release features in various applications including pub...展開 Erkazit™ 4905 E is a phenolic modified rosin-based resinate designed for pigment grinding in the manufacture of blue, yellow and red inks. It offers good pigment wetting, fast drying and quick solvent release features in various applications including publication gravure and grinding varnishes. 收起 | |
| Erkazit™ 4908 E | Lawter | Erkazit™ 4908 E is a metallized phenolic modified rosin-based resinate that offers good pigment wetting and fast drying behavior while showing good solubility in inks and varnishes. It also has a low viscosity which helps it to be ideally suited for use i...展開 Erkazit™ 4908 E is a metallized phenolic modified rosin-based resinate that offers good pigment wetting and fast drying behavior while showing good solubility in inks and varnishes. It also has a low viscosity which helps it to be ideally suited for use in publication gravure and grinding varnishes. 收起 | |
| Erkazit™ 7861 E | Lawter | Erkazit™ 7861 E is a phenolic modified rosin resin that has a low pigment and resin content, while offering good printing properties. It has high durability and is ideally used in publication gravure and let down varnishes. | |
| GLYCEROL ESTER OF GUM ROSIN 85 (PM-003) | PT. NASCO | GLYCEROL ESTER OF GUM ROSIN 85 is a pale thermoplastic resin made of gum rosin and glycerol / glycerine. It is perfectly soluble in various types of polymers. It exhibits excellent adhesiveness, as a result of which it is widely used to manufacture variou...展開 GLYCEROL ESTER OF GUM ROSIN 85 is a pale thermoplastic resin made of gum rosin and glycerol / glycerine. It is perfectly soluble in various types of polymers. It exhibits excellent adhesiveness, as a result of which it is widely used to manufacture various adhesives, and primarily as a tackifier in hot melt adhesives (HMA). It has little odor and is light in color. 收起 | |
| Gum Rosin | LUKEM D.O.O. | Gum Rosin is a light yellow, transparent solid with a softening point of 76ºC. This product is used as a raw material in coatings and synthetic resins. | |
| GUM ROSIN INDONESIAN (PM-002) | PT. NASCO | GUM ROSIN INDONESIAN is made up of various resin acids such as Abietic, Palustric, Isopimaric, Mercusic Acids. | |
| Gum Rosin WG | SWISLOYD LIMITED | Gum Rosin WG is a yellow solid resin that has a softening point at 75°C with an acid value of 165 mgKOH/g. This product is a natural organic compound that is mainly composed of resins and possesses chemical activity when dissolved in many organic solvents...展開 Gum Rosin WG is a yellow solid resin that has a softening point at 75°C with an acid value of 165 mgKOH/g. This product is a natural organic compound that is mainly composed of resins and possesses chemical activity when dissolved in many organic solvents. It is primarily used for the production of paints and printing inks. 收起 | |
| Gum Rosin WW | SWISLOYD LIMITED | Gum Rosin WW is a light yellow solid resin that has a softening point at 76°C with an acid value of 166 mgKOH/g. This product is a natural organic compound that is mainly composed of resins and possesses chemical activity when dissolved in many organic so...展開 Gum Rosin WW is a light yellow solid resin that has a softening point at 76°C with an acid value of 166 mgKOH/g. This product is a natural organic compound that is mainly composed of resins and possesses chemical activity when dissolved in many organic solvents. It is primarily used for the production of paints and printing inks. 收起 | |
| Gum Rosin, WW-Grade | Tianyi Chemical Engineering Material Co., Ltd. | Gum Rosin, WW-Grade, in the form of a pale yellow transparent solid, is a natural resin that can be used as a raw material in fabricating coatings and inks. This product is extremely chemically active and can be soluble in a number of organic solvents. | |
| Gum Rosin X | SWISLOYD LIMITED | Gum Rosin X is a pale yellow transparent solid resin that has a softening point at 76°C with an acid value of 166 mgKOH/g. This product is a natural organic compound that is mainly composed of resins and possesses chemical activity when dissolved in many ...展開 Gum Rosin X is a pale yellow transparent solid resin that has a softening point at 76°C with an acid value of 166 mgKOH/g. This product is a natural organic compound that is mainly composed of resins and possesses chemical activity when dissolved in many organic solvents. It is primarily used for the production of paints and printing inks. 收起 | |
| Gum Rosin, X-Grade | Tianyi Chemical Engineering Material Co., Ltd. | Gum Rosin, X-Grade, in the form of a slightly yellow transparent solid, is a natural resin that can be used as a raw material in fabricating coatings and inks. This product is extremely chemically active and can be soluble in a number of organic solvents...展開 Gum Rosin, X-Grade, in the form of a slightly yellow transparent solid, is a natural resin that can be used as a raw material in fabricating coatings and inks. This product is extremely chemically active and can be soluble in a number of organic solvents. 收起 | |
| Hydro-Rez™ 5614 A | Lawter | Hydro-Rez™ 5614 A is a fumarated modified rosin ester that can be dispersed in water with amines, ammonia or morpholine and is also soluble in alcohol. It displays fast water release in aqueous inks, exhibits good flexibility and low viscosity and its hig...展開 Hydro-Rez™ 5614 A is a fumarated modified rosin ester that can be dispersed in water with amines, ammonia or morpholine and is also soluble in alcohol. It displays fast water release in aqueous inks, exhibits good flexibility and low viscosity and its high melting point ensures good leveling and fast solvent release. The product is particularly recommended for use in flexographic inks, while also finding uses in gravure, carton and specialty inks and spirit varnishes. 收起 | |
| Hydro-Rez™ 5626 A | Lawter | Hydro-Rez™ 5626 A is a fumarated rosin ester that can be dispersed in water with morpholine, ammonia or amines and shows solubility in alcohol. A high melting point provides good leveling and fast solvent release and shows compatibility with manila resins...展開 Hydro-Rez™ 5626 A is a fumarated rosin ester that can be dispersed in water with morpholine, ammonia or amines and shows solubility in alcohol. A high melting point provides good leveling and fast solvent release and shows compatibility with manila resins, shellac and most acrylic resins and dispersions. It offers high gloss, a high softening point, flexibility and good color and odor. The product is used in gravure and flexographic inks, overprint varnishes, specialty varnishes, spirit varnishes and carton inks. 收起 | |
| Hydro-Rez™ 6500 A | Lawter | Hydro-Rez™ 6500 A is a fumaric modified rosin ester, soluble in alcohol and can be dispersed in water with amines, ammonia and morpholine. It exhibits gloss and pigment wetting in aqueous inks, while also showing a fast water release in aqueous inks. The ...展開 Hydro-Rez™ 6500 A is a fumaric modified rosin ester, soluble in alcohol and can be dispersed in water with amines, ammonia and morpholine. It exhibits gloss and pigment wetting in aqueous inks, while also showing a fast water release in aqueous inks. The product shows good adhesion on aluminum foil, can be diluted in water while a low viscosity, high rub resistance and good flexibility display its other benefits. It can be used in carton and specialty inks and in gravure and flexographic inks. 收起 | |
| MALEIC MODIFIED GLYCEROL ESTER OF GUM ROSIN 130 (PM-004) | PT. NASCO | MALEIC MODIFIED GLYCEROL ESTER OF GUM ROSIN 130 is an oil soluble resin that is a glycerol ester of Gum Rosin modified using Maleic Anhydride. It is a hard thermoplastic resin that offers excellent solubility, good solvent evaporation, and low viscosity i...展開 MALEIC MODIFIED GLYCEROL ESTER OF GUM ROSIN 130 is an oil soluble resin that is a glycerol ester of Gum Rosin modified using Maleic Anhydride. It is a hard thermoplastic resin that offers excellent solubility, good solvent evaporation, and low viscosity in solutions used in formulating Nitrocellulose based formulations. It exhibits good hardness, high gloss and vest fest drying speed. 收起 | |
| Miradull™ E | Lawter | Miradull™ E is an overprint varnish from rosin-based resins, matting agents, alkyd resins, driers, waxes and mineral distillates. It has high rub and "polish" resistance, with a high amount of matting. It is fast drying and setting with low yellowing pro...展開 Miradull™ E is an overprint varnish from rosin-based resins, matting agents, alkyd resins, driers, waxes and mineral distillates. It has high rub and "polish" resistance, with a high amount of matting. It is fast drying and setting with low yellowing properties. The product is used in offset inks, sheet-fed and heatset inks. 收起 | |
| Miraglaze™ 1810 Base E | Lawter | Miraglaze™ 1810 Base E is an overprint varnish base from rosin-based resins and mineral distillates that have no driers or waxes. It has a high gloss, is fast drying and fast setting with good rub resistance. There is little yellowing, while leveling and ...展開 Miraglaze™ 1810 Base E is an overprint varnish base from rosin-based resins and mineral distillates that have no driers or waxes. It has a high gloss, is fast drying and fast setting with good rub resistance. There is little yellowing, while leveling and tack stability are good. The product has applications in offset inks and overprint varnishes. 收起 | |
| Miraglaze™ 3100 E | Lawter | Miraglaze™ 3100 E is a satin overprint varnish from rosin-based resins, soya beans, tung oils and mineral distillates. It also contains matting agents, waxes and driers and has the benefit of a fast setting with a satin finish. It also possesses rheologic...展開 Miraglaze™ 3100 E is a satin overprint varnish from rosin-based resins, soya beans, tung oils and mineral distillates. It also contains matting agents, waxes and driers and has the benefit of a fast setting with a satin finish. It also possesses rheological and tack stability with good hardness and rub resistance properties. The product has application as a satin overprint varnish and uses in offset printing inks. 收起 | |
| Miraglaze™ 8834 Base E | Lawter | Miraglaze™ 8834 Base E is an overprint varnish from rosin-based resins, mineral distillates and tung oil. It contains wax, but not driers and has the benefit of a high gloss with fast drying and setting behavior. It also has good tack stability and rub re...展開 Miraglaze™ 8834 Base E is an overprint varnish from rosin-based resins, mineral distillates and tung oil. It contains wax, but not driers and has the benefit of a high gloss with fast drying and setting behavior. It also has good tack stability and rub resistance and is used in offset inks and can be applied in wet-on-wet and wet-on-dry techniques. 收起 | |
| Miraglaze™ 8909 Base E | Lawter | Miraglaze™ 8909 Base E is an overprint varnish base from rosin resins, tung oil, DCO, mineral distillates and gelling agents with the addition of wax, but not driers. It has a high gloss, is fast drying and setting with good tack stability and leveling. T...展開 Miraglaze™ 8909 Base E is an overprint varnish base from rosin resins, tung oil, DCO, mineral distillates and gelling agents with the addition of wax, but not driers. It has a high gloss, is fast drying and setting with good tack stability and leveling. The product is common in overset inks and can be used as a wet-on-wet or wet-on-dry application. 收起 | |
| Pentaerythritol | Hainan Zhongxin Chemical Co., Ltd. | Pentaerythritol is synonymous with 2,2-Bis(hydroxymethyl) 1,3-propanediol;Tetrakis(hydroxymethyl)methane and contains 95% Monopentaerythritol. It is primarily used as an additive for short, medium and long oil alkyd resins for the production of inks and p...展開 Pentaerythritol is synonymous with 2,2-Bis(hydroxymethyl) 1,3-propanediol;Tetrakis(hydroxymethyl)methane and contains 95% Monopentaerythritol. It is primarily used as an additive for short, medium and long oil alkyd resins for the production of inks and paints. 收起 | |
| PENTAERYTHRITOL ESTER OF GUM ROSIN 100 (PM-005) | PT. NASCO | PENTAERYTHRITOL ESTER OF GUM ROSIN 100 is a high softening point thermoplastic resin made of Gum Rosin and Pentaerythritol. It is soluble in aromatic solvents, aliphatic hydrocarbon solvents, esters, ketones, and chlorinated solvents, however, it is insol...展開 PENTAERYTHRITOL ESTER OF GUM ROSIN 100 is a high softening point thermoplastic resin made of Gum Rosin and Pentaerythritol. It is soluble in aromatic solvents, aliphatic hydrocarbon solvents, esters, ketones, and chlorinated solvents, however, it is insoluble in methanol, ethanol, isopropanol, and water. It is well suited for the adhesive industry due to is weak odor, excellent heat stability and great adhesion properties and also it’s compatibility with many kinds of polymers. 收起 | |
| Polimelt P102 | Respol Resinas | Polimelt P102 is a tail oil rosin ester that can be used in road marking inks. This product has a softening point between 100-106 degrees Celsius and is designed for formulations with good resistance to thermal degradation and good oxidation stability. ...展開 Polimelt P102 is a tail oil rosin ester that can be used in road marking inks. This product has a softening point between 100-106 degrees Celsius and is designed for formulations with good resistance to thermal degradation and good oxidation stability. Its acid value is less than 15 mg of potassium hydroxide per gram. 收起 | |
| RA100 | Guangxi Zhongchang Resin Co., Ltd. | RA100 is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesiv...展開 RA100 is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink, paints and electronic flux. It contains a softening point of less than or equal to 100ºC and an acid number less than or equal to 190 mgKOH/g. 收起 | |
| RA100W | Guangxi Zhongchang Resin Co., Ltd. | RA100W is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesi...展開 RA100W is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink, paints and electronic flux. It contains a softening point of less than or equal to 100ºC and an acid number less than or equal to 190 mgKOH/g. 收起 | |
| RA120 | Guangxi Zhongchang Resin Co., Ltd. | RA120 is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesiv...展開 RA120 is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink, paints and electronic flux. It contains a softening point of less than or equal to 120ºC and an acid number less than or equal to 210 mgKOH/g. 收起 | |
| RA120W | Guangxi Zhongchang Resin Co., Ltd. | RA120W is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesi...展開 RA120W is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink, paints and electronic flux. It contains a softening point of less than or equal to 120ºC and an acid number less than or equal to 210 mgKOH/g. 收起 | |
| RA140 | Guangxi Zhongchang Resin Co., Ltd. | RA140 is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesiv...展開 RA140 is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink, paints and electronic flux. It contains a softening point of less than or equal to 140ºC and an acid number less than or equal to 145 mgKOH/g. 收起 | |
| RA140W | Guangxi Zhongchang Resin Co., Ltd. | RA140W is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesi...展開 RA140W is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink, paints and electronic flux. It contains a softening point of less than or equal to 140ºC and an acid number less than or equal to 145 mgKOH/g. 收起 | |
| RA90 | Guangxi Zhongchang Resin Co., Ltd. | RA90 is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesive...展開 RA90 is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink, paints and electronic flux. It contains a softening point of less than or equal to 90ºC and an acid number less than or equal to 180 mgKOH/g. 收起 | |
| RA90W | Guangxi Zhongchang Resin Co., Ltd. | RA90W is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesiv...展開 RA90W is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink, paints and electronic flux. It contains a softening point of less than or equal to 90ºC and an acid number less than or equal to 180 mgKOH/g. 收起 | |
| Redur MA 40 | Respol Resinas | Redur MA 40 is a fumaric resin esterified adduct that can be used in wetting and dispersion applications for lithographic inks. This product has low viscosity and high gloss. Its softening point ranges between 140-150 degrees Celsius and its acid value ...展開 Redur MA 40 is a fumaric resin esterified adduct that can be used in wetting and dispersion applications for lithographic inks. This product has low viscosity and high gloss. Its softening point ranges between 140-150 degrees Celsius and its acid value is greater than 250 mg of potassium hydroxide per gram. 收起 | |
| Redur MA 50 | Respol Resinas | Redur MA 50 is a fumaric resin esterified adduct that can be used in flexographic and lithographic inks that are soluble in water or a water/alcohol mixture. This product's softening point ranges between 145-165 degrees Celsius and its acid value ranges ...展開 Redur MA 50 is a fumaric resin esterified adduct that can be used in flexographic and lithographic inks that are soluble in water or a water/alcohol mixture. This product's softening point ranges between 145-165 degrees Celsius and its acid value ranges between 185-215 mg of potassium hydroxide per gram. 收起 | |
| Redur MA 60 | Respol Resinas | Redur MA 60 is a fumaric resin esterified adduct that can be used in nitrocellulose or oleoresinous varnishes and nitrosynthetic lithographic inks. This product's softening point ranges between 100-110 degrees Celsius and its acid value ranges between 14...展開 Redur MA 60 is a fumaric resin esterified adduct that can be used in nitrocellulose or oleoresinous varnishes and nitrosynthetic lithographic inks. This product's softening point ranges between 100-110 degrees Celsius and its acid value ranges between 14-22 mg of potassium hydroxide per gram. 收起 | |
| Redur MA 80 | Respol Resinas | Redur MA 80 is a resin that can be used in coatings. This product confers high gloss, good hardness, and water- and UV-resistance. Its softening point ranges between 100-120 degrees Celsius and its acid value ranges between 15-25 mg of potassium hydroxi...展開 Redur MA 80 is a resin that can be used in coatings. This product confers high gloss, good hardness, and water- and UV-resistance. Its softening point ranges between 100-120 degrees Celsius and its acid value ranges between 15-25 mg of potassium hydroxide per gram. 收起 | |
| Redur MA 820 | Respol Resinas | Redur MA 820 is a fumaric resin esterified adduct that can be used in flexographic lithographic inks that are soluble in water or a water/alcohol mix. This product's softening point ranges between 135-145 degrees Celsius and its acid value ranges between...展開 Redur MA 820 is a fumaric resin esterified adduct that can be used in flexographic lithographic inks that are soluble in water or a water/alcohol mix. This product's softening point ranges between 135-145 degrees Celsius and its acid value ranges between 185-215 mg of potassium hydroxide per gram. 收起 | |
| Resink R1052 | Respol Resinas | Resink R1052 is a phenolic modified rosin ester that can be used in sheet-fed inks and varnishes. This product's cloud point ranges between 110-125 degrees Celsius and it contains 45% solids. Its viscosity ranges between 40-55 Pas. | |
| Resink R1053 | Respol Resinas | Resink R1053 is a phenolic modified rosin ester that can be used in sheet-fed inks and varnishes. This product's cloud point ranges between 125-140 degrees Celsius and it contains 45% solids. Its viscosity ranges between 40-55 Pas. | |
| Resink R1054 | Respol Resinas | Resink R1054 is a phenolic modified rosin ester that can be used in sheet-fed inks and varnishes. This product is compatible with aromatic oils. Its cloud point ranges between 115 and 135 degrees Celsius and it contains 40% solids. | |
| Resink R1255 | Respol Resinas | Resink R1255 is a phenol formaldehyde-free rosin ester that can be used in offset printing inks and varnishes. This product is a low-viscosity resin designed for heatset and sheetfed applications. Its cloud point ranges between 60-80 degrees Celsius and...展開 Resink R1255 is a phenol formaldehyde-free rosin ester that can be used in offset printing inks and varnishes. This product is a low-viscosity resin designed for heatset and sheetfed applications. Its cloud point ranges between 60-80 degrees Celsius and it contains 45% solids. 收起 | |
| Resink R1712 | Respol Resinas | Resink R1712 is a phenolic modified rosin ester that can be used in sheetfed inks, varnishes, and overprint varnishes. This product has high solubility with low viscosities and is also suitable for grinding media. Its cloud point ranges between 65-85 de...展開 Resink R1712 is a phenolic modified rosin ester that can be used in sheetfed inks, varnishes, and overprint varnishes. This product has high solubility with low viscosities and is also suitable for grinding media. Its cloud point ranges between 65-85 degrees Celsius and contains 55% solids. 收起 | |
| Resink R2024 | Respol Resinas | Resink R2024 is a phenolic modified rosin ester that can be used in sheet-fed or heatset inks and varnishes. This product has a medium viscosity and its cloud point ranges between 120-140 degrees Celsius. It contains 45% solids. | |
| Resink R2034 | Respol Resinas | Resink R2034 is a phenolic modified rosin ester that can be used in sheetfed or heatset inks and varnishes. This product is a low viscosity resin whose cloud point ranges between 130-140 degrees Celsius, and it contains 45% solids. | |
| Resink R2038 | Respol Resinas | Resink R2038 is a phenolic modified rosin ester that can be used in web offset, heatset, or coldset inks. This product is a medium to high viscosity resin with high solubility that wets pigments well. Its cloud point ranges between 115-125 degrees Celsi...展開 Resink R2038 is a phenolic modified rosin ester that can be used in web offset, heatset, or coldset inks. This product is a medium to high viscosity resin with high solubility that wets pigments well. Its cloud point ranges between 115-125 degrees Celsius and it contains 40% solids. 收起 | |
| Resink R2104 | Respol Resinas | Resink R2104 is a phenolic modified rosin ester that can be used in sheetfed or heatset inks and in varnishes. This product is a medium viscosity resin whose cloud point ranges between 115-135 degrees Celsius, and it contains 45% solids. | |
| Resink R3005 | Respol Resinas | Resink R3005 is a phenolic modified rosin ester that can be used in sheetfed or heatset inks and varnishes. This product is a medium-viscosity resin that self-gels. Its cloud point ranges between 110-130 degrees Celsius and it contains 40% solids. | |
| Resink R3024 | Respol Resinas | Resink R3024 is a phenol formaldehyde-free rosin ester that can be used in offset printing inks and varnishes. This product has a medium viscosity, structure and solubility with high gloss properties. It is designed for sheetfed offset inks. Its cloud ...展開 Resink R3024 is a phenol formaldehyde-free rosin ester that can be used in offset printing inks and varnishes. This product has a medium viscosity, structure and solubility with high gloss properties. It is designed for sheetfed offset inks. Its cloud point ranges between 85-95 degrees Celsius and it contains 50% solids. 收起 | |
| Resink R3084 | Respol Resinas | Resink R3084 is a phenolic modified rosin ester that can be used in sheetfed or heatset inks and in varnishes. This product's cloud point ranges between 90-105 degrees Celsius and it contains 35% solids. | |
| Resink R3085 | Respol Resinas | Resink R3085 is a phenolic modified rosin ester that can be used in sheetfed or heatset inks, news inks, and in varnishes. This product is a structured resin with a very high viscosity. Its cloud point ranges between 75-90 degrees Celsius and it contain...展開 Resink R3085 is a phenolic modified rosin ester that can be used in sheetfed or heatset inks, news inks, and in varnishes. This product is a structured resin with a very high viscosity. Its cloud point ranges between 75-90 degrees Celsius and it contains 35% solids. 收起 | |
| Resink R3191 | Respol Resinas | Resink R3191 is a phenol formaldehyde-free rosin ester that can be used in offset printing inks and varnishes. This product has high viscosity, low odor and very high gloss. It sets quickly with low solubility and is designed for sheetfed offset inks an...展開 Resink R3191 is a phenol formaldehyde-free rosin ester that can be used in offset printing inks and varnishes. This product has high viscosity, low odor and very high gloss. It sets quickly with low solubility and is designed for sheetfed offset inks and overprint varnishes. Its cloud point ranges between 145-155 degrees Celsius and it contains 45% solids. 收起 | |
| Resink R3193 | Respol Resinas | Resink R3193 is a phenol formaldehyde-free rosin ester that can be used in offset printing inks and overprint varnishes. This product is a high viscosity resin with good solvent release and compatibility with phenolic or hydrocarbon resins. Its cloud po...展開 Resink R3193 is a phenol formaldehyde-free rosin ester that can be used in offset printing inks and overprint varnishes. This product is a high viscosity resin with good solvent release and compatibility with phenolic or hydrocarbon resins. Its cloud point ranges between 140-160 degrees Celsius and it contains 42.5% solids. 收起 | |
| Resink R3252 | Respol Resinas | Resink R3252 is a phenolic modified rosin ester that can be used in sheetfed or heatset inks, news inks, and in varnishes. This product is a structured resin with a very high viscosity. Its cloud point ranges between 80-95 degrees Celsius and it contain...展開 Resink R3252 is a phenolic modified rosin ester that can be used in sheetfed or heatset inks, news inks, and in varnishes. This product is a structured resin with a very high viscosity. Its cloud point ranges between 80-95 degrees Celsius and it contains 40% solids. 收起 | |
| Resink R3262 | Respol Resinas | Resink R3262 is a phenolic rosin modified ester that can be used in sheet-fed inks, heatset inks, news inks, and in varnishes. This product is a structured resin with a very high viscosity. Its cloud point ranges between 80-90 degrees Celsius and it con...展開 Resink R3262 is a phenolic rosin modified ester that can be used in sheet-fed inks, heatset inks, news inks, and in varnishes. This product is a structured resin with a very high viscosity. Its cloud point ranges between 80-90 degrees Celsius and it contains 35% solids. 收起 | |
| Resink R3263 | Respol Resinas | Resink R3263 is a phenolic rosin modified ester that can be used in sheet-fed inks, heatset inks, news inks, and in varnishes. This product is a structured resin with a very high viscosity. Its cloud point ranges between 70-85 degrees Celsius and it con...展開 Resink R3263 is a phenolic rosin modified ester that can be used in sheet-fed inks, heatset inks, news inks, and in varnishes. This product is a structured resin with a very high viscosity. Its cloud point ranges between 70-85 degrees Celsius and it contains 35% solids. 收起 | |
| Resink R3295 | Respol Resinas | Resink R3295 is a phenolic rosin modified ester that can be used in sheet-fed inks, heatset inks, news inks, and in varnishes. This product is a structured resin with a very high viscosity. Its cloud point ranges between 80-100 degrees Celsius and it co...展開 Resink R3295 is a phenolic rosin modified ester that can be used in sheet-fed inks, heatset inks, news inks, and in varnishes. This product is a structured resin with a very high viscosity. Its cloud point ranges between 80-100 degrees Celsius and it contains 35% solids. 收起 | |
| Resink R4017 | Respol Resinas | Resink R4017 is a phenolic hybrid resin with hydrocarbon modification that can be used in offset printing inks, news inks, heatset inks, and varnishes. This product has very low viscosity and a high solubility. Its cloud point ranges between 70-80 degre...展開 Resink R4017 is a phenolic hybrid resin with hydrocarbon modification that can be used in offset printing inks, news inks, heatset inks, and varnishes. This product has very low viscosity and a high solubility. Its cloud point ranges between 70-80 degrees Celsius and it contains 47.5% solids. 收起 | |
| Resink R4025 | Respol Resinas | Resink R4025 is a phenolic hybrid rosin resin with hydrocarbon modification that can be used in offset printing inks, heatset inks, sheetfed and coldset inks for fast running presses. This product has high viscosity and high solubility. Its cloud point ...展開 Resink R4025 is a phenolic hybrid rosin resin with hydrocarbon modification that can be used in offset printing inks, heatset inks, sheetfed and coldset inks for fast running presses. This product has high viscosity and high solubility. Its cloud point ranges between 80-100 degrees Celsius and it contains 40% solids. 收起 | |
| Resink R4029 | Respol Resinas | Resink R4029 is a phenolic hybrid rosin resin with hydrocarbon modification that can be used in sheetfed, heatset, news inks, offset printing inks, and varnishes. This product is a structured hydrocarbon-based resin with very high viscosity. Its cloud p...展開 Resink R4029 is a phenolic hybrid rosin resin with hydrocarbon modification that can be used in sheetfed, heatset, news inks, offset printing inks, and varnishes. This product is a structured hydrocarbon-based resin with very high viscosity. Its cloud point ranges between 75-90 degrees Celsius and it contains 35% solids. 收起 | |
| Resink R4046 | Respol Resinas | Resink R4046 is a phenolic modified rosin ester that can be used in sheetfed or heatset inks, news inks, and varnishes. This product is a highly structured resin with a very high viscosity. Its cloud point ranges between 100-120 degrees Celsius and it c...展開 Resink R4046 is a phenolic modified rosin ester that can be used in sheetfed or heatset inks, news inks, and varnishes. This product is a highly structured resin with a very high viscosity. Its cloud point ranges between 100-120 degrees Celsius and it contains 35% solids. 收起 | |
| Resink R4189 | Respol Resinas | Resink R4189 is a phenolic modified rosin ester that can be used in sheet-fed or heatset inks, news inks, and in varnishes. This product is a structured resin with an extremely high viscosity. Its cloud point ranges between 165-185 degrees Celsius and i...展開 Resink R4189 is a phenolic modified rosin ester that can be used in sheet-fed or heatset inks, news inks, and in varnishes. This product is a structured resin with an extremely high viscosity. Its cloud point ranges between 165-185 degrees Celsius and it contains 35% solids. 收起 | |
| Resink R4247 | Respol Resinas | Resink R4247 is a phenolic modified rosin ester that can be used in sheetfed or heatset inks, news inks, and in varnishes. This product is a highly structured resin with a very high viscosity. Its cloud point ranges between 110-130 degrees Celsius and i...展開 Resink R4247 is a phenolic modified rosin ester that can be used in sheetfed or heatset inks, news inks, and in varnishes. This product is a highly structured resin with a very high viscosity. Its cloud point ranges between 110-130 degrees Celsius and it contains 35% solids. 收起 | |
| Resink R4252T | Respol Resinas | Resinks R4252T is a phenolic modified rosin ester that can be used in sheetfed or heatset inks and in varnishes. This product is a transesterified phenolic resin with a medium viscosity. Its cloud point ranges between 85-105 degrees Celsius and it conta...展開 Resinks R4252T is a phenolic modified rosin ester that can be used in sheetfed or heatset inks and in varnishes. This product is a transesterified phenolic resin with a medium viscosity. Its cloud point ranges between 85-105 degrees Celsius and it contains 40% solids. 收起 |
