| 12-Hydroxy Stearic Acid (12-HSA) | Castor International BV | 12-Hydroxy Stearic Acid (12-HSA) is a saturated hydroxyl fatty acid that is a hard, waxy, cream colored product in the form of flakes or powder, and is nearly tasteless and odorless. 12-HSA reacts with acrylic esters to produce durable, hard thermosetting...展開 12-Hydroxy Stearic Acid (12-HSA) is a saturated hydroxyl fatty acid that is a hard, waxy, cream colored product in the form of flakes or powder, and is nearly tasteless and odorless. 12-HSA reacts with acrylic esters to produce durable, hard thermosetting polymers used as a coating in metal decorative finishes, industrial appliance, and high quality automotive, and is a useful component in hot-melt adhesives, inks, and polishes. 收起 | |
| Blown Castor Oil (BCO) | Castor International BV | Blown Castor Oil (BCO) (also known as: oxidized castor oil, polymerized castor oil, caster stand oil) is a golden yellow to honey colored viscous liquid. Blown Castor Oil (BCO) has an acid value of 3 to 25 mg KOH/g and a viscosity of 15 to 17 Poise. There...展開 Blown Castor Oil (BCO) (also known as: oxidized castor oil, polymerized castor oil, caster stand oil) is a golden yellow to honey colored viscous liquid. Blown Castor Oil (BCO) has an acid value of 3 to 25 mg KOH/g and a viscosity of 15 to 17 Poise. There are numerous applications in various industrial segments, such as adhesives (hot-melt and solution): plasticizer and coupling solvent for resins and modifiers; inks: resin and binder plasticizer, medium for dispersion of pigments and dyes; sealants and caulks: flexibility, penetration, adhesion. 收起 | |
| Dehydrated Castor Oil (DCO), Commercial Grade | Castor International BV | Dehydrated Castor Oil (DCO), Commercial Grade, is created when approximately 5% of the chemically combined water has been removed. Its drying properties are similar to those of Tung oil. Heating the oil in the presence of catalysts such as clays and metal...展開 Dehydrated Castor Oil (DCO), Commercial Grade, is created when approximately 5% of the chemically combined water has been removed. Its drying properties are similar to those of Tung oil. Heating the oil in the presence of catalysts such as clays and metal oxides, phosphoric acid, and sulfuric acid, is where dehydration is carried out. Dehydrated Castor Oil (DCO), Commercial Grade has a characteristic odor and is a yellow oily liquid. It has an acid value of 6 mg KOH/g max and a Poise viscosity (25°C) of 1.6 to 2.8. Dehydrated castor oil is a unique drying oil, which imparts fine gloss, toughness, good flexibility, adhesion, chemical and water resistance to the dry paint film with non-yellowing properties. DCO is a very suitable for Linseed oil. Using DCO with paints offer superior finish and are super white. Applications are as a primary binder for enamels, house paints, sealants, caulks, and inks. 收起 | |
| Dehydrated Castor Oil (DCO), Pale Grade | Castor International BV | Dehydrated Castor Oil (DCO), Pale Grade, is created when approximately 5% of the chemically combined water has been removed. Its drying properties are similar to those of Tung oil. Heating the oil in the presence of catalysts such as clays and metal oxide...展開 Dehydrated Castor Oil (DCO), Pale Grade, is created when approximately 5% of the chemically combined water has been removed. Its drying properties are similar to those of Tung oil. Heating the oil in the presence of catalysts such as clays and metal oxides, phosphoric acid, and sulfuric acid, is where dehydration is carried out. Dehydrated Castor Oil (DCO), Pale Grade has a characteristic odor and is a yellow oily liquid. It has a Poise viscosity (25°C) of 1.6 to 2.8. Dehydrated castor oil is a unique drying oil, which imparts fine gloss, toughness, good flexibility, adhesion, and chemical and water resistance to the dry paint film with non-yellowing properties. DCO is a very suitable for Linseed oil. Using DCO with paints offer superior finish and are super white. Applications are as a primary binder for enamels, house paints, sealants, caulks, and inks. 收起 | |
| Dehydrated Castor Oil (DCO), Special Grade | Castor International BV | Dehydrated Castor Oil (DCO), Special Grade, is created when approximately 5% of the chemically combined water has been removed. Its drying properties are similar to those of Tung oil. Heating the oil in the presence of catalysts such as clays and metal ox...展開 Dehydrated Castor Oil (DCO), Special Grade, is created when approximately 5% of the chemically combined water has been removed. Its drying properties are similar to those of Tung oil. Heating the oil in the presence of catalysts such as clays and metal oxides, phosphoric acid, and sulfuric acid, is where dehydration is carried out. Dehydrated Castor Oil (DCO), Special Grade has a characteristic odor and is a yellow oily liquid. It has an acid value of 4 mg KOH/g max and a Poise viscosity (25°C) of 1.6 to 2.8. Dehydrated castor oil is a unique drying oil, which imparts fine gloss, toughness, good flexibility, adhesion, and chemical and water resistance to the dry paint film with non-yellowing properties. DCO is a very suitable for Linseed oil. Using DCO with paints offer superior finish and are super white. Applications are as a primary binder for enamels, house paints, sealants, caulks, and inks. 收起 | |
| Dehydrated Castor Oil Fatty Acid (DCOFA), High | Castor International BV | Dehydrated Castor Oil Fatty Acid (DCOFA), Medium is a high diene fatty acid. DCOFA is a liquid that has a white to pale yellow color. Its linoleic acid (non-conjugated) is 25% to 30%, linoleic acid (conjugated) is 60% to 66%, and the conjugation by UV spe...展開 Dehydrated Castor Oil Fatty Acid (DCOFA), Medium is a high diene fatty acid. DCOFA is a liquid that has a white to pale yellow color. Its linoleic acid (non-conjugated) is 25% to 30%, linoleic acid (conjugated) is 60% to 66%, and the conjugation by UV spectrometer of 50 min. Dehydrated castor oil fatty acid based alkyd resins and polyamides make up superior constituent in numerous print inks and paint formulations. DCOFA is also used in the manufacture of high solid alkyds, acrylic and epoxy ester resins, which are useful for appliance finishes, automotive topcoats, coil coatings, primers, interior and exterior can coatings, tube coatings, overprint varnishes, marine finishes and high-speed printing inks. 收起 | |
| Dehydrated Castor Oil Fatty Acid (DCOFA), Low | Castor International BV | Dehydrated Castor Oil Fatty Acid (DCOFA), Low is a high diene fatty acid. DCOFA is a liquid that has a white to pale yellow color. Its linoleic acid (non-conjugated) is 45% to 55%, linoleic acid (conjugated) is 35% to 45%, and the conjugation by UV spectr...展開 Dehydrated Castor Oil Fatty Acid (DCOFA), Low is a high diene fatty acid. DCOFA is a liquid that has a white to pale yellow color. Its linoleic acid (non-conjugated) is 45% to 55%, linoleic acid (conjugated) is 35% to 45%, and the conjugation by UV spectrometer of 50 min. Dehydrated castor oil fatty acid based alkyd resins and polyamides make up superior constituent in numerous print inks and paint formulations. DCOFA is also used in the manufacture of high solid alkyds, acrylic and epoxy ester resins, which are useful for appliance finishes, automotive topcoats, coil coatings, primers, interior and exterior can coatings, tube coatings, overprint varnishes, marine finishes and high-speed printing inks. 收起 | |
| Dehydrated Castor Oil Fatty Acid (DCOFA), Medium | Castor International BV | Dehydrated Castor Oil Fatty Acid (DCOFA), Medium is a high diene fatty acid. DCOFA is a liquid that has a white to pale yellow color. Its linoleic acid (non-conjugated) is 30% to 45%, linoleic acid (conjugated) is 45% to 60%, and the conjugation by UV spe...展開 Dehydrated Castor Oil Fatty Acid (DCOFA), Medium is a high diene fatty acid. DCOFA is a liquid that has a white to pale yellow color. Its linoleic acid (non-conjugated) is 30% to 45%, linoleic acid (conjugated) is 45% to 60%, and the conjugation by UV spectrometer of 50 min. Dehydrated castor oil fatty acid based alkyd resins and polyamides make up superior constituent in numerous print inks and paint formulations. DCOFA is also used in the manufacture of high solid alkyds, acrylic and epoxy ester resins, which are useful for appliance finishes, automotive topcoats, coil coatings, primers, interior and exterior can coatings, tube coatings, overprint varnishes, marine finishes and high-speed printing inks. 收起 | |
| Hydrogenated Castor Oil (HCO) | Castor International BV | Hydrogenated Castor Oil (HCO) is a compound attained by the hydrogenation of refined castor oil. It is a hard, waxy, white to cream colored product with a high melting point of 83 to 87 C°, and is nearly tasteless and odorless. There are numerous applicat...展開 Hydrogenated Castor Oil (HCO) is a compound attained by the hydrogenation of refined castor oil. It is a hard, waxy, white to cream colored product with a high melting point of 83 to 87 C°, and is nearly tasteless and odorless. There are numerous applications in various industrial segments, such as a slip additive in paints, plastics (PE), and inks and as a dispersing agent in carbon papers, inks, and plastic color master batches and as a dispersing additive and flow control in sealants, hot-melt adhesives, powder coatings, and more. 收起 | |
| mju:wax® 2000 | Ceronas GmbH & Co., KG | mju:wax® 2000 is a micronised, synthetic PE/FT wax compound in the form of a white powder. This product can improve scratch resistance, slip, and anti blocking properties, and is used as an additive in coatings, overprint varnishes, and printing inks to m...展開 mju:wax® 2000 is a micronised, synthetic PE/FT wax compound in the form of a white powder. This product can improve scratch resistance, slip, and anti blocking properties, and is used as an additive in coatings, overprint varnishes, and printing inks to modify the surface properties. 收起 | |
| mju:wax® 2000 H | Ceronas GmbH & Co., KG | mju:wax® 2000 H is a micronised, synthetic wax compound in the form of a white powder. This product can improve scratch resistance, slip, and anti blocking properties, and is used as an additive in coatings, overprint varnishes, and printing inks to modif...展開 mju:wax® 2000 H is a micronised, synthetic wax compound in the form of a white powder. This product can improve scratch resistance, slip, and anti blocking properties, and is used as an additive in coatings, overprint varnishes, and printing inks to modify the surface properties. 收起 | |
| mju:wax® 2002 | Ceronas GmbH & Co., KG | mju:wax® 2002 is a micronised, synthetic wax in the form of a white powder. This product can improve scratch resistance, slip and anti blocking properties, and is used as an additive in coatings, overprint varnishes, and printing inks to modify the surfac...展開 mju:wax® 2002 is a micronised, synthetic wax in the form of a white powder. This product can improve scratch resistance, slip and anti blocking properties, and is used as an additive in coatings, overprint varnishes, and printing inks to modify the surface properties. 收起 | |
| mju:wax® 2002 EF | Ceronas GmbH & Co., KG | mju:wax® 2002 EF is a micronised synthetic wax in the form of a white powder. This product can improve scratch resistance, slip, and anti blocking properties, and is used as an additive in coatings, overprint varnishes, and printing inks to modify the sur...展開 mju:wax® 2002 EF is a micronised synthetic wax in the form of a white powder. This product can improve scratch resistance, slip, and anti blocking properties, and is used as an additive in coatings, overprint varnishes, and printing inks to modify the surface properties. 收起 | |
| mju:wax® 2002 F | Ceronas GmbH & Co., KG | mju:wax® 2002 F is a micronised, synthetic wax in the form of a white powder. This product can improve scratch resistance and slip properties, and is used as an additive in coatings, overprint varnishes, and printing inks to modify the surface properties. | |
| mju:wax® 2003 | Ceronas GmbH & Co., KG | mju:wax® 2003 is a micronised, synthetic wax compound in the form of a white powder. This product can improve rub and scratch resistance, and is used as an additive in coatings, overprint varnishes, and printing inks to modify the surface properties. | |
| mju:wax® 2004 | Ceronas GmbH & Co., KG | mju:wax® 2004 is a micronised, synthetic wax compound in the form of a white to off-white powder. This product can improve scratch resistance, slip, and anti blocking properties, and is used as an additive in coatings, overprint varnishes, and printing in...展開 mju:wax® 2004 is a micronised, synthetic wax compound in the form of a white to off-white powder. This product can improve scratch resistance, slip, and anti blocking properties, and is used as an additive in coatings, overprint varnishes, and printing inks to modify the surface properties. 收起 | |
| mju:wax® 2005 | Ceronas GmbH & Co., KG | mju:wax® 2005 is a micronised, synthetic wax compound in the form of a white powder. This product can improve scratch resistance, slip, and anti blocking properties, and can be easily incorporated in water-based systems. It is used as an additive in coati...展開 mju:wax® 2005 is a micronised, synthetic wax compound in the form of a white powder. This product can improve scratch resistance, slip, and anti blocking properties, and can be easily incorporated in water-based systems. It is used as an additive in coatings, overprint varnishes, and printing inks to modify the surface properties. 收起 | |
| mju:wax® 2400 | Ceronas GmbH & Co., KG | mju:wax® 2400 is a micronised wax compound in the form of a white powder. This product can improve scratch resistance and anti blocking properties, and is used as an additive in lacquers, coatings, and printing inks to modify the surface properties. It al...展開 mju:wax® 2400 is a micronised wax compound in the form of a white powder. This product can improve scratch resistance and anti blocking properties, and is used as an additive in lacquers, coatings, and printing inks to modify the surface properties. It also acts as a matting agent and sanding aid 收起 | |
| mju:wax® 2401 | Ceronas GmbH & Co., KG | mju:wax® 2401 is a micronised wax compound containing PE and amide wax that is in the form of a white powder. This product can improve scratch resistance and anti blocking properties, and is used as an additive in lacquers, coatings, and printing inks to ...展開 mju:wax® 2401 is a micronised wax compound containing PE and amide wax that is in the form of a white powder. This product can improve scratch resistance and anti blocking properties, and is used as an additive in lacquers, coatings, and printing inks to modify the surface properties. It also acts as a matting agent and sanding aid. 收起 | |
| mju:wax® 2450 | Ceronas GmbH & Co., KG | mju:wax® 2450 is a micronised wax compound in the form of a white powder. This product can improve slip and rub resistance, and is used as an additive in water or solvent based lacquers, coatings, and printing inks to modify the surface properties. | |
| mju:wax® 2530 | Ceronas GmbH & Co., KG | mju:wax® 2530 is a micronised wax compound with PTFE in the form of a white powder. This product can provide excellent slip and scratch resistance, and is used in solvent based as well as water based lacquers, coatings, and printing inks to modify the sur...展開 mju:wax® 2530 is a micronised wax compound with PTFE in the form of a white powder. This product can provide excellent slip and scratch resistance, and is used in solvent based as well as water based lacquers, coatings, and printing inks to modify the surface properties. It is often used in powder coatings. 收起 | |
| mju:wax® 2594 | Ceronas GmbH & Co., KG | mju:wax® 2594 is a micronised wax additive in the form of a white powder. This product has excellent matting properties combined with good transparency and silky touch. It can provide good scratch and abrasion resistance, and is often used in solvent or w...展開 mju:wax® 2594 is a micronised wax additive in the form of a white powder. This product has excellent matting properties combined with good transparency and silky touch. It can provide good scratch and abrasion resistance, and is often used in solvent or water based systems and in wood coatings, printing inks, and lacquers. 收起 | |
| mju:wax® 2739 | Ceronas GmbH & Co., KG | mju:wax® 2739 is a micronised PE/carnauba/PTFE wax compound in the form of an off-white powder. This product can improve scratch resistance, slip, and anti blocking properties, and can provide excellent metal marking resistance as well as strong reductio...展開 mju:wax® 2739 is a micronised PE/carnauba/PTFE wax compound in the form of an off-white powder. This product can improve scratch resistance, slip, and anti blocking properties, and can provide excellent metal marking resistance as well as strong reduction of the coefficient of friction. It is often used in lacquers, can coatings, and graphic arts. 收起 | |
| mju:wax® 3000 | Ceronas GmbH & Co., KG | mju:wax® 3000 is a micronised PTFE in the form of a white powder. This product can improve surface qualities of printing inks, paints, and coatings. | |
| mju:wax® 3001 | Ceronas GmbH & Co., KG | mju:wax® 3001 is a micronised PTFE in the form of a white powder. This product can improve surface qualities of printing inks, paints, and coatings. | |
| mju:wax® 4000 | Ceronas GmbH & Co., KG | mju:wax® 4000 is a micronised amide wax in the form of a white powder. This product can improve scratch resistance and anti blocking properties, and is used as an additive in printing inks, lacquers, powder coatings, and wood coatings to modify the surfac...展開 mju:wax® 4000 is a micronised amide wax in the form of a white powder. This product can improve scratch resistance and anti blocking properties, and is used as an additive in printing inks, lacquers, powder coatings, and wood coatings to modify the surface properties. 收起 | |
| mju:wax® 4001 | Ceronas GmbH & Co., KG | mju:wax® 4001 is a micronised amide wax with high melting temperature, and is in the form of a white powder. This product can improve scratch resistance, slip, and anti blocking properties, and is used as an additive in printing inks, lacquers, powder coa...展開 mju:wax® 4001 is a micronised amide wax with high melting temperature, and is in the form of a white powder. This product can improve scratch resistance, slip, and anti blocking properties, and is used as an additive in printing inks, lacquers, powder coatings, and wood coatings to modify the surface properties. 收起 | |
| mju:wax® 4253 | Ceronas GmbH & Co., KG | mju:wax® 4253 is a micronised wax compound with PTFE in the form of a white powder. This product can improve scratch resistance and slip properties, and is used as an additive in water or solvent based lacquers, printing inks, and powder coatings to modif...展開 mju:wax® 4253 is a micronised wax compound with PTFE in the form of a white powder. This product can improve scratch resistance and slip properties, and is used as an additive in water or solvent based lacquers, printing inks, and powder coatings to modify the surface properties. 收起 | |
| mju:wax® 4700 | Ceronas GmbH & Co., KG | mju:wax® 4700 is a micronised "green" wax compound in the form of a white powder. This product can improve scratch resistance and anti blocking properties, and is used as an additive in lacquers, printing inks, and wood coatings. | |
| mju:wax® 4810 | Ceronas GmbH & Co., KG | mju:wax® 4810 is a micronised polypropylene wax compound in the form of a white powder. This product can improve scratch resistance and anti blocking properties, and is used as an additive in lacquers, printing inks, powder coatings, and wood coatings to ...展開 mju:wax® 4810 is a micronised polypropylene wax compound in the form of a white powder. This product can improve scratch resistance and anti blocking properties, and is used as an additive in lacquers, printing inks, powder coatings, and wood coatings to modify the surface properties. 收起 | |
| mju:wax® 5420 | Ceronas GmbH & Co., KG | mju:wax® 5420 is a micronised PE/amide wax compound in the form of an off-white powder. This product can improve scratch resistance, anti blocking and matting properties in lacquers, graphic arts, and wood coatings | |
| mju:wax® 7200 | Ceronas GmbH & Co., KG | mju:wax® 7200 is a micronised carnauba wax compound in the form of an off-white powder. This product can improve scratch resistance and slip properties, and is used as an additive in graphic arts, can coatings, water and solvent based systems. | |
| mju:wax® 8000 | Ceronas GmbH & Co., KG | mju:wax® 8000 is a micronised polypropylene wax compound in the form of a white powder. This product can be used as an additive in solvent based lacquers, printing inks, and wood coatings to modify surface properties. | |
| mju:wax® 8001 | Ceronas GmbH & Co., KG | mju:wax® 8001 is a micronised polypropylene wax compound in the form of a white powder. This product can be used as an additive in solvent based lacquers, printing inks, and wood coatings to modify surface properties. It can also be used as a degassing ag...展開 mju:wax® 8001 is a micronised polypropylene wax compound in the form of a white powder. This product can be used as an additive in solvent based lacquers, printing inks, and wood coatings to modify surface properties. It can also be used as a degassing agent in powder coatings. 收起 | |
| mju:wax® 8400 | Ceronas GmbH & Co., KG | mju:wax® 8400 is a micronised polypropylene wax compound in the form of a white powder. This product can improve scratch resistance and anti blocking properties, and is used as an additive in lacquers, printing inks, powder coatings, and wood coatings to ...展開 mju:wax® 8400 is a micronised polypropylene wax compound in the form of a white powder. This product can improve scratch resistance and anti blocking properties, and is used as an additive in lacquers, printing inks, powder coatings, and wood coatings to modify the surface properties. 收起 | |
| mju:wax® 9524 | Ceronas GmbH & Co., KG | mju:wax® 9524 is a micronised wax additive in the form of an off-white powder. This product can provide very good scratch and abrasion resistance, and is used as an additive in printing inks, wood coatings, and lacquers. | |
| Ricinoleic Acid (RA) | Castor International BV | Ricinoleic Acid (RA), prepared from castor oil, is an unsaturated fatty acid viscous liquid that has a clear, yellowish appearance and an acid value of 175 mg KOH/g min. There are numerous applications in various industrial segments, such as soaps: metal ...展開 Ricinoleic Acid (RA), prepared from castor oil, is an unsaturated fatty acid viscous liquid that has a clear, yellowish appearance and an acid value of 175 mg KOH/g min. There are numerous applications in various industrial segments, such as soaps: metal working fluids, cutting oils, emulsifiers, and industrial lubricants; Surface coating: used as a pigment/dye dispersants in plastics, inks, coatings, etc.; Textiles: providing surface wetting and lubricity, and polarity. 收起 | |
| Spolostan 3G | Enaspol AS | Spolostan 3G is a sodium salt dispersing agent that is a yellow-brown dust free powder in appearance with a low-molecular condensate that prevents the creation of dye agglomerates and enhances dye penetration, uniform dyeing and color fastness. This produ...展開 Spolostan 3G is a sodium salt dispersing agent that is a yellow-brown dust free powder in appearance with a low-molecular condensate that prevents the creation of dye agglomerates and enhances dye penetration, uniform dyeing and color fastness. This product is commonly applied in dyes, pigments, paints, and coatings. It is also an efficient dispersing agent in the grinding of pigments and printing inks. 收起 | |
| Spolostan 3L | Enaspol AS | Spolostan 3L is a sodium salt dispersing agent that is a dark brown liquid in appearance with a low-molecular condensate that prevents the creation of dye agglomerates and enhances dye penetration, uniform dyeing and color fastness. This product is common...展開 Spolostan 3L is a sodium salt dispersing agent that is a dark brown liquid in appearance with a low-molecular condensate that prevents the creation of dye agglomerates and enhances dye penetration, uniform dyeing and color fastness. This product is commonly applied in dyes, pigments, paints, and coatings. It is also an efficient dispersing agent in the grinding of pigments and printing inks. 收起 | |
| Sulphonated Castor Oil (SCO) | Castor International BV | Sulphonated Castor Oil (SCO), an anionic surfactant, has a purity of 75% with a non-volatile content of 70 to 85% and free fatty acid of 30 % max. It has many applications where it functions as a dispersing agent, detergent, wetting agent, and leveling ag...展開 Sulphonated Castor Oil (SCO), an anionic surfactant, has a purity of 75% with a non-volatile content of 70 to 85% and free fatty acid of 30 % max. It has many applications where it functions as a dispersing agent, detergent, wetting agent, and leveling agent. Sulphonated Castor Oil (SCO) is used as a dispersion and pigment wetting application in the paint industry, and as leveling and dye dispersion in the inks industry, among others. 收起 |
