| 12-Hydroxy Stearic Acid (12-HSA) | Castor International BV | 12-Hydroxy Stearic Acid (12-HSA) is a saturated hydroxyl fatty acid that is a hard, waxy, cream colored product in the form of flakes or powder, and is nearly tasteless and odorless. 12-HSA reacts with acrylic esters to produce durable, hard thermosetting...展開 12-Hydroxy Stearic Acid (12-HSA) is a saturated hydroxyl fatty acid that is a hard, waxy, cream colored product in the form of flakes or powder, and is nearly tasteless and odorless. 12-HSA reacts with acrylic esters to produce durable, hard thermosetting polymers used as a coating in metal decorative finishes, industrial appliance, and high quality automotive, and is a useful component in hot-melt adhesives, inks, and polishes. 收起 | |
| Atrelux UV100 | Atcoat GmbH | Atrelux UV100 is a radiation curring polyester acyrylate, modified with natural fatty acids, suitable for top coats, fillers and primers. This product has good adhesion on wood, and is also recommended for printing inks. Atrelux UV100 has a solid of 100% ...展開 Atrelux UV100 is a radiation curring polyester acyrylate, modified with natural fatty acids, suitable for top coats, fillers and primers. This product has good adhesion on wood, and is also recommended for printing inks. Atrelux UV100 has a solid of 100% and a viscosity of 40 to 60 sec. 收起 | |
| Atrepol P20 | Atcoat GmbH | Atrepol P20 is a saturated poly ester color stable resin with extremely low viscosity for impregnations, printing inks, stains, lacquers, reactive, wood treatment oils, and is environmentally friendly. Atrepol P20 has a solid of 100% and a viscosity of 60...展開 Atrepol P20 is a saturated poly ester color stable resin with extremely low viscosity for impregnations, printing inks, stains, lacquers, reactive, wood treatment oils, and is environmentally friendly. Atrepol P20 has a solid of 100% and a viscosity of 60 to 80 sec. 收起 | |
| Atresal LO 62 | Atcoat GmbH | Atresal LO 62 is a long oil alkyd resin, consisting of cocos, suitable for non-yellowing and low odor overprint inks and varnishes. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal LO 62 has an oil length...展開 Atresal LO 62 is a long oil alkyd resin, consisting of cocos, suitable for non-yellowing and low odor overprint inks and varnishes. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal LO 62 has an oil length of 62, a solid of 100%, and a viscosity of 0.5 to 1.2 Pas. 收起 | |
| Atresal LO 900 | Atcoat GmbH | Atresal LO 900 is a long oil alkyd resin, consisting of soya, suitable for the formulation of printing inks with fast drying and good adhesion. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal LO 900 has ...展開 Atresal LO 900 is a long oil alkyd resin, consisting of soya, suitable for the formulation of printing inks with fast drying and good adhesion. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal LO 900 has an oil length of 72, a solid of 100%, and a viscosity of 50 to 70 mPas (20°C). 收起 | |
| Atresal LO 950 | Atcoat GmbH | Atresal LO 950 is a long oil alkyd resin, consisting of linseed, suitable for the formulation of printing inks with fast drying and good adhesion. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal LO 950 h...展開 Atresal LO 950 is a long oil alkyd resin, consisting of linseed, suitable for the formulation of printing inks with fast drying and good adhesion. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal LO 950 has an oil length of 72, a solid of 100%, and a viscosity of 700 to 1500 mPas (80°C). 收起 | |
| Atresal LO 960 | Atcoat GmbH | Atresal LO 960 is a long oil alkyd resin, consisting of linseed, suitable for the formulation of printing inks with good adhesion. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal LO 960 has an oil length...展開 Atresal LO 960 is a long oil alkyd resin, consisting of linseed, suitable for the formulation of printing inks with good adhesion. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal LO 960 has an oil length of 72, a solid of 100%, and a viscosity of 1200 to 2500 mPas (80°C). 收起 | |
| Atresoil L2 | Atcoat GmbH | Atresoil L2 is a stand oil and boiled oil, consisting of linseed oil, with good pigment wetting, dehydrate with luminous surface, increase weather resistance, and enhance the flow, which is suitable for pigment pastes, natural paints, painting materials, ...展開 Atresoil L2 is a stand oil and boiled oil, consisting of linseed oil, with good pigment wetting, dehydrate with luminous surface, increase weather resistance, and enhance the flow, which is suitable for pigment pastes, natural paints, painting materials, and printing inks. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresoil L2 has an oil length of 100, a solid of 100% and a viscosity of 170 to 250 mPas. 收起 | |
| Atresoil L200 | Atcoat GmbH | Atresoil L200 is a stand oil and boiled oil, consisting of linseed oil, with good pigment wetting, dehydrate with luminous surface, increase weather resistance, and enhance the flow, which is suitable for pigment pastes, natural paints, painting materials...展開 Atresoil L200 is a stand oil and boiled oil, consisting of linseed oil, with good pigment wetting, dehydrate with luminous surface, increase weather resistance, and enhance the flow, which is suitable for pigment pastes, natural paints, painting materials, and printing inks. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresoil L200 has an oil length of 100, a solid of 100% and a viscosity of 17000 to 25000 mPas. 收起 | |
| Atresoil L6 | Atcoat GmbH | Atresoil L6 is a stand oil and boiled oil, consisting of linseed oil, with good pigment wetting, dehydrate with luminous surface, increase weather resistance, and enhance the flow, which is suitable for pigment pastes, natural paints, painting materials, ...展開 Atresoil L6 is a stand oil and boiled oil, consisting of linseed oil, with good pigment wetting, dehydrate with luminous surface, increase weather resistance, and enhance the flow, which is suitable for pigment pastes, natural paints, painting materials, and printing inks. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresoil L6 has an oil length of 100, a solid of 100% and a viscosity of 570 to 650 mPas. 收起 | |
| Blown Castor Oil (BCO) | Castor International BV | Blown Castor Oil (BCO) (also known as: oxidized castor oil, polymerized castor oil, caster stand oil) is a golden yellow to honey colored viscous liquid. Blown Castor Oil (BCO) has an acid value of 3 to 25 mg KOH/g and a viscosity of 15 to 17 Poise. There...展開 Blown Castor Oil (BCO) (also known as: oxidized castor oil, polymerized castor oil, caster stand oil) is a golden yellow to honey colored viscous liquid. Blown Castor Oil (BCO) has an acid value of 3 to 25 mg KOH/g and a viscosity of 15 to 17 Poise. There are numerous applications in various industrial segments, such as adhesives (hot-melt and solution): plasticizer and coupling solvent for resins and modifiers; inks: resin and binder plasticizer, medium for dispersion of pigments and dyes; sealants and caulks: flexibility, penetration, adhesion. 收起 | |
| Dehydrated Castor Oil (DCO), Commercial Grade | Castor International BV | Dehydrated Castor Oil (DCO), Commercial Grade, is created when approximately 5% of the chemically combined water has been removed. Its drying properties are similar to those of Tung oil. Heating the oil in the presence of catalysts such as clays and metal...展開 Dehydrated Castor Oil (DCO), Commercial Grade, is created when approximately 5% of the chemically combined water has been removed. Its drying properties are similar to those of Tung oil. Heating the oil in the presence of catalysts such as clays and metal oxides, phosphoric acid, and sulfuric acid, is where dehydration is carried out. Dehydrated Castor Oil (DCO), Commercial Grade has a characteristic odor and is a yellow oily liquid. It has an acid value of 6 mg KOH/g max and a Poise viscosity (25°C) of 1.6 to 2.8. Dehydrated castor oil is a unique drying oil, which imparts fine gloss, toughness, good flexibility, adhesion, chemical and water resistance to the dry paint film with non-yellowing properties. DCO is a very suitable for Linseed oil. Using DCO with paints offer superior finish and are super white. Applications are as a primary binder for enamels, house paints, sealants, caulks, and inks. 收起 | |
| Dehydrated Castor Oil (DCO), Pale Grade | Castor International BV | Dehydrated Castor Oil (DCO), Pale Grade, is created when approximately 5% of the chemically combined water has been removed. Its drying properties are similar to those of Tung oil. Heating the oil in the presence of catalysts such as clays and metal oxide...展開 Dehydrated Castor Oil (DCO), Pale Grade, is created when approximately 5% of the chemically combined water has been removed. Its drying properties are similar to those of Tung oil. Heating the oil in the presence of catalysts such as clays and metal oxides, phosphoric acid, and sulfuric acid, is where dehydration is carried out. Dehydrated Castor Oil (DCO), Pale Grade has a characteristic odor and is a yellow oily liquid. It has a Poise viscosity (25°C) of 1.6 to 2.8. Dehydrated castor oil is a unique drying oil, which imparts fine gloss, toughness, good flexibility, adhesion, and chemical and water resistance to the dry paint film with non-yellowing properties. DCO is a very suitable for Linseed oil. Using DCO with paints offer superior finish and are super white. Applications are as a primary binder for enamels, house paints, sealants, caulks, and inks. 收起 | |
| Dehydrated Castor Oil (DCO), Special Grade | Castor International BV | Dehydrated Castor Oil (DCO), Special Grade, is created when approximately 5% of the chemically combined water has been removed. Its drying properties are similar to those of Tung oil. Heating the oil in the presence of catalysts such as clays and metal ox...展開 Dehydrated Castor Oil (DCO), Special Grade, is created when approximately 5% of the chemically combined water has been removed. Its drying properties are similar to those of Tung oil. Heating the oil in the presence of catalysts such as clays and metal oxides, phosphoric acid, and sulfuric acid, is where dehydration is carried out. Dehydrated Castor Oil (DCO), Special Grade has a characteristic odor and is a yellow oily liquid. It has an acid value of 4 mg KOH/g max and a Poise viscosity (25°C) of 1.6 to 2.8. Dehydrated castor oil is a unique drying oil, which imparts fine gloss, toughness, good flexibility, adhesion, and chemical and water resistance to the dry paint film with non-yellowing properties. DCO is a very suitable for Linseed oil. Using DCO with paints offer superior finish and are super white. Applications are as a primary binder for enamels, house paints, sealants, caulks, and inks. 收起 | |
| Dehydrated Castor Oil Fatty Acid (DCOFA), High | Castor International BV | Dehydrated Castor Oil Fatty Acid (DCOFA), Medium is a high diene fatty acid. DCOFA is a liquid that has a white to pale yellow color. Its linoleic acid (non-conjugated) is 25% to 30%, linoleic acid (conjugated) is 60% to 66%, and the conjugation by UV spe...展開 Dehydrated Castor Oil Fatty Acid (DCOFA), Medium is a high diene fatty acid. DCOFA is a liquid that has a white to pale yellow color. Its linoleic acid (non-conjugated) is 25% to 30%, linoleic acid (conjugated) is 60% to 66%, and the conjugation by UV spectrometer of 50 min. Dehydrated castor oil fatty acid based alkyd resins and polyamides make up superior constituent in numerous print inks and paint formulations. DCOFA is also used in the manufacture of high solid alkyds, acrylic and epoxy ester resins, which are useful for appliance finishes, automotive topcoats, coil coatings, primers, interior and exterior can coatings, tube coatings, overprint varnishes, marine finishes and high-speed printing inks. 收起 | |
| Dehydrated Castor Oil Fatty Acid (DCOFA), Low | Castor International BV | Dehydrated Castor Oil Fatty Acid (DCOFA), Low is a high diene fatty acid. DCOFA is a liquid that has a white to pale yellow color. Its linoleic acid (non-conjugated) is 45% to 55%, linoleic acid (conjugated) is 35% to 45%, and the conjugation by UV spectr...展開 Dehydrated Castor Oil Fatty Acid (DCOFA), Low is a high diene fatty acid. DCOFA is a liquid that has a white to pale yellow color. Its linoleic acid (non-conjugated) is 45% to 55%, linoleic acid (conjugated) is 35% to 45%, and the conjugation by UV spectrometer of 50 min. Dehydrated castor oil fatty acid based alkyd resins and polyamides make up superior constituent in numerous print inks and paint formulations. DCOFA is also used in the manufacture of high solid alkyds, acrylic and epoxy ester resins, which are useful for appliance finishes, automotive topcoats, coil coatings, primers, interior and exterior can coatings, tube coatings, overprint varnishes, marine finishes and high-speed printing inks. 收起 | |
| Dehydrated Castor Oil Fatty Acid (DCOFA), Medium | Castor International BV | Dehydrated Castor Oil Fatty Acid (DCOFA), Medium is a high diene fatty acid. DCOFA is a liquid that has a white to pale yellow color. Its linoleic acid (non-conjugated) is 30% to 45%, linoleic acid (conjugated) is 45% to 60%, and the conjugation by UV spe...展開 Dehydrated Castor Oil Fatty Acid (DCOFA), Medium is a high diene fatty acid. DCOFA is a liquid that has a white to pale yellow color. Its linoleic acid (non-conjugated) is 30% to 45%, linoleic acid (conjugated) is 45% to 60%, and the conjugation by UV spectrometer of 50 min. Dehydrated castor oil fatty acid based alkyd resins and polyamides make up superior constituent in numerous print inks and paint formulations. DCOFA is also used in the manufacture of high solid alkyds, acrylic and epoxy ester resins, which are useful for appliance finishes, automotive topcoats, coil coatings, primers, interior and exterior can coatings, tube coatings, overprint varnishes, marine finishes and high-speed printing inks. 收起 | |
| Fumaric Acid | Bartek Ingredients Inc. | Fumaric Acid is an organic, non-hygroscopic white crystal. It is made from N-butane that is oxidized into maleic acid which is then isomerized into fumaric acid. It finds application in printing inks. | |
| Hydrogenated Castor Oil (HCO) | Castor International BV | Hydrogenated Castor Oil (HCO) is a compound attained by the hydrogenation of refined castor oil. It is a hard, waxy, white to cream colored product with a high melting point of 83 to 87 C°, and is nearly tasteless and odorless. There are numerous applicat...展開 Hydrogenated Castor Oil (HCO) is a compound attained by the hydrogenation of refined castor oil. It is a hard, waxy, white to cream colored product with a high melting point of 83 to 87 C°, and is nearly tasteless and odorless. There are numerous applications in various industrial segments, such as a slip additive in paints, plastics (PE), and inks and as a dispersing agent in carbon papers, inks, and plastic color master batches and as a dispersing additive and flow control in sealants, hot-melt adhesives, powder coatings, and more. 收起 | |
| Ricinoleic Acid (RA) | Castor International BV | Ricinoleic Acid (RA), prepared from castor oil, is an unsaturated fatty acid viscous liquid that has a clear, yellowish appearance and an acid value of 175 mg KOH/g min. There are numerous applications in various industrial segments, such as soaps: metal ...展開 Ricinoleic Acid (RA), prepared from castor oil, is an unsaturated fatty acid viscous liquid that has a clear, yellowish appearance and an acid value of 175 mg KOH/g min. There are numerous applications in various industrial segments, such as soaps: metal working fluids, cutting oils, emulsifiers, and industrial lubricants; Surface coating: used as a pigment/dye dispersants in plastics, inks, coatings, etc.; Textiles: providing surface wetting and lubricity, and polarity. 收起 | |
| Sulphonated Castor Oil (SCO) | Castor International BV | Sulphonated Castor Oil (SCO), an anionic surfactant, has a purity of 75% with a non-volatile content of 70 to 85% and free fatty acid of 30 % max. It has many applications where it functions as a dispersing agent, detergent, wetting agent, and leveling ag...展開 Sulphonated Castor Oil (SCO), an anionic surfactant, has a purity of 75% with a non-volatile content of 70 to 85% and free fatty acid of 30 % max. It has many applications where it functions as a dispersing agent, detergent, wetting agent, and leveling agent. Sulphonated Castor Oil (SCO) is used as a dispersion and pigment wetting application in the paint industry, and as leveling and dye dispersion in the inks industry, among others. 收起 |
