| A 154 | BIP (Oldbury) Ltd | A 154 is a modified dicyandiamide formaldehyde precondensate. It is a clear colourless cationic solution. It is primarily used to improve wet fastness of direct dyes. | |
| A 174 | BIP (Oldbury) Ltd | A 174 is a non re-wetting emulsifier. It is designed for use with water repellants and fluorochemical finishes. It an also be used as a foaming agent for use in foam finishing systems. | |
| A 199 | BIP (Oldbury) Ltd | A 199 is a permanent repellant for all fibre types. | |
| AC 108 | BIP (Oldbury) Ltd | AC 108 is a modified ammonium chloride catalyst. It is a neutral clear liquid solution with low reactivity. Primarily used as a catalyst for urea and melamine resins. | |
| AC 119 | BIP (Oldbury) Ltd | AC 119 is a modified magnesium chloride catalyst. In a highly reactivity, low PH clear solution. It has applications where high production speeds required. | |
| AC 178 | BIP (Oldbury) Ltd | AC 178 is a magnesium chloride catalyst. It has medium reactivity and is a clear solution. It is mainly used in medium cure catalyst having minimum effect on shade. | |
| AC 600 | BIP (Oldbury) Ltd | AC 600 is an amine salt of p-toluene sulphonic acid in isopropanol. It is a highly reactive, clear solution. Primarily recommended for use in curing HMMM resin PT 370. | |
| BEETLE® PT312 - Cross Linker in Paper Coatings | BIP (Oldbury) Ltd | PT312 is a methylated melamine formaldehyde resin specifically formulated to give low free formaldehyde when compared with other, more conventional melamine formaldehyde resins. PT312 is used in pigmented paper coatings to cross-link and insolubilise wate...展開 PT312 is a methylated melamine formaldehyde resin specifically formulated to give low free formaldehyde when compared with other, more conventional melamine formaldehyde resins. PT312 is used in pigmented paper coatings to cross-link and insolubilise water soluble binders and co-binders such as starch, CMC etc., thereby improving both wet and dry print properties of the final coated paper. PT312 will also increase the efficiency of the OBA used, particularly in all latex formulations. 收起 | |
| BEETLE® PT336 - Cross Linker in Paper Coatings | BIP (Oldbury) Ltd | PT336 is a methylated melamine formaldehyde resin which is highly reactive and used to cross-link starch, protein and synthetic polymer binder systems. PT336 is used in pigmented paper coatings to cross-link and absorb water soluble binders and co-binders...展開 PT336 is a methylated melamine formaldehyde resin which is highly reactive and used to cross-link starch, protein and synthetic polymer binder systems. PT336 is used in pigmented paper coatings to cross-link and absorb water soluble binders and co-binders such as starch, CMC etc., thereby improving both wet and dry print properties of the final coated paper. PT336 will also increase the efficiency of the OBA used, particularly in all latex formulations. 收起 | |
| BEETLE® PT355 - Wet Strength Resin | BIP (Oldbury) Ltd | PT355 is a chlorine-free, zero AOX, highly reactive and efficient methylated melamine formaldehyde resin. PT355 colloid is used to impart wet strength to a wide variety of paper and paperboard products from heavy duty towels and wipes to wallpapers, envel...展開 PT355 is a chlorine-free, zero AOX, highly reactive and efficient methylated melamine formaldehyde resin. PT355 colloid is used to impart wet strength to a wide variety of paper and paperboard products from heavy duty towels and wipes to wallpapers, envelopes, sack-krafts, laundry tags, tea-bag tissue, and label papers. When used under optimum conditions of pH (4.5 - 6.5) and heat input, the resin will also improve basic sheet dry strength. An added benefit is that PT355 colloid will enhance the performance of rosin sizing agents. 收起 | |
| BEETLE® PT746 - Neutral Cure Wet Strength Resin | BIP (Oldbury) Ltd | PT746 is a cationic, low AOX/DCP polyamide epichlorohydrin resin. Though specifically designed for the production of wet strengthened papers by wet-end application to the paper machine, the special characteristics of BEETLE resin PT746 yields a versatile,...展開 PT746 is a cationic, low AOX/DCP polyamide epichlorohydrin resin. Though specifically designed for the production of wet strengthened papers by wet-end application to the paper machine, the special characteristics of BEETLE resin PT746 yields a versatile, multifunctional product, useful in other applications and areas of the paper-making process. PT746 is used to impart wet strength in the production of a wide variety of papers based upon all cellulosic or all synthetic furnishes, or blends of both fibre types, when used under neutral to alkaline conditions. Higher dry strength often results from the use of PT746, particularly where high or all synthetic fibre furnishes are involved. 收起 | |
| BEETLE® PT789 - Wet Strength Resin | BIP (Oldbury) Ltd | PT789 is a chlorine free, ready for use, cationic melamine formaldehyde colloid in aqueous solution. PT789 is used to impart wet strength to a wide variety of paper and paperboard products from heavy duty towels and wipes to wallpapers, envelopes and sack...展開 PT789 is a chlorine free, ready for use, cationic melamine formaldehyde colloid in aqueous solution. PT789 is used to impart wet strength to a wide variety of paper and paperboard products from heavy duty towels and wipes to wallpapers, envelopes and sack-krafts, when such products are made at pH levels below neutral. Since PT789 is a melamine resin, it is particularly suited to the production of higher quality, more demanding paper products such as hot-filters, laundry-tag, currency, security and bottle label papers. 收起 | |
| MK-Hydrocolor Fanal Violet 27 | mk chemicals | MK-Hydrocolor Fanal Violet 27 is a purple colored pigment. It has a pH value of 7.0 to 9.0, a pigment content of 25% ± 1%, and a water value of 62% ± 1%. This product has good flocculation resistance and printing properties, and is used in pigment printin...展開 MK-Hydrocolor Fanal Violet 27 is a purple colored pigment. It has a pH value of 7.0 to 9.0, a pigment content of 25% ± 1%, and a water value of 62% ± 1%. This product has good flocculation resistance and printing properties, and is used in pigment printing preparations for water based flexo and gravure printings inks. 收起 | |
| MK-Hydroflex Black P. Bk. 7 | mk chemicals | MK-Hydroflex Black P. Bk. 7 is a carbon black colored pigment. It has a pH value of 7.0 to 9.0, a pigment content of 32% ± 1%, and a water value of 54% ± 1%. This product has good flocculation resistance and printing properties, and is used in pigment pri...展開 MK-Hydroflex Black P. Bk. 7 is a carbon black colored pigment. It has a pH value of 7.0 to 9.0, a pigment content of 32% ± 1%, and a water value of 54% ± 1%. This product has good flocculation resistance and printing properties, and is used in pigment printing preparations for water based flexo and gravure printings inks. 收起 | |
| MK-Hydroflex Blue P. B. 15:3, VPA 948/8 | mk chemicals | MK-Hydroflex Blue P. B. 15:3, VPA 948/8 is a blue colored pasty to liquid pigment. It has a pH value of 8.0 to 10.0, a pigment content of 45% ± 1%, and a water value of 42% ± 1%. This product has good flocculation resistance and printing properties, and i...展開 MK-Hydroflex Blue P. B. 15:3, VPA 948/8 is a blue colored pasty to liquid pigment. It has a pH value of 8.0 to 10.0, a pigment content of 45% ± 1%, and a water value of 42% ± 1%. This product has good flocculation resistance and printing properties, and is used in pigment printing preparations for water based flexo and gravure printings inks. 收起 | |
| MK-Hydroflex Blue P. B. 16, VPA 477/6 | mk chemicals | MK-Hydroflex Blue P. B. 16, VPA 477/6 is a blue colored pigment. It has a pH value of 8.5 to 9.5, a pigment content of 35% ± 1%, and a water value of 57% ± 1%. This product has good flocculation resistance and printing properties, and is used in pigment p...展開 MK-Hydroflex Blue P. B. 16, VPA 477/6 is a blue colored pigment. It has a pH value of 8.5 to 9.5, a pigment content of 35% ± 1%, and a water value of 57% ± 1%. This product has good flocculation resistance and printing properties, and is used in pigment printing preparations for water based flexo and gravure printings inks. 收起 | |
| MK-Hydroflex Blue P. B. 61, VPA 941/2 | mk chemicals | MK-Hydroflex Blue P. B. 61, VPA 941/2 is a blue colored pasty to liquid pigment. It has a pH value of 7.5 to 8.5, a pigment content of 30% ± 1%, and a water value of 59% ± 1%. This product has good flocculation resistance and printing properties, and is u...展開 MK-Hydroflex Blue P. B. 61, VPA 941/2 is a blue colored pasty to liquid pigment. It has a pH value of 7.5 to 8.5, a pigment content of 30% ± 1%, and a water value of 59% ± 1%. This product has good flocculation resistance and printing properties, and is used in pigment printing preparations for water based flexo and gravure printings inks. 收起 | |
| MK-Hydroflex Fanal Rosa 169 | mk chemicals | MK-Hydroflex Fanal Rosa 169 is a red colored pigment. It has a pH value of 7.0 to 9.0, a pigment content of 30% ± 1%, and a water value of 55% ± 1%. This product has good flocculation resistance and printing properties, and is used in pigment printing pre...展開 MK-Hydroflex Fanal Rosa 169 is a red colored pigment. It has a pH value of 7.0 to 9.0, a pigment content of 30% ± 1%, and a water value of 55% ± 1%. This product has good flocculation resistance and printing properties, and is used in pigment printing preparations for water based flexo and gravure printings inks. 收起 | |
| MK-Hydroflex Fanal Rose 81:2 | mk chemicals | MK-Hydroflex Fanal Rose 81:2 is a red colored pigment. It has a pH value of 7.0 to 9.0, a pigment content of 35% ± 1%, and a water value of 50% ± 1%. This product has good flocculation resistance and printing properties, and is used in pigment printing pr...展開 MK-Hydroflex Fanal Rose 81:2 is a red colored pigment. It has a pH value of 7.0 to 9.0, a pigment content of 35% ± 1%, and a water value of 50% ± 1%. This product has good flocculation resistance and printing properties, and is used in pigment printing preparations for water based flexo and gravure printings inks. 收起 | |
| MK-Hydroflex Green P. G. 7, VPA 895/3 | mk chemicals | MK-Hydroflex Green P. G. 7, VPA 895/3 is a green colored pasty to liquid pigment. It has a pH value of 7.5 to 9.5, a pigment content of 50% ± 1%, and a water value of 50% ± 1%. This product has good flocculation resistance and printing properties, and is ...展開 MK-Hydroflex Green P. G. 7, VPA 895/3 is a green colored pasty to liquid pigment. It has a pH value of 7.5 to 9.5, a pigment content of 50% ± 1%, and a water value of 50% ± 1%. This product has good flocculation resistance and printing properties, and is used in pigment printing preparations for water based flexo and gravure printings inks. 收起 | |
| MK-Hydroflex Orange P. O. 13, VPA 895/4 | mk chemicals | mk-Hydroflex Orange P. O. 13, VPA 895/4 is an orange colored pasty to liquid pigment. It has a pH value of 7.5 to 9.5, a pigment content of 30% ± 1%, and a water value of 70% ± 1%. This product has good flocculation resistance and printing properties, and...展開 mk-Hydroflex Orange P. O. 13, VPA 895/4 is an orange colored pasty to liquid pigment. It has a pH value of 7.5 to 9.5, a pigment content of 30% ± 1%, and a water value of 70% ± 1%. This product has good flocculation resistance and printing properties, and is used in pigment printing preparations for water based flexo and gravure printings inks. 收起 | |
| MK-Hydroflex Orange P. O. 13, VPA 948 | mk chemicals | MK-Hydroflex Orange P. O. 13, VPA 948 is an orange colored pasty to liquid pigment. It has a pH value of 8.5 to 10.0, a pigment content of 40% ± 1%, and a water value of 49% ± 1%. This product has good flocculation resistance and printing properties, and ...展開 MK-Hydroflex Orange P. O. 13, VPA 948 is an orange colored pasty to liquid pigment. It has a pH value of 8.5 to 10.0, a pigment content of 40% ± 1%, and a water value of 49% ± 1%. This product has good flocculation resistance and printing properties, and is used in pigment printing preparations for water based flexo and gravure printings inks. 收起 | |
| MK-Hydroflex Orange P. O. 5, VPA 941/1 | mk chemicals | MK-Hydroflex Orange P. O. 5, VPA 941/1 is an orange colored pasty to liquid pigment. It has a pH value of 8.5 to 9.5, a pigment content of 35% ± 1%, and a water value of 54% ± 1%. This product has good flocculation resistance and printing properties, and...展開 MK-Hydroflex Orange P. O. 5, VPA 941/1 is an orange colored pasty to liquid pigment. It has a pH value of 8.5 to 9.5, a pigment content of 35% ± 1%, and a water value of 54% ± 1%. This product has good flocculation resistance and printing properties, and is used in pigment printing preparations for water based flexo and gravure printings inks. 收起 | |
| MK-Hydroflex P. R. 81:5, VPA 948/6 | mk chemicals | MK-Hydroflex P. R. 81:5, VPA 948/6 is a red colored pasty to liquid pigment. It has a pH value of 7.5 to 8.5, a pigment content of 26.5% ± 1%, and a water value of 65% ± 1%. This product has good flocculation resistance and printing properties, and is use...展開 MK-Hydroflex P. R. 81:5, VPA 948/6 is a red colored pasty to liquid pigment. It has a pH value of 7.5 to 8.5, a pigment content of 26.5% ± 1%, and a water value of 65% ± 1%. This product has good flocculation resistance and printing properties, and is used in pigment printing preparations for water based flexo and gravure printings inks. 收起 | |
| MK-Hydroflex Red P. R. 122, VPA 477/8 | mk chemicals | MK-Hydroflex Red P. R. 122, VPA 477/8 is a red colored pasty to liquid pigment. It has a pH value of 10.0 to 11.5, a pigment content of 35% ± 1%, and a water value of 44% ± 1%. This product has good flocculation resistance and printing properties, and is ...展開 MK-Hydroflex Red P. R. 122, VPA 477/8 is a red colored pasty to liquid pigment. It has a pH value of 10.0 to 11.5, a pigment content of 35% ± 1%, and a water value of 44% ± 1%. This product has good flocculation resistance and printing properties, and is used in pigment printing preparations for water based flexo and gravure printings inks. 收起 | |
| MK-Hydroflex Red P. R. 2, VPA 895 | mk chemicals | MK-Hydroflex Red P. R. 2, VPA 895 is a red colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 40% ± 1%, and a water value of 41% ± 1%. This product has good flocculation resistance and printing properties, and is used i...展開 MK-Hydroflex Red P. R. 2, VPA 895 is a red colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 40% ± 1%, and a water value of 41% ± 1%. This product has good flocculation resistance and printing properties, and is used in pigment printing preparations for water based flexo and gravure printings inks. 收起 | |
| MK-Hydroflex Red P. R. 57:1, VPA 941/3 | mk chemicals | MK-Hydroflex Red P. R. 57:1, VPA 941/3 is a red colored pasty to liquid pigment. It has a pH value of 8.0 to 9.0, a pigment content of 40% ± 1%, and a water value of 52% ± 1%. This product has good flocculation resistance and printing properties, and is u...展開 MK-Hydroflex Red P. R. 57:1, VPA 941/3 is a red colored pasty to liquid pigment. It has a pH value of 8.0 to 9.0, a pigment content of 40% ± 1%, and a water value of 52% ± 1%. This product has good flocculation resistance and printing properties, and is used in pigment printing preparations for water based flexo and gravure printings inks. 收起 | |
| MK-Hydroflex Violet , C. I. 3, VPA 852/18 | mk chemicals | MK-Hydroflex Violet , C. I. 3, VPA 852/18 is a purple colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 40% ± 1%, and a water value of 49% ± 1%. This product has good flocculation resistance and printing properties, an...展開 MK-Hydroflex Violet , C. I. 3, VPA 852/18 is a purple colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 40% ± 1%, and a water value of 49% ± 1%. This product has good flocculation resistance and printing properties, and is used in pigment printing preparations for water based flexo and gravure printings inks. 收起 | |
| MK-Hydroflex Yellow P. Y. 13, VPA 852/33 | mk chemicals | MK-Hydroflex Yellow P. Y. 13, VPA 852/33 is a yellow colored pasty to liquid pigment. It has a pH value of 8.5 to 10.0, a pigment content of 40% ± 1%, and a water value of 49% ± 1%. This product has good flocculation resistance and printing properties, an...展開 MK-Hydroflex Yellow P. Y. 13, VPA 852/33 is a yellow colored pasty to liquid pigment. It has a pH value of 8.5 to 10.0, a pigment content of 40% ± 1%, and a water value of 49% ± 1%. This product has good flocculation resistance and printing properties, and is used in pigment printing preparations for water based flexo and gravure printings inks. 收起 | |
| MK-Hydroflex Yellow P. Y. 13, VPA 852/35 | mk chemicals | MK-Hydroflex Yellow P. Y. 13, VPA 852/35 is a yellow colored pasty to liquid pigment. It has a pH value of 8.0 to 10.0, a pigment content of 40% ± 1%, and a water value of 57.7% ± 1%. This product has good flocculation resistance and printing properties, ...展開 MK-Hydroflex Yellow P. Y. 13, VPA 852/35 is a yellow colored pasty to liquid pigment. It has a pH value of 8.0 to 10.0, a pigment content of 40% ± 1%, and a water value of 57.7% ± 1%. This product has good flocculation resistance and printing properties, and is used in pigment printing preparations for water based flexo and gravure printings inks. 收起 | |
| MK-Hydroflex Yellow P. Y. 138, VPA 477/16 | mk chemicals | MK-Hydroflex Yellow P. Y. 138, VPA 477/16 is a yellow colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 35% ± 1%, and a water value of 56% ± 1%. This product has good flocculation resistance and printing properties, an...展開 MK-Hydroflex Yellow P. Y. 138, VPA 477/16 is a yellow colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 35% ± 1%, and a water value of 56% ± 1%. This product has good flocculation resistance and printing properties, and is used in pigment printing preparations for water based flexo and gravure printings inks. 收起 | |
| MK-Hydroflex Yellow P. Y. 14, VPA 852/30 | mk chemicals | MK-Hydroflex Yellow P. Y. 14, VPA 852/30 is a yellow colored pasty to liquid pigment. It has a pH value of 8.5 to 10.0, a pigment content of 40% ± 1%, and a water value of 49% ± 1%. This product has good flocculation resistance and printing properties, an...展開 MK-Hydroflex Yellow P. Y. 14, VPA 852/30 is a yellow colored pasty to liquid pigment. It has a pH value of 8.5 to 10.0, a pigment content of 40% ± 1%, and a water value of 49% ± 1%. This product has good flocculation resistance and printing properties, and is used in pigment printing preparations for water based flexo and gravure printings inks. 收起 | |
| MK-Hydroflex Yellow P. Y. 17, VPA 941/5 | mk chemicals | MK-Hydroflex Yellow P. Y. 17, VPA 941/5 is a yellow colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 40% ± 1%, and a water value of 48% ± 1%. This product has good flocculation resistance and printing properties, and ...展開 MK-Hydroflex Yellow P. Y. 17, VPA 941/5 is a yellow colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 40% ± 1%, and a water value of 48% ± 1%. This product has good flocculation resistance and printing properties, and is used in pigment printing preparations for water based flexo and gravure printings inks. 收起 | |
| MK-Hydroflex Yellow P. Y. 74, VPA 852/36 | mk chemicals | MK-Hydroflex Yellow P. Y. 74, VPA 852/36 is a yellow colored pasty to liquid pigment. It has a pH value of 8.0 to 10.0, a pigment content of 40% ± 1%, and a water value of 52.5% ± 1%. This product has good flocculation resistance and printing properties, ...展開 MK-Hydroflex Yellow P. Y. 74, VPA 852/36 is a yellow colored pasty to liquid pigment. It has a pH value of 8.0 to 10.0, a pigment content of 40% ± 1%, and a water value of 52.5% ± 1%. This product has good flocculation resistance and printing properties, and is used in pigment printing preparations for water based flexo and gravure printings inks. 收起 | |
| MK-Hydroflex Yellow P. Y. 83, VPA 477/9 | mk chemicals | MK-Hydroflex Yellow P. Y. 83, VPA 477/9 is a yellow colored pasty to liquid pigment. It has a pH value of 7.0 to 9.0, a pigment content of 35% ± 1%, and a water value of 51% ± 1%. This product has good flocculation resistance and printing properties, and ...展開 MK-Hydroflex Yellow P. Y. 83, VPA 477/9 is a yellow colored pasty to liquid pigment. It has a pH value of 7.0 to 9.0, a pigment content of 35% ± 1%, and a water value of 51% ± 1%. This product has good flocculation resistance and printing properties, and is used in pigment printing preparations for water based flexo and gravure printings inks. 收起 | |
| Panax Blue FB-805 | mk chemicals | Panax Blue FB-805 is a blue colored powdered pigment. It has a particle size of 5 µm, a pH value of 4.0 to 6.0, and a bulk volume of 280 cubic centimeters per 100 grams. This product is used in paper coatings, printing inks, paints, and textile coatings. | |
| Panax Green FB-905 | mk chemicals | Panax Green FB-905 is a green colored powdered pigment. It has a particle size of 5 µm, a pH value of 4.0 to 6.0, and a bulk volume of 280 cubic centimeters per 100 grams. This product is used in paper coatings, printing inks, paints, and textile coatings...展開 Panax Green FB-905 is a green colored powdered pigment. It has a particle size of 5 µm, a pH value of 4.0 to 6.0, and a bulk volume of 280 cubic centimeters per 100 grams. This product is used in paper coatings, printing inks, paints, and textile coatings. 收起 | |
| Panax Orange FB-305 | mk chemicals | Panax Orange FB-305 is an orange colored powdered pigment. It has a particle size of 5 µm, a pH value of 4.0 to 6.0, and a bulk volume of 280 cubic centimeters per 100 grams. This product is used in paper coatings, printing inks, paints, and textile coati...展開 Panax Orange FB-305 is an orange colored powdered pigment. It has a particle size of 5 µm, a pH value of 4.0 to 6.0, and a bulk volume of 280 cubic centimeters per 100 grams. This product is used in paper coatings, printing inks, paints, and textile coatings. 收起 | |
| Panax Red FB-403 | mk chemicals | Panax Red FB-403 is a red colored powdered pigment. It has a particle size of 5 µm, a pH value of 4.0 to 6.0, and a bulk volume of 280 cubic centimeters per 100 grams. This product is used in paper coatings, printing inks, paints, and textile coatings. | |
| Panax Rose FB-507 | mk chemicals | Panax Rose FB-507 is a pink colored powdered pigment. It has a particle size of 5 µm, a pH value of 4.0 to 6.0, and a bulk volume of 280 cubic centimeters per 100 grams. This product is used in paper coatings, printing inks, paints, and textile coatings. | |
| Panax Yellow FB-205 | mk chemicals | Panax Yellow FB-205 is a yellow colored powdered pigment. It has a particle size of 5 µm, a pH value of 4.0 to 6.0, and a bulk volume of 280 cubic centimeters per 100 grams. This product is used in paper coatings, printing inks, paints, and textile coatin...展開 Panax Yellow FB-205 is a yellow colored powdered pigment. It has a particle size of 5 µm, a pH value of 4.0 to 6.0, and a bulk volume of 280 cubic centimeters per 100 grams. This product is used in paper coatings, printing inks, paints, and textile coatings. 收起 | |
| PT 312 | BIP (Oldbury) Ltd | PT 312 is a methylated melamine resin. It is a clear, water white, resin for cross linking or for stiffening of all fibre types. It has a low free formaldehyde version PT 338. | |
| PT 336 | BIP (Oldbury) Ltd | PT 336 Methylated melamine resin. It is a clear, water white, resin for cross linking or for stiffening and binding of all fibre types. This product exhibits medium to high reactivity. | |
| PT 350 | BIP (Oldbury) Ltd | PT 350 is a modified reactant resin. Primarily used as a cross Linking Resins for Acrylic Pastes and coatings and use as fabric stiffeners or binders. It combines easy care with additive fixation. | |
| PT 368 | BIP (Oldbury) Ltd | PT 368 is a modified methylated melamine resin. It can be used to create a cost effective stiffening agent and binder. | |
| PT 370 | BIP (Oldbury) Ltd | PT 370 is a fully methylated HMMM resin. It is primarily used as a cross linking agent for synthetic, natural rubber latex and PUD's, chlorine resist finish and bonding of non woven material. | |
| PT 3745 | BIP (Oldbury) Ltd | PT 3745 is a fully methylated HMMM resin. Primarily used as a cross linking agent for synthetic, natural rubber latex and PUD's, chlorine resist finish and bonding of non woven material. | |
| PT 727 | BIP (Oldbury) Ltd | PT 727 is a modified urea formaldehyde polymer. It is a clear, straw coloured cationic liquid. Primarily used for anchoring thermoplastic coatings to regenerated cellulose film. | |
| Surkofilm® 64S | BIP (Oldbury) Ltd | Surkofilm® 64S is a polymer that contains both polyether and polyester aliphatic and some aromatic high molecular weight structures. The product comprises a range of solvent based film forming urethanes which are used on a wide variety of substrates where...展開 Surkofilm® 64S is a polymer that contains both polyether and polyester aliphatic and some aromatic high molecular weight structures. The product comprises a range of solvent based film forming urethanes which are used on a wide variety of substrates where demanding performance calls for high quality inks. Surkofilm® polymers have been formulated to low non volatile content with special grades for vinyl substrates in combination with vinyl co-polymers. It imparts softness and flexibility for reverse printing on PE and OPP. 收起 | |
| Surkofilm® 1137 | BIP (Oldbury) Ltd | Surkofilm® 1137 is a polymer that contains both polyether and polyester aliphatic and some aromatic high molecular weight structures. The product comprises a range of solvent based film forming urethanes which are used on a wide variety of substrates wher...展開 Surkofilm® 1137 is a polymer that contains both polyether and polyester aliphatic and some aromatic high molecular weight structures. The product comprises a range of solvent based film forming urethanes which are used on a wide variety of substrates where demanding performance calls for high quality inks. Surkofilm® polymers have been formulated to low non volatile content with special grades for vinyl substrates in combination with vinyl co-polymers. Primarily used in the production of lamination inks, mono-component or in combination with nitrocellulose as well as vinyl resins. 收起 | |
| Surkofilm® 62H | BIP (Oldbury) Ltd | Surkofilm® 62H is a polymer that contains both polyether and polyester aliphatic and some aromatic high molecular weight structures. The product comprises a range of solvent based film forming urethanes which are used on a wide variety of substrates where...展開 Surkofilm® 62H is a polymer that contains both polyether and polyester aliphatic and some aromatic high molecular weight structures. The product comprises a range of solvent based film forming urethanes which are used on a wide variety of substrates where demanding performance calls for high quality inks. Surkofilm® polymers have been formulated to low non volatile content with special grades for vinyl substrates in combination with vinyl co-polymers. It is a harder version Surkofilm® 64S. 收起 | |
| Surkofilm® 653H | BIP (Oldbury) Ltd | Surkofilm® 653H is a polymer that contains both polyether and polyester aliphatic and some aromatic high molecular weight structures. The product comprises a range of solvent based film forming urethanes which are used on a wide variety of substrates wher...展開 Surkofilm® 653H is a polymer that contains both polyether and polyester aliphatic and some aromatic high molecular weight structures. The product comprises a range of solvent based film forming urethanes which are used on a wide variety of substrates where demanding performance calls for high quality inks. Surkofilm® polymers have been formulated to low non volatile content with special grades for vinyl substrates in combination with vinyl co-polymers. it can be used in flexographic or gravure lamination and surface printing. as well as in combination with nitrocellulose or vinyl resin for the production of retortable inks. 收起 | |
| Surkofilm® 71H | BIP (Oldbury) Ltd | Surkofilm® 71H is a polymer that contains both polyether and polyester aliphatic and some aromatic high molecular weight structures. The product comprises a range of solvent based film forming urethanes which are used on a wide variety of substrates where...展開 Surkofilm® 71H is a polymer that contains both polyether and polyester aliphatic and some aromatic high molecular weight structures. The product comprises a range of solvent based film forming urethanes which are used on a wide variety of substrates where demanding performance calls for high quality inks. Surkofilm® polymers have been formulated to low non volatile content with special grades for vinyl substrates in combination with vinyl co-polymers. It is used for the production of lamination inks for nylon and other films. 收起 | |
| Surkofilm® 72S | BIP (Oldbury) Ltd | Surkofilm® 72S is a polymer that contains both polyether and polyester aliphatic and some aromatic high molecular weight structures. The product comprises a range of solvent based film forming urethanes which are used on a wide variety of substrates where...展開 Surkofilm® 72S is a polymer that contains both polyether and polyester aliphatic and some aromatic high molecular weight structures. The product comprises a range of solvent based film forming urethanes which are used on a wide variety of substrates where demanding performance calls for high quality inks. Surkofilm® polymers have been formulated to low non volatile content with special grades for vinyl substrates in combination with vinyl co-polymers. It is generally used for reverse printing & lamination inks. 收起 | |
| Surkofilm® 90H | BIP (Oldbury) Ltd | Surkofilm® 90H is a polymer that contains both polyether and polyester aliphatic and some aromatic high molecular weight structures. The product comprises a range of solvent based film forming urethanes which are used on a wide variety if substrates where...展開 Surkofilm® 90H is a polymer that contains both polyether and polyester aliphatic and some aromatic high molecular weight structures. The product comprises a range of solvent based film forming urethanes which are used on a wide variety if substrates where demanding performance calls for high quality inks. Surkofilm® polymers have been formulated to low non volatile content with special grades for vinyl substrates in combination with vinyl co-polymers. It has low viscosity and a hard PU component when in combination with vinyl resins. 收起 | |
| Surkofilm® MR 132 | BIP (Oldbury) Ltd | Surkofilm® MR 132 is a polymer that contains both polyether and polyester aliphatic and some aromatic high molecular weight structures. The product comprises a range of solvent based film forming urethanes which are used on a wide variety of substrates wh...展開 Surkofilm® MR 132 is a polymer that contains both polyether and polyester aliphatic and some aromatic high molecular weight structures. The product comprises a range of solvent based film forming urethanes which are used on a wide variety of substrates where demanding performance calls for high quality inks. Surkofilm® polymers have been formulated to low non volatile content with special grades for vinyl substrates in combination with vinyl co-polymers. Surkofilm® MR 132 is a mixed aromatic/aliphatic polyurethane for reverse printing onto PE & OPP. 收起 | |
| Surkopak® 2135 | BIP (Oldbury) Ltd | Surkopak® 2135, based on ethyl acetate, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied to bot...展開 Surkopak® 2135, based on ethyl acetate, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied to both rigid and flexible substrates. It is soft, very flexible and has excellent solvent release properties. 收起 | |
| Surkopak® 5241 | BIP (Oldbury) Ltd | Surkopak® 5241, based on ethyl acetate, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied to bot...展開 Surkopak® 5241, based on ethyl acetate, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied to both rigid and flexible substrates. It is a solvent free version SP 5244. 收起 | |
| Surkopak® 5244 | BIP (Oldbury) Ltd | Surkopak® 5244, based on ethyl acetate, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied to bot...展開 Surkopak® 5244, based on ethyl acetate, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied to both rigid and flexible substrates. General purpose, flexo-graphic and gravure inks. 收起 | |
| Surkopak® 5245 | BIP (Oldbury) Ltd | Surkopak® 5245, based on ethyl acetate, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied to bot...展開 Surkopak® 5245, based on ethyl acetate, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied to both rigid and flexible substrates. It has improved alcohol tolerance compared to SP 5244. 收起 | |
| Surkopak® 5246 | BIP (Oldbury) Ltd | Surkopak® 5246, based on ethyl acetate, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied to bot...展開 Surkopak® 5246, based on ethyl acetate, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied to both rigid and flexible substrates. It has lower solids and viscosity compared to SP 5245. 收起 | |
| Surkopak® 5255 | BIP (Oldbury) Ltd | Surkopak® 5255, based on ethyl acetate, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied to bot...展開 Surkopak® 5255, based on ethyl acetate, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied to both rigid and flexible substrates. It is a harder version of SP 5244. 收起 | |
| Surkopak® 5311 | BIP (Oldbury) Ltd | Surkopak® 5311, based on ethyl acetate / IP, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied t...展開 Surkopak® 5311, based on ethyl acetate / IP, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied to both rigid and flexible substrates. It is a harder version of SP 5323. 收起 | |
| Surkopak® 5323 | BIP (Oldbury) Ltd | Surkopak® 5323, based on ethyl acetate / IP, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied t...展開 Surkopak® 5323, based on ethyl acetate / IP, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied to both rigid and flexible substrates. It has increased hardness when compared to SP 5255 and can be used in surface, reverse & lamination processes. 收起 | |
| Surkopak® X | BIP (Oldbury) Ltd | Surkopak® X, based on ethyl acetate, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied to both r...展開 Surkopak® X, based on ethyl acetate, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied to both rigid and flexible substrates. It can be used on hard grade surfaces and in reverse and lamination processes. 收起 |
