| Kemox RC 800 | The Kerala Minerals & Metals Ltd | Kemox RC 800 is a rutile titanium dioxide pigment produced by the chloride process. This product has a specific gravity of 4.1 and a pH value of 6.0. It is most commonly used in printing ink, high gloss and industrial coating applications. | |
| Kemox RC 802 | The Kerala Minerals & Metals Ltd | Kemox RC 802 is a multi purpose superior performance rutile titanium dioxide pigment produced by the chloride process. This product has a specific gravity of 4 and a pH value of 7.4. It is most commonly used in architectural and industrial paints. | |
| Kemox RC 808 | The Kerala Minerals & Metals Ltd | Kemox RC 808 is a rutile titanium dioxide pigment produced by the chloride process. This product has a specific gravity of 4 and a pH value of 7.3. It is most commonly used in coil coating, emulsion paint systems powder coating, water borne coating, and p...展開 Kemox RC 808 is a rutile titanium dioxide pigment produced by the chloride process. This product has a specific gravity of 4 and a pH value of 7.3. It is most commonly used in coil coating, emulsion paint systems powder coating, water borne coating, and printing ink applications. 收起 | |
| Kemox RC 813 | The Kerala Minerals & Metals Ltd | Kemox RC 813 is a rutile pigment produced by the chloride process. This product has a specific gravity of 3.73 and a pH value of 7.1. It is most commonly used in both interior and exterior low gloss and flat paints and coatings in both solvent and water b...展開 Kemox RC 813 is a rutile pigment produced by the chloride process. This product has a specific gravity of 3.73 and a pH value of 7.1. It is most commonly used in both interior and exterior low gloss and flat paints and coatings in both solvent and water based applications. 收起 | |
| Kemox RC 822 | The Kerala Minerals & Metals Ltd | Kemox RC 822 is a rutile titanium dioxide pigment produced by the chloride process. This product has a specific gravity of 4 and a pH value of 7.1. It is most commonly used for interior and exterior enamels and lacquers for industrial and architectural ap...展開 Kemox RC 822 is a rutile titanium dioxide pigment produced by the chloride process. This product has a specific gravity of 4 and a pH value of 7.1. It is most commonly used for interior and exterior enamels and lacquers for industrial and architectural applications. 收起 | |
| Nepa Fast Blue 43150 | Nepa Overseas | Nepa Fast Blue 43150 is a pigment that comes in the form of a blue odorless powder. It has a specific gravity of 1.72 and a particle size of 325 mesh. Nepa Fast Blue 43150 is used in paint and ink applications. | |
| Nepa Fast Blue 43151-LI | Nepa Overseas | Nepa Fast Blue 43151-LI is a pigment used in liquid inks. It has an oil absorption of 46.5 and a bulk volume of 2.1 cc/gm. | |
| Nepa Fast Blue 43151-OI | Nepa Overseas | Nepa Fast Blue 43151-OI is a pigment used in offset inks. It has an oil absorption of 43.5-45.5 and a bulk volume of 2.6-2.7 cc/gm. | |
| Nepa Fast Blue 43754 | Nepa Overseas | Nepa Fast Blue 43754 is a pigment used in paints and liquid inks. It has an oil absorption of 40 and a bulk volume of 1.9 cc/gm. | |
| Nepa Fast Green 43157 | Nepa Overseas | Nepa Fast Green 43157 is a pigment that comes in a green powder, used in paints and inks. It has an oil absorption of 35 and a bulk volume of 2.5 cc/gm. | |
| Polurene FP75 | S.A.P.I.C.I. SpA | Polurene FP75 is a polyurethane adduct with low free TDI content. This product meets EU, BFR, and FDA standards for food packaging. It can be used in 2K adhesives and inks. Polurene FP75 contains less than .5% TDI isocyanates. | |
| Polurene IR 51 AE | S.A.P.I.C.I. SpA | Polurene IR 51 AE is an isocyanurate with low free TDI content. This product dries quickly with limited yellowing. It can be used in polyurethane sealers, matt topcoats, adhesives, and inks. This product contains less than .3% TDI isocyanates. | |
| Polurene IR 51 K | S.A.P.I.C.I. SpA | Polurene IR 51 K is an aromatic isocyanurate based on toluenediisocyanate. This product cures quickly, with limited yellowing, good elasticity, and felxibility. It can be used in combination with any Rexin K saturated polyester in order to product prime...展開 Polurene IR 51 K is an aromatic isocyanurate based on toluenediisocyanate. This product cures quickly, with limited yellowing, good elasticity, and felxibility. It can be used in combination with any Rexin K saturated polyester in order to product primer or overprint varnishes. 收起 | |
| Polurene OK K | S.A.P.I.C.I. SpA | Polurene OK K is an aliphatic-aromatic isocyanurate. This product dries quickly. If used in combination with saturated polyesters, it can be used in the formulation of overprinting coatings and for inks with good non-yellowing properties. | |
| Polurene OK.D AE | S.A.P.I.C.I. SpA | Polurene OK.D AE is an aliphatic-aromatic isocyanurate. This product is compatible with nitrocellulose. It can be used in polishable varnishes and enamels for wood. It can also be used in enamels with good colour retention for metal, plastics and other...展開 Polurene OK.D AE is an aliphatic-aromatic isocyanurate. This product is compatible with nitrocellulose. It can be used in polishable varnishes and enamels for wood. It can also be used in enamels with good colour retention for metal, plastics and other substrates. Finally, it can be used in polyurethane adhesives and inks. This product contains less than .5% TDI or HDI isocyanates. 收起 | |
| Polurene T 70 AE | S.A.P.I.C.I. SpA | Polurene T 70 AE is an aliphatic polyisocyanate. When diluted, this product can be used to improve the performance of short or long oil drying resins. It can be used in 2K laminating adhesives and inks. It can also be used in 2K polyurethane coatings w...展開 Polurene T 70 AE is an aliphatic polyisocyanate. When diluted, this product can be used to improve the performance of short or long oil drying resins. It can be used in 2K laminating adhesives and inks. It can also be used in 2K polyurethane coatings with good chemical and weather resistance. This product contains less than .5% IPDI isocyanates. 收起 | |
| Polurgreen FP75-01 | S.A.P.I.C.I. SpA | Polurgreen FP75-01 is a polyurethane adduct. This product contains less than .1% TDI isocyanates. It may be used in 2K adhesives and inks. Polurgreen FP75-01 is in accord with EU, BFR, and FDA regulations for food packaging. | |
| Rexin K 1939 | S.A.P.I.C.I. SpA | Rexin K 1939 is a solvent-based hydroxy-terminated saturated polyester resin. When used in the formulation of inks, this product's end result is light, clear, not sticky and highly resistant to aging, chemical agents, and heat. It can be used in the for...展開 Rexin K 1939 is a solvent-based hydroxy-terminated saturated polyester resin. When used in the formulation of inks, this product's end result is light, clear, not sticky and highly resistant to aging, chemical agents, and heat. It can be used in the formulation of 2K polyurethane overprinting lacquers and inks. 收起 | |
| Rexin K 411 | S.A.P.I.C.I. SpA | Rexin K 411 is a branched saturated polyester. This product has high chemical resistance, abrasion resistance, and surface hardness. It is compatible with nitrocellulose, urea, and melamine resins. This product can be used in high-performance inks for ...展開 Rexin K 411 is a branched saturated polyester. This product has high chemical resistance, abrasion resistance, and surface hardness. It is compatible with nitrocellulose, urea, and melamine resins. This product can be used in high-performance inks for prolonged and continuous use. 收起 | |
| Rexin K 6258 | S.A.P.I.C.I. SpA | Rexin K 6258 is a branched saturated polyester resin that is soluble in ethyl acetate. This product is compatible with nitrocellulose, urea and melamine resins. It can be used in the formulation of inks and overprint varnishes. | |
| Rexin K 6302 | S.A.P.I.C.I. SpA | Rexin K 6302 is a polyester resin. This product is soluble in ethyl acetate. It can be used in the formulation of inks and overprint varnishes. | |
| Tytanpol® R-003 | Grupa Azoty | Tytanpol® R-003 is a white fine-milled powder made of titanium dioxide with a rutile crystallographic structure. It is nontoxic, non-flammable and chemically inactive. It has been subjected to surface treatment with aluminium and zirconium compounds (3%...展開 Tytanpol® R-003 is a white fine-milled powder made of titanium dioxide with a rutile crystallographic structure. It is nontoxic, non-flammable and chemically inactive. It has been subjected to surface treatment with aluminium and zirconium compounds (3% as Al2O3 and 0.35% as ZrO2) and modified with hydrophilic organic compounds. TYTANPOL® R-003 is pigment intended for universal use, and it is especially recommended for high-quality indoor and outdoor paints, powder coatings , road marking paints, UV curable paints, wallpapers and paper coatings. This pigment type can be used effectively for pigmenting plastics and for high-gloss printing inks. 收起 | |
| Tytanpol® R-001 | Grupa Azoty | Tytanpol® R-001 is a white fine-milled powder made of titanium dioxide with a rutile crystallographic structure. It is nontoxic, non-flammable and chemically inactive. It has been subjected to surface treatment with aluminum compounds (3% as Al2O3) and mo...展開 Tytanpol® R-001 is a white fine-milled powder made of titanium dioxide with a rutile crystallographic structure. It is nontoxic, non-flammable and chemically inactive. It has been subjected to surface treatment with aluminum compounds (3% as Al2O3) and modified with hydrophilic organic compounds. TYTANPOL® R-001 is widely used and especially recommended for indoor paints, high-gloss printing inks, powder coatings, VC, plastisols, polyolefines, unsaturated polyesters, polyester gel coats, vinyl floor lining, linoleum and sealing compounds. 收起 | |
| Tytanpol® R-211 | Grupa Azoty | Tytanpol® R-211 is a white fine-milled powder made of titanium dioxide with a rutile crystallographic structure. It is nontoxic, non-flammable and chemically inactive. It has been subjected to surface treatment with aluminium and silicon compounds (4.0% a...展開 Tytanpol® R-211 is a white fine-milled powder made of titanium dioxide with a rutile crystallographic structure. It is nontoxic, non-flammable and chemically inactive. It has been subjected to surface treatment with aluminium and silicon compounds (4.0% as Al2O3 and 2% as SiO2) and modified with hydrophilic organic compounds. TYTANPOL® R-211 is recommended for semi-matt and matt products, where resistance to atmospheric conditions, colour retention and high resistance to chalking are required. It is recommend for a wide range of paints and powder coatings with additional applications in inks, plastics, plasters, cement, adhesives and other silicone products. 收起 | |
| Tytanpol® R-213 | Grupa Azoty | Tytanpol® R-213 is a white fine-milled powder made of titanium dioxide with a rutile crystallographic structure. It is nontoxic, non-flammable and chemically inactive. It has been subjected to surface treatment with aluminium and silicon compounds (4.7% a...展開 Tytanpol® R-213 is a white fine-milled powder made of titanium dioxide with a rutile crystallographic structure. It is nontoxic, non-flammable and chemically inactive. It has been subjected to surface treatment with aluminium and silicon compounds (4.7% as Al2O3 and 8.3% as SiO2) and modified with hydrophilic organic compounds. TYTANPOL® R-213 is especially recommended for paints with a high pigment volume concentration: matt emulsion paints, matt solvent paints (e.g. primers), latex paints, matt printing inks (screen, gravure, lithographic) and textile paints. This pigment is also recommended for some road markings paints, matt flexographic paints, as well as pulp and paper coatings, wallpapers, plasters, putties and fillers. 收起 | |
| Ucopol M 33/65 K | S.A.P.I.C.I. SpA | Ucopol M 33/65 K is an aromatic moisture-curing polyurethane resin. This product has good wetting of different substrates and inks, and is compatible with alkyds, saturated polyester resins, nitrocellulose and vinyl co-polymers. It can be used in overpr...展開 Ucopol M 33/65 K is an aromatic moisture-curing polyurethane resin. This product has good wetting of different substrates and inks, and is compatible with alkyds, saturated polyester resins, nitrocellulose and vinyl co-polymers. It can be used in overprint varnishes and flexographic processes. 收起 | |
| Ucopol OL 100 | S.A.P.I.C.I. SpA | Ucopol OL 100 is an oleo-urethanic resin. This product has good wetting properties. It can be used as an impregnating agent for wood, and in the formulation of 1K enamels with high solids content. It can also be used for the formulation of printing ink...展開 Ucopol OL 100 is an oleo-urethanic resin. This product has good wetting properties. It can be used as an impregnating agent for wood, and in the formulation of 1K enamels with high solids content. It can also be used for the formulation of printing inks and pigmented pastes. This product has been obtained from renewable raw materials. 收起 |
