| 12-Hydroxy Stearic Acid (12-HSA) | Castor International BV | 12-Hydroxy Stearic Acid (12-HSA) is a saturated hydroxyl fatty acid that is a hard, waxy, cream colored product in the form of flakes or powder, and is nearly tasteless and odorless. 12-HSA reacts with acrylic esters to produce durable, hard thermosetting...展開 12-Hydroxy Stearic Acid (12-HSA) is a saturated hydroxyl fatty acid that is a hard, waxy, cream colored product in the form of flakes or powder, and is nearly tasteless and odorless. 12-HSA reacts with acrylic esters to produce durable, hard thermosetting polymers used as a coating in metal decorative finishes, industrial appliance, and high quality automotive, and is a useful component in hot-melt adhesives, inks, and polishes. 收起 | |
| Blown Castor Oil (BCO) | Castor International BV | Blown Castor Oil (BCO) (also known as: oxidized castor oil, polymerized castor oil, caster stand oil) is a golden yellow to honey colored viscous liquid. Blown Castor Oil (BCO) has an acid value of 3 to 25 mg KOH/g and a viscosity of 15 to 17 Poise. There...展開 Blown Castor Oil (BCO) (also known as: oxidized castor oil, polymerized castor oil, caster stand oil) is a golden yellow to honey colored viscous liquid. Blown Castor Oil (BCO) has an acid value of 3 to 25 mg KOH/g and a viscosity of 15 to 17 Poise. There are numerous applications in various industrial segments, such as adhesives (hot-melt and solution): plasticizer and coupling solvent for resins and modifiers; inks: resin and binder plasticizer, medium for dispersion of pigments and dyes; sealants and caulks: flexibility, penetration, adhesion. 收起 | |
| CLiQFLOW® LED | CLiQ SwissTech (Netherlands) B.V. | CLiQFLOW® LED is a cream/beige powdered rheological additive with organically modified bentonite clay as a base. The organoclay is recommended for low to medium polar non-aqueous systems that are used in coatings, inks and adhesives. It provides good sag ...展開 CLiQFLOW® LED is a cream/beige powdered rheological additive with organically modified bentonite clay as a base. The organoclay is recommended for low to medium polar non-aqueous systems that are used in coatings, inks and adhesives. It provides good sag resistance, storage stability and a controlled shear thinning flow behavior. The product is easier to disperse than regular organoclays, allows for more flexibility in the production stage and is designed for direct incorporation into the extender and pigment grinding phase. 收起 | |
| CLiQFLOW® LP | CLiQ SwissTech (Netherlands) B.V. | CLiQFLOW® LP appears in a cream/beige powder form as a modified bentonite clay-based rheological additive. The organoclay needs a high shear activation. It is recommended for low to medium polar non-aqueous systems in inks, coatings and adhesives. It can ...展開 CLiQFLOW® LP appears in a cream/beige powder form as a modified bentonite clay-based rheological additive. The organoclay needs a high shear activation. It is recommended for low to medium polar non-aqueous systems in inks, coatings and adhesives. It can be added into the high shear grinding phase of extenders and pigments depending on the nature of polar activator used and the production conditions. 收起 | |
| CLiQSMART® 1014 | CLiQ SwissTech (Netherlands) B.V. | CLiQSMART® 1014 is an opaque liquid mineral-based defoamer used in aqueous systems. It has silica and surface-active materials to speed up the defoaming efficiency. Free of polysiloxane, it is usually applied to aqueous matt-to-gloss coating systems, varn...展開 CLiQSMART® 1014 is an opaque liquid mineral-based defoamer used in aqueous systems. It has silica and surface-active materials to speed up the defoaming efficiency. Free of polysiloxane, it is usually applied to aqueous matt-to-gloss coating systems, varnishes, wood stains, adhesives and printing inks. 收起 | |
| CLiQSMART® 1031 | CLiQ SwissTech (Netherlands) B.V. | CLiQSMART® 1031 is a pale yellow liquid 100% polyglycol defoamer used in aqueous systems. It is free of silicone and mineral oil, shows high efficiency and is usually used in low to mid gloss-pigmented aqueous coatings, ink systems and adhesives. It can b...展開 CLiQSMART® 1031 is a pale yellow liquid 100% polyglycol defoamer used in aqueous systems. It is free of silicone and mineral oil, shows high efficiency and is usually used in low to mid gloss-pigmented aqueous coatings, ink systems and adhesives. It can be used in the grinding and let-down phase of a manufacturing process. 收起 | |
| CLiQSMART® 1032 | CLiQ SwissTech (Netherlands) B.V. | CLiQSMART® 1032 is a white polygycol emulsion defoamer for aqueous systems. Free of mineral oil and silicone, it displays high efficiency and system compatibility. This product is usually applied in low to high-gloss pigmented aqueous industrial or decora...展開 CLiQSMART® 1032 is a white polygycol emulsion defoamer for aqueous systems. Free of mineral oil and silicone, it displays high efficiency and system compatibility. This product is usually applied in low to high-gloss pigmented aqueous industrial or decorative coatings, inks, and adhesives. 收起 | |
| CLiQSMART® 1051 | CLiQ SwissTech (Netherlands) B.V. | CLiQSMART® 1051 is a white polysiloxane emulsion-based defoamer used in aqueous systems. It can be used in a variety of aqueous systems where it is usually applied in gloss pigmented and clear coatings, overprint varnishes and inks. It has good balance be...展開 CLiQSMART® 1051 is a white polysiloxane emulsion-based defoamer used in aqueous systems. It can be used in a variety of aqueous systems where it is usually applied in gloss pigmented and clear coatings, overprint varnishes and inks. It has good balance between compatibility and defoaming efficiency and does not negatively impact on transparency and gloss. 收起 | |
| CLiQSPERSE® CG | CLiQ SwissTech (Netherlands) B.V. | CLiQSPERSE® CG appears as a clear brownish liquid that serves as a wetting agent for non-aqueous coatings and inks. It improves low shear viscosity, acts as a flocculant and is recommended as an organoclay activator. The product reduces pigment floating a...展開 CLiQSPERSE® CG appears as a clear brownish liquid that serves as a wetting agent for non-aqueous coatings and inks. It improves low shear viscosity, acts as a flocculant and is recommended as an organoclay activator. The product reduces pigment floating and flooding in inks and paints and improves storage stability and anti-settling behavior of solvent systems. 收起 | |
| Dehydrated Castor Oil (DCO), Commercial Grade | Castor International BV | Dehydrated Castor Oil (DCO), Commercial Grade, is created when approximately 5% of the chemically combined water has been removed. Its drying properties are similar to those of Tung oil. Heating the oil in the presence of catalysts such as clays and metal...展開 Dehydrated Castor Oil (DCO), Commercial Grade, is created when approximately 5% of the chemically combined water has been removed. Its drying properties are similar to those of Tung oil. Heating the oil in the presence of catalysts such as clays and metal oxides, phosphoric acid, and sulfuric acid, is where dehydration is carried out. Dehydrated Castor Oil (DCO), Commercial Grade has a characteristic odor and is a yellow oily liquid. It has an acid value of 6 mg KOH/g max and a Poise viscosity (25°C) of 1.6 to 2.8. Dehydrated castor oil is a unique drying oil, which imparts fine gloss, toughness, good flexibility, adhesion, chemical and water resistance to the dry paint film with non-yellowing properties. DCO is a very suitable for Linseed oil. Using DCO with paints offer superior finish and are super white. Applications are as a primary binder for enamels, house paints, sealants, caulks, and inks. 收起 | |
| Dehydrated Castor Oil (DCO), Pale Grade | Castor International BV | Dehydrated Castor Oil (DCO), Pale Grade, is created when approximately 5% of the chemically combined water has been removed. Its drying properties are similar to those of Tung oil. Heating the oil in the presence of catalysts such as clays and metal oxide...展開 Dehydrated Castor Oil (DCO), Pale Grade, is created when approximately 5% of the chemically combined water has been removed. Its drying properties are similar to those of Tung oil. Heating the oil in the presence of catalysts such as clays and metal oxides, phosphoric acid, and sulfuric acid, is where dehydration is carried out. Dehydrated Castor Oil (DCO), Pale Grade has a characteristic odor and is a yellow oily liquid. It has a Poise viscosity (25°C) of 1.6 to 2.8. Dehydrated castor oil is a unique drying oil, which imparts fine gloss, toughness, good flexibility, adhesion, and chemical and water resistance to the dry paint film with non-yellowing properties. DCO is a very suitable for Linseed oil. Using DCO with paints offer superior finish and are super white. Applications are as a primary binder for enamels, house paints, sealants, caulks, and inks. 收起 | |
| Dehydrated Castor Oil (DCO), Special Grade | Castor International BV | Dehydrated Castor Oil (DCO), Special Grade, is created when approximately 5% of the chemically combined water has been removed. Its drying properties are similar to those of Tung oil. Heating the oil in the presence of catalysts such as clays and metal ox...展開 Dehydrated Castor Oil (DCO), Special Grade, is created when approximately 5% of the chemically combined water has been removed. Its drying properties are similar to those of Tung oil. Heating the oil in the presence of catalysts such as clays and metal oxides, phosphoric acid, and sulfuric acid, is where dehydration is carried out. Dehydrated Castor Oil (DCO), Special Grade has a characteristic odor and is a yellow oily liquid. It has an acid value of 4 mg KOH/g max and a Poise viscosity (25°C) of 1.6 to 2.8. Dehydrated castor oil is a unique drying oil, which imparts fine gloss, toughness, good flexibility, adhesion, and chemical and water resistance to the dry paint film with non-yellowing properties. DCO is a very suitable for Linseed oil. Using DCO with paints offer superior finish and are super white. Applications are as a primary binder for enamels, house paints, sealants, caulks, and inks. 收起 | |
| Dehydrated Castor Oil Fatty Acid (DCOFA), High | Castor International BV | Dehydrated Castor Oil Fatty Acid (DCOFA), Medium is a high diene fatty acid. DCOFA is a liquid that has a white to pale yellow color. Its linoleic acid (non-conjugated) is 25% to 30%, linoleic acid (conjugated) is 60% to 66%, and the conjugation by UV spe...展開 Dehydrated Castor Oil Fatty Acid (DCOFA), Medium is a high diene fatty acid. DCOFA is a liquid that has a white to pale yellow color. Its linoleic acid (non-conjugated) is 25% to 30%, linoleic acid (conjugated) is 60% to 66%, and the conjugation by UV spectrometer of 50 min. Dehydrated castor oil fatty acid based alkyd resins and polyamides make up superior constituent in numerous print inks and paint formulations. DCOFA is also used in the manufacture of high solid alkyds, acrylic and epoxy ester resins, which are useful for appliance finishes, automotive topcoats, coil coatings, primers, interior and exterior can coatings, tube coatings, overprint varnishes, marine finishes and high-speed printing inks. 收起 | |
| Dehydrated Castor Oil Fatty Acid (DCOFA), Low | Castor International BV | Dehydrated Castor Oil Fatty Acid (DCOFA), Low is a high diene fatty acid. DCOFA is a liquid that has a white to pale yellow color. Its linoleic acid (non-conjugated) is 45% to 55%, linoleic acid (conjugated) is 35% to 45%, and the conjugation by UV spectr...展開 Dehydrated Castor Oil Fatty Acid (DCOFA), Low is a high diene fatty acid. DCOFA is a liquid that has a white to pale yellow color. Its linoleic acid (non-conjugated) is 45% to 55%, linoleic acid (conjugated) is 35% to 45%, and the conjugation by UV spectrometer of 50 min. Dehydrated castor oil fatty acid based alkyd resins and polyamides make up superior constituent in numerous print inks and paint formulations. DCOFA is also used in the manufacture of high solid alkyds, acrylic and epoxy ester resins, which are useful for appliance finishes, automotive topcoats, coil coatings, primers, interior and exterior can coatings, tube coatings, overprint varnishes, marine finishes and high-speed printing inks. 收起 | |
| Dehydrated Castor Oil Fatty Acid (DCOFA), Medium | Castor International BV | Dehydrated Castor Oil Fatty Acid (DCOFA), Medium is a high diene fatty acid. DCOFA is a liquid that has a white to pale yellow color. Its linoleic acid (non-conjugated) is 30% to 45%, linoleic acid (conjugated) is 45% to 60%, and the conjugation by UV spe...展開 Dehydrated Castor Oil Fatty Acid (DCOFA), Medium is a high diene fatty acid. DCOFA is a liquid that has a white to pale yellow color. Its linoleic acid (non-conjugated) is 30% to 45%, linoleic acid (conjugated) is 45% to 60%, and the conjugation by UV spectrometer of 50 min. Dehydrated castor oil fatty acid based alkyd resins and polyamides make up superior constituent in numerous print inks and paint formulations. DCOFA is also used in the manufacture of high solid alkyds, acrylic and epoxy ester resins, which are useful for appliance finishes, automotive topcoats, coil coatings, primers, interior and exterior can coatings, tube coatings, overprint varnishes, marine finishes and high-speed printing inks. 收起 | |
| Eastman Advantis™ 510W | Eastman Chemical B.V. | Eastman Advantis™ 510W is Eastman's next generation waterborne product for adhesion to thermoplastic polyolefin based plastics (TPO, PP). Eastman Advantis™ 510W is chlorine-free and APEO-free. Eastman Advantis™ 510W will find primary application as a blen...展開 Eastman Advantis™ 510W is Eastman's next generation waterborne product for adhesion to thermoplastic polyolefin based plastics (TPO, PP). Eastman Advantis™ 510W is chlorine-free and APEO-free. Eastman Advantis™ 510W will find primary application as a blend-in resin in waterborne primers and waterborne basecoats for automotive bumper applications. Eastman Advantis™ 510W can also be used as a wash primer and is suitable as an adhesion promoter for applications beyond automotive. Eastman Advantis™ 510W provides excellent adhesion on non-flame treated EPDM rubber modified polypropylene substrates. 收起 | |
| EASTMAN CELLULOSE ACETATE BUTYRATE (CAB-381-0.1) | Eastman Chemical B.V. | A cellulose ester with medium butyryl content and low viscosity. It was designed for use where low-application viscosities at relatively high solids levels is needed. It is soluble in a wide range of solvents and compatible with many other resins. It will...展開 A cellulose ester with medium butyryl content and low viscosity. It was designed for use where low-application viscosities at relatively high solids levels is needed. It is soluble in a wide range of solvents and compatible with many other resins. It will also tolerate the use of solvent blends currently exempt from certain air pollution regulations. It is supplied as a dry, free-flowing powder. 收起 | |
| Eastman™ Cellulose Acetate Butyrate (CAB-531-1) | Eastman Chemical B.V. | Eastman™ Cellulose Acetate Butyrate (CAB-531-1) is a cellulose ester. This product has tough films with good resistance to marring. Weathering is possible with this product through combinations of cellulose acetate butyrate with thermoplastic acrylic resi...展開 Eastman™ Cellulose Acetate Butyrate (CAB-531-1) is a cellulose ester. This product has tough films with good resistance to marring. Weathering is possible with this product through combinations of cellulose acetate butyrate with thermoplastic acrylic resins. Eastman™ CAB-531-1 esters are soluble in a wide range of solvents. It is a flexible resin requiring lower plasticizer modification. Eastman™ CAB-531-1 is used for food contact applications, nail care, and coatings for automotive plastics. 收起 | |
| EASTMAN CELLULOSE ACETATE BUTYRATE (CAB-553-0.4) | Eastman Chemical B.V. | Soluble in low molecular weight alcohols (methanol, ethanol, isopropanol, and n-propanol) as well as other common organic solvents. It has a high hydroxyl content (4.8 wt. %, average), which contributes to its alcohol solubility. The hydroxyl group is rea...展開 Soluble in low molecular weight alcohols (methanol, ethanol, isopropanol, and n-propanol) as well as other common organic solvents. It has a high hydroxyl content (4.8 wt. %, average), which contributes to its alcohol solubility. The hydroxyl group is reactive and may be crosslinked with ureaformaldehydes, melamines, and polyisocyantes. Films of CAB-553-0.4 are colorless and have good ultraviolet stability, maintaining their low color over long periods of time. 收起 | |
| EASTMAN CELLULOSE ACETATE (CA-398-3) | Eastman Chemical B.V. | One of the lower viscosity solution grades of cellulose acetate. The average ASTM viscosity of CA-398-3 is 3 seconds. Eastman Cellulose Acetate (CA-398-3) is supplied in the form of a fine, dry, free-flowing powder. It may be blended with appropriate solv...展開 One of the lower viscosity solution grades of cellulose acetate. The average ASTM viscosity of CA-398-3 is 3 seconds. Eastman Cellulose Acetate (CA-398-3) is supplied in the form of a fine, dry, free-flowing powder. It may be blended with appropriate solvents, plasticizers, and other modifying resins to formulate coatings for paper, glass, plastic, wire screen, and electrical wiring. 收起 | |
| EASTMAN CELLULOSE ACETATE PROPIONATE (CAP-482-0.5) | Eastman Chemical B.V. | A low-odor, free-flowing powder. It is especially adaptable for use in printing inks and clear overprint varnishes because of its wide solubility in ink solvents, compatibility with other resins used in printing inks, and high melting point. Films formed ...展開 A low-odor, free-flowing powder. It is especially adaptable for use in printing inks and clear overprint varnishes because of its wide solubility in ink solvents, compatibility with other resins used in printing inks, and high melting point. Films formed from Eastman CAP-482-0.5 have fast solvent release, excellent antiblocking properties, and grease resistance superior to that of other film-formers. 收起 | |
| EASTMAN CELLULOSE ACETATE PROPIONATE (CAP-504-0.2) | Eastman Chemical B.V. | A free-flowing powder having low odor, low color, and high hydroxyl content. It is fast dissolving, has good water tolerance and resistance to souring, and is compatible with many ink resins and solvents. It has good resistance to discoloration from UV li...展開 A free-flowing powder having low odor, low color, and high hydroxyl content. It is fast dissolving, has good water tolerance and resistance to souring, and is compatible with many ink resins and solvents. It has good resistance to discoloration from UV light and has good adhesion to plastics. It has a low viscosity (0.2 seconds) and has an approximate propionyl content of 42.5 wt%. 收起 | |
| Eastman Solus™ 2100 | Eastman Chemical B.V. | Eastman Solus™ 2100 is a dry, free-flowing powder convenient to handle. It is soluble in a wide range of solvents and compatible in most high solids coatings systems. Eastman Solus™ 2100 is used in automotive refinishing. This product offers ease of sandi...展開 Eastman Solus™ 2100 is a dry, free-flowing powder convenient to handle. It is soluble in a wide range of solvents and compatible in most high solids coatings systems. Eastman Solus™ 2100 is used in automotive refinishing. This product offers ease of sanding, excellent anti-sag behavior, faster dry to touch time, improved gloss, and wider window of polishability. 收起 | |
| Eastman Texanol™ Ester Alcohol | Eastman Chemical B.V. | Eastman Texanol™ Ester Alcohol is the premier coalescent for latex paints. It performs well in all types of latex paints, in a variety of weather conditions, and over substrates with different levels of porosity. It provides the highest level of film inte...展開 Eastman Texanol™ Ester Alcohol is the premier coalescent for latex paints. It performs well in all types of latex paints, in a variety of weather conditions, and over substrates with different levels of porosity. It provides the highest level of film integrity at low levels of coalescent, enhancing the performance properties of the paint including low temperature coalescence, touch-up, scrub resistance, washability, color development, thermal flexibility, and resistance to mudcracking. Eastman Texanol™ ester alcohol also enhances thickening efficiency when used with associative thickeners. 收起 | |
| Hydrogenated Castor Oil (HCO) | Castor International BV | Hydrogenated Castor Oil (HCO) is a compound attained by the hydrogenation of refined castor oil. It is a hard, waxy, white to cream colored product with a high melting point of 83 to 87 C°, and is nearly tasteless and odorless. There are numerous applicat...展開 Hydrogenated Castor Oil (HCO) is a compound attained by the hydrogenation of refined castor oil. It is a hard, waxy, white to cream colored product with a high melting point of 83 to 87 C°, and is nearly tasteless and odorless. There are numerous applications in various industrial segments, such as a slip additive in paints, plastics (PE), and inks and as a dispersing agent in carbon papers, inks, and plastic color master batches and as a dispersing additive and flow control in sealants, hot-melt adhesives, powder coatings, and more. 收起 | |
| Ricinoleic Acid (RA) | Castor International BV | Ricinoleic Acid (RA), prepared from castor oil, is an unsaturated fatty acid viscous liquid that has a clear, yellowish appearance and an acid value of 175 mg KOH/g min. There are numerous applications in various industrial segments, such as soaps: metal ...展開 Ricinoleic Acid (RA), prepared from castor oil, is an unsaturated fatty acid viscous liquid that has a clear, yellowish appearance and an acid value of 175 mg KOH/g min. There are numerous applications in various industrial segments, such as soaps: metal working fluids, cutting oils, emulsifiers, and industrial lubricants; Surface coating: used as a pigment/dye dispersants in plastics, inks, coatings, etc.; Textiles: providing surface wetting and lubricity, and polarity. 收起 | |
| Sulphonated Castor Oil (SCO) | Castor International BV | Sulphonated Castor Oil (SCO), an anionic surfactant, has a purity of 75% with a non-volatile content of 70 to 85% and free fatty acid of 30 % max. It has many applications where it functions as a dispersing agent, detergent, wetting agent, and leveling ag...展開 Sulphonated Castor Oil (SCO), an anionic surfactant, has a purity of 75% with a non-volatile content of 70 to 85% and free fatty acid of 30 % max. It has many applications where it functions as a dispersing agent, detergent, wetting agent, and leveling agent. Sulphonated Castor Oil (SCO) is used as a dispersion and pigment wetting application in the paint industry, and as leveling and dye dispersion in the inks industry, among others. 收起 |
