| Actigum™ VSX 20 texturizer | Cargill Agricola S/A |
|
Actigum™ VSX 20 texturizer is a rheology modifier that builds over the well-known properties of two highly safe and nature-derived ingredients: Scleroglucan and Xanthan Gum. The combination of those 2 nature-derived polymers provides enhanced functional b...view more
Actigum™ VSX 20 texturizer is a rheology modifier that builds over the well-known properties of two highly safe and nature-derived ingredients: Scleroglucan and Xanthan Gum. The combination of those 2 nature-derived polymers provides enhanced functional benefits such as a high yield value resulting in good suspending properties, and a higher viscosity than what can be obtained with the individual ingredients at the same dosage. This product is recommended for skin care, sun care, toiletries, and hair care products. view less
Compliance Highlights Available
|
|
| AGENABON 20.219 | AGRANA |
|
AGENABON 20.219 is produced by saccharification and spray-drying of corn starch. It is a free-flowing, slightly hygroscopic powder that solves readily in water.
Compliance Highlights Available
|
|
| AGENAFLO 9050 | AGRANA |
|
AGENAFLO 9050 is a lipophilic (= hydrophobically modified) waxy corn starch. Common uses include lotions, creams, sunscreens, deodorants, and mineral cosmetics. AGENAFLO 9050 absorbs excess moisture and sebum without whitening. It reduces tackiness and gr...view more
AGENAFLO 9050 is a lipophilic (= hydrophobically modified) waxy corn starch. Common uses include lotions, creams, sunscreens, deodorants, and mineral cosmetics. AGENAFLO 9050 absorbs excess moisture and sebum without whitening. It reduces tackiness and greasiness while giving skin a velvety appearance. view less
Compliance Highlights Available
|
|
| AGENAFLO OS 9051 | AGRANA |
|
AGENAFLO OS 9051 is a non-GMO aluminum octenylsuccinic modified starch for use as softening / texturing agent. It can be used in a wide range of applications including skin care creams, sun protection, after shave lotions, eye shadow powder and creams, an...view more
AGENAFLO OS 9051 is a non-GMO aluminum octenylsuccinic modified starch for use as softening / texturing agent. It can be used in a wide range of applications including skin care creams, sun protection, after shave lotions, eye shadow powder and creams, and liquid make up. view less
Compliance Highlights Available
|
|
| AGENAFLO TS | AGRANA |
|
AGENAFLO TS s a hydrophobically modified tapioca starch with Polymethylsilsequioxane. It can be used in aerosol applications, skin care, colour cosmetic and powder applications. It should be handled like native starch (no aqueous heat treatment >45°C). AG...view more
AGENAFLO TS s a hydrophobically modified tapioca starch with Polymethylsilsequioxane. It can be used in aerosol applications, skin care, colour cosmetic and powder applications. It should be handled like native starch (no aqueous heat treatment >45°C). AGENAFLO TS can be easily dispersed in emulsions and lead to smooth dispersion. It performs slight shine left on the skin. view less
Compliance Highlights Available
|
|
| AGENAJEL 20.306 | AGRANA |
|
AGENAJEL 20.306 is an instant (= cold water swelling) modified waxy corn starch. AGENAJEL 20.306 features as natural rheology modifier and thickener according to COSMOS-standard. It is used as natural rheology modifier in personal care emulsions and provi...view more
AGENAJEL 20.306 is an instant (= cold water swelling) modified waxy corn starch. AGENAJEL 20.306 features as natural rheology modifier and thickener according to COSMOS-standard. It is used as natural rheology modifier in personal care emulsions and provides a smooth and creamy texture. view less
Compliance Highlights Available
|
|
| AGENAJEL 20.313 | AGRANA |
|
AGENAJEL 20.313, a cold water soluble starch-ether based on waxy maize starch (edible), is a rheology modifier and creaminess enhancer. The white-yellowish power is cold water swellable and shear-thinning with rapid viscosity recovery. It is ideal for use...view more
AGENAJEL 20.313, a cold water soluble starch-ether based on waxy maize starch (edible), is a rheology modifier and creaminess enhancer. The white-yellowish power is cold water swellable and shear-thinning with rapid viscosity recovery. It is ideal for use in applications as a thickener in creams, lotions, and cream shampoos. view less
Compliance Highlights Unavailable
|
|
| AGENAJEL 20.383 | AGRANA |
|
AGENAJEL 20.383 is a cook-up starch. It has to be heated up (gelatinized) in aqueous phase (water) for thickening effect – but it has a lower gelatinization temperature (~ 60°C) than native starches (~ 80°C). AGENAJEL 20.383 shows an excellent stability a...view more
AGENAJEL 20.383 is a cook-up starch. It has to be heated up (gelatinized) in aqueous phase (water) for thickening effect – but it has a lower gelatinization temperature (~ 60°C) than native starches (~ 80°C). AGENAJEL 20.383 shows an excellent stability against heat, acid, shear, freezing and thawing. It is ideal for use as a thickener in shampoos, face wash, creams, and lotions. view less
Compliance Highlights Unavailable
|
|
| AGENAJEL CLEAR | AGRANA |
|
AGENAJEL CLEAR is used as natural rheology modifier in personal care emulsions and gels, frequently in combination with xanthan. It is ideal for use in hair care, skin care, and as a natural thickener.
Compliance Highlights Available
|
|
| AGENAMALT 20.222 | AGRANA |
|
AGENAMALT 20.222 is a spray-dried saccharification product. The fine, white powder is a free-flowing, slightly hygroscopic powder that solves readily in water and consist of a special carbohydrate composition. AGENAMALT 20.222 corresponds to Pharm.Eur and...view more
AGENAMALT 20.222 is a spray-dried saccharification product. The fine, white powder is a free-flowing, slightly hygroscopic powder that solves readily in water and consist of a special carbohydrate composition. AGENAMALT 20.222 corresponds to Pharm.Eur and USP. view less
Compliance Highlights Available
|
|
| AGENAMALT 20.233 | AGRANA |
|
AGENAMALT 20.233 is an organic maltodextrin is produced by saccharification and spray-drying of organic waxy corn. It is a free-flowing, very easily soluble powder with a low hygroscopic character and consists of a mixture of saccharids without any starch...view more
AGENAMALT 20.233 is an organic maltodextrin is produced by saccharification and spray-drying of organic waxy corn. It is a free-flowing, very easily soluble powder with a low hygroscopic character and consists of a mixture of saccharids without any starch. view less
Compliance Highlights Available
|
|
| AGENAMALT 20.234 | AGRANA |
|
AGENAMALT 20.234 is produced by saccharification and spray-drying of organic corn. The organic maltodextrin is a free-flowing, very easily soluble powder with a little hygroscopic character and consist of a mixture of saccharids without any starch. AGENAM...view more
AGENAMALT 20.234 is produced by saccharification and spray-drying of organic corn. The organic maltodextrin is a free-flowing, very easily soluble powder with a little hygroscopic character and consist of a mixture of saccharids without any starch. AGENAMALT 20.234 corresponds to Pharm.Eur and USP. view less
Compliance Highlights Available
|
|
| AGENAMALT 20.235 | AGRANA |
|
AGENAMALT 20.235 is an organic maltrodextrin produced by saccharification and spray-drying of organic corn. It is a free-flowing, very easily soluble powder with a low hygroscopic character and consists of a mixture of saccharids without any starch.
Compliance Highlights Available
|
|
| AGENANOVA 30.326 | AGRANA |
|
AGENANOVA 30.326 is a free-flowing, slightly hygroscopic maltodextrin powder that solves readily in water.
Compliance Highlights Available
|
|
| AGENAPEEL 500 | AGRANA |
|
AGENAPEEL 500 is a coarse rice flour for use as exfoliant/peeling agent in PC. It is γ-sterilized, non-GMO and fully biodegradable.
Compliance Highlights Available
|
|
| Barley Natural | AGRANA |
|
Barley Natural is a native barley starch with excellent microbiological status. It is ideal for use in hair care, skin care, and color cosmetics.
Compliance Highlights Available
|
|
| Bicoalgae® ω3 (Omega-3) | BICOSOME SL |
|
Bicoalgae® ω3 is a microalgae-based delivery system that works to resolve ageing resulted from chronic inflammation. Bicoalgae® ω3 reduces age related pro-inflammatory cytokines and protects the skin from ROS induced by UV-Vis and Blue light. In clinical ...view more
Bicoalgae® ω3 is a microalgae-based delivery system that works to resolve ageing resulted from chronic inflammation. Bicoalgae® ω3 reduces age related pro-inflammatory cytokines and protects the skin from ROS induced by UV-Vis and Blue light. In clinical studies, Bicoalgae® ω3 restored TEWL from pathological levels and improved signs and symptoms of skin inflammatory conditions. Bicoalgae® ω3 stabilises and transports two microalgae superfoods, N gaditana and I galbana, rich in EPA and DHA, to deep Epidermal layers, boosting their effects in more than 200%. Bicoalgae® ω3 efficacy relies on its capacity to make these molecules available in deep skin layers for orchestrating the biosynthesis of special mediators (SPMs) that stimulate the resolution of inflammaging. view less
Compliance Highlights Unavailable
|
Request Sample |
| Bicoalgae® XT | BICOSOME SL |
|
Bicoalgae® XT is a microalgae-based delivery system that increases the skin’s defences and repairs the effects of ageing acceleration due to modern lifestyle. Bicoalgae® XT provides clinically proven all-round anti-aging benefits, including wrinkle reduct...view more
Bicoalgae® XT is a microalgae-based delivery system that increases the skin’s defences and repairs the effects of ageing acceleration due to modern lifestyle. Bicoalgae® XT provides clinically proven all-round anti-aging benefits, including wrinkle reduction, improved skin firmness, increased brightness, accelerated cell renewal, increased anti-oxidant efficacy and reduced lipid peroxidation. In addition, Bicoalgae® XT protects the skin against pollution particles and neutralises the damage of blue light radiation. The bicosomes of Bicoalgae® XT incorporate the microalgae H pluvialis, rich in Astaxanthin, a powerful molecule considered “the king of antioxidants” (65 times stronger than Vitamin C). Bicoalgae® XT stabilises and delivers the bioactives from H pluvialis in deep Epidermal layers. This ingredient also improves microalgae organoleptic characteristics allowing for easy and attractive formulations. view less
Compliance Highlights Unavailable
|
Request Sample |
| BICOBIOME® | BICOSOME SL |
|
BICOBIOME® is a microbiome and skin-restoring system. It improves aging and acne signs in mature skin and restores scalp health in volunteers with oily and dandruff scalp.
Compliance Highlights Unavailable
|
Request Sample |
| Bicohair® HP | BICOSOME SL |
|
Bicohair® HP (Heat Protection) is a hair delivery system specially created to protect the hair from the damage caused by heat tools and aggressive thermal procedures. Bicohair® HP provides complete hair coverage with wash-off resistance. Its use prevent...view more
Bicohair® HP (Heat Protection) is a hair delivery system specially created to protect the hair from the damage caused by heat tools and aggressive thermal procedures. Bicohair® HP provides complete hair coverage with wash-off resistance. Its use prevent and repairs the thermal damage being indicated in non-sulphate based shampoos, conditioners, hair masks and leave-on formulations. Bicohair® HP adheres to the hair cuticle adding a barrier to the direct contact of the heat. The vesicle structures cover the hair shaft and the disc structures penetrate through the inter-cuticle spaces, generating hair compactness, closing cuticles, recovering hair hydration and improving the mechanical properties such as elasticity and breaking stress, promoting a visual anti fly-away effect. view less
Compliance Highlights Unavailable
|
Request Sample |
| Bicohair® UP | BICOSOME SL |
|
Bicohair® Anti Urban Pollution is a hair delivery system that adheres to the hair cuticle working as a shield protector that repeals pollution particles. Bicohair® UP protects hair proteins from the degradation and decreases the colour loss caused by UV e...view more
Bicohair® Anti Urban Pollution is a hair delivery system that adheres to the hair cuticle working as a shield protector that repeals pollution particles. Bicohair® UP protects hair proteins from the degradation and decreases the colour loss caused by UV exposure and daily washings, being indicated in non-sulphate based shampoos, conditioners, hair masks and leave-on formulas. Bicohair® UP adheres to the hair cuticle by electrostatic interactions. The vesicle structures cover the hair shaft and repeal the pollution particles, whereas the disc structures penetrate through the inter-cuticle spaces delivering carotene molecules to the cortex, which prevents the oxidation of pigments and loss of colour caused by UV exposure and daily washings. view less
Compliance Highlights Unavailable
|
Request Sample |
| Bicomide® | BICOSOME SL |
|
Bicomide® is a delivery system specially developed to oily skin with Blue light protection. The clinical studies showed that Bicomide® regulates the sebum production at source, reducing large pores and the shiny effect. Bicomide® also decreases the popula...view more
Bicomide® is a delivery system specially developed to oily skin with Blue light protection. The clinical studies showed that Bicomide® regulates the sebum production at source, reducing large pores and the shiny effect. Bicomide® also decreases the population of C acnes on the skin surface, equilibrating the microbiome and promoting a cleaning up effect on acne prone skin volunteers. The bicosomes of Bicomide® were designed to target the follicles. These bicosomes are distributed in the Epidermis surrounding the follicles and the flat skin areas, where they deliver the actives to regulate sebum and microbiome. The bicosome structure per se boosts these effects by strengthening the skin barrier function, which plays an important role in the equilibrium of the microbiome. view less
Compliance Highlights Unavailable
|
Request Sample |
| Bicosome® FS | BICOSOME SL |
|
Bicosome® Filling-Up System (FS) is a biomimetic filler of the inter-corneocyte spaces, working as a repairing agent of skin and lips areas. It improves and restores skin barrier function. This premium active ingredient reconstructs the skin lipid organiz...view more
Bicosome® Filling-Up System (FS) is a biomimetic filler of the inter-corneocyte spaces, working as a repairing agent of skin and lips areas. It improves and restores skin barrier function. This premium active ingredient reconstructs the skin lipid organization of the stratum corneum. It boosts the biological function of deeper layers, improves elasticity, firmness, and reduces water loss with long-lasting effects of 7 days. Bicosome® FS is used in cosmetic applications, recovering the skin after aggressions such as pollution and sun exposure, chemical or physical treatments, like peelings, lasers, some dermatological therapies. view less
Compliance Highlights Unavailable
|
Request Sample |
| Bicotene® Natural | BICOSOME SL |
|
Bicotene® Natural is an anti photoaging system that works providing deep biological sun protection. Bicotene® Natural provides stabilized pro retinol molecules with target delivery in the Epidermis. Bicotene® protects from oxidative stress before, during ...view more
Bicotene® Natural is an anti photoaging system that works providing deep biological sun protection. Bicotene® Natural provides stabilized pro retinol molecules with target delivery in the Epidermis. Bicotene® protects from oxidative stress before, during and after UVA, UVB, IR & Vis (includying blue light) exposure. Bicotene® protects cell DNA from UV damage and repairs cell membranes after UV-Vis exposure. This product is designed to be used in skincare products, sun care products, and colour cosmetics. view less
Compliance Highlights Unavailable
|
Request Sample |
| Bicowhite® Complex | BICOSOME SL |
|
Bicowhite® Complex provides multi-target delivery of five whitening actives (azeloglicine, niacinamide, bisabolol, vitamin C and phytic acid) that effectively blocks the main processes involved in dark spot formation and elimination. Bicowhite® uses the B...view more
Bicowhite® Complex provides multi-target delivery of five whitening actives (azeloglicine, niacinamide, bisabolol, vitamin C and phytic acid) that effectively blocks the main processes involved in dark spot formation and elimination. Bicowhite® uses the Bicosome® technology platform, a double encapsulation and target delivery system to specific skin layers, regulating melanin formation even under UV exposure, reducing age spots without damaging the skin. Bicowhite® has high specificity for hyper-pigmented areas. For more info and samples, please visit our website. view less
Compliance Highlights Unavailable
|
Request Sample |
| BIOGEL® Argan Butter | Phoenix Chemical, Inc. |
|
BIOGEL® Argan Butter has mild odor and excellent melting properties suitable for skin care. It offers quick absorption and exquisite skin feel.
Compliance Highlights Available
|
Request Sample |
| BIOGEL® Canola Butter | Phoenix Chemical, Inc. |
|
BIOGEL® Canola Butter is 100% vegetable derived and has a melting point of 40C. It is an ideal emollient for skin. This product is supplied as an off white soft paste.
Compliance Highlights Available
|
Request Sample |
| BIOGEL® Canola Butter FH | Phoenix Chemical, Inc. |
|
BIOGEL® Canola Butter FH is a 100% vegetable derived product supplied as off white hard flakes. It has a melting point of 70C. This product is used as an emollient for skin conditioning.
Compliance Highlights Available
|
Request Sample |
| BIOGEL® CASTOR OIL/FH | Phoenix Chemical, Inc. |
|
BIOGEL® CASTOR OIL/FH is a unique hydrogenated castor oil wax that is odorless and tasteless. It is used in the personal care and pharmaceutical industries, for various applications such as thickeners and opacifiers, improving the spreadability of antiper...view more
BIOGEL® CASTOR OIL/FH is a unique hydrogenated castor oil wax that is odorless and tasteless. It is used in the personal care and pharmaceutical industries, for various applications such as thickeners and opacifiers, improving the spreadability of antiperspirant, and improving water repellency. BIOGEL® CASTOR OIL/FH is sold in flake from with a relative high melting point of 85°C. Specific applications for BIOGEL® CASTOR OIL/FH are in antiperspirant sticks, sunscreens and lipsticks. view less
Compliance Highlights Available
|
Request Sample |
| BIOGEL® Hemp Seed Butter | Phoenix Chemical, Inc. |
|
BIOGEL® Hemp Seed Butter results from the controlled hydrogenation of Cannabis Sativa Seed Oil. It is 100% active and 100% vegetable derived. BIOGEL® Hemp Seed Butter functions as an emollient skin conditioning agent and in creams and lotions and also f...view more
BIOGEL® Hemp Seed Butter results from the controlled hydrogenation of Cannabis Sativa Seed Oil. It is 100% active and 100% vegetable derived. BIOGEL® Hemp Seed Butter functions as an emollient skin conditioning agent and in creams and lotions and also finds application in hair care products. BIOGEL® Hemp Seed Butter is not a blended product. view less
Compliance Highlights Unavailable
|
Request Sample |
| BIOGEL® Olive Butter | Phoenix Chemical, Inc. |
|
BIOGEL® Olive Butter is derived from olive oil. It offers excellent spreadability on skin. This product is ideal as a massage butter or body balm.
Compliance Highlights Available
|
Request Sample |
| BIOGEL® Pumpkin Seed Butter | Phoenix Chemical, Inc. |
|
BIOGEL® Pumpkin Seed Butter Pumpkin Seed Oil, known for its skin moisturizing properties is now available as BIOGEL® Pumpkin Seed Butter. BIOGEL Pumpkin Seed Butter results from the controlled hydrogenation of Cucurbita Pepo (Pumpkin Seed Oil). It is 100...view more
BIOGEL® Pumpkin Seed Butter Pumpkin Seed Oil, known for its skin moisturizing properties is now available as BIOGEL® Pumpkin Seed Butter. BIOGEL Pumpkin Seed Butter results from the controlled hydrogenation of Cucurbita Pepo (Pumpkin Seed Oil). It is 100% active and 100% vegetable derived. BIOGEL® Pumpkin Seed Butter also functions as an emollient skin conditioning product and is useful in hair dressing preparations. BIOGEL® Pumpkin Seed Butter is not a blended product. view less
Compliance Highlights Unavailable
|
Request Sample |
| BIOGEL® VLHS | Phoenix Chemical, Inc. |
|
BIOGEL® VLHS is a 100% active 100% vegetable-derived gel. It can be described as a vegetable-based petrolatum. BIOGEL® VLHS spreads easily on skin resulting in a glossy emollient non-tacky coating. It is useful in lip gloss and foundation products and w...view more
BIOGEL® VLHS is a 100% active 100% vegetable-derived gel. It can be described as a vegetable-based petrolatum. BIOGEL® VLHS spreads easily on skin resulting in a glossy emollient non-tacky coating. It is useful in lip gloss and foundation products and where occlusive moisturization are desired. BIOGEL® VLHS is sustainable, biodegradable, and environmentally friendly. It is generally soluble in esters and oils but not soluble in silicones or water. view less
Compliance Highlights Available
|
Request Sample |
| CATEMOL® 220-B | Phoenix Chemical, Inc. |
|
CATEMOL® 220-B is the behenic acid salt of behenamidopropyl dimethylamine and can be classified as a cationic organic salt, with a small amount of free behenic acid. This product can disperse readily in water and can be stabilized to form a lotion. In add...view more
CATEMOL® 220-B is the behenic acid salt of behenamidopropyl dimethylamine and can be classified as a cationic organic salt, with a small amount of free behenic acid. This product can disperse readily in water and can be stabilized to form a lotion. In addition, it acts as an effective dispersing agent for inorganic pigments (such as microfine TiO2) in w/o emulsions.
CATEMOL® 220-B can be applied in hair conditioners (leave in and rinse off), conditioning shampoos, creams and lotions, A/P systems and lip care products. view less
Compliance Highlights Available
|
Request Sample |
| CATEMOL® 360 | Phoenix Chemical, Inc. |
|
CATEMOL® 360 the reaction product of dilinoleic acid and dimethylaminopropylamine, is molecularity more than half vegetable derived with the remainder synthetic. It is a viscous, clear, difunctional amido-amine.
This product is cationic, having two te...view more
CATEMOL® 360 the reaction product of dilinoleic acid and dimethylaminopropylamine, is molecularity more than half vegetable derived with the remainder synthetic. It is a viscous, clear, difunctional amido-amine.
This product is cationic, having two tertiary amino groups, one at either end of the molecule. The molecule can be reacted to form a diquaternary or a difunctional salt, in situ, with a variety of organic acids. CATEMOL® 360 gives the formulator extreme flexibility in developing a conditioning solution; vegetable derived acids such as lauric or isostearic acids deserve consideration. In such systems, it will deposit on hair to improve manageability. This product can be applied in hair conditioners, water in oil emulsions and as a quaternary intermediate. view less
Compliance Highlights Available
|
Request Sample |
| CATEMOL® HBC-18 | Phoenix Chemical, Inc. |
|
CATEMOL® HBC-18 is a distearyl quaternary that gives softer hair conditioning compared to typical monoquats while at the same time imparting noticeable reduction in static charge and fly-away. In addition to its use in hair conditioners at 1-2% (both leav...view more
CATEMOL® HBC-18 is a distearyl quaternary that gives softer hair conditioning compared to typical monoquats while at the same time imparting noticeable reduction in static charge and fly-away. In addition to its use in hair conditioners at 1-2% (both leave-in and rinse-out), it finds application in conditioning shampoos, at 2-4%, mousses and waving lotions at similar use levels. view less
Compliance Highlights Available
|
Request Sample |
| CATEMOL® MMM | Phoenix Chemical, Inc. |
|
CATEMOL® MMM is a cocamidopropyl trimonium chloride quaternary; it is derived from a natural source (coconut oil). The presence of cocoamidopropyl moiety on the molecule confers a wide compatibility with anionic surfactants in addition to making it an exc...view more
CATEMOL® MMM is a cocamidopropyl trimonium chloride quaternary; it is derived from a natural source (coconut oil). The presence of cocoamidopropyl moiety on the molecule confers a wide compatibility with anionic surfactants in addition to making it an excellent conditioner. Since CATEMOL® MMM is cationic, it is very substantive and forms a monomolecular layer on the substrate.
Some of the commonly recommended applications include hair care products such as shampoos, hair conditioners and cream-rinses. CATEMOL® MMM, being a quaternary, also offers anti-static properties to the substrate thus in the case of hair treatment it is expected to mitigate static-flyaway and provide moisturization. view less
Compliance Highlights Available
|
Request Sample |
| CATEMOL® S-180-S | Phoenix Chemical, Inc. |
|
CATEMOL® S-180-S is a stearamidopropyl dimethyl amine complexed with stearic acid; it is derived from a natural source (rape seed oil). The combination of the moieties has a carbon chain length of 36, which makes it an excellent conditioner. Because this ...view more
CATEMOL® S-180-S is a stearamidopropyl dimethyl amine complexed with stearic acid; it is derived from a natural source (rape seed oil). The combination of the moieties has a carbon chain length of 36, which makes it an excellent conditioner. Because this product is cationic, it is very substantive and forms a monomolecular layer on the substrate. Some of the commonly recommended applications include skin creams and lotions, hair care products such as shampoos and hair conditioners, shaving creams, liquid soaps and soap bars. It is also used as a cationic emulsifier. view less
Compliance Highlights Available
|
Request Sample |
| CATEMOL® WPC | Phoenix Chemical, Inc. |
|
CATEMOL® WPC is a white, crystalline, quarternary compound. It can be chemically described as N(Stearoyl ColaminoformylMethyl) Pyridinium Chloride. This product can be applied as a substantive quaternary with excellent after feel on hands and skin, in aci...view more
CATEMOL® WPC is a white, crystalline, quarternary compound. It can be chemically described as N(Stearoyl ColaminoformylMethyl) Pyridinium Chloride. This product can be applied as a substantive quaternary with excellent after feel on hands and skin, in acid pH stable (pH 6.0 max.) formulations and as an emulsifying, conditioning, cleansing and emollient that is useful in creams, lotions, hair conditioners, hair conditioning rinses and hair grooming aids. view less
Compliance Highlights Available
|
Request Sample |
| CATEMOL® WPL | Phoenix Chemical, Inc. |
|
CATEMOL® WPL is a hair and skin conditioner. It imparts an excellent after feel on hands and skin.
Compliance Highlights Available
|
Request Sample |
| CORN PO4 PH B | AGRANA |
|
CORN PO4 PH "B“ is a special starch (phosphate cross-linked starch). It is ideal for use as a powder base for antimicrobial, disinfecting, astringent or keratolytic powder preparation like baby powder, lose face powders, body and foot powders, rouge, eye ...view more
CORN PO4 PH "B“ is a special starch (phosphate cross-linked starch). It is ideal for use as a powder base for antimicrobial, disinfecting, astringent or keratolytic powder preparation like baby powder, lose face powders, body and foot powders, rouge, eye shadow and compact powders. view less
Compliance Highlights Available
|
|
| COSCAP® G7-MC | Phoenix Chemical, Inc. |
|
COSCAP® G7-MC is the trimethyl ether of glycereth -7. This clear, 100% active light yellow liquid ester produces a slightly dry, silky emollience on the skin. Two properties that make COSCAP® G7-MC indispensable to the cosmetic chemist are its total water...view more
COSCAP® G7-MC is the trimethyl ether of glycereth -7. This clear, 100% active light yellow liquid ester produces a slightly dry, silky emollience on the skin. Two properties that make COSCAP® G7-MC indispensable to the cosmetic chemist are its total water-solubility and total solubility in castor oil. This property permits the introduction of water into certain anhydrous systems such as lipsticks. Additionally, COSCAP® G7-MC is hydrolytically stable over a wide pH range enabling the formulator to incorporate COSCAP® G7-MC in salicylic acid formulation as well as in high pH systems. Salicylic acid can be dissolved at 4.5 - 5.0 g. levels in 10 g. of COSCAP® G7-MC. COSCAP® G7-MC effectively eliminates or reduces tack in carbomer gels. COSCAP® G7-MC at 5% w/w in a carbomer-based gel helps to enhance the aesthetic qualities of the formulation by reducing or entirely eliminating the tacky transitional feel on hair or skin as the system dries down. view less
Compliance Highlights Available
|
Request Sample |
| DICOPAMINE® PC-35 | Phoenix Chemical, Inc. |
|
DICOPAMINE® PC-35 is a clear, water white aqueous solution of Cetrimonium Chloride and Dimethicone PEG-7 phosphate. It can easily fragranced, colored and thickened and offered as a finished product. This unique conditioning agent can be applied to both co...view more
DICOPAMINE® PC-35 is a clear, water white aqueous solution of Cetrimonium Chloride and Dimethicone PEG-7 phosphate. It can easily fragranced, colored and thickened and offered as a finished product. This unique conditioning agent can be applied to both condition hair and to bring the conditioner to the hair surface. view less
Compliance Highlights Available
|
Request Sample |
| D.S.A 7 | AGRANA |
|
D.S.A 7 is a physically modified, surface active rice starch with high adsorption for oil and fats and is has especially been developed for dry hair shampoo and powder buffer.
Compliance Highlights Available
|
|
| D.S.A 7 BLACK 15% | AGRANA |
|
D.S.A 7 BLACK 15% is a coloured compound of black iron oxide which is coated with silicone and physically modified, surface active rice starch with high adsorbing properties for dry hair shampoo. It can be diluted by mixing with regular white starch D.S.A...view more
D.S.A 7 BLACK 15% is a coloured compound of black iron oxide which is coated with silicone and physically modified, surface active rice starch with high adsorbing properties for dry hair shampoo. It can be diluted by mixing with regular white starch D.S.A 7. view less
Compliance Highlights Unavailable
|
|
| D.S.A 7 BLACK 25% | AGRANA |
|
D.S.A 7 BLACK 25% is a coloured compound of black iron oxide which is coated with silicone and physically modified, surface active rice starch with high adsorbing properties for dry hair shampoo.
Compliance Highlights Unavailable
|
|
| D.S.A 7 BROWN | AGRANA |
|
D.S.A 7 BROWN is a coloured compound of iron oxides which is coated with silicone and physically modified, surface active rice starch with high adsorbing properties for dry hair shampoo.
Compliance Highlights Unavailable
|
|
| D.S.A 7 Red | AGRANA |
|
D.S.A 7 Red is a coloured compound of red iron oxide which is coated with silicone and physically modified, surface active rice starch with high adsorbing properties for dry hair shampoo.
Compliance Highlights Unavailable
|
|
| D.S.A 7 YELLOW | AGRANA |
|
D.S.A 7 YELLOW is a coloured compound of iron oxides. The pure, specific yellow powder is coated with silicone and physically modified, surfache active rice starch and has high adsorbing properties for dry hair shampoo.
Compliance Highlights Unavailable
|
|
| GIOVAREZ® 1800 | Phoenix Chemical, Inc. |
|
GIOVAREZ® 1800 is the homopolymer of octadecyl vinyl ether. It is a 100% active, water insoluble, waxy, nonionic resin. Since it melts at about 45ºC, it can easily be incorporated into waxes where it can be utilized as a melting point depressant. It can b...view more
GIOVAREZ® 1800 is the homopolymer of octadecyl vinyl ether. It is a 100% active, water insoluble, waxy, nonionic resin. Since it melts at about 45ºC, it can easily be incorporated into waxes where it can be utilized as a melting point depressant. It can be applied in mascara for volumizing and water resistance, in lipstick to provide gloss, and to increase volume in hair products. Other uses are indicated in pencils and stick products. view less
Compliance Highlights Available
|
Request Sample |
| GIOVAREZ® AC-5099M | Phoenix Chemical, Inc. |
|
GIOVAREZ® AC-5099M a clear, almost water-white liquid, which dries to a glossy, continuous, hard, water-insoluble film. When formulated into cosmetic products, the polymer film becomes more flexible due to oils and esters present in the formulated product...view more
GIOVAREZ® AC-5099M a clear, almost water-white liquid, which dries to a glossy, continuous, hard, water-insoluble film. When formulated into cosmetic products, the polymer film becomes more flexible due to oils and esters present in the formulated product which acts as plasticizers for the acrylic film. GIOVAREZ® AC-5099M can be applied in mascara, eye liner pencils, coating and fillers, lipstick, make-up and barrier creams. view less
Compliance Highlights Available
|
Request Sample |
| GIOVAREZ® BTB-50 | Phoenix Chemical, Inc. |
|
GIOVAREZ® BTB-50 is 50% solution of an acrylic polymer (Alkyl Methacrylate Copolymer) in Permethyl™ 99A (Isododecane, Permethyl Corp.). It is a clear, almost water-white liquid, which dries to a glossy, clear, continuous, hard but flexible, water-insolubl...view more
GIOVAREZ® BTB-50 is 50% solution of an acrylic polymer (Alkyl Methacrylate Copolymer) in Permethyl™ 99A (Isododecane, Permethyl Corp.). It is a clear, almost water-white liquid, which dries to a glossy, clear, continuous, hard but flexible, water-insoluble film. When formulated into cosmetic products, the polymer film becomes more flexible due to oils and esters present in the formulated product which act as plasticizers for the acrylic film.
It can be applied in mascara, eye liner pencils, coating and fillers, lipstick, make-up, barrier cream, sunscreen and colostomy adhesive. view less
Compliance Highlights Available
|
Request Sample |
| Harpago PE | Intiki |
|
Harpago PE is a vacuum spray dried aqueous extract of Harpagophytum procumbens. The roots are sustainably wild-harvested from the desert regions of Namibia. The active compounds Harpagoside, 8-coumaroylharpagide and verbascoside, show dermal anti-inflamma...view more
Harpago PE is a vacuum spray dried aqueous extract of Harpagophytum procumbens. The roots are sustainably wild-harvested from the desert regions of Namibia. The active compounds Harpagoside, 8-coumaroylharpagide and verbascoside, show dermal anti-inflammatory action and are suitable for sensitive skin. view less
Compliance Highlights Unavailable
|
|
| Indopol® H-100 | INEOS Oligomers |
|
Indopol® H-100 is a uniquely versatile liquid polybutene polymer. Indopol polybutenes (polyisobutene, PB, PIB) are available in a wide range of viscosity grades. This grade has a honey-like consistency. All grades are clear/colorless, hydrophobic, non-dry...view more
Indopol® H-100 is a uniquely versatile liquid polybutene polymer. Indopol polybutenes (polyisobutene, PB, PIB) are available in a wide range of viscosity grades. This grade has a honey-like consistency. All grades are clear/colorless, hydrophobic, non-drying, inherently tacky and compatible with a wide range of organic materials. view less
Compliance Highlights Unavailable
|
|
| Indopol® H-1200 | INEOS Oligomers |
|
Indopol® H-1200 is a uniquely versatile liquid polybutene polymer. Indopol polybutenes (polyisobutene, PB, PIB) are available in a wide range of viscosity grades. This grade has a honey-like consistency. All grades are clear/colorless, hydrophobic, non-dr...view more
Indopol® H-1200 is a uniquely versatile liquid polybutene polymer. Indopol polybutenes (polyisobutene, PB, PIB) are available in a wide range of viscosity grades. This grade has a honey-like consistency. All grades are clear/colorless, hydrophobic, non-drying, inherently tacky and compatible with a wide range of organic materials. view less
Compliance Highlights Unavailable
|
|
| Indopol® H-15 | INEOS Oligomers |
|
Indopol® H-15 is a uniquely versatile liquid polybutene polymer. Indopol polybutenes (polyisobutene, PB, PIB) are available in a wide range of viscosity grades. This grade is a free-flowing liquid. All grades are clear/colorless, hydrophobic, non-drying, ...view more
Indopol® H-15 is a uniquely versatile liquid polybutene polymer. Indopol polybutenes (polyisobutene, PB, PIB) are available in a wide range of viscosity grades. This grade is a free-flowing liquid. All grades are clear/colorless, hydrophobic, non-drying, inherently tacky and compatible with a wide range of organic materials. view less
Compliance Highlights Unavailable
|
|
| Indopol® H-1500 | INEOS Oligomers |
|
Indopol® H-1500 is a uniquely versatile liquid polybutene polymer. Indopol polybutenes (polyisobutene, PB, PIB) are available in a wide range of viscosity grades. This grade has a honey-like consistency. All grades are clear/colorless, hydrophobic, non-dr...view more
Indopol® H-1500 is a uniquely versatile liquid polybutene polymer. Indopol polybutenes (polyisobutene, PB, PIB) are available in a wide range of viscosity grades. This grade has a honey-like consistency. All grades are clear/colorless, hydrophobic, non-drying, inherently tacky and compatible with a wide range of organic materials. view less
Compliance Highlights Unavailable
|
|
| Indopol® H-18000 | INEOS Oligomers |
|
Indopol® H-18000 is a uniquely versatile liquid polybutene polymer. Indopol polybutenes (polyisobutene, PB, PIB) are available in a wide range of viscosity grades. This grade is a semi-solid material. All grades are clear/colorless, hydrophobic, non-dryin...view more
Indopol® H-18000 is a uniquely versatile liquid polybutene polymer. Indopol polybutenes (polyisobutene, PB, PIB) are available in a wide range of viscosity grades. This grade is a semi-solid material. All grades are clear/colorless, hydrophobic, non-drying, inherently tacky and compatible with a wide range of organic materials. view less
Compliance Highlights Unavailable
|
|
| Indopol® H-1900 | INEOS Oligomers |
|
Indopol® H-1900 is a uniquely versatile liquid polybutene polymer. Indopol polybutenes (polyisobutene, PB, PIB) are available in a wide range of viscosity grades. This grade has a honey-like consistency. All grades are clear/colorless, hydrophobic, non-dr...view more
Indopol® H-1900 is a uniquely versatile liquid polybutene polymer. Indopol polybutenes (polyisobutene, PB, PIB) are available in a wide range of viscosity grades. This grade has a honey-like consistency. All grades are clear/colorless, hydrophobic, non-drying, inherently tacky and compatible with a wide range of organic materials. view less
Compliance Highlights Unavailable
|
|
| Indopol® H-2100 | INEOS Oligomers |
|
Indopol® H-2100 is a uniquely versatile liquid polybutene polymer. Indopol polybutenes (polyisobutene, PB, PIB) are available in a wide range of viscosity grades. This grade has a honey-like consistency. All grades are clear/colorless, hydrophobic, non-dr...view more
Indopol® H-2100 is a uniquely versatile liquid polybutene polymer. Indopol polybutenes (polyisobutene, PB, PIB) are available in a wide range of viscosity grades. This grade has a honey-like consistency. All grades are clear/colorless, hydrophobic, non-drying, inherently tacky and compatible with a wide range of organic materials. view less
Compliance Highlights Unavailable
|
|
| Indopol® H-25 | INEOS Oligomers |
|
Indopol® H-25 is a uniquely versatile liquid polybutene polymer. Indopol polybutenes (polyisobutene, PB, PIB) are available in a wide range of viscosity grades. This grade is a free-flowing liquid. All grades are clear/colorless, hydrophobic, non-drying, ...view more
Indopol® H-25 is a uniquely versatile liquid polybutene polymer. Indopol polybutenes (polyisobutene, PB, PIB) are available in a wide range of viscosity grades. This grade is a free-flowing liquid. All grades are clear/colorless, hydrophobic, non-drying, inherently tacky and compatible with a wide range of organic materials. view less
Compliance Highlights Unavailable
|
|
| Indopol® H-300 | INEOS Oligomers |
|
Indopol® H-300 is a uniquely versatile liquid polybutene polymer. Indopol polybutenes (polyisobutene, PB, PIB) are available in a wide range of viscosity grades. This grade has a honey-like consistency. All grades are clear/colorless, hydrophobic, non-dry...view more
Indopol® H-300 is a uniquely versatile liquid polybutene polymer. Indopol polybutenes (polyisobutene, PB, PIB) are available in a wide range of viscosity grades. This grade has a honey-like consistency. All grades are clear/colorless, hydrophobic, non-drying, inherently tacky and compatible with a wide range of organic materials. view less
Compliance Highlights Unavailable
|
|
| Indopol® H-50 | INEOS Oligomers |
|
Indopol® H-50 is a uniquely versatile liquid polybutene polymer. Indopol polybutenes (polyisobutene, PB, PIB) are available in a wide range of viscosity grades. This grade is a free-flowing liquid. All grades are clear/colorless, hydrophobic, non-drying, ...view more
Indopol® H-50 is a uniquely versatile liquid polybutene polymer. Indopol polybutenes (polyisobutene, PB, PIB) are available in a wide range of viscosity grades. This grade is a free-flowing liquid. All grades are clear/colorless, hydrophobic, non-drying, inherently tacky and compatible with a wide range of organic materials. view less
Compliance Highlights Unavailable
|
|
| Indopol® H-6000 | INEOS Oligomers |
|
Indopol® H-6000 is a uniquely versatile liquid polybutene polymer. Indopol polybutenes (polyisobutene, PB, PIB) are available in a wide range of viscosity grades. This grade is a semi-solid material. All grades are clear/colorless, hydrophobic, non-drying...view more
Indopol® H-6000 is a uniquely versatile liquid polybutene polymer. Indopol polybutenes (polyisobutene, PB, PIB) are available in a wide range of viscosity grades. This grade is a semi-solid material. All grades are clear/colorless, hydrophobic, non-drying, inherently tacky and compatible with a wide range of organic materials. view less
Compliance Highlights Unavailable
|
|
| Indopol® H-7 | INEOS Oligomers |
|
Indopol® H-7 is a uniquely versatile liquid polybutene polymer. Indopol polybutenes (polyisobutene, PB, PIB) are available in a wide range of viscosity grades. This grade is a free-flowing liquid. All grades are clear/colorless, hydrophobic, non-drying, ...view more
Indopol® H-7 is a uniquely versatile liquid polybutene polymer. Indopol polybutenes (polyisobutene, PB, PIB) are available in a wide range of viscosity grades. This grade is a free-flowing liquid. All grades are clear/colorless, hydrophobic, non-drying, inherently tacky and compatible with a wide range of organic materials. view less
Compliance Highlights Unavailable
|
|
| Indopol® H-8 | INEOS Oligomers |
|
Indopol® H-8 is a uniquely versatile liquid polybutene polymer. Indopol polybutenes (polyisobutene, PB, PIB) are available in a wide range of viscosity grades. This grade is a free-flowing liquid. All grades are clear/colorless, hydrophobic, non-drying, i...view more
Indopol® H-8 is a uniquely versatile liquid polybutene polymer. Indopol polybutenes (polyisobutene, PB, PIB) are available in a wide range of viscosity grades. This grade is a free-flowing liquid. All grades are clear/colorless, hydrophobic, non-drying, inherently tacky and compatible with a wide range of organic materials. view less
Compliance Highlights Unavailable
|
|
| Indopol® L-14 | INEOS Oligomers |
|
Indopol® L-14 is a uniquely versatile liquid polybutene polymer. Indopol polybutenes (polyisobutene, PB, PIB) are available in a wide range of viscosity grades. This grade is a free-flowing liquid. All grades are clear/colorless, hydrophobic, non-drying, ...view more
Indopol® L-14 is a uniquely versatile liquid polybutene polymer. Indopol polybutenes (polyisobutene, PB, PIB) are available in a wide range of viscosity grades. This grade is a free-flowing liquid. All grades are clear/colorless, hydrophobic, non-drying, inherently tacky and compatible with a wide range of organic materials. view less
Compliance Highlights Unavailable
|
|
| Indopol® L-6 | INEOS Oligomers |
|
Indopol® L-6 is a uniquely versatile liquid polybutene polymer. Indopol polybutenes (polyisobutene, PB, PIB) are available in a wide range of viscosity grades. This grade is a free-flowing liquid. All grades are clear/colorless, hydrophobic, non-drying, i...view more
Indopol® L-6 is a uniquely versatile liquid polybutene polymer. Indopol polybutenes (polyisobutene, PB, PIB) are available in a wide range of viscosity grades. This grade is a free-flowing liquid. All grades are clear/colorless, hydrophobic, non-drying, inherently tacky and compatible with a wide range of organic materials. view less
Compliance Highlights Unavailable
|
|
| Isododecane | INEOS Oligomers |
|
Isododecane is a clear, colorless, volatile, and odorless liquid. It provides a light, non-oily feel with little residue and excellent solvency. With a viscosity of approximately 1 centipoise, it can be used in applications which include: hair care, sun c...view more
Isododecane is a clear, colorless, volatile, and odorless liquid. It provides a light, non-oily feel with little residue and excellent solvency. With a viscosity of approximately 1 centipoise, it can be used in applications which include: hair care, sun care, antiperspirants, color cosmetics, mascaras and fragrance products. view less
Compliance Highlights Unavailable
|
|
| Isoeicosane | INEOS Oligomers |
|
Isoeicosane is a clear, colorless, and odorless liquid providing a satiny feel to the skin. The liquid can be used to produce a high sheen and can effectively plasticize mascaras. Applications for use include: skin care, hair care, sun care and color cosm...view more
Isoeicosane is a clear, colorless, and odorless liquid providing a satiny feel to the skin. The liquid can be used to produce a high sheen and can effectively plasticize mascaras. Applications for use include: skin care, hair care, sun care and color cosmetics. view less
Compliance Highlights Unavailable
|
|
| Isohexadecane | INEOS Oligomers |
|
Isohexadecane is a clear, colorless, and odorless liquid providing high emolliency, ease of spreadability and moisturizing properties. It imparts a non-drying feel on the skin and has a light, smooth feel with excellent cleansing characteristics. Applicat...view more
Isohexadecane is a clear, colorless, and odorless liquid providing high emolliency, ease of spreadability and moisturizing properties. It imparts a non-drying feel on the skin and has a light, smooth feel with excellent cleansing characteristics. Applications for use include: face and eye make-up cleansers, skin care, sun care, color cosmetics, bath oils and foundation creams. view less
Compliance Highlights Unavailable
|
|
| Isooctane100 | INEOS Oligomers |
|
Isooctane100 is a clear, colorless, volatile and odorless liquid. Due to its high evaporative properties, it is an excellent solvent choice when quick drying properties are required. Applications for use include nail care and nail polish formulations.
Compliance Highlights Unavailable
|
|
| Kiga PE | Intiki |
|
Kiga PE is used in skincare products for its firming and elasticity effect.
Compliance Highlights Unavailable
|
|
| MAISITA 21.001 | AGRANA |
|
MAISITA 21.001 is produced by mashing, washing and drying of corn. This white to yellowish, floury powder is ideal for use in the personal care and cosmetics industry.
Compliance Highlights Available
|
|
| MAISITA 21.003 | AGRANA |
|
MAISITA 21.003 is a specially processed corn (= maize) starch obtained from the caryopsis of Zea Mays L. This starch corresponds fully to European Pharmacopeia (EP) and United States Pharmacopeia (USP) in the relevant version.
Compliance Highlights Available
|
|
| MAISITA 9040 | AGRANA |
|
MAISITA 9040 is a heat-treated corn starch. It is produced by mashing, washing and drying of corn followed by heat-treatment to reach a low plate count.
Compliance Highlights Available
|
|
| MAISITA 9060 | AGRANA |
|
MAISITA 9060 is an organic heat-treated corn starch produced by mashing, washing and drying of organic corn followed by heat- treatment to reach a low plate count.
Compliance Highlights Available
|
|
| MAIZE-STYLE ORGANIC | AGRANA |
|
MAIZE-STYLE ORGANIC is a viscosity reduced, good cold water-soluble maize starch with excellent film forming properties replacing PVP (= Polyvinylpyrrolidon) in styling products. MAIZE-STYLE ORGANIC is not edible, only for NON-FOOD USE.
Compliance Highlights Available
|
|
| Myro PE | Intiki |
|
Myro PE is a vacuum spray dried aqueous extract of Myrothamnus flabellifolia, commonly known as the “resurrection plant”. It has been shown to increase skin hydration and calm irritated skin. This antioxidant and polyphenol rich active, is organic complia...view more
Myro PE is a vacuum spray dried aqueous extract of Myrothamnus flabellifolia, commonly known as the “resurrection plant”. It has been shown to increase skin hydration and calm irritated skin. This antioxidant and polyphenol rich active, is organic compliant and sustainably wild-harvested in Namibia. view less
Compliance Highlights Unavailable
|
|
| NEOPRO® W-40 | Phoenix Chemical, Inc. |
|
NEOPRO® W-40 is a uniquely hydrolyzed wheat protein derivative. It is the diester reaction product of hydrolyzed wheat protein and PEG-20 and is offered as a 40% solution in water. The free protein amino groups optimize substantivity to hair while the est...view more
NEOPRO® W-40 is a uniquely hydrolyzed wheat protein derivative. It is the diester reaction product of hydrolyzed wheat protein and PEG-20 and is offered as a 40% solution in water. The free protein amino groups optimize substantivity to hair while the ester group holds PEG-20 to the hair shaft. The overall effect is enhanced moisturization, substantivity and manageability. It can be applied in hair conditioners, shampoo conditioners and in hair hydrating formulas. view less
Compliance Highlights Available
|
Request Sample |
| Organic Tapioca Natural | AGRANA |
|
Organic Tapioca Natural is an organic native tapioca starch with low plate count. This white to off-white free flowing powder is ideal for use in the personal care and cosmetics industry.
Compliance Highlights Available
|
|
| Panalane® H-300E | INEOS Oligomers |
|
Panalane® H-300E is hydrogenated polybutene. It is a versatile cosmetic ingredient ideal for a wide variety of personal care products. Panalane® is available in low and high viscosity grades that are easily blendable (L-14E and H-300E).
Compliance Highlights Unavailable
|
|
| Panalane® L-14E | INEOS Oligomers |
|
Panalane® L-14E is hydrogenated polybutene. It is a versatile cosmetic ingredient ideal for a wide variety of personal care products. Panalane® is available in low and high viscosity grades that are easily blendable (L-14E and H-300E).
Compliance Highlights Unavailable
|
|
| PECOREZ® AC-50 | Phoenix Chemical, Inc. |
|
PECOREZ® AC-50 forms a clear, hard, smooth, glossy, non-yellowing film. It is used for nail enamels.
Compliance Highlights Unavailable
|
Request Sample |
| PECOREZ® AC-50E | Phoenix Chemical, Inc. |
|
PECOREZ® AC-50E forms a clear, hard, smooth, glossy, non-yellowing film. It is used for nail enamels.
Compliance Highlights Unavailable
|
Request Sample |
| PECOSIL® AD-3640 | Phoenix Chemical, Inc. |
|
PECOSIL® AD-3640 are silicone quaternaries that are 40% active in water. They can be described as chemically homologous. Although these silicone quarternaries can be considered mild conditioners PECOSIL® AD-3640 will tend to give heavier conditioning than...view more
PECOSIL® AD-3640 are silicone quaternaries that are 40% active in water. They can be described as chemically homologous. Although these silicone quarternaries can be considered mild conditioners PECOSIL® AD-3640 will tend to give heavier conditioning than PECOSILCA-1240. This product can be applied as mild conditioners to provide softness, manageability and sheen, restoring natural brilliance to hair. view less
Compliance Highlights Available
|
Request Sample |
| PECOSIL® ARS-09 | Phoenix Chemical, Inc. |
|
PECOSIL® ARS-09 is a series of alkyl or alkyl aryl polydimethyll siloxane waxes. This product produces wax of different consistency which modify feel and import various properties to cosmetic properties. It can be applied to improves mold release for lips...view more
PECOSIL® ARS-09 is a series of alkyl or alkyl aryl polydimethyll siloxane waxes. This product produces wax of different consistency which modify feel and import various properties to cosmetic properties. It can be applied to improves mold release for lipstick and soap bars, is a bonding agent for hot pour or pressed powder, application where "slip" is desirable, imparting barrier properties to enhance moisturizing in creams, lotions, water resistance in sun screen products, and high gloss in lipsticks. view less
Compliance Highlights Available
|
Request Sample |
| PECOSIL® ARS-12 | Phoenix Chemical, Inc. |
|
PECOSIL® ARS-12 can be described as a series of alkyl or alkyl aryl polydimethyll siloxane waxes. It produces wax of different consistency which can modify the feel and import various properties to cosmetic properties.
This product can be applied to i...view more
PECOSIL® ARS-12 can be described as a series of alkyl or alkyl aryl polydimethyll siloxane waxes. It produces wax of different consistency which can modify the feel and import various properties to cosmetic properties.
This product can be applied to improves mold release for lipstick and soap bars, is a bonding agent for hot pour or pressed powder, application where "slip" is desirable, imparting barrier properties to enhance moisturizing in creams, lotions, water resistance in sun screen products, and high gloss in lipsticks. view less
Compliance Highlights Unavailable
|
Request Sample |
| PECOSIL® AS-16 | Phoenix Chemical, Inc. |
|
PECOSIL® AS-16 is a series of alkyl or alkyl aryl polydimethyll siloxane waxes. It produces wax of different consistency which can modify the feel and import various properties to cosmetic properties.
This product can be applied to improves mold relea...view more
PECOSIL® AS-16 is a series of alkyl or alkyl aryl polydimethyll siloxane waxes. It produces wax of different consistency which can modify the feel and import various properties to cosmetic properties.
This product can be applied to improves mold release for lipstick and soap bars, is a bonding agent for hot pour or pressed powder, application where "slip" is desirable, imparting barrier properties to enhance moisturizing in creams, lotions, water resistance in sun screen products, and high gloss in lipsticks. view less
Compliance Highlights Available
|
Request Sample |
| PECOSIL® AS-18 | Phoenix Chemical, Inc. |
|
PECOSIL® AS-18 can be described as a series of alkyl or alkyl aryl polydimethyll siloxane waxes. It produces wax of different consistency which can modify the feel and import various properties to cosmetic properties.
This product can be applied to im...view more
PECOSIL® AS-18 can be described as a series of alkyl or alkyl aryl polydimethyll siloxane waxes. It produces wax of different consistency which can modify the feel and import various properties to cosmetic properties.
This product can be applied to improves mold release for lipstick and soap bars, is a bonding agent for hot pour or pressed powder, application where "slip" is desirable, imparting barrier properties to enhance moisturizing in creams, lotions, water resistance in sun screen products, and high gloss in lipsticks. view less
Compliance Highlights Available
|
Request Sample |
| PECOSIL® AS-22 | Phoenix Chemical, Inc. |
|
PECOSIL® AS-22 is a series of alkyl or alkyl aryl polydimethyll siloxane waxes. It produces wax of different consistency which can modify the feel and import various properties to cosmetic properties.
PECOSIL® AS-22 can be applied to improves mold rel...view more
PECOSIL® AS-22 is a series of alkyl or alkyl aryl polydimethyll siloxane waxes. It produces wax of different consistency which can modify the feel and import various properties to cosmetic properties.
PECOSIL® AS-22 can be applied to improves mold release for lipstick and soap bars, is a bonding agent for hot pour or pressed powder, application where "slip" is desirable, imparting barrier properties to enhance moisturizing in creams, lotions, water resistance in sun screen products, and high gloss in lipsticks. view less
Compliance Highlights Unavailable
|
Request Sample |
| PECOSIL® AS-26 | Phoenix Chemical, Inc. |
|
PECOSIL® AS-26 can be described as a series of alkyl or alkyl aryl polydimethyll siloxane waxes. It produces wax of different consistency which can modify the feel and import various properties to cosmetic properties.
This product can be applied to im...view more
PECOSIL® AS-26 can be described as a series of alkyl or alkyl aryl polydimethyll siloxane waxes. It produces wax of different consistency which can modify the feel and import various properties to cosmetic properties.
This product can be applied to improves mold release for lipstick and soap bars, is a bonding agent for hot pour or pressed powder, application where "slip" is desirable, imparting barrier properties to enhance moisturizing in creams, lotions, water resistance in sun screen products, and high gloss in lipsticks. view less
Compliance Highlights Available
|
Request Sample |
| PECOSIL® C8ES | Phoenix Chemical, Inc. |
|
PECOSIL® C8ES is a clear, light yellow liquid that is reactive to pigments, providing an alkysilicone hydrophobic coating. It also improves pigment dispersibility in organic media.
Compliance Highlights Available
|
Request Sample |
| PECOSIL® CA-1240 | Phoenix Chemical, Inc. |
|
PECOSIL® CA-1240 are silicone quaternaries that are 40% active in water. They can be described as chemically homologous and is the reaction product of cocamidopropyldimethylamine and DimethiconePEG-7 acetyl chloride. This product can be applied in a mild ...view more
PECOSIL® CA-1240 are silicone quaternaries that are 40% active in water. They can be described as chemically homologous and is the reaction product of cocamidopropyldimethylamine and DimethiconePEG-7 acetyl chloride. This product can be applied in a mild conditioner to provide softness, manageability and sheen and to restore natural brilliance to hair. view less
Compliance Highlights Unavailable
|
Request Sample |
| PECOSIL® DB | Phoenix Chemical, Inc. |
|
PECOSIL® DB is a 100% active silicone ester. It is offered as a soft paste melting about 63˚C. It is extremely emollient and can be aptly described as luxurious in feel. This product is hydrophobic and occlusive. PECOSIL® DB is insoluble in castor oil, pr...view more
PECOSIL® DB is a 100% active silicone ester. It is offered as a soft paste melting about 63˚C. It is extremely emollient and can be aptly described as luxurious in feel. This product is hydrophobic and occlusive. PECOSIL® DB is insoluble in castor oil, propylene glycol, ethanol and cyclomethicone.
It can be applied in mascaras, make-up products, hair conditioners, conditioning shampoos, lipstick and lip products, emollient skin creams, skin barrier creams and ethnic products. view less
Compliance Highlights Unavailable
|
Request Sample |
| PECOSIL® DCF-12 | Phoenix Chemical, Inc. |
|
PECOSIL® DCF-12 is a polymeric Dimethicone Copolyol fluid containing an average of 12 mols of ethylene oxide. It has been especially treated to eliminate odor-causing components. This product finds application in a broad range of cosmetic products functio...view more
PECOSIL® DCF-12 is a polymeric Dimethicone Copolyol fluid containing an average of 12 mols of ethylene oxide. It has been especially treated to eliminate odor-causing components. This product finds application in a broad range of cosmetic products functioning as a wetting agent, emulsifier and foam builder. view less
Compliance Highlights Available
|
Request Sample |
| PECOSIL® DCF-1818 | Phoenix Chemical, Inc. |
|
PECOSIL® DCF-1818 can be described as a polymeric Dimethicone Copolyol fluid containing an average of 18 mols propylene oxide (EO/PO). It has been especially treated to eliminate odor-causing components. This product can be applied in a broad range of cos...view more
PECOSIL® DCF-1818 can be described as a polymeric Dimethicone Copolyol fluid containing an average of 18 mols propylene oxide (EO/PO). It has been especially treated to eliminate odor-causing components. This product can be applied in a broad range of cosmetic products and functions as a emulsifier and wetting agent and is cost effective. PECOSIL® DCF-1818 will tend to deposit on hair and leave a light, conditioned appearance. view less
Compliance Highlights Available
|
Request Sample |
| PECOSIL® DCU | Phoenix Chemical, Inc. |
|
PECOSIL® DCU is a clear, liquid, 100% active silicone ester that can function as a silicone-water coupling agent. In addition to imparting silicone emolliency and "cushion" in skin formulations, it possesses the special property of being miscible with bot...view more
PECOSIL® DCU is a clear, liquid, 100% active silicone ester that can function as a silicone-water coupling agent. In addition to imparting silicone emolliency and "cushion" in skin formulations, it possesses the special property of being miscible with both water and castor oil. PECOSIL® DCU can be applied in creams and lotions, lipstick and lip products, fragrances, nail conditioning products, make-up products, aerosol systems and bath products. view less
Compliance Highlights Unavailable
|
Request Sample |
| PECOSIL® FDM-30 | Phoenix Chemical, Inc. |
|
PECOSIL® FDM-30 is a soluble fluoro silicone fluid that exhibits foaming properties in water. This product is a non-tacky and is easily spreadable, substantive, occlusive and leaves the skin with a soft cushion. As well as being miscible in water (soluble...view more
PECOSIL® FDM-30 is a soluble fluoro silicone fluid that exhibits foaming properties in water. This product is a non-tacky and is easily spreadable, substantive, occlusive and leaves the skin with a soft cushion. As well as being miscible in water (soluble in all proportions), it is also miscible in propylene glycol and soluble in warn castor oil.
This product can be applied in sunscreen, shampoos, conditioners, bath products, skin creams and lotions, shaving products, lipsticks and make-up. view less
Compliance Highlights Available
|
Request Sample |
| PECOSIL® FSH-150 | Phoenix Chemical, Inc. |
|
PECOSIL® FSH-150 is a flourosilicone that is both hydrophobic and oleophobic. Its materials have a lighter, more lubricious and satiny skin-feel.
This product can be applied in sunscreen for sweat proof products (oil repellency), hair shampoos and cond...view more
PECOSIL® FSH-150 is a flourosilicone that is both hydrophobic and oleophobic. Its materials have a lighter, more lubricious and satiny skin-feel.
This product can be applied in sunscreen for sweat proof products (oil repellency), hair shampoos and conditioners for sebum control and quick drying. In cosmetics it would contribute to long wear cosmetics, particularly foundations and blushes. Use is also recommend in long wear lipsticks where their hydrophobic and oleophobic nature produces desire results. view less
Compliance Highlights Available
|
Request Sample |
