| Resinate® C1051-60 (BA80) Polyol for Direct to Metal Coatings | Resinate Materials Group, Inc. | Resinate® C1051-60 (BA80) is an aromatic polyester polyol made with 60% recycled and renewable content on a solids basis. This polyol is supplied at 80% solids in n-butyl acetate. Good balance of hardness and flexibility, excellent corrosion protection, ...view more Resinate® C1051-60 (BA80) is an aromatic polyester polyol made with 60% recycled and renewable content on a solids basis. This polyol is supplied at 80% solids in n-butyl acetate. Good balance of hardness and flexibility, excellent corrosion protection, 60% recycled and renewable content. view less | |
| 6031 | GIMEL Technical Materials | 6031 is a trifunctional polyester acrylate used in inks and coatings for glass and metal. It has excellent adhesion to glass and metal with good pigment wetting and boiling water resistance. | Request Sample |
| EXOCOAT™ AC | Axcentive Sarl | EXOCOAT® AC by Axcentive is a hybrid sol-gel resin for anti-corrosive conversion coatings in 60% ethanol. It is covalently bonded to the surface and applied directly to metal (iron alloy, galvanized steel, phosphate steel, stainless steel, and aluminum). ...view more EXOCOAT® AC by Axcentive is a hybrid sol-gel resin for anti-corrosive conversion coatings in 60% ethanol. It is covalently bonded to the surface and applied directly to metal (iron alloy, galvanized steel, phosphate steel, stainless steel, and aluminum). It functions as a replacement for the Cr3+ and Cr6+ based system as used in metal plating and automotive industries. It converts the metal hydroxide surface into a stable, inert covalently bound monolayer. It can also be used as micrometer-thin primers under conventional organic coatings. It can be overcoated by epoxy primer or polyurethane topcoat systems. EXOCOAT® AC is suitable for conventional low & high pressure airless and air-mixing spraying, dipping, rolling, and brushing. It has a shelf life of 12 months. view less | |
| Nichigo-Polyester LP033 | Nippon Gohsei | Nichigo-Polyester LP033 is a high molecular weight saturated polyester resin featuring good metal adhesion. This product is well suited for use in coatings, primers, laminates, and polyester adhesives. | |
| 2402 | GIMEL Technical Materials | 2402 is a difunctional aliphatic urethane acrylate used in adhesives and plastic coatings. It has a stretch rate up to 200% with high toughness and excellent adhesion to glass and metal. | Request Sample |
| EPOSOL AP 100 | Benasedo | EPOSOL AP 100 is a special additive improving the adhesion and the elasticity in baking enamel for metal substrates. It is stable in colour and doesn’t have any influence on weather resistance properties of the paints. | |
| HS9301 | Tianyi Chemical Engineering Material Co., Ltd. | HS9301, in the form of a transparent resin, is a pure acrylate resin that can be used in vacuum plating surface paints, top coating varnishes, or metal UV paints. This product is soluble in active monomers or inert solvents. | |
| PAP-110 | FTC Korea Co.,Ltd | PAP-110 has excellent adhesion and weatherability (non-yellowing) properties. It also shows good chemical resistance and good solubility. It is suitable for use in metal adhesion for paint and lacquer, organic solvent-borne and water-borne paints, and tex...view more PAP-110 has excellent adhesion and weatherability (non-yellowing) properties. It also shows good chemical resistance and good solubility. It is suitable for use in metal adhesion for paint and lacquer, organic solvent-borne and water-borne paints, and textile fabrics. view less | Request Sample |
| HS9301B | Tianyi Chemical Engineering Material Co., Ltd. | HS9301B, in the form of a transparent resin, is a pure acrylate resin that can be used in UV cured coatings, paper coatings, wooden coatings, metal coatings, or UV inks. This product is soluble in active monomers or inert solvents. | |
| HS9303B | Tianyi Chemical Engineering Material Co., Ltd. | HS9303B, in the form of a transparent resin, is a pure acrylate resin that can be used in UV-cured coatings like paper coatings, wooden coatings, metal coatings, or UV inks. This product is soluble in active monomers or inert solvents. | |
| 6372 | GIMEL Technical Materials | 6372 is a modified polyester acrylate used in plastic coatings and inks. It has a fast curing response with good adhesion to plastic and metal, good pigment-wetting with a low misting, and good fluidity with very good printing performance. | Request Sample |
| SHIKOH™ UV-3000B | Nippon Gohsei | SHIKOH™ UV-3000B is a soft-and-elastic-type, UV-curable urethane acrylate oligomer resin featuring good rubber elasticity. This product is well suited for use in applications such as metal undercoats and primers, plastic and electronic coatings, and adhes...view more SHIKOH™ UV-3000B is a soft-and-elastic-type, UV-curable urethane acrylate oligomer resin featuring good rubber elasticity. This product is well suited for use in applications such as metal undercoats and primers, plastic and electronic coatings, and adhesive films and labels. view less | |
| SHIKOH™ UV-3200B | Nippon Gohsei | SHIKOH™ UV-3200B is a soft-and-elastic-type, UV-curable urethane acrylate oligomer resin featuring good rubber elasticity. This product is well suited for use in applications such as metal undercoats and primers, plastic and electronic coatings, and adhes...view more SHIKOH™ UV-3200B is a soft-and-elastic-type, UV-curable urethane acrylate oligomer resin featuring good rubber elasticity. This product is well suited for use in applications such as metal undercoats and primers, plastic and electronic coatings, and adhesive films and labels. view less | |
| SHIKOH™ UV-3500BA | Nippon Gohsei | SHIKOH™ UV-3500BA is a soft-and-elastic-type, UV-curable urethane acrylate oligomer resin, diluted in butyl acetate. Featuring exceptional strength, this product is well suited for use in applications such as metal undercoats and primers, plastic and elec...view more SHIKOH™ UV-3500BA is a soft-and-elastic-type, UV-curable urethane acrylate oligomer resin, diluted in butyl acetate. Featuring exceptional strength, this product is well suited for use in applications such as metal undercoats and primers, plastic and electronic coatings, adhesive films and labels. view less | |
| SHIKOH™ UV-3300B | Nippon Gohsei | SHIKOH™ UV-3300B is a soft-and-elastic-type, UV-curable urethane acrylate oligomer resin featuring high elongation and good rubber elasticity. This product is well suited for use in metal undercoats and primers, plastic and electronic coatings, adhesive f...view more SHIKOH™ UV-3300B is a soft-and-elastic-type, UV-curable urethane acrylate oligomer resin featuring high elongation and good rubber elasticity. This product is well suited for use in metal undercoats and primers, plastic and electronic coatings, adhesive films and labels, and optical applications. view less | |
| EPS® 2585 | EPS Materials | EPS® 2585 is a high solids acrylic emulsion for <100g/L VOC direct-to-metal (DTM) applications. Typical performance of EPS 2585 include hardness, flexibility, and corrosion resistance. This polymer can be used for exterior applications as it offers gloss ...view more EPS® 2585 is a high solids acrylic emulsion for <100g/L VOC direct-to-metal (DTM) applications. Typical performance of EPS 2585 include hardness, flexibility, and corrosion resistance. This polymer can be used for exterior applications as it offers gloss retention and adhesion to multiple substrates. view less | Request Sample |
| Resinate® A2551-100 Polyol for Solventless 2k Adhesives | Resinate Materials Group, Inc. | Resinate® A2551-100 is a developmental polyester polyol made with 99.9% recycled and renewable content. It is ideal for solventless 2k or moisture cure adhesive applications where superior adhesion performance on plastic and metal substrates is required. ...view more Resinate® A2551-100 is a developmental polyester polyol made with 99.9% recycled and renewable content. It is ideal for solventless 2k or moisture cure adhesive applications where superior adhesion performance on plastic and metal substrates is required. Long pot life, low viscosity, excellent water and chemical resistance. view less | |
| Polurene M 75 | S.A.P.I.C.I. SpA | Polurene M 75 is an aliphatic polyisocyanate. This product can be used in non-yellowing systems. In particular, it can be used in combination with hydroxide acrylic resins and saturated polyester in order to create 2K paints and enamels for metal, wood ...view more Polurene M 75 is an aliphatic polyisocyanate. This product can be used in non-yellowing systems. In particular, it can be used in combination with hydroxide acrylic resins and saturated polyester in order to create 2K paints and enamels for metal, wood and plastics. It contains less than .2% HDI isocyanates. view less | |
| BYD7630 | Tianyi Chemical Engineering Material Co., Ltd. | BYD7630, in the form of a white, waterborne anionic emulsion, is a vinyl acetate copolymer that functions as a universal binder for applications such as interior and exterior wall coatings, metal surface coatings, primers, textiles, heat insulation, press...view more BYD7630, in the form of a white, waterborne anionic emulsion, is a vinyl acetate copolymer that functions as a universal binder for applications such as interior and exterior wall coatings, metal surface coatings, primers, textiles, heat insulation, pressure sensitive tape, and more. This product offers strong cohesive strength and high viscosity. Its pH value is 5.0 +/- 1.0. view less | |
| Decotherm™ 260 E | Lawter | Decotherm™ 260 E is a polyester resin dissolved in tripropylene glycol that has the benefit of high pigment wetting, gloss, flow and transfer on high speed presses. It also has good adhesion to metals which is why it is considered ideal for use in metal d...view more Decotherm™ 260 E is a polyester resin dissolved in tripropylene glycol that has the benefit of high pigment wetting, gloss, flow and transfer on high speed presses. It also has good adhesion to metals which is why it is considered ideal for use in metal deco inks. Such inks use the spindle printing or dry offset system of printing on 2-piece cans. view less | |
| Decotherm™ 290 E | Lawter | Decotherm™ 290 E is a structured polyester resin that has low tack and misting properties, shows good transfer on high speed presses and displays adhesion to metals. It is used in metal deco inks using the spindle printing or dry offset method for 2-piece...view more Decotherm™ 290 E is a structured polyester resin that has low tack and misting properties, shows good transfer on high speed presses and displays adhesion to metals. It is used in metal deco inks using the spindle printing or dry offset method for 2-piece cans. It shows good color retention and is also used in white and colored ink applications. view less | |
| SCD 1091 | Etna Tec Limited, LLC | SCD 1091 is an oil-free polyester resin that is designed specifically for excellent adhesion to a variety of metal and plastic substrates. It also offers a hardness/flexibility ratio at low temperature cure cycles while retaining excellent film properties...view more SCD 1091 is an oil-free polyester resin that is designed specifically for excellent adhesion to a variety of metal and plastic substrates. It also offers a hardness/flexibility ratio at low temperature cure cycles while retaining excellent film properties. When modifies with SCD 1040, less than 3.0 pounds/gallon V.O.C. coatings can be formulated with SCD 1091. view less | |
| Ultrafine™ 1W A | Lawter | Ultrafine™ 1W A is a micronized ultrafine polytetrafluoroethylene powder to improve surface properties of coatings and printing inks. It is made for heat resistance, abrasion and lubricity and can be used together with other waxes for more effective performance and cost. Ultrafine™ 1W A is used in heatset and sheet-fed offset inks and in UV, metal...view more Ultrafine™ 1W A is a micronized ultrafine polytetrafluoroethylene powder to improve surface properties of coatings and printing inks. It is made for heat resistance, abrasion and lubricity and can be used together with other waxes for more effective performance and cost. Ultrafine™ 1W A is used in heatset and sheet-fed offset inks and in UV, metal deco and overprint varnishes. view less | |
| 2002A | GIMEL Technical Materials | 2002A is a difunctional special modified urethane acrylate used in UV inkjets, flexo inks, adhesives, nail gels, and high-solid coatings. With excellent toughness and a fast curing response, it provides good adhesion to glass, metal, and plastic with exce...view more 2002A is a difunctional special modified urethane acrylate used in UV inkjets, flexo inks, adhesives, nail gels, and high-solid coatings. With excellent toughness and a fast curing response, it provides good adhesion to glass, metal, and plastic with excellent pigment wetting and high gloss. It is suitable for use in UV inkjet, flexo ink, adhesive, nail gel, and high solid coating. view less | Request Sample |
| Epokukdo YD-017H | Kukdo Chemical Co., Ltd. | Epokukdo YD-017H is an unmodified Bisphenol-A type solid epoxy resin designed for use in high performance one-package baking finishes. Coatings based on the resin produce films with outstanding flexibility and adhesion as well as exceptional resistance to chemicals and solvents. Typical uses for YD -017H are process equipment coating enamels, collapsible tube coatings, can coating, PCM, metal...view more Epokukdo YD-017H is an unmodified Bisphenol-A type solid epoxy resin designed for use in high performance one-package baking finishes. Coatings based on the resin produce films with outstanding flexibility and adhesion as well as exceptional resistance to chemicals and solvents. Typical uses for YD -017H are process equipment coating enamels, collapsible tube coatings, can coating, PCM, metal furniture finishes, and wire enamels. view less | |
| Epokukdo YD-017 | Kukdo Chemical Co., Ltd. | Epokukdo YD-017 is an unmodified Bisphenol-A type solid epoxy resin designed for use in high performance, one-package baking finishes. Coatings based on the resin produce films with outstanding flexibility and adhesion as well as exceptional resistance to chemicals and solvents. Typical uses for YD-017 are process equipment coating enamels, collapsible tube coatings, can coating, metal...view more Epokukdo YD-017 is an unmodified Bisphenol-A type solid epoxy resin designed for use in high performance, one-package baking finishes. Coatings based on the resin produce films with outstanding flexibility and adhesion as well as exceptional resistance to chemicals and solvents. Typical uses for YD-017 are process equipment coating enamels, collapsible tube coatings, can coating, metal furniture finishes, and wire enamels. view less | |
| CHS-Alkyd S 491 W 55 | Spolchemie | CHS-Alkyd S 491 W 55 is a medium oil alkyd resin for solvent borne coatings. This product is made from soybean oil and is provided as a medium viscous 55% solution in white spirit. The oil length for this product is estimated to be 49%. CHS-Alkyd S 491 W 55 is primarily used for manufacture in primer coatings for metal...view more CHS-Alkyd S 491 W 55 is a medium oil alkyd resin for solvent borne coatings. This product is made from soybean oil and is provided as a medium viscous 55% solution in white spirit. The oil length for this product is estimated to be 49%. CHS-Alkyd S 491 W 55 is primarily used for manufacture in primer coatings for metal surfaces. view less | |
| Epokukdo YD-019 | Kukdo Chemical Co., Ltd. | Epokukdo YD-019 is an unmodified Bisphenol-A type solid epoxy resin designed for use in high performance, one-package baking finishes. Coatings based on the resin produce films with outstanding flexibility and adhesion as well as exceptional resistance to chemicals and solvents. Typical uses for YD-019 are process equipment coating enamels, collapsible tube coatings, can coating, PCM, metal...view more Epokukdo YD-019 is an unmodified Bisphenol-A type solid epoxy resin designed for use in high performance, one-package baking finishes. Coatings based on the resin produce films with outstanding flexibility and adhesion as well as exceptional resistance to chemicals and solvents. Typical uses for YD-019 are process equipment coating enamels, collapsible tube coatings, can coating, PCM, metal furniture finishes, and wire enamels. view less | |
| Epokukdo YD-020 | Kukdo Chemical Co., Ltd. | Epokukdo YD-020 is an unmodified Bisphenol-A type solid epoxy resin designed for use in high performance one-package baking finishes. Coatings based on the resin produce films with outstanding flexibility and adhesion as well as exceptional resistance to chemicals and solvents. Typical uses for YD-020 include process equipment coating enamels, collapsible tube coatings, can coating, PCM, metal...view more Epokukdo YD-020 is an unmodified Bisphenol-A type solid epoxy resin designed for use in high performance one-package baking finishes. Coatings based on the resin produce films with outstanding flexibility and adhesion as well as exceptional resistance to chemicals and solvents. Typical uses for YD-020 include process equipment coating enamels, collapsible tube coatings, can coating, PCM, metal furniture finishes, and wire enamels. view less | |
| Epokukdo YD-020L | Kukdo Chemical Co., Ltd. | Epokukdo YD-020L is an unmodified Bisphenol-A type solid epoxy resin designed for use in high performance one-package baking finishes. Coatings based on the resin produce films with outstanding flexibility and adhesion as well as exceptional resistance to chemicals and solvents. Typical uses for YD-020L include process equipment coating enamels, collapsible tube coatings, can coating, PCM, metal...view more Epokukdo YD-020L is an unmodified Bisphenol-A type solid epoxy resin designed for use in high performance one-package baking finishes. Coatings based on the resin produce films with outstanding flexibility and adhesion as well as exceptional resistance to chemicals and solvents. Typical uses for YD-020L include process equipment coating enamels, collapsible tube coatings, can coating, PCM, metal furniture finishes, and wire enamels. view less | |
| Epokukdo YD-019K | Kukdo Chemical Co., Ltd. | Epokukdo YD-019K is an unmodified Bisphenol-A type solid epoxy resin designed for use in high performance one-package baking finishes. Coatings based on the resin produce films with outstanding flexibility and adhesion as well as exceptional resistance to chemicals and solvents. Typical uses for YD-019K include process equipment coating enamels, collapsible tube coatings, can coating, PCM, metal...view more Epokukdo YD-019K is an unmodified Bisphenol-A type solid epoxy resin designed for use in high performance one-package baking finishes. Coatings based on the resin produce films with outstanding flexibility and adhesion as well as exceptional resistance to chemicals and solvents. Typical uses for YD-019K include process equipment coating enamels, collapsible tube coatings, can coating, PCM, metal furniture finishes, and wire enamels. view less | |
| Terlon™ 605 A | Lawter | Terlon™ 605 A is a drying oil alkyd which can carry and print a higher pigment load than conventional alkyds and bodied oils. It has good color retention capabilities making it suitable for use in heat-induced drying applications. Other benefits include the ability to improve tack stability, transfer and adhesion. It is ideally suited for use in coldset, web heatset systems and metal...view more Terlon™ 605 A is a drying oil alkyd which can carry and print a higher pigment load than conventional alkyds and bodied oils. It has good color retention capabilities making it suitable for use in heat-induced drying applications. Other benefits include the ability to improve tack stability, transfer and adhesion. It is ideally suited for use in coldset, web heatset systems and metal decorating inks and varnishes. view less | |
| Terlon™ 603 A | Lawter | Terlon™ 603 A is a drying oil alkyd that possesses good pigment wetting ability, displays good adhesion and transfer and improves tack stability. It has the ability to carry and print higher pigment loads than conventional alkyds and bodied oils. The product has good color retention capabilities, making it ideal for use in heat-induced drying applications. It is suitable for use in coldset, web heatset, metal...view more Terlon™ 603 A is a drying oil alkyd that possesses good pigment wetting ability, displays good adhesion and transfer and improves tack stability. It has the ability to carry and print higher pigment loads than conventional alkyds and bodied oils. The product has good color retention capabilities, making it ideal for use in heat-induced drying applications. It is suitable for use in coldset, web heatset, metal decorating inks and varnishes. view less | |
| Resinate® C2441 Corrosion Control Polyol | Resinate Materials Group, Inc. | Resinate® C2441 is a reactive diluent useful as a performance blend polyol for industrial coatings. It has diol functionality, has very low color, is a flowable liquid at ambient temperature, and when blended with suitable resin systems can provide significant enhancement of several critical properties for metal...view more Resinate® C2441 is a reactive diluent useful as a performance blend polyol for industrial coatings. It has diol functionality, has very low color, is a flowable liquid at ambient temperature, and when blended with suitable resin systems can provide significant enhancement of several critical properties for metal protection. Excellent corrosion protection, good balance of hardness and flexibility, good chemical and stain resistance, very good adhesion. view less | |
| Terlon™ 607 A | Lawter | Terlon™ 607 A is a drying oil alkyd with a soybean base that is able to carry and print a higher pigment load than conventional alkyds and bodied oils. It displays good color retention ability making it ideal for use in heat-induced drying applications. The product is able to facilitate tough, flexible ink films and is suitable for use in coldset systems, in web heatset and varnishes as well as in metal...view more Terlon™ 607 A is a drying oil alkyd with a soybean base that is able to carry and print a higher pigment load than conventional alkyds and bodied oils. It displays good color retention ability making it ideal for use in heat-induced drying applications. The product is able to facilitate tough, flexible ink films and is suitable for use in coldset systems, in web heatset and varnishes as well as in metal decorating inks. view less | |
| CHS-Alkyd Trim 551 W 85 | Spolchemie | CHS-Alkyd Trim 551 W 85 is a medium oiled high solid alkyd resin coating made from tall oil fatty acids and dehydrated castor oil. Oil length is estimated to be 55% but capable of being mixed with long oil alkyds to improve drying and hardness. The primary use for this product is for fast drying protective metal...view more CHS-Alkyd Trim 551 W 85 is a medium oiled high solid alkyd resin coating made from tall oil fatty acids and dehydrated castor oil. Oil length is estimated to be 55% but capable of being mixed with long oil alkyds to improve drying and hardness. The primary use for this product is for fast drying protective metal and wood coatings that have high hardness with hard lacquers, anticorrosive paints and varnishes. view less | |
| Terlon™ 613 A | Lawter | Terlon™ 613 A is a drying oil alkyd with a soybase base and color retention characteristics that make it ideal for use in heat-induced drying applications. The product is able to carry and print a higher pigment load than conventional alkyds and bodied oils. It enhances tough flexibility in ink films, improves adhesion and transfer as well as tack stability. It is suitable for use in web heatset, varnishes, metal...view more Terlon™ 613 A is a drying oil alkyd with a soybase base and color retention characteristics that make it ideal for use in heat-induced drying applications. The product is able to carry and print a higher pigment load than conventional alkyds and bodied oils. It enhances tough flexibility in ink films, improves adhesion and transfer as well as tack stability. It is suitable for use in web heatset, varnishes, metal decorating inks and coldset systems. view less | |
| CHS-Alkyd AL 7310 | Spolchemie | CHS-Alkyd AL 7310 is a long oiled alkyd resin binder for printing inks. This product is made from soybean oil and it has high viscosity and is fully liquid. The oil length for this product is estimated to be around 75%. This product is primarily used for printing inks as a binder for offset, heatset and metal...view more CHS-Alkyd AL 7310 is a long oiled alkyd resin binder for printing inks. This product is made from soybean oil and it has high viscosity and is fully liquid. The oil length for this product is estimated to be around 75%. This product is primarily used for printing inks as a binder for offset, heatset and metal decorating inks. CHS-Alkyd AL 7150 has good color retention, water resistance and pigment wetting. view less | |
| CHS-Alkyd TU 341 X 60 | Spolchemie | CHS-Alkyd TU 341 X 60 is a urethane short oiled alkyd resin binder for solvent borne coatings. This product is made from tall oil fatty acids (TOFA) and dimer fatty acids (DFA) and is provided as a medium viscous 60% solution in xylene. The oil length for this product is estimated to be 34%. CHS-Alkyd TU 341 X 60 is primarily used as a high performance anti-corrosion primer, paints and coatings; that has improved weather resistance on iron and light metal...view more CHS-Alkyd TU 341 X 60 is a urethane short oiled alkyd resin binder for solvent borne coatings. This product is made from tall oil fatty acids (TOFA) and dimer fatty acids (DFA) and is provided as a medium viscous 60% solution in xylene. The oil length for this product is estimated to be 34%. CHS-Alkyd TU 341 X 60 is primarily used as a high performance anti-corrosion primer, paints and coatings; that has improved weather resistance on iron and light metal surfaces. view less | |
| Terlon™ 311 A | Lawter | Terlon™ 311 A is a drying oil alkyd in a linseed base displaying good pigment wetting ability along with hard and fast-drying properties. The product is able to carry and print higher pigment loads than conventional alkyds and bodied oils. Grinding or flushing of the product results in more color strength and cleanliness than conventional wetting systems, while keeping good flow characteristics. It is an ideal pigment binder with an ability to print on most printable surfaces. Such applications include metal...view more Terlon™ 311 A is a drying oil alkyd in a linseed base displaying good pigment wetting ability along with hard and fast-drying properties. The product is able to carry and print higher pigment loads than conventional alkyds and bodied oils. Grinding or flushing of the product results in more color strength and cleanliness than conventional wetting systems, while keeping good flow characteristics. It is an ideal pigment binder with an ability to print on most printable surfaces. Such applications include metal decorating inks, coldset systems, web heatset inks, sheet-fed inks and varnishes. view less | |
| 2112 | GIMEL Technical Materials | 2112 is a twelve-functional urethane acrylate used in plastic coatings and vacuum metallization top coatings. It shows high hardness, good abrasion, and scratch resistance, and excellent compatibility. | Request Sample |
| CHS-Alkyd TRI 841 | Spolchemie | CHS-Alkyd TRI 841 is a long oiled alkyd fast drying binder for low yellowing high solid coatings. This product is made from tall oil fatty acids (TOFA) and dehydrated castor oil (DCO). It is provided as a medium viscous 100% liquid. The oil length for this product is estimated to be around 84%. CHS-Alkyd TRI 841 is primarily for stains, penetrates and topcoats for metal...view more CHS-Alkyd TRI 841 is a long oiled alkyd fast drying binder for low yellowing high solid coatings. This product is made from tall oil fatty acids (TOFA) and dehydrated castor oil (DCO). It is provided as a medium viscous 100% liquid. The oil length for this product is estimated to be around 84%. CHS-Alkyd TRI 841 is primarily for stains, penetrates and topcoats for metal and wood surfaces. It is also used as a binder in printing inks and pigment pastes. This product can be used as a reactive diluent for solvent borne to drop viscosity and VOC levels. view less | |
| VB BRILLIANT | DKSH | VB BRILLIANT is a synthetic barium sulfate characterized by high purity and controlled particle size with an average submicron particle size of approx. 0.2 um. Particle size treatment of VB BRILLIANT allows easy dispersibility in multiple liquid media. VB Brilliant acts as a spacer, provides chemical stability, and increases mechanical and thermal resistance in the automotive top and base coats, metallic effect paints, solder-resistant ink, and semi-transparent resin for wood, plastic, and metal...view more VB BRILLIANT is a synthetic barium sulfate characterized by high purity and controlled particle size with an average submicron particle size of approx. 0.2 um. Particle size treatment of VB BRILLIANT allows easy dispersibility in multiple liquid media. VB Brilliant acts as a spacer, provides chemical stability, and increases mechanical and thermal resistance in the automotive top and base coats, metallic effect paints, solder-resistant ink, and semi-transparent resin for wood, plastic, and metal coating. More generally VB Brilliant can be used such as a spacer and extender of any sub-micron pigment in multiple applications. view less | Request Sample |
| 2115A | GIMEL Technical Materials | 2115A is a fifteen-functional urethane acrylate used in plastic coatings and vacuum metallization top coatings. It shows high hardness, a fast curing response that promotes surface curing, and excellent abrasion and scratch resistance. | Request Sample |
| EXOCOAT™ 151A | Axcentive Sarl | EXOCOAT® 151A by Axcentive is a photocatalytic nano-titanium oxide sol with a strong self-cleaning performance. The photocatalytic effect results in effective radical formation which breaks down organic matter like dirt and soil. Airborne particles like V...view more EXOCOAT® 151A by Axcentive is a photocatalytic nano-titanium oxide sol with a strong self-cleaning performance. The photocatalytic effect results in effective radical formation which breaks down organic matter like dirt and soil. Airborne particles like VOCs, NOx, and biopollution are also eradicated by EXOCOAT® 151A. It can be used as a general air purifier. Though most effective in outdoor light conditions, it is adapted for use under visible light as found in the interior. In all cases, it should be used as a topcoat to ensure its full effect. Glass and walls coated with EXOCOAT® 151A are super hydrophilic enhancing water-sheeting, also called the wash-off effect. It may be used on other flat surfaces such as plastics or coated substrates yet only interior. It dries under room temperature conditions. Spray application is recommended to reach thin monolayers which prove to be more effective. It is listed with EINECS. TSCA, AICS, and CEPA. view less | |
| EXOCOAT™ 151B | Axcentive Sarl | EXOCOAT® 151B by Axcentive is a photocatalytic nano-titanium oxide sol with a strong self-cleaning performance. The photocatalytic effect results in effective radical formation which breaks down organic matter like dirt and soil. Airborne particles like V...view more EXOCOAT® 151B by Axcentive is a photocatalytic nano-titanium oxide sol with a strong self-cleaning performance. The photocatalytic effect results in effective radical formation which breaks down organic matter like dirt and soil. Airborne particles like VOCs, NOx, and biopollution are also eradicated by EXOCOAT® 151B. In all cases, it should be used as a topcoat to ensure its full effect. EXOCOAT® 151B coated walls are super hydrophilic enhancing water-sheeting, also called the wash-off effect. It is targeted for porous substrates like concrete, brickwork, and gypsum. It is not meant for glass substrates. It dries under room temperature conditions. Brush, roller, or Spray application is recommended to reach homogeneous coatings. It is listed with EINECS. TSCA, AICS, and CEPA. view less | |
| Benester 742 | Benasedo | Benester 742 is a slightly branched saturated polyester having a very good adhesion on aluminium and galvanized steel. Good balance between flexibility and surface hardness, colour and exterior resistance. | |
| Yipin® Mica Iron Oxide Red MIOR | Yipin Pigments, Inc. | Yipin® Mica Iron Oxide Red MIOR is a red mica iron oxide pigment in powder form. It has water soluble content of no more than 0.3%, sieve residue of no more than 5.0%, a pH value of 5.5-7.5, and iron oxide content of at least 85%. This product can be used...view more Yipin® Mica Iron Oxide Red MIOR is a red mica iron oxide pigment in powder form. It has water soluble content of no more than 0.3%, sieve residue of no more than 5.0%, a pH value of 5.5-7.5, and iron oxide content of at least 85%. This product can be used in coating applications. view less | |
| Crestakyd® 41-5009 | Scott Bader | Crestakyd® 41-5009 is a styrene modified alkyd used for hammer finishes and quick drying enamels. Also used in the marine industry for quick drying coatings. | |
| EPOCROS™ K-2010E | NIPPON SHOKUBAI CO., LTD. | EPOCROS™ K-2010E is a soft, VOC-free, styrene/acrylic-based oxazoline functionalized reactive copolymer. It acts as an adhesion promoter and a waterborne crosslinking agent. It It offers film properties, low toxicity, fast drying and improved water- & heat resistance. It shows excellent adhesion particularly to polyester such as PET and a controllable appearance by glass transition temperature adjustment. It also offers crosslinking reaction at low temperature (80-120°C) and without any by-product. It exhibits high reactivity with carboxyl groups and performance expression with even small addition. EPOCROS™ K-2010E is used in coatings (metal...view more EPOCROS™ K-2010E is a soft, VOC-free, styrene/acrylic-based oxazoline functionalized reactive copolymer. It acts as an adhesion promoter and a waterborne crosslinking agent. It It offers film properties, low toxicity, fast drying and improved water- & heat resistance. It shows excellent adhesion particularly to polyester such as PET and a controllable appearance by glass transition temperature adjustment. It also offers crosslinking reaction at low temperature (80-120°C) and without any by-product. It exhibits high reactivity with carboxyl groups and performance expression with even small addition. EPOCROS™ K-2010E is used in coatings (metals, films, paper, plastics, leather), primer (film, plastics, building materials, automobiles, PVB inks), paints, inks and pigment printing. view less | Request Sample |
| EPOCROS™ K-2035E | NIPPON SHOKUBAI CO., LTD. | EPOCROS™ K-2035E acts as an adhesion promoter and a waterborne crosslinking agent. It is a hard, VOC-free styrene/acrylic-based oxazoline functionalized reactive copolymer. It provides film properties, low toxicity, fast drying and improved water- & heat resistance. It shows excellent adhesion particularly to polyester such as PET and controllable appearance by glass transition temperature adjustment. It offers crosslinking reaction at low temperature (80-120°C) and without any by-product. It exhibits high reactivity with carboxyl groups and performance expression with even small addition. It has a long pot life for one packaging. EPOCROS™ K-2035E is used in coatings (metal...view more EPOCROS™ K-2035E acts as an adhesion promoter and a waterborne crosslinking agent. It is a hard, VOC-free styrene/acrylic-based oxazoline functionalized reactive copolymer. It provides film properties, low toxicity, fast drying and improved water- & heat resistance. It shows excellent adhesion particularly to polyester such as PET and controllable appearance by glass transition temperature adjustment. It offers crosslinking reaction at low temperature (80-120°C) and without any by-product. It exhibits high reactivity with carboxyl groups and performance expression with even small addition. It has a long pot life for one packaging. EPOCROS™ K-2035E is used in coatings (metals, films, paper, plastics, leather), primer (film, plastics, building materials, automobiles, PVB inks), paints, inks and pigment printing. view less | Request Sample |
| EPOCROS™ K-2020E | NIPPON SHOKUBAI CO., LTD. | EPOCROS™ K-2020E is a VOC-free adhesion promoter and a waterborne crosslinking agent based on styrene/acrylic oxazoline functionalized reactive copolymer. It exhibits high reactivity with carboxyl groups and crosslinking reaction at low temperature (80-120°C) with no by-product. It offers film properties, low toxicity, fast drying along with improved water- and heat resistance. It possesses a controllable appearance by adjusting glass transition temperature. It has a long pot life for one packaging. It shows excellent adhesion particularly to polyester such as PET. Recommended for coatings (metal...view more EPOCROS™ K-2020E is a VOC-free adhesion promoter and a waterborne crosslinking agent based on styrene/acrylic oxazoline functionalized reactive copolymer. It exhibits high reactivity with carboxyl groups and crosslinking reaction at low temperature (80-120°C) with no by-product. It offers film properties, low toxicity, fast drying along with improved water- and heat resistance. It possesses a controllable appearance by adjusting glass transition temperature. It has a long pot life for one packaging. It shows excellent adhesion particularly to polyester such as PET. Recommended for coatings (metals, films, paper, plastics, leather), primer (film, plastics, building materials, automobiles, PVB inks), paints, inks and pigment printing. view less | Request Sample |
| DOWSIL™ 8590 Additive | Dow Performance Silicones | DOWSIL™ 8590 Additive is a self-dispersible, 100 percent active silicone antifoam compound combining good compatibility and good defoaming efficiency, enabling foam control at low temperature in waterborne coatings and inks systems without impacting surfa...view more DOWSIL™ 8590 Additive is a self-dispersible, 100 percent active silicone antifoam compound combining good compatibility and good defoaming efficiency, enabling foam control at low temperature in waterborne coatings and inks systems without impacting surface gloss. DOWSIL™ 8590 Additive can be used as sole defoamer for both grind and let down stages. Usage level can be 50 to 70 percent less than conventional defoamers for comparable or better performance. view less | |
| SHIKOH™ UV-7610B | Nippon Gohsei | SHIKOH™ UV-7610B is a hard-type, UV-curable urethane acrylate oligomer resin featuring a high molecular weight. This product is well suited for use in hard coatings for plastics, electronics, optical discs, and woodworking applications, as well as masking...view more SHIKOH™ UV-7610B is a hard-type, UV-curable urethane acrylate oligomer resin featuring a high molecular weight. This product is well suited for use in hard coatings for plastics, electronics, optical discs, and woodworking applications, as well as masking tapes and adhesive films and labels. view less | |
| 2052 | GIMEL Technical Materials | 2052 is a difunctional aliphatic urethane acrylate used in vacuum metallization primers, plastic finishing coatings, and adhesives. It shows good adhesion to metallization and excellent toughness. | Request Sample |
| 2010H | GIMEL Technical Materials | 2010H is a ten-functional aliphatic urethane acrylate used in plastic coatings, vacuum metallization coatings, and varnishes. It is a fast curing, high toughness, and hardness product with excellent abrasion and scratch resistance. Applications include pl...view more 2010H is a ten-functional aliphatic urethane acrylate used in plastic coatings, vacuum metallization coatings, and varnishes. It is a fast curing, high toughness, and hardness product with excellent abrasion and scratch resistance. Applications include plastic coating, vacuum metallization coating, and varnish. view less | Request Sample |
| 613 | GIMEL Technical Materials | 613 is a special modified polyester acrylate used in lithographic inks, DVD adhesives, and vacuum metalization primers. | Request Sample |
| 2062W | GIMEL Technical Materials | 2062W is a difunctional waterborne aliphatic urethane acrylate used in waterborne coatings. It shows excellent toughness and good adhesion to metallization with no yellowing. | Request Sample |
| Lucidene 202 | Hydrite Chemical Co. | Lucidene 202 is a water-based styrene/acrylic copolymer designed for use with metallic pigments. This product is well suited for use in water-based inks and coatings. | |
| 713 | GIMEL Technical Materials | 713 is a difunctional amine-modified epoxy acrylate used in inks, wood coatings, and vacuum metallization coatings.It has a fast curing response, good adhesion, and excellent flexibility. | Request Sample |
| 700 | GIMEL Technical Materials | 700 is a difunctional standard bisphenol A epoxy acrylate used in inks, wood coatings, printing varnishes, adhesives, and vacuum metallization primers. It has a fast curing response and good abrasion resistance. | Request Sample |
| 6483 | GIMEL Technical Materials | 6483 is a tetrafunctional modified polyester acrylate used in vacuum metallization primers, wood coating primers, and paper varnishes. It has a fast curing response with boiling water resistance and good flexibility. | Request Sample |
| 6103 | GIMEL Technical Materials | 6103 is a modified polyester acrylate used in vacuum metallization base coatings, varnishes, and wood coatings. It has excellent pigment wetting, good leveling, and high gloss with good film builds and flexibility. | Request Sample |
| 7183 | GIMEL Technical Materials | 7183 is a modified diacrylate ester of bisphenol A epoxy oligomer used in vacuum metallization base coatings, wood coatings, and paper varnishes. It shows a good flexibility, fast curing response, and a boiling water resistance. | Request Sample |
| 6582 | GIMEL Technical Materials | 6582 is a tetrafunctional polyester acrylate used in vacuum metallization primers, wood coatings, paper varnishes, and inks. It has a fast curing response with excellent adhesion, good flexibility and leveling, and a boiling water resistance. | Request Sample |
| 2523A | GIMEL Technical Materials | 2523A is a trifunctional aliphatic urethane acrylate used in nail gels, vacuum metallization primers, adhesives, and plastic coatings. It has a yellowing resistance, excellent abrasion resistance and toughness, and good heat and solvent resistance. | Request Sample |
| 2523L | GIMEL Technical Materials | 2523L is a trifunctional aliphatic urethane acrylate used in optical fiber coatings, vacuum metallization primers, finishing coatings, and 3D printings. It shows good toughness, excellent abrasion resistance, and good heat and solvent resistance. | Request Sample |
| 708B | GIMEL Technical Materials | 708B is a difunctional modified epoxy acrylate used in vacuum metallization coatings, plastic coatings, inks, and paper varnishes.It has good solvent resistance and excellent flexibility and reactivity. It shows good adhesion to a general plastic substrat...view more 708B is a difunctional modified epoxy acrylate used in vacuum metallization coatings, plastic coatings, inks, and paper varnishes.It has good solvent resistance and excellent flexibility and reactivity. It shows good adhesion to a general plastic substrate and a high gloss view less | Request Sample |
| 708 | GIMEL Technical Materials | 708 is a difunctional modified epoxy acrylate used in vacuum metallization coatings, plastic coatings, inks, and paper varnishes. It has good solvent resistance and excellent flexibility and reactivity. It shows good adhesion to general plastic substrate ...view more 708 is a difunctional modified epoxy acrylate used in vacuum metallization coatings, plastic coatings, inks, and paper varnishes. It has good solvent resistance and excellent flexibility and reactivity. It shows good adhesion to general plastic substrate and a high gloss. view less | Request Sample |
| 7182 | GIMEL Technical Materials | 7182 is a modified diacrylate ester of bisphenol A epoxy oligomer used in lithographic inks, DVD adhesives, and vacuum metallization primers. It has good pigment-wetting with improved ink transfer-ability and dry roll resistance, good flexibility and bend...view more 7182 is a modified diacrylate ester of bisphenol A epoxy oligomer used in lithographic inks, DVD adhesives, and vacuum metallization primers. It has good pigment-wetting with improved ink transfer-ability and dry roll resistance, good flexibility and bending resistance, and a fast curing response. view less | Request Sample |
| Novares® CA 80 Liquid | Rain Carbon Germany GmbH | Novares® CA 80 is a Indene-Cumarone resin(SP 80 °C) containing phenolic OH groups.It is ideal to use in anticorrosive and marine paints based on epoxy and polyurethane to increase hydophobicity and chemical resistance. Additionaly it works as adhesion promotor on metal...view more Novares® CA 80 is a Indene-Cumarone resin(SP 80 °C) containing phenolic OH groups.It is ideal to use in anticorrosive and marine paints based on epoxy and polyurethane to increase hydophobicity and chemical resistance. Additionaly it works as adhesion promotor on metals. Detailed information is available upon request. view less | |
| Novares® CA 100 | Rain Carbon Germany GmbH | Novares® CA 100 is a Indene-Cumarone resin(SP 100 °C) containing phenolic OH groups.It is ideal to use in anticorrosive and marine paints based on epoxy and polyurethane to increase hydophobicity and chemical resistance. Additionaly it works as adhesion promotor on metal...view more Novares® CA 100 is a Indene-Cumarone resin(SP 100 °C) containing phenolic OH groups.It is ideal to use in anticorrosive and marine paints based on epoxy and polyurethane to increase hydophobicity and chemical resistance. Additionaly it works as adhesion promotor on metals. Detailed information is available upon request. view less | |
| Novares® CA 80 Solid | Rain Carbon Germany GmbH | Novares® CA 80 is a Indene-Cumarone resin(SP 80 °C) containing phenolic OH groups.It is ideal to use in anticorrosive and marine paints based on epoxy and polyurethane to increase hydophobicity and chemical resistance. Additionaly it works as adhesion promotor on metal...view more Novares® CA 80 is a Indene-Cumarone resin(SP 80 °C) containing phenolic OH groups.It is ideal to use in anticorrosive and marine paints based on epoxy and polyurethane to increase hydophobicity and chemical resistance. Additionaly it works as adhesion promotor on metals. Detailed information is available upon request. view less | |
| Idroben 207 | Benasedo | Idroben 207 is an antiyellowing and very fast drying film forming binder with good characteristics of flexibility, adhesion and hardness. It is suggested to formulate non-yellowing topcoats,clear or pigmented, for wood, metals and plastics. Idroben 207 ca...view more Idroben 207 is an antiyellowing and very fast drying film forming binder with good characteristics of flexibility, adhesion and hardness. It is suggested to formulate non-yellowing topcoats,clear or pigmented, for wood, metals and plastics. Idroben 207 can be used in baking enamels, alone or crosslinked with amino- resins achieving good antiyellowing properties matched with noticeable chemical resistance properties. view less | |
| OEM Topcoat with Metallic Flake Pigments (Formulation #SPF_CTG_033_2203) | Arkema Rheology & Specialty Additives | This OEM topcoat formulation features Coadis™ 790. |
