| 12-Hydroxy Stearic Acid (12-HSA) | Castor International BV | 12-Hydroxy Stearic Acid (12-HSA) is a saturated hydroxyl fatty acid that is a hard, waxy, cream colored product in the form of flakes or powder, and is nearly tasteless and odorless. 12-HSA reacts with acrylic esters to produce durable, hard thermosetting...展開 12-Hydroxy Stearic Acid (12-HSA) is a saturated hydroxyl fatty acid that is a hard, waxy, cream colored product in the form of flakes or powder, and is nearly tasteless and odorless. 12-HSA reacts with acrylic esters to produce durable, hard thermosetting polymers used as a coating in metal decorative finishes, industrial appliance, and high quality automotive, and is a useful component in hot-melt adhesives, inks, and polishes. 收起 | |
| ATLAS™ 100 | Cabot Corporation - Additives | ATLAS™ 100 is a silica composite additive. It is comprised of hydrophobic silica and polymer in spheroid particles to deliver durability, efficiency, and print quality. It is formulated to prevent embedding, migration and separation from the toner surface...展開 ATLAS™ 100 is a silica composite additive. It is comprised of hydrophobic silica and polymer in spheroid particles to deliver durability, efficiency, and print quality. It is formulated to prevent embedding, migration and separation from the toner surface. This product is well suited for use in electrophotographic toner applications. 收起 | |
| BLACK PEARLS® 120 | Cabot Corporation - Additives | BLACK PEARLS® 120 is a regular color opacifying and tinting carbon black with low to medium weatherability. It offers good blue undertones and high loadings in masterbatches. This product is well suited for use in printing inks, toners, plastics, and coat...展開 BLACK PEARLS® 120 is a regular color opacifying and tinting carbon black with low to medium weatherability. It offers good blue undertones and high loadings in masterbatches. This product is well suited for use in printing inks, toners, plastics, and coatings. 收起 | |
| BLACK PEARLS® 160 | Cabot Corporation - Additives | BLACK PEARLS® 160 is a regular color opacifying and tinting carbon black offering good dispersability for plastic film and molding applications. This product is well suited for use in printing inks, toners, plastics, and coatings. | |
| BLACK PEARLS® 280 | Cabot Corporation - Additives | BLACK PEARLS® 280 is a general purpose, easy-to-disperse carbon black with good ultraviolet and weatherability characteristics. This product is well suited for use in printing inks, toners, plastics, and coatings. | |
| Blown Castor Oil (BCO) | Castor International BV | Blown Castor Oil (BCO) (also known as: oxidized castor oil, polymerized castor oil, caster stand oil) is a golden yellow to honey colored viscous liquid. Blown Castor Oil (BCO) has an acid value of 3 to 25 mg KOH/g and a viscosity of 15 to 17 Poise. There...展開 Blown Castor Oil (BCO) (also known as: oxidized castor oil, polymerized castor oil, caster stand oil) is a golden yellow to honey colored viscous liquid. Blown Castor Oil (BCO) has an acid value of 3 to 25 mg KOH/g and a viscosity of 15 to 17 Poise. There are numerous applications in various industrial segments, such as adhesives (hot-melt and solution): plasticizer and coupling solvent for resins and modifiers; inks: resin and binder plasticizer, medium for dispersion of pigments and dyes; sealants and caulks: flexibility, penetration, adhesion. 收起 | |
| CAB-O-SIL® EH5 | Cabot Corporation - Additives | CAB-O-SIL® EH5 is a very high surface fumed silica that can be used to provide thickening, thixotropic, and anti-settling behavior in liquid systems. It is characterized by high purity, aggregated structure, submicron particle size, low bulk density, and ...展開 CAB-O-SIL® EH5 is a very high surface fumed silica that can be used to provide thickening, thixotropic, and anti-settling behavior in liquid systems. It is characterized by high purity, aggregated structure, submicron particle size, low bulk density, and hyprophilic surface chemistry. This product is well suited for use in adhesives and sealants, coatings, and printing inks. 收起 | |
| CAB-O-SIL® TS530 | Cabot Corporation - Additives | CAB-O-SIL® TS530 is a high-purity silica that has been treated with hexamethyldisilazane to render the silica hydrophobic. It offers good rheological control, sag resistance, anti-settling, and improved dispersion. This product is well suited for use in m...展開 CAB-O-SIL® TS530 is a high-purity silica that has been treated with hexamethyldisilazane to render the silica hydrophobic. It offers good rheological control, sag resistance, anti-settling, and improved dispersion. This product is well suited for use in medium-to-high polarity inks, coatings, and adhesive applications. 收起 | |
| CAB-O-SIL® TS610 | Cabot Corporation - Additives | CAB-O-SIL® TS610 is a low surface area fumed silica that has been surface modified with dimethyldichlorosilane. As a thickener, this product is well suited for use in non-polar to medium polarity inks, coatings, and adhesives. It is also highly effective ...展開 CAB-O-SIL® TS610 is a low surface area fumed silica that has been surface modified with dimethyldichlorosilane. As a thickener, this product is well suited for use in non-polar to medium polarity inks, coatings, and adhesives. It is also highly effective as free-flow additive for moisture-sensitive powder systems. 收起 | |
| CAB-O-SPERSE® PG001 | Cabot Corporation - Additives | CAB-O-SPERSE® PG001 is a specialty fumed silica dispersion. It is formulated to provide a microporous coating for inkjet media. It can be used on both porous and non-porous media, is fast drying, has good mechanical integrity and good gloss. This product ...展開 CAB-O-SPERSE® PG001 is a specialty fumed silica dispersion. It is formulated to provide a microporous coating for inkjet media. It can be used on both porous and non-porous media, is fast drying, has good mechanical integrity and good gloss. This product is well suited for use in inkjet inks. 收起 | |
| CLiQFLOW® LED | CLiQ SwissTech (Netherlands) B.V. | CLiQFLOW® LED is a cream/beige powdered rheological additive with organically modified bentonite clay as a base. The organoclay is recommended for low to medium polar non-aqueous systems that are used in coatings, inks and adhesives. It provides good sag ...展開 CLiQFLOW® LED is a cream/beige powdered rheological additive with organically modified bentonite clay as a base. The organoclay is recommended for low to medium polar non-aqueous systems that are used in coatings, inks and adhesives. It provides good sag resistance, storage stability and a controlled shear thinning flow behavior. The product is easier to disperse than regular organoclays, allows for more flexibility in the production stage and is designed for direct incorporation into the extender and pigment grinding phase. 收起 | |
| CLiQFLOW® LP | CLiQ SwissTech (Netherlands) B.V. | CLiQFLOW® LP appears in a cream/beige powder form as a modified bentonite clay-based rheological additive. The organoclay needs a high shear activation. It is recommended for low to medium polar non-aqueous systems in inks, coatings and adhesives. It can ...展開 CLiQFLOW® LP appears in a cream/beige powder form as a modified bentonite clay-based rheological additive. The organoclay needs a high shear activation. It is recommended for low to medium polar non-aqueous systems in inks, coatings and adhesives. It can be added into the high shear grinding phase of extenders and pigments depending on the nature of polar activator used and the production conditions. 收起 | |
| CLiQSMART® 1014 | CLiQ SwissTech (Netherlands) B.V. | CLiQSMART® 1014 is an opaque liquid mineral-based defoamer used in aqueous systems. It has silica and surface-active materials to speed up the defoaming efficiency. Free of polysiloxane, it is usually applied to aqueous matt-to-gloss coating systems, varn...展開 CLiQSMART® 1014 is an opaque liquid mineral-based defoamer used in aqueous systems. It has silica and surface-active materials to speed up the defoaming efficiency. Free of polysiloxane, it is usually applied to aqueous matt-to-gloss coating systems, varnishes, wood stains, adhesives and printing inks. 收起 | |
| CLiQSMART® 1031 | CLiQ SwissTech (Netherlands) B.V. | CLiQSMART® 1031 is a pale yellow liquid 100% polyglycol defoamer used in aqueous systems. It is free of silicone and mineral oil, shows high efficiency and is usually used in low to mid gloss-pigmented aqueous coatings, ink systems and adhesives. It can b...展開 CLiQSMART® 1031 is a pale yellow liquid 100% polyglycol defoamer used in aqueous systems. It is free of silicone and mineral oil, shows high efficiency and is usually used in low to mid gloss-pigmented aqueous coatings, ink systems and adhesives. It can be used in the grinding and let-down phase of a manufacturing process. 收起 | |
| CLiQSMART® 1032 | CLiQ SwissTech (Netherlands) B.V. | CLiQSMART® 1032 is a white polygycol emulsion defoamer for aqueous systems. Free of mineral oil and silicone, it displays high efficiency and system compatibility. This product is usually applied in low to high-gloss pigmented aqueous industrial or decora...展開 CLiQSMART® 1032 is a white polygycol emulsion defoamer for aqueous systems. Free of mineral oil and silicone, it displays high efficiency and system compatibility. This product is usually applied in low to high-gloss pigmented aqueous industrial or decorative coatings, inks, and adhesives. 收起 | |
| CLiQSMART® 1051 | CLiQ SwissTech (Netherlands) B.V. | CLiQSMART® 1051 is a white polysiloxane emulsion-based defoamer used in aqueous systems. It can be used in a variety of aqueous systems where it is usually applied in gloss pigmented and clear coatings, overprint varnishes and inks. It has good balance be...展開 CLiQSMART® 1051 is a white polysiloxane emulsion-based defoamer used in aqueous systems. It can be used in a variety of aqueous systems where it is usually applied in gloss pigmented and clear coatings, overprint varnishes and inks. It has good balance between compatibility and defoaming efficiency and does not negatively impact on transparency and gloss. 收起 | |
| CLiQSPERSE® CG | CLiQ SwissTech (Netherlands) B.V. | CLiQSPERSE® CG appears as a clear brownish liquid that serves as a wetting agent for non-aqueous coatings and inks. It improves low shear viscosity, acts as a flocculant and is recommended as an organoclay activator. The product reduces pigment floating a...展開 CLiQSPERSE® CG appears as a clear brownish liquid that serves as a wetting agent for non-aqueous coatings and inks. It improves low shear viscosity, acts as a flocculant and is recommended as an organoclay activator. The product reduces pigment floating and flooding in inks and paints and improves storage stability and anti-settling behavior of solvent systems. 收起 | |
| Dehydrated Castor Oil (DCO), Commercial Grade | Castor International BV | Dehydrated Castor Oil (DCO), Commercial Grade, is created when approximately 5% of the chemically combined water has been removed. Its drying properties are similar to those of Tung oil. Heating the oil in the presence of catalysts such as clays and metal...展開 Dehydrated Castor Oil (DCO), Commercial Grade, is created when approximately 5% of the chemically combined water has been removed. Its drying properties are similar to those of Tung oil. Heating the oil in the presence of catalysts such as clays and metal oxides, phosphoric acid, and sulfuric acid, is where dehydration is carried out. Dehydrated Castor Oil (DCO), Commercial Grade has a characteristic odor and is a yellow oily liquid. It has an acid value of 6 mg KOH/g max and a Poise viscosity (25°C) of 1.6 to 2.8. Dehydrated castor oil is a unique drying oil, which imparts fine gloss, toughness, good flexibility, adhesion, chemical and water resistance to the dry paint film with non-yellowing properties. DCO is a very suitable for Linseed oil. Using DCO with paints offer superior finish and are super white. Applications are as a primary binder for enamels, house paints, sealants, caulks, and inks. 收起 | |
| Dehydrated Castor Oil (DCO), Pale Grade | Castor International BV | Dehydrated Castor Oil (DCO), Pale Grade, is created when approximately 5% of the chemically combined water has been removed. Its drying properties are similar to those of Tung oil. Heating the oil in the presence of catalysts such as clays and metal oxide...展開 Dehydrated Castor Oil (DCO), Pale Grade, is created when approximately 5% of the chemically combined water has been removed. Its drying properties are similar to those of Tung oil. Heating the oil in the presence of catalysts such as clays and metal oxides, phosphoric acid, and sulfuric acid, is where dehydration is carried out. Dehydrated Castor Oil (DCO), Pale Grade has a characteristic odor and is a yellow oily liquid. It has a Poise viscosity (25°C) of 1.6 to 2.8. Dehydrated castor oil is a unique drying oil, which imparts fine gloss, toughness, good flexibility, adhesion, and chemical and water resistance to the dry paint film with non-yellowing properties. DCO is a very suitable for Linseed oil. Using DCO with paints offer superior finish and are super white. Applications are as a primary binder for enamels, house paints, sealants, caulks, and inks. 收起 | |
| Dehydrated Castor Oil (DCO), Special Grade | Castor International BV | Dehydrated Castor Oil (DCO), Special Grade, is created when approximately 5% of the chemically combined water has been removed. Its drying properties are similar to those of Tung oil. Heating the oil in the presence of catalysts such as clays and metal ox...展開 Dehydrated Castor Oil (DCO), Special Grade, is created when approximately 5% of the chemically combined water has been removed. Its drying properties are similar to those of Tung oil. Heating the oil in the presence of catalysts such as clays and metal oxides, phosphoric acid, and sulfuric acid, is where dehydration is carried out. Dehydrated Castor Oil (DCO), Special Grade has a characteristic odor and is a yellow oily liquid. It has an acid value of 4 mg KOH/g max and a Poise viscosity (25°C) of 1.6 to 2.8. Dehydrated castor oil is a unique drying oil, which imparts fine gloss, toughness, good flexibility, adhesion, and chemical and water resistance to the dry paint film with non-yellowing properties. DCO is a very suitable for Linseed oil. Using DCO with paints offer superior finish and are super white. Applications are as a primary binder for enamels, house paints, sealants, caulks, and inks. 收起 | |
| Dehydrated Castor Oil Fatty Acid (DCOFA), High | Castor International BV | Dehydrated Castor Oil Fatty Acid (DCOFA), Medium is a high diene fatty acid. DCOFA is a liquid that has a white to pale yellow color. Its linoleic acid (non-conjugated) is 25% to 30%, linoleic acid (conjugated) is 60% to 66%, and the conjugation by UV spe...展開 Dehydrated Castor Oil Fatty Acid (DCOFA), Medium is a high diene fatty acid. DCOFA is a liquid that has a white to pale yellow color. Its linoleic acid (non-conjugated) is 25% to 30%, linoleic acid (conjugated) is 60% to 66%, and the conjugation by UV spectrometer of 50 min. Dehydrated castor oil fatty acid based alkyd resins and polyamides make up superior constituent in numerous print inks and paint formulations. DCOFA is also used in the manufacture of high solid alkyds, acrylic and epoxy ester resins, which are useful for appliance finishes, automotive topcoats, coil coatings, primers, interior and exterior can coatings, tube coatings, overprint varnishes, marine finishes and high-speed printing inks. 收起 | |
| Dehydrated Castor Oil Fatty Acid (DCOFA), Low | Castor International BV | Dehydrated Castor Oil Fatty Acid (DCOFA), Low is a high diene fatty acid. DCOFA is a liquid that has a white to pale yellow color. Its linoleic acid (non-conjugated) is 45% to 55%, linoleic acid (conjugated) is 35% to 45%, and the conjugation by UV spectr...展開 Dehydrated Castor Oil Fatty Acid (DCOFA), Low is a high diene fatty acid. DCOFA is a liquid that has a white to pale yellow color. Its linoleic acid (non-conjugated) is 45% to 55%, linoleic acid (conjugated) is 35% to 45%, and the conjugation by UV spectrometer of 50 min. Dehydrated castor oil fatty acid based alkyd resins and polyamides make up superior constituent in numerous print inks and paint formulations. DCOFA is also used in the manufacture of high solid alkyds, acrylic and epoxy ester resins, which are useful for appliance finishes, automotive topcoats, coil coatings, primers, interior and exterior can coatings, tube coatings, overprint varnishes, marine finishes and high-speed printing inks. 收起 | |
| Dehydrated Castor Oil Fatty Acid (DCOFA), Medium | Castor International BV | Dehydrated Castor Oil Fatty Acid (DCOFA), Medium is a high diene fatty acid. DCOFA is a liquid that has a white to pale yellow color. Its linoleic acid (non-conjugated) is 30% to 45%, linoleic acid (conjugated) is 45% to 60%, and the conjugation by UV spe...展開 Dehydrated Castor Oil Fatty Acid (DCOFA), Medium is a high diene fatty acid. DCOFA is a liquid that has a white to pale yellow color. Its linoleic acid (non-conjugated) is 30% to 45%, linoleic acid (conjugated) is 45% to 60%, and the conjugation by UV spectrometer of 50 min. Dehydrated castor oil fatty acid based alkyd resins and polyamides make up superior constituent in numerous print inks and paint formulations. DCOFA is also used in the manufacture of high solid alkyds, acrylic and epoxy ester resins, which are useful for appliance finishes, automotive topcoats, coil coatings, primers, interior and exterior can coatings, tube coatings, overprint varnishes, marine finishes and high-speed printing inks. 收起 | |
| ELFTEX® 320 | Cabot Corporation - Additives | ELFTEX® 320 is a low structure specialty carbon black pigment that is formulated to impart high gloss, blue undertone and moderate color strength for use in lithographic gloss inks. | |
| Hydrogenated Castor Oil (HCO) | Castor International BV | Hydrogenated Castor Oil (HCO) is a compound attained by the hydrogenation of refined castor oil. It is a hard, waxy, white to cream colored product with a high melting point of 83 to 87 C°, and is nearly tasteless and odorless. There are numerous applicat...展開 Hydrogenated Castor Oil (HCO) is a compound attained by the hydrogenation of refined castor oil. It is a hard, waxy, white to cream colored product with a high melting point of 83 to 87 C°, and is nearly tasteless and odorless. There are numerous applications in various industrial segments, such as a slip additive in paints, plastics (PE), and inks and as a dispersing agent in carbon papers, inks, and plastic color master batches and as a dispersing additive and flow control in sealants, hot-melt adhesives, powder coatings, and more. 收起 | |
| MOGUL® L | Cabot Corporation - Additives | MOGUL® L specialty carbon black is a low structure specialty black pigment that can impart high gloss and high jetness in printing inks, coatings and other applications. Ultimately, the dispersibility of MOGUL L specialty carbon black depends on the equip...展開 MOGUL® L specialty carbon black is a low structure specialty black pigment that can impart high gloss and high jetness in printing inks, coatings and other applications. Ultimately, the dispersibility of MOGUL L specialty carbon black depends on the equipment used and the formulation. With its oxidized surface, it disperses more easily than other Cabot carbon blacks used in higher jetness applications. 收起 | |
| REGAL® 250R | Cabot Corporation - Additives | REGAL® 250R is a blue tone, low vehicle carbon black that is formulated for good color strength, high load base, and high gloss. This product is well suited for use in printing ink applications. | |
| REGAL® 330 | Cabot Corporation - Additives | REGAL® 330 is a low structure specialty black pigment that is formulated to impart high gloss and good color strength. This product is well suited for use in lithographic gloss inks. | |
| REGAL® 330R | Cabot Corporation - Additives | REGAL® 330R is a low structure specialty black pigment that is formulated to impart high gloss and good color strength. This product is well suited for use in lithographic gloss inks. | |
| REGAL® 350R | Cabot Corporation - Additives | REGAL® 350R is a low structure specialty black pigment that is formulated to impart a blue tone, and maintain good gloss and moderate color strength. This product is well suited for use in lithographic gloss inks. | |
| REGAL® 400 | Cabot Corporation - Additives | REGAL® 400 is a low structure pigment black that is formulated to impart high gloss and good color strength in printing inks and other applications. | |
| REGAL® 400R | Cabot Corporation - Additives | REGAL® 400R is a regular color black pigment that has a high oxidized surface and imparts good dispersibility, high gloss and color strength. This product is well suited for use in printing inks, toners, plastics, coatings. | |
| REGAL® 660 | Cabot Corporation - Additives | REGAL® 660 is a low structure specialty black pigment that is formulated to impart high gloss and high jetness. This product is well suited for use in printing inks, coatings and general dispersions. | |
| REGAL® 660R | Cabot Corporation - Additives | REGAL® 660R is a low structure, high tinting strength regular color printing black. It is formulated for liquid and powder systems. This product is well suited for coloring leather articles, dispersions, coatings, and inks. | |
| Ricinoleic Acid (RA) | Castor International BV | Ricinoleic Acid (RA), prepared from castor oil, is an unsaturated fatty acid viscous liquid that has a clear, yellowish appearance and an acid value of 175 mg KOH/g min. There are numerous applications in various industrial segments, such as soaps: metal ...展開 Ricinoleic Acid (RA), prepared from castor oil, is an unsaturated fatty acid viscous liquid that has a clear, yellowish appearance and an acid value of 175 mg KOH/g min. There are numerous applications in various industrial segments, such as soaps: metal working fluids, cutting oils, emulsifiers, and industrial lubricants; Surface coating: used as a pigment/dye dispersants in plastics, inks, coatings, etc.; Textiles: providing surface wetting and lubricity, and polarity. 收起 | |
| Sulphonated Castor Oil (SCO) | Castor International BV | Sulphonated Castor Oil (SCO), an anionic surfactant, has a purity of 75% with a non-volatile content of 70 to 85% and free fatty acid of 30 % max. It has many applications where it functions as a dispersing agent, detergent, wetting agent, and leveling ag...展開 Sulphonated Castor Oil (SCO), an anionic surfactant, has a purity of 75% with a non-volatile content of 70 to 85% and free fatty acid of 30 % max. It has many applications where it functions as a dispersing agent, detergent, wetting agent, and leveling agent. Sulphonated Castor Oil (SCO) is used as a dispersion and pigment wetting application in the paint industry, and as leveling and dye dispersion in the inks industry, among others. 收起 |
