| DOWSIL™ 100F Additive | Dow Performance Silicones | DOWSIL™ 100F Additive is a foam control agent in solvent-based and radiation curable coatings. It gives efficient foam control at very low silicone addition levels, even in high solids coatings formulations. It shows good compatibility in solventborne and...view more DOWSIL™ 100F Additive is a foam control agent in solvent-based and radiation curable coatings. It gives efficient foam control at very low silicone addition levels, even in high solids coatings formulations. It shows good compatibility in solventborne and radiation curable coatings and has a low tendency to cause craters or impact gloss or clarity of the coating. Due to the low addition levels required, it does not cause issues with recoatability. view less | |
| DOWSIL™ 102F Additive | Dow Performance Silicones | DOWSIL™ 102F Additive is a highly effective foam control agent for solvent based coating systems, which offers optimal defoaming and antifoaming at very low addition levels. It shows good compatibility in solvent based coatings and has low tendency to cau...view more DOWSIL™ 102F Additive is a highly effective foam control agent for solvent based coating systems, which offers optimal defoaming and antifoaming at very low addition levels. It shows good compatibility in solvent based coatings and has low tendency to cause craters or impact gloss or clarity of the coatings. view less | |
| DOWSIL™ 107F Additive | Dow Performance Silicones | DOWSIL™ 107F Additive is a low-cyclic silicone foam control agent with high effectiveness in waterborne acrylic clear wood coating varnishes, and acrylic, styrene acrylic and VAE emulsion paint for architectural wall coatings. It reduces defects and micro...view more DOWSIL™ 107F Additive is a low-cyclic silicone foam control agent with high effectiveness in waterborne acrylic clear wood coating varnishes, and acrylic, styrene acrylic and VAE emulsion paint for architectural wall coatings. It reduces defects and microbubbles in the coating film, thereby enhancing the durability of the substrate protection provided by the coating. It also has an excellent environmental and health profile which makes it suitable for the formulation of EU Ecolabel compliant indoor and outdoor paints and varnishes following the criteria set out in decision 2014/312/EU. view less | |
| DOWSIL™ 108F Additive | Dow Performance Silicones | DOWSIL™ 108F Additive is a versatile antifoam active on the reduction of foam generated during the manufacture and application of water based paints, coatings and inks. It works in major types of water based resins like acrylics, vinyl acetate/ethylene (V...view more DOWSIL™ 108F Additive is a versatile antifoam active on the reduction of foam generated during the manufacture and application of water based paints, coatings and inks. It works in major types of water based resins like acrylics, vinyl acetate/ethylene (VAE dispersions), polyurethane dispersions, and alkyd emulsions. This antifoam additive is particularly recommended for premium low PVC coatings, to provide a good density control of the coating formulation while maintaining a good appearance of the final surface. view less | |
| DOWSIL™ 11 Additive | Dow Performance Silicones | DOWSIL™ 11 Additive is a silicone additive provides slip, mar resistance and leveling in solvent-based applications. It can also correct glossing, pinholing and fisheyes, and reduced foaming during production. This product is suitable for inks, coatings, ...view more DOWSIL™ 11 Additive is a silicone additive provides slip, mar resistance and leveling in solvent-based applications. It can also correct glossing, pinholing and fisheyes, and reduced foaming during production. This product is suitable for inks, coatings, and paints. view less | |
| DOWSIL™ 14 Additive | Dow Performance Silicones | DOWSIL™ 14 Additive is a silicone additive which provides slip and leveling in water- and solvent-based applications. It also offers mar resistance in water-based systems. This product is composed of a reactive silicone glycol surfactant with carbinol fun...view more DOWSIL™ 14 Additive is a silicone additive which provides slip and leveling in water- and solvent-based applications. It also offers mar resistance in water-based systems. This product is composed of a reactive silicone glycol surfactant with carbinol functionality, supplied as 10% active concentration. view less | |
| DOWSIL™ 163 Additive | Dow Performance Silicones | DOWSIL™ 163 Additive is a foam control additive for solvent-based and UV coatings and solvent-based and water-based inks. It may be used in ink and coating formulations that are acceptable for food contact. This product is a low-viscosity, 100% active sil...view more DOWSIL™ 163 Additive is a foam control additive for solvent-based and UV coatings and solvent-based and water-based inks. It may be used in ink and coating formulations that are acceptable for food contact. This product is a low-viscosity, 100% active silicone antifoam compound containing no solvents. view less | |
| DOWSIL™ 18 Additive | Dow Performance Silicones | DOWSIL™ 18 Additive is a non-reactive high-molecular-weight polydimethyl siloxane dispersion containing no volatile solvent. It provides slip and mar resistance for solvent-based coatings as well as a mar resistance for water-based coatings and inks. | |
| DOWSIL™ 204SL Additive | Dow Performance Silicones | DOWSIL™ 204SL Additive is an easy-to-use, high performance silicone polyether additive that gives excellent, multiple properties in radiation curable coatings. It can also be used for solventborne coating formulations. This 100% silicone polyether copolym...view more DOWSIL™ 204SL Additive is an easy-to-use, high performance silicone polyether additive that gives excellent, multiple properties in radiation curable coatings. It can also be used for solventborne coating formulations. This 100% silicone polyether copolymer allows for low VOC, low addition levels and formulation flexibility. view less | |
| DOWSIL™ 205SL Additive | Dow Performance Silicones | DOWSIL™ 205SL Additive is an easy-to-use, high performance silicone polyether additive that gives excellent hand feel in multiple coating formulations at low addition levels. It also functions as an antifoam, bringing both enabling and problem solving ben...view more DOWSIL™ 205SL Additive is an easy-to-use, high performance silicone polyether additive that gives excellent hand feel in multiple coating formulations at low addition levels. It also functions as an antifoam, bringing both enabling and problem solving benefits to the formulator and reducing the amount of additives required in the formulation. view less | |
| DOWSIL™ 210S Additive | Dow Performance Silicones | DOWSIL™ 210S Additive is an ultra-high molecular weight silicone dispersion in water with improved compatibility and low tendency to cause craters. It can be used to customize slip and hand-feel for coating surface, while improving mar resistance and enha...view more DOWSIL™ 210S Additive is an ultra-high molecular weight silicone dispersion in water with improved compatibility and low tendency to cause craters. It can be used to customize slip and hand-feel for coating surface, while improving mar resistance and enhancing anti-blocking. view less | |
| DOWSIL™ 211S Additive | Dow Performance Silicones | DOWSIL™ 211S Additive is a novel low-cyclic, ultra-high molecular weight silicone delivered in a waterborne system that enhances mar resistance, slip and block resistance performance thereby helping to enable more durable, longer-lasting wood coatings. It...view more DOWSIL™ 211S Additive is a novel low-cyclic, ultra-high molecular weight silicone delivered in a waterborne system that enhances mar resistance, slip and block resistance performance thereby helping to enable more durable, longer-lasting wood coatings. It also offers high compatibility, solvent dilution, and performs at very low dosage which are essential features for coating formulators. view less | |
| DOWSIL™ 23 N Additive | Dow Performance Silicones | DOWSIL™ 23 N Additive is a silicone additive for solvent and aqueous coatings. It is a white elastomeric silicone powder that contains epoxy groups. This product is resistant to scratching and general marking, and provides a matte finish. | |
| DOWSIL™ 27 Additive | Dow Performance Silicones | DOWSIL™ 27 Additive is a nonreactive silicone glycol surfactant with both silicone and organic characteristics. It is supplied as a 100% active fluid. This product may be incorporated into solvent, aqueous, solventless and energy curable systems. | |
| DOWSIL™ 29 Additive | Dow Performance Silicones | DOWSIL™ 29 Additive is a carbinol functional silicone glycol surfactant used to provide leveling and wetting, and improve gloss. It is effective at low concentrations. The amount required depends on the type of formulation, the solvent it contains, resin ...view more DOWSIL™ 29 Additive is a carbinol functional silicone glycol surfactant used to provide leveling and wetting, and improve gloss. It is effective at low concentrations. The amount required depends on the type of formulation, the solvent it contains, resin system and total system solids. view less | |
| DOWSIL™ 3 Additive | Dow Performance Silicones | DOWSIL™ 3 Additive is a silanol functional silicone resin for dispersion of inorganic pigments to prevent flooding and floating. It has been tested successfully in solvent-based wood coatings and solvent-based industrial coatings. | |
| DOWSIL™ 33 Additive | Dow Performance Silicones | DOWSIL™ 33 Additive is a suspension of cured silicone elastomer particles suspended in water. Silicone particles are soft, flexible three-dimensional elastomers with epoxy functionality. This product imparts smooth finish, provides matte effect, increases...view more DOWSIL™ 33 Additive is a suspension of cured silicone elastomer particles suspended in water. Silicone particles are soft, flexible three-dimensional elastomers with epoxy functionality. This product imparts smooth finish, provides matte effect, increases mar resistance, contains epoxy functionality, and does not impact recoatability. view less | |
| DOWSIL™ 401LS Additive | Dow Performance Silicones | DOWSIL™ 401LS Additive is an easy-to-use, high performance silicone polyether additive that gives good flow, leveling and slip in solventborne and waterborne formulations at low addition levels. This product is suitable for pigmented and clear coat formul...view more DOWSIL™ 401LS Additive is an easy-to-use, high performance silicone polyether additive that gives good flow, leveling and slip in solventborne and waterborne formulations at low addition levels. This product is suitable for pigmented and clear coat formulations, wood coatings, plastic coatings, inks and overprint varnishes, and is compliant with legislation for food packaging inks. view less | |
| DOWSIL™ 402LS Additive | Dow Performance Silicones | DOWSIL™ 402LS Additive is a silicone additive which reduces the coefficient of friction of wood coatings, and offers blocking resistance, while improving the flow and levelling properties for the formulation. It performs at very low levels and exhibit a f...view more DOWSIL™ 402LS Additive is a silicone additive which reduces the coefficient of friction of wood coatings, and offers blocking resistance, while improving the flow and levelling properties for the formulation. It performs at very low levels and exhibit a favorable environmental and health profile: it contains no solvent, no benzene, toluene, xylene, and meets European food contact regulations. view less | |
| DOWSIL™ 402LS Additive | Dow Performance Silicones | DOWSIL™ 402LS Additive is an easy-to-use, high performance silicone polyether additive that gives good flow, leveling and slip in waterborne and radiation curable formulations at low addition levels. This product is recommended for pigmented and clear coa...view more DOWSIL™ 402LS Additive is an easy-to-use, high performance silicone polyether additive that gives good flow, leveling and slip in waterborne and radiation curable formulations at low addition levels. This product is recommended for pigmented and clear coat formulations, wood coatings, industrial metal coatings, inks and overprint varnishes, and is compliant with legislation for food packaging inks. view less | |
| DOWSIL™ 500W Additive | Dow Performance Silicones | DOWSIL™ 500W Additive is a low molecular weight organofunctional silicone that gives excellent wetting properties in both waterborne and radiation curable coating formulations. This 100% active, low VOC additive offers formulation flexibility and effectiv...view more DOWSIL™ 500W Additive is a low molecular weight organofunctional silicone that gives excellent wetting properties in both waterborne and radiation curable coating formulations. This 100% active, low VOC additive offers formulation flexibility and effective performance at low addition levels. The excellent surface mobility of this additive can be demonstrated by the low surface tensions of aqueous solutions. view less | |
| DOWSIL™ 501W Additive | Dow Performance Silicones | DOWSIL™ 501W Additive is a low molecular weight organofunctional silicone that gives excellent wetting properties in both waterborne and radiation curable coating formulations. This 100% active, low VOC additive offers formulation flexibility and effectiv...view more DOWSIL™ 501W Additive is a low molecular weight organofunctional silicone that gives excellent wetting properties in both waterborne and radiation curable coating formulations. This 100% active, low VOC additive offers formulation flexibility and effective performance at low addition levels. The excellent surface mobility of this additive can be demonstrated by the low surface tensions of aqueous solutions. view less | |
| DOWSIL™ 502W Additive | Dow Performance Silicones | DOWSIL™ 502W Additive is a low molecular weight organofunctional silicone that gives excellent wetting properties in both waterborne and radiation curable coating formulations. This 100% active, low VOC additive offers formulation flexibility and effectiv...view more DOWSIL™ 502W Additive is a low molecular weight organofunctional silicone that gives excellent wetting properties in both waterborne and radiation curable coating formulations. This 100% active, low VOC additive offers formulation flexibility and effective performance at low addition levels. The excellent surface mobility of this additive can be demonstrated by the low surface tensions of aqueous solutions. view less | |
| DOWSIL™ 51 Additive | Dow Performance Silicones | DOWSIL™ 51 Additive is an ultra-high-molecular-weight polydimethylsiloxane dispersion in paste form, supplied at 80% solids. It reduces coefficient of friction, provides antiblocking and improves mar resistance. | |
| DOWSIL™ 52 Additive | Dow Performance Silicones | DOWSIL™ 52 Additive is an ultra-high molecular weight silicone dispersion in water, supplied at 65% solids. It reduces static and dynamic coefficient of friction and improves mar resistance in coatings and inks applications. | |
| DOWSIL™ 54 Additive | Dow Performance Silicones | DOWSIL™ 54 Additive is a 100% active silicone glycol copolymer. It provides slip, mar resistance and leveling for ink applications. This produces has been successful in solvent-based inkjet inks, solvent-based screen printing inks, and water-based screen ...view more DOWSIL™ 54 Additive is a 100% active silicone glycol copolymer. It provides slip, mar resistance and leveling for ink applications. This produces has been successful in solvent-based inkjet inks, solvent-based screen printing inks, and water-based screen printing inks. view less | |
| DOWSIL™ 55 Additive | Dow Performance Silicones | DOWSIL™ 55 Additive is a reactive silicone glycol surfactant with carbinol functionality, supplied at 10% active concentration. It imparts mar and abrasion resistance by reducing surface friction, improves flow-out, wetting and gloss, reduces cratering, a...view more DOWSIL™ 55 Additive is a reactive silicone glycol surfactant with carbinol functionality, supplied at 10% active concentration. It imparts mar and abrasion resistance by reducing surface friction, improves flow-out, wetting and gloss, reduces cratering, and prevents pinholing, orange peel, and cissing. view less | |
| DOWSIL™ 56 Additive | Dow Performance Silicones | DOWSIL™ 56 Additive is a 100% active alkylmethyl siloxane additive. It is intended for eliminating microfoam, improving leveling and improving mar resistance. This product has been used in solvent-based wood coatings, solventless paints, water-based wood ...view more DOWSIL™ 56 Additive is a 100% active alkylmethyl siloxane additive. It is intended for eliminating microfoam, improving leveling and improving mar resistance. This product has been used in solvent-based wood coatings, solventless paints, water-based wood coatings, and solvent-based industrial coatings. view less | |
| DOWSIL™ 57 Additive | Dow Performance Silicones | DOWSIL™ 57 Additive is a nonreactive silicone glycol copolymer surfactant supplied at 100% active concentration. It provides slip, gloss enhancement, pigment treatment and leveling for ink and coatings applications. This product is compatible with acrylic...view more DOWSIL™ 57 Additive is a nonreactive silicone glycol copolymer surfactant supplied at 100% active concentration. It provides slip, gloss enhancement, pigment treatment and leveling for ink and coatings applications. This product is compatible with acrylic, alkyd, amide, epoxy, nitrocellulose, phenolic, polyester, polyurethane and vinyl systems. view less | |
| DOWSIL™ 61 Paint Additive | Dow Performance Silicones | DOWSIL™ 61 Paint Additive is a silicone hammertone additive. It is intended Intended primarily for solvent based paints, but can be incorporated into some water-borne systems. Addition levels are critical and have to be carefully determined for each produ...view more DOWSIL™ 61 Paint Additive is a silicone hammertone additive. It is intended Intended primarily for solvent based paints, but can be incorporated into some water-borne systems. Addition levels are critical and have to be carefully determined for each product; care must also be taken to avoid contamination of other non-hammertone view less | |
| DOWSIL™ 62 Additive | Dow Performance Silicones | DOWSIL™ 62 Additive is a water-based silicone antifoam, effective at low concentrations. It provides highly effective and long-lasting foam control. This product is readily dispersible in water-based inks and coatings. It offers good compatibility, with l...view more DOWSIL™ 62 Additive is a water-based silicone antifoam, effective at low concentrations. It provides highly effective and long-lasting foam control. This product is readily dispersible in water-based inks and coatings. It offers good compatibility, with low tendency to cause defects or affect coating gloss. view less | |
| DOWSIL™ 67 Additive | Dow Performance Silicones | DOWSIL™ 67 Additive is a low molecular weight organofunctional silicone that gives excellent wetting properties in both waterborne and radiation curable coating formulations. This 100% active, low VOC additive offers formulation flexibility and effective ...view more DOWSIL™ 67 Additive is a low molecular weight organofunctional silicone that gives excellent wetting properties in both waterborne and radiation curable coating formulations. This 100% active, low VOC additive offers formulation flexibility and effective performance at low addition levels. The excellent surface mobility of this additive can be demonstrated by the low surface tensions of aqueous solutions. view less | |
| DOWSIL™ 68 Additive | Dow Performance Silicones | DOWSIL™ 68 Additive is an alkyl phenol ethoxylate-free silicone foam control agent. It is used for reducing foam and maintaining foam control during the production, handling and application of water-based inks, coatings and paints. | |
| DOWSIL™ 7 Additive | Dow Performance Silicones | DOWSIL™ 7 Additive is a foam control and leveling/wetting aid in solvent-based ink and coating systems. It is effective at low concentrations. The amount required depends on type of formulation, the solvent it contains, resin system and total system solid...view more DOWSIL™ 7 Additive is a foam control and leveling/wetting aid in solvent-based ink and coating systems. It is effective at low concentrations. The amount required depends on type of formulation, the solvent it contains, resin system and total system solids. view less | |
| DOWSIL™ 700P Additive | Dow Performance Silicones | DOWSIL™ 700P Additive is alkoxy siloxane with organic group and it provides high efficiency to disperse inorganic pigment, especially titanium dioxide. Only 10–15% dosage of ordinary dispersants is needed to get fine particles and high gloss/low haze of p...view more DOWSIL™ 700P Additive is alkoxy siloxane with organic group and it provides high efficiency to disperse inorganic pigment, especially titanium dioxide. Only 10–15% dosage of ordinary dispersants is needed to get fine particles and high gloss/low haze of paint. It also keeps good stabilization of pigment dispersion so that it can effectively prevent pigment flooding and floating when tinting. Unlike traditional anti-flooding additives which operate by controlled flocculation, this product does not increase viscosity and does not negatively impact gloss. view less | |
| DOWSIL™ 71 Additive | Dow Performance Silicones | DOWSIL™ 71 Additive is a polymeric silicone foam control agent. It provides effective foam control in a variety of waterborne coatings. This product is particularly suited for waterborne inks balancing effective foam control and good surface appearance. | |
| DOWSIL™ 74 Additive | Dow Performance Silicones | DOWSIL™ 74 Additive is a polymeric silicone foam control agent. It shows good compatibility in waterborne coating and ink systems and has a low tendency to cause surface defects. This product is particularly suited for applications where high shear stabil...view more DOWSIL™ 74 Additive is a polymeric silicone foam control agent. It shows good compatibility in waterborne coating and ink systems and has a low tendency to cause surface defects. This product is particularly suited for applications where high shear stability and ease of incorporation are needed. view less | |
| DOWSIL™ 84 Additive | Dow Performance Silicones | DOWSIL™ 84 Additive is a silicone additive for aqueous inks. It is used as an additive for water-based and dilutable inks to provide water and mild chemical resistance. It may be used as a protective and water-resistant coating for a variety of woven and ...view more DOWSIL™ 84 Additive is a silicone additive for aqueous inks. It is used as an additive for water-based and dilutable inks to provide water and mild chemical resistance. It may be used as a protective and water-resistant coating for a variety of woven and non-woven textiles and fabrics. view less | |
| DOWSIL™ 85 Additive | Dow Performance Silicones | DOWSIL™ 85 Additive is a silicone additive for aqueous inks. It is used as an additive for water-based and dilutable inks to provide water and mild chemical resistance. It may also be used as a protective and water-resistant coating for a variety of woven...view more DOWSIL™ 85 Additive is a silicone additive for aqueous inks. It is used as an additive for water-based and dilutable inks to provide water and mild chemical resistance. It may also be used as a protective and water-resistant coating for a variety of woven and non-woven textiles and fabrics. view less | |
| DOWSIL™ 8526 Additive | Dow Performance Silicones | DOWSIL™ 8526 Additive is an easy-to-use, high performance silicone polyether additive that gives improved leveling and slip in waterborne solvent based and UV curing formulations at low addition levels. It may be used as effective slip or leveling agent i...view more DOWSIL™ 8526 Additive is an easy-to-use, high performance silicone polyether additive that gives improved leveling and slip in waterborne solvent based and UV curing formulations at low addition levels. It may be used as effective slip or leveling agent in waterborne coating, solvent-based coating and UV curable coating. view less | |
| DOWSIL™ 8590 Additive | Dow Performance Silicones | DOWSIL™ 8590 Additive is a self-dispersible, 100 percent active silicone antifoam compound combining good compatibility and good defoaming efficiency, enabling foam control at low temperature in waterborne coatings and inks systems without impacting surfa...view more DOWSIL™ 8590 Additive is a self-dispersible, 100 percent active silicone antifoam compound combining good compatibility and good defoaming efficiency, enabling foam control at low temperature in waterborne coatings and inks systems without impacting surface gloss. DOWSIL™ 8590 Additive can be used as sole defoamer for both grind and let down stages. Usage level can be 50 to 70 percent less than conventional defoamers for comparable or better performance. view less | |
| DOWSIL™ 8590 Additive | Dow Performance Silicones | DOWSIL™ 8590 Additive is a 100% active silicone antifoam compound with silica. It shows good compatibility in waterborne coatings and ink systems and has a low tendency to cause surface defects. This product is recommended for a acrylic styrene emulsion p...view more DOWSIL™ 8590 Additive is a 100% active silicone antifoam compound with silica. It shows good compatibility in waterborne coatings and ink systems and has a low tendency to cause surface defects. This product is recommended for a acrylic styrene emulsion paint for architectural wall coatings, waterborne flexo gravure inks, waterborne acrylic overprint varnishes, and acrylic urethane emulsion paints for wood. view less | |
| DOWSIL™ 8603 Additive | Dow Performance Silicones | DOWSIL™ 8603 Additive is a 100% active silicone antifoam compound with silica. It offers effective foam control for waterborne coating systems, and performs at low dosages. This product is recommended for waterborne interior wall paints, acrylic styrene e...view more DOWSIL™ 8603 Additive is a 100% active silicone antifoam compound with silica. It offers effective foam control for waterborne coating systems, and performs at low dosages. This product is recommended for waterborne interior wall paints, acrylic styrene emulsion paints, waterborne flexo gravure inks, waterborne polyester acrylic coatings, and waterborne acrylic modified alkyd coatings. view less | |
| DOWSIL™ 8621 Additive | Dow Performance Silicones | DOWSIL™ 8621 Additive is a fluorosilicone supplied at 5% active concentration. It gives efficient foam control at very low addition level without surface defects in solvent based paints and UV curable coating. This product is also effective at low tempera...view more DOWSIL™ 8621 Additive is a fluorosilicone supplied at 5% active concentration. It gives efficient foam control at very low addition level without surface defects in solvent based paints and UV curable coating. This product is also effective at low temperatures, which makes it suitable for the winter season. view less | |
| DOWSIL™ 8628 Additive | Dow Performance Silicones | DOWSIL™ 8621 Additive is a fluorosilicone supplied at 5% active concentration. It gives efficient foam control at very low addition level without surface defects in solvent based paints and UV curable coating. This product is also effective at low tempera...view more DOWSIL™ 8621 Additive is a fluorosilicone supplied at 5% active concentration. It gives efficient foam control at very low addition level without surface defects in solvent based paints and UV curable coating. This product is also effective at low temperatures, which makes it suitable for the winter season. view less | |
| DOWSIL™ 87 Additive | Dow Performance Silicones | DOWSIL™ 87 Additive is a 40% active silane based emulsion. It can be used in waterborne acrylic formulations to improve water repellency. This product is solvent and APEO free, and is recommended for waterborne decorative coatings. | |
| DOWSIL™ 88 Additive | Dow Performance Silicones | DOWSIL™ 88 Additive is a 98% active silane/siloxane concentrate. It can be used in polar and non-polar solvent containing acrylic formulations to improve water repellency. This product can be used for the formulation of solvent-borne decorative coatings a...view more DOWSIL™ 88 Additive is a 98% active silane/siloxane concentrate. It can be used in polar and non-polar solvent containing acrylic formulations to improve water repellency. This product can be used for the formulation of solvent-borne decorative coatings and in waterborne formulations containing polar solvents. view less | |
| DOWSIL™ Z-6121 Silane | Dow Performance Silicones | DOWSIL™ Z-6121 Silane is a multi-purpose silane adhesion promoter recommended for use with epoxy coatings, silicone resin-based coatings and alkyd finishes. It can be incorporated into epoxy coatings, can be used as a room-temperature curing agent for sil...view more DOWSIL™ Z-6121 Silane is a multi-purpose silane adhesion promoter recommended for use with epoxy coatings, silicone resin-based coatings and alkyd finishes. It can be incorporated into epoxy coatings, can be used as a room-temperature curing agent for silicone resin based coatings, and can be used with alkyd coatings. view less | |
| DOWSIL™ Z-6137 Silane | Dow Performance Silicones | DOWSIL™ Z-6137 Silane is an aqueous solution of a homopolymer of an aminofunctional silane. It should be used as an additive or primer in water-based systems to improve bonding between organic binder and inorganic substrate. | |
| REAXIS® C114 | Reaxis Inc. | REAXIS® C114 is a versatile, liquid tin-based catalyst that is used in a number of applications including: esterifications, polyurethane coatings and resins. As well as aiding and improving the cure time of silicone resins and salines. | |
| REAXIS® C125 | Reaxis Inc. | REAXIS® C125 is a liquid tin-based catalyst that is used in a number of applications, including: esterifications, Polyurethanes (CASE) and Silicone condensation reactions. It can give enhanced storage stability in various RTV silicone formulations. It can...view more REAXIS® C125 is a liquid tin-based catalyst that is used in a number of applications, including: esterifications, Polyurethanes (CASE) and Silicone condensation reactions. It can give enhanced storage stability in various RTV silicone formulations. It can also be utilized either neat or as a mixture in alcohols. REAXIS® C125 is typically used at concentrations ranging from 0.01 - 0.20 wt%. view less | |
| REAXIS® C129LC | Reaxis Inc. | REAXIS® C129LC is a versatile, liquid tin-based catalyst that is used in a number of applications, including: oleochemical esterifiction, polyurethane coatings and resins. It can also improve the curing time of silicone resins and salines. As well as act ...view more REAXIS® C129LC is a versatile, liquid tin-based catalyst that is used in a number of applications, including: oleochemical esterifiction, polyurethane coatings and resins. It can also improve the curing time of silicone resins and salines. As well as act as a catalysis of lactone polymerization to form biodegradable polymers. REAXIS® C129LC can be utilized neat or as a mixture in alcohols. This product is typically used at concentrations ranging from 0.01 - 0.20 wt% at 80 - 240 °C. view less | |
| REAXIS® C160 | Reaxis Inc. | REAXIS® C160 is a high-activity solid inorganic tin based catalyst used in the synthesis of organic esters and plasticizers. Made of Stannous Oxalate, this product can be used to complete conversions with short reaction times due to high catalytic activit...view more REAXIS® C160 is a high-activity solid inorganic tin based catalyst used in the synthesis of organic esters and plasticizers. Made of Stannous Oxalate, this product can be used to complete conversions with short reaction times due to high catalytic activity with minimal secondary reactions and colored by-products when compared to acid catalysts. REAXIS® C160 is non-corrosive and can be used at concentrations ranging from 0.01 - 0.2 wt% at 160 - 260°C. view less | |
| REAXIS® C162 | Reaxis Inc. | REAXIS® C162 is an inorganic, white powder, tin catalyst used in the synthesis of polyesters and and oleo-based esters. Made of Stannous Chloride Anhydrous, REAXIS® C162 can be used in the crosslinking of elastomers, synthesis of polyester polyols and sol...view more REAXIS® C162 is an inorganic, white powder, tin catalyst used in the synthesis of polyesters and and oleo-based esters. Made of Stannous Chloride Anhydrous, REAXIS® C162 can be used in the crosslinking of elastomers, synthesis of polyester polyols and solubility in polar solvents. It also finds use in Sn/Pd activator formulations for POP as well as a preferred tin source for tin/nickel alloy plating and as a surface color modifier for art glass. view less | |
| REAXIS® C208 | Reaxis Inc. | REAXIS® C208 is a octyl-based organotin dissolved in xylene (50%). A yellowish liquid, it can be used for the production of polyurethane coatings, RTV silicones and saline-modified polyethylene. Custom formulations of REAXIS® C208 are available upon reque...view more REAXIS® C208 is a octyl-based organotin dissolved in xylene (50%). A yellowish liquid, it can be used for the production of polyurethane coatings, RTV silicones and saline-modified polyethylene. Custom formulations of REAXIS® C208 are available upon request. view less | |
| REAXIS® C211 | Reaxis Inc. | REAXIS® C211 is a proprietary catalyst based on a modified organotin compound. A yellowish liquid, it has been designed for catalysis of polyurethane reactions. Advantages include: high selectiveity for the isocyanate/alcohol reaction, low foaming, extend...view more REAXIS® C211 is a proprietary catalyst based on a modified organotin compound. A yellowish liquid, it has been designed for catalysis of polyurethane reactions. Advantages include: high selectiveity for the isocyanate/alcohol reaction, low foaming, extended pot life and low color. view less | |
| REAXIS® C214 | Reaxis Inc. | REAXIS® C214 is a versatile tin mercaptide catalyst that can be used in various polyurethane coatings formulations that demand hydrolytic stability and selectivity. A clear to slightly yellow liquid, it is usually more reactive than DBTL (REAXIS® C218) fo...view more REAXIS® C214 is a versatile tin mercaptide catalyst that can be used in various polyurethane coatings formulations that demand hydrolytic stability and selectivity. A clear to slightly yellow liquid, it is usually more reactive than DBTL (REAXIS® C218) for most polyurethane systems, resulting in quicker cure times.In addition, REAXIS® C214 can be used in waterborne systems. view less | |
| REAXIS® C216 | Reaxis Inc. | REAXIS® C216 is a liquid organotin catalyst that contains dioctyltin functionality. This provides improved toxicological properties compared with dibutyltin based catalysts. This product is used at concentrations ranging from 0.01 - 1.0 wt% at 80 - 240°C....view more REAXIS® C216 is a liquid organotin catalyst that contains dioctyltin functionality. This provides improved toxicological properties compared with dibutyltin based catalysts. This product is used at concentrations ranging from 0.01 - 1.0 wt% at 80 - 240°C. Additional features and applications of REAXIS® C216 can be used as a catalysis for polyurethane reactions, curing of silicone resins, esterification and transesterification reactions and the production of silicone-modified polyethylenes. view less | |
| REAXIS® C218 | Reaxis Inc. | REAXIS® C218 is a versatile organotin catalyst that can be used in various applications, including polyurethane coatings and polymers. This product is typically used at concentrations ranging from 0.01 - 1.0 wt% at 160 - 260°C. Additionally REAXIS® C218 c...view more REAXIS® C218 is a versatile organotin catalyst that can be used in various applications, including polyurethane coatings and polymers. This product is typically used at concentrations ranging from 0.01 - 1.0 wt% at 160 - 260°C. Additionally REAXIS® C218 can be used as a catalysis for isocyanate/alcohol reactions, esterification and transesterification reactions, silicone condensations (e.g. RTV resins) and the production of saline modified polyethylenes view less | |
| REAXIS® C220 | Reaxis Inc. | REAXIS® C220 is a liquid catalyst that contains monobutyltin functionality. The main uses are in catalysis of esterification and polycondensation reactions. REAXIS® C220 is well suited for the production of plasticizers, catalysis of saturated and unsatur...view more REAXIS® C220 is a liquid catalyst that contains monobutyltin functionality. The main uses are in catalysis of esterification and polycondensation reactions. REAXIS® C220 is well suited for the production of plasticizers, catalysis of saturated and unsaturated polyesters. I can also improve the curing time of polyurethane based powder coatings. view less | |
| REAXIS® C221 | Reaxis Inc. | REAXIS® C221 is a versatile organotin catalyst that can be used in various silicone and polyurethane applications. REAXIS® C221 is well suited for use as a catalysis of urethanes where low color is required, esterification and transesterification reaction...view more REAXIS® C221 is a versatile organotin catalyst that can be used in various silicone and polyurethane applications. REAXIS® C221 is well suited for use as a catalysis of urethanes where low color is required, esterification and transesterification reactions, silicone condensations (e.g. RTV resins) and the production of saline modified polyethylenes. view less | |
| REAXIS® C223 | Reaxis Inc. | REAXIS® C223 is a yellowish liquid catalyst that is utilized suited for the synthesis of polyurethane systems, polycondensation reactions of RTV silicone resins and salines. REAXIS® 223 is also available in special formulations upon request. | |
| REAXIS® C225 | Reaxis Inc. | REAXIS® C225 is a versatile organotin catalyst that can be used in various applications, including polyurethane coatings and polymers. It has a higher catalytic activity compared to other grades of DBTL, due to significantly higher tin content. This produ...view more REAXIS® C225 is a versatile organotin catalyst that can be used in various applications, including polyurethane coatings and polymers. It has a higher catalytic activity compared to other grades of DBTL, due to significantly higher tin content. This product is used at concentrations ranging from 0.01 - 1.0 wt%. REAXIS® C225 is well suited for use as a catalysis of isocyanate/alcohol reactions, esterification and transesterification reactions, silicone condensations (e.g. RTV resins) and saline modified polyethylenes. view less | |
| REAXIS® C226 | Reaxis Inc. | REAXIS® C226 is a yellowish liquid catalyst that is well suited for the synthesis of polyurethane systems and the polycondensation reactions of RTV silicone resins and salines. REAXIS® C226 is also available in special formulations upon request. | |
| REAXIS® C227 | Reaxis Inc. | REAXIS® C227 is yellowish liquid catalyst used in polyurethane systems. This catalyst exhibits a high activity and improved hydrological stability. REAXIS® C227 is well suited for use in solvent borne polyurethane coatings as well as water borne polyureth...view more REAXIS® C227 is yellowish liquid catalyst used in polyurethane systems. This catalyst exhibits a high activity and improved hydrological stability. REAXIS® C227 is well suited for use in solvent borne polyurethane coatings as well as water borne polyurethane coatings. view less | |
| REAXIS® C228 | Reaxis Inc. | REAXIS® C228 is a yellowish liquid catalyst used in polyurethane systems. This catalyst is a very active catalyst and is a less toxic analogue to REAXIS® C223 (dibutyltin diacetate). REAXIS® C228 is well suited for use in producing polyurethane resins and...view more REAXIS® C228 is a yellowish liquid catalyst used in polyurethane systems. This catalyst is a very active catalyst and is a less toxic analogue to REAXIS® C223 (dibutyltin diacetate). REAXIS® C228 is well suited for use in producing polyurethane resins and crosslinking, silicone condensations and esterifications view less | |
| REAXIS® C232 | Reaxis Inc. | REAXIS® C232 is a solid, amorphous organotin catalyst that is well suited for esterification and transesterification reactions, polycondesation reactions and the production of polyester and alkyd resins. The toxicological properties of REAXIS® C232 are b...view more REAXIS® C232 is a solid, amorphous organotin catalyst that is well suited for esterification and transesterification reactions, polycondesation reactions and the production of polyester and alkyd resins. The toxicological properties of REAXIS® C232 are better compared to its dibutyltin counterparts. It is typically used at concentrations ranging from 0.01 - 0.5 wt%, depending on the application. view less | |
| REAXIS® C233 | Reaxis Inc. | REAXIS® C233 is a liquid organotin catalyst that is well suited for the catalysis of isocyanate/alcohol reactions, transesterification reactions at 80 - 240°C, polycondensation reactions of RTV silicone resins and salines as well as the production of poly...view more REAXIS® C233 is a liquid organotin catalyst that is well suited for the catalysis of isocyanate/alcohol reactions, transesterification reactions at 80 - 240°C, polycondensation reactions of RTV silicone resins and salines as well as the production of polycarbonate raw materials. REAXIS® C233 is slightly sensitive to moisture. It is typically used at concentrations ranging from 0.1 - 1.0 wt%. view less | |
| REAXIS® C233T | Reaxis Inc. | REAXIS® C233T is a liquid organotin catalyst that is well suited for the catalysis of isocyanate/alcohol reactions, transesterification reactions at 80 - 240°C, polycondensation reactions of RTV silicone resins and silanes as well as the production of pol...view more REAXIS® C233T is a liquid organotin catalyst that is well suited for the catalysis of isocyanate/alcohol reactions, transesterification reactions at 80 - 240°C, polycondensation reactions of RTV silicone resins and silanes as well as the production of polycarbonate raw materials. view less | |
| REAXIS® C248 | Reaxis Inc. | REAXIS® C248 is a solid, amorphous organotin catalyst that is used mainly in esterification and polycondensation reactions. Made of Dibutyltin Oxide, REAXIS® C248 is well suited for the transesterification of vinyl acetate or acrylic acid copolymers, the ...view more REAXIS® C248 is a solid, amorphous organotin catalyst that is used mainly in esterification and polycondensation reactions. Made of Dibutyltin Oxide, REAXIS® C248 is well suited for the transesterification of vinyl acetate or acrylic acid copolymers, the synthesis of alkyd and polyester resins, as well as the production of polycarbonates, electrodeposition coatings. REAXIS® C248 is typically used at concentrations ranging from 0.01 - 0.5 wt% at 90 - 260°C. view less | |
| REAXIS® C248D | Reaxis Inc. | REAXIS® C248D is a clear liquid form of an organotin blended in a plasticizer. It is used mainly in esterification and polycondensation reactions. Made of Dibutyltin Oxide, REAXIS® C248D is well suited for the transesterification of vinyl acetate or acryl...view more REAXIS® C248D is a clear liquid form of an organotin blended in a plasticizer. It is used mainly in esterification and polycondensation reactions. Made of Dibutyltin Oxide, REAXIS® C248D is well suited for the transesterification of vinyl acetate or acrylic acid copolymers, the synthesis of alkyd and polyester resins, as well as the production of polycarbonates, electrodeposition coatings. REAXIS® C248D is typically used at concentrations ranging from 0.01 - 0.5 wt% at 90 - 260°C. view less | |
| REAXIS® C248LC | Reaxis Inc. | REAXIS® C248LC is a solid, low particle size, amorphous organotin catalyst that is used mainly in esterification and polycondensation reactions. REAXIS® C248LC is well suited for the transesterification of vinyl acetate or acrylic acid copolymers as well ...view more REAXIS® C248LC is a solid, low particle size, amorphous organotin catalyst that is used mainly in esterification and polycondensation reactions. REAXIS® C248LC is well suited for the transesterification of vinyl acetate or acrylic acid copolymers as well as the production of polycarbonates. In addition it can also be used for the electrodeposition coatings and the synthesis of alkyd and polyester resins. REAXIS® C248LC is typically used at concentrations ranging from 0.01 - 0.5 wt% at 90 - 260°C. view less | |
| REAXIS® C250 | Reaxis Inc. | REAXIS® C250 is a solid, amorphous organotin catalyst that is typically utilized in esterification and polycondensation reactions. REAXIS® C250 is well suited for the production of saturated and unsaturated polyester synthesis and alkyd resins. It can als...view more REAXIS® C250 is a solid, amorphous organotin catalyst that is typically utilized in esterification and polycondensation reactions. REAXIS® C250 is well suited for the production of saturated and unsaturated polyester synthesis and alkyd resins. It can also improve the curing time of silicone resins and salines. REAXIS® C250 is typically used at concentrations ranging from 0.01 - 0.5 wt% at 90 - 280°C. view less | |
| REAXIS® C256 | Reaxis Inc. | REAXIS® C256 is a solid white powder, which is an organotin based catalyst that is typically used in esterification and polycondensation reactions. Made of Monobutyltin Hydroxide Oxide it is typically used at concentrations ranging from 0.01 - 0.5 wt% at ...view more REAXIS® C256 is a solid white powder, which is an organotin based catalyst that is typically used in esterification and polycondensation reactions. Made of Monobutyltin Hydroxide Oxide it is typically used at concentrations ranging from 0.01 - 0.5 wt% at 90 - 280°C. REAXIS® C256 is well suited for use in saturated and unsaturated polyester synthesis, alkyd resin production and transesterification reactions. view less | |
| REAXIS® C311X | Reaxis Inc. | REAXIS® C311X is a light yellow liquid catalyst in xylene. The main use is for the catalysis of silicone and urethane CASE products. | |
| REAXIS® C317 | Reaxis Inc. | REAXIS® C317 is a yellowish liquid catalyst that can be used in various applications. The catalyst is manufactured from synthetic raw materials and provides excellent temperature and color stability. REAXIS® C317 is well suited for use in esterification a...view more REAXIS® C317 is a yellowish liquid catalyst that can be used in various applications. The catalyst is manufactured from synthetic raw materials and provides excellent temperature and color stability. REAXIS® C317 is well suited for use in esterification and transesterification reactions, isocyanate/alcohol reactions for urethane coatings as well as silicone condensation reactions, especially with RTV silicones. view less | |
| REAXIS® C318 | Reaxis Inc. | REAXIS® C318 is a yellowish liquid catalyst used in the condensation cure of silicones and the synthesis and curing of polyurethanes. It is considered a slower catalyst compared to its butyl and methyl-based analogues. REAXIS® C318 is well suited for use ...view more REAXIS® C318 is a yellowish liquid catalyst used in the condensation cure of silicones and the synthesis and curing of polyurethanes. It is considered a slower catalyst compared to its butyl and methyl-based analogues. REAXIS® C318 is well suited for use as a catalyst in the production of RTV silicone adhesives and sealants, polyurethane elastomers, polyurethane adhesive and sealants as well as polyurethane coatings. view less | |
| REAXIS® C319 | Reaxis Inc. | REAXIS® C319 is a yellowish liquid catalyst that is used in the synthesis and curing of polyurethanes. REAXIS® C319 is well suited for more of a delayed cure time when compared to organotin carboxylates. | |
| REAXIS® C321 | Reaxis Inc. | REAXIS® C321is a yellowish liquid catalyst used in the synthesis and curing of polyurethanes. REAXIS® C321 is well suited for more of a delayed cure time when compared to organotin carboxylates. | |
| REAXIS® C322 | Reaxis Inc. | REAXIS® C322 is a yellowish liquid catalyst used in the synthesis and curing of polyurethanes. REAXIS® C322 is well suited for a more delayed cure time when compared to organotin carboxylates. | |
| REAXIS® C325 | Reaxis Inc. | REAXIS® C325 is a yellowish liquid catalyst of high activity used in the condensation cure of silicones and the production of polyurethanes. REAXIS® C325 is well suited for use as a catalyst in the manufacturing of RTV silicone adhesives and sealants, pol...view more REAXIS® C325 is a yellowish liquid catalyst of high activity used in the condensation cure of silicones and the production of polyurethanes. REAXIS® C325 is well suited for use as a catalyst in the manufacturing of RTV silicone adhesives and sealants, polyurethane elastomers, adhesive and sealants and coatings. view less | |
| REAXIS® C333E50 | Reaxis Inc. | REAXIS® C333E50 is a clear liquid catalyst that is well suited for curing a wide selection of solventborne polyurethane-based formulations. It exhibits a high selectivity for the NCO/OH reaction. And is supplied as a 50% active catalyst in ethylene glycol...view more REAXIS® C333E50 is a clear liquid catalyst that is well suited for curing a wide selection of solventborne polyurethane-based formulations. It exhibits a high selectivity for the NCO/OH reaction. And is supplied as a 50% active catalyst in ethylene glycol. REAXIS® C333E50 can be supplied in other diluents. view less | |
| REAXIS® C333W50 | Reaxis Inc. | REAXIS® C333W50 is a hydrolytically stable catalyst used for curing waterborne polyurethane systems. It exhibits a high selectivity for the NCO/OH reaction which leads to improved physical properties and over all development. REAXIS® C333W50 is supplied a...view more REAXIS® C333W50 is a hydrolytically stable catalyst used for curing waterborne polyurethane systems. It exhibits a high selectivity for the NCO/OH reaction which leads to improved physical properties and over all development. REAXIS® C333W50 is supplied as a 50% active catalyst in water and can be supplied in other diluents. view less | |
| REAXIS® C416 | Reaxis Inc. | REAXIS® C416 is a yellowish liquid catalyst used in the synthesis and curing of polyurethanes. REAXIS® C416 provides for more of a delayed action cure and enhanced hydroltic stability compared to organotin carboxylates. | |
| REAXIS® C417 | Reaxis Inc. | REAXIS® C417 is a yellowish liquid catalyst based on dioctyltin oxide. REAXIS® C417 is used in the curing of silicone and saline systems and is well suited for the curing of alkoxy-based RTV silicones, oxime-based RTV silicones and MS Polymers. | |
| REAXIS® C418 | Reaxis Inc. | REAXIS® C418 is a liquid catalyst used in the synthesis and curing of polyurethanes. REAXIS® C418 is well suited for a delayed cure reaction and enhanced hydrological stability when compared to organotin carboxylates. | |
| REAXIS® C616 | Reaxis Inc. | REAXIS® C616 is a yellowish liquid made of an effective zinc catalyst that is well suited for use in polyurethane and polyester resins. REAXIS® C616 exhibits lower reactivity when compared to organotins and can provide pot life extension in 2 component sy...view more REAXIS® C616 is a yellowish liquid made of an effective zinc catalyst that is well suited for use in polyurethane and polyester resins. REAXIS® C616 exhibits lower reactivity when compared to organotins and can provide pot life extension in 2 component systems. As typical with most zincs, REAXIS® C616 can catalyze the hydroxyl/water in polyurethane reactions. view less | |
| REAXIS® C620 | Reaxis Inc. | REAXIS® C620 is a yellowish liquid made of Zinc Octoate which can be used as a catalyst for polyurethane resin synthesis and crosslinking. In polyurethanes, it will promote lower reactivity when compared to organotins and provides pot life extension in 2-...view more REAXIS® C620 is a yellowish liquid made of Zinc Octoate which can be used as a catalyst for polyurethane resin synthesis and crosslinking. In polyurethanes, it will promote lower reactivity when compared to organotins and provides pot life extension in 2-component systems. REAXIS® C620 can also be used as a curing catalyst for unsaturated polyesters. In addition, it can also be used to catalyze a variety of isocyanates for crosslinking reactions. view less | |
| REAXIS® C623 | Reaxis Inc. | REAXIS® C623 is an off white solid zinc compound that is well suited for use as a catalyst in the condensation of silicone resins and the crosslinking of powder resins | |
| REAXIS® C634 | Reaxis Inc. | REAXIS® C634 is a non-corrosive, white solid zinc based catalyst, used for esterification reactions. This product is typically used at concentrations ranging from 0.01 - 0.5 wt% at 160 - 260°C. Reaxis® C634 is well suited for complete conversions with sho...view more REAXIS® C634 is a non-corrosive, white solid zinc based catalyst, used for esterification reactions. This product is typically used at concentrations ranging from 0.01 - 0.5 wt% at 160 - 260°C. Reaxis® C634 is well suited for complete conversions with short reaction times due to high catalytic activity as well as minimal secondary reactions and colored by-products compared to acid catalysts. view less | |
| REAXIS® C716 | Reaxis Inc. | REAXIS® C716 is an effective liquid catalyst for polyurethane. Made of a bismuth-based catalyst, it can provide a good balance in potlife and cure. REAXIS® C716 is good a non-tin alternative to DBTL for various polyurethane coatings, adhesive/sealants and...view more REAXIS® C716 is an effective liquid catalyst for polyurethane. Made of a bismuth-based catalyst, it can provide a good balance in potlife and cure. REAXIS® C716 is good a non-tin alternative to DBTL for various polyurethane coatings, adhesive/sealants and elastomer systems. view less | |
| REAXIS® C717 | Reaxis Inc. | REAXIS® C717 is a mixed metal liquid catalyst used for the production of polyurethane systems, including 2Ks, prepolymers, and elastomers. REAXIS® C717 is characterized by a high selectivity for the NCO/OH reaction, especially in 2K formulations. | |
| REAXIS® C719 | Reaxis Inc. | REAXIS® C719 is a colorless to light yellow aqueous solution of Bi(CH3SO3)3 produced by a proprietary process from high purity raw materials. It is primarily used to replenish bismuth in bismuth and bismuth alloy plating baths. It is also used in elecrode...view more REAXIS® C719 is a colorless to light yellow aqueous solution of Bi(CH3SO3)3 produced by a proprietary process from high purity raw materials. It is primarily used to replenish bismuth in bismuth and bismuth alloy plating baths. It is also used in elecrodepostion coating formulations. view less | |
| REAXIS® C723 | Reaxis Inc. | REAXIS® C723 is a slightly yellow liquid bismuth-based catalyst used for the catalysis of polyurethane systems. | |
| REAXIS® C726 | Reaxis Inc. | REAXIS® C726 is a slightly yellow liquid bismuth-based catalyst used for the catalysis of polyurethane systems. | |
| REAXIS® E140 | Reaxis Inc. | REAXIS® E140 is a fast dissolving alkaline tin salt solution manufactured by a proprietary direct process that yields consistently high purity product. It is used as the tin replenisher in alkaline tin and tin alloy plating baths. REAXIS® E140 also finds ...view more REAXIS® E140 is a fast dissolving alkaline tin salt solution manufactured by a proprietary direct process that yields consistently high purity product. It is used as the tin replenisher in alkaline tin and tin alloy plating baths. REAXIS® E140 also finds use in esterfications. view less | |
| REAXIS® E140P | Reaxis Inc. | REAXIS® E140P is an exceptionally pure grade of potassium stannate that is approved for use in applications where the tightest specifications must be met, such as in formulations for Hydrogen Peroxide stabilization. It is manufactured by a proprietary dir...view more REAXIS® E140P is an exceptionally pure grade of potassium stannate that is approved for use in applications where the tightest specifications must be met, such as in formulations for Hydrogen Peroxide stabilization. It is manufactured by a proprietary direct process which yields the purest product available anywhere. REAXIS® E140P also finds use in esterfications. view less | |
| REAXIS® E144P | Reaxis Inc. | REAXIS® E144P is a fast dissolving, alkaline tin salt manufactured by a proprietary direct process that yields consistently high purity crystal. Made of Sodium Stannate, it is used as an ingredient in Hydrogen Peroxide stabilization / stabilizer concentra...view more REAXIS® E144P is a fast dissolving, alkaline tin salt manufactured by a proprietary direct process that yields consistently high purity crystal. Made of Sodium Stannate, it is used as an ingredient in Hydrogen Peroxide stabilization / stabilizer concentrates and other applications where highest purity is required. view less | |
| REAXIS® E155 | Reaxis Inc. | REAXIS® E155 is a fast dissolving high quality tin salt that is manufactured by a proprietary direct process to insure consistently very low impurity levels. Made of a Stannous Sulfate, it is used as the coloring agent in electrolytic coloring baths for h...view more REAXIS® E155 is a fast dissolving high quality tin salt that is manufactured by a proprietary direct process to insure consistently very low impurity levels. Made of a Stannous Sulfate, it is used as the coloring agent in electrolytic coloring baths for hard anodized aluminum extrusions and as the tin source in acid tin electroplating baths. view less | |
| REAXIS® E810 | Reaxis Inc. | REAXIS® E810 is a high purity low melting point solid material which is dark blue green in color, that is well suited for use in anti-fouling of certain varnishes or paints. REAXIS® E810 can also be blended for use in the electronics industries. |
