| 12-Hydroxy Stearic Acid (12-HSA) | Castor International BV | 12-Hydroxy Stearic Acid (12-HSA) is a saturated hydroxyl fatty acid that is a hard, waxy, cream colored product in the form of flakes or powder, and is nearly tasteless and odorless. 12-HSA reacts with acrylic esters to produce durable, hard thermosetting...展開 12-Hydroxy Stearic Acid (12-HSA) is a saturated hydroxyl fatty acid that is a hard, waxy, cream colored product in the form of flakes or powder, and is nearly tasteless and odorless. 12-HSA reacts with acrylic esters to produce durable, hard thermosetting polymers used as a coating in metal decorative finishes, industrial appliance, and high quality automotive, and is a useful component in hot-melt adhesives, inks, and polishes. 收起 | |
| Bisomer® Amine D700 | GEO Specialty Chemicals, Inc.TRIMET Products Group | 多功能氨基醇助劑 | |
| Bisomer® BZMA | GEO Specialty Chemicals, Inc.TRIMET Products Group | Bisomer® BZMA (Benzyl Methacrylate) is low viscosity mono-functional monomer suitable for a wide range of applications. It is low viscosity and hydrophobic, and is particularly suitable as a reactive diluent in adhesives, sealants, inks and coatings. This...展開 Bisomer® BZMA (Benzyl Methacrylate) is low viscosity mono-functional monomer suitable for a wide range of applications. It is low viscosity and hydrophobic, and is particularly suitable as a reactive diluent in adhesives, sealants, inks and coatings. This product has a methoxyhydroquinone content of 50 ± 5ppm, an acid number of < 0.02mg KOH/g, and a refractive index @ 20°C of 1.51. It can be used as a co-monomer in PMMA based acrylic formulations to increase the impact resistance, hydrophobicity and structural integrity of resins, composites and coatings. It is also particularly useful as a replacement for styrene in unsaturated polyester and vinyl ester resins used in a wide range of applications including chemical fixings and composites. Due to its high refractive index, Bisomer® BZMA is also suitable for cast lenses, optical fibres, transparent laminates and other applications where clarity is a key requirement. 收起 | |
| Bisomer® CHMA | GEO Specialty Chemicals, Inc.TRIMET Products Group | Bisomer® CHMA is a hydrophobic methacrylate monomer. It is a mono-functional methacrylate, making it ideal for acrylic polymer synthesis. Bisomer® CHMA can be used to improve the hydrophobicity, weathering, physical and chemical resistance of acrylic resi...展開 Bisomer® CHMA is a hydrophobic methacrylate monomer. It is a mono-functional methacrylate, making it ideal for acrylic polymer synthesis. Bisomer® CHMA can be used to improve the hydrophobicity, weathering, physical and chemical resistance of acrylic resins. This product is also a useful reactive diluent in 2K adhesives and coatings. 收起 | |
| Bisomer® CL HEMA | GEO Specialty Chemicals, Inc.TRIMET Products Group | Bisomer® CL HEMA (Hydroxyethyl Methacrylate) is widely used in the preparation of long-term wear or disposable contact lenses, intra-ocular lenses and diverse biomedical applications. It is an ideal starting point in the formulation of biomedical hydrogel...展開 Bisomer® CL HEMA (Hydroxyethyl Methacrylate) is widely used in the preparation of long-term wear or disposable contact lenses, intra-ocular lenses and diverse biomedical applications. It is an ideal starting point in the formulation of biomedical hydrogels. 收起 | |
| Bisomer® HEMA HP | GEO Specialty Chemicals, Inc.TRIMET Products Group | Bisomer® HEMA HP (Hydroxyethyl Methacrylate) is widely used in the preparation of long-term wear or disposable contact lenses, intra-ocular lenses and diverse biomedical applications. It is an ideal starting point in the formulation of biomedical hydrogel...展開 Bisomer® HEMA HP (Hydroxyethyl Methacrylate) is widely used in the preparation of long-term wear or disposable contact lenses, intra-ocular lenses and diverse biomedical applications. It is an ideal starting point in the formulation of biomedical hydrogels. 收起 | |
| Bisomer® LMA | GEO Specialty Chemicals, Inc.TRIMET Products Group | 憎水性單官能團甲基丙烯酸酯單體，具有低玻璃化轉變溫度（Tg），具有出色的柔韌性和增塑性 | |
| Bisomer® LMA 97SP | GEO Specialty Chemicals, Inc.TRIMET Products Group | Bisomer® LMA 97SP 是一款疏水，低玻璃態轉化溫度(Tg)的單功能丙烯酸甲酯單體。作為聚合型塑化劑使用時，展現出很好的可塑性。使用Bisomer® LMA 97SP的配方可以減少不同批次產品在粘度、顏料潤濕性、抗化學品性、附著力、硬度、剪切強度、粘性等性能上的差異性。 該產品是合成應用於工業塗料、印刷油墨、壓敏膠等領域的高質量丙烯酸樹脂的核心原料。 | |
| Bisomer® PEA 6 | GEO Specialty Chemicals, Inc.TRIMET Products Group | 特殊聚合物單體。是水溶性的，並提供了一種創新的途徑用於生產傳統和水性UV固化氨基甲酸酯丙烯酸酯齊聚物。作為HEA和HPA的替代物，它無毒、易於處理，列於歐洲現有商業化學品目錄（EINECS）的聚合物分類 | |
| Bisomer® PPA 6 | GEO Specialty Chemicals, Inc.TRIMET Products Group | 為制備UV固化氨基甲酸酯丙烯酸酯齊聚物提供了一種非常規的途徑。它是用於基於氨基甲酸酯丙烯酸酯和乙烯基酯（環氧乙烯基酯）UV體系的出色的低收縮反應性稀釋劑 | |
| Blown Castor Oil (BCO) | Castor International BV | Blown Castor Oil (BCO) (also known as: oxidized castor oil, polymerized castor oil, caster stand oil) is a golden yellow to honey colored viscous liquid. Blown Castor Oil (BCO) has an acid value of 3 to 25 mg KOH/g and a viscosity of 15 to 17 Poise. There...展開 Blown Castor Oil (BCO) (also known as: oxidized castor oil, polymerized castor oil, caster stand oil) is a golden yellow to honey colored viscous liquid. Blown Castor Oil (BCO) has an acid value of 3 to 25 mg KOH/g and a viscosity of 15 to 17 Poise. There are numerous applications in various industrial segments, such as adhesives (hot-melt and solution): plasticizer and coupling solvent for resins and modifiers; inks: resin and binder plasticizer, medium for dispersion of pigments and dyes; sealants and caulks: flexibility, penetration, adhesion. 收起 | |
| Dehydrated Castor Oil (DCO), Commercial Grade | Castor International BV | Dehydrated Castor Oil (DCO), Commercial Grade, is created when approximately 5% of the chemically combined water has been removed. Its drying properties are similar to those of Tung oil. Heating the oil in the presence of catalysts such as clays and metal...展開 Dehydrated Castor Oil (DCO), Commercial Grade, is created when approximately 5% of the chemically combined water has been removed. Its drying properties are similar to those of Tung oil. Heating the oil in the presence of catalysts such as clays and metal oxides, phosphoric acid, and sulfuric acid, is where dehydration is carried out. Dehydrated Castor Oil (DCO), Commercial Grade has a characteristic odor and is a yellow oily liquid. It has an acid value of 6 mg KOH/g max and a Poise viscosity (25°C) of 1.6 to 2.8. Dehydrated castor oil is a unique drying oil, which imparts fine gloss, toughness, good flexibility, adhesion, chemical and water resistance to the dry paint film with non-yellowing properties. DCO is a very suitable for Linseed oil. Using DCO with paints offer superior finish and are super white. Applications are as a primary binder for enamels, house paints, sealants, caulks, and inks. 收起 | |
| Dehydrated Castor Oil (DCO), Pale Grade | Castor International BV | Dehydrated Castor Oil (DCO), Pale Grade, is created when approximately 5% of the chemically combined water has been removed. Its drying properties are similar to those of Tung oil. Heating the oil in the presence of catalysts such as clays and metal oxide...展開 Dehydrated Castor Oil (DCO), Pale Grade, is created when approximately 5% of the chemically combined water has been removed. Its drying properties are similar to those of Tung oil. Heating the oil in the presence of catalysts such as clays and metal oxides, phosphoric acid, and sulfuric acid, is where dehydration is carried out. Dehydrated Castor Oil (DCO), Pale Grade has a characteristic odor and is a yellow oily liquid. It has a Poise viscosity (25°C) of 1.6 to 2.8. Dehydrated castor oil is a unique drying oil, which imparts fine gloss, toughness, good flexibility, adhesion, and chemical and water resistance to the dry paint film with non-yellowing properties. DCO is a very suitable for Linseed oil. Using DCO with paints offer superior finish and are super white. Applications are as a primary binder for enamels, house paints, sealants, caulks, and inks. 收起 | |
| Dehydrated Castor Oil (DCO), Special Grade | Castor International BV | Dehydrated Castor Oil (DCO), Special Grade, is created when approximately 5% of the chemically combined water has been removed. Its drying properties are similar to those of Tung oil. Heating the oil in the presence of catalysts such as clays and metal ox...展開 Dehydrated Castor Oil (DCO), Special Grade, is created when approximately 5% of the chemically combined water has been removed. Its drying properties are similar to those of Tung oil. Heating the oil in the presence of catalysts such as clays and metal oxides, phosphoric acid, and sulfuric acid, is where dehydration is carried out. Dehydrated Castor Oil (DCO), Special Grade has a characteristic odor and is a yellow oily liquid. It has an acid value of 4 mg KOH/g max and a Poise viscosity (25°C) of 1.6 to 2.8. Dehydrated castor oil is a unique drying oil, which imparts fine gloss, toughness, good flexibility, adhesion, and chemical and water resistance to the dry paint film with non-yellowing properties. DCO is a very suitable for Linseed oil. Using DCO with paints offer superior finish and are super white. Applications are as a primary binder for enamels, house paints, sealants, caulks, and inks. 收起 | |
| Dehydrated Castor Oil Fatty Acid (DCOFA), High | Castor International BV | Dehydrated Castor Oil Fatty Acid (DCOFA), Medium is a high diene fatty acid. DCOFA is a liquid that has a white to pale yellow color. Its linoleic acid (non-conjugated) is 25% to 30%, linoleic acid (conjugated) is 60% to 66%, and the conjugation by UV spe...展開 Dehydrated Castor Oil Fatty Acid (DCOFA), Medium is a high diene fatty acid. DCOFA is a liquid that has a white to pale yellow color. Its linoleic acid (non-conjugated) is 25% to 30%, linoleic acid (conjugated) is 60% to 66%, and the conjugation by UV spectrometer of 50 min. Dehydrated castor oil fatty acid based alkyd resins and polyamides make up superior constituent in numerous print inks and paint formulations. DCOFA is also used in the manufacture of high solid alkyds, acrylic and epoxy ester resins, which are useful for appliance finishes, automotive topcoats, coil coatings, primers, interior and exterior can coatings, tube coatings, overprint varnishes, marine finishes and high-speed printing inks. 收起 | |
| Dehydrated Castor Oil Fatty Acid (DCOFA), Low | Castor International BV | Dehydrated Castor Oil Fatty Acid (DCOFA), Low is a high diene fatty acid. DCOFA is a liquid that has a white to pale yellow color. Its linoleic acid (non-conjugated) is 45% to 55%, linoleic acid (conjugated) is 35% to 45%, and the conjugation by UV spectr...展開 Dehydrated Castor Oil Fatty Acid (DCOFA), Low is a high diene fatty acid. DCOFA is a liquid that has a white to pale yellow color. Its linoleic acid (non-conjugated) is 45% to 55%, linoleic acid (conjugated) is 35% to 45%, and the conjugation by UV spectrometer of 50 min. Dehydrated castor oil fatty acid based alkyd resins and polyamides make up superior constituent in numerous print inks and paint formulations. DCOFA is also used in the manufacture of high solid alkyds, acrylic and epoxy ester resins, which are useful for appliance finishes, automotive topcoats, coil coatings, primers, interior and exterior can coatings, tube coatings, overprint varnishes, marine finishes and high-speed printing inks. 收起 | |
| Dehydrated Castor Oil Fatty Acid (DCOFA), Medium | Castor International BV | Dehydrated Castor Oil Fatty Acid (DCOFA), Medium is a high diene fatty acid. DCOFA is a liquid that has a white to pale yellow color. Its linoleic acid (non-conjugated) is 30% to 45%, linoleic acid (conjugated) is 45% to 60%, and the conjugation by UV spe...展開 Dehydrated Castor Oil Fatty Acid (DCOFA), Medium is a high diene fatty acid. DCOFA is a liquid that has a white to pale yellow color. Its linoleic acid (non-conjugated) is 30% to 45%, linoleic acid (conjugated) is 45% to 60%, and the conjugation by UV spectrometer of 50 min. Dehydrated castor oil fatty acid based alkyd resins and polyamides make up superior constituent in numerous print inks and paint formulations. DCOFA is also used in the manufacture of high solid alkyds, acrylic and epoxy ester resins, which are useful for appliance finishes, automotive topcoats, coil coatings, primers, interior and exterior can coatings, tube coatings, overprint varnishes, marine finishes and high-speed printing inks. 收起 | |
| DMPA® Dimethylolpropionic Acid | GEO Specialty Chemicals, Inc.TRIMET Products Group | 產品技術指導 - 一種獨特和多用途的位阻二醇分子，具羥基和羧基官能性。 | |
| DMPA® Polyol HA-0135 | GEO Specialty Chemicals, Inc.TRIMET Products Group | 是一種DMPA CHDA BDO己二酸聚酯樹脂，98%不揮發組分。它可作為水性體系的酸官能團來源和作為共樹脂改進顏料的潤濕、分散和穩定。 | |
| DMPA® Polyol HA-0135LV2 | GEO Specialty Chemicals, Inc.TRIMET Products Group | DMPA® Polyol HA-0135LV2是一種同時帶酸和羥基官能團的低結晶聚酯多醇。類似DMPA® Polyol HA-0135，該樹脂可消除在聚氨酯乳液生產過程中NMP作為加工溶劑的需球 | |
| Hydrogenated Castor Oil (HCO) | Castor International BV | Hydrogenated Castor Oil (HCO) is a compound attained by the hydrogenation of refined castor oil. It is a hard, waxy, white to cream colored product with a high melting point of 83 to 87 C°, and is nearly tasteless and odorless. There are numerous applicat...展開 Hydrogenated Castor Oil (HCO) is a compound attained by the hydrogenation of refined castor oil. It is a hard, waxy, white to cream colored product with a high melting point of 83 to 87 C°, and is nearly tasteless and odorless. There are numerous applications in various industrial segments, such as a slip additive in paints, plastics (PE), and inks and as a dispersing agent in carbon papers, inks, and plastic color master batches and as a dispersing additive and flow control in sealants, hot-melt adhesives, powder coatings, and more. 收起 | |
| Ricinoleic Acid (RA) | Castor International BV | Ricinoleic Acid (RA), prepared from castor oil, is an unsaturated fatty acid viscous liquid that has a clear, yellowish appearance and an acid value of 175 mg KOH/g min. There are numerous applications in various industrial segments, such as soaps: metal ...展開 Ricinoleic Acid (RA), prepared from castor oil, is an unsaturated fatty acid viscous liquid that has a clear, yellowish appearance and an acid value of 175 mg KOH/g min. There are numerous applications in various industrial segments, such as soaps: metal working fluids, cutting oils, emulsifiers, and industrial lubricants; Surface coating: used as a pigment/dye dispersants in plastics, inks, coatings, etc.; Textiles: providing surface wetting and lubricity, and polarity. 收起 | |
| Sulphonated Castor Oil (SCO) | Castor International BV | Sulphonated Castor Oil (SCO), an anionic surfactant, has a purity of 75% with a non-volatile content of 70 to 85% and free fatty acid of 30 % max. It has many applications where it functions as a dispersing agent, detergent, wetting agent, and leveling ag...展開 Sulphonated Castor Oil (SCO), an anionic surfactant, has a purity of 75% with a non-volatile content of 70 to 85% and free fatty acid of 30 % max. It has many applications where it functions as a dispersing agent, detergent, wetting agent, and leveling agent. Sulphonated Castor Oil (SCO) is used as a dispersion and pigment wetting application in the paint industry, and as leveling and dye dispersion in the inks industry, among others. 收起 | |
| TRI-REZ® Polyol 1030-60 Polyester Resin | GEO Specialty Chemicals, Inc.TRIMET Products Group | Tri-Rez 1030-60是一款非結晶、低黏度飽和線性聚脂多元醇，專門為聚氨酯基涂料、膠粘劑和泡沫配方體系設計。其疏水彈性結構，使其成為配制高固體份水基聚氨酯樹脂的理想多元醇。 | |
| TRI-REZ® Polyol 1030-90 Polyester Resin | GEO Specialty Chemicals, Inc.TRIMET Products Group | Tri-Rez 1030-90 是一款非結晶、低黏度飽和線性聚脂多元醇，專門為聚氨酯基涂料、膠粘劑和泡沫配方體系設計。其疏水彈性結構，使其成為配制高固體份水基聚氨酯樹脂的理想多元醇。 | |
| TRI-REZ® Polyol 1220A-300 Polyester Resin | GEO Specialty Chemicals, Inc.TRIMET Products Group | TRI-REZ® Polyol 1220A-300 is a 100% solids highly branched saturated polyester polyol based on TRIMET® TME (Trimethylolethane). The highly branched structure of TRI-REZ® Polyol 1220A-300 makes it an ideal choice for formulating two component, high solids ...展開 TRI-REZ® Polyol 1220A-300 is a 100% solids highly branched saturated polyester polyol based on TRIMET® TME (Trimethylolethane). The highly branched structure of TRI-REZ® Polyol 1220A-300 makes it an ideal choice for formulating two component, high solids polyurethane coatings and elastomers that require excellent UV and chemical resistance properties. 收起 | |
| TRI-REZ® Polyol 1230-60 Polyester Resin | GEO Specialty Chemicals, Inc.TRIMET Products Group | Tri-Rez 1230-60 是一款非晶狀飽和線性聚脂多元醇，專門為聚氨酯體系涂料、膠粘劑和泡沫設計。其疏水彈性結構使其成為配制高固體份水基聚氨酯樹脂的理想多元醇。 | |
| TRI-REZ® Polyol 1230-90 Polyester Resin | GEO Specialty Chemicals, Inc.TRIMET Products Group | Tri-Rez 1230-90 是一款非低黏度飽和線性聚脂多元醇，專門為聚氨酯體系涂料、膠粘劑和泡沫設計。其疏水彈性結構使其成為配制高固體份水基聚氨酯樹脂的理想多元醇。 |
