| PVC Paste | Beijing Entrepreneur Science &Trading Co., Ltd. | PVC Paste is the most widely raw material used in plastic production. It has good chemical stability corrosion resistance and water resistance. It can be dissolved in acetone , hydrochloric ether, ester and some alcohol . It can offer good solubility , go...展開 PVC Paste is the most widely raw material used in plastic production. It has good chemical stability corrosion resistance and water resistance. It can be dissolved in acetone , hydrochloric ether, ester and some alcohol . It can offer good solubility , good electrical insulation , thermoplasticity and membrane forming capacity. They are essential materials for preparing PVC compounds. By adding blending agents and employing different techniques, they can be made into rigid or non-rigid PVC products and are suppliable in a wide range of transparent, translucent, and opaque colours. 收起 | |
| Chlorinated PVC-YURON CPVC | Yuron New Material | Chlorinated PVC-YURON CPVC is deeply chlorinated by PVC resin through the International leading aqueous phase suspension method. It has good solubility with toluene, xylene and a variety of aromatic hydrocarbon, ketone solvents. This product also has good...展開 Chlorinated PVC-YURON CPVC is deeply chlorinated by PVC resin through the International leading aqueous phase suspension method. It has good solubility with toluene, xylene and a variety of aromatic hydrocarbon, ketone solvents. This product also has good acid and alkali resistance, weather resistance, water resistance, oil resistance, cold resistance and flame resistance. It also has good compatibility with most resins such as alkyd resin, acrylic resin, chlorinated rubber resin and high chlorinated polyethylene resin. 收起 | |
| BLUESIL SLT 10B PVC WHITE | Elkem Silicones | BLUESIL SLT 10B is a one component, odourless, ready-to-use, neutral silicone elastomer (alcoxy type) intended to produce sealing and bonding joints. It cures at room temperature in the presence of air moisture to give a flexible and strong seal with low ...展開 BLUESIL SLT 10B is a one component, odourless, ready-to-use, neutral silicone elastomer (alcoxy type) intended to produce sealing and bonding joints. It cures at room temperature in the presence of air moisture to give a flexible and strong seal with low modulus of elasticity. 收起 | |
| BLUESIL SLT 10T PVC WHITE | Elkem Silicones | BLUESIL SLT 10T is a one-component, odourless, ready-to-use neutral silicone elastomer (alcoxy type) intended to produce sealing and bonding joints. It cures at room temperature in the presence of air moisture to give a flexible and strong seal with low m...展開 BLUESIL SLT 10T is a one-component, odourless, ready-to-use neutral silicone elastomer (alcoxy type) intended to produce sealing and bonding joints. It cures at room temperature in the presence of air moisture to give a flexible and strong seal with low modulus of elasticity. BLUESIL SLT 10T adheres without a primer on virtually all surfaces found in building construction and accepts movements of 25% in continuous service within a wide range of temperatures. 收起 | |
| Ketjenflex® 12 | Axcentive Sarl | Ketjenflex® 12 is a citrate based clear liquid. It is used as a partially bio-based plasticizer for inks, adhesives, and coatings. Ketjenflex® 12 can be used in vinyl formulations such as PVC plastics, vinyl flooring, solution vinyl resins, wood vinyl com...展開 Ketjenflex® 12 is a citrate based clear liquid. It is used as a partially bio-based plasticizer for inks, adhesives, and coatings. Ketjenflex® 12 can be used in vinyl formulations such as PVC plastics, vinyl flooring, solution vinyl resins, wood vinyl compounds, and PVC based plastisols. It can also be used in PVC based polymers, nitrocellulose resins, and cyanoacrylate adhesives. 收起 | |
| Triamino-Functional Trimethoxysilane | Dalian Onichem Co., Ltd. | Triamino-Functional Trimethoxysilane is a general purpose bonding additive especially suited for PVC plastisols. | Request Sample |
| Organosilane 2A301 | Dalian Onichem Co., Ltd. | Organosilane 2A301 is a biamine functional silane which acts as an adhesion promoter in isocyanate end-capped polyurethane polymers for sealant, adhesive and coating formulations. It is the best type of aminosilane for crosslinking plasticized PVC. This p...展開 Organosilane 2A301 is a biamine functional silane which acts as an adhesion promoter in isocyanate end-capped polyurethane polymers for sealant, adhesive and coating formulations. It is the best type of aminosilane for crosslinking plasticized PVC. This product is suitable for use with acrylic, isocyanate, polyurethane, ABS, PVC, and styrene polymers. 收起 | Request Sample |
| DEGACRYL® HS 4174 E | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4174 E is an organic dispersion of copolymers on methacrylic esters, olefins and polyesters basis. DEGACRYL® HS 4174 E achieves direct adhesion on aluminium and PET. Usage as an universal binder in PVC-free heat seal lacquers for sealing alum...展開 DEGACRYL® HS 4174 E is an organic dispersion of copolymers on methacrylic esters, olefins and polyesters basis. DEGACRYL® HS 4174 E achieves direct adhesion on aluminium and PET. Usage as an universal binder in PVC-free heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene terephthalate (PET) or vinyl (PVC). 收起 | Request Sample |
| DEGACRYL® HS 666 | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 666 is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is applied as an universal binder in PVC free, primerless heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene ...展開 DEGACRYL® HS 666 is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is applied as an universal binder in PVC free, primerless heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene terephthalate (PET) or vinyl (PVC). Primered with polyesters like DYNAPOL® L 206 / 208[1] adhesion to PET is achieved. 收起 | Request Sample |
| DEGACRYL® HS 4151 E | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4151 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is applied as an universal binder in PVC free, primerless heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyre...展開 DEGACRYL® HS 4151 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is applied as an universal binder in PVC free, primerless heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene terephthalate (PET) or vinyl (PVC). Primered with polyesters like DYNAPOL® L 206 / 208[1] adhesion to PET is achieved. 收起 | Request Sample |
| DEGACRYL® HS 4792 L | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4792 L is an organic solution based on ethyl methacrylate. It is suitable as a heat seal binder for sealing aluminium foil versus polystyrene (PS), vinyl (PVC) or polyvinylidene chloride (PVdC). DEGACRYL® HS 4792 L is tailormade for applicati...展開 DEGACRYL® HS 4792 L is an organic solution based on ethyl methacrylate. It is suitable as a heat seal binder for sealing aluminium foil versus polystyrene (PS), vinyl (PVC) or polyvinylidene chloride (PVdC). DEGACRYL® HS 4792 L is tailormade for applications where low temperature sealing and easy peel behavior are required. In formulations with PVC copolymer DEGACRYL® HS 4792 L will achieve good adhesion to aluminium. 收起 | Request Sample |
| SILQUEST A-174* SILANE | Momentive Performance Materials | Employed in adhesive and sealant systems cured via a free radical mechanism, such as polyesters, polyurethanes, acrylics and many thermoplastics such as PVC, polyolefins and polyurethanes. | |
| DIBUTYL PHTHALATE (DBP) | Aekyung Petrochemical Co., Ltd. | DIBUTYL PHTHALATE (DBP) is a common plasticizer for PVC. This product is highly compatible with other resins. It is used in construction materials, paint, adhesives, and lubricants. | |
| RHEOLATE® 644 | Elementis | RHEOLATE® 644 is a 25% solids solution of a polyether urea polyurethane-based associative rheology modifier designed for use in waterborne paints and in low PVC systems. | |
| DEGACRYL® HS 555 | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 555 is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene therephthalate (PET) or vinyl (PVC). DEGACRYL® HS 555 will give good adhesion to aluminium in formulation with PVC...展開 DEGACRYL® HS 555 is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene therephthalate (PET) or vinyl (PVC). DEGACRYL® HS 555 will give good adhesion to aluminium in formulation with PVC-copolymer. Primered with polyester like DYNAPOL® L 206 or 208[1] adhesion to PET is achieved. 收起 | Request Sample |
| DEGACRYL® HS 4150 E | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4150 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene therephthalate (PET) or vinyl (PVC). DEGACRYL® HS 4150 E will give good adhesion to aluminium in formulation with PVC...展開 DEGACRYL® HS 4150 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene therephthalate (PET) or vinyl (PVC). DEGACRYL® HS 4150 E will give good adhesion to aluminium in formulation with PVC-copolymer. Primered with polyester like DYNAPOL® L 206 or 208[1] adhesion to PET is achieved. 收起 | Request Sample |
| 3-Methacryloxypropyltriethoxysilane | Dalian Onichem Co., Ltd. | 3-Methacryloxypropyltriethoxysilane is a comonomer in radical cured resins, such as acrylic, polyester, methacrylate, and PVC. 3-Methacryloxypropyltriethoxysilane is a coupling agent for reinforced and filled polyester and acrylics. | Request Sample |
| Alkylsulfonic Acid Ester of Phenol Plasticizer | Beijing Entrepreneur Science &Trading Co., Ltd. | Alkylsulfonic acid ester of phenol is a common environmental friendly plasticizer.It possess excellent plasticizing and saponifying effect are suitable for various types of polymers such as PU and PVC. | |
| DEGACRYL® HS 4221 E | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4221 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is applied as an universal binder in PVC free, primerless heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyre...展開 DEGACRYL® HS 4221 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is applied as an universal binder in PVC free, primerless heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene terephthalate (PET) or vinyl (PVC). Primed with polyesters like DYNAPOL® L 206 / 208[1] adhesion to PET is achieved. Due to narrow molecular weight distribution, rub-off deposits can be minimized which leads to higher productivity. 收起 | Request Sample |
| DEGACRYL® HS 4322 E | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4322 E is an organic dispersion of copolymers on methacrylic esters, olefins and polyesters basis. DEGACRYL® HS 4322 E achieves direct adhesion on aluminium and PET. Due to its low haze properties when dry coated, it is ideally suited for transparent applications. General usage is as a binder in PVC-free heat seal lacquers for sealing aluminium foil or PET film versus polystyrene (PS), polyethylene terephthalate (PET), poly lactic acid (PLA) and polyvinyl chloride (PVC...展開 DEGACRYL® HS 4322 E is an organic dispersion of copolymers on methacrylic esters, olefins and polyesters basis. DEGACRYL® HS 4322 E achieves direct adhesion on aluminium and PET. Due to its low haze properties when dry coated, it is ideally suited for transparent applications. General usage is as a binder in PVC-free heat seal lacquers for sealing aluminium foil or PET film versus polystyrene (PS), polyethylene terephthalate (PET), poly lactic acid (PLA) and polyvinyl chloride (PVC). 收起 | Request Sample |
| 3-Methacryloxypropylmethyldimethoxysilane | Dalian Onichem Co., Ltd. | 3-Methacryloxypropylmethyldimethoxysilane is a comonomer in radical cured resins, such as acrylic, polyester, methacrylate, and PVC. 3-Methacryloxypropylmethyldimethoxysilane is used as a coupling agent for reinforced and filled polyester and acrylics. | Request Sample |
| Solvent Green 28 | Hangzhou Epsilon Chemical Co., Ltd. | Solvent Green 28 is used in coloring for transparent and opaque dyeing of PS, SAN, PMMA, PC, rigid PVC, CA, CAB and opaque dyeing of SB, ABS and ABS/PC blends. | |
| DEGACRYL® HS 4294 E | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4294 E is an organic dispersion of copolymers on methacrylic esters, olefins and polyesters basis. It is suitable as an universal binder in PVC-free heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polysty...展開 DEGACRYL® HS 4294 E is an organic dispersion of copolymers on methacrylic esters, olefins and polyesters basis. It is suitable as an universal binder in PVC-free heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene terephthalate (PET), polylactic acid (PLA) or vinyl (PVC). Due to narrow molecular weight distribution, rub-off deposits can be minimized which leads to higher productivity. Additionally, DEGACRYL® HS 4294 E has a high solid content of 52%. 收起 | Request Sample |
| VISIOMER® TRGDMA | Evonik Performance Materials GmbH, BL Oil Additives | VISIOMER® TRGDMA is a low viscosity dimethacrylate monomer that is ideal for use as a crosslinking agent for free radical polymerization, adhesion promoter and hardener for PVC plastisols, and component in reactive resins. | |
| VISIOMER® TMPTMA | Evonik Performance Materials GmbH, BL Oil Additives | VISIOMER® TMPTMA is a trifunctional methacrylate monomer. It is ideal for use as a crosslinking agent in free radical polymerization, as adhesion promoter and hardener for PVC plastisol, and coagent for peroxide crosslinking of elastomers. | |
| Solvent Orange 60 | Hangzhou Epsilon Chemical Co., Ltd. | Solvent Orange 60 is used in coloring for polystyrene, PS, HIPS, ABS, PC, RPVC, PMMA, SAN, AS, PET, resin, polymethylmethacrylate, unplasticized pvc and other plastics, also used in coloring of estron, caprone and terylene etc. | |
| DEGACRYL® HS 4220 E | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4220 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene therephthalate (PET) or vinyl (PVC). DEGACRYL® HS 4220 E will achieve good adhesion to aluminium in formulation with PVC...展開 DEGACRYL® HS 4220 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene therephthalate (PET) or vinyl (PVC). DEGACRYL® HS 4220 E will achieve good adhesion to aluminium in formulation with PVC-copolymer. Primered with polyester like DYNAPOL® L 206 or 208[1] adhesion to PET is achieved. Due to narrow molecular weight distribution, rub-off deposits can be minimized which leads to higher productivity. 收起 | Request Sample |
| NOURYBOND® 289 Adhesion Promoter | Evonik Operations GmbH, BL Crosslinkers | 封閉型異氰酸酯PVC塑料溶膠附著力促進劑，適用於汽車密封劑，應用於可見區域和抗裂底漆 | Request Sample |
| Tetrahydrofuran | Chemceed | Tetrahydrofuran (THF) is a versatile, highly polar solvent that is used in the manufacturer of adhesives, cellophane, elastomers, inks, pharmaceuticals, polyurethane coatings, PVC cement, and vinyl films. THF is used as a precursor to many polymers or che...展開 Tetrahydrofuran (THF) is a versatile, highly polar solvent that is used in the manufacturer of adhesives, cellophane, elastomers, inks, pharmaceuticals, polyurethane coatings, PVC cement, and vinyl films. THF is used as a precursor to many polymers or chemical syntheses. 收起 | |
| Solvent Orange 63 | Hangzhou Epsilon Chemical Co., Ltd. | Solvent Orange 63 is used in coloring for polystyrene, PS, HIPS, ABS, PC, RPVC, PMMA, SAN, AS, PA6, PET, ABS resin, polymethylmethacrylate, resin, unplasticized pvc and other plastics, also used in coloring of estron, caprone and terylene laser device. | |
| DEGACRYL® HS 4251 E | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4251 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. DEGACRYL® HS 4251 E is applied as an universal binder in PVC-free heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), poly...展開 DEGACRYL® HS 4251 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. DEGACRYL® HS 4251 E is applied as an universal binder in PVC-free heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene therephthalate (PET) or vinyl (PVC). Primed with polyesters like DYNAPOL® L 206 / 208[1] adhesion to PET is achieved. Due to narrow molecular weight distribution, rub-off deposits can be minimized which leads to higher productivity. Additionally, DEGACRYL® HS 4251 E has a higher solid content compared to the equivalent grade DEGACRYL® HS 4151 E. 收起 | Request Sample |
| VISIOMER® 1,4-BDDMA | Evonik Performance Materials GmbH, BL Oil Additives | VISIOMER® 1,4-BDDMA is a low viscosity dimethacrylate monomer. It is ideal for use as a crosslinking agent for the free radical polymerization, and as adhesion promoter and hardener for PVC plastisols, and a coagent for peroxide crosslinking of elastomers...展開 VISIOMER® 1,4-BDDMA is a low viscosity dimethacrylate monomer. It is ideal for use as a crosslinking agent for the free radical polymerization, and as adhesion promoter and hardener for PVC plastisols, and a coagent for peroxide crosslinking of elastomers. 收起 | |
| BURGESS NO. 30® | Burgess Pigment Company | BURGESS NO. 30® is a partially calcined clay used extensively in PVC compounds to improve insulation resistance. This product exhibits excellent dispersion and color uniformity, and can be used as an extender or filler in paints, coatings, adhesives, and ...展開 BURGESS NO. 30® is a partially calcined clay used extensively in PVC compounds to improve insulation resistance. This product exhibits excellent dispersion and color uniformity, and can be used as an extender or filler in paints, coatings, adhesives, and sealants. 收起 | |
| SR306F | Sartomer Americas | SR306F, tripropylene glycol diacrylate, is a lowvolatility, low-viscosity monomer for use in free radical polymerization. Suggested applications include: binder adhesives, glass, metal, optical, PVC floor, wood, paper and plastic coatings, conformal elect...展開 SR306F, tripropylene glycol diacrylate, is a lowvolatility, low-viscosity monomer for use in free radical polymerization. Suggested applications include: binder adhesives, glass, metal, optical, PVC floor, wood, paper and plastic coatings, conformal electronics, encapsulants, photoresists, solder masks, inks, paints and photopolymers. 收起 | |
| BURGESS 30P® | Burgess Pigment Company | BURGESS 30P® is a flash calcined median particle size clay used extensively in PVC compounds for improving electricals. This product exhibits low specific gravity and excellent color, and can be used as an extender or filler in paints, coatings, adhesives...展開 BURGESS 30P® is a flash calcined median particle size clay used extensively in PVC compounds for improving electricals. This product exhibits low specific gravity and excellent color, and can be used as an extender or filler in paints, coatings, adhesives, and sealants. 收起 | |
| SR611 | Sartomer Americas | SR611 is a clear liquid, alkoxylated tetrahydrofurfuryl acrylate monomer that offers reduced skin irritation potential and excellent adhesion to plastics, particularly PVC and polycarbonate. SR611 demonstrates good pigment wetting in screen and offset pri...展開 SR611 is a clear liquid, alkoxylated tetrahydrofurfuryl acrylate monomer that offers reduced skin irritation potential and excellent adhesion to plastics, particularly PVC and polycarbonate. SR611 demonstrates good pigment wetting in screen and offset printing systems. It is also effective in promoting intercoat adhesion. 收起 | |
| DEGACRYL® HS 4250 E | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4250 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene terephthalate (PET) or vinyl (PVC). DEGACRYL® HS 4250 E will achieve good adhesion to aluminium in formulation with PVC...展開 DEGACRYL® HS 4250 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene terephthalate (PET) or vinyl (PVC). DEGACRYL® HS 4250 E will achieve good adhesion to aluminium in formulation with PVC-copolymer. Primed with polyesters like DYNAPOL® L 206 / 208[1] adhesion to PET is achieved. Due to narrow molecular weight distribution, rub-off deposits can be minimized which leads to higher productivity. Additionally, DEGACRYL® VP 4250 E has a higher solid content compared to the equivalent grade DEGACRYL® 4150 E. 收起 | Request Sample |
| Dioctyl Terephthalate (DOTP) | Chemceed | Dioctyl Terephthalate (DOTP) is a general purpose plasticizer, and can be used as a phthalate replacement. As a PVC plasticizer, DOTP is used in formualtions of screen printing inks. Additionally, DOTP can be used in applications such as paints, lacque...展開 Dioctyl Terephthalate (DOTP) is a general purpose plasticizer, and can be used as a phthalate replacement. As a PVC plasticizer, DOTP is used in formualtions of screen printing inks. Additionally, DOTP can be used in applications such as paints, lacquers, inks, adhesives, and sealants. 收起 | |
| Dioctyl Phthalate (DOP) | Chemceed | Dioctyl Phthalate (DOP) is a general use Plasticizer. As a PVC plasticizer, DOP is used in formualtions of screen printing inks. Known for its good stability to heat and ultraviolet light, DOP can be used in applications such as paints, lacquers, inks, ad...展開 Dioctyl Phthalate (DOP) is a general use Plasticizer. As a PVC plasticizer, DOP is used in formualtions of screen printing inks. Known for its good stability to heat and ultraviolet light, DOP can be used in applications such as paints, lacquers, inks, adhesives, and sealants. 收起 | |
| BurnEx™ ZTA | Nyacol Nano Technology | BurnEx™ ZTA is a dry powder colloidal antimony Pentoxide and a synergist with PVC and other halogenated polymers. Its particles are about 10-30 microns in size and it is used as a flame retardant synergist in vinyl plastisols, injection molding compounds ...展開 BurnEx™ ZTA is a dry powder colloidal antimony Pentoxide and a synergist with PVC and other halogenated polymers. Its particles are about 10-30 microns in size and it is used as a flame retardant synergist in vinyl plastisols, injection molding compounds and calendar compounds. 收起 | |
| Diisononyl Phthalate (DINP) | Chemceed | Diisononyl Phthalate (DINP) is a general use high molecular weight Plasticizer. As a PVC plasticizer, DINP is used in formualtions of screen printing inks. Additionally, DINP can be used in applications such as anti-corrosion paints, anti-fouling pain...展開 Diisononyl Phthalate (DINP) is a general use high molecular weight Plasticizer. As a PVC plasticizer, DINP is used in formualtions of screen printing inks. Additionally, DINP can be used in applications such as anti-corrosion paints, anti-fouling paints, lacquers, inks, adhesives, and sealants. 收起 | |
| DEGACRYL® HS 4240 D | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4240 D is an aqueous emulsion of a thermoplastic, pure acrylic resin. Major application is binder for sealing aluminium foil versus polystyrene (PS), vinyl (PVC) or polyvinylidene chloride (PVdC). DEGACRYL® HS 4240 D achieves direct adhesion ...展開 DEGACRYL® HS 4240 D is an aqueous emulsion of a thermoplastic, pure acrylic resin. Major application is binder for sealing aluminium foil versus polystyrene (PS), vinyl (PVC) or polyvinylidene chloride (PVdC). DEGACRYL® HS 4240 D achieves direct adhesion to aluminum, no primer is required. 收起 | Request Sample |
| High Chlorinated Polyethylene Adhesive Level - YURON HCPE-H(B) | Yuron New Material | YURON HCPE-H(B) is a high clorinated polyethylene. It can bind all kinds of tubes, pipes, and plates which are made by PVC or chlorinated polyethylene and replace CPVC adhesives. It can be used for the bonding of metal material, fiber industry adhesives, ...展開 YURON HCPE-H(B) is a high clorinated polyethylene. It can bind all kinds of tubes, pipes, and plates which are made by PVC or chlorinated polyethylene and replace CPVC adhesives. It can be used for the bonding of metal material, fiber industry adhesives, and so on. 收起 | |
| Andisil 1110 Silane | AB Specialty Silicones | Andisil 1110 Silane is an amino silane coupling agent. It is used to provide bonds between inorganic substrates and organic polymers. Andisil 1110 Silane is recommended for fiberglass reinforced composites. It can also be used as an adhesion promoter in RTV silicones, ABC, PVC...展開 Andisil 1110 Silane is an amino silane coupling agent. It is used to provide bonds between inorganic substrates and organic polymers. Andisil 1110 Silane is recommended for fiberglass reinforced composites. It can also be used as an adhesion promoter in RTV silicones, ABC, PVC, and polystyrene. 收起 | |
| Dioctyl Sebacate (DOS) | Chemceed | Dioctyl Sebacate (DOS) is a phthalate-free plasticizer used for PVC, nitrocelluloses, styrene resins, and synthetic rubbers where low temperature performance is required. It is soluble in hydrocarbons, alcohols, ester, chlorocarbons, ether, benzene and o...展開 Dioctyl Sebacate (DOS) is a phthalate-free plasticizer used for PVC, nitrocelluloses, styrene resins, and synthetic rubbers where low temperature performance is required. It is soluble in hydrocarbons, alcohols, ester, chlorocarbons, ether, benzene and other organic solvents. DOS is recommended for use in adhesives and sealants. 收起 | |
| Diisodecyl Phthalate (DIDP) | Chemceed | Diisodecyl Phthalate (DIDP) is a general use high molecular weight Plasticizer. As a PVC plasticizer, DIDP is used in formualtions of screen printing inks. Additionally, DIDP can be used in applications such latex coatings, printing inks, textile coat...展開 Diisodecyl Phthalate (DIDP) is a general use high molecular weight Plasticizer. As a PVC plasticizer, DIDP is used in formualtions of screen printing inks. Additionally, DIDP can be used in applications such latex coatings, printing inks, textile coatings, paper coatings, and leather coatings, inks, adhesives, and sealants. 收起 | |
| Fillite Standard Grades | Tolsa, S.A. | Fillite Standard Grades consists of glass hard, inert, hollow silicate spheres. It is designed to reduce the weight of plastics, rubbers, resins, and cement. It can be used in PVC flooring, brake linings, phenolics and epoxies, cast polyesters, wallboar...展開 Fillite Standard Grades consists of glass hard, inert, hollow silicate spheres. It is designed to reduce the weight of plastics, rubbers, resins, and cement. It can be used in PVC flooring, brake linings, phenolics and epoxies, cast polyesters, wallboard joint compounds, oil well cement, and tile adhesives. 收起 | |
| SARBIO® 5103 Resin | Sartomer Americas | SARBIO® 5103 Resin is an alkoxylated acrylate monomer that offers excellent adhesion to plastics, particularly PVC and polycarbonate. SARBIO® 5103 monomer demonstrates good pigment wetting in screen and offset printing systems. It is also effective in pro...展開 SARBIO® 5103 Resin is an alkoxylated acrylate monomer that offers excellent adhesion to plastics, particularly PVC and polycarbonate. SARBIO® 5103 monomer demonstrates good pigment wetting in screen and offset printing systems. It is also effective in promoting intercoat adhesion. It exhibits good adhesion and chemical resistance. 收起 | |
| Epoxidized Soybean Oil (ESO) | Chemceed | 環氧化大豆油，是一種增塑劑，通常用於PVC和涂料應用。ChemCeed以桶裝、手提袋裝和散裝供應。包裝需定制的請來電查問 | |
| Dibutyl Phthalate (DBP) | Chemceed | 鄰苯二甲酸二丁酯是一種增塑劑，通常應用於PVC和涂料中。ChemCeed以桶裝、手提袋裝和散裝供應。包裝需定制的請來電查問 | |
| CN2203 | Sartomer Americas | 聚酯丙烯酸低聚物，用於膠印油墨時具有出色的水平衡性和良好的展色性。推薦用於塑料基材，特別是PVC、聚苯乙烯和聚烯烴。 | |
| Dibutyl Maleate (DBM) | Chemceed | Dibutyl Maleate (DBM) is a plasticizer for vinyl resins, and is used for copolymers applications involving PVC and vinyl acetates. Dibutyl Maleate is an unsaturated ester which is used for creating sulfosuccinate surfactants in detergents and paints. Othe...展開 Dibutyl Maleate (DBM) is a plasticizer for vinyl resins, and is used for copolymers applications involving PVC and vinyl acetates. Dibutyl Maleate is an unsaturated ester which is used for creating sulfosuccinate surfactants in detergents and paints. Other applications of DBM include use in plastisols, dispersions, coatings, adhesives, and synthetic lubricants. 收起 | |
| Dibutyl Sebacate (DBS) | Chemceed | Dibutyl Sebacate (DBS) is used as a plasticizer suited for low temperature and is compatible with PVC, acrylic, nitrile rubber, and celluloses. Due to its non-toxicity and low temp performance DBS is ideal for vinyl food contact films. In addition, Dibuty...展開 Dibutyl Sebacate (DBS) is used as a plasticizer suited for low temperature and is compatible with PVC, acrylic, nitrile rubber, and celluloses. Due to its non-toxicity and low temp performance DBS is ideal for vinyl food contact films. In addition, Dibutyl Sebacate finds use in coatings, cosmetics, lubricants, and pharmaceuticals. 收起 | |
| Baristar® 8810 | Minerals Girona S.A. | Baristar® 8810 has an oil absorption DOP of 14g/100g and a top cut of 10µm. It is a Barium sulphate (Baryte) of high purity with excellent grade of brightness. Its absolute chemical stability makes it an appropriate product for coatings, paints, polymers, plastics, PVC...展開 Baristar® 8810 has an oil absorption DOP of 14g/100g and a top cut of 10µm. It is a Barium sulphate (Baryte) of high purity with excellent grade of brightness. Its absolute chemical stability makes it an appropriate product for coatings, paints, polymers, plastics, PVC, polyurethanes, elastomer and rubber industries. 收起 | |
| Baristar® 8815 | Minerals Girona S.A. | Baristar® 8815 has an oil absorption DOP of 13g/100g and a top cut of 20µm. It is a Barium sulphate (Baryte) of high purity with excellent grade of brightness. Its absolute chemical stability makes it an appropriate product for coatings, paints, polymers, plastics, PVC...展開 Baristar® 8815 has an oil absorption DOP of 13g/100g and a top cut of 20µm. It is a Barium sulphate (Baryte) of high purity with excellent grade of brightness. Its absolute chemical stability makes it an appropriate product for coatings, paints, polymers, plastics, PVC, polyurethanes, elastomer and rubber industries. 收起 | |
| Baristar® 8825 | Minerals Girona S.A. | Baristar® 8825 has an oil absorption DOP of 12g/100g and a top cut of 30µm. It is a Barium sulphate (Baryte) of high purity with excellent grade of brightness. Its absolute chemical stability makes it an appropriate product for coatings, paints, polymers, plastics, PVC...展開 Baristar® 8825 has an oil absorption DOP of 12g/100g and a top cut of 30µm. It is a Barium sulphate (Baryte) of high purity with excellent grade of brightness. Its absolute chemical stability makes it an appropriate product for coatings, paints, polymers, plastics, PVC, polyurethanes, elastomer and rubber industries. 收起 | |
| Baristar® 9008 | Minerals Girona S.A. | Baristar® 9008 has an oil absorption DOP of 15g/100g and a top cut of 8µm. It is a Barium sulphate (Baryte) of high purity with excellent grade of brightness. Its absolute chemical stability makes it an appropriate product for coatings, paints, polymers, plastics, PVC...展開 Baristar® 9008 has an oil absorption DOP of 15g/100g and a top cut of 8µm. It is a Barium sulphate (Baryte) of high purity with excellent grade of brightness. Its absolute chemical stability makes it an appropriate product for coatings, paints, polymers, plastics, PVC, polyurethanes, elastomer and rubber industries. 收起 | |
| Baristar® 9010 | Minerals Girona S.A. | Baristar® 9010 has an oil absorption DOP of 14g/100g and a top cut of 10µm. It is a Barium sulphate (Baryte) of high purity with excellent grade of brightness. Its absolute chemical stability makes it an appropriate product for coatings, paints, polymers, plastics, PVC...展開 Baristar® 9010 has an oil absorption DOP of 14g/100g and a top cut of 10µm. It is a Barium sulphate (Baryte) of high purity with excellent grade of brightness. Its absolute chemical stability makes it an appropriate product for coatings, paints, polymers, plastics, PVC, polyurethanes, elastomer and rubber industries. 收起 | |
| BARISTAR® 9015 | Minerals Girona S.A. | Baristar® 9015 has an oil absorption DOP of 13g/100g and a top cut of 20µm. It is a Barium sulphate (Baryte) of high purity with excellent grade of brightness. Its absolute chemical stability makes it an appropriate product for coatings, paints, polymers, plastics, PVC...展開 Baristar® 9015 has an oil absorption DOP of 13g/100g and a top cut of 20µm. It is a Barium sulphate (Baryte) of high purity with excellent grade of brightness. Its absolute chemical stability makes it an appropriate product for coatings, paints, polymers, plastics, PVC, polyurethanes, elastomer and rubber industries. 收起 | |
| Baristar® 9025 | Minerals Girona S.A. | Baristar® 9025 has an oil absorption DOP of 12g/100g and a top cut of 30µm. It is a Barium sulphate (Baryte) of high purity with excellent grade of brightness. Its absolute chemical stability makes it an appropriate product for coatings, paints, polymers, plastics, PVC...展開 Baristar® 9025 has an oil absorption DOP of 12g/100g and a top cut of 30µm. It is a Barium sulphate (Baryte) of high purity with excellent grade of brightness. Its absolute chemical stability makes it an appropriate product for coatings, paints, polymers, plastics, PVC, polyurethanes, elastomer and rubber industries. 收起 | |
| Baristar® 9208 | Minerals Girona S.A. | Baristar® 9208 has an oil absorption DOP of 15g/100g and a top cut of 8µm. It is a Barium sulphate (Baryte) of high purity with excellent grade of brightness. Its absolute chemical stability makes it an appropriate product for coatings, paints, polymers, plastics, PVC...展開 Baristar® 9208 has an oil absorption DOP of 15g/100g and a top cut of 8µm. It is a Barium sulphate (Baryte) of high purity with excellent grade of brightness. Its absolute chemical stability makes it an appropriate product for coatings, paints, polymers, plastics, PVC, polyurethanes, elastomer and rubber industries. 收起 | |
| Baristar® 9210 | Minerals Girona S.A. | Baristar® 9210 has an oil absorption DOP of 14g/100g and a top cut of 10µm. It is a Barium sulphate (Baryte) of high purity with excellent grade of brightness. Its absolute chemical stability makes it an appropriate product for coatings, paints, polymers, plastics, PVC...展開 Baristar® 9210 has an oil absorption DOP of 14g/100g and a top cut of 10µm. It is a Barium sulphate (Baryte) of high purity with excellent grade of brightness. Its absolute chemical stability makes it an appropriate product for coatings, paints, polymers, plastics, PVC, polyurethanes, elastomer and rubber industries. 收起 | |
| Dioctyl Adipate (DOA) | Chemceed | Dioctyl adipate (DOA) is a PVC plasticizer that is also commonly used with primary plasticizers, like DOP, to create lubricant basetocks. Dioctyl adipate is also used in paints as a way to disperse pigments. For applications involving food, dioctyl adipat...展開 Dioctyl adipate (DOA) is a PVC plasticizer that is also commonly used with primary plasticizers, like DOP, to create lubricant basetocks. Dioctyl adipate is also used in paints as a way to disperse pigments. For applications involving food, dioctyl adipate can be used as a plasticizer in food contact polymers and rubbers. 收起 | |
| Butyl Benzyl Phthalate (BBP) | Chemceed | Butyl Benzyl Phthalate (BBP) is a is high solvating, fast fusing plasticizer with high efficiency which can be used with a variety of resins. BBP is used for many PVC calendaring and extrusion operations and is an industry standard for vinyl flooring. BBP...展開 Butyl Benzyl Phthalate (BBP) is a is high solvating, fast fusing plasticizer with high efficiency which can be used with a variety of resins. BBP is used for many PVC calendaring and extrusion operations and is an industry standard for vinyl flooring. BBP also finds use in many coatings, inks, adhesives, and caulks. 收起 | |
| Tri(2-Chloroisopropyl) Phosphate (TCPP) | Hainan Zhongxin Chemical Co., Ltd. | Tri(2-Chloroisopropyl) Phosphate (TCPP) is a colorless to light yellow transparent liquid with a chlorine content of at least 32.5%. It is primarily used as a general purpose chlorinated phosphate ester flame retardant. It is compatible with most resins and is recommended for use in the production of PU foams, PVC...展開 Tri(2-Chloroisopropyl) Phosphate (TCPP) is a colorless to light yellow transparent liquid with a chlorine content of at least 32.5%. It is primarily used as a general purpose chlorinated phosphate ester flame retardant. It is compatible with most resins and is recommended for use in the production of PU foams, PVC and adhesives. 收起 | |
| SONGLIGHT® 1230 | Songwon International AG | SONGLIGHT® 1230 is a liquid hindered amine light stabilizer (HALS) of NOR type. It is an effective light stabilizer in acrylics, polyurethanes, sealants, adhesives, rubbers, impact modified polyolefin blends (TPE, TPO), vinyl polymers (PVC, PVB), PP and u...展開 SONGLIGHT® 1230 is a liquid hindered amine light stabilizer (HALS) of NOR type. It is an effective light stabilizer in acrylics, polyurethanes, sealants, adhesives, rubbers, impact modified polyolefin blends (TPE, TPO), vinyl polymers (PVC, PVB), PP and unsaturated polyesters. Can be used in automotive and industrial coating, decorative paint and wood stains or varnishes. 收起 | |
| CN980 | Sartomer Americas | CN980 is a urethane acrylate oligomer that offers superior physical properties and fast cure rates. CN980 has excellent resistance to polar solvents and has good water, acid and base resistance. CN980 also has superior abrasion resistance, flexibility and reverse impact resistance. Metal coatings, paper coatings, PVC...展開 CN980 is a urethane acrylate oligomer that offers superior physical properties and fast cure rates. CN980 has excellent resistance to polar solvents and has good water, acid and base resistance. CN980 also has superior abrasion resistance, flexibility and reverse impact resistance. Metal coatings, paper coatings, PVC floor coatings and inks are recommended uses for this product. 收起 | |
| Ekosol ES 3450A | T&L Co., Ltd. Polymer Technology Centre | Ekosol ES 3450A is an eco-friendly plastisol - free of PVCs, heavy metals, VOCs, and phthalates - featuring soft feel and good adhesion to various substrates. This product is ideal for use as an adhesive in heat transfer printing, hot-peel transfer printi...展開 Ekosol ES 3450A is an eco-friendly plastisol - free of PVCs, heavy metals, VOCs, and phthalates - featuring soft feel and good adhesion to various substrates. This product is ideal for use as an adhesive in heat transfer printing, hot-peel transfer printing, and hot foil stamping applications. 收起 | |
| Ekosol ES 5300W | T&L Co., Ltd. Polymer Technology Centre | Ekosol ES 5300W is an eco-friendly plastisol - free of PVCs, heavy metals, VOCs, and phthalates - in the form of an adhesive ink containing white pigment. Benefits include shorter processing times and no need for an extra adhesive. This product is ideal f...展開 Ekosol ES 5300W is an eco-friendly plastisol - free of PVCs, heavy metals, VOCs, and phthalates - in the form of an adhesive ink containing white pigment. Benefits include shorter processing times and no need for an extra adhesive. This product is ideal for use in hot-peel transfer printing and digitally printed white backing applications. 收起 | |
| Diisodecyl Adipate (DIDA) | Chemceed | Diisodecyl Adipate (DIDA) is a plasticizer with excellent low-temperature properties. DIDA works well as a part of a plasticizer blend, and is compatible with PVC, Cellulose acetate butyrate, Ethyl cellulose, Nitrocellulose, Polychloroprene,and Polyvinyl ...展開 Diisodecyl Adipate (DIDA) is a plasticizer with excellent low-temperature properties. DIDA works well as a part of a plasticizer blend, and is compatible with PVC, Cellulose acetate butyrate, Ethyl cellulose, Nitrocellulose, Polychloroprene,and Polyvinyl butyral. In inks and coatings, DIDA can soften binders to improve flexibility. DIDA can also be used in used in adhesives, caulk, sealants, and paint to improve properties. 收起 | |
| SR259 | Sartomer Americas | 一種低揮發性單體，用來生產柔軟的自由基固化彈性膜。 | |
| SONGNOX® 1290 | Songwon International AG | SONGNOX® 1290 is a primary antioxidant for organic polymers. It provides long term heat stability - protects physical properties during storage and use of end-product. SONGNOX® 1290 is highly effective in plastics including crystal and high impact Polystyrene, ABS terpolymer, PVC...展開 SONGNOX® 1290 is a primary antioxidant for organic polymers. It provides long term heat stability - protects physical properties during storage and use of end-product. SONGNOX® 1290 is highly effective in plastics including crystal and high impact Polystyrene, ABS terpolymer, PVC, Polyamides, Polyurethanes, Elastomers, Adhesives, Rubbers such as EPDM, SBS and rubber blends with Polyolefins, and natural and synthetic tackifier resins. 收起 | |
| SABO®STAB UV 79 | SABO S.p.A | SABO®STAB UV 79 is a polymeric hindered amine light stabilizer (HALS) which is effective in a broad range of polymers and applications. The product is particularly useful in PE applications (injection molding, rotational molding, water & gas pipe, film, and tape), PP (injection molding, film, and fibers), TPO, polyamide fibers, flexible and rigid PVC...展開 SABO®STAB UV 79 is a polymeric hindered amine light stabilizer (HALS) which is effective in a broad range of polymers and applications. The product is particularly useful in PE applications (injection molding, rotational molding, water & gas pipe, film, and tape), PP (injection molding, film, and fibers), TPO, polyamide fibers, flexible and rigid PVC, styrenic TPE’s, polyurethanes, and specialty adhesive applications. 收起 | |
| SR9003B | Sartomer Americas | SR9003B, propoxylated neopentyl glycol diarylate, is a low viscosity, low skin irritation monomer for use in free radical polymerization. This product offers hardness, abrasion, water, and chemical resistance. SR9003B also offers weatherability, flexibility, adhesion, impact strength, and low shrinkage for pressure sensitive adhesives, photopolymers, inks, conformal, solder mask, photoresists electronics, and metal, paper, plastic, PVC...展開 SR9003B, propoxylated neopentyl glycol diarylate, is a low viscosity, low skin irritation monomer for use in free radical polymerization. This product offers hardness, abrasion, water, and chemical resistance. SR9003B also offers weatherability, flexibility, adhesion, impact strength, and low shrinkage for pressure sensitive adhesives, photopolymers, inks, conformal, solder mask, photoresists electronics, and metal, paper, plastic, PVC floor, release, and wood coating applications. 收起 | |
| SR268 | Sartomer Americas | 一種低揮發性雙官能單體。 | |
| SR295 | Sartomer Americas | 一種低皮膚刺激性四功能單體。 | |
| SR256 | Sartomer Americas | 一種輕度水分散的單官能團單體，用作一種活性稀釋劑。 | |
| Acetyl Tributyl Citrate (ATBC) | Chemceed | Acetyl Tributyl Citrate (ATBC) is a used as a biodegradable plasticizer for PVC and cellulose derivates, and it is approved for food contact materials and can even been used as a food additive. ATBC is also used as an emollient for personal care/cosmetics...展開 Acetyl Tributyl Citrate (ATBC) is a used as a biodegradable plasticizer for PVC and cellulose derivates, and it is approved for food contact materials and can even been used as a food additive. ATBC is also used as an emollient for personal care/cosmetics products such as aerosol hair sprays and nail polishes. In addition, ATBC can be used for pharmaceutical coatings (USP grade available), lubricants, and inks. 收起 | |
| SONGNOX® 2450 | Songwon International AG | SONGNOX® 2450 is a primary antioxidant for organic polymers. It is a high performance sterically hindered phenolic antioxidant that protects the polymer against thermo-oxidative degradation during the manufacturing processes and in end-use applications. It is an effective antioxidant for styrenics, synthetic rubbers, POM homo & copolymer, polyurethanes, polyamides, polyesters, MBS and PVC...展開 SONGNOX® 2450 is a primary antioxidant for organic polymers. It is a high performance sterically hindered phenolic antioxidant that protects the polymer against thermo-oxidative degradation during the manufacturing processes and in end-use applications. It is an effective antioxidant for styrenics, synthetic rubbers, POM homo & copolymer, polyurethanes, polyamides, polyesters, MBS and PVC. It can be used with benzotriazoles or HALS for thermal and light stabilization in outdoor use. 收起 | |
| Titanate Coupling Agent HW-201 | Zhejiang Feidian Chemical Co., Ltd. | HW-201 is a yellow transparent thick liquid. It is used as a substrate resin for PE, PP, PS, P, AS, ABS, PVC, SBS, polyester, polyether, polyurethane, polyamide, polycarbonates, and other thermoplastic, thermosetting resins plus elastic bodies. It is solu...展開 HW-201 is a yellow transparent thick liquid. It is used as a substrate resin for PE, PP, PS, P, AS, ABS, PVC, SBS, polyester, polyether, polyurethane, polyamide, polycarbonates, and other thermoplastic, thermosetting resins plus elastic bodies. It is soluble in isopropyl alcohol, xylene, toluene, mineral oil, making hydrolytic precipitation in water, innocuous non-corroding liquid, lethal dose for litter white rat being consistent with semi polar material. 收起 | |
| BYK®-035 | BYK | 用於有光澤和半光乳液漆以及乳液彈性體的礦物油消泡劑，消除生產和涂裝過程中的泡沫。特別適合聚氯乙烯含量為20-40%的乳液體系。高剪力不會對效力產生影響。 | |
| Titanate Coupling Agent HW-101 | Zhejiang Feidian Chemical Co., Ltd. | HW-101 is a claret transparent thick liquid. It is used as a substrate resin for PE, PP, PS, P, AS, ABS, PVC, SBS, polyester, polyether, polyurethane, polyamide, polycarbonates, and other thermoplastic, thermosetting resins plus elastic bodies. It can als...展開 HW-101 is a claret transparent thick liquid. It is used as a substrate resin for PE, PP, PS, P, AS, ABS, PVC, SBS, polyester, polyether, polyurethane, polyamide, polycarbonates, and other thermoplastic, thermosetting resins plus elastic bodies. It can also be used as inorganic fillers for CaCO3, MgCO3, BaSO4, CaSO4, MgO, Al(OH)3, talcum powder, mica powder, titanium pigment, wollastonite powder, carbon black, iron red, chrome yellow, antimony trioxide, ammonium polyphosphate, and barium metaborate. 收起 | |
| SR395 | Sartomer Americas | 一種單官能憎水單體。 | |
| SR355 | Sartomer Americas | 一種低皮膚刺激性四官能單體，具備快速固化響應和高交聯密度的特性。 | |
| High Chlorinated Polyethylene-YURON HCPE-H (A) | Yuron New Material | High Chlorinated Polyethylene-YURON HCPE-H (Adhesive Level) is an environmental protection and high-performance resin for the adhesive market. It is deeply chlorinated by PE resin through using aqueous phase chlorination technology. HCPE-H has a high molecular weight, high viscosity and strong adhesive force. It can be dissolved in toluene, xylene, and dichloroethane. This product can bind all kinds of PVC or CPE tubes, pipes, and plates, replace CPVC...展開 High Chlorinated Polyethylene-YURON HCPE-H (Adhesive Level) is an environmental protection and high-performance resin for the adhesive market. It is deeply chlorinated by PE resin through using aqueous phase chlorination technology. HCPE-H has a high molecular weight, high viscosity and strong adhesive force. It can be dissolved in toluene, xylene, and dichloroethane. This product can bind all kinds of PVC or CPE tubes, pipes, and plates, replace CPVC adhesives, bond metal materials. and can be used as an adhesive in the fiber industry. 收起 | |
| Titanate Coupling Agent HW‐102 | Zhejiang Feidian Chemical Co., Ltd. | Titanate Coupling Agent HW‐102 is isopropyl tri(dioctylphosphate) titanate, and is supplied as a yellow transparent thick liquid. It is suitable for substrate resins such as PE, PP, PS, P, AS, ABS, PVC, SBS, polyester, polyether, polyurethane, polyamide, ...展開 Titanate Coupling Agent HW‐102 is isopropyl tri(dioctylphosphate) titanate, and is supplied as a yellow transparent thick liquid. It is suitable for substrate resins such as PE, PP, PS, P, AS, ABS, PVC, SBS, polyester, polyether, polyurethane, polyamide, polycarbonates and other thermoplastic, thermosetting resins as well as elastic bodies. This product also finds application in inorganic fillers: CaCO3, MgCO3, BaSO4, CaSO4, MgO, Al(OH)3, talcum powder, mica powder, titanium pigment, wollastonite powder, carbon black, iron red, chrome yellow, antimony trioxide, ammonium polyphosphate, barium metaborate. 收起 | |
| CN981 | Sartomer Americas | 脂肪族聚酯/聚醚氨基甲酸酯二丙烯酸酯低聚體。具有出色的耐候性，固有的低粘度，很好的平衡了高拉伸強度和高伸長，並具有快速固化響應能力。 | |
| SONGSORB® 3280 | Songwon International AG | SONGSORB® 3280 is a strong absorber of ultraviolet radiation in the 290~400nm region and has a high degree of photostability - photochemical energy absorbed in the ultraviolet region is dissipated as thermal energy. It features strong UV absorption, low initial color, good solubility in plasticizers and monomers, moderately low volatility, and excellent compatibility in a wide variety of substrates. SONGSORB® 3280 is recommended for use in polyolefins, PVC...展開 SONGSORB® 3280 is a strong absorber of ultraviolet radiation in the 290~400nm region and has a high degree of photostability - photochemical energy absorbed in the ultraviolet region is dissipated as thermal energy. It features strong UV absorption, low initial color, good solubility in plasticizers and monomers, moderately low volatility, and excellent compatibility in a wide variety of substrates. SONGSORB® 3280 is recommended for use in polyolefins, PVC, styrene homo and copolymers, ABS, acrylic polymers, unsaturated polyesters, thermoplastic urethanes, moisture cured polyurethanes, polyacetals, polyvinylbutyral, two component epoxies and urethanes, oil alkyds and thermosetting acrylic enamels. 收起 | |
| SR339 | Sartomer Americas | 一種低揮發性單官能芳香族單體，具有良好的附著性。 | |
| SR344 | Sartomer Americas | 一種低皮膚刺激性水溶單體，用來生產柔軟的自由基固化彈性膜。 | |
| BYK®-038 | BYK | 礦物油消泡劑，適用於乳膠漆、工業乳膠、乳液灰泥和乳膠膠粘劑，可消除其生產和施工過程中產生的泡沫 | |
| SR306HP | Sartomer Americas | 產品設計用來滿足滅菌包裝和家具市場的苛刻要求。低溶劑和酸濃度，用於一種低氣味和抽出性UV/EB固化涂料。 | |
| CN982A75 | Sartomer Americas | 與SR-306混合的脂肪族聚酯/聚醚氨基甲酸酯二丙烯酸酯低聚體。具有出色的耐候性，固有的低粘度，高拉伸強度和高伸長以及快速固化響應能力。 | |
| CN982B88 | Sartomer Americas | 與SR-238混合的脂肪族聚酯/聚醚氨基甲酸酯二丙烯酸酯低聚體。具有出色的耐候性，固有的低粘度，高拉伸強度和高伸長以及快速固化響應能力。 | |
| SR350 | Sartomer Americas | 一種低揮發性三官能單體，為自由基聚合提供快速固化響應。 | |
| SR9041 | Sartomer Americas | 五丙烯酸酯，具備耐磨性、柔韌性和硬度，以及對UV/EB固化的快速響應。低皮膚刺激性。 | |
| SR444 | Sartomer Americas | 含側鏈羥基基團。一種低揮發性，快速固化單體，用於自由基聚合。 | |
| SR499 | Sartomer Americas | 一種低皮膚刺激性、快速固化單體，用於自由基聚合。 | |
| SR492 | Sartomer Americas | 3摩爾丙氧基化三羥甲基丙烷三丙烯酸酯, 皮膚刺激性低，用於自由基聚合快速固化單體。 | |
| SR9020 | Sartomer Americas | 一種三官能單體，具備低粘度、良好的柔韌性、快速固化和出色的硬度。 |
