| Bisomer® Amine D700 | GEO Specialty Chemicals, Inc.TRIMET Products Group | 多功能氨基醇助劑 | |
| Bisomer® BZMA | GEO Specialty Chemicals, Inc.TRIMET Products Group | Bisomer® BZMA (Benzyl Methacrylate) is low viscosity mono-functional monomer suitable for a wide range of applications. It is low viscosity and hydrophobic, and is particularly suitable as a reactive diluent in adhesives, sealants, inks and coatings. This...展開 Bisomer® BZMA (Benzyl Methacrylate) is low viscosity mono-functional monomer suitable for a wide range of applications. It is low viscosity and hydrophobic, and is particularly suitable as a reactive diluent in adhesives, sealants, inks and coatings. This product has a methoxyhydroquinone content of 50 ± 5ppm, an acid number of < 0.02mg KOH/g, and a refractive index @ 20°C of 1.51. It can be used as a co-monomer in PMMA based acrylic formulations to increase the impact resistance, hydrophobicity and structural integrity of resins, composites and coatings. It is also particularly useful as a replacement for styrene in unsaturated polyester and vinyl ester resins used in a wide range of applications including chemical fixings and composites. Due to its high refractive index, Bisomer® BZMA is also suitable for cast lenses, optical fibres, transparent laminates and other applications where clarity is a key requirement. 收起 | |
| Bisomer® CHMA | GEO Specialty Chemicals, Inc.TRIMET Products Group | Bisomer® CHMA is a hydrophobic methacrylate monomer. It is a mono-functional methacrylate, making it ideal for acrylic polymer synthesis. Bisomer® CHMA can be used to improve the hydrophobicity, weathering, physical and chemical resistance of acrylic resi...展開 Bisomer® CHMA is a hydrophobic methacrylate monomer. It is a mono-functional methacrylate, making it ideal for acrylic polymer synthesis. Bisomer® CHMA can be used to improve the hydrophobicity, weathering, physical and chemical resistance of acrylic resins. This product is also a useful reactive diluent in 2K adhesives and coatings. 收起 | |
| Bisomer® CL HEMA | GEO Specialty Chemicals, Inc.TRIMET Products Group | Bisomer® CL HEMA (Hydroxyethyl Methacrylate) is widely used in the preparation of long-term wear or disposable contact lenses, intra-ocular lenses and diverse biomedical applications. It is an ideal starting point in the formulation of biomedical hydrogel...展開 Bisomer® CL HEMA (Hydroxyethyl Methacrylate) is widely used in the preparation of long-term wear or disposable contact lenses, intra-ocular lenses and diverse biomedical applications. It is an ideal starting point in the formulation of biomedical hydrogels. 收起 | |
| Bisomer® HEMA HP | GEO Specialty Chemicals, Inc.TRIMET Products Group | Bisomer® HEMA HP (Hydroxyethyl Methacrylate) is widely used in the preparation of long-term wear or disposable contact lenses, intra-ocular lenses and diverse biomedical applications. It is an ideal starting point in the formulation of biomedical hydrogel...展開 Bisomer® HEMA HP (Hydroxyethyl Methacrylate) is widely used in the preparation of long-term wear or disposable contact lenses, intra-ocular lenses and diverse biomedical applications. It is an ideal starting point in the formulation of biomedical hydrogels. 收起 | |
| Bisomer® LMA | GEO Specialty Chemicals, Inc.TRIMET Products Group | 憎水性單官能團甲基丙烯酸酯單體，具有低玻璃化轉變溫度（Tg），具有出色的柔韌性和增塑性 | |
| Bisomer® LMA 97SP | GEO Specialty Chemicals, Inc.TRIMET Products Group | Bisomer® LMA 97SP 是一款疏水，低玻璃態轉化溫度(Tg)的單功能丙烯酸甲酯單體。作為聚合型塑化劑使用時，展現出很好的可塑性。使用Bisomer® LMA 97SP的配方可以減少不同批次產品在粘度、顏料潤濕性、抗化學品性、附著力、硬度、剪切強度、粘性等性能上的差異性。 該產品是合成應用於工業塗料、印刷油墨、壓敏膠等領域的高質量丙烯酸樹脂的核心原料。 | |
| Bisomer® PEA 6 | GEO Specialty Chemicals, Inc.TRIMET Products Group | 特殊聚合物單體。是水溶性的，並提供了一種創新的途徑用於生產傳統和水性UV固化氨基甲酸酯丙烯酸酯齊聚物。作為HEA和HPA的替代物，它無毒、易於處理，列於歐洲現有商業化學品目錄（EINECS）的聚合物分類 | |
| Bisomer® PPA 6 | GEO Specialty Chemicals, Inc.TRIMET Products Group | 為制備UV固化氨基甲酸酯丙烯酸酯齊聚物提供了一種非常規的途徑。它是用於基於氨基甲酸酯丙烯酸酯和乙烯基酯（環氧乙烯基酯）UV體系的出色的低收縮反應性稀釋劑 | |
| DMPA® Dimethylolpropionic Acid | GEO Specialty Chemicals, Inc.TRIMET Products Group | 產品技術指導 - 一種獨特和多用途的位阻二醇分子，具羥基和羧基官能性。 | |
| DMPA® Polyol HA-0135 | GEO Specialty Chemicals, Inc.TRIMET Products Group | 是一種DMPA CHDA BDO己二酸聚酯樹脂，98%不揮發組分。它可作為水性體系的酸官能團來源和作為共樹脂改進顏料的潤濕、分散和穩定。 | |
| DMPA® Polyol HA-0135LV2 | GEO Specialty Chemicals, Inc.TRIMET Products Group | DMPA® Polyol HA-0135LV2是一種同時帶酸和羥基官能團的低結晶聚酯多醇。類似DMPA® Polyol HA-0135，該樹脂可消除在聚氨酯乳液生產過程中NMP作為加工溶劑的需球 | |
| TRI-REZ® Polyol 1030-60 Polyester Resin | GEO Specialty Chemicals, Inc.TRIMET Products Group | Tri-Rez 1030-60是一款非結晶、低黏度飽和線性聚脂多元醇，專門為聚氨酯基涂料、膠粘劑和泡沫配方體系設計。其疏水彈性結構，使其成為配制高固體份水基聚氨酯樹脂的理想多元醇。 | |
| TRI-REZ® Polyol 1030-90 Polyester Resin | GEO Specialty Chemicals, Inc.TRIMET Products Group | Tri-Rez 1030-90 是一款非結晶、低黏度飽和線性聚脂多元醇，專門為聚氨酯基涂料、膠粘劑和泡沫配方體系設計。其疏水彈性結構，使其成為配制高固體份水基聚氨酯樹脂的理想多元醇。 | |
| TRI-REZ® Polyol 1220A-300 Polyester Resin | GEO Specialty Chemicals, Inc.TRIMET Products Group | TRI-REZ® Polyol 1220A-300 is a 100% solids highly branched saturated polyester polyol based on TRIMET® TME (Trimethylolethane). The highly branched structure of TRI-REZ® Polyol 1220A-300 makes it an ideal choice for formulating two component, high solids ...展開 TRI-REZ® Polyol 1220A-300 is a 100% solids highly branched saturated polyester polyol based on TRIMET® TME (Trimethylolethane). The highly branched structure of TRI-REZ® Polyol 1220A-300 makes it an ideal choice for formulating two component, high solids polyurethane coatings and elastomers that require excellent UV and chemical resistance properties. 收起 | |
| TRI-REZ® Polyol 1230-60 Polyester Resin | GEO Specialty Chemicals, Inc.TRIMET Products Group | Tri-Rez 1230-60 是一款非晶狀飽和線性聚脂多元醇，專門為聚氨酯體系涂料、膠粘劑和泡沫設計。其疏水彈性結構使其成為配制高固體份水基聚氨酯樹脂的理想多元醇。 | |
| TRI-REZ® Polyol 1230-90 Polyester Resin | GEO Specialty Chemicals, Inc.TRIMET Products Group | Tri-Rez 1230-90 是一款非低黏度飽和線性聚脂多元醇，專門為聚氨酯體系涂料、膠粘劑和泡沫設計。其疏水彈性結構使其成為配制高固體份水基聚氨酯樹脂的理想多元醇。 | |
| Abrasion Scrub Tester | BYK-Gardner USA | Coated surfaces need to be tested for resistance to abrasion caused by a brush, sponge, or other means. The Wet Abrasion Tester produces a repeatable, controlled condition to simulate everyday use or wear patterns. |  |
| Auto-Chart Metallic Color | BYK-Gardner USA | Color and Appearance data in one QC management system. All critical color and appeaance parameters can be saved and analyzed with one software package, smart-chart. | |
| Auto-Chart Orange Peel/DOI | BYK-Gardner USA | Auto-Chart Orange Peel/DOI provides color and appearance data in one QC management system. All critical color and appearance parameters can be saved and analyzed with one software package, smart-chart. | |
| Auto-Match® III Sensor | BYK-Gardner USA | The last thing a paint department wants to worry about is a broken down color matching system. Therefore the Auto-Match® III Sensor has an extremely rugged and reliable design guaranteeing a maintenance-free operation for years. |  |
| Auto-Match Software | BYK-Gardner USA | BYK-Gardner's software combines proven reliability with excellent matching performance. The user friendly interface guarantees ease of operation: just choose the product line that you want to use and the software guides you through the process. | |
| Auto-QC | BYK-Gardner USA | Color Control Software: BYK-Gardner offers two levels of color control software for recording, analyzing and documenting color measurement results in the laboratory and production; auto-QC lite for basic QC requirements; auto-QC with advanced features. |  |
| Balanced Beam Scrape Adhesion And Mar Tester | BYK-Gardner USA | Balanced Beam Scrape Adhesion And Mar Tester is used to perform scrape adhesion and mar resistance (scratch hardness) tests of coatings and surfaces of various materials. |  |
| Bubble Viscometers | BYK-Gardner USA | BYK-Gardner bubble viscometers are used to quickly determine kinematic viscosity of known liquids such as resins and varnishes. |  |
| Buchholz Indentation Test | BYK-Gardner USA | The Buchholz indentation test is a reliable test method for evaluation of indentation resistance of plastic deformable coatings. |  |
| BYK LC 4 | BYK-Gardner USA | Conductivity meters for water based coatings systems. LC 4 handheld conductivity meter with touch-screen, easy to-use, rugged design. |  |
| BYK-mac | BYK-Gardner USA | Total color impression of effect finishes: The appearance of effect finishes is influenced by different viewing angles and viewing conditions. Apart from a light-dark flop and color shift special sparkling effects can be created. The BYK-mac spectrophoto...展開 Total color impression of effect finishes: The appearance of effect finishes is influenced by different viewing angles and viewing conditions. Apart from a light-dark flop and color shift special sparkling effects can be created. The BYK-mac spectrophotometer is unique as it measures both multiangle color and flake characterization in one portable device. 收起 |  |
| BYK-mac COLOR | BYK-Gardner USA | Multi-angle color measurement: In order to control the lightness and / or color flop of an effect finish, the color needs to be measured under different viewing angles. BYK-mac COLOR spectrophotometer offers an attractive solution. |  |
| BYK-mac ROBOTIC | BYK-Gardner USA | BYK-mac ROBOTIC allows automated total color control as it is mounted on a robotic arm. Products can only be manufactured with uniform and consistent quality when process stability is guaranteed. Therefore, multi-angle color, sparkle, and graininess must ...展開 BYK-mac ROBOTIC allows automated total color control as it is mounted on a robotic arm. Products can only be manufactured with uniform and consistent quality when process stability is guaranteed. Therefore, multi-angle color, sparkle, and graininess must be measured on a routine basis. The robotic system not only measures a high number of cars, but also on the same areas. 收起 |  |
| BYK-mac Small Aperture | BYK-Gardner USA | Special effect finishes are used in many applications to create new color impressions emphasizing the design of a product. Objects like mobile phone housings, bicycles or window handles are very small or curved. They require a color instrument with small ...展開 Special effect finishes are used in many applications to create new color impressions emphasizing the design of a product. Objects like mobile phone housings, bicycles or window handles are very small or curved. They require a color instrument with small aperture and repeatable sample placement. The BYK-mac with 12 mm aperture guarantees repeatable results even on such products. 收起 |  |
| BYKO-Charts | BYK-Gardner USA | BYK-Gardner offers a wide range of drawdown cards and charts for virtually any application and coating material. Test charts are easy to use and an inexpensive substrate to test a variety of coating properties, such as opacity, spreading rate, penetrat...展開 BYK-Gardner offers a wide range of drawdown cards and charts for virtually any application and coating material. Test charts are easy to use and an inexpensive substrate to test a variety of coating properties, such as opacity, spreading rate, penetration behavior, and flow and leveling behavior. They are used for testing architectural, industrial, automotive, wood finishes or even cosmetic products (e.g. nail polish). 收起 |  |
| BYKO-Cut Universal | BYK-Gardner USA | BYKO-Cut Universal is a portable instrument providing sufficient accuracy for laboratory use but also usable at construction sites and in workshops. It is ideal for customer service technicians and demonstrations. This is a universal instrument for measur...展開 BYKO-Cut Universal is a portable instrument providing sufficient accuracy for laboratory use but also usable at construction sites and in workshops. It is ideal for customer service technicians and demonstrations. This is a universal instrument for measuring film thickness in the range of 2-2000 μm, adhesion test by means of cross-cut test, indentation hardness, and microscopic research for pores, pits, cracks, blisters, flaking, intercoat adhesion of the individual film in coat systems, and quality control of the pretreatment of the substrate. 收起 |  |
| BYKO-Spectra | BYK-Gardner USA | Colors appear differently under different lighting conditions. Use of a light booth to simulate different lighting conditions helps to obtain objective color assessment, improves communication and reduces product rejections. BYK-Gardner offers a complete ...展開 Colors appear differently under different lighting conditions. Use of a light booth to simulate different lighting conditions helps to obtain objective color assessment, improves communication and reduces product rejections. BYK-Gardner offers a complete line of light booths which allow you to see what your product will look like – independent of location and environmental influences. For critical color evaluation, the BYKO-Spectra light booth offers every option and feature that is needed to evaluate and communicate color with absolute confidence. 收起 |  |
| BYKO-Spectra Basic | BYK-Gardner USA | For general color evaluation under defined lighting conditions, the BYKO-Spectra Basic light booth offers several benefits. It allows for the comparison of standard and sample in a color-neutral environment, and offers three different controlled light sou...展開 For general color evaluation under defined lighting conditions, the BYKO-Spectra Basic light booth offers several benefits. It allows for the comparison of standard and sample in a color-neutral environment, and offers three different controlled light sources: daylight, incandescent light, and department store light. It is easy to operated by using individual switches for each light source, can be set up in minutes without any tools, and allows for economical testing of large samples in a compact design - for laboratory and production. 收起 |  |
| BYKO-Spectra Effect | BYK-Gardner USA | Effect finish appearance is influenced by different viewing angles and viewing conditions. With BYK-Gardner’s new BYKO-Spectra Effect light booth, it is now possible to control both parameters to ensure objective evaluation of the total color impression o...展開 Effect finish appearance is influenced by different viewing angles and viewing conditions. With BYK-Gardner’s new BYKO-Spectra Effect light booth, it is now possible to control both parameters to ensure objective evaluation of the total color impression of effect finishes. This helps to improve communication and reduce product rejections. 收起 |  |
| BYKO-Spectra Mini | BYK-Gardner USA | For general color evaluation of small samples the BYKO-Spectra Mini light booth offers several benefits. It allows for comparison of standard and sample in a color-neutral environment, and three different controlled light sources: daylight, incandescent l...展開 For general color evaluation of small samples the BYKO-Spectra Mini light booth offers several benefits. It allows for comparison of standard and sample in a color-neutral environment, and three different controlled light sources: daylight, incandescent light, and department store light. It is easy to operate, has a quick set up, and allows for economical testing of small samples due to its compact design. 收起 |  |
| BYKO-test 4200/4500 | BYK-Gardner USA | The byko-test 4500 film thickness gauge allows for the measurement of a variety of products. No cable exchange or calibration is needed when changing from a ferrous to a non-ferrous substrate. The large LCD display and 10 second retention of the last meas...展開 The byko-test 4500 film thickness gauge allows for the measurement of a variety of products. No cable exchange or calibration is needed when changing from a ferrous to a non-ferrous substrate. The large LCD display and 10 second retention of the last measured value makes the byko-test 4500 easy to use. 收起 |  |
| BYKO-test 8500 | BYK-Gardner USA | The byko-test 8500 film thickness gauge has a modular design to accommodate a wide range of applications. Multiple sensor probes are available for maximun flexibility. Coating thickness can be measured on a wide variety of metal substrates: iron, steel, c...展開 The byko-test 8500 film thickness gauge has a modular design to accommodate a wide range of applications. Multiple sensor probes are available for maximun flexibility. Coating thickness can be measured on a wide variety of metal substrates: iron, steel, copper, aluminum, zinc, brass, and titanium. 收起 |  |
| BYKO-test MP0R | BYK-Gardner USA | The byko-test MP0R film gage allows quick and easy measurements of coatings thickness on ferrous and non-ferrous substrates. The instrument automatically identifies the kind of substrate and selects the appropriate test method accordingly. The instrument...展開 The byko-test MP0R film gage allows quick and easy measurements of coatings thickness on ferrous and non-ferrous substrates. The instrument automatically identifies the kind of substrate and selects the appropriate test method accordingly. The instrument is designed for one-hand operation. An integrated spring guarantees a constant pressure of the probe to the sample's surface. The instrument comes with an integrated radio transmitter. For wireless transmission of the measured values directly to a PC, the optional radio receiver and software is necessary. 收起 |  |
| CAPCALC 32 | BYK-Gardner USA | Software for CAP 2000+: Turn your CAP2000+ Viscometer into a sensitive, accurate rheometer. When advanced sample analysis is required, CAPCALC can control the viscometer from any PC to provide automatic data capture and graphical display to facilitate a...展開 Software for CAP 2000+: Turn your CAP2000+ Viscometer into a sensitive, accurate rheometer. When advanced sample analysis is required, CAPCALC can control the viscometer from any PC to provide automatic data capture and graphical display to facilitate analysis of test samples. 收起 | |
| Cloud-Runner | BYK-Gardner USA | Control and guarantee a uniform finish - no more mottling! Mottling disturbes the overall color harmony of effect finishes. These irregular lightness variations can now be objectively measured with BYK-Gardner's newest innovation: the cloud-runner simulat...展開 Control and guarantee a uniform finish - no more mottling! Mottling disturbes the overall color harmony of effect finishes. These irregular lightness variations can now be objectively measured with BYK-Gardner's newest innovation: the cloud-runner simulates visual evaluation under different observing angles and characterizes clouds / mottles by their size and visibility. 收起 |  |
| Color-Guide | BYK-Gardner USA | Keyboards, pens and window handles require a color instrument with a very small aperture and a repeatable sample placement. Color-Guide 45/0, 4 mm aperture together with the optional sample holder guarantee repeatable results and a convenient sample place...展開 Keyboards, pens and window handles require a color instrument with a very small aperture and a repeatable sample placement. Color-Guide 45/0, 4 mm aperture together with the optional sample holder guarantee repeatable results and a convenient sample placement. 收起 |  |
| Color-Guide Plus | BYK-Gardner USA | Color-Guide Plus - the Electronic Fandeck! Instead of spending hours searching through hundreds of fandeck colors trying to match your customer's sample, why not get your answer in less than a second with the color-guide plus? |  |
| Color-View | BYK-Gardner USA | The Color-View spectrophotometer is a highly reliable 45/0 instrument with circumferential illumination. It is designed to measure rough, directional surfaces, pellets or powdered materials like plastic concentrates and resins, and smooth uniform surfaces...展開 The Color-View spectrophotometer is a highly reliable 45/0 instrument with circumferential illumination. It is designed to measure rough, directional surfaces, pellets or powdered materials like plastic concentrates and resins, and smooth uniform surfaces like paint drawdowns and sprayouts, all with the same degree of certainty. 收起 |  |
| Cone and Plate Viscometer | BYK-Gardner USA | The versatility of the CAP 1000+ and CAP 2000+ makes these instruments a practical tool for any QC or R&D lab requiring quick and easy testing of materials, regardless of application, at high shear rates. |  |
| Conical Mandrel Tester | BYK-Gardner USA | Bending coated sheet metal over a defined radius is an indicator of the elongation and adhesion of a paint film at bending stress. BYK-Gardner offers two types of mandrel bending testers – a cylindrical mandrel and a conical mandrel. |  |
| "Coverall" Bend And Impact Tester | BYK-Gardner USA | "Coverall" Bend And Impact Tester is used to test both flexibility and impact resistance. By simply reversing the impacter, the instrument can evaluate the flexibility of can-stock coating during double seaming and to test its impact resistance in handlin...展開 "Coverall" Bend And Impact Tester is used to test both flexibility and impact resistance. By simply reversing the impacter, the instrument can evaluate the flexibility of can-stock coating during double seaming and to test its impact resistance in handling. 收起 |  |
| Cross-Cut Tester Kit | BYK-Gardner USA | Cross-Cut Tester Kits are available in 2 different blade versions, one is a multi-cut blade with 6 cutting edges, the other version has one cutting edge. The Cross-Cut Tester blades are made of hardened steel alloy. The blades are designed for retaining a...展開 Cross-Cut Tester Kits are available in 2 different blade versions, one is a multi-cut blade with 6 cutting edges, the other version has one cutting edge. The Cross-Cut Tester blades are made of hardened steel alloy. The blades are designed for retaining a sharp cutting edge and reduce the frequency of blade replacement. 收起 |  |
| Cupping Tester | BYK-Gardner USA | The BYK-Gardner cupping tester has been designed for determining the elongation and deformability of single- and multiple-layer systems on metal substrates. It has an electrohydraulic drive for highly reproducible results, an easy-to-use eccentric clampin...展開 The BYK-Gardner cupping tester has been designed for determining the elongation and deformability of single- and multiple-layer systems on metal substrates. It has an electrohydraulic drive for highly reproducible results, an easy-to-use eccentric clamping ring, and the C-opening accepts large and small test panels. 收起 |  |
| Cylindrical Mandrel Tester | BYK-Gardner USA | Bending coated sheet metal over a defined radius is an indicator of the elongation and adhesion of a paint film at bending stress. BYK-Gardner offers two types of mandrel bending testers – a cylindrical mandrel and a conical mandrel. |  |
| Delta Color Comparator | BYK-Gardner USA | The BYK-Gardner Delta Color Comparator uses precision polished opticalglass filters as reference standards. Two different models are available: with or without illumination. The rugged design of this instrument allows the color comparator to be used at a...展開 The BYK-Gardner Delta Color Comparator uses precision polished opticalglass filters as reference standards. Two different models are available: with or without illumination. The rugged design of this instrument allows the color comparator to be used at any location, and easy operation allows anyone to determine Gardner Color Numbers. The optional illuminator allows back-light color to improve viewing conditions. 收起 |  |
| Density Cups | BYK-Gardner USA | BYK-Gardner Density Cups use a cylindrical shape which provides a large opening for easy filling, emptying, and cleaning. The tightly fitted stainless steel covers have an upward slope to a small hole in the center to allow excess sample material to be ex...展開 BYK-Gardner Density Cups use a cylindrical shape which provides a large opening for easy filling, emptying, and cleaning. The tightly fitted stainless steel covers have an upward slope to a small hole in the center to allow excess sample material to be expelled without entrapping air bubbles, which increases accuracy. 收起 |  |
| Digital KU-2 | BYK-Gardner USA | The Digital KU-2 viscometer provides a direct digital reading in Krebs units (KU), centipoise, and grams (gm). This simplifies an established test procedure providing an immediate calculation of the viscosity value. The viscometer automatically starts or ...展開 The Digital KU-2 viscometer provides a direct digital reading in Krebs units (KU), centipoise, and grams (gm). This simplifies an established test procedure providing an immediate calculation of the viscosity value. The viscometer automatically starts or stops by lowering or raising the viscometer. The KU-2 automatically establishes the correct rotational speed to comply with ASTM method D 562. 收起 |  |
| DPM 100 | BYK-Gardner USA | The DPM 100 Digital Pocket Microscope offers varying magnification up to 200x suitable for most quality inspection work. The microscope features integrated LED illumination which can be turned on and off depending on the application. The DPM contains a hi...展開 The DPM 100 Digital Pocket Microscope offers varying magnification up to 200x suitable for most quality inspection work. The microscope features integrated LED illumination which can be turned on and off depending on the application. The DPM contains a high-resolution color camera which provides crisp, clear images. To capture an image simply press the red button on the microscope. The microscope can be used for many applications, such as print quality, paper structure, coatings, textiles, and plastics. 收起 |  |
| Drying Time Recorder | BYK-Gardner USA | BYK-Gardner offers the versatile BK Drying Time Recorder to help quantify the various stages of film curing and drying, deliver reproducible results, and guarantee highest efficiency. The various stages of drying and curing that occur in films are easy t...展開 BYK-Gardner offers the versatile BK Drying Time Recorder to help quantify the various stages of film curing and drying, deliver reproducible results, and guarantee highest efficiency. The various stages of drying and curing that occur in films are easy to detect but difficult to define in terms of chemical and physical principles. In order to evaluate them objectively it is necessary to use instrumentation under controlled conditions. 收起 |  |
| DUR-O-TEST | BYK-Gardner USA | This pocket instrument allows hardness tests on flat and curved surfaces. The instrument consists of a sleeve with a pressure spring that can be bent to various tensions by using a slide. The spring acts on a tungsten carbide needle with its tip extending...展開 This pocket instrument allows hardness tests on flat and curved surfaces. The instrument consists of a sleeve with a pressure spring that can be bent to various tensions by using a slide. The spring acts on a tungsten carbide needle with its tip extending out of the sleeve. A locking screw fixes the slide, thus maintaining constant spring tension. 收起 |  |
| DV-E Rotational Viscometer | BYK-Gardner USA | DV-E Rotational Viscometer has simplified controls, which allow operators to change test parameters quickly with the push of a switch and turn of a knob. The digital display ensures easy and accurate readout of results for simultaneous measurements of vis...展開 DV-E Rotational Viscometer has simplified controls, which allow operators to change test parameters quickly with the push of a switch and turn of a knob. The digital display ensures easy and accurate readout of results for simultaneous measurements of viscosity and torque. 收起 |  |
| Easy-Link | BYK-Gardner USA | Easy-Link is a software that helps document measurement results. It offers easy and direct data transfer from the instrument to Excel®, and QC templates prepared in Excel® allow you to create professional QC reports. All the data is summarized in one easy...展開 Easy-Link is a software that helps document measurement results. It offers easy and direct data transfer from the instrument to Excel®, and QC templates prepared in Excel® allow you to create professional QC reports. All the data is summarized in one easy-to-read report: gloss, thickness, color, and specific product information. In addition, the software is expandable, so modification can be made easily when new requirements are established. 收起 |  |
| Fineness Of Grind Gages | BYK-Gardner USA | The Fineness of Grind Gage is used to indicate the fineness of grind or the presence of coarse particles or agglomerates in a dispersion. It does not determine particle size or particle size distribution. Grind gages are used in controlling the production...展開 The Fineness of Grind Gage is used to indicate the fineness of grind or the presence of coarse particles or agglomerates in a dispersion. It does not determine particle size or particle size distribution. Grind gages are used in controlling the production, storage, and application of dispersion products produced by milling in the paint, plastic, pigment, printing ink, paper, ceramic, pharmaceutical, food, and many other industries. 收起 |  |
| Gardner Impact Tester Automatic Lift System | BYK-Gardner USA | Gardner Impact Tester Automatic Lift System features a pneumatically powered system added to the standard manual Gardner impact tester to relieve the operator of repetitive lifting of the drop weight and improve the repeatability of the test. This system ...展開 Gardner Impact Tester Automatic Lift System features a pneumatically powered system added to the standard manual Gardner impact tester to relieve the operator of repetitive lifting of the drop weight and improve the repeatability of the test. This system is especially helpful where large 8 and 16 pound weights are used. By using a mechanical stop, the test is made more repeatable by eliminating any variation in the drop point by individuals releasing the weight by eye. 收起 |  |
| Gradient-Oven | BYK-Gardner USA | The Gradient-Oven is a test apparatus for evaluating the baking and drying behavior of liquid coatings, powder coatings, resins, and plastics. A production baking process can be simulated by programming heat-up speed, baking temperature and time. This ins...展開 The Gradient-Oven is a test apparatus for evaluating the baking and drying behavior of liquid coatings, powder coatings, resins, and plastics. A production baking process can be simulated by programming heat-up speed, baking temperature and time. This instrument saves time and energy, generates various curing temperatures on one panel, and simulates the temperature profile of a production oven in the laboratory. 收起 |  |
| Haze-Gard Dual | BYK-Gardner USA | The Haze-Gard Dual objectively measures Total Transmittance and Transmission Haze according to two international specifications: ISO 13468 Compensation method and ASTM D1003 Noncompensated method. This instrument offers fast measurement of a variety of sa...展開 The Haze-Gard Dual objectively measures Total Transmittance and Transmission Haze according to two international specifications: ISO 13468 Compensation method and ASTM D1003 Noncompensated method. This instrument offers fast measurement of a variety of samples and precise and reliable readings. 收起 |  |
| Haze-Gard Plus | BYK-Gardner USA | The Haze-Gard Plus quantifies the visual perception with objective measurement data. All essential criteria for transparency can be measured with one instrument: Total transmittance, Transmission haze, and See-through quality. |  |
| Haze-Gloss | BYK-Gardner USA | The haze meter was designed for the needs in the laboratory. Gloss, haze and mirror reflection can all be measured with one instrument for low to high gloss surfaces. It has a mirror reflection for materials with very high reflection capabilities, such as...展開 The haze meter was designed for the needs in the laboratory. Gloss, haze and mirror reflection can all be measured with one instrument for low to high gloss surfaces. It has a mirror reflection for materials with very high reflection capabilities, such as metals. This instrument also has a reference beam, closed optics, and a self diagnosis guarantee for accurate quality control. 收起 |  |
| Heavy-Duty Impact Tester | BYK-Gardner USA | This impact tester has gained wide acceptance in testing the impact resistance of many types of coatings from paints to varnishes to tough plated, plastic or laminated coatings. It is also widely used to establish quality control standards for resistance ...展開 This impact tester has gained wide acceptance in testing the impact resistance of many types of coatings from paints to varnishes to tough plated, plastic or laminated coatings. It is also widely used to establish quality control standards for resistance to impact surface damage and penetration of many construction materials including plastics, resins, fiberglass, sheet metals, and plywood. 收起 |  |
| HeliPath Stand | BYK-Gardner USA | The Helipath stand is designed to lower and raise the viscometer so that its rotating shearing element will describe a helical path through the test sample. By always cutting into fresh material the problem of separating is eliminated. The reversing featu...展開 The Helipath stand is designed to lower and raise the viscometer so that its rotating shearing element will describe a helical path through the test sample. By always cutting into fresh material the problem of separating is eliminated. The reversing feature of the Helipath stand allows measurements to be made over a period of time. 收起 |  |
| Hoffman Scratch Hardness Tester | BYK-Gardner USA | The Hoffman Scratch Hardess Tester was developed for the comparative evaluation of scratch resistance and adhesion of many types of coatings. This instrument consists of a four-wheeled carriage, a scale arm graduated from 0-20 that is attached permanentl...展開 The Hoffman Scratch Hardess Tester was developed for the comparative evaluation of scratch resistance and adhesion of many types of coatings. This instrument consists of a four-wheeled carriage, a scale arm graduated from 0-20 that is attached permanently to the carriage in a counterpoised condition about the pivot axis, and a scratch tool with a sharp circular rim mounted at 45° to the flat test surface. 收起 |  |
| ISO Impact Tester | BYK-Gardner USA | ISO Impact Tester is used for testing impact resistance of coatings on metal substrates. In accordance with ISO standard, the test panel is fixed on the die using a clamping device, so that the panel surface outside the test area is not affected by the ra...展開 ISO Impact Tester is used for testing impact resistance of coatings on metal substrates. In accordance with ISO standard, the test panel is fixed on the die using a clamping device, so that the panel surface outside the test area is not affected by the rapid deformation caused by the falling weight. This instrument features an anodized guide tube with a scale in inches and mm, tolerance for ISO falling weights +/- 1g, and a maximum falling weight of 2 kg. It also has exchangeable falling weights and dies and can be easily converted for testing in accordance with ASTM. 收起 |  |
| LCM III | BYK-Gardner USA | The LCM III is a reliable color instrument which replaces conventional visual color evaluation with an objective measurement. It is ideal for routine production control of clear, transparent liquids like resins, adhesives and solvents. This instrument fea...展開 The LCM III is a reliable color instrument which replaces conventional visual color evaluation with an objective measurement. It is ideal for routine production control of clear, transparent liquids like resins, adhesives and solvents. This instrument features a large touch-screen display with intuitive user guidance for simple operation and automatic cuvette recognition, which helps avoid faulty data measurement. 收起 |  |
| LCS III | BYK-Gardner USA | The LCS III is a highly precise color instrument which spectrally measures all color shades of optically clear liquids. Besides the conventional visual color numbers (Gardner, Iodine, Hazen (APHA) etc.) the LCS can measure opponent color such as CIELab,...展開 The LCS III is a highly precise color instrument which spectrally measures all color shades of optically clear liquids. Besides the conventional visual color numbers (Gardner, Iodine, Hazen (APHA) etc.) the LCS can measure opponent color such as CIELab, XYZ and Yxy under the conditions of illumiant C (daylight) and 2° Standard Observer. 收起 |  |
| Light-Duty Impact Tester | BYK-Gardner USA | The Light-Duty Impact Tester should be used with materials that can be damaged or penetrated by small impact forces such as products mildly abused in households, offices or labs through years of normal use. It measures impact resistance of plastics and ot...展開 The Light-Duty Impact Tester should be used with materials that can be damaged or penetrated by small impact forces such as products mildly abused in households, offices or labs through years of normal use. It measures impact resistance of plastics and other materials. 收起 |  |
| Liquid Color Standards | BYK-Gardner USA | The BYK-Gardner Liquid Color Standard Comparator provides the entire BYK-Gardner Color Scale, against which a liquid sample can be visually compared. It has a rugged design for use in the laboratory and production, and offers quick and easy color quality ...展開 The BYK-Gardner Liquid Color Standard Comparator provides the entire BYK-Gardner Color Scale, against which a liquid sample can be visually compared. It has a rugged design for use in the laboratory and production, and offers quick and easy color quality control of liquids. 收起 |  |
| Mechanical Cupping Tester | BYK-Gardner USA | The BYK-Gardner Mechanical Cupping Tester is designed to test the elongation and deformability of lacquers and protective coatings applied to metal substrates. The punch is applied under pressure to the uncoated side of the test panel. The panel is held i...展開 The BYK-Gardner Mechanical Cupping Tester is designed to test the elongation and deformability of lacquers and protective coatings applied to metal substrates. The punch is applied under pressure to the uncoated side of the test panel. The panel is held in place by a clamping ring. Two test procedures can be performed the "Predetermined depth" (go/no go) or "Minimum depth required to cause failure". 收起 |  |
| Micro-Gloss | BYK-Gardner USA | The Micro-Gloss has been the unsurpassed industry standard in gloss measurement for many years. It is the only gloss meter combining highest accuracy, ease of use and multiple functionality - essential for today's testing requirements. |  |
| Micro-Gloss Accessories | BYK-Gardner USA | This is a collection of accessories for the micro-gloss product line. It includes a replacement holder with high gloss calibration tile and a checking standard. In order to control the performance and linearity of the glossmeter it is recommended to use a...展開 This is a collection of accessories for the micro-gloss product line. It includes a replacement holder with high gloss calibration tile and a checking standard. In order to control the performance and linearity of the glossmeter it is recommended to use a checking standard periodically. The control interval is dependent on the usage conditions of the glossmeter. 收起 | |
| Micro-Haze Plus | BYK-Gardner USA | The Micro-Haze Plus measures gloss and haze in one measurement procedure. This handy hazemeter is the ideal solution for measurement on finished products, for quality control in the production line and for technical service at the customer site. |  |
| Micro-Tri-Gloss | BYK-Gardner USA | Micro-Tri-Gloss combines 20°, 60°, 85° in one glossmeter - as handy as the one angle unit. Having three geometries in one unit allows you to be in compliance with international standards and to quickly recognize quality variations. |  |
| Micro-TRI-Gloss μ | BYK-Gardner USA | The micro-TRI-gloss µ measures both in seconds and at the same position. This saves time and is ideal for checks in the field. It simultaneously displays 20°, 60°, and 85° for high gloss to matte coatings. It has an automatic check of glossmeter calibrati...展開 The micro-TRI-gloss µ measures both in seconds and at the same position. This saves time and is ideal for checks in the field. It simultaneously displays 20°, 60°, and 85° for high gloss to matte coatings. It has an automatic check of glossmeter calibration standard and an easy, multilingual menu operation with scroll wheel. This instrument also has memory for 999 readings with name input and includes easy-link software for professional documentation in Excel®. 收起 |  |
| Micro-Wave-Scan | BYK-Gardner USA | Micro-Wave-Scan is used for Orange Peel and DOI measurement. Now you can measure Orange Peel and DOI on small and curved surfaces such as automotive add-on parts like bumpers, gas tank doors, mirror housings, door handles, decorative trim or motorcycle pa...展開 Micro-Wave-Scan is used for Orange Peel and DOI measurement. Now you can measure Orange Peel and DOI on small and curved surfaces such as automotive add-on parts like bumpers, gas tank doors, mirror housings, door handles, decorative trim or motorcycle parts. 收起 |  |
| Pencil Hardness Tester | BYK-Gardner USA | Pencil Hardness Tester is used to determine the resistance of coating materials or lacquers to scratch effects on the surface. This test is of particular value for furniture or vehicle lacquers, but is also a useful aid in the development of synthetic ...展開 Pencil Hardness Tester is used to determine the resistance of coating materials or lacquers to scratch effects on the surface. This test is of particular value for furniture or vehicle lacquers, but is also a useful aid in the development of synthetic resins or other film forming materials. Generally, scratch hardness is measured by moving a sharp object under a known pressure over the test surface. The result may either be the value of the pressure required to scratch through the test material if a scratching tool of constant hardness is used, or the hardness of the scratching tool is varied while constant pressure is applied. 收起 |  |
| Pendulum Hardness Tester | BYK-Gardner USA | The Pendulum Hardness Tester is a laboratory measuring instrument for hardness measurements in accordance with the König and Persoz methods. It has an automatic counter with acoustic signal when the deflection is below 3° (König) or 4° (Persoz) respective...展開 The Pendulum Hardness Tester is a laboratory measuring instrument for hardness measurements in accordance with the König and Persoz methods. It has an automatic counter with acoustic signal when the deflection is below 3° (König) or 4° (Persoz) respectively. This instrument also offers a digital counter and a selector switch for display in seconds or number of oscillations. 收起 |  |
| Permeability Cups | BYK-Gardner USA | The BYK-Gardner Permeability Cup is a shallow cylinder with a threaded flange, flat retaining washer and threaded ring cover. Rubber gaskets are used to tightly seal the specimen between the cup and the ring cover. The cup and cover are knurled for easier...展開 The BYK-Gardner Permeability Cup is a shallow cylinder with a threaded flange, flat retaining washer and threaded ring cover. Rubber gaskets are used to tightly seal the specimen between the cup and the ring cover. The cup and cover are knurled for easier handling. 收起 |  |
| PosiTector DPM | BYK-Gardner USA | PosiTector DPM is used to measure and record climatic parameters including air temperature, surface temperature, dew point temperature and the difference between surface and dew point temperatures, which is critial for determining condensation probabilit...展開 PosiTector DPM is used to measure and record climatic parameters including air temperature, surface temperature, dew point temperature and the difference between surface and dew point temperatures, which is critial for determining condensation probability. This meter is ideal for surface preparation, as required by ISO 8502-4. 收起 |  |
| PosiTest Family Pull-Off Adhesion Test | BYK-Gardner USA | The PosiTest pull-off adhesion testers measure paint adhesion on metal, wood and other rigid substrates. This easy-to-use, reliable and versatile instrument uses hydraulic pressure and a revolutionary self-aligning dolly to ensure uniform pull distributio...展開 The PosiTest pull-off adhesion testers measure paint adhesion on metal, wood and other rigid substrates. This easy-to-use, reliable and versatile instrument uses hydraulic pressure and a revolutionary self-aligning dolly to ensure uniform pull distribution over the surface being tested, preventing a one-sided pull-off. This is done using a ring of small ball bearings to engage the articulating dolly head. There are two models available: the model AT-A Automatic Pull-Off Adhesion Tester and Model AT manual version. 收起 |  |
| Precision Microscope | BYK-Gardner USA | This precision microscope usually is used to measure indentation length. It allows for 20x magnification and has an inclusive light source. |  |
| Rotational Viscometers | BYK-Gardner USA | Rotational Viscometers have become a standard in virtually all industries. They measure viscosity by sensing the torque required to rotate a spindle at constant speed while immersed in fluid. The torque is proportional to the viscous drag on the spindle; ...展開 Rotational Viscometers have become a standard in virtually all industries. They measure viscosity by sensing the torque required to rotate a spindle at constant speed while immersed in fluid. The torque is proportional to the viscous drag on the spindle; thus the sample viscosity. 收起 |  |
| Sample Cuvettes | BYK-Gardner USA | Square, rectangle and cylindrical cuvettes can be used for color measurement of liquids. Both precision as well as inexpensive disposable tubes are available. The precision cuvettes ensure reproducible results – even for critical solutions as clear as wat...展開 Square, rectangle and cylindrical cuvettes can be used for color measurement of liquids. Both precision as well as inexpensive disposable tubes are available. The precision cuvettes ensure reproducible results – even for critical solutions as clear as water. For daily QC disposable cuvettes save time and money. 收起 |  |
| Single Impact Tester ESP-10 | BYK-Gardner USA | Single Impact Tester ESP-10 is used to test chip resistance. Resistance to chipping of multi-coat systems is an important factor in automotive finishing. To protect auto body parts, a multi-coat system is applied for corrosion and mechanical stress. The c...展開 Single Impact Tester ESP-10 is used to test chip resistance. Resistance to chipping of multi-coat systems is an important factor in automotive finishing. To protect auto body parts, a multi-coat system is applied for corrosion and mechanical stress. The complete coating structure is decisive for its resistance to chipping. 收起 |  |
| Spectro-Guide | BYK-Gardner USA | Spectro-Guide offers total appearance control - color and gloss in one unit. The overall appearance of a product is influenced by color and gloss. The spectro-guide spectrophotometer is unique as it measures both attributes simultaneously. |  |
| SPI Modified Impact Tester | BYK-Gardner USA | SPI Modified Impact Tester was developed in cooperation with the Society of the Plastics Industry (SPI) for evaluating impact resistance of rigid sheets of PVC (30-60 mils thick) and other plastics and materials exceeding the 160 inch-pounds limit of the ...展開 SPI Modified Impact Tester was developed in cooperation with the Society of the Plastics Industry (SPI) for evaluating impact resistance of rigid sheets of PVC (30-60 mils thick) and other plastics and materials exceeding the 160 inch-pounds limit of the Heavy-Duty Impact Tester. 收起 |  |
| Temp-Chart | BYK-Gardner USA | Temp-chart is an easy-to-use software for documentation and analysis of the temperature profile. It was developed in close cooperation with leading automotive manufacturers. To analyse the curing data measured with tem-gard, temp-chart will merge the temp...展開 Temp-chart is an easy-to-use software for documentation and analysis of the temperature profile. It was developed in close cooperation with leading automotive manufacturers. To analyse the curing data measured with tem-gard, temp-chart will merge the temperature data with oven parameters and analysis criteria to generate a temperature profile. Data will be stored in a database for professional documentation and easy access. The oven process can be optimized with means of the BYK-Gardner cure index (Porsche value). 收起 |  |
| Temp-Gard | BYK-Gardner USA | Oven Temperature Recorder: The tempgard temperature recorder system measures and saves object and air temperature during the cure process. Documentation and analysis of temperature profiles is made easy with the included tempchart software: all you need ...展開 Oven Temperature Recorder: The tempgard temperature recorder system measures and saves object and air temperature during the cure process. Documentation and analysis of temperature profiles is made easy with the included tempchart software: all you need to control and optimize your baking process. 收起 |  |
| Viscosity Cups | BYK-Gardner USA | A flow cup, sometimes called an efflux cup or viscosity cup, is a simple gravity device that measures the timed flow of a known volume of liquid passing through an orifice located at the bottom of the shaped cup. |  |
| Wave-Scan Dual | BYK-Gardner USA | Orange Peel and DOI measurement on high to semi gloss surfaces. The orange peel meter scans the optical profile of high gloss surfaces using a laser light source. An additional, infrared - high energy LED allows measuring the same structure spetrum (0.1 ...展開 Orange Peel and DOI measurement on high to semi gloss surfaces. The orange peel meter scans the optical profile of high gloss surfaces using a laser light source. An additional, infrared - high energy LED allows measuring the same structure spetrum (0.1 - 30 mm) on medium gloss surfaces. 收起 |  |
| Wave-Scan II | BYK-Gardner USA | The specialist for high gloss surfaces. Surface appearance changes with the size and distinctness of structures. The wave-scan II objectively evaluates orange peel as well as brilliance of topcoat finishes. |  |
| Wave-Scan Robotic | BYK-Gardner USA | Automatic appearance control of topcoat finish at the line. A stable running process is the key for uniform and consistent quality. Therefore, orange peel and DOI need to be measured on a routine basis in the production process and the measurement results...展開 Automatic appearance control of topcoat finish at the line. A stable running process is the key for uniform and consistent quality. Therefore, orange peel and DOI need to be measured on a routine basis in the production process and the measurement results shared with addon suppliers. The new wave-scan ROBOTIC allows automated appearance control as it is mounted on a robotic arm. 收起 |  |
| Wet Film Thickness Gages | BYK-Gardner USA | Wet Film Thickness Gage is offered for measuring wet film thickness. On one hand, film thickness influences the quality of a product; on the other hand, applying too much coating can be expensive. Depending on the application method, it is advisable to me...展開 Wet Film Thickness Gage is offered for measuring wet film thickness. On one hand, film thickness influences the quality of a product; on the other hand, applying too much coating can be expensive. Depending on the application method, it is advisable to measure wet film thickness. 收起 |  |
