| 12-Hydroxy Stearic Acid (12-HSA) | Castor International BV | 12-Hydroxy Stearic Acid (12-HSA) is a saturated hydroxyl fatty acid that is a hard, waxy, cream colored product in the form of flakes or powder, and is nearly tasteless and odorless. 12-HSA reacts with acrylic esters to produce durable, hard thermosetting...展開 12-Hydroxy Stearic Acid (12-HSA) is a saturated hydroxyl fatty acid that is a hard, waxy, cream colored product in the form of flakes or powder, and is nearly tasteless and odorless. 12-HSA reacts with acrylic esters to produce durable, hard thermosetting polymers used as a coating in metal decorative finishes, industrial appliance, and high quality automotive, and is a useful component in hot-melt adhesives, inks, and polishes. 收起 | |
| Blown Castor Oil (BCO) | Castor International BV | Blown Castor Oil (BCO) (also known as: oxidized castor oil, polymerized castor oil, caster stand oil) is a golden yellow to honey colored viscous liquid. Blown Castor Oil (BCO) has an acid value of 3 to 25 mg KOH/g and a viscosity of 15 to 17 Poise. There...展開 Blown Castor Oil (BCO) (also known as: oxidized castor oil, polymerized castor oil, caster stand oil) is a golden yellow to honey colored viscous liquid. Blown Castor Oil (BCO) has an acid value of 3 to 25 mg KOH/g and a viscosity of 15 to 17 Poise. There are numerous applications in various industrial segments, such as adhesives (hot-melt and solution): plasticizer and coupling solvent for resins and modifiers; inks: resin and binder plasticizer, medium for dispersion of pigments and dyes; sealants and caulks: flexibility, penetration, adhesion. 收起 | |
| Dehydrated Castor Oil (DCO), Commercial Grade | Castor International BV | Dehydrated Castor Oil (DCO), Commercial Grade, is created when approximately 5% of the chemically combined water has been removed. Its drying properties are similar to those of Tung oil. Heating the oil in the presence of catalysts such as clays and metal...展開 Dehydrated Castor Oil (DCO), Commercial Grade, is created when approximately 5% of the chemically combined water has been removed. Its drying properties are similar to those of Tung oil. Heating the oil in the presence of catalysts such as clays and metal oxides, phosphoric acid, and sulfuric acid, is where dehydration is carried out. Dehydrated Castor Oil (DCO), Commercial Grade has a characteristic odor and is a yellow oily liquid. It has an acid value of 6 mg KOH/g max and a Poise viscosity (25°C) of 1.6 to 2.8. Dehydrated castor oil is a unique drying oil, which imparts fine gloss, toughness, good flexibility, adhesion, chemical and water resistance to the dry paint film with non-yellowing properties. DCO is a very suitable for Linseed oil. Using DCO with paints offer superior finish and are super white. Applications are as a primary binder for enamels, house paints, sealants, caulks, and inks. 收起 | |
| Dehydrated Castor Oil (DCO), Pale Grade | Castor International BV | Dehydrated Castor Oil (DCO), Pale Grade, is created when approximately 5% of the chemically combined water has been removed. Its drying properties are similar to those of Tung oil. Heating the oil in the presence of catalysts such as clays and metal oxide...展開 Dehydrated Castor Oil (DCO), Pale Grade, is created when approximately 5% of the chemically combined water has been removed. Its drying properties are similar to those of Tung oil. Heating the oil in the presence of catalysts such as clays and metal oxides, phosphoric acid, and sulfuric acid, is where dehydration is carried out. Dehydrated Castor Oil (DCO), Pale Grade has a characteristic odor and is a yellow oily liquid. It has a Poise viscosity (25°C) of 1.6 to 2.8. Dehydrated castor oil is a unique drying oil, which imparts fine gloss, toughness, good flexibility, adhesion, and chemical and water resistance to the dry paint film with non-yellowing properties. DCO is a very suitable for Linseed oil. Using DCO with paints offer superior finish and are super white. Applications are as a primary binder for enamels, house paints, sealants, caulks, and inks. 收起 | |
| Dehydrated Castor Oil (DCO), Special Grade | Castor International BV | Dehydrated Castor Oil (DCO), Special Grade, is created when approximately 5% of the chemically combined water has been removed. Its drying properties are similar to those of Tung oil. Heating the oil in the presence of catalysts such as clays and metal ox...展開 Dehydrated Castor Oil (DCO), Special Grade, is created when approximately 5% of the chemically combined water has been removed. Its drying properties are similar to those of Tung oil. Heating the oil in the presence of catalysts such as clays and metal oxides, phosphoric acid, and sulfuric acid, is where dehydration is carried out. Dehydrated Castor Oil (DCO), Special Grade has a characteristic odor and is a yellow oily liquid. It has an acid value of 4 mg KOH/g max and a Poise viscosity (25°C) of 1.6 to 2.8. Dehydrated castor oil is a unique drying oil, which imparts fine gloss, toughness, good flexibility, adhesion, and chemical and water resistance to the dry paint film with non-yellowing properties. DCO is a very suitable for Linseed oil. Using DCO with paints offer superior finish and are super white. Applications are as a primary binder for enamels, house paints, sealants, caulks, and inks. 收起 | |
| Dehydrated Castor Oil Fatty Acid (DCOFA), High | Castor International BV | Dehydrated Castor Oil Fatty Acid (DCOFA), Medium is a high diene fatty acid. DCOFA is a liquid that has a white to pale yellow color. Its linoleic acid (non-conjugated) is 25% to 30%, linoleic acid (conjugated) is 60% to 66%, and the conjugation by UV spe...展開 Dehydrated Castor Oil Fatty Acid (DCOFA), Medium is a high diene fatty acid. DCOFA is a liquid that has a white to pale yellow color. Its linoleic acid (non-conjugated) is 25% to 30%, linoleic acid (conjugated) is 60% to 66%, and the conjugation by UV spectrometer of 50 min. Dehydrated castor oil fatty acid based alkyd resins and polyamides make up superior constituent in numerous print inks and paint formulations. DCOFA is also used in the manufacture of high solid alkyds, acrylic and epoxy ester resins, which are useful for appliance finishes, automotive topcoats, coil coatings, primers, interior and exterior can coatings, tube coatings, overprint varnishes, marine finishes and high-speed printing inks. 收起 | |
| Dehydrated Castor Oil Fatty Acid (DCOFA), Low | Castor International BV | Dehydrated Castor Oil Fatty Acid (DCOFA), Low is a high diene fatty acid. DCOFA is a liquid that has a white to pale yellow color. Its linoleic acid (non-conjugated) is 45% to 55%, linoleic acid (conjugated) is 35% to 45%, and the conjugation by UV spectr...展開 Dehydrated Castor Oil Fatty Acid (DCOFA), Low is a high diene fatty acid. DCOFA is a liquid that has a white to pale yellow color. Its linoleic acid (non-conjugated) is 45% to 55%, linoleic acid (conjugated) is 35% to 45%, and the conjugation by UV spectrometer of 50 min. Dehydrated castor oil fatty acid based alkyd resins and polyamides make up superior constituent in numerous print inks and paint formulations. DCOFA is also used in the manufacture of high solid alkyds, acrylic and epoxy ester resins, which are useful for appliance finishes, automotive topcoats, coil coatings, primers, interior and exterior can coatings, tube coatings, overprint varnishes, marine finishes and high-speed printing inks. 收起 | |
| Dehydrated Castor Oil Fatty Acid (DCOFA), Medium | Castor International BV | Dehydrated Castor Oil Fatty Acid (DCOFA), Medium is a high diene fatty acid. DCOFA is a liquid that has a white to pale yellow color. Its linoleic acid (non-conjugated) is 30% to 45%, linoleic acid (conjugated) is 45% to 60%, and the conjugation by UV spe...展開 Dehydrated Castor Oil Fatty Acid (DCOFA), Medium is a high diene fatty acid. DCOFA is a liquid that has a white to pale yellow color. Its linoleic acid (non-conjugated) is 30% to 45%, linoleic acid (conjugated) is 45% to 60%, and the conjugation by UV spectrometer of 50 min. Dehydrated castor oil fatty acid based alkyd resins and polyamides make up superior constituent in numerous print inks and paint formulations. DCOFA is also used in the manufacture of high solid alkyds, acrylic and epoxy ester resins, which are useful for appliance finishes, automotive topcoats, coil coatings, primers, interior and exterior can coatings, tube coatings, overprint varnishes, marine finishes and high-speed printing inks. 收起 | |
| Fluorcolor 2700 BLM | Fluorcolors Pigmentos industria e comercio Ltda. | Fluorcolor 2700 BLM is a blue vivid fluorescent liquid dispersion. This product is most commonly used in waterborne coating, water based ink, and paper coating applications. It has a good wash resistance and a viscosity of 400-1000 cps. | |
| Fluorcolor 2700 GRM | Fluorcolors Pigmentos industria e comercio Ltda. | Fluorcolor 2700 GRM is a green vivid fluorescent liquid dispersion. This product is most commonly used in waterborne coating, water based ink, and paper coating applications. It has a good wash resistance and a viscosity of 400-1000 cps. | |
| Fluorcolor 2700 MGT | Fluorcolors Pigmentos industria e comercio Ltda. | Fluorcolor 2700 MGT is a pink vivid fluorescent liquid dispersion. This product is most commonly used in waterborne coating, water based ink, and paper coating applications. It has a good wash resistance and a viscosity of 400-1000 cps. | |
| Fluorcolor 2700 MMG | Fluorcolors Pigmentos industria e comercio Ltda. | Fluorcolor 2700 MMG is a magenta vivid fluorescent liquid dispersion. This product is most commonly used in waterborne coating, water based ink, and paper coating applications. It has a good wash resistance and a viscosity of 400-1000 cps. | |
| Fluorcolor 2700 ORG | Fluorcolors Pigmentos industria e comercio Ltda. | Fluorcolor 2700 ORG is a yellowish orange vivid fluorescent liquid dispersion. This product is most commonly used in waterborne coating, water based ink, and paper coating applications. It has a good wash resistance and a viscosity of 400-1000 cps. | |
| Fluorcolor 2700 ORM | Fluorcolors Pigmentos industria e comercio Ltda. | Fluorcolor 2700 ORM is an orange vivid fluorescent liquid dispersion. This product is most commonly used in waterborne coating, water based ink, and paper coating applications.It has a good wash resistance and a viscosity of 400-1000 cps. | |
| Fluorcolor 2700 RDM | Fluorcolors Pigmentos industria e comercio Ltda. | Fluorcolor 2700 RDM is an orange red vivid fluorescent liquid dispersion. This product is most commonly used in waterborne coating, water based ink, and paper coating applications. It has a good wash resistance and a viscosity of 400-1000 cps. | |
| Fluorcolor 2700 RED | Fluorcolors Pigmentos industria e comercio Ltda. | Fluorcolor 2700 RED is a red vivid fluorescent liquid dispersion. This product is most commonly used in waterborne coating, water based ink, and paper coating applications. It has a good wash resistance and a viscosity of 400-1000 cps. | |
| Fluorcolor 2700 VLT | Fluorcolors Pigmentos industria e comercio Ltda. | Fluorcolor 2700 VLT is a violet vivid fluorescent liquid dispersion. This product is most commonly used in waterborne coating, water based ink, and paper coating applications. It has a good wash resistance and a viscosity of 400-1000 cps. | |
| Fluorcolor 2700 YLW | Fluorcolors Pigmentos industria e comercio Ltda. | Fluorcolor 2700 YLW is a yellow vivid fluorescent liquid dispersion. This product is most commonly used in waterborne coating, water based ink, and paper coating applications. It has a good wash resistance and a viscosity of 400-1000 cps. | |
| Hydrogenated Castor Oil (HCO) | Castor International BV | Hydrogenated Castor Oil (HCO) is a compound attained by the hydrogenation of refined castor oil. It is a hard, waxy, white to cream colored product with a high melting point of 83 to 87 C°, and is nearly tasteless and odorless. There are numerous applicat...展開 Hydrogenated Castor Oil (HCO) is a compound attained by the hydrogenation of refined castor oil. It is a hard, waxy, white to cream colored product with a high melting point of 83 to 87 C°, and is nearly tasteless and odorless. There are numerous applications in various industrial segments, such as a slip additive in paints, plastics (PE), and inks and as a dispersing agent in carbon papers, inks, and plastic color master batches and as a dispersing additive and flow control in sealants, hot-melt adhesives, powder coatings, and more. 收起 | |
| Luxcor 200 AML | Fluorcolors Pigmentos industria e comercio Ltda. | Luxcor 200 AML is a yellow fine powder with intense color. This product is most commonly used in paints and inks, and has good solvent resistance. | |
| Luxcor 200 AZL | Fluorcolors Pigmentos industria e comercio Ltda. | Luxcor 200 AZL is a blue fine powder with intense color. This product is most commonly used in paints and inks, and has good solvent resistance. | |
| Luxcor 200 LRJ | Fluorcolors Pigmentos industria e comercio Ltda. | Luxcor 200 LRJ is an orange fine powder with intense color. This product is most commonly used in paints and inks, and has good solvent resistance. | |
| Luxcor 200 LRM | Fluorcolors Pigmentos industria e comercio Ltda. | Luxcor 200 LRM is a yellowish orange fine powder with intense color. This product is most commonly used in paints and inks, and has good solvent resistance. | |
| Luxcor 200 MGT | Fluorcolors Pigmentos industria e comercio Ltda. | Luxcor 200 MGT is a pink fine powder with intense color. This product is most commonly used in paints and inks, and has good solvent resistance. | |
| Luxcor 200 MMG | Fluorcolors Pigmentos industria e comercio Ltda. | Luxcor 200 MMG is a magenta fine powder with intense color. This product is most commonly used in paints and inks, and has good solvent resistance. | |
| Luxcor 200 VLT | Fluorcolors Pigmentos industria e comercio Ltda. | Luxcor 200 VLT is a violet fine powder with intense color. This product is most commonly used in paints and inks, and has good solvent resistance. | |
| Luxcor 200 VML | Fluorcolors Pigmentos industria e comercio Ltda. | Luxcor 200 VML is a red 2 fine powder with intense color. This product is most commonly used in paints and inks, and has good solvent resistance. | |
| Luxcor 200 VMM | Fluorcolors Pigmentos industria e comercio Ltda. | Luxcor 200 VMM is a red 1 fine powder with intense color. This product is most commonly used in paints and inks, and has good solvent resistance. | |
| Luxcor 200 VRD | Fluorcolors Pigmentos industria e comercio Ltda. | Luxcor 200 VRD is a green fine powder with intense color. This product is most commonly used in paints and inks, and has good solvent resistance. | |
| Luxcor 500 AML | Fluorcolors Pigmentos industria e comercio Ltda. | Luxcor 500 AML is a yellow thick powder with intense color. This product is most commonly used in flexo inks and rotogravure applications. It has a high color strength and a density of 1.4 g/cm3. | |
| Luxcor 500 MGT | Fluorcolors Pigmentos industria e comercio Ltda. | Luxcor 500 MGT is a pink thick powder with intense color. This product is most commonly used in flexo inks and rotogravure applications. It has a high color strength and a density of 1.4 g/cm3. | |
| Luxcor 500 VMM | Fluorcolors Pigmentos industria e comercio Ltda. | Luxcor 500 VMM is a red 1 thick powder with intense color. This product is most commonly used in flexo inks and rotogravure applications. It has a high color strength and a density of 1.4 g/cm3. | |
| Ricinoleic Acid (RA) | Castor International BV | Ricinoleic Acid (RA), prepared from castor oil, is an unsaturated fatty acid viscous liquid that has a clear, yellowish appearance and an acid value of 175 mg KOH/g min. There are numerous applications in various industrial segments, such as soaps: metal ...展開 Ricinoleic Acid (RA), prepared from castor oil, is an unsaturated fatty acid viscous liquid that has a clear, yellowish appearance and an acid value of 175 mg KOH/g min. There are numerous applications in various industrial segments, such as soaps: metal working fluids, cutting oils, emulsifiers, and industrial lubricants; Surface coating: used as a pigment/dye dispersants in plastics, inks, coatings, etc.; Textiles: providing surface wetting and lubricity, and polarity. 收起 | |
| Sulphonated Castor Oil (SCO) | Castor International BV | Sulphonated Castor Oil (SCO), an anionic surfactant, has a purity of 75% with a non-volatile content of 70 to 85% and free fatty acid of 30 % max. It has many applications where it functions as a dispersing agent, detergent, wetting agent, and leveling ag...展開 Sulphonated Castor Oil (SCO), an anionic surfactant, has a purity of 75% with a non-volatile content of 70 to 85% and free fatty acid of 30 % max. It has many applications where it functions as a dispersing agent, detergent, wetting agent, and leveling agent. Sulphonated Castor Oil (SCO) is used as a dispersion and pigment wetting application in the paint industry, and as leveling and dye dispersion in the inks industry, among others. 收起 | |
| Sample Center Program | Chemical Marketing Concepts, Inc. | From our state-of-the-art warehouse and distribution sites strategically located in the U.S., Europe and Asia we have processed over 6.5 million sample shipments. We ship over 90% of our orders within 24 hours! |  |
| Small Package Sales Program | Chemical Marketing Concepts, Inc. | CMC offers small order sales of your material through our Small Package Sales Program. We can take orders directly from you or your customer for the purchase of samples, gallons, 5 gallon pails or other small sizes of products that you have designated for...展開 CMC offers small order sales of your material through our Small Package Sales Program. We can take orders directly from you or your customer for the purchase of samples, gallons, 5 gallon pails or other small sizes of products that you have designated for a revenue stream. 收起 |  |
