| KRATON® D1191 ES Polymer | Kraton Polymers International Ltd. | KRATON® D1191 ES Polymer is a clear, radial block copolymer based on styrene and butadiene with bound styrene of 33.5% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide...view more KRATON® D1191 ES Polymer is a clear, radial block copolymer based on styrene and butadiene with bound styrene of 33.5% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1191 ES Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, sealants, and coatings. view less | |
| KRATON® D1101 ES Polymer | Kraton Polymers International Ltd. | KRATON® D1101 ES Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide r...view more KRATON® D1101 ES Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1101 ES Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, road and pipe coating, adhesives, and sealants. view less | |
| KRATON® D1101 ESM Polymer | Kraton Polymers International Ltd. | KRATON® D1101 ESM Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as powder dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of...view more KRATON® D1101 ESM Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as powder dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1101 ESM Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, road and pipe coating, adhesives, and sealants. view less | |
| KRATON® D1152 ES Polymer | Kraton Polymers International Ltd. | KRATON® D1152 ES Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 29.5% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide...view more KRATON® D1152 ES Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 29.5% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1152 ES Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. view less | |
| KRATON® D1153 ES Polymer | Kraton Polymers International Ltd. | KRATON® D1153 ES Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 29.5% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide...view more KRATON® D1153 ES Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 29.5% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1153 ES Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. view less | |
| KRATON® D1155 ES Polymer | Univar Solutions | KRATON® D1155 ES Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 40% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide r...view more KRATON® D1155 ES Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 40% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1155 ES Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. view less | Request Sample |
| KRATON® D1155 ES Polymer | Kraton Polymers International Ltd. | KRATON® D1155 ES Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 40% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide r...view more KRATON® D1155 ES Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 40% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1155 ES Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. view less | |
| KRATON® D1157 ES Polymer | Univar Solutions | KRATON® D1157 ES Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 29.5% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide...view more KRATON® D1157 ES Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 29.5% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1157 ES Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. view less | Request Sample |
| KRATON® D1157 ES Polymer | Kraton Polymers International Ltd. | KRATON® D1157 ES Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 29.5% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide...view more KRATON® D1157 ES Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 29.5% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1157 ES Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. view less | |
| KRATON® D1184 ES Polymer | Kraton Polymers International Ltd. | KRATON® D1184 ES Polymer is a clear, branched block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide...view more KRATON® D1184 ES Polymer is a clear, branched block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1184 ES Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, road and pipe coatings, and sealants. view less | |
| KRATON® D1184 ESM Polymer | Kraton Polymers International Ltd. | KRATON® D1184 ESM Polymer is a clear, branched block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as powder dusted with amorphous silica. This product is versatile with a combination of high strength, wide range ...view more KRATON® D1184 ESM Polymer is a clear, branched block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as powder dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1184 ESM Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, road and pipe coatings, and sealants. view less | |
| KRATON® D1186 AS Polymer | Kraton Polymers International Ltd. | KRATON® D1186 AS Polymer is a clear, branched block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide...view more KRATON® D1186 AS Polymer is a clear, branched block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1186 AS Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, road and pipe coatings, and sealants. view less | |
| KRATON® D1186 ASM Polymer | Kraton Polymers International Ltd. | KRATON® D1186 ASM Polymer is a clear, branched block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as powder dusted with amorphous silica. This product is versatile with a combination of high strength, wide range ...view more KRATON® D1186 ASM Polymer is a clear, branched block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as powder dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1186 ASM Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, road and pipe coatings, and sealants. view less | |
| KRATON® D1186 ES Polymer | Kraton Polymers International Ltd. | KRATON® D1186 ES Polymer is a clear, branched block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide...view more KRATON® D1186 ES Polymer is a clear, branched block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1186 ES Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. view less | |
| KRATON® D1192 ES Polymer | Kraton Polymers International Ltd. | KRATON® D1192 ES Polymer is a clear linear block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide ra...view more KRATON® D1192 ES Polymer is a clear linear block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1192 ES Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. view less | |
| KRATON® D4153 ES Polymer | Kraton Polymers International Ltd. | KRATON® D4153 ES Polymer is an oil-extended linear block copolymer based on styrene and butadiene with bound styrene in the neat polymer of 35% mass. It is supplied as porous pellets dusted with an amorphous silica. This product is versatile with a combin...view more KRATON® D4153 ES Polymer is an oil-extended linear block copolymer based on styrene and butadiene with bound styrene in the neat polymer of 35% mass. It is supplied as porous pellets dusted with an amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D4153 ES Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. view less | |
| KRATON® D4153 ESM Polymer | Kraton Polymers International Ltd. | KRATON® D4153 ESM Polymer is an oil-extended linear block copolymer based on styrene and butadiene with bound styrene in the neat polymer of 35% mass. It is supplied as powder dusted with an amorphous silica. This product is versatile with a combination o...view more KRATON® D4153 ESM Polymer is an oil-extended linear block copolymer based on styrene and butadiene with bound styrene in the neat polymer of 35% mass. It is supplied as powder dusted with an amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D4153 ESM Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. view less | |
| Moonshine® Colour Travel Violet-Blue-Green Ultra Sparkle (GFE-VBGUS) | Glassflake Ltd | Moonshine® Colour Travel Violet-Blue-Green Ultra Sparkle (GFE-VBGUS) are thin borosilicate glass flakes with an average thickness of 1.2 microns. They are coated with layers of high refractive index metal oxides and silica, resulting in unique pigments th...view more Moonshine® Colour Travel Violet-Blue-Green Ultra Sparkle (GFE-VBGUS) are thin borosilicate glass flakes with an average thickness of 1.2 microns. They are coated with layers of high refractive index metal oxides and silica, resulting in unique pigments that display strong color flop effects combined with high transparency and extraordinary gloss. They allow for the creation of unique designs and styles, even at low loadings. The Effect series may be used in both cosmetic and industrial applications. view less | |
| Moonshine® Colour Travel Blue-Green-Gold Ultra Sparkle (GFE-BGGUS) | Glassflake Ltd | Moonshine® Colour Travel Blue-Green-Gold Ultra Sparkle (GFE-BGGUS) are thin borosilicate glass flakes with an average thickness of 1.2 microns. They are coated with layers of high refractive index metal oxides and silica, resulting in unique pigments that...view more Moonshine® Colour Travel Blue-Green-Gold Ultra Sparkle (GFE-BGGUS) are thin borosilicate glass flakes with an average thickness of 1.2 microns. They are coated with layers of high refractive index metal oxides and silica, resulting in unique pigments that display strong color flop effects combined with high transparency and extraordinary gloss. They allow for the creation of unique designs and styles, even at low loadings. The Effect series may be used in both cosmetic and industrial applications. view less | |
| Moonshine® Colour Travel Gold-Red-Violet Ultra Sparkle (GFE-GRVUS) | Glassflake Ltd | Moonshine® Colour Travel Gold-Red-Violet Ultra Sparkle (GFE-GRVUS) are thin borosilicate glass flakes with an average thickness of 1.2 microns. They are coated with layers of high refractive index metal oxides and silica, resulting in unique pigments that...view more Moonshine® Colour Travel Gold-Red-Violet Ultra Sparkle (GFE-GRVUS) are thin borosilicate glass flakes with an average thickness of 1.2 microns. They are coated with layers of high refractive index metal oxides and silica, resulting in unique pigments that display strong color flop effects combined with high transparency and extraordinary gloss. They allow for the creation of unique designs and styles, even at low loadings. The Effect series may be used in both cosmetic and industrial applications. view less | |
| Moonshine® Colour Travel Red-Violet-Blue Ultra Sparkle (GFE-RVBUS) | Glassflake Ltd | Moonshine® Colour Travel Red-Violet-Blue Ultra Sparkle (GFE-RVBUS) are thin borosilicate glass flakes with an average thickness of 1.2 microns. They are coated with layers of high refractive index metal oxides and silica, resulting in unique pigments that...view more Moonshine® Colour Travel Red-Violet-Blue Ultra Sparkle (GFE-RVBUS) are thin borosilicate glass flakes with an average thickness of 1.2 microns. They are coated with layers of high refractive index metal oxides and silica, resulting in unique pigments that display strong color flop effects combined with high transparency and extraordinary gloss. They allow for the creation of unique designs and styles, even at low loadings. The Effect series may be used in both cosmetic and industrial applications. view less | |
| Resiflow® P-66F | Estron Chemical, Inc. | Resiflow® P-66F is a specialty flow control agent designed for powder coating systems. It is based on the carboxyl functional acrylic polymer product Resiflow® L-66F which has been converted into free-flowing powder by adsorption onto silica-type carrier....view more Resiflow® P-66F is a specialty flow control agent designed for powder coating systems. It is based on the carboxyl functional acrylic polymer product Resiflow® L-66F which has been converted into free-flowing powder by adsorption onto silica-type carrier. In addition to good flow and leveling, Resiflow® P-66F shows a marked improvement in clarity in non-pigmented polyester-TGIC systems compared to classical flow control agents. view less | |
| Crystal™ EX | PQ Corporation | Crystal™ EX is a water based silicic acid formulated with inorganic sodium compounds designed to maximize the polymerization performance, primarily when used as a co-binder, partially replacing latex emulsions, such as vinyl acrylic and styrene acrylic. | |
| MODAFLOW® NSR 100 | Allnex | MODAFLOW® NSR 100 is a solvent based dispersion of modified nanosilica for improving scratch resistance. | Request Sample |
| TEGO® Foamex 822 | Evonik Operations GmbH, BL Coating Additives | TEGO® Foamex 822 is a defoamer emulsion with a broad application range, easy incorporation, and good long-term effectiveness. It is a white, thixotropic liquid emulsion of a polyether siloxane copolymer which contains fumed silica. TEGO® Foamex 822 has st...view more TEGO® Foamex 822 is a defoamer emulsion with a broad application range, easy incorporation, and good long-term effectiveness. It is a white, thixotropic liquid emulsion of a polyether siloxane copolymer which contains fumed silica. TEGO® Foamex 822 has strong long-term defoaming. It is well suited for clearcoats, waterborne, and sensitive systems. It is highly suitable for brush/roller applications, compressed air spraying, and dip, flow, and curtain coating. It is also suitable for airless spraying and flexo/gravure printing. view less | Request Sample |
| TEGO® Foamex 842 | Evonik Operations GmbH, BL Coating Additives | TEGO® Foamex 842 is a highly effective defoamer solution with good long-term effectiveness and very strong defoaming for use in millbase. It is a silica-free clear liquid solution of a polyether siloxane copolymer. Addition of this product may be either i...view more TEGO® Foamex 842 is a highly effective defoamer solution with good long-term effectiveness and very strong defoaming for use in millbase. It is a silica-free clear liquid solution of a polyether siloxane copolymer. Addition of this product may be either in the grind or during the let-down procedure. The long-term effectiveness of the defoamer is dependent on the formulation and should be tested in the individual formulation. TEGO® Foamex 842 is highly suitable for flexo/gravure printing. It is also suitable for both airless and compressed air spraying. view less | Request Sample |
| NANOCRYL® C 130 | Evonik Operations GmbH, BL Coating Additives | NANOCRYL® C 130 is a clear to slightly yellow liquid, 50 wt.-% silica nanoparticles in cyclic trimethylolpropane formal acrylate. It is used for solventborne and solvent-free radiation-curing formulations. It has good flexibility and is applied in overpri...view more NANOCRYL® C 130 is a clear to slightly yellow liquid, 50 wt.-% silica nanoparticles in cyclic trimethylolpropane formal acrylate. It is used for solventborne and solvent-free radiation-curing formulations. It has good flexibility and is applied in overprint varnishes and plastic top coats. This product has an enhanced scratch and abrasion resistance with no decrease of transparency. It has great adhesion on aluminum/glass, reduced cure shrinkage, and barrier effect. It also has adhesion on plastic, an anti-settling effect of filled formulations, and improved dirt shedding. view less | Request Sample |
| Rhenogran® Resorcin-80 | Rhein Chemie Rheinau GmbH | Rhenogran® Resorcin-80 is 80% resorcinol and 20% EPDM/EVA binder and dispersing agents appearing as off-white to brown granules. This direct bonding compound is used for the bonding system resorcinol formaldehyde silica and is suitable for bonding rubber ...view more Rhenogran® Resorcin-80 is 80% resorcinol and 20% EPDM/EVA binder and dispersing agents appearing as off-white to brown granules. This direct bonding compound is used for the bonding system resorcinol formaldehyde silica and is suitable for bonding rubber to reinforcing materials such as fabrics, glass fibres, and steel cord. Rhenogran® Resorcin-80 finds application in tires and technical rubber goods such as conveyor belts, raw-edge V-belts, round belts, fire hose, other reinforced hoses, flexible containers, and fabric proofings. view less | |
| Resiflow® P-65F | Estron Chemical, Inc. | Resiflow® P-65F is a specialty flow control agent designed for powder coating systems. It is based on the carboxyl functional acrylic polymer product Resiflow® L-65F, which has been converted into free-flowing powder by adsorption onto silica-type carrier...view more Resiflow® P-65F is a specialty flow control agent designed for powder coating systems. It is based on the carboxyl functional acrylic polymer product Resiflow® L-65F, which has been converted into free-flowing powder by adsorption onto silica-type carrier. In addition to good flow and leveling, Resiflow® P-65F shows a marked improvement in clarity in non-pigmented hybrid and epoxy systems compared to a classical flow control agent, such as Resiflow® P-67. view less | |
| XOANONS® WE-D982V | Anhui Xoanons Chemical Co., Ltd. | XOANONS® WE-D982V is a defoamer concentrate. It is composed of dimethyl polysiloxane, and contains fumed silica. It provides foam inhibition and micro-bubble elimination in UV, and is solventborne. It can be used in high solid content, solvent free epoxy ...view more XOANONS® WE-D982V is a defoamer concentrate. It is composed of dimethyl polysiloxane, and contains fumed silica. It provides foam inhibition and micro-bubble elimination in UV, and is solventborne. It can be used in high solid content, solvent free epoxy and screen ink paint. For the existence of hydrophobic particles, precipitation may occur after long periods of storage. It does not affect the quality of products after stirring before use (except varnish). XOANONS®WE-D982V can meet VOC content requirements of VOC content for tobacco. view less | |
| EFKA® RM 1506 | BASF Formulation Additives | EFKA® RM 1506 is a hard paste-type polyolefin wax thickener which is designed to provide anti-settling and anti-hard caking performance with improved stabilization of pigment dispersion in solvent-based coatings. It is suitable for all types of enamels, i...view more EFKA® RM 1506 is a hard paste-type polyolefin wax thickener which is designed to provide anti-settling and anti-hard caking performance with improved stabilization of pigment dispersion in solvent-based coatings. It is suitable for all types of enamels, including heavy duty coatings. EFKA® RM 1506 has a bubble structure which gives lower viscosity and enhances scratch resistance. It is superior to clay and silica additives for preventing pigment settling and hard caking without affecting viscosity. view less | |
| TEGO® Dispers 740 W | Evonik Operations GmbH, BL Coating Additives | TEGO® Dispers 740 W is a pigment-wetting and dispersing additive. It is a non-ionic, modified fatty acid derivative; aromatic-, amine- and alkylphenolethoxylate-free, yellowish, clear to slightly hazy liquid. Based on sustainable raw materials, TEGO® Disp...view more TEGO® Dispers 740 W is a pigment-wetting and dispersing additive. It is a non-ionic, modified fatty acid derivative; aromatic-, amine- and alkylphenolethoxylate-free, yellowish, clear to slightly hazy liquid. Based on sustainable raw materials, TEGO® Dispers 740 W wets and stabilizes organic and carbon black pigments in pigment concentrates. It also improves colorant acceptance when used in the millbase of emulsion paints. For inorganic pigment concentrates, the addition of rheology modifiers such as fumed silica has proven to be beneficial when formulating this product. view less | Request Sample |
| CYREZ® CRA 200-300 Product Family (72% HMMM) | Allnex | CYREZ® 200-300 resins are a portfolio of HMMM-based resins using precipitated silica as a carrier. These resins are 72% active ingredient HMMM and function as adhesion promoter or crosslinker in the "HRH" dry rubber adhesion systems for bonding rubber to ...view more CYREZ® 200-300 resins are a portfolio of HMMM-based resins using precipitated silica as a carrier. These resins are 72% active ingredient HMMM and function as adhesion promoter or crosslinker in the "HRH" dry rubber adhesion systems for bonding rubber to organic cord and wire reinforcement materials. This product offers several advantages over the older hexa methylene tetramine (HEXA or HMT) system. These products are available globally and producted in multiple manufacturing locations. Please contact your allnex representative regarding product availability in specific countries and regions. view less | Request Sample |
| Rhenogran® Resorcin-80 SBR | Rhein Chemie Rheinau GmbH | Rhenogran® Resorcin-80 SBR is 80% resorcinol and 20% SBR binder and dispersing agents appearing as off-white to brown granules. This direct bonding compound is used for the bonding system resorcinol formaldehyde silica and is suitable for bonding rubber t...view more Rhenogran® Resorcin-80 SBR is 80% resorcinol and 20% SBR binder and dispersing agents appearing as off-white to brown granules. This direct bonding compound is used for the bonding system resorcinol formaldehyde silica and is suitable for bonding rubber to reinforcing materials such as fabrics, glass fibres, and steel cord. Rhenogran® Resorcin-80 SBR finds application in tires and technical rubber goods such as conveyor belts, raw-edge V-belts, round belts, fire hose, other reinforced hoses, flexible containers, and fabric proofings. view less | |
| Escat™ 60 | Estron Chemical, Inc. | Escat™ 60 is a purified imidazole catalyst absorbed onto a silica carrier. The product is used to accelerate the cure of powder coatings that are responsive to imidazole catalysis. Some example powder coating chemistries that can be catalyzed with ESCAT 6...view more Escat™ 60 is a purified imidazole catalyst absorbed onto a silica carrier. The product is used to accelerate the cure of powder coatings that are responsive to imidazole catalysis. Some example powder coating chemistries that can be catalyzed with ESCAT 60 include hybrids such as polyester-epoxy, carboxyl acrylic-epoxy, polyesters cured by GMA-functional acrylics, polyester-TGIC and polyester-PT-910. Escat™ 60 reduces the cure temperature of a particular system and shortens the required bake time at a given cure temperature when compared to non-catalyzed systems. view less | |
| Borchi® Coll 10 | Borchers, A Company of OMG | Borchi® Coll 10 is an anti-blocking additive for all waterborne paints and coatings. It has a slightly turbid appearance. This product is a colloid dispersion of silica particles of variable particle size according to type. With its reactive groups, it af...view more Borchi® Coll 10 is an anti-blocking additive for all waterborne paints and coatings. It has a slightly turbid appearance. This product is a colloid dispersion of silica particles of variable particle size according to type. With its reactive groups, it affects initial and through drying of synthetic resin dispersions, silicate paints and waterborne alkyd resin systems which dry by oxidation. Borchi® Coll also improves adhesion to wood, plastic and metal surfaces. It reduces the tendency towards under-rusting as a result of improved film quality and more uniform distribution of barrier properties on the substrate. view less | |
| Borchi® Coll 20 M | Borchers, A Company of OMG | Borchi® Coll 20 M is a colloid dispersion of silica nanosized particles which acts as an anti-blocking additive for all waterborne paints and coatings. With its reactive groups, it affects initial and through drying of synthetic resin dispersions, silicat...view more Borchi® Coll 20 M is a colloid dispersion of silica nanosized particles which acts as an anti-blocking additive for all waterborne paints and coatings. With its reactive groups, it affects initial and through drying of synthetic resin dispersions, silicate paints and waterborne alkyd resin systems which dry by oxidation. It also improves adhesion to wood, plastic and metal surfaces. This product is particularly suitable for use in waterborne isocyanate-modified alkyd resins and accelerates drying of the films. It also improves film strength and final film hardness. This product appears an opalescent turbid liquid view less | |
| Surfynol® MD 20 | Evonik Operations GmbH, BL Coating Additives | Surfynol® MD 20 is a multifunctional defoamer it provides a combination of foam control and dynamic wetting, with the potential to reduce overall additive levels, while minimizing surface defects. Surfynol® MD 20 is exceptionally effective at eliminating ...view more Surfynol® MD 20 is a multifunctional defoamer it provides a combination of foam control and dynamic wetting, with the potential to reduce overall additive levels, while minimizing surface defects. Surfynol® MD 20 is exceptionally effective at eliminating microfoam and other foam related defects in waterborne systems when used as a foam control agent. It is 100% active, solvent-free, clear liquid. It is free of silicone and hydrophobic silica. It is temperature and pH stable (pH 1-13). Applications include, coatings, graphic arts, adhesives, dye and pigment synthesis, pigment grinding, oil and gas processing, cleaning products, metalworking fluids, cements, mortars and grouts and personal care. view less | Request Sample |
| Durham Cobalt 254 | Huntsman Pigments & Additives | Durham Cobalt 254 compounds are smooth uniform cobalt-based pastes for the prevention of loss of dry in paint systems and reduction in gel time drift in unsaturated polyester resins. Durham Cobalt 254 is used as a “feeder drier” for systems that exhibit l...view more Durham Cobalt 254 compounds are smooth uniform cobalt-based pastes for the prevention of loss of dry in paint systems and reduction in gel time drift in unsaturated polyester resins. Durham Cobalt 254 is used as a “feeder drier” for systems that exhibit loss of dry on storage. The high percentage of cobalt contained in Cobalt 254 acts as a sacrificial additive and allows the standard driers to perform their functions without being affected by additional additives that may be present in the system. The main cause of loss of dry occurs in high filled systems containing silica matting agents and in dark colour systems containing colorants such as carbon black and iron oxide pigments. view less | |
| TROYKYD® D726 | Arxada – Troy Corporation | Troykyd® D726 is used in the manufacture of latex flat and semi-gloss coatings. It reduces the amount of foam produced during the let-down and tinting steps, and provides smooth films upon roll-out or brushing. It is effective at low concentrations and th...view more Troykyd® D726 is used in the manufacture of latex flat and semi-gloss coatings. It reduces the amount of foam produced during the let-down and tinting steps, and provides smooth films upon roll-out or brushing. It is effective at low concentrations and the benefits of use are economy of use, persistent good shelf-life in the coating, and good phase stability in its drum. view less | Request Sample |
| Bubreak® 4419 | Buckman Laboratories, Inc. | Bubreak® 4419 is an antifoam/defoamer concentrate for use in water-based coatings, adhesives, and similar emulsion-based systems. The product contains no silicone or silica and is effective over a wide pH range. Bubreak® 4419 is composed of substances app...view more Bubreak® 4419 is an antifoam/defoamer concentrate for use in water-based coatings, adhesives, and similar emulsion-based systems. The product contains no silicone or silica and is effective over a wide pH range. Bubreak® 4419 is composed of substances approved for use under 21 CFR § 176.200 and 21 CFR § 176.210 of the U.S. Food and Drug Administration regulations. Most water- and emulsion-based products generate foam during production, shipping, or application. Bubreak® 4419 has been designed to perform as both an antifoam, fighting foam formation, and as a defoamer, breaking down existing foam. The product has proven effective in a wide range of resins, including acrylics, vinyl acrylics, polyvinyl acetates, and water-reducible alkyds. view less | |
| KBM-303 | Shin-Etsu Silicones of America | KBM-303 is an epoxy functional methoxysilane that is used in many different types of applications including primers, adhesion promoters, scratch resistant coatings, encapsulants, and gaskets. This coupling agent improves the mechanical strength, water res...view more KBM-303 is an epoxy functional methoxysilane that is used in many different types of applications including primers, adhesion promoters, scratch resistant coatings, encapsulants, and gaskets. This coupling agent improves the mechanical strength, water resistance, and heat resistance of complex materials containing inorganic fillers and organic polymers. It is suitable for a wide variety of heat curable systems like epoxies, phenolics, melamines, and urethanes, as well as thermoplastic elastomers like polycarbonate, nylon, polystyrene, PET, PBT, and ABS. Epoxysilanes have replaced aminosilanes in several applications, resulting in significantly improved performance. KBM-303 works well with most of the common inorganic substrates such as glass, silica, mica, alumina, clay, and talc, as well as most metals, such as iron and copper. view less | |
| KBM-403 | Shin-Etsu Silicones of America | KBM-403 is an epoxy functional methoxysilane that is used in many different types of applications including primers, adhesion promoters, scratch resistant coatings, encapsulants, and gaskets. This coupling agent improves the mechanical strength, water res...view more KBM-403 is an epoxy functional methoxysilane that is used in many different types of applications including primers, adhesion promoters, scratch resistant coatings, encapsulants, and gaskets. This coupling agent improves the mechanical strength, water resistance, and heat resistance of complex materials containing inorganic fillers and organic polymers. It is suitable for a wide variety of heat curable systems like epoxies, phenolics, melamines, and urethanes, as well as thermoplastic elastomers like polycarbonate, nylon, polystyrene, PET, PBT, and ABS. Epoxysilanes have replaced aminosilanes in several applications, resulting in significantly improved performance. KBM-403 works well with most of the common inorganic substrates such as glass, silica, mica, alumina, clay, and talc, as well as most metals, such as iron and copper. view less | |
| CS-200 | Glassfillers.com (A unit of Vitrominerals Inc.) | CS-200, glass powder, is a well-designed extender and glass filler made from 100% recycled glass. It is a white to off-white colored powder with an even particle size distribution. Scanning electron microscopy and X-ray diffraction endorse that the CS Gla...view more CS-200, glass powder, is a well-designed extender and glass filler made from 100% recycled glass. It is a white to off-white colored powder with an even particle size distribution. Scanning electron microscopy and X-ray diffraction endorse that the CS Glass powder contains no crystalline silica and is fully amorphous. CS-200 deals clean post-consumer filler for polymer-based systems where the uppermost brightness is not essential. The filler imparts chemical stability and admirable abrasion resistance to coatings and other polymer systems. CS-200 has a specific gravity of 2.5, a bulk density of 63 lb/ft3, a hegman value of 2, a pH of 10 to 11, a refractive index of 1.56, and a brightness of 78 to 83. view less | |
| CS-325 | Glassfillers.com (A unit of Vitrominerals Inc.) | CS-325, glass powder, is a well-designed extender and glass filler made from 100% recycled glass. It is a white to off-white colored powder with an even particle size distribution. Scanning electron microscopy and X-ray diffraction endorse that the CS Gla...view more CS-325, glass powder, is a well-designed extender and glass filler made from 100% recycled glass. It is a white to off-white colored powder with an even particle size distribution. Scanning electron microscopy and X-ray diffraction endorse that the CS Glass powder contains no crystalline silica and is fully amorphous. CS-325 deals clean post-consumer filler for polymer-based systems where the uppermost brightness is not essential. The filler imparts chemical stability and admirable abrasion resistance to coatings and other polymer systems. CS-325 has a specific gravity of 2.5, a bulk density of 60 lb/ft3, a hegman value of 3, a pH of 10 to 11, a refractive index of 1.56, and a brightness of 80 to 85. view less | |
| CS-400 | Glassfillers.com (A unit of Vitrominerals Inc.) | CS-400, glass powder, is a well-designed extender and glass filler made from 100% recycled glass. It is a white to off-white colored powder with an even particle size distribution. Scanning electron microscopy and X-ray diffraction endorse that the CS Gla...view more CS-400, glass powder, is a well-designed extender and glass filler made from 100% recycled glass. It is a white to off-white colored powder with an even particle size distribution. Scanning electron microscopy and X-ray diffraction endorse that the CS Glass powder contains no crystalline silica and is fully amorphous. CS-400 deals clean post-consumer filler for polymer-based systems where the uppermost brightness is not essential. The filler imparts chemical stability and admirable abrasion resistance to coatings and other polymer systems. CS-400 has a specific gravity of 2.5, a bulk density of 50 lb/ft3, a hegman value of 4 to 5, a pH of 10 to 11, a refractive index of 1.56, and a brightness of 85 to 90. view less | |
| Resiflow® P-64F | Estron Chemical, Inc. | Resiflow® P-64F is a specialty flow control agent designed for powder coating systems. It is based on the carboxyl functional acrylic polymer product Resiflow® L-64F which has been converted into free-flowing powder by adsorption onto silica-type carrier....view more Resiflow® P-64F is a specialty flow control agent designed for powder coating systems. It is based on the carboxyl functional acrylic polymer product Resiflow® L-64F which has been converted into free-flowing powder by adsorption onto silica-type carrier. Resiflow® P-64F provides unique characteristics in a variety of powder coating formulations. In isocryl H-1871 formulations it is a key ingredient in one-shot, low to mid-gloss formulations.In PE-TGIC, hybrid and epoxy clearcoats it provides a balance of flow and clarity. In GMA Acrylic-DDDA clearcoat formulations it provides recoatability, clarity and appearance. In classical, pigmented powder coatings, Resiflow® P-64F enhances pigment wetting and displaces substrate moisture. view less | |
| Drewplus™ S-4273 Foam Control Agent | Ashland | Drewplus™ S-4273 Foam Control Agent is designed for use in surface coatings and printing inks. This product is recommended for foam control in industrial wood coatings, semi-gloss, high-gloss architectural paints and adhesives. Excellent results have also...view more Drewplus™ S-4273 Foam Control Agent is designed for use in surface coatings and printing inks. This product is recommended for foam control in industrial wood coatings, semi-gloss, high-gloss architectural paints and adhesives. Excellent results have also been achieved in flexographic printing inks and overprint varnishes. view less | |
| Drewplus™ TS-4385 Foam Control Agent | Ashland | Drewplus™ TS-4385 Foam Control Agent is designed for use in coatings and printing inks. This product is particularly recommended for wood coatings, semi-gloss, high-gloss architectural paints and parquet lacquers. Excellent results have also been obtained...view more Drewplus™ TS-4385 Foam Control Agent is designed for use in coatings and printing inks. This product is particularly recommended for wood coatings, semi-gloss, high-gloss architectural paints and parquet lacquers. Excellent results have also been obtained in acrylic anti-corrosive primers, flexographic printing inks and water-reducible alkyd based systems. This product is highly efficient and exhibits excellent persistence. view less | |
| ADDITOL® VXW 6235 | Allnex | ADDITOL® VXW 6235 is a foam retardant that is mainly recommended for powder coating materials to be used in aqueous systems such as: emulsion paints, 2-component epoxy systems, plasterwork, filling compounds and scalants, flooring compounds, and adhesives...view more ADDITOL® VXW 6235 is a foam retardant that is mainly recommended for powder coating materials to be used in aqueous systems such as: emulsion paints, 2-component epoxy systems, plasterwork, filling compounds and scalants, flooring compounds, and adhesives. view less | Request Sample |
| ADDITOL® XW 376 | Allnex | Additol® XW 376 is a defoamer for waterborne emulsion paints and adhesives, and synthetic resin-bound renderings. | Request Sample |
| BYK®-018 | BYK | BYK®-018 is a mixture of hydrophobic solids and foam destroying polysiloxanes. It is especially suitable for pigmented emulsion systems based on styrene/ acrylate, acrylate or acrylate/polyurethane combinations with a low PVC. In industrial emulsion paint...view more BYK®-018 is a mixture of hydrophobic solids and foam destroying polysiloxanes. It is especially suitable for pigmented emulsion systems based on styrene/ acrylate, acrylate or acrylate/polyurethane combinations with a low PVC. In industrial emulsion paints that are applied by dipping, flow coating, and airless spraying BYK-018 is very efficient against microfoam. view less | Request Sample |
| BYK®-019 | BYK | BYK®-019 is a solution of a polyether modified polydimethylsiloxane. BYK-019 is recommended for aqueous coatings based on polyurethane dispersions and polyurethane /acrylic combinations. It is also effective for defoaming pigment concentrate formulations....view more BYK®-019 is a solution of a polyether modified polydimethylsiloxane. BYK-019 is recommended for aqueous coatings based on polyurethane dispersions and polyurethane /acrylic combinations. It is also effective for defoaming pigment concentrate formulations. To reduce microfoam, a combination of BYK-019 with BYK-024 in a ratio of 3:2 has been shown to give excellent results. view less | Request Sample |
| BYK®-021 | BYK | BYK®-021 is a mixture of foam destroying polysiloxanes and hydrophobic solids in polyglycol. It is particularly useful for pigmented emulsions based on styrene/acrylics, acrylics or acrylic/polyurethanes with PVC‘s of 18-25%. This defoamer has demonstrate...view more BYK®-021 is a mixture of foam destroying polysiloxanes and hydrophobic solids in polyglycol. It is particularly useful for pigmented emulsions based on styrene/acrylics, acrylics or acrylic/polyurethanes with PVC‘s of 18-25%. This defoamer has demonstrated high activity against microfoam in high gloss and semi-gloss aqueous coatings, specifically in airless and air-assisted spray applied coatings. view less | Request Sample |
| BYK®-022 | BYK | BYK®-022 is a mixture of foam destroying polysiloxanes and hydrophobic solids in polyglycol. It is especially suited for pigmented emulsion systems based on styrene/acrylics, acrylics or acrylic/polyurethanes with PVC‘s of 18-25%. It can also be used in a...view more BYK®-022 is a mixture of foam destroying polysiloxanes and hydrophobic solids in polyglycol. It is especially suited for pigmented emulsion systems based on styrene/acrylics, acrylics or acrylic/polyurethanes with PVC‘s of 18-25%. It can also be used in amine-neutralized systems and is very efficient against microfoam. view less | Request Sample |
| BYK®-023 | BYK | BYK®-023 is an emulsion of foam destroying polysiloxanes, hydrophobic solids and emulsifiers. This product is preferably used in pigmented emulsion paints with PVC‘s of 30-50% based on styrene/acrylics, acrylic or terpolymer binders. It also can be used i...view more BYK®-023 is an emulsion of foam destroying polysiloxanes, hydrophobic solids and emulsifiers. This product is preferably used in pigmented emulsion paints with PVC‘s of 30-50% based on styrene/acrylics, acrylic or terpolymer binders. It also can be used in hybrid systems. view less | Request Sample |
| BYK®-024 | BYK | BYK®-024 is a mixture of foam destroying polysiloxanes and hydrophobic solids in polyglycol. This product is suited for emulsion systems with PVC‘s from 0 to 25% based on polyurethane and acrylic/polyurethane. It is especially useful in rolling, brushing ...view more BYK®-024 is a mixture of foam destroying polysiloxanes and hydrophobic solids in polyglycol. This product is suited for emulsion systems with PVC‘s from 0 to 25% based on polyurethane and acrylic/polyurethane. It is especially useful in rolling, brushing or spraying applications. view less | Request Sample |
| BYK®-025 | BYK | BYK®-025 is a solution of foam destroying polysiloxanes. It is highly recommended for non-pigmented polyurethane and acrylic/ polyurethane emulsion systems. This defoamer is very easily incorporated and allows optimizing dosage by post-addition while the ...view more BYK®-025 is a solution of foam destroying polysiloxanes. It is highly recommended for non-pigmented polyurethane and acrylic/ polyurethane emulsion systems. This defoamer is very easily incorporated and allows optimizing dosage by post-addition while the paint is running on a curtain coater. view less | Request Sample |
| BYK®-028 | BYK | BYK®-028 is a mixture of foam destroying polysiloxanes and hydrophobic solids in polyglycol. This product is the standard defoamer for water-based systems and the basis (starting selection) for the testing of a defoamer series. BYK-028 is suitable for dis...view more BYK®-028 is a mixture of foam destroying polysiloxanes and hydrophobic solids in polyglycol. This product is the standard defoamer for water-based systems and the basis (starting selection) for the testing of a defoamer series. BYK-028 is suitable for dispersion paints with a PVC from 0 to 25 based on acrylate/polyurethane or polyurethane. BYK-028 is easy to incorporate. view less | Request Sample |
| BYK®-044 | BYK | BYK®-044 is an emulsion of hydrophobic particles and polysiloxanes. It is especially suitable for defoaming of the millbase during dispersion and further processing. The product defoams excellently glycol pastes and aqueous pigment concentrates. For defoa...view more BYK®-044 is an emulsion of hydrophobic particles and polysiloxanes. It is especially suitable for defoaming of the millbase during dispersion and further processing. The product defoams excellently glycol pastes and aqueous pigment concentrates. For defoaming of emulsion paints and dispersions lacquers BYK-044 is preferably used in pure acrylic and styrene acrylic emulsions. view less | Request Sample |
| BYK®-070 | BYK | BYK®-070 is a solution of foam destroying polymers and polysiloxanes. This product was developed for medium to high polar systems and is successfully used in the following resins: thermoplastic acrylics, chlorinated rubber, polyurethane, alkyd/urea, alkyd...view more BYK®-070 is a solution of foam destroying polymers and polysiloxanes. This product was developed for medium to high polar systems and is successfully used in the following resins: thermoplastic acrylics, chlorinated rubber, polyurethane, alkyd/urea, alkyd/melamine, and acrylic/melamine. Suggested application fields include machinery paints, radiator paints, industrial coatings, automotive systems and wood lacquers. view less | Request Sample |
| BYK®-085 | BYK | BYK®-085 is a polymethylalkylsiloxane. This product is the solvent-free version of BYK-077 and is used especially in systems in which solvent-free additives are requested or where a special solvent requirement exists. | Request Sample |
| BYK®-088 | BYK | BYK®-088 is a solution of foam destroying polymers and polysiloxanes. This product displays excellent results in all solvent-borne and solvent-free systems (including aromaticfree formulations). The effective substance complies with FDA § 175.300 and is t...view more BYK®-088 is a solution of foam destroying polymers and polysiloxanes. This product displays excellent results in all solvent-borne and solvent-free systems (including aromaticfree formulations). The effective substance complies with FDA § 175.300 and is therefore especially appropriate for can coatings. Excellent performance is also demonstrated in the following systems: general industrial coatings, wood and furniture coatings and solvent-free UV-curing formulations. view less | Request Sample |
| BYK®-094 | BYK | BYK®-094 is a compound of foam destroying polysiloxanes and hydrophobic solids. This product shows an excellent long-term efficiency, and it is as well suitable for flexo and gravure inks. BYK-094 is especially suitable for pigmented and non pigmented aqu...view more BYK®-094 is a compound of foam destroying polysiloxanes and hydrophobic solids. This product shows an excellent long-term efficiency, and it is as well suitable for flexo and gravure inks. BYK-094 is especially suitable for pigmented and non pigmented aqueous paints. It prevents foam during production and application of the paints. view less | Request Sample |
| BYK®-141 | BYK | BYK®-141 is a solution of foam destroying polymers and polysiloxanes. This product is used in general industrial coatings, paper coatings, flooring systems and curtain coatings for wooden substrates. Preferred binders are oil-free polyesters, vinyls, poly...view more BYK®-141 is a solution of foam destroying polymers and polysiloxanes. This product is used in general industrial coatings, paper coatings, flooring systems and curtain coatings for wooden substrates. Preferred binders are oil-free polyesters, vinyls, polyurethane, epoxy esters, nitrocellulose, and acid-curing systems. view less | Request Sample |
| BYK®-1610 | BYK | BYK®-1610 is an emulsion of hydrophobic solids, emulsifiers and foam destroying polysiloxanes. This product is recommended for use in emulsion paints with PVC‘s of 35 - 70. BYK-1610 also exhibits excellent efficiency in emulsion plasters. | Request Sample |
| BYK®-1615 | BYK | BYK®-1615 is an emulsion of hydrophobic solids, emulsifiers and foam destroying polysiloxanes. This product is recommended for highly filled emulsion paints with PVC‘s of 60 - 85. | Request Sample |
| DOWSIL™ 163 Additive | Univar Solutions | DOWSIL™ 163 Additive is a foam control additive for solvent-based and UV coatings and solvent-based and water-based inks. It may be used in ink and coating formulations that are acceptable for food contact. This product is a low-viscosity, 100% active sil...view more DOWSIL™ 163 Additive is a foam control additive for solvent-based and UV coatings and solvent-based and water-based inks. It may be used in ink and coating formulations that are acceptable for food contact. This product is a low-viscosity, 100% active silicone antifoam compound containing no solvents. view less | Request Sample |
| DOWSIL™ 163 Additive | Dow Performance Silicones | DOWSIL™ 163 Additive is a foam control additive for solvent-based and UV coatings and solvent-based and water-based inks. It may be used in ink and coating formulations that are acceptable for food contact. This product is a low-viscosity, 100% active sil...view more DOWSIL™ 163 Additive is a foam control additive for solvent-based and UV coatings and solvent-based and water-based inks. It may be used in ink and coating formulations that are acceptable for food contact. This product is a low-viscosity, 100% active silicone antifoam compound containing no solvents. view less | |
| DOWSIL™ 62 Additive | Dow Performance Silicones | DOWSIL™ 62 Additive is a water-based silicone antifoam, effective at low concentrations. It provides highly effective and long-lasting foam control. This product is readily dispersible in water-based inks and coatings. It offers good compatibility, with l...view more DOWSIL™ 62 Additive is a water-based silicone antifoam, effective at low concentrations. It provides highly effective and long-lasting foam control. This product is readily dispersible in water-based inks and coatings. It offers good compatibility, with low tendency to cause defects or affect coating gloss. view less | |
| TROYKYD® D777 | Arxada – Troy Corporation | Troykyd® D777 is a high efficiency fast acting defoamer for latex systems, water reducible systems, and all aqueous formulations. Use of this product is a response to the severe defoaming requirements of new coating systems. It demonstrates broad spectrum...view more Troykyd® D777 is a high efficiency fast acting defoamer for latex systems, water reducible systems, and all aqueous formulations. Use of this product is a response to the severe defoaming requirements of new coating systems. It demonstrates broad spectrum efficiency combined with permanency of action over extended storage periods. view less | Request Sample |
| BYK®-093 | BYK | BYK®-093 is a mixture of foam destroying polysiloxanes and hydrophobic solids in polyglycol. This product has a broad application profile. It is very compatible, and therefore exhibits a low tendency for surface defects (e. g. cratering, turbidity). This ...view more BYK®-093 is a mixture of foam destroying polysiloxanes and hydrophobic solids in polyglycol. This product has a broad application profile. It is very compatible, and therefore exhibits a low tendency for surface defects (e. g. cratering, turbidity). This additive combines a high efficiency with a broad compatibility in various coating systems. BYK-093 is highly suitable for clear and pigmented coatings, for all degrees of gloss and for all typical application methods. view less | Request Sample |
| LA-300 | Glassfillers.com (A unit of Vitrominerals Inc.) | LA-300, a glass powder, is an oxide that is combined in an amorphous state in a calcium aluminosilicate glass. Under a microscope, LA Glass powder particles are transparent, angular-shaped, with like dimensions in the x, y and z axis. X-ray diffraction an...view more LA-300, a glass powder, is an oxide that is combined in an amorphous state in a calcium aluminosilicate glass. Under a microscope, LA Glass powder particles are transparent, angular-shaped, with like dimensions in the x, y and z axis. X-ray diffraction and scanning electron microscopy indorses that the LA Glass calcium aluminosilicate powders contain no crystalline silica and are fully amorphous. LA Glass powders improve a wide range of plastics, paints, adhesives, and coatings. Stain/scrub resistance, tint retention, and high consistent brightness can be attained in most coating and paint systems. LA Glass powders can be effortlessly dispersed in solvent- or water- based systems and has low oil absorption (22). LA-300 has a specific gravity of 2.45, a bulk density of 50 lb/ft3, a pH of 10.5, and a refractive index of 1.47 to 1.51. view less | |
| LA-350 | Glassfillers.com (A unit of Vitrominerals Inc.) | LA-350, a high brightness glass powder, is an oxide that is combined in an amorphous state in a calcium aluminosilicate glass. Under a microscope, LA Glass powder particles are transparent, angular-shaped, with like dimensions in the x, y and z axis. X-ra...view more LA-350, a high brightness glass powder, is an oxide that is combined in an amorphous state in a calcium aluminosilicate glass. Under a microscope, LA Glass powder particles are transparent, angular-shaped, with like dimensions in the x, y and z axis. X-ray diffraction and scanning electron microscopy indorses that the LA Glass calcium aluminosilicate powders contain no crystalline silica and are fully amorphous. LA Glass powders improve a wide range of plastics, paints, adhesives, and coatings. Stain/scrub resistance, tint retention, and high consistent brightness can be attained in most coating and paint systems. LA Glass powders can be effortlessly dispersed in solvent- or water- based systems and has low oil absorption (23). LA-350 has a specific gravity of 2.45, a bulk density of 50 lb/ft3, a pH of 10.5, and a refractive index of 1.47 to 1.51. view less | |
| LA-400 | Glassfillers.com (A unit of Vitrominerals Inc.) | LA-400, a glass powder, is an oxide that is combined in an amorphous state in a calcium aluminosilicate glass. Under a microscope, LA Glass powder particles are transparent, angular-shaped, with like dimensions in the x, y and z axis. X-ray diffraction an...view more LA-400, a glass powder, is an oxide that is combined in an amorphous state in a calcium aluminosilicate glass. Under a microscope, LA Glass powder particles are transparent, angular-shaped, with like dimensions in the x, y and z axis. X-ray diffraction and scanning electron microscopy indorses that the LA Glass calcium aluminosilicate powders contain no crystalline silica and are fully amorphous. LA Glass powders improve a wide range of plastics, paints, adhesives, and coatings. Stain/scrub resistance, tint retention, and high consistent brightness can be attained in most coating and paint systems. LA Glass powders can be effortlessly dispersed in solvent- or water- based systems and has low oil absorption (24). LA-400 has a specific gravity of 2.45, a bulk density of 45 lb/ft3, a pH of 10.5, and a refractive index of 1.47 to 1.51. view less | |
| LA-500 | Glassfillers.com (A unit of Vitrominerals Inc.) | LA-500, a high brightness glass powder, is an oxide that is combined in an amorphous state in a calcium aluminosilicate glass. Under a microscope, LA Glass powder particles are transparent, angular-shaped, with like dimensions in the x, y and z axis. X-ra...view more LA-500, a high brightness glass powder, is an oxide that is combined in an amorphous state in a calcium aluminosilicate glass. Under a microscope, LA Glass powder particles are transparent, angular-shaped, with like dimensions in the x, y and z axis. X-ray diffraction and scanning electron microscopy indorses that the LA Glass calcium aluminosilicate powders contain no crystalline silica and are fully amorphous. LA Glass powders improve a wide range of plastics, paints, adhesives, and coatings. Stain/scrub resistance, tint retention, and high consistent brightness can be attained in most coating and paint systems. LA Glass powders can be effortlessly dispersed in solvent- or water- based systems and has low oil absorption (25). LA-500 has a specific gravity of 2.5, a bulk density of 45 lb/ft3, a pH of 10.5, and a refractive index of 1.51. view less | |
| LA-600 | Glassfillers.com (A unit of Vitrominerals Inc.) | LA-600, a high brightness glass powder, is an oxide that is combined in an amorphous state in a calcium aluminosilicate glass. Under a microscope, LA Glass powder particles are transparent, angular-shaped, with like dimensions in the x, y and z axis. X-ra...view more LA-600, a high brightness glass powder, is an oxide that is combined in an amorphous state in a calcium aluminosilicate glass. Under a microscope, LA Glass powder particles are transparent, angular-shaped, with like dimensions in the x, y and z axis. X-ray diffraction and scanning electron microscopy indorses that the LA Glass calcium aluminosilicate powders contain no crystalline silica and are fully amorphous. LA Glass powders improve a wide range of plastics, paints, adhesives, and coatings. Stain/scrub resistance, tint retention, and high consistent brightness can be attained in most coating and paint systems. LA Glass powders can be effortlessly dispersed in solvent- or water- based systems and has low oil absorption (27). LA-600 has a specific gravity of 2.5, a bulk density of 43 lb/ft3, a pH of 10.5, and a refractive index of 1.51. view less | |
| LA-700 | Glassfillers.com (A unit of Vitrominerals Inc.) | LA-700, a high brightness glass powder, is an oxide that is combined in an amorphous state in a calcium aluminosilicate glass. Under a microscope, LA Glass powder particles are transparent, angular-shaped, with like dimensions in the x, y and z axis. X-ra...view more LA-700, a high brightness glass powder, is an oxide that is combined in an amorphous state in a calcium aluminosilicate glass. Under a microscope, LA Glass powder particles are transparent, angular-shaped, with like dimensions in the x, y and z axis. X-ray diffraction and scanning electron microscopy indorses that the LA Glass calcium aluminosilicate powders contain no crystalline silica and are fully amorphous. LA Glass powders improve a wide range of plastics, paints, adhesives, and coatings. Stain/scrub resistance, tint retention, and high consistent brightness can be attained in most coating and paint systems. LA Glass powders can be effortlessly dispersed in solvent- or water- based systems and has low oil absorption (28). LA-700 has a specific gravity of 2.5, a bulk density of 40 lb/ft3, a pH of 10.5, and a refractive index of 1.51. view less | |
| LA-800 | Glassfillers.com (A unit of Vitrominerals Inc.) | LA-800, a high brightness glass powder, is an oxide that is combined in an amorphous state in a calcium aluminosilicate glass. Under a microscope, LA Glass powder particles are transparent, angular-shaped, with like dimensions in the x, y and z axis. X-ra...view more LA-800, a high brightness glass powder, is an oxide that is combined in an amorphous state in a calcium aluminosilicate glass. Under a microscope, LA Glass powder particles are transparent, angular-shaped, with like dimensions in the x, y and z axis. X-ray diffraction and scanning electron microscopy indorses that the LA Glass calcium aluminosilicate powders contain no crystalline silica and are fully amorphous. LA Glass powders improve a wide range of plastics, paints, adhesives, and coatings. Stain/scrub resistance, tint retention, and high consistent brightness can be attained in most coating and paint systems. LA Glass powders can be effortlessly dispersed in solvent- or water- based systems and has low oil absorption (29). LA-800 has a specific gravity of 2.5, a bulk density of 35 lb/ft3, a pH of 10.5, and a refractive index of 1.51. view less | |
| Sylysia | Fuji Silysia Chem. Ltd. | Sylysia is characterized by large internal surface area with a large number of pores, forming a three dimensional structure by the silicate. These properties are precisely controlled to meet a wide variety of applications. Sylysia has applications in resi...view more Sylysia is characterized by large internal surface area with a large number of pores, forming a three dimensional structure by the silicate. These properties are precisely controlled to meet a wide variety of applications. Sylysia has applications in resin and water-based paints, inks, plastic films, pharmaceuticals & cosmetics, adhesives, as well as sensitized, electrostatic recording, and impact paper. view less | |
| KBE-903 | Shin-Etsu Silicones of America | KBE-903 (3-aminopropyltriethoxysilane) is one of the most versatile coupling agents, having a broad range of applications in composites, coatings, adhesives, sealants, glass fibers and elastomers. KBE-903 has been utilized in many different materials incl...view more KBE-903 (3-aminopropyltriethoxysilane) is one of the most versatile coupling agents, having a broad range of applications in composites, coatings, adhesives, sealants, glass fibers and elastomers. KBE-903 has been utilized in many different materials including thermosets, thermoplastics, and elastomers such as acrylics, epoxies, phenolics, melamines, urethanes, polycarbonates, polyesters, nylons, polystyrenes, PET, PBT, ABS, polysulfides, and silicones. In the majority of these applications, the use of KBE-903 leads to exceptionally strong interaction between the inorganic and organic components of a given system. For example, KBE-903 is commonly used to improve the performance of silica or glass fiber reinforced materials. It can improve many properties such as adhesion to a wide variety of substrates like glass, ceramics, and metals; flexural, compressive, tensile, and interlaminar shear strengths; pigment and filler wetting and dispersion; as well as hydrolytic stability and long term performance during and after exposure to moisture. view less | |
| SYLOID® ZN-1 Molecular Sieve Desiccant | GRACE | SYLOID® ZN-1 Molecular Sieve Desiccant is a synthetic zeolite that appears as a white, free-flowing powder. It is a micronized molecular sieve based desiccant designed for use in zinc-rich organic primers. This product exhibits fast acting adsorption of t...view more SYLOID® ZN-1 Molecular Sieve Desiccant is a synthetic zeolite that appears as a white, free-flowing powder. It is a micronized molecular sieve based desiccant designed for use in zinc-rich organic primers. This product exhibits fast acting adsorption of trace moisture, prevention of hydrogen gas formation, shelf-life extension of zinc-rich primers and does not adversely affect paint quality. view less | |
| SYLOID® ZN-1 Molecular Sieve Desiccant | Univar Solutions | SYLOID® ZN-1 Molecular Sieve Desiccant is a synthetic zeolite that appears as a white, free-flowing powder. It is a micronized molecular sieve based desiccant designed for use in zinc-rich organic primers. This product exhibits fast acting adsorption of t...view more SYLOID® ZN-1 Molecular Sieve Desiccant is a synthetic zeolite that appears as a white, free-flowing powder. It is a micronized molecular sieve based desiccant designed for use in zinc-rich organic primers. This product exhibits fast acting adsorption of trace moisture, prevention of hydrogen gas formation, shelf-life extension of zinc-rich primers and does not adversely affect paint quality. view less | Request Sample |
| Barium Titanate Glass Spheres & Microspheres | Cospheric LLC | Barium titanate glass is a unique optical glass formulation based on a large percentage of Barium Oxide (BaO) and Titanium Oxide (TiO2), as opposed to other traditional glass formulas which are mostly Silica (SiO2). Barium titanate glass offers a much hig...view more Barium titanate glass is a unique optical glass formulation based on a large percentage of Barium Oxide (BaO) and Titanium Oxide (TiO2), as opposed to other traditional glass formulas which are mostly Silica (SiO2). Barium titanate glass offers a much higher refractive index compared to other glass formulations. Refractive Index is the ratio of the speed of light in a vacuum to the speed of light in the specified material - a description of how light slows down as it passes through an optical material. High refractive index microspheres are critical when used for optical systems where high refractive power is required such as endoscopy, micro-optics, defense and microscopy. Barium titanate glass microspheres will reflect back more light directly to the viewer. High index of refraction enables retroreflectivity which is often desired in guard rails, traffic signs, reflective paint, tape or clothing. Barium titanate glass hemispherically coated with aluminum ensures that the light bounces off the aluminum- coated half of the sphere and produces the retroreflective effect for high visibility in dark conditions. view less | |
| SYLOWHITE™ SM 405 Titanium Dioxide Extender | GRACE | SYLOWHITE™ SM 405 Titanium Dioxide Extender is a flavorless and odorless, precipitated synthetic amorphous sodium magnesium aluminum silicate. It appears as a white free-flowing powder. It is a fine-sized precipitated amorphous sodium magnesium aluminum s...view more SYLOWHITE™ SM 405 Titanium Dioxide Extender is a flavorless and odorless, precipitated synthetic amorphous sodium magnesium aluminum silicate. It appears as a white free-flowing powder. It is a fine-sized precipitated amorphous sodium magnesium aluminum silicate powder with excellent dispersion properties. With its high level of purity, controlled particle size distribution and high level of whiteness, SYLOWHITE™ SM 405 TiO2 Extender is mainly used as an advanced functional TiO2 pigment extender in paints and printing inks for the partial replacement of titanium dioxide. By replacing up to 25% of the titanium dioxide, SYLOWHITE™ SM 405 TiO2 Extender reduces the overall costs of the pigmented coating while improving the hiding power and optical brightness properties of the paint. view less | |
| SYLOWHITE™ SM 405 Titanium Dioxide Extender | Univar Solutions | SYLOWHITE™ SM 405 Titanium Dioxide Extender is a flavorless and odorless, precipitated synthetic amorphous sodium magnesium aluminum silicate. It appears as a white free-flowing powder. It is a fine-sized precipitated amorphous sodium magnesium aluminum s...view more SYLOWHITE™ SM 405 Titanium Dioxide Extender is a flavorless and odorless, precipitated synthetic amorphous sodium magnesium aluminum silicate. It appears as a white free-flowing powder. It is a fine-sized precipitated amorphous sodium magnesium aluminum silicate powder with excellent dispersion properties. With its high level of purity, controlled particle size distribution and high level of whiteness, SYLOWHITE™ SM 405 TiO2 Extender is mainly used as an advanced functional TiO2 pigment extender in paints and printing inks for the partial replacement of titanium dioxide. By replacing up to 25% of the titanium dioxide, SYLOWHITE™ SM 405 TiO2 Extender reduces the overall costs of the pigmented coating while improving the hiding power and optical brightness properties of the paint. view less | Request Sample |
| DOWSIL™ 7 Additive | Univar Solutions | DOWSIL™ 7 Additive is a foam control and leveling/wetting aid in solvent-based ink and coating systems. It is effective at low concentrations. The amount required depends on type of formulation, the solvent it contains, resin system and total system solid...view more DOWSIL™ 7 Additive is a foam control and leveling/wetting aid in solvent-based ink and coating systems. It is effective at low concentrations. The amount required depends on type of formulation, the solvent it contains, resin system and total system solids. view less | Request Sample |
| DOWSIL™ 7 Additive | Dow Performance Silicones | DOWSIL™ 7 Additive is a foam control and leveling/wetting aid in solvent-based ink and coating systems. It is effective at low concentrations. The amount required depends on type of formulation, the solvent it contains, resin system and total system solid...view more DOWSIL™ 7 Additive is a foam control and leveling/wetting aid in solvent-based ink and coating systems. It is effective at low concentrations. The amount required depends on type of formulation, the solvent it contains, resin system and total system solids. view less | |
| DOWSIL™ 56 Additive | Univar Solutions | DOWSIL™ 56 Additive is a 100% active alkylmethyl siloxane additive. It is intended for eliminating microfoam, improving leveling and improving mar resistance. This product has been used in solvent-based wood coatings, solventless paints, water-based wood ...view more DOWSIL™ 56 Additive is a 100% active alkylmethyl siloxane additive. It is intended for eliminating microfoam, improving leveling and improving mar resistance. This product has been used in solvent-based wood coatings, solventless paints, water-based wood coatings, and solvent-based industrial coatings. view less | Request Sample |
| DOWSIL™ 56 Additive | Dow Performance Silicones | DOWSIL™ 56 Additive is a 100% active alkylmethyl siloxane additive. It is intended for eliminating microfoam, improving leveling and improving mar resistance. This product has been used in solvent-based wood coatings, solventless paints, water-based wood ...view more DOWSIL™ 56 Additive is a 100% active alkylmethyl siloxane additive. It is intended for eliminating microfoam, improving leveling and improving mar resistance. This product has been used in solvent-based wood coatings, solventless paints, water-based wood coatings, and solvent-based industrial coatings. view less |
