| 12-Hydroxy Stearic Acid (12-HSA) | Castor International BV | 12-Hydroxy Stearic Acid (12-HSA) is a saturated hydroxyl fatty acid that is a hard, waxy, cream colored product in the form of flakes or powder, and is nearly tasteless and odorless. 12-HSA reacts with acrylic esters to produce durable, hard thermosetting...展開 12-Hydroxy Stearic Acid (12-HSA) is a saturated hydroxyl fatty acid that is a hard, waxy, cream colored product in the form of flakes or powder, and is nearly tasteless and odorless. 12-HSA reacts with acrylic esters to produce durable, hard thermosetting polymers used as a coating in metal decorative finishes, industrial appliance, and high quality automotive, and is a useful component in hot-melt adhesives, inks, and polishes. 收起 | |
| Blown Castor Oil (BCO) | Castor International BV | Blown Castor Oil (BCO) (also known as: oxidized castor oil, polymerized castor oil, caster stand oil) is a golden yellow to honey colored viscous liquid. Blown Castor Oil (BCO) has an acid value of 3 to 25 mg KOH/g and a viscosity of 15 to 17 Poise. There...展開 Blown Castor Oil (BCO) (also known as: oxidized castor oil, polymerized castor oil, caster stand oil) is a golden yellow to honey colored viscous liquid. Blown Castor Oil (BCO) has an acid value of 3 to 25 mg KOH/g and a viscosity of 15 to 17 Poise. There are numerous applications in various industrial segments, such as adhesives (hot-melt and solution): plasticizer and coupling solvent for resins and modifiers; inks: resin and binder plasticizer, medium for dispersion of pigments and dyes; sealants and caulks: flexibility, penetration, adhesion. 收起 | |
| Dehydrated Castor Oil (DCO), Commercial Grade | Castor International BV | Dehydrated Castor Oil (DCO), Commercial Grade, is created when approximately 5% of the chemically combined water has been removed. Its drying properties are similar to those of Tung oil. Heating the oil in the presence of catalysts such as clays and metal...展開 Dehydrated Castor Oil (DCO), Commercial Grade, is created when approximately 5% of the chemically combined water has been removed. Its drying properties are similar to those of Tung oil. Heating the oil in the presence of catalysts such as clays and metal oxides, phosphoric acid, and sulfuric acid, is where dehydration is carried out. Dehydrated Castor Oil (DCO), Commercial Grade has a characteristic odor and is a yellow oily liquid. It has an acid value of 6 mg KOH/g max and a Poise viscosity (25°C) of 1.6 to 2.8. Dehydrated castor oil is a unique drying oil, which imparts fine gloss, toughness, good flexibility, adhesion, chemical and water resistance to the dry paint film with non-yellowing properties. DCO is a very suitable for Linseed oil. Using DCO with paints offer superior finish and are super white. Applications are as a primary binder for enamels, house paints, sealants, caulks, and inks. 收起 | |
| Dehydrated Castor Oil (DCO), Pale Grade | Castor International BV | Dehydrated Castor Oil (DCO), Pale Grade, is created when approximately 5% of the chemically combined water has been removed. Its drying properties are similar to those of Tung oil. Heating the oil in the presence of catalysts such as clays and metal oxide...展開 Dehydrated Castor Oil (DCO), Pale Grade, is created when approximately 5% of the chemically combined water has been removed. Its drying properties are similar to those of Tung oil. Heating the oil in the presence of catalysts such as clays and metal oxides, phosphoric acid, and sulfuric acid, is where dehydration is carried out. Dehydrated Castor Oil (DCO), Pale Grade has a characteristic odor and is a yellow oily liquid. It has a Poise viscosity (25°C) of 1.6 to 2.8. Dehydrated castor oil is a unique drying oil, which imparts fine gloss, toughness, good flexibility, adhesion, and chemical and water resistance to the dry paint film with non-yellowing properties. DCO is a very suitable for Linseed oil. Using DCO with paints offer superior finish and are super white. Applications are as a primary binder for enamels, house paints, sealants, caulks, and inks. 收起 | |
| Dehydrated Castor Oil (DCO), Special Grade | Castor International BV | Dehydrated Castor Oil (DCO), Special Grade, is created when approximately 5% of the chemically combined water has been removed. Its drying properties are similar to those of Tung oil. Heating the oil in the presence of catalysts such as clays and metal ox...展開 Dehydrated Castor Oil (DCO), Special Grade, is created when approximately 5% of the chemically combined water has been removed. Its drying properties are similar to those of Tung oil. Heating the oil in the presence of catalysts such as clays and metal oxides, phosphoric acid, and sulfuric acid, is where dehydration is carried out. Dehydrated Castor Oil (DCO), Special Grade has a characteristic odor and is a yellow oily liquid. It has an acid value of 4 mg KOH/g max and a Poise viscosity (25°C) of 1.6 to 2.8. Dehydrated castor oil is a unique drying oil, which imparts fine gloss, toughness, good flexibility, adhesion, and chemical and water resistance to the dry paint film with non-yellowing properties. DCO is a very suitable for Linseed oil. Using DCO with paints offer superior finish and are super white. Applications are as a primary binder for enamels, house paints, sealants, caulks, and inks. 收起 | |
| Dehydrated Castor Oil Fatty Acid (DCOFA), High | Castor International BV | Dehydrated Castor Oil Fatty Acid (DCOFA), Medium is a high diene fatty acid. DCOFA is a liquid that has a white to pale yellow color. Its linoleic acid (non-conjugated) is 25% to 30%, linoleic acid (conjugated) is 60% to 66%, and the conjugation by UV spe...展開 Dehydrated Castor Oil Fatty Acid (DCOFA), Medium is a high diene fatty acid. DCOFA is a liquid that has a white to pale yellow color. Its linoleic acid (non-conjugated) is 25% to 30%, linoleic acid (conjugated) is 60% to 66%, and the conjugation by UV spectrometer of 50 min. Dehydrated castor oil fatty acid based alkyd resins and polyamides make up superior constituent in numerous print inks and paint formulations. DCOFA is also used in the manufacture of high solid alkyds, acrylic and epoxy ester resins, which are useful for appliance finishes, automotive topcoats, coil coatings, primers, interior and exterior can coatings, tube coatings, overprint varnishes, marine finishes and high-speed printing inks. 收起 | |
| Dehydrated Castor Oil Fatty Acid (DCOFA), Low | Castor International BV | Dehydrated Castor Oil Fatty Acid (DCOFA), Low is a high diene fatty acid. DCOFA is a liquid that has a white to pale yellow color. Its linoleic acid (non-conjugated) is 45% to 55%, linoleic acid (conjugated) is 35% to 45%, and the conjugation by UV spectr...展開 Dehydrated Castor Oil Fatty Acid (DCOFA), Low is a high diene fatty acid. DCOFA is a liquid that has a white to pale yellow color. Its linoleic acid (non-conjugated) is 45% to 55%, linoleic acid (conjugated) is 35% to 45%, and the conjugation by UV spectrometer of 50 min. Dehydrated castor oil fatty acid based alkyd resins and polyamides make up superior constituent in numerous print inks and paint formulations. DCOFA is also used in the manufacture of high solid alkyds, acrylic and epoxy ester resins, which are useful for appliance finishes, automotive topcoats, coil coatings, primers, interior and exterior can coatings, tube coatings, overprint varnishes, marine finishes and high-speed printing inks. 收起 | |
| Dehydrated Castor Oil Fatty Acid (DCOFA), Medium | Castor International BV | Dehydrated Castor Oil Fatty Acid (DCOFA), Medium is a high diene fatty acid. DCOFA is a liquid that has a white to pale yellow color. Its linoleic acid (non-conjugated) is 30% to 45%, linoleic acid (conjugated) is 45% to 60%, and the conjugation by UV spe...展開 Dehydrated Castor Oil Fatty Acid (DCOFA), Medium is a high diene fatty acid. DCOFA is a liquid that has a white to pale yellow color. Its linoleic acid (non-conjugated) is 30% to 45%, linoleic acid (conjugated) is 45% to 60%, and the conjugation by UV spectrometer of 50 min. Dehydrated castor oil fatty acid based alkyd resins and polyamides make up superior constituent in numerous print inks and paint formulations. DCOFA is also used in the manufacture of high solid alkyds, acrylic and epoxy ester resins, which are useful for appliance finishes, automotive topcoats, coil coatings, primers, interior and exterior can coatings, tube coatings, overprint varnishes, marine finishes and high-speed printing inks. 收起 | |
| Hydrogenated Castor Oil (HCO) | Castor International BV | Hydrogenated Castor Oil (HCO) is a compound attained by the hydrogenation of refined castor oil. It is a hard, waxy, white to cream colored product with a high melting point of 83 to 87 C°, and is nearly tasteless and odorless. There are numerous applicat...展開 Hydrogenated Castor Oil (HCO) is a compound attained by the hydrogenation of refined castor oil. It is a hard, waxy, white to cream colored product with a high melting point of 83 to 87 C°, and is nearly tasteless and odorless. There are numerous applications in various industrial segments, such as a slip additive in paints, plastics (PE), and inks and as a dispersing agent in carbon papers, inks, and plastic color master batches and as a dispersing additive and flow control in sealants, hot-melt adhesives, powder coatings, and more. 收起 | |
| Ricinoleic Acid (RA) | Castor International BV | Ricinoleic Acid (RA), prepared from castor oil, is an unsaturated fatty acid viscous liquid that has a clear, yellowish appearance and an acid value of 175 mg KOH/g min. There are numerous applications in various industrial segments, such as soaps: metal ...展開 Ricinoleic Acid (RA), prepared from castor oil, is an unsaturated fatty acid viscous liquid that has a clear, yellowish appearance and an acid value of 175 mg KOH/g min. There are numerous applications in various industrial segments, such as soaps: metal working fluids, cutting oils, emulsifiers, and industrial lubricants; Surface coating: used as a pigment/dye dispersants in plastics, inks, coatings, etc.; Textiles: providing surface wetting and lubricity, and polarity. 收起 | |
| Sulphonated Castor Oil (SCO) | Castor International BV | Sulphonated Castor Oil (SCO), an anionic surfactant, has a purity of 75% with a non-volatile content of 70 to 85% and free fatty acid of 30 % max. It has many applications where it functions as a dispersing agent, detergent, wetting agent, and leveling ag...展開 Sulphonated Castor Oil (SCO), an anionic surfactant, has a purity of 75% with a non-volatile content of 70 to 85% and free fatty acid of 30 % max. It has many applications where it functions as a dispersing agent, detergent, wetting agent, and leveling agent. Sulphonated Castor Oil (SCO) is used as a dispersion and pigment wetting application in the paint industry, and as leveling and dye dispersion in the inks industry, among others. 收起 | |
| ASC Automatic Sample Changer | Anton Paar Viscosity & Rheology | 該ASC樣品自動進樣系統可一次同時全自動測量32個樣品，包括測量系統的清洗。可按照實驗室質量和精度進行質量控制和全流變學分析。 |  |
| FRS1600 Furnace Rheometer System | Anton Paar Viscosity & Rheology | 日常生活中所使用的材料，如玻璃和金屬，是在超過1000 °C的條件下處理或精煉熔化的。為了確保最終產品的始終一致的高品質以及優化能源密集型的過程，懂得熔體粘度是非常重要的。該熔爐流變儀系統(FRS 1600)結合流變儀和實驗室火爐可測量超過1600 °C。 |  |
| High-Throughput Rheometer HTR 301 | Anton Paar Viscosity & Rheology | HTR是第一台全自動流變儀。流變學測量是由高質量的MCR流變儀完成的，同時由一個機器人控制所有其他項目的測量。 |  |
| Lovis 2000 M/ME Rolling-Ball Viscometer | Anton Paar Viscosity & Rheology | Lovis 2000 M/ME是一款滾球式粘度計，通過透明或不透明的液體根據Hoepple的落球原則計算球的滾動時間。該方法只需要400微升的液體。結果可通過運動學粘度和動力學粘度呈現。該粘度計簡潔經濟，可節省實驗室的空間。是Anton Paar’s AMVn自動粘度計的更新版本。 |  |
| MCR Rheometer Series | Anton Paar Viscosity & Rheology | 該新的MCR流變儀擁有最新的技術。EC運動技術，低摩擦的軸承以及專利的正交力傳感器經過多年的優化可滿足最高的流變要求。任何類型的或組合的流變測試，轉動或振動模式，都可用MCR流變儀測量。該系統的模塊化設計，可適合寬廣的溫度范圍的裝置和特定程序的應用。 |  |
| RheoLabQC Quality Control Rheometer | Anton Paar Viscosity & Rheology | RheolabQC 是一款迄今最先進的質量控制流變儀，也可用於研發。結合了無與倫比的性能，易於操作以及穩健設計於一身。可執行從單點快速檢查流動曲線到屈服點確定等一系列複雜的流變控制。 |  |
| Rheometer Measuring Head | Anton Paar Viscosity & Rheology | 具有MCR流變儀性能的自定義流變測量儀器。其流變測量頭可用於自動化操作或超過實驗室流變儀要求的其他特殊測量目的。是工藝聯合或建立自定義流變儀系統的完美方案。該模塊裝置包含一個配備有知名馬達的測量頭以及MCR系列的空氣軸承，還有一個單獨的控制單元。 |  |
| RheoPlus Rheometer Software | Anton Paar Viscosity & Rheology | 易於使用，靈活且功能強大 - RheoPlus軟件用於所有Anton Paar流變儀，從質量控制儀器到高通量的流變儀。不同用戶可輕松切換方法模塊以及測量數據。該迄今為止最先進的軟件可提供大量的模板，自動測量以及在RheoManager上處理數據，一個LIM/SAP界面，和21 CFR 的11章的兼容。 |  |
