| Alpha-Rez™ 3500 E | Lawter | Alpha-Rez™ 3500 E is a low viscous, modified hydrocarbon resin that has high solubility and displays a good gel response to aluminum gelling agents. It also has a lower water pick-up and functions as a water balance regulator. The product has ideal pigmen...展開 Alpha-Rez™ 3500 E is a low viscous, modified hydrocarbon resin that has high solubility and displays a good gel response to aluminum gelling agents. It also has a lower water pick-up and functions as a water balance regulator. The product has ideal pigment wetting properties causing inks to display a higher gloss. It is used in offset, grinding varnishes and letterpress applications. 收起 | |
| Alpha-Rez™ 3750 E | Lawter | Alpha-Rez™ 3750 E is a modified hydrocarbon resin with a medium soluble, medium viscous resin that displays a low water pick-up and is ideal for use as a water balance regulator. It shows good pigment wetting properties with a high ink gloss. It is used i...展開 Alpha-Rez™ 3750 E is a modified hydrocarbon resin with a medium soluble, medium viscous resin that displays a low water pick-up and is ideal for use as a water balance regulator. It shows good pigment wetting properties with a high ink gloss. It is used in offset, sheet-fed offset and grinding varnishes. 收起 | |
| Alpha-Rez™ 9000 E | Lawter | Alpha-Rez™ 9000 E is a hybrid resin with a high viscosity and high solubility that is suitable for use in high speed presses. It displays ideal water balance and has the benefit of having low tack and low misting properties. The product is used in offset,...展開 Alpha-Rez™ 9000 E is a hybrid resin with a high viscosity and high solubility that is suitable for use in high speed presses. It displays ideal water balance and has the benefit of having low tack and low misting properties. The product is used in offset, sheet-fed and gloss offset as well as letterpress applications. 收起 | |
| Alpha-Rez™ 9250 E | Lawter | Alpha-Rez™ 9250 E is a hybrid resin composed of visco-elastic hydrocarbons and hybrid resins that display a high viscosity and medium solubility. The product has good water balance, low misting and low tack properties. It can be used in offset inks using ...展開 Alpha-Rez™ 9250 E is a hybrid resin composed of visco-elastic hydrocarbons and hybrid resins that display a high viscosity and medium solubility. The product has good water balance, low misting and low tack properties. It can be used in offset inks using fast-running printing processes. 收起 | |
| AW 300 | AB Chimica srl | AW 300, in the form of a paste, is pigment dispersion with the dispersion medium of water soluble acrylic resin, and has 68% of pigment type titanium dioxide. The AW 300 series is regarded as a non-yellowing acrylic resin that is very resistant with high ...展開 AW 300, in the form of a paste, is pigment dispersion with the dispersion medium of water soluble acrylic resin, and has 68% of pigment type titanium dioxide. The AW 300 series is regarded as a non-yellowing acrylic resin that is very resistant with high wetting power. The high level of grinding fineness with the high concentration of pigments makes it possible to attain a very glossy finished product. AW 300 is compatible with acrylic emulsions with applications in industrial and decorative coatings, water-based inks for laminates, water-based wood stains. 收起 | |
| AW 304 | AB Chimica srl | AW 304, in the form of a paste, is pigment dispersion with the dispersion medium of water soluble acrylic resin, and has 40% of pigment type of blue beta copper phthalocyanine NCNF. The AW 300 series is regarded as a non-yellowing acrylic resin that is ve...展開 AW 304, in the form of a paste, is pigment dispersion with the dispersion medium of water soluble acrylic resin, and has 40% of pigment type of blue beta copper phthalocyanine NCNF. The AW 300 series is regarded as a non-yellowing acrylic resin that is very resistant with high wetting power. The high level of grinding fineness with the high concentration of pigments makes it possible to attain a very glossy finished product. AW 304 is compatible with acrylic emulsions with applications in industrial and decorative coatings, water-based inks for laminates, water-based wood stains. 收起 | |
| AW 305 | AB Chimica srl | AW 305, in the form of a paste, is pigment dispersion with the dispersion medium of water soluble acrylic resin, and has 44% of pigment type of transparent red iron oxide. The AW 300 series is regarded as a non-yellowing acrylic resin that is very resista...展開 AW 305, in the form of a paste, is pigment dispersion with the dispersion medium of water soluble acrylic resin, and has 44% of pigment type of transparent red iron oxide. The AW 300 series is regarded as a non-yellowing acrylic resin that is very resistant with high wetting power. The high level of grinding fineness with the high concentration of pigments makes it possible to attain a very glossy finished product. AW 305 is compatible with acrylic emulsions with applications in industrial and decorative coatings, water-based inks for laminates, water-based wood stains. 收起 | |
| AW 307 | AB Chimica srl | AW 307, in the form of a paste, is pigment dispersion with the dispersion medium of water soluble acrylic resin, and has 55% of pigment type yellow iron oxide. The AW 300 series is regarded as a non-yellowing acrylic resin that is very resistant with high...展開 AW 307, in the form of a paste, is pigment dispersion with the dispersion medium of water soluble acrylic resin, and has 55% of pigment type yellow iron oxide. The AW 300 series is regarded as a non-yellowing acrylic resin that is very resistant with high wetting power. The high level of grinding fineness with the high concentration of pigments makes it possible to attain a very glossy finished product. AW 307 is compatible with acrylic emulsions with applications in industrial and decorative coatings, water-based inks for laminates, water-based wood stains. 收起 | |
| AW 308 | AB Chimica srl | AW 308, in the form of a paste, is pigment dispersion with the dispersion medium of water soluble acrylic resin, and has 40% of pigment type of azoic red P.R. 112. The AW 300 series is regarded as a non-yellowing acrylic resin that is very resistant with ...展開 AW 308, in the form of a paste, is pigment dispersion with the dispersion medium of water soluble acrylic resin, and has 40% of pigment type of azoic red P.R. 112. The AW 300 series is regarded as a non-yellowing acrylic resin that is very resistant with high wetting power. The high level of grinding fineness with the high concentration of pigments makes it possible to attain a very glossy finished product. AW 308 is compatible with acrylic emulsions with applications in industrial and decorative coatings, water-based inks for laminates, water-based wood stains. 收起 | |
| AW 312 | AB Chimica srl | AW 312, in the form of a paste, is pigment dispersion with the dispersion medium of water soluble acrylic resin, and has 60% of pigment type red iron oxide. The AW 300 series is regarded as a non-yellowing acrylic resin that is very resistant with high we...展開 AW 312, in the form of a paste, is pigment dispersion with the dispersion medium of water soluble acrylic resin, and has 60% of pigment type red iron oxide. The AW 300 series is regarded as a non-yellowing acrylic resin that is very resistant with high wetting power. The high level of grinding fineness with the high concentration of pigments makes it possible to attain a very glossy finished product. AW 312 is compatible with acrylic emulsions with applications in industrial and decorative coatings, water-based inks for laminates, water-based wood stains. 收起 | |
| AW 320 | AB Chimica srl | AW 320, in the form of a paste, is pigment dispersion with the dispersion medium of water soluble acrylic resin, and has 45% of pigment type of arylamide yellow. The AW 300 series is regarded as a non-yellowing acrylic resin that is very resistant with hi...展開 AW 320, in the form of a paste, is pigment dispersion with the dispersion medium of water soluble acrylic resin, and has 45% of pigment type of arylamide yellow. The AW 300 series is regarded as a non-yellowing acrylic resin that is very resistant with high wetting power. The high level of grinding fineness with the high concentration of pigments makes it possible to attain a very glossy finished product. AW 320 is compatible with acrylic emulsions with applications in industrial and decorative coatings, water-based inks for laminates, water-based wood stains. 收起 | |
| AW 321 | AB Chimica srl | AW 321, in the form of a paste, is pigment dispersion with the dispersion medium of water soluble acrylic resin, and has 45% of pigment type of dinitoaniline orange. The AW 300 series is regarded as a non-yellowing acrylic resin that is very resistant wit...展開 AW 321, in the form of a paste, is pigment dispersion with the dispersion medium of water soluble acrylic resin, and has 45% of pigment type of dinitoaniline orange. The AW 300 series is regarded as a non-yellowing acrylic resin that is very resistant with high wetting power. The high level of grinding fineness with the high concentration of pigments makes it possible to attain a very glossy finished product. AW 321 is compatible with acrylic emulsions with applications in industrial and decorative coatings, water-based inks for laminates, water-based wood stains. 收起 | |
| AW 336 | AB Chimica srl | AW 336, in the form of a paste, is pigment dispersion with the dispersion medium of water soluble acrylic resin, and has 40% of pigment type of green chlorinated copper phthalocyanine. The AW 300 series is regarded as a non-yellowing acrylic resin that is...展開 AW 336, in the form of a paste, is pigment dispersion with the dispersion medium of water soluble acrylic resin, and has 40% of pigment type of green chlorinated copper phthalocyanine. The AW 300 series is regarded as a non-yellowing acrylic resin that is very resistant with high wetting power. The high level of grinding fineness with the high concentration of pigments makes it possible to attain a very glossy finished product. AW 336 is compatible with acrylic emulsions with applications in industrial and decorative coatings, water-based inks for laminates, water-based wood stains. 收起 | |
| AW 341 | AB Chimica srl | AW 341, in the form of a paste, is pigment dispersion with the dispersion medium of water soluble acrylic resin, and has 30% of pigment type of dioxazine violet. The AW 300 series is regarded as a non-yellowing acrylic resin that is very resistant with hi...展開 AW 341, in the form of a paste, is pigment dispersion with the dispersion medium of water soluble acrylic resin, and has 30% of pigment type of dioxazine violet. The AW 300 series is regarded as a non-yellowing acrylic resin that is very resistant with high wetting power. The high level of grinding fineness with the high concentration of pigments makes it possible to attain a very glossy finished product. AW 341 is compatible with acrylic emulsions with applications in industrial and decorative coatings, water-based inks for laminates, water-based wood stains. 收起 | |
| AW 344 | AB Chimica srl | AW 344, in the form of a paste, is pigment dispersion with the dispersion medium of water soluble acrylic resin, and has 40% of pigment type transparent yellow iron oxide. The AW 300 series is regarded as a non-yellowing acrylic resin that is very resista...展開 AW 344, in the form of a paste, is pigment dispersion with the dispersion medium of water soluble acrylic resin, and has 40% of pigment type transparent yellow iron oxide. The AW 300 series is regarded as a non-yellowing acrylic resin that is very resistant with high wetting power. The high level of grinding fineness with the high concentration of pigments makes it possible to attain a very glossy finished product. AW 344 is compatible with acrylic emulsions with applications in industrial and decorative coatings, water-based inks for laminates, water-based wood stains. 收起 | |
| AW 390B | AB Chimica srl | AW 390B, in the form of a paste, is pigment dispersion with the dispersion medium of water soluble acrylic resin, and has 25% of pigment type of quinacridone magenta. The AW 300 series is regarded as a non-yellowing acrylic resin that is very resistant wi...展開 AW 390B, in the form of a paste, is pigment dispersion with the dispersion medium of water soluble acrylic resin, and has 25% of pigment type of quinacridone magenta. The AW 300 series is regarded as a non-yellowing acrylic resin that is very resistant with high wetting power. The high level of grinding fineness with the high concentration of pigments makes it possible to attain a very glossy finished product. AW 390B is compatible with acrylic emulsions with applications in industrial and decorative coatings, water-based inks for laminates, water-based wood stains. 收起 | |
| AW 397 | AB Chimica srl | AW 397, in the form of a paste, is pigment dispersion with the dispersion medium of water soluble acrylic resin, and has 35% of pigment type medium jetness black MCF. The AW 300 series is regarded as a non-yellowing acrylic resin that is very resistant wi...展開 AW 397, in the form of a paste, is pigment dispersion with the dispersion medium of water soluble acrylic resin, and has 35% of pigment type medium jetness black MCF. The AW 300 series is regarded as a non-yellowing acrylic resin that is very resistant with high wetting power. The high level of grinding fineness with the high concentration of pigments makes it possible to attain a very glossy finished product. AW 397 is compatible with acrylic emulsions with applications in industrial and decorative coatings, water-based inks for laminates, water-based wood stains. 收起 | |
| Burez® K80 505A E | Lawter | Burez® K80 505A E is a potassium soap with 80% solids and is considered for use primarily in resin pigments for inks. The Burez® range of products is mainly designed for emulsion polymerization, wet glue formulations and organic pigment production. | |
| Cinergi™ 2000 E | Lawter | Cinergi™ 2000 E is a special varnish that is 100% non-volatile and is based on modified vegetable oil blends. The product displays high gloss, low bronzing and good film formation in special inks such as sheet-fed, metal deco and web-fed applications. | |
| Cinergi™ 2100 E | Lawter | Cinergi™ 2100 E is a special varnish that is non-volatile and which is based on rosin resin, vegetable oil and mineral distillates. It shows good leafing, high gloss and oxidation and rub resistance. The product is ideally suited for metallic inks and has...展開 Cinergi™ 2100 E is a special varnish that is non-volatile and which is based on rosin resin, vegetable oil and mineral distillates. It shows good leafing, high gloss and oxidation and rub resistance. The product is ideally suited for metallic inks and has application in offset, sheet-fed, web-fed and letterpress printing techniques. 收起 | |
| Cinergi™ 2239 E | Lawter | Cinergi™ 2239 E is a gel varnish that is fast setting with a high gloss. It has good water as well as heat and shear resistance qualities and finds uses in offset, quickset, sheet-fed and gloss offset inks. | |
| Cinergi™ 4170 E | Lawter | Cinergi™ 4170 E is a special, 100% non-volatile varnish from rosin-based resin, vegetable oil, rosin ester and tung oil. It has a tough, hard film and is rub, scruff, grease, alkali and detergent resistant. The product is used in offset, packaging, sheet-...展開 Cinergi™ 4170 E is a special, 100% non-volatile varnish from rosin-based resin, vegetable oil, rosin ester and tung oil. It has a tough, hard film and is rub, scruff, grease, alkali and detergent resistant. The product is used in offset, packaging, sheet-fed and 100% NV inks as well as in overprint varnishes. 收起 | |
| Cinergi™ 7000 E | Lawter | Cinergi™ 7000 E is a non-volatile gloss varnish based on vegetable oils and rosin-based resin. It shows better resistance to fountain solutions that have alcohol and also displays water resistance to metal deco inks. The product improves transfer due to a...展開 Cinergi™ 7000 E is a non-volatile gloss varnish based on vegetable oils and rosin-based resin. It shows better resistance to fountain solutions that have alcohol and also displays water resistance to metal deco inks. The product improves transfer due to a high tack and displays a high print quality under trying press conditions. It is used in offset, sheet-fed, gloss offset, screen ink and letterpress applications. 收起 | |
| Cinergi™ 7101 E | Lawter | Cinergi™ 7101 E is a gel varnish from rosin-based resins, mineral distillates and alkyd resins that show high gloss, has fast setting and good water balance properties. It is used as a let down varnish or gel in sheet-fed and quickset offset inks and can ...展開 Cinergi™ 7101 E is a gel varnish from rosin-based resins, mineral distillates and alkyd resins that show high gloss, has fast setting and good water balance properties. It is used as a let down varnish or gel in sheet-fed and quickset offset inks and can be combined with pigment wetting varnishes. 收起 | |
| Cinergi™ 7105 E | Lawter | Cinergi™ 7105 E is a gel varnish from rosin-based resins, ester solvents, gelling agents, alkyd resins and vegetable oil. It shows good setting combined with high gloss, has good heat and shear resistance properties and good lithographic behavior. The pro...展開 Cinergi™ 7105 E is a gel varnish from rosin-based resins, ester solvents, gelling agents, alkyd resins and vegetable oil. It shows good setting combined with high gloss, has good heat and shear resistance properties and good lithographic behavior. The product is used as a let down varnish or gel in quickset offset inks or in sheet-fed inks for high speed presses. 收起 | |
| Cinergi™ 7106 E | Lawter | Cinergi™ 7106 E is a gel varnish made up of a rosin-based resins, gelling agents, ester of vegetable oils and mineral distillates. It shows high gloss, is fast setting and has good water balance on fast presses. The product is used as a varnish or gel in ...展開 Cinergi™ 7106 E is a gel varnish made up of a rosin-based resins, gelling agents, ester of vegetable oils and mineral distillates. It shows high gloss, is fast setting and has good water balance on fast presses. The product is used as a varnish or gel in sheet-fed and quickset offset inks. 收起 | |
| Cinergi™ 7107 E | Lawter | Cinergi™ 7107 E is a gel varnish based on modified rosin-based resin, mineral distillates and vegetable oil. It is fast setting, has good water balance and print sharpness. The product shows a medium viscosity together with a low yield value and is used a...展開 Cinergi™ 7107 E is a gel varnish based on modified rosin-based resin, mineral distillates and vegetable oil. It is fast setting, has good water balance and print sharpness. The product shows a medium viscosity together with a low yield value and is used as a varnish or gel in sheet-fed and quickset offset inks. 收起 | |
| Cinergi™ 8000 E | Lawter | Cinergi™ 8000 E is a gloss varnish that is 100% non-volatile and which is based on vegetable oils and rosin-based resins. It displays good rub resistance, is water resistant and fast setting with a high gloss. It has the ability to replace alkyds in inks ...展開 Cinergi™ 8000 E is a gloss varnish that is 100% non-volatile and which is based on vegetable oils and rosin-based resins. It displays good rub resistance, is water resistant and fast setting with a high gloss. It has the ability to replace alkyds in inks and varnishes and is ideally used in offset, sheet-fed, gloss offset and metal deco applications. 收起 | |
| Cinergi™ 8001 E | Lawter | Cinergi™ 8001 E is a non-volatile gloss varnish derived from rosin-based resins and vegetable oils that have the characteristics of being water resistant, are able to replace alkyds in inks and varnishes, and have good rub resistance. The product is also ...展開 Cinergi™ 8001 E is a non-volatile gloss varnish derived from rosin-based resins and vegetable oils that have the characteristics of being water resistant, are able to replace alkyds in inks and varnishes, and have good rub resistance. The product is also fast setting with a high gloss that is ideal for use in sheet-fed, offset and gloss offset applications. 收起 | |
| Decotherm™ 100 E | Lawter | Decotherm™ 100 E is a gel varnish from rosin-based resin, gelling agents, alkyd resin and mineral distillates. It displays high gloss, has fast drying and curing abilities with good adhesion to steel, aluminum and tin. The product is used in inks printed ...展開 Decotherm™ 100 E is a gel varnish from rosin-based resin, gelling agents, alkyd resin and mineral distillates. It displays high gloss, has fast drying and curing abilities with good adhesion to steel, aluminum and tin. The product is used in inks printed on steel, flat tin or aluminum products. 收起 | |
| Decotherm™ 220 E | Lawter | Decotherm™ 220 E is a polyester resin dissolved in Dobanol 23 and tridecylalcohol in metal deco inks for dry offset or spindle printing on a 2-piece decorative can. It shows good adhesion to metals with a high gloss, good printability, transfer and MEK re...展開 Decotherm™ 220 E is a polyester resin dissolved in Dobanol 23 and tridecylalcohol in metal deco inks for dry offset or spindle printing on a 2-piece decorative can. It shows good adhesion to metals with a high gloss, good printability, transfer and MEK resistance. Other applications include uses in white and colored inks. 收起 | |
| Decotherm™ 255 E | Lawter | Decotherm™ 255 E is a blocked catalyst acid that is dissolved in TXIB and is used to catalyze the cure of melamine and polyester resins at higher temperatures. Its has a fast cure speed and is meant for metal deco inks that are printed with spindle printi...展開 Decotherm™ 255 E is a blocked catalyst acid that is dissolved in TXIB and is used to catalyze the cure of melamine and polyester resins at higher temperatures. Its has a fast cure speed and is meant for metal deco inks that are printed with spindle printing or dry offsets for 2-piece decorative cans. Other applications include colored or white inks. 收起 | |
| Decotherm™ 260 E | Lawter | Decotherm™ 260 E is a polyester resin dissolved in tripropylene glycol that has the benefit of high pigment wetting, gloss, flow and transfer on high speed presses. It also has good adhesion to metals which is why it is considered ideal for use in metal d...展開 Decotherm™ 260 E is a polyester resin dissolved in tripropylene glycol that has the benefit of high pigment wetting, gloss, flow and transfer on high speed presses. It also has good adhesion to metals which is why it is considered ideal for use in metal deco inks. Such inks use the spindle printing or dry offset system of printing on 2-piece cans. 收起 | |
| Decotherm™ 290 E | Lawter | Decotherm™ 290 E is a structured polyester resin that has low tack and misting properties, shows good transfer on high speed presses and displays adhesion to metals. It is used in metal deco inks using the spindle printing or dry offset method for 2-piece...展開 Decotherm™ 290 E is a structured polyester resin that has low tack and misting properties, shows good transfer on high speed presses and displays adhesion to metals. It is used in metal deco inks using the spindle printing or dry offset method for 2-piece cans. It shows good color retention and is also used in white and colored ink applications. 收起 | |
| Eco-Rez™ 1621 E | Lawter | Eco-Rez™ 1621 E is a polyol-modified rosin resin that is free of formaldehyde and phenols. It displays a high solubility and low viscosity in mineral distillates. The product is also fast setting, has a low odor, a high gloss and good pigment wetting prop...展開 Eco-Rez™ 1621 E is a polyol-modified rosin resin that is free of formaldehyde and phenols. It displays a high solubility and low viscosity in mineral distillates. The product is also fast setting, has a low odor, a high gloss and good pigment wetting properties. It is used in offset, sheet-fed, grinding varnishes and low odor inks. 收起 | |
| Eco-Rez™ 4237 E | Lawter | Eco-Rez™ 4237 E is a formaldehyde and phenol-free rosin resin that has low solubility combined with high viscosity in mineral distillates. It is fast setting, has a high melt point, low odor and light color making it ideal for use in OPV varnishes and low...展開 Eco-Rez™ 4237 E is a formaldehyde and phenol-free rosin resin that has low solubility combined with high viscosity in mineral distillates. It is fast setting, has a high melt point, low odor and light color making it ideal for use in OPV varnishes and low odor inks. 收起 | |
| Eco-Rez™ 4440 E | Lawter | Eco-Rez™ 4440 E is a rosin resin that is free of phenols and formaldehyde, with a medium to low viscosity and medium solubility in mineral distillates. It has high gloss, is fast setting with good pigment wetting properties. The product can be used in off...展開 Eco-Rez™ 4440 E is a rosin resin that is free of phenols and formaldehyde, with a medium to low viscosity and medium solubility in mineral distillates. It has high gloss, is fast setting with good pigment wetting properties. The product can be used in offset, sheet-fed and low odor inks. 收起 | |
| Eco-Rez™ 9500 E | Lawter | Eco-Rez™ 9500 E is a high soluble and low viscous rosin resin that has good grinding properties, is free of phenols and formaldehyde and displays low yellowing and odor. The product provides the ability to ensure a greener outcome in terms of environmenta...展開 Eco-Rez™ 9500 E is a high soluble and low viscous rosin resin that has good grinding properties, is free of phenols and formaldehyde and displays low yellowing and odor. The product provides the ability to ensure a greener outcome in terms of environmental sustainability. It is used in grinding varnishes, web offsets and low odor inks. 收起 | |
| Eco-Rez™ 9520 E | Lawter | Eco-Rez™ 9520 E is a rosin resin with a medium solubility and medium viscosity in a vegetable oil. It has low tack, low yellowing and odor, is free of phenols and formaldehyde and has good gel and anti-misting properties. The product provides a greener al...展開 Eco-Rez™ 9520 E is a rosin resin with a medium solubility and medium viscosity in a vegetable oil. It has low tack, low yellowing and odor, is free of phenols and formaldehyde and has good gel and anti-misting properties. The product provides a greener alternative and can be used in offsets, let down varnishes and low odor inks. 收起 | |
| Eco-Set™ 4002 E | Lawter | Eco-Set™ 4002 E is a grinding varnish with a phenol-free rosin that provides sustainable options in chemistry formulation. It has good tack stability, low tack inks, is fast setting with good lithographic and anti-misting properties. The product has uses ...展開 Eco-Set™ 4002 E is a grinding varnish with a phenol-free rosin that provides sustainable options in chemistry formulation. It has good tack stability, low tack inks, is fast setting with good lithographic and anti-misting properties. The product has uses in sheet-fed and high speed presses. 收起 | |
| Eco-Set™ 4025 E | Lawter | Eco-Set™ 4025 E is a non-VOC grinding varnish that is free of phenols, offering a renewable source of application in chemistry formulations. It displays good lithographic behavior with good anti-misting properties. It is also fast setting with lower tack ...展開 Eco-Set™ 4025 E is a non-VOC grinding varnish that is free of phenols, offering a renewable source of application in chemistry formulations. It displays good lithographic behavior with good anti-misting properties. It is also fast setting with lower tack inks that are suitable for use in sheet-fed and high speed presses. 收起 | |
| Eco-Set™ 4300 E | Lawter | Eco-Set™ 4300 E is a gel varnish with phenol-free rosins and mineral distillates that show good tack stability, displays ideal lithographic behavior, is fast setting and has good anti-misting qualities. The product has uses in sheet-fed and high speed pre...展開 Eco-Set™ 4300 E is a gel varnish with phenol-free rosins and mineral distillates that show good tack stability, displays ideal lithographic behavior, is fast setting and has good anti-misting qualities. The product has uses in sheet-fed and high speed presses. 收起 | |
| Eco-Set™ 4330 E | Lawter | Eco-Set™ 4330 E is a gel varnish that is 100% non-VOC and is based on phenol-free rosins which provide a sustainable alternative in chemistry formulations. It shows good tack stability, is fast setting with anti-misting properties and has good lithographi...展開 Eco-Set™ 4330 E is a gel varnish that is 100% non-VOC and is based on phenol-free rosins which provide a sustainable alternative in chemistry formulations. It shows good tack stability, is fast setting with anti-misting properties and has good lithographic behavior. The product is used in sheet-fed inks and high speed presses. 收起 | |
| Erkazit™ 3800 E | Lawter | Erkazit™ 3800 E is a highly modified hydrocarbon resin that has a low resin and pigment content while possessing good printing properties. It has medium to high durability and is especially ideal as a let down resin. The product is used in publication gra...展開 Erkazit™ 3800 E is a highly modified hydrocarbon resin that has a low resin and pigment content while possessing good printing properties. It has medium to high durability and is especially ideal as a let down resin. The product is used in publication gravure and let down varnishes. 收起 | |
| Erkazit™ 4000 E | Lawter | Erkazit™ 4000 E is a highly modified hydrocarbon resin with unique low viscosity and medium dilutability characteristics. It is useful as a letdown resin and has applications in publication gravure and let down varnishes. | |
| Erkazit™ 4902 E | Lawter | Erkazit™ 4902 E is a phenolic modified rosin-based resinate that is used as a grinding resin in publication gravure inks. It has good pigment wetting and fast drying properties, with medium viscosity, fast solvent release and good block resistance as adde...展開 Erkazit™ 4902 E is a phenolic modified rosin-based resinate that is used as a grinding resin in publication gravure inks. It has good pigment wetting and fast drying properties, with medium viscosity, fast solvent release and good block resistance as added features. Apart from publication gravure uses, the product can also be used in grinding varnishes. 收起 | |
| Erkazit™ 4905 E | Lawter | Erkazit™ 4905 E is a phenolic modified rosin-based resinate designed for pigment grinding in the manufacture of blue, yellow and red inks. It offers good pigment wetting, fast drying and quick solvent release features in various applications including pub...展開 Erkazit™ 4905 E is a phenolic modified rosin-based resinate designed for pigment grinding in the manufacture of blue, yellow and red inks. It offers good pigment wetting, fast drying and quick solvent release features in various applications including publication gravure and grinding varnishes. 收起 | |
| Erkazit™ 4908 E | Lawter | Erkazit™ 4908 E is a metallized phenolic modified rosin-based resinate that offers good pigment wetting and fast drying behavior while showing good solubility in inks and varnishes. It also has a low viscosity which helps it to be ideally suited for use i...展開 Erkazit™ 4908 E is a metallized phenolic modified rosin-based resinate that offers good pigment wetting and fast drying behavior while showing good solubility in inks and varnishes. It also has a low viscosity which helps it to be ideally suited for use in publication gravure and grinding varnishes. 收起 | |
| Erkazit™ 7861 E | Lawter | Erkazit™ 7861 E is a phenolic modified rosin resin that has a low pigment and resin content, while offering good printing properties. It has high durability and is ideally used in publication gravure and let down varnishes. | |
| Flex-Rez™ 1074 CS C | Lawter | Flex-Rez™ 1074 CS C is a co-solvent soluble polyamide resin that provides good adhesion to treated film like aluminum, nylon, glassine and other aluminum-coated films. It is also a good film former, shows low viscosity, fast solvent release, resistance to...展開 Flex-Rez™ 1074 CS C is a co-solvent soluble polyamide resin that provides good adhesion to treated film like aluminum, nylon, glassine and other aluminum-coated films. It is also a good film former, shows low viscosity, fast solvent release, resistance to oils, alkalis, grease and water and is compatible with high acid-value rosins, phenolic and other rosin offshoots. Flex-Rez™ 1074 CS C is suitable for use in flexographic and gravure inks, heat and seal coatings, cold seal release lacquers and in overprint varnishes. 收起 | |
| Flex-Rez™ 1084 AS C | Lawter | Flex-Rez™ 1084 AS C is an alcohol soluble polyamide resin with a high melt point, offering high heat resistance as well as good gel resistance and improved resistance to grease, rub and scratch. It also promotes film hardness, offers a fast solvent releas...展開 Flex-Rez™ 1084 AS C is an alcohol soluble polyamide resin with a high melt point, offering high heat resistance as well as good gel resistance and improved resistance to grease, rub and scratch. It also promotes film hardness, offers a fast solvent release and offers great potential in the creation of high performance inks for various synthetic polymer substrates. The product is used in flexographic and gravure inks and overprint varnishes. 收起 | |
| Flex-Rez™ 1094 CS C | Lawter | Flex-Rez™ 1094 CS C is a co-solvent soluble polyamide resin that provides gel resistance and good adhesion to treated film. It is compatible with high-acid value rosin, rosin-derived resins and also finds itself providing good adhesion, chemical resistanc...展開 Flex-Rez™ 1094 CS C is a co-solvent soluble polyamide resin that provides gel resistance and good adhesion to treated film. It is compatible with high-acid value rosin, rosin-derived resins and also finds itself providing good adhesion, chemical resistance and high gloss. The product is used in flexographic and gravure inks and overprint varnishes. 收起 | |
| Flex-Rez™ 1155 AS C | Lawter | Flex-Rez™ 1155 AS C is an alcohol soluble polyamide resin that offers good pigment wetting and low viscosity in a product that is considered the most versatile of the Flex-Rez™ resin series. It has good adhesion as well as oil, lard, grease, water and alk...展開 Flex-Rez™ 1155 AS C is an alcohol soluble polyamide resin that offers good pigment wetting and low viscosity in a product that is considered the most versatile of the Flex-Rez™ resin series. It has good adhesion as well as oil, lard, grease, water and alkali resistance. The product also offers high gloss and compatibility with other resins making it an effective polyamide for pigment grinding. It also offers good gel resistance and shows good tolerance for ester solvents. It has uses in cold seal release lacquers, flexographic and gravure inks and overprint varnishes. 收起 | |
| Flex-Rez™ 2433 AD C | Lawter | Flex-Rez™ 2433 AD C is an alcohol-dilutable polyamide resin that has good adhesion and gloss with wet-pack resistance and a low odor as key features. The product has served as an industry standard for surface printing work on paper and film. It is used in...展開 Flex-Rez™ 2433 AD C is an alcohol-dilutable polyamide resin that has good adhesion and gloss with wet-pack resistance and a low odor as key features. The product has served as an industry standard for surface printing work on paper and film. It is used in overprint varnishes and gravure and flexographic inks. 收起 | |
| Flex-Rez™ 3370 CS C | Lawter | Flex-Rez™ 3370 CS C is a co-solvent polyamide resin that provides good adhesion and gel resistant properties to various treated films. It also shows better nitrocellulose compatibility than other co-solvent resins. The product can be used in overprint var...展開 Flex-Rez™ 3370 CS C is a co-solvent polyamide resin that provides good adhesion and gel resistant properties to various treated films. It also shows better nitrocellulose compatibility than other co-solvent resins. The product can be used in overprint varnishes and in gravure and flexographic inks. 收起 | |
| Flex-Rez™ 5111 AD C | Lawter | Flex-Rez™ 5111 AD C is an alcohol-dilutable polyamide resin that has good adhesion and shows ice water wrinkle resistance. Its other benefits include high gloss and pigment wetting abilities, block resistance and flexibility. The product is used in gravur...展開 Flex-Rez™ 5111 AD C is an alcohol-dilutable polyamide resin that has good adhesion and shows ice water wrinkle resistance. Its other benefits include high gloss and pigment wetting abilities, block resistance and flexibility. The product is used in gravure and flexographic inks and overprint varnishes. 收起 | |
| Flexonic™ EN41 E | Lawter | Flexonic™ EN41 E is a polyethylene emulsion that displays scratch, rub, slip and block resistant properties. It is used as an additive in water-based coatings, inks and overprint varnishes and has good compatibility with styrene acrylics and acrylics. The...展開 Flexonic™ EN41 E is a polyethylene emulsion that displays scratch, rub, slip and block resistant properties. It is used as an additive in water-based coatings, inks and overprint varnishes and has good compatibility with styrene acrylics and acrylics. The product is used in aqueous inks and coatings. 收起 | |
| Flexonic™ W378 E | Lawter | Flexonic™ W378 E is a polyethylene emulsion that is APE-free and exhibits scratch, rub, slip and block resistant properties. It has minimal effect on gloss, while showing good compatibility with styrene acrylics and acrylics. The product is used in aqueou...展開 Flexonic™ W378 E is a polyethylene emulsion that is APE-free and exhibits scratch, rub, slip and block resistant properties. It has minimal effect on gloss, while showing good compatibility with styrene acrylics and acrylics. The product is used in aqueous inks and coatings. 收起 | |
| Fluoron™ 4800 E | Lawter | Fluoron™ 4800 E is a non-volatile PTFE wax dispersion that displays good drying and setting performance, has good slip and high gloss features, is easily dispersible and has rub, abrasion and scratch resistance properties. It is used in sheet-fed and heat...展開 Fluoron™ 4800 E is a non-volatile PTFE wax dispersion that displays good drying and setting performance, has good slip and high gloss features, is easily dispersible and has rub, abrasion and scratch resistance properties. It is used in sheet-fed and heatset inks, offset inks and overprint varnishes. 收起 | |
| Hydro-Rez™ 3013 E | Lawter | Hydro-Rez™ 3013 E is an acrylic resin in a water solution that displays good pigment wetting with effective wet rub and dry rub resistance. It has broad compatibility with other resins and is suitable for use in gravure and flexographic inks and paper coa...展開 Hydro-Rez™ 3013 E is an acrylic resin in a water solution that displays good pigment wetting with effective wet rub and dry rub resistance. It has broad compatibility with other resins and is suitable for use in gravure and flexographic inks and paper coatings. 收起 | |
| Hydro-Rez™ 5614 A | Lawter | Hydro-Rez™ 5614 A is a fumarated modified rosin ester that can be dispersed in water with amines, ammonia or morpholine and is also soluble in alcohol. It displays fast water release in aqueous inks, exhibits good flexibility and low viscosity and its hig...展開 Hydro-Rez™ 5614 A is a fumarated modified rosin ester that can be dispersed in water with amines, ammonia or morpholine and is also soluble in alcohol. It displays fast water release in aqueous inks, exhibits good flexibility and low viscosity and its high melting point ensures good leveling and fast solvent release. The product is particularly recommended for use in flexographic inks, while also finding uses in gravure, carton and specialty inks and spirit varnishes. 收起 | |
| Hydro-Rez™ 5626 A | Lawter | Hydro-Rez™ 5626 A is a fumarated rosin ester that can be dispersed in water with morpholine, ammonia or amines and shows solubility in alcohol. A high melting point provides good leveling and fast solvent release and shows compatibility with manila resins...展開 Hydro-Rez™ 5626 A is a fumarated rosin ester that can be dispersed in water with morpholine, ammonia or amines and shows solubility in alcohol. A high melting point provides good leveling and fast solvent release and shows compatibility with manila resins, shellac and most acrylic resins and dispersions. It offers high gloss, a high softening point, flexibility and good color and odor. The product is used in gravure and flexographic inks, overprint varnishes, specialty varnishes, spirit varnishes and carton inks. 收起 | |
| Hydro-Rez™ 6500 A | Lawter | Hydro-Rez™ 6500 A is a fumaric modified rosin ester, soluble in alcohol and can be dispersed in water with amines, ammonia and morpholine. It exhibits gloss and pigment wetting in aqueous inks, while also showing a fast water release in aqueous inks. The ...展開 Hydro-Rez™ 6500 A is a fumaric modified rosin ester, soluble in alcohol and can be dispersed in water with amines, ammonia and morpholine. It exhibits gloss and pigment wetting in aqueous inks, while also showing a fast water release in aqueous inks. The product shows good adhesion on aluminum foil, can be diluted in water while a low viscosity, high rub resistance and good flexibility display its other benefits. It can be used in carton and specialty inks and in gravure and flexographic inks. 收起 | |
| Hydro-Rez™ 655 E | Lawter | Hydro-Rez™ 655 E is a water-based acrylic dispersal agent that has been especially developed for water-based inks. It has good heat seal resistance and is used in gravure and flexographic inks and in heat seal lacquers. | |
| Hydro-Rez™ 800 E | Lawter | Hydro-Rez™ 800 E is a water-based acrylic, especially created for water-based inks. It displays good adhesion on non-absorbing substrates with applications in gravure and flexographic inks, overprint varnishes and coatings and in film and foil. | |
| Luminex™ 70 A | Lawter | Luminex™ 70 A is a heatset gel vehicle that displays good solubility, gloss, transfer and lithographic performance. It also has good water balance, solvent release and a sharp dot structure. The product is suitable for use in heatset offset prints. | |
| Miradull™ E | Lawter | Miradull™ E is an overprint varnish from rosin-based resins, matting agents, alkyd resins, driers, waxes and mineral distillates. It has high rub and "polish" resistance, with a high amount of matting. It is fast drying and setting with low yellowing pro...展開 Miradull™ E is an overprint varnish from rosin-based resins, matting agents, alkyd resins, driers, waxes and mineral distillates. It has high rub and "polish" resistance, with a high amount of matting. It is fast drying and setting with low yellowing properties. The product is used in offset inks, sheet-fed and heatset inks. 收起 | |
| Miraglaze™ 1810 Base E | Lawter | Miraglaze™ 1810 Base E is an overprint varnish base from rosin-based resins and mineral distillates that have no driers or waxes. It has a high gloss, is fast drying and fast setting with good rub resistance. There is little yellowing, while leveling and ...展開 Miraglaze™ 1810 Base E is an overprint varnish base from rosin-based resins and mineral distillates that have no driers or waxes. It has a high gloss, is fast drying and fast setting with good rub resistance. There is little yellowing, while leveling and tack stability are good. The product has applications in offset inks and overprint varnishes. 收起 | |
| Miraglaze™ 3100 E | Lawter | Miraglaze™ 3100 E is a satin overprint varnish from rosin-based resins, soya beans, tung oils and mineral distillates. It also contains matting agents, waxes and driers and has the benefit of a fast setting with a satin finish. It also possesses rheologic...展開 Miraglaze™ 3100 E is a satin overprint varnish from rosin-based resins, soya beans, tung oils and mineral distillates. It also contains matting agents, waxes and driers and has the benefit of a fast setting with a satin finish. It also possesses rheological and tack stability with good hardness and rub resistance properties. The product has application as a satin overprint varnish and uses in offset printing inks. 收起 | |
| Miraglaze™ 8834 Base E | Lawter | Miraglaze™ 8834 Base E is an overprint varnish from rosin-based resins, mineral distillates and tung oil. It contains wax, but not driers and has the benefit of a high gloss with fast drying and setting behavior. It also has good tack stability and rub re...展開 Miraglaze™ 8834 Base E is an overprint varnish from rosin-based resins, mineral distillates and tung oil. It contains wax, but not driers and has the benefit of a high gloss with fast drying and setting behavior. It also has good tack stability and rub resistance and is used in offset inks and can be applied in wet-on-wet and wet-on-dry techniques. 收起 | |
| Miraglaze™ 8909 Base E | Lawter | Miraglaze™ 8909 Base E is an overprint varnish base from rosin resins, tung oil, DCO, mineral distillates and gelling agents with the addition of wax, but not driers. It has a high gloss, is fast drying and setting with good tack stability and leveling. T...展開 Miraglaze™ 8909 Base E is an overprint varnish base from rosin resins, tung oil, DCO, mineral distillates and gelling agents with the addition of wax, but not driers. It has a high gloss, is fast drying and setting with good tack stability and leveling. The product is common in overset inks and can be used as a wet-on-wet or wet-on-dry application. 收起 | |
| Optilith™ 1181 E | Lawter | Optilith™ 1181 E is a low viscosity antioxidant additive from antioxidants (BHT), mineral distillates and vegetable oil. It maximizes the stay-open period in web-fed and sheet-fed inks with minimal effect on drying time. The product is also used in heatse...展開 Optilith™ 1181 E is a low viscosity antioxidant additive from antioxidants (BHT), mineral distillates and vegetable oil. It maximizes the stay-open period in web-fed and sheet-fed inks with minimal effect on drying time. The product is also used in heatset and quickset applications. 收起 | |
| Optilith™ 3 E | Lawter | Optilith™ 3 E is a water-balance regulator composed of non-volatile resins, special ingredients and mineral distillates. The product controls water balance, has low viscosity and has minimal impact on rheology and tack. It reduces water pick-up in lithogr...展開 Optilith™ 3 E is a water-balance regulator composed of non-volatile resins, special ingredients and mineral distillates. The product controls water balance, has low viscosity and has minimal impact on rheology and tack. It reduces water pick-up in lithographic inks and has application in offset, heatset and sheet-fed inks. 收起 | |
| Optilith™ XJ12 E | Lawter | Optilith™ XJ12 E is an anti-setoff compound that reduces setoff in litho inks, reduces the need for anti-offset spraying and can be integrated into inks. It is used in offset, quickset, sheet-fed and web-fed applications. | |
| Polyslip™ FA 06 E | Lawter | Polyslip™ FA 06 E is a solvent-based wax dispersion that functions as an additive in water and solvent-based inks, overprint varnishes and coatings where scratch, rub and block resistance are required as is improved slip. It also has applications in solve...展開 Polyslip™ FA 06 E is a solvent-based wax dispersion that functions as an additive in water and solvent-based inks, overprint varnishes and coatings where scratch, rub and block resistance are required as is improved slip. It also has applications in solvent borne and aqueous inks and coatings. 收起 | |
| Polyslip™ FA 09 E | Lawter | Polyslip™ FA 09 E is a solvent-based wax dispersion that has a stabilizing agent to reduce dephasing in storage. It is used as an additive to provide slip, scratch, block and rub resistance in water and solvent-based coatings, inks and overprint varnishes...展開 Polyslip™ FA 09 E is a solvent-based wax dispersion that has a stabilizing agent to reduce dephasing in storage. It is used as an additive to provide slip, scratch, block and rub resistance in water and solvent-based coatings, inks and overprint varnishes. The product is used in packaging and gravure inks and in solvent borne and aqueous inks and coatings. 收起 | |
| Polyslip™ VM 55 E | Lawter | Polyslip™ VM 55 E is a solvent-based wax dispersion consisting of a mix of n-butylacetate and xylene that offers good stability in metallic base coats that are subsequently varnished. It is primarily used in metallized base coats. | |
| Polyslip™ VM 70 E | Lawter | Polyslip™ VM 70 E is a solvent-based wax dispersion consisting of a combination of carnauba wax in solvent "150" and isopropanol. It has good slip, scratch resistance and leveling properties and does not lose gloss. The product is used as a lubricant in v...展開 Polyslip™ VM 70 E is a solvent-based wax dispersion consisting of a combination of carnauba wax in solvent "150" and isopropanol. It has good slip, scratch resistance and leveling properties and does not lose gloss. The product is used as a lubricant in various applications including 2-piece whites and clear coats, solvent borne coatings, lacquers and varnishes. 收起 | |
| Polyslip™ VS 86 E | Lawter | Polyslip™ VS 86 E is a solvent-based wax dispersion consisting of a combination of solvents like pine oil, solvent "150", methoxypropanol and n-butanol. It is used as a lubricant, offering good slip and scratch resistance with gloss retention and leveling...展開 Polyslip™ VS 86 E is a solvent-based wax dispersion consisting of a combination of solvents like pine oil, solvent "150", methoxypropanol and n-butanol. It is used as a lubricant, offering good slip and scratch resistance with gloss retention and leveling as added features. The product is used in solvent borne can coatings, internal lacquers, 2-piece white and clear coats and finishing varnishes. 收起 | |
| Polysperse™ E | Lawter | Polysperse™ E is a micronized synthetic wax that has good rub and scuff resistance properties along with ideal surface slip, gloss and low surface tension. It is used in all printing inks including gravure, offset, screen inks and coatings and varnishes. ...展開 Polysperse™ E is a micronized synthetic wax that has good rub and scuff resistance properties along with ideal surface slip, gloss and low surface tension. It is used in all printing inks including gravure, offset, screen inks and coatings and varnishes. The product also has uses in sheet-fed, heatset and offset inks. 收起 | |
| Reactol™ 1717 E | Lawter | Reactol™ 1717 E is a pale-colored polyketone resin which is soluble in most solvent combitions like acetates, caster oil, ketones and plasticizers. It has good compatibility with most resins like chlorinated rubber, alkyds, melamines and polyamide resins....展開 Reactol™ 1717 E is a pale-colored polyketone resin which is soluble in most solvent combitions like acetates, caster oil, ketones and plasticizers. It has good compatibility with most resins like chlorinated rubber, alkyds, melamines and polyamide resins. With a high degree of polarity, it also helps to improve pigment wetting, adhesion and gloss. The product has uses in flexographic and rotogravure inks, cellulose lacquers, laminating inks, vinyl sealers and coatings and adhesives. 收起 | |
| Reactol™ 1717 H C | Lawter | Reactol™ 1717 H C is a pale ketone and aldehyde resin with an alcohol solubility that displays broad solubility in most solvents including acetates, caster oils, ketones and plasticizers. It also has good compatibility with most resins like rubber, alkyds...展開 Reactol™ 1717 H C is a pale ketone and aldehyde resin with an alcohol solubility that displays broad solubility in most solvents including acetates, caster oils, ketones and plasticizers. It also has good compatibility with most resins like rubber, alkyds, melamines, chlorinated rubber and polyamide resins. The product is used in rotogravure and flexographic inks, laminating inks, primer coatings, cellulose lacquers and adhesives. 收起 | |
| Reactol™ 5145 A | Lawter | Reactol™ 5145 A is an alcohol soluble polyester resin that offers high gloss and solvent release properties. It also exhibits a low viscosity while maintaining good adhesion and flexibility. The product is highly compatible with nitrocellulose and can be ...展開 Reactol™ 5145 A is an alcohol soluble polyester resin that offers high gloss and solvent release properties. It also exhibits a low viscosity while maintaining good adhesion and flexibility. The product is highly compatible with nitrocellulose and can be an adhesion promoter in hard resin systems. It is used in flexo and gravure alcohol-based inks and in aqueous inks, overprint varnishes and coatings. 收起 | |
| Setalin™ V 401 E | Lawter | Setalin™ V 401 E is an alkyd resin with a linseed oil base that displays good pigment wetting properties and good flow. It also has a high gloss and high water pick-up that makes it suitable for use in various applications like letterpress, offset and flo...展開 Setalin™ V 401 E is an alkyd resin with a linseed oil base that displays good pigment wetting properties and good flow. It also has a high gloss and high water pick-up that makes it suitable for use in various applications like letterpress, offset and flow additives. 收起 | |
| Setalin™ V 402 E | Lawter | Setalin™ V 402 E is a soybean oil-based alkyd resin that displays good water balance and pigment wetting properties making it suitable for use in web offset inks. It is fast setting, has a high gloss and its low odor and yellowing make it ideal for use in...展開 Setalin™ V 402 E is a soybean oil-based alkyd resin that displays good water balance and pigment wetting properties making it suitable for use in web offset inks. It is fast setting, has a high gloss and its low odor and yellowing make it ideal for use in sheet-fed, low odor inks and offset inks. 收起 | |
| Setalin™ V 405 E | Lawter | Setalin™ V 405 E is an alkyd resin with a linseed oil base that has good pigment wetting and flow properties. The product displays a high gloss, low odor and low yellowing and is considered ideal for use in three-piece can metal decorating inks, offset, s...展開 Setalin™ V 405 E is an alkyd resin with a linseed oil base that has good pigment wetting and flow properties. The product displays a high gloss, low odor and low yellowing and is considered ideal for use in three-piece can metal decorating inks, offset, sheet-fed and low odor ink applications. 收起 | |
| Setalin™ V 407 E | Lawter | Setalin™ V 407 E is an alkyd resin with a sunflower oil base that has non-yellowing properties. The benefit of a non-yellowing property is that it makes the resin ideal for white and low odor inks as well as non-yellowing inks. The product can also be use...展開 Setalin™ V 407 E is an alkyd resin with a sunflower oil base that has non-yellowing properties. The benefit of a non-yellowing property is that it makes the resin ideal for white and low odor inks as well as non-yellowing inks. The product can also be used in 3-piece can metal decorating inks, offsets and over print varnishes. 收起 | |
| Setalin™ V 418 E | Lawter | Setalin™ V 418 E is an alkyd resin with a coconut oil base that has uses in low odor and cobalt-free inks, white inks and overprint varnishes. It is non-yellowing, has good pigment wetting properties, with a high gloss and good flow. It has applications i...展開 Setalin™ V 418 E is an alkyd resin with a coconut oil base that has uses in low odor and cobalt-free inks, white inks and overprint varnishes. It is non-yellowing, has good pigment wetting properties, with a high gloss and good flow. It has applications in offsets, low odor inks and metal deco inks. 收起 | |
| Setalin™ V 422 E | Lawter | Setalin™ V 422 E is a coconut-based alkyd resin that is tin free and ideal for use in low odor and cobalt-free inks, in white inks as well as overprint varnishes. It is non-yellowing, has good pigment wetting and high gloss and flow properties. The produc...展開 Setalin™ V 422 E is a coconut-based alkyd resin that is tin free and ideal for use in low odor and cobalt-free inks, in white inks as well as overprint varnishes. It is non-yellowing, has good pigment wetting and high gloss and flow properties. The product can also be used in offset and sheet-fed applications. 收起 | |
| Setalin™ V 438 E | Lawter | Setalin™ V 438 E is a linseed oil-based low viscosity alkyd resin that has high gloss and good pigment wetting properties. It is fast setting, has good drying and flow benefits and is ideally used in offset, wetting varnishes and sheet-fed applications. | |
| Setalin™ V 456 E | Lawter | Setalin™ V 456 E is an alkyd resin with a linseed oil base that has a high viscosity, low tack and is a fast setting resin. It also has good pigment wetting properties and a high gloss. Other benefits include low bronzing and a reduced water sensitivity b...展開 Setalin™ V 456 E is an alkyd resin with a linseed oil base that has a high viscosity, low tack and is a fast setting resin. It also has good pigment wetting properties and a high gloss. Other benefits include low bronzing and a reduced water sensitivity behavior. The product is suitable for use in offset, sheet-fed, letterpress and screen ink applications. 收起 | |
| Setalin™ V 457 E | Lawter | Setalin™ V 457 E is a tin-free alkyd resin with a linseed oil base that has a high viscosity resulting in low tack and fast setting benefits. It also displays good pigment wetting, low bronzing and reduced water sensitivity behavior. The product is used i...展開 Setalin™ V 457 E is a tin-free alkyd resin with a linseed oil base that has a high viscosity resulting in low tack and fast setting benefits. It also displays good pigment wetting, low bronzing and reduced water sensitivity behavior. The product is used in offset, letterpress, screen ink and sheet-fed applications. 收起 | |
| Setaprint™ 1200 E | Lawter | Setaprint™ 1200 E is a phenolic modified rosin resin with highly soluble and medium to high viscous characteristics. The product's key features include a high gloss, fast setting ability and good press stability. It also displays good water balance with l...展開 Setaprint™ 1200 E is a phenolic modified rosin resin with highly soluble and medium to high viscous characteristics. The product's key features include a high gloss, fast setting ability and good press stability. It also displays good water balance with low misting and tack as added benefits. Common applications include uses in offset inks, letterpress and sheet-fed inks. 收起 | |
| Setaprint™ 2376 E | Lawter | Setaprint™ 2376 E is a high soluble, medium to low viscous resin that maintains good pigment wetting properties with a high gloss. The product combines expertly with lower soluble resins to increase set speed. It is used in varnishes, aromatic free inks, ...展開 Setaprint™ 2376 E is a high soluble, medium to low viscous resin that maintains good pigment wetting properties with a high gloss. The product combines expertly with lower soluble resins to increase set speed. It is used in varnishes, aromatic free inks, offsets and letterpress applications. 收起 | |
| Setaprint™ 2404 E | Lawter | Setaprint™ 2404 E is a high soluble, medium to low viscosity resin that has good pigment wetting features and maintains a high gloss. The product has good flow and gelling properties with a low misting behavior. It combines well with lower soluble resins ...展開 Setaprint™ 2404 E is a high soluble, medium to low viscosity resin that has good pigment wetting features and maintains a high gloss. The product has good flow and gelling properties with a low misting behavior. It combines well with lower soluble resins to increase set speed and is used in aromatic free inks, varnishes and over print varnishes. 收起 | |
| Setaprint™ 2867 E | Lawter | Setaprint™ 2867 E is a visco-elastic rosin-based resin with medium to low solubility and medium to high viscosity. Its low polarity ensures that inks have good water balance, gloss and are fast setting. The product has good gelling features and is used in...展開 Setaprint™ 2867 E is a visco-elastic rosin-based resin with medium to low solubility and medium to high viscosity. Its low polarity ensures that inks have good water balance, gloss and are fast setting. The product has good gelling features and is used in applications like offset, gel varnishes and letterpress. 收起 | |
| Setaprint™ 3450 E | Lawter | Setaprint™ 3450 E is a general purpose resin with a medium to high solubility that combines high gloss with fast setting features. It displays good pigment grind, flow and water balance with low misting. It is used in offsets, grinding, let down varnishes...展開 Setaprint™ 3450 E is a general purpose resin with a medium to high solubility that combines high gloss with fast setting features. It displays good pigment grind, flow and water balance with low misting. It is used in offsets, grinding, let down varnishes and gloss offset inks. 收起 | |
| Setaprint™ 5000 E | Lawter | Setaprint™ 5000 E is a high-structured rosin ester that shows medium solubility with medium to high viscosity. Its high molecular weight ensures the product is ideal for use in combination with other resins, providing formulation freedom. It has fast sett...展開 Setaprint™ 5000 E is a high-structured rosin ester that shows medium solubility with medium to high viscosity. Its high molecular weight ensures the product is ideal for use in combination with other resins, providing formulation freedom. It has fast setting and low misting properties, with a high gloss and good water balance as added features. 收起 | |
| Setaprint™ 5800 E | Lawter | Setaprint™ 5800 E is a visco-elastic rosin-based resin which shows low solubility and high viscosity. It is good for high speed presses, displaying good press stability and a high gloss. The product also shows good water balance with low misting. It is su...展開 Setaprint™ 5800 E is a visco-elastic rosin-based resin which shows low solubility and high viscosity. It is good for high speed presses, displaying good press stability and a high gloss. The product also shows good water balance with low misting. It is suitable for use in inks based on ester solvents. 收起 | |
| Setaprint™ 7050 E | Lawter | Setaprint™ 7050 E is a high-structured visco-elastic resin which displays low solubility in mineral distillates and limited compatibility with vegetable oils. It is a fast setting and fast solvent release product that has good water balance and rub resist...展開 Setaprint™ 7050 E is a high-structured visco-elastic resin which displays low solubility in mineral distillates and limited compatibility with vegetable oils. It is a fast setting and fast solvent release product that has good water balance and rub resistance as well as a low tack and high gloss. The product is suitable for use in sheet-fed and web-fed offset inks. 收起 |
