| (1) NATCATalyst 140 | NiCHEM CORP. | NATCATalyst 140 is a general purpose strong acid catalyst for use in various solvent soluble and water-based thermosetting resin systems. It is a clear liquid that is 40% p-TSA, and is in isopropanol. | |
| (2) NATCATalyst 170 | NiCHEM CORP. | NATCATalyst 170 is designed to promote the reaction between resin hydroxyls and fully alkylated amino resins and also epoxy and amino resin systems. It promotes the reaction of lower acid value resins at lower temperatures and higher solids. It is an ambe...view more NATCATalyst 170 is designed to promote the reaction between resin hydroxyls and fully alkylated amino resins and also epoxy and amino resin systems. It promotes the reaction of lower acid value resins at lower temperatures and higher solids. It is an amber liquid that is 70% dodecylbenzene sulfonic acid in isopropanol. view less | |
| (3) FASTCATaylst B25 | NiCHEM CORP. | FASTCATaylst B25 is designed to promote the reaction between resin hydroxyls, epoxy, amino resin systems. It promotes the reaction of lower acid value resins at lower temperatures and higher solids. It is a clear to amber liquid in isopropanol that is 25%...view more FASTCATaylst B25 is designed to promote the reaction between resin hydroxyls, epoxy, amino resin systems. It promotes the reaction of lower acid value resins at lower temperatures and higher solids. It is a clear to amber liquid in isopropanol that is 25% p-TSA. view less | |
| (4) NATCATalyst 140B | NiCHEM CORP. | NATCATalyst 140B is a general purpose strong acid catalyst for use in various solvent soluble and water-based thermosetting resin systems. It is a clear liquid that is 40% p-TSA that is in n-Butanol. | |
| (5) NATCATalyst 229B | NiCHEM CORP. | NATCATalyst 229B is a general purpose strong acidic catalyst for the usein various solvent soluble thermosetting resin systems. It improves the curing process and does not cause wrinkling. It is a clear liquid that is 50% mixed sulfonic acids in n-Butano...view more NATCATalyst 229B is a general purpose strong acidic catalyst for the usein various solvent soluble thermosetting resin systems. It improves the curing process and does not cause wrinkling. It is a clear liquid that is 50% mixed sulfonic acids in n-Butanol. view less | |
| (6) NATCATalyst 229W | NiCHEM CORP. | NATCATalyst 229W is a general purpose strong acid catalyst for use in various waterbase thermosetting resin systems. It promotes the reaction of lower acid value resins at lower temperatures and higher solids. This product improves the curing process and...view more NATCATalyst 229W is a general purpose strong acid catalyst for use in various waterbase thermosetting resin systems. It promotes the reaction of lower acid value resins at lower temperatures and higher solids. This product improves the curing process and does not cause wrinkling. It is a clear liquid that is 50% mixed sulfonic acids, and is in water. view less | |
| CALGON® 322 | ICL Phosphate Specialty | CALGON® 322 is a dispersing agent for emulsion paints, plasters and adhesives. It is a slightly acidic sodium polyphosphate of long chain length. This white, hygroscopic powder improves the storage stability when applied in combination with Polyacrylates ...view more CALGON® 322 is a dispersing agent for emulsion paints, plasters and adhesives. It is a slightly acidic sodium polyphosphate of long chain length. This white, hygroscopic powder improves the storage stability when applied in combination with Polyacrylates like LOPON® 890. Due to its dispersing action, optimal particle size ist rapidly achieved. This is beneficial in the production process of manufacturing paints. This product is best suitable as a dispersing agent for all aqueous building paints, especially emulsion paints consisting of usual resins. CALGON® 322 slows down sedimentation, stabilizes water hardness and offers a good binding capacity with regard to calcium and heavy metal ions. It also prevents coagulation and brown shadings of emulsion paints and deflocculates pigments and fillers in aqueous suspensions. Thereby, high solid contents of emulsion paints with low viscosity can be achived. view less | Request Sample |
| CALGON® 322 New | ICL Phosphate Specialty | CALGON® 322 New is a dispersing agent for emulsion paints, plasters, and adhesives. It is a slightly acidic sodium polyphosphate of long chain length. This product improves the storage stability when applied in combination with polyacrylates like LOPON® 8...view more CALGON® 322 New is a dispersing agent for emulsion paints, plasters, and adhesives. It is a slightly acidic sodium polyphosphate of long chain length. This product improves the storage stability when applied in combination with polyacrylates like LOPON® 890. Due to its dispersing action, optimal particle size is rapidly achieved and it is best suited as a dispersing agent for waterborne paints, especially emulsion paints. It also slows down sedimentation reduces water hardness and offers a good binding capacity with regard to calcium- and heavy metal ions. This product deflocculates pigments and fillers in aqueous suspensions. Thereby, high solid contents of emulsion paints with low viscosity can be achieved. view less | Request Sample |
| CALGON® N | ICL Phosphate Specialty | CALGON® N is a dispersing agent for emulsion paints, plasters and adhesives. This white powder is a slightly alkaline sodium polyphosphate of medium chain length. It improves the storage stability when applied in combination with polyacrylates like LOPON®...view more CALGON® N is a dispersing agent for emulsion paints, plasters and adhesives. This white powder is a slightly alkaline sodium polyphosphate of medium chain length. It improves the storage stability when applied in combination with polyacrylates like LOPON® 890, and due to its high dispersing effectivity, optimal particle size is rapidly achieved. This product is suitable as a dispersing agent for waterborne paints, slows down sedimentation, reduces water hardness and offers a good binding capacity with regard to calcium and heavy metal ions. It deflocculates pigments and fillers in aqueous suspensions. Thereby, high solid contents of emulsion paints with low viscosity can be achieved. view less | Request Sample |
| CALGON® N New | ICL Phosphate Specialty | CALGON® N New is a dispersing agent for emulsion paints, plasters and adhesives. It is a slightly alkaline sodium polyphosphate of medium chain length. CALGON® N new is easily soluble since the product is agglomerated, it improves the storage stability wh...view more CALGON® N New is a dispersing agent for emulsion paints, plasters and adhesives. It is a slightly alkaline sodium polyphosphate of medium chain length. CALGON® N new is easily soluble since the product is agglomerated, it improves the storage stability when applied in combination with polyacrylates like LOPON® 800, and due to its high dispersing effectivity, optimal particle size of the pigment slurry is rapidly achieved. This product is suitable as a dispersing agent for emulsion paints and plasters, slows down sedimentation, reduces water hardness and offers a good binding capacity with regard to calcium and heavy metal ions. It deflocculates pigments and fillers in aqueous suspensions to achieve high solid contents of emulsion paints with low viscosity. view less | Request Sample |
| CALGON® TK | ICL Phosphate Specialty | CALGON® TK is a dispersing agent for emulsion paints, plasters and adhesives. It is a white, hygroscopic granulate. This product offers the following advantages: low and rapid end viscosity of dispersing process, is best suitable as dispersing agent for a...view more CALGON® TK is a dispersing agent for emulsion paints, plasters and adhesives. It is a white, hygroscopic granulate. This product offers the following advantages: low and rapid end viscosity of dispersing process, is best suitable as dispersing agent for all aqueous building paints and plasters, caused by the excellent storage stability CALGON® TK is best suitable for the application within silicate paints. It prevents white shadings and carbonatisation of external wall paints, and it can be applied in combination with polyacrylates like LOPON® 890. view less | Request Sample |
| DOWSIL™ 100F Additive | Dow Performance Silicones | DOWSIL™ 100F Additive is a foam control agent in solvent-based and radiation curable coatings. It gives efficient foam control at very low silicone addition levels, even in high solids coatings formulations. It shows good compatibility in solventborne and...view more DOWSIL™ 100F Additive is a foam control agent in solvent-based and radiation curable coatings. It gives efficient foam control at very low silicone addition levels, even in high solids coatings formulations. It shows good compatibility in solventborne and radiation curable coatings and has a low tendency to cause craters or impact gloss or clarity of the coating. Due to the low addition levels required, it does not cause issues with recoatability. view less | |
| DOWSIL™ 102F Additive | Dow Performance Silicones | DOWSIL™ 102F Additive is a highly effective foam control agent for solvent based coating systems, which offers optimal defoaming and antifoaming at very low addition levels. It shows good compatibility in solvent based coatings and has low tendency to cau...view more DOWSIL™ 102F Additive is a highly effective foam control agent for solvent based coating systems, which offers optimal defoaming and antifoaming at very low addition levels. It shows good compatibility in solvent based coatings and has low tendency to cause craters or impact gloss or clarity of the coatings. view less | |
| DOWSIL™ 107F Additive | Dow Performance Silicones | DOWSIL™ 107F Additive is a low-cyclic silicone foam control agent with high effectiveness in waterborne acrylic clear wood coating varnishes, and acrylic, styrene acrylic and VAE emulsion paint for architectural wall coatings. It reduces defects and micro...view more DOWSIL™ 107F Additive is a low-cyclic silicone foam control agent with high effectiveness in waterborne acrylic clear wood coating varnishes, and acrylic, styrene acrylic and VAE emulsion paint for architectural wall coatings. It reduces defects and microbubbles in the coating film, thereby enhancing the durability of the substrate protection provided by the coating. It also has an excellent environmental and health profile which makes it suitable for the formulation of EU Ecolabel compliant indoor and outdoor paints and varnishes following the criteria set out in decision 2014/312/EU. view less | |
| DOWSIL™ 108F Additive | Dow Performance Silicones | DOWSIL™ 108F Additive is a versatile antifoam active on the reduction of foam generated during the manufacture and application of water based paints, coatings and inks. It works in major types of water based resins like acrylics, vinyl acetate/ethylene (V...view more DOWSIL™ 108F Additive is a versatile antifoam active on the reduction of foam generated during the manufacture and application of water based paints, coatings and inks. It works in major types of water based resins like acrylics, vinyl acetate/ethylene (VAE dispersions), polyurethane dispersions, and alkyd emulsions. This antifoam additive is particularly recommended for premium low PVC coatings, to provide a good density control of the coating formulation while maintaining a good appearance of the final surface. view less | |
| DOWSIL™ 11 Additive | Dow Performance Silicones | DOWSIL™ 11 Additive is a silicone additive provides slip, mar resistance and leveling in solvent-based applications. It can also correct glossing, pinholing and fisheyes, and reduced foaming during production. This product is suitable for inks, coatings, ...view more DOWSIL™ 11 Additive is a silicone additive provides slip, mar resistance and leveling in solvent-based applications. It can also correct glossing, pinholing and fisheyes, and reduced foaming during production. This product is suitable for inks, coatings, and paints. view less | |
| DOWSIL™ 14 Additive | Dow Performance Silicones | DOWSIL™ 14 Additive is a silicone additive which provides slip and leveling in water- and solvent-based applications. It also offers mar resistance in water-based systems. This product is composed of a reactive silicone glycol surfactant with carbinol fun...view more DOWSIL™ 14 Additive is a silicone additive which provides slip and leveling in water- and solvent-based applications. It also offers mar resistance in water-based systems. This product is composed of a reactive silicone glycol surfactant with carbinol functionality, supplied as 10% active concentration. view less | |
| DOWSIL™ 163 Additive | Dow Performance Silicones | DOWSIL™ 163 Additive is a foam control additive for solvent-based and UV coatings and solvent-based and water-based inks. It may be used in ink and coating formulations that are acceptable for food contact. This product is a low-viscosity, 100% active sil...view more DOWSIL™ 163 Additive is a foam control additive for solvent-based and UV coatings and solvent-based and water-based inks. It may be used in ink and coating formulations that are acceptable for food contact. This product is a low-viscosity, 100% active silicone antifoam compound containing no solvents. view less | |
| DOWSIL™ 18 Additive | Dow Performance Silicones | DOWSIL™ 18 Additive is a non-reactive high-molecular-weight polydimethyl siloxane dispersion containing no volatile solvent. It provides slip and mar resistance for solvent-based coatings as well as a mar resistance for water-based coatings and inks. | |
| DOWSIL™ 204SL Additive | Dow Performance Silicones | DOWSIL™ 204SL Additive is an easy-to-use, high performance silicone polyether additive that gives excellent, multiple properties in radiation curable coatings. It can also be used for solventborne coating formulations. This 100% silicone polyether copolym...view more DOWSIL™ 204SL Additive is an easy-to-use, high performance silicone polyether additive that gives excellent, multiple properties in radiation curable coatings. It can also be used for solventborne coating formulations. This 100% silicone polyether copolymer allows for low VOC, low addition levels and formulation flexibility. view less | |
| DOWSIL™ 205SL Additive | Dow Performance Silicones | DOWSIL™ 205SL Additive is an easy-to-use, high performance silicone polyether additive that gives excellent hand feel in multiple coating formulations at low addition levels. It also functions as an antifoam, bringing both enabling and problem solving ben...view more DOWSIL™ 205SL Additive is an easy-to-use, high performance silicone polyether additive that gives excellent hand feel in multiple coating formulations at low addition levels. It also functions as an antifoam, bringing both enabling and problem solving benefits to the formulator and reducing the amount of additives required in the formulation. view less | |
| DOWSIL™ 210S Additive | Dow Performance Silicones | DOWSIL™ 210S Additive is an ultra-high molecular weight silicone dispersion in water with improved compatibility and low tendency to cause craters. It can be used to customize slip and hand-feel for coating surface, while improving mar resistance and enha...view more DOWSIL™ 210S Additive is an ultra-high molecular weight silicone dispersion in water with improved compatibility and low tendency to cause craters. It can be used to customize slip and hand-feel for coating surface, while improving mar resistance and enhancing anti-blocking. view less | |
| DOWSIL™ 211S Additive | Dow Performance Silicones | DOWSIL™ 211S Additive is a novel low-cyclic, ultra-high molecular weight silicone delivered in a waterborne system that enhances mar resistance, slip and block resistance performance thereby helping to enable more durable, longer-lasting wood coatings. It...view more DOWSIL™ 211S Additive is a novel low-cyclic, ultra-high molecular weight silicone delivered in a waterborne system that enhances mar resistance, slip and block resistance performance thereby helping to enable more durable, longer-lasting wood coatings. It also offers high compatibility, solvent dilution, and performs at very low dosage which are essential features for coating formulators. view less | |
| DOWSIL™ 23 N Additive | Dow Performance Silicones | DOWSIL™ 23 N Additive is a silicone additive for solvent and aqueous coatings. It is a white elastomeric silicone powder that contains epoxy groups. This product is resistant to scratching and general marking, and provides a matte finish. | |
| DOWSIL™ 2405 Resin | Dow Performance Silicones | DOWSIL™ 2405 Resin is a solvent-less methoxy functional, liquid siloxane. It can be used as a sole binder or in combination with other siloxanes such as DOWSIL™ US-CF-2403 Resin, in both clear and pigmented formulations. This product has limited compatibi...view more DOWSIL™ 2405 Resin is a solvent-less methoxy functional, liquid siloxane. It can be used as a sole binder or in combination with other siloxanes such as DOWSIL™ US-CF-2403 Resin, in both clear and pigmented formulations. This product has limited compatibility with organic binders. It is compatible with or soluble in classical solvents (butyl acetate or xylene). view less | |
| DOWSIL™ 27 Additive | Dow Performance Silicones | DOWSIL™ 27 Additive is a nonreactive silicone glycol surfactant with both silicone and organic characteristics. It is supplied as a 100% active fluid. This product may be incorporated into solvent, aqueous, solventless and energy curable systems. | |
| DOWSIL™ 29 Additive | Dow Performance Silicones | DOWSIL™ 29 Additive is a carbinol functional silicone glycol surfactant used to provide leveling and wetting, and improve gloss. It is effective at low concentrations. The amount required depends on the type of formulation, the solvent it contains, resin ...view more DOWSIL™ 29 Additive is a carbinol functional silicone glycol surfactant used to provide leveling and wetting, and improve gloss. It is effective at low concentrations. The amount required depends on the type of formulation, the solvent it contains, resin system and total system solids. view less | |
| DOWSIL™ 3 Additive | Dow Performance Silicones | DOWSIL™ 3 Additive is a silanol functional silicone resin for dispersion of inorganic pigments to prevent flooding and floating. It has been tested successfully in solvent-based wood coatings and solvent-based industrial coatings. | |
| DOWSIL™ 3037 Intermediate | Dow Performance Silicones | DOWSIL™ 3037 Intermediate is a silicone resin intermediate. It is used reacted with organic resins to improve weatherability, or other silicone resins to reduce VOC and improve flexibility. | |
| DOWSIL™ 3055 Resin | Dow Performance Silicones | DOWSIL™ 3055 Resin is an amine functional, solventless liquid silicone resin. It chemically reacts with organic resins that contain epoxide, carboxy, isocyanate or acrylate groups to form silicone-organic copolymers. This product is used as a crosslinker ...view more DOWSIL™ 3055 Resin is an amine functional, solventless liquid silicone resin. It chemically reacts with organic resins that contain epoxide, carboxy, isocyanate or acrylate groups to form silicone-organic copolymers. This product is used as a crosslinker to improve the physical properties and long-term performance of paints and coatings. view less | |
| DOWSIL™ 3074 Intermediate | Dow Performance Silicones | DOWSIL™ 3074 Intermediate is a silicone resin intermediate used in combination with organic resins via cold-blends or prereaction. It improves weatherability and heat resistance, or with phenyl-containing silicone resin as a reactive diluent for low VOC h...view more DOWSIL™ 3074 Intermediate is a silicone resin intermediate used in combination with organic resins via cold-blends or prereaction. It improves weatherability and heat resistance, or with phenyl-containing silicone resin as a reactive diluent for low VOC high temperature coatings. view less | |
| DOWSIL™ 33 Additive | Dow Performance Silicones | DOWSIL™ 33 Additive is a suspension of cured silicone elastomer particles suspended in water. Silicone particles are soft, flexible three-dimensional elastomers with epoxy functionality. This product imparts smooth finish, provides matte effect, increases...view more DOWSIL™ 33 Additive is a suspension of cured silicone elastomer particles suspended in water. Silicone particles are soft, flexible three-dimensional elastomers with epoxy functionality. This product imparts smooth finish, provides matte effect, increases mar resistance, contains epoxy functionality, and does not impact recoatability. view less | |
| DOWSIL™ 401LS Additive | Dow Performance Silicones | DOWSIL™ 401LS Additive is an easy-to-use, high performance silicone polyether additive that gives good flow, leveling and slip in solventborne and waterborne formulations at low addition levels. This product is suitable for pigmented and clear coat formul...view more DOWSIL™ 401LS Additive is an easy-to-use, high performance silicone polyether additive that gives good flow, leveling and slip in solventborne and waterborne formulations at low addition levels. This product is suitable for pigmented and clear coat formulations, wood coatings, plastic coatings, inks and overprint varnishes, and is compliant with legislation for food packaging inks. view less | |
| DOWSIL™ 402LS Additive | Dow Performance Silicones | DOWSIL™ 402LS Additive is a silicone additive which reduces the coefficient of friction of wood coatings, and offers blocking resistance, while improving the flow and levelling properties for the formulation. It performs at very low levels and exhibit a f...view more DOWSIL™ 402LS Additive is a silicone additive which reduces the coefficient of friction of wood coatings, and offers blocking resistance, while improving the flow and levelling properties for the formulation. It performs at very low levels and exhibit a favorable environmental and health profile: it contains no solvent, no benzene, toluene, xylene, and meets European food contact regulations. view less | |
| DOWSIL™ 402LS Additive | Dow Performance Silicones | DOWSIL™ 402LS Additive is an easy-to-use, high performance silicone polyether additive that gives good flow, leveling and slip in waterborne and radiation curable formulations at low addition levels. This product is recommended for pigmented and clear coa...view more DOWSIL™ 402LS Additive is an easy-to-use, high performance silicone polyether additive that gives good flow, leveling and slip in waterborne and radiation curable formulations at low addition levels. This product is recommended for pigmented and clear coat formulations, wood coatings, industrial metal coatings, inks and overprint varnishes, and is compliant with legislation for food packaging inks. view less | |
| DOWSIL™ 500W Additive | Dow Performance Silicones | DOWSIL™ 500W Additive is a low molecular weight organofunctional silicone that gives excellent wetting properties in both waterborne and radiation curable coating formulations. This 100% active, low VOC additive offers formulation flexibility and effectiv...view more DOWSIL™ 500W Additive is a low molecular weight organofunctional silicone that gives excellent wetting properties in both waterborne and radiation curable coating formulations. This 100% active, low VOC additive offers formulation flexibility and effective performance at low addition levels. The excellent surface mobility of this additive can be demonstrated by the low surface tensions of aqueous solutions. view less | |
| DOWSIL™ 501W Additive | Dow Performance Silicones | DOWSIL™ 501W Additive is a low molecular weight organofunctional silicone that gives excellent wetting properties in both waterborne and radiation curable coating formulations. This 100% active, low VOC additive offers formulation flexibility and effectiv...view more DOWSIL™ 501W Additive is a low molecular weight organofunctional silicone that gives excellent wetting properties in both waterborne and radiation curable coating formulations. This 100% active, low VOC additive offers formulation flexibility and effective performance at low addition levels. The excellent surface mobility of this additive can be demonstrated by the low surface tensions of aqueous solutions. view less | |
| DOWSIL™ 502W Additive | Dow Performance Silicones | DOWSIL™ 502W Additive is a low molecular weight organofunctional silicone that gives excellent wetting properties in both waterborne and radiation curable coating formulations. This 100% active, low VOC additive offers formulation flexibility and effectiv...view more DOWSIL™ 502W Additive is a low molecular weight organofunctional silicone that gives excellent wetting properties in both waterborne and radiation curable coating formulations. This 100% active, low VOC additive offers formulation flexibility and effective performance at low addition levels. The excellent surface mobility of this additive can be demonstrated by the low surface tensions of aqueous solutions. view less | |
| DOWSIL™ 51 Additive | Dow Performance Silicones | DOWSIL™ 51 Additive is an ultra-high-molecular-weight polydimethylsiloxane dispersion in paste form, supplied at 80% solids. It reduces coefficient of friction, provides antiblocking and improves mar resistance. | |
| DOWSIL™ 52 Additive | Dow Performance Silicones | DOWSIL™ 52 Additive is an ultra-high molecular weight silicone dispersion in water, supplied at 65% solids. It reduces static and dynamic coefficient of friction and improves mar resistance in coatings and inks applications. | |
| DOWSIL™ 54 Additive | Dow Performance Silicones | DOWSIL™ 54 Additive is a 100% active silicone glycol copolymer. It provides slip, mar resistance and leveling for ink applications. This produces has been successful in solvent-based inkjet inks, solvent-based screen printing inks, and water-based screen ...view more DOWSIL™ 54 Additive is a 100% active silicone glycol copolymer. It provides slip, mar resistance and leveling for ink applications. This produces has been successful in solvent-based inkjet inks, solvent-based screen printing inks, and water-based screen printing inks. view less | |
| DOWSIL™ 55 Additive | Dow Performance Silicones | DOWSIL™ 55 Additive is a reactive silicone glycol surfactant with carbinol functionality, supplied at 10% active concentration. It imparts mar and abrasion resistance by reducing surface friction, improves flow-out, wetting and gloss, reduces cratering, a...view more DOWSIL™ 55 Additive is a reactive silicone glycol surfactant with carbinol functionality, supplied at 10% active concentration. It imparts mar and abrasion resistance by reducing surface friction, improves flow-out, wetting and gloss, reduces cratering, and prevents pinholing, orange peel, and cissing. view less | |
| DOWSIL™ 56 Additive | Dow Performance Silicones | DOWSIL™ 56 Additive is a 100% active alkylmethyl siloxane additive. It is intended for eliminating microfoam, improving leveling and improving mar resistance. This product has been used in solvent-based wood coatings, solventless paints, water-based wood ...view more DOWSIL™ 56 Additive is a 100% active alkylmethyl siloxane additive. It is intended for eliminating microfoam, improving leveling and improving mar resistance. This product has been used in solvent-based wood coatings, solventless paints, water-based wood coatings, and solvent-based industrial coatings. view less | |
| DOWSIL™ 57 Additive | Dow Performance Silicones | DOWSIL™ 57 Additive is a nonreactive silicone glycol copolymer surfactant supplied at 100% active concentration. It provides slip, gloss enhancement, pigment treatment and leveling for ink and coatings applications. This product is compatible with acrylic...view more DOWSIL™ 57 Additive is a nonreactive silicone glycol copolymer surfactant supplied at 100% active concentration. It provides slip, gloss enhancement, pigment treatment and leveling for ink and coatings applications. This product is compatible with acrylic, alkyd, amide, epoxy, nitrocellulose, phenolic, polyester, polyurethane and vinyl systems. view less | |
| DOWSIL™ 61 Paint Additive | Dow Performance Silicones | DOWSIL™ 61 Paint Additive is a silicone hammertone additive. It is intended Intended primarily for solvent based paints, but can be incorporated into some water-borne systems. Addition levels are critical and have to be carefully determined for each produ...view more DOWSIL™ 61 Paint Additive is a silicone hammertone additive. It is intended Intended primarily for solvent based paints, but can be incorporated into some water-borne systems. Addition levels are critical and have to be carefully determined for each product; care must also be taken to avoid contamination of other non-hammertone view less | |
| DOWSIL™ 62 Additive | Dow Performance Silicones | DOWSIL™ 62 Additive is a water-based silicone antifoam, effective at low concentrations. It provides highly effective and long-lasting foam control. This product is readily dispersible in water-based inks and coatings. It offers good compatibility, with l...view more DOWSIL™ 62 Additive is a water-based silicone antifoam, effective at low concentrations. It provides highly effective and long-lasting foam control. This product is readily dispersible in water-based inks and coatings. It offers good compatibility, with low tendency to cause defects or affect coating gloss. view less | |
| DOWSIL™ 67 Additive | Dow Performance Silicones | DOWSIL™ 67 Additive is a low molecular weight organofunctional silicone that gives excellent wetting properties in both waterborne and radiation curable coating formulations. This 100% active, low VOC additive offers formulation flexibility and effective ...view more DOWSIL™ 67 Additive is a low molecular weight organofunctional silicone that gives excellent wetting properties in both waterborne and radiation curable coating formulations. This 100% active, low VOC additive offers formulation flexibility and effective performance at low addition levels. The excellent surface mobility of this additive can be demonstrated by the low surface tensions of aqueous solutions. view less | |
| DOWSIL™ 68 Additive | Dow Performance Silicones | DOWSIL™ 68 Additive is an alkyl phenol ethoxylate-free silicone foam control agent. It is used for reducing foam and maintaining foam control during the production, handling and application of water-based inks, coatings and paints. | |
| DOWSIL™ 7 Additive | Dow Performance Silicones | DOWSIL™ 7 Additive is a foam control and leveling/wetting aid in solvent-based ink and coating systems. It is effective at low concentrations. The amount required depends on type of formulation, the solvent it contains, resin system and total system solid...view more DOWSIL™ 7 Additive is a foam control and leveling/wetting aid in solvent-based ink and coating systems. It is effective at low concentrations. The amount required depends on type of formulation, the solvent it contains, resin system and total system solids. view less | |
| DOWSIL™ 700P Additive | Dow Performance Silicones | DOWSIL™ 700P Additive is alkoxy siloxane with organic group and it provides high efficiency to disperse inorganic pigment, especially titanium dioxide. Only 10–15% dosage of ordinary dispersants is needed to get fine particles and high gloss/low haze of p...view more DOWSIL™ 700P Additive is alkoxy siloxane with organic group and it provides high efficiency to disperse inorganic pigment, especially titanium dioxide. Only 10–15% dosage of ordinary dispersants is needed to get fine particles and high gloss/low haze of paint. It also keeps good stabilization of pigment dispersion so that it can effectively prevent pigment flooding and floating when tinting. Unlike traditional anti-flooding additives which operate by controlled flocculation, this product does not increase viscosity and does not negatively impact gloss. view less | |
| DOWSIL™ 71 Additive | Dow Performance Silicones | DOWSIL™ 71 Additive is a polymeric silicone foam control agent. It provides effective foam control in a variety of waterborne coatings. This product is particularly suited for waterborne inks balancing effective foam control and good surface appearance. | |
| DOWSIL™ 74 Additive | Dow Performance Silicones | DOWSIL™ 74 Additive is a polymeric silicone foam control agent. It shows good compatibility in waterborne coating and ink systems and has a low tendency to cause surface defects. This product is particularly suited for applications where high shear stabil...view more DOWSIL™ 74 Additive is a polymeric silicone foam control agent. It shows good compatibility in waterborne coating and ink systems and has a low tendency to cause surface defects. This product is particularly suited for applications where high shear stability and ease of incorporation are needed. view less | |
| DOWSIL™ 84 Additive | Dow Performance Silicones | DOWSIL™ 84 Additive is a silicone additive for aqueous inks. It is used as an additive for water-based and dilutable inks to provide water and mild chemical resistance. It may be used as a protective and water-resistant coating for a variety of woven and ...view more DOWSIL™ 84 Additive is a silicone additive for aqueous inks. It is used as an additive for water-based and dilutable inks to provide water and mild chemical resistance. It may be used as a protective and water-resistant coating for a variety of woven and non-woven textiles and fabrics. view less | |
| DOWSIL™ 85 Additive | Dow Performance Silicones | DOWSIL™ 85 Additive is a silicone additive for aqueous inks. It is used as an additive for water-based and dilutable inks to provide water and mild chemical resistance. It may also be used as a protective and water-resistant coating for a variety of woven...view more DOWSIL™ 85 Additive is a silicone additive for aqueous inks. It is used as an additive for water-based and dilutable inks to provide water and mild chemical resistance. It may also be used as a protective and water-resistant coating for a variety of woven and non-woven textiles and fabrics. view less | |
| DOWSIL™ 8526 Additive | Dow Performance Silicones | DOWSIL™ 8526 Additive is an easy-to-use, high performance silicone polyether additive that gives improved leveling and slip in waterborne solvent based and UV curing formulations at low addition levels. It may be used as effective slip or leveling agent i...view more DOWSIL™ 8526 Additive is an easy-to-use, high performance silicone polyether additive that gives improved leveling and slip in waterborne solvent based and UV curing formulations at low addition levels. It may be used as effective slip or leveling agent in waterborne coating, solvent-based coating and UV curable coating. view less | |
| DOWSIL™ 8590 Additive | Dow Performance Silicones | DOWSIL™ 8590 Additive is a self-dispersible, 100 percent active silicone antifoam compound combining good compatibility and good defoaming efficiency, enabling foam control at low temperature in waterborne coatings and inks systems without impacting surfa...view more DOWSIL™ 8590 Additive is a self-dispersible, 100 percent active silicone antifoam compound combining good compatibility and good defoaming efficiency, enabling foam control at low temperature in waterborne coatings and inks systems without impacting surface gloss. DOWSIL™ 8590 Additive can be used as sole defoamer for both grind and let down stages. Usage level can be 50 to 70 percent less than conventional defoamers for comparable or better performance. view less | |
| DOWSIL™ 8590 Additive | Dow Performance Silicones | DOWSIL™ 8590 Additive is a 100% active silicone antifoam compound with silica. It shows good compatibility in waterborne coatings and ink systems and has a low tendency to cause surface defects. This product is recommended for a acrylic styrene emulsion p...view more DOWSIL™ 8590 Additive is a 100% active silicone antifoam compound with silica. It shows good compatibility in waterborne coatings and ink systems and has a low tendency to cause surface defects. This product is recommended for a acrylic styrene emulsion paint for architectural wall coatings, waterborne flexo gravure inks, waterborne acrylic overprint varnishes, and acrylic urethane emulsion paints for wood. view less | |
| DOWSIL™ 8603 Additive | Dow Performance Silicones | DOWSIL™ 8603 Additive is a 100% active silicone antifoam compound with silica. It offers effective foam control for waterborne coating systems, and performs at low dosages. This product is recommended for waterborne interior wall paints, acrylic styrene e...view more DOWSIL™ 8603 Additive is a 100% active silicone antifoam compound with silica. It offers effective foam control for waterborne coating systems, and performs at low dosages. This product is recommended for waterborne interior wall paints, acrylic styrene emulsion paints, waterborne flexo gravure inks, waterborne polyester acrylic coatings, and waterborne acrylic modified alkyd coatings. view less | |
| DOWSIL™ 8621 Additive | Dow Performance Silicones | DOWSIL™ 8621 Additive is a fluorosilicone supplied at 5% active concentration. It gives efficient foam control at very low addition level without surface defects in solvent based paints and UV curable coating. This product is also effective at low tempera...view more DOWSIL™ 8621 Additive is a fluorosilicone supplied at 5% active concentration. It gives efficient foam control at very low addition level without surface defects in solvent based paints and UV curable coating. This product is also effective at low temperatures, which makes it suitable for the winter season. view less | |
| DOWSIL™ 8628 Additive | Dow Performance Silicones | DOWSIL™ 8621 Additive is a fluorosilicone supplied at 5% active concentration. It gives efficient foam control at very low addition level without surface defects in solvent based paints and UV curable coating. This product is also effective at low tempera...view more DOWSIL™ 8621 Additive is a fluorosilicone supplied at 5% active concentration. It gives efficient foam control at very low addition level without surface defects in solvent based paints and UV curable coating. This product is also effective at low temperatures, which makes it suitable for the winter season. view less | |
| DOWSIL™ 87 Additive | Dow Performance Silicones | DOWSIL™ 87 Additive is a 40% active silane based emulsion. It can be used in waterborne acrylic formulations to improve water repellency. This product is solvent and APEO free, and is recommended for waterborne decorative coatings. | |
| DOWSIL™ 88 Additive | Dow Performance Silicones | DOWSIL™ 88 Additive is a 98% active silane/siloxane concentrate. It can be used in polar and non-polar solvent containing acrylic formulations to improve water repellency. This product can be used for the formulation of solvent-borne decorative coatings a...view more DOWSIL™ 88 Additive is a 98% active silane/siloxane concentrate. It can be used in polar and non-polar solvent containing acrylic formulations to improve water repellency. This product can be used for the formulation of solvent-borne decorative coatings and in waterborne formulations containing polar solvents. view less | |
| DOWSIL™ RSN-0217 Flake Resin | Dow Performance Silicones | DOWSIL™ RSN-0217 Flake Resin is a 100% phenyl silicone, silanol-functional flake for use as a binder for powder and liquid coatings. It offers good thermal stability, good weatherability, and good compatibility with organic resins. | |
| DOWSIL™ RSN-0220 Flake Resin | Dow Performance Silicones | DOWSIL™ RSN-0220 Flake Resin is a 100% silicone, silanol-functional resin for use as a binder for powder and liquid coatings. It offers good heat stability and weatherability, and can also be used to reduce VOC and improve film properties. | |
| DOWSIL™ RSN-0233 Flake Resin | Dow Performance Silicones | DOWSIL™ RSN-0233 Flake Resin is a 100% silicone, silanol-functional resin for use as a binder for powder and liquid coatings. It is used primarily as a powder coating binder or co-binder to improve heat stability and weatherability, in high temperature co...view more DOWSIL™ RSN-0233 Flake Resin is a 100% silicone, silanol-functional resin for use as a binder for powder and liquid coatings. It is used primarily as a powder coating binder or co-binder to improve heat stability and weatherability, in high temperature coatings where initial hardness and hot hardness are desired, as a blending resin with other silicone resins to improve hardness, and as a blending resin in solvent-based organic coatings to improve film properties. view less | |
| DOWSIL™ RSN-0249 Flake Resin | Dow Performance Silicones | DOWSIL™ RSN-0249 Flake Resin is a 100% silicone, silanol-functional resin for use as a binder for powder and liquid coatings. It offers excellent heat stability and good weatherability. | |
| DOWSIL™ RSN-0255 Flake Resin | Dow Performance Silicones | DOWSIL™ RSN-0255 Flake Resin is a 100% silicone, silanol-functional resin for use as a binder for powder and liquid coatings. It offers excellent heat stability and good weatherability. | |
| DOWSIL™ RSN-0409 HS Resin | Dow Performance Silicones | DOWSIL™ RSN-0409 HS Resin is an 80% solids, silanol-functional silicone resin for use in liquid coatings. It offers excellent heat stability and good weatherability. This product is chemically similar to DOWSIL™ RSN-0805 Resin. | |
| DOWSIL™ RSN-0431 HS Resin | Dow Performance Silicones | DOWSIL™ RSN-0431 HS Resin is an 80% solids, silanol-functional silicone resin for use in liquid coatings. It offers good heat stability and weatherability. This product is chemically similar to DOWSIL™ RSN-0840 Resin. | |
| DOWSIL™ RSN-0804 Resin | Dow Performance Silicones | DOWSIL™ RSN-0804 Resin is a silanol-functional resin supplied as a solvent solution. It offers excellent leafing properties and water resistance, very good gloss retention, and improves heat stability and weatherability of many organic resins. | |
| DOWSIL™ RSN-0805 Resin | Dow Performance Silicones | DOWSIL™ RSN-0805 Resin is a silanol-functional resin supplied as a solvent solution. It is intended for use primarily with metallic pigments in applications including maintenance paints, colored baking enamels and decorative finishes. DOWSIL™ RSN-0805 Res...view more DOWSIL™ RSN-0805 Resin is a silanol-functional resin supplied as a solvent solution. It is intended for use primarily with metallic pigments in applications including maintenance paints, colored baking enamels and decorative finishes. DOWSIL™ RSN-0805 Resin can be used alone or blended with DOWSIL™ RSN-0806 Resin to increase film hardness. view less | |
| DOWSIL™ RSN-0806 Resin | Dow Performance Silicones | DOWSIL™ RSN-0806 Resin is a silanol-functional resin for use in colored baking enamels for space heaters and stoves. It is stable and offers high-temperature performance. This product can be used alone or blended with other silicone resins, such as DOWSIL...view more DOWSIL™ RSN-0806 Resin is a silanol-functional resin for use in colored baking enamels for space heaters and stoves. It is stable and offers high-temperature performance. This product can be used alone or blended with other silicone resins, such as DOWSIL™ RSN-0805 Resin to enhance flexibility. view less | |
| DOWSIL™ RSN-0808 Resin | Dow Performance Silicones | DOWSIL™ RSN-0808 Resin is a silanol-functional silicon resin in xylene. It offers excellent flexibility, gloss retention, color retention, corrosion resistance, good heat resistance, weatherability, and useful leafing properties with metallic pigmented pa...view more DOWSIL™ RSN-0808 Resin is a silanol-functional silicon resin in xylene. It offers excellent flexibility, gloss retention, color retention, corrosion resistance, good heat resistance, weatherability, and useful leafing properties with metallic pigmented paints. view less | |
| DOWSIL™ RSN-0840 Resin | Dow Performance Silicones | DOWSIL™ RSN-0840 Resin is a silanol-functional silicone resin in toluene. It offers excellent leafing properties and water resistance, as well as very good gloss retention. Paints containing DOWSIL™ RSN-0840 Resin can give extremely high temperature prote...view more DOWSIL™ RSN-0840 Resin is a silanol-functional silicone resin in toluene. It offers excellent leafing properties and water resistance, as well as very good gloss retention. Paints containing DOWSIL™ RSN-0840 Resin can give extremely high temperature protection over short periods. This produces improves moisture resistance, heat stability, and weatherability of many organic resins. It also functions as a leveling agent to improve the surface appearance of organic protective coatings. view less | |
| DOWSIL™ RSN-6018 Resin Intermediate | Dow Performance Silicones | DOWSIL™ RSN-6018 Resin Intermediate is a silicone intermediate for colored and high-temperature finishes. It is a silanol-functional, low-molecular-weight silicone intermediate that reacts with a wide variety of organic resins and monomers. Resins modifie...view more DOWSIL™ RSN-6018 Resin Intermediate is a silicone intermediate for colored and high-temperature finishes. It is a silanol-functional, low-molecular-weight silicone intermediate that reacts with a wide variety of organic resins and monomers. Resins modified with this product show improved heat stability and weatherability over unmodified resins. view less | |
| DOWSIL™ US-CF 2403 Resin | Dow Performance Silicones | DOWSIL™ US-CF 2403 Resin is a methyl-methoxy functional, solvent-less and low molecular weight liquid siloxane. It can be used as a sole binder or in combination with organic resins, in both clear and pigmented formulations. | |
| DOWSIL™ Z-6121 Silane | Dow Performance Silicones | DOWSIL™ Z-6121 Silane is a multi-purpose silane adhesion promoter recommended for use with epoxy coatings, silicone resin-based coatings and alkyd finishes. It can be incorporated into epoxy coatings, can be used as a room-temperature curing agent for sil...view more DOWSIL™ Z-6121 Silane is a multi-purpose silane adhesion promoter recommended for use with epoxy coatings, silicone resin-based coatings and alkyd finishes. It can be incorporated into epoxy coatings, can be used as a room-temperature curing agent for silicone resin based coatings, and can be used with alkyd coatings. view less | |
| DOWSIL™ Z-6137 Silane | Dow Performance Silicones | DOWSIL™ Z-6137 Silane is an aqueous solution of a homopolymer of an aminofunctional silane. It should be used as an additive or primer in water-based systems to improve bonding between organic binder and inorganic substrate. | |
| HALOX® 350 | ICL Phosphate Specialty | HALOX® 350 by ICL is a zero-VOC, highly effective 97-100% solids organic corrosion inhibitor. It is designed for water-based formulations in order to provide flash-rust inhibition, in-can rust prevention, and improved adhesion performance. It is a low-odo...view more HALOX® 350 by ICL is a zero-VOC, highly effective 97-100% solids organic corrosion inhibitor. It is designed for water-based formulations in order to provide flash-rust inhibition, in-can rust prevention, and improved adhesion performance. It is a low-odor, nitrite-free, di-carboxylic acid-based grade. It is very effective at low loading levels and offers temporary corrosion protection. HALOX® 350 is an effective replacement for toxic nitrite-based flash rust inhibitors. It is compatible with water-based epoxies, polyurethanes, polyurethane dispersions, water-reducible alkyds, alkyd dispersions, and acrylics. It is also used in clear coats, thin films, and coil coatings. The recommended dosage level is 0.2-0.8% based on total solids formulation. It has a shelf life of 36 months. view less | Request Sample |
| HALOX® 430 | ICL Phosphate Specialty | HALOX® 430 by ICL is the newest generation, non-toxic, heavy metal-free, calcium phosphate-based anti-corrosive pigment. It is designed for use in waterborne and solvent-borne protective coating systems. It is based on a unique synergy between an ion scav...view more HALOX® 430 by ICL is the newest generation, non-toxic, heavy metal-free, calcium phosphate-based anti-corrosive pigment. It is designed for use in waterborne and solvent-borne protective coating systems. It is based on a unique synergy between an ion scavenging and passivation mechanism. It is used in solvent-based moisture cure polyurethanes, short-, medium- & long oil alkyds & silicones, and water-based polyurethane dispersions, water-reducible alkyds, and alkyd dispersions. HALOX® 430 is recommended for long-term applications where the use of heavy metals, such as zinc, strontium, barium, molybdenum, and chromate is of concern. The dosage level for solvent-borne and waterborne 2K epoxy, alkyds & modified alkyds polyurethane is 6-10% & 3-6% respectively, for waterborne acrylic copolymer is 3-5%, and for solvent-borne polyester melamine/TGIC is 6-9%. It has a shelf life of 36 months. view less | Request Sample |
| HALOX® 430 JM | ICL Phosphate Specialty | HALOX® 430 JM by ICL is a new generation heavy metal-free corrosion inhibitor designed for waterborne and solvent-borne protective coating systems. It is a jet-milled version of the patented calcium phosphate and ion exchange technology. It is a non-toxic...view more HALOX® 430 JM by ICL is a new generation heavy metal-free corrosion inhibitor designed for waterborne and solvent-borne protective coating systems. It is a jet-milled version of the patented calcium phosphate and ion exchange technology. It is a non-toxic, anti-corrosive pigment. It is based on the synergy between an ion scavenging and passivation mechanism. HALOX® 430 JM is recommended for use in long-term applications where the use of heavy metals such as zinc, strontium, barium, molybdenum, and chromate is of concern. It is suitable for epoxy esters, moisture-cure polyurethanes, short-, medium- & long oil alkyds, and silicones. It can also be used in clear-, powder-, aerospace- & coil coatings and wash & etch primer. It offers significant advantages such as thin film applications (<10 microns), easier to disperse, cleaner grinds, and improved efficiency. The dosage level for the coating systems such as water- & solventborne 2K epoxy is 2-6% & 8-12% & for alkyds, modified alkyds, and 2K polyurethane is 2-6% & 6-10% respectively, for waterborne acrylic copolymer is 2-5% and for solvent-borne polyester melamine/TGIC is 6-9%. It has a shelf life of 36 months. view less | Request Sample |
| HALOX® 515 | ICL Phosphate Specialty | HALOX® 515 by ICL is an aminocarboxylate salt-based, liquid organic corrosion inhibitor for high gloss (direct-to-metal) coating systems. It is effective as a flash rust inhibitor on weld seams. It is suitable for water-based acrylic DTM, acrylic primers,...view more HALOX® 515 by ICL is an aminocarboxylate salt-based, liquid organic corrosion inhibitor for high gloss (direct-to-metal) coating systems. It is effective as a flash rust inhibitor on weld seams. It is suitable for water-based acrylic DTM, acrylic primers, polyurethane, water-dispersible alkyds, and water-reducible alkyds. It provides cost-effective flash rust protection and long-term corrosion protection. It is also effective for thin film applications (<2 mils). HALOX® 515 is heavy metal- & nitrite-free and contains no chromates or phosphates. It provides improved adhesion at the scribe and good humidity resistance. It can be easily and effectively post-added or added in the letdown stage of any coating system. The dosage level of the grade is 1-3% based on the total formula weight. It has a shelf life of 24 months. view less | Request Sample |
| HALOX® 515 LFG | ICL Phosphate Specialty | HALOX® 515 LFG by ICL is a low-freeze, liquid organic corrosion inhibitor based on amino-carboxylate salt. It is effective as a flash rust inhibitor on weld seams. It is recommended for high gloss (direct to metal) coating systems. It provides cost-effect...view more HALOX® 515 LFG by ICL is a low-freeze, liquid organic corrosion inhibitor based on amino-carboxylate salt. It is effective as a flash rust inhibitor on weld seams. It is recommended for high gloss (direct to metal) coating systems. It provides cost-effective flash rust protection and long-term corrosion protection. It is also effective for thin-film applications (<2 mils). It is heavy metal- & nitrite-free grade and contains no chromates or phosphates. It offers improved adhesion at the scribe and good humidity resistance. HALOX® 515 LFG can easily and effectively be post-added or added in the letdown stage of any coating system. Recommended loading level is 1-3% based on total formula weight. It has a shelf life of 24 months. view less | Request Sample |
| HALOX® 520 | ICL Phosphate Specialty | HALOX® 520 by ICL is a liquid organic corrosion inhibitor and adhesion promoter. It can also be used as a metal pretreatment additive. It is designed for water-borne and solvent-based coatings systems. It is polymeric amine salt, approximately 60% active ...view more HALOX® 520 by ICL is a liquid organic corrosion inhibitor and adhesion promoter. It can also be used as a metal pretreatment additive. It is designed for water-borne and solvent-based coatings systems. It is polymeric amine salt, approximately 60% active in ethanol. HALOX® 520 may be used in waterborne formulations such as 2-pack epoxy systems, 1 and 2-pack polyurethanes, acrylics (especially epoxy/amine functionalized), and hybrid systems. The dosage level of the grade is 0.5-1.5% based on total formulation solids. It has a shelf life of 36 months. view less | Request Sample |
| HALOX® 550 | ICL Phosphate Specialty | HALOX® 550 by ICL is an inorganic-organic hybrid sol-gel corrosion inhibitor that protects water-based and solvent-based coatings. It can boost the adhesion of the systems through the development of a sol-gel network and the formation of hydrophobic nano-...view more HALOX® 550 by ICL is an inorganic-organic hybrid sol-gel corrosion inhibitor that protects water-based and solvent-based coatings. It can boost the adhesion of the systems through the development of a sol-gel network and the formation of hydrophobic nano-domains within the coating. It is suitable for clear coats, direct-to-metal, latex primers, thin film coatings, acrylic emulsions, water-dispersible alkyds, alkyd emulsions, polyesters, epoxy, urethane, and high gloss coatings. It is easy to disperse, post-addable, and reduces white rust on galvanized and black rust on Galvalume™. It offers increased hydrophobicity, improved anti-fingerprint, and no effect on gloss. It provides reduced silver, aluminum oxidation and high-temperature stability. HALOX® 550 is non-flammable, pH stable, and has a low freeze point. It is a temporary rust inhibitor for cold-rolled steel, blasted steel, and aluminum. It can impart corrosion resistance to final metal rinsing solutions. The dosage level for water-based acrylic is 1-4%, alkyd is 0.5-2%, epoxy is 1-4%, urethane is 0.5-3%, hybrids & others is 0.5-4%. It has a shelf life of 12 months. view less | Request Sample |
| HALOX® 550 WF | ICL Phosphate Specialty | HALOX® 550 WF by ICL is a water-free, sol-gel-based corrosion inhibitor and adhesion promoter. It is designed for corrosion protection in thin film coatings. It is recommended for the protection of water-based and solvent-based clear coats, glossy direct-...view more HALOX® 550 WF by ICL is a water-free, sol-gel-based corrosion inhibitor and adhesion promoter. It is designed for corrosion protection in thin film coatings. It is recommended for the protection of water-based and solvent-based clear coats, glossy direct-to-metal coatings, and acrylic emulsions. It is recommended for polyurethanes, epoxies, epoxy esters, alkyds, water-reducible alkyds, PVB wash primers, and polyester resins. It is suitable for low pH and acid-catalyzed systems. The dosage level is 0.5-3.0% based on the total formula weight. HALOX® 550 WF has a shelf life of 12 months. view less | Request Sample |
| HALOX® 570 | ICL Phosphate Specialty | HALOX® 570 by ICL is an organic corrosion inhibitor. It is designed for use in water-based industrial and decorative coatings to provide flash rust and long-term corrosion protection on metal surfaces. It is an environmentally-friendly, nitrite-free, phos...view more HALOX® 570 by ICL is an organic corrosion inhibitor. It is designed for use in water-based industrial and decorative coatings to provide flash rust and long-term corrosion protection on metal surfaces. It is an environmentally-friendly, nitrite-free, phosphate-free, and heavy metal-free, which can provide synergy with inorganic anti-corrosives. It is especially effective along weld seams and in some cases, can also be used in solvent-based coatings and in UV-cured systems. It is used in both water-based primers and direct-to-metal topcoats and has minimal effect on gloss reduction. HALOX® 570 can be used in formulations based on water-based acrylic latexes and co-polymers, styrene/acrylic latexes, acrylated epoxy esters, thin films, 2-pack epoxy systems, alkyds, alkyd/acrylic blends, and 1 or 2 pack polyurethane. It has a shelf life of 36 months. view less | Request Sample |
| HALOX® 570 LS | ICL Phosphate Specialty | HALOX® 570 LS by ICL is an organic corrosion inhibitor. It is a liquid version of HALOX® 570 (powder). It is designed for use in water-based industrial and decorative coatings. It provides flash rust and long-term corrosion protection on metal surfaces. I...view more HALOX® 570 LS by ICL is an organic corrosion inhibitor. It is a liquid version of HALOX® 570 (powder). It is designed for use in water-based industrial and decorative coatings. It provides flash rust and long-term corrosion protection on metal surfaces. It is environmentally friendly, nitrite-, phosphate- & heavy metal-free, and can provide synergy with inorganic anti-corrosives. It is especially effective along weld seams to prevent galvanic corrosion. HALOX® 570 LS can be used in formulations based on water-based acrylics, epoxy esters, 2-component epoxy, water-reducible alkyds, and water-based polyurethanes. It is suitable for primers and direct-to-metal topcoats. It has minimal effect on gloss reduction. Recommended dosage level is 1-3% based on total formula weight. It has a shelf life of 36 months. view less | Request Sample |
| HALOX® 630 | ICL Phosphate Specialty | HALOX® 630 by ICL is a liquid organic corrosion inhibitor for solvent-based protective coatings on metal surfaces. It is an alkylammonium salt solution, a 70% active substance in xylene. It can be used in solvent-borne clear or pigmented coatings and in s...view more HALOX® 630 by ICL is a liquid organic corrosion inhibitor for solvent-based protective coatings on metal surfaces. It is an alkylammonium salt solution, a 70% active substance in xylene. It can be used in solvent-borne clear or pigmented coatings and in systems such as 2-pack epoxy systems, high solids epoxy esters, alkyds, acrylic resins, silicones, polyesters, and 2-pack polyurethane primers. It is recommended for auto refinish, OEM, DTM, industrial and marine coatings. HALOX® 630 shows superior corrosion resistance over poorly prepared surfaces, such as adherent rust or oil contamination. The dosage level of the grade is 1-3% based on the total formula weight. It has a shelf life of 36 months. view less | Request Sample |
| HALOX® 650 | ICL Phosphate Specialty | HALOX® 650 by ICL is a zero-VOC, organic corrosion inhibitor. It is designed specifically for solvent-based or powder-coating applications to provide long-term corrosion protection, flash-rust inhibition, in-can rust prevention, and improved adhesion perf...view more HALOX® 650 by ICL is a zero-VOC, organic corrosion inhibitor. It is designed specifically for solvent-based or powder-coating applications to provide long-term corrosion protection, flash-rust inhibition, in-can rust prevention, and improved adhesion performance. It is primarily designed for coatings and primers on metal surfaces. It can be used in applications such as coil coatings resins such as thermoplastic acrylics or epoxies, powder coatings systems such as polyester/TGIC, acid catalyzed thermosetting systems such as melamine or urea formaldehyde, and wash (etch) primers based on PVB. It is suitable for solvent-based polyurethanes, short-, medium- & long oil alkyds, and silicones. It is also suitable for clear coats, thin films, and aerospace coating. The dosage level of the grade is 1-3% based on total formulation solids. HALOX® 650 has a shelf life of 36 months. view less | Request Sample |
| HALOX® 700 | ICL Phosphate Specialty | HALOX® 700 by ICL is a white, non-refractive, zinc & aluminum phosphate-based corrosion-inhibiting pigment for protective coatings. It is designed to provide coatings with early and long-term corrosion protection. It is recommended for solvent- and water-...view more HALOX® 700 by ICL is a white, non-refractive, zinc & aluminum phosphate-based corrosion-inhibiting pigment for protective coatings. It is designed to provide coatings with early and long-term corrosion protection. It is recommended for solvent- and water-based epoxy and urethane coatings. It is suitable for alkyd and acrylic coatings. It can be used in combination with HALOX® 700. The dosage level of HALOX® 700 is 5-12% based on total formula weight. It has a shelf life of 36 months. view less | Request Sample |
| HALOX® BW-100 | ICL Phosphate Specialty | HALOX® BW-100 by ICL is a low-cost tannin stain-inhibiting pigment used in exterior architectural wood coatings. It is barium phosphosilicate-based, non-refractive grade used in protective coating systems. It provides minimal hiding with decent exterior d...view more HALOX® BW-100 by ICL is a low-cost tannin stain-inhibiting pigment used in exterior architectural wood coatings. It is barium phosphosilicate-based, non-refractive grade used in protective coating systems. It provides minimal hiding with decent exterior durability. It provides performance and compatibility in a variety of resin systems such as acrylic latexes, vinyl acrylic latexes, styrenated acrylic latexes, and solvent-based alkyds. It is suitable for water-based systems. It is effective in high PVC alkyd primers and demonstrates excellent performance. The dosage level of HALOX® BW-100 is 5-10% based on total formula weight. It has a shelf life of 36 months. view less | Request Sample |
| HALOX® BW-111 | ICL Phosphate Specialty | HALOX® BW-111 by ICL is a low-cost barium phosphosilicate-based corrosion inhibiting pigment. It is a white, non-refractive pigment designed for long-term corrosion protection. It is used in protective coating systems. It is recommended for use in solvent...view more HALOX® BW-111 by ICL is a low-cost barium phosphosilicate-based corrosion inhibiting pigment. It is a white, non-refractive pigment designed for long-term corrosion protection. It is used in protective coating systems. It is recommended for use in solvent-based epoxy systems, both conventional and high solids. The dosage level is 5-10% based on total formula weight for conventional systems and 10-20% based on total formula weight in higher solids systems. HALOX® BW-111 has a shelf life of 36 months. view less | Request Sample |
| HALOX® BW-191 | ICL Phosphate Specialty | HALOX® BW-191 by ICL is a corrosion-inhibiting pigment used in protective primer coating systems. It is barium phosphosilicate-based, white, non-refractive grade, and is an organic surface-treated version of HALOX®BW-111. It is recommended for most solven...view more HALOX® BW-191 by ICL is a corrosion-inhibiting pigment used in protective primer coating systems. It is barium phosphosilicate-based, white, non-refractive grade, and is an organic surface-treated version of HALOX®BW-111. It is recommended for most solvent-based and waterborne systems such as latexes and water reducible due to its lower oil absorption. HALOX® BW-191 can also be effective in anti-corrosive high solids coatings. The dosage level of the grade is 5-10% based on the total formula weight. It has a shelf life of 36 months. view less | Request Sample |
| HALOX® CW-22/221 | ICL Phosphate Specialty | HALOX® CW-22/221 by ICL is a white, non-refractive, calcium borosilicate-based corrosion inhibiting pigment for protective coating systems. It is suitable for water-based epoxies, polyurethanes, polyurethane dispersions, water-reducible alkyds, and alkyd ...view more HALOX® CW-22/221 by ICL is a white, non-refractive, calcium borosilicate-based corrosion inhibiting pigment for protective coating systems. It is suitable for water-based epoxies, polyurethanes, polyurethane dispersions, water-reducible alkyds, and alkyd dispersions. It is designed for long-term corrosion protection where the use of heavy metals is discouraged. It is recommended for use in primer systems based on traditional solvent alkyd technology. Recommended dosage level is 9-15% based on total formula weight with PVC level in the range of 42-47%. It has a shelf life of 36 months. HALOX® CW-22/221 is compliant with ASTM D4288-83, specification for calcium borosilicate pigment Type 1, Class A. view less | Request Sample |
| HALOX® CW-2230 | ICL Phosphate Specialty | HALOX® CW-2230 by ICL is calcium borosilicate-based corrosion-inhibiting pigment. It is engineered for long-term corrosion protection where the use of heavy metal-containing corrosion inhibitors is a problem. It is a white, non-refractive pigment used in ...view more HALOX® CW-2230 by ICL is calcium borosilicate-based corrosion-inhibiting pigment. It is engineered for long-term corrosion protection where the use of heavy metal-containing corrosion inhibitors is a problem. It is a white, non-refractive pigment used in protective coating systems. It is suitable for solvent-based epoxies, moisture-cure polyurethanes, polyesters, silicone, water-based epoxy, polyurethane dispersions, water-reducible alkyds, alkyd dispersions, and acrylics. It has the highest borate content and can be effectively formulated into such resins as medium and long-oil alkyds and epoxy-esters. Recommended dosage levels range from 9-15% based on total formula weight with PVC levels ranging from 42-47%. It has a shelf life of 36 months. HALOX® CW-2230 is compliant with ASTM D4288-83, specification for calcium borosilicate pigment Type 2. view less | Request Sample |
| HALOX® CW-291 | ICL Phosphate Specialty | HALOX® CW-291 by ICL is calcium borosilicate-based corrosion inhibiting pigment. It is designed for long-term corrosion protection where heavy metals are a concern. It is used in solvent-based epoxy esters, polyurethanes and short-, medium- & long oil alk...view more HALOX® CW-291 by ICL is calcium borosilicate-based corrosion inhibiting pigment. It is designed for long-term corrosion protection where heavy metals are a concern. It is used in solvent-based epoxy esters, polyurethanes and short-, medium- & long oil alkyds, and water-based epoxies, water-reducible alkyds, and alkyd dispersions. It has the lowest oil absorption. It is recommended for use in protective coating systems. HALOX® CW-291 is specifically suggested for high solids, medium gloss topcoats, DTM (direct-to-metal) finishes, and self-priming systems. Recommended dosage level is 5-10% based on total formula weight in primer systems and 2-5% based on total formula weight in topcoat & DTM finishes. It has a shelf life of 36 months. It is compliant with ASTM D4288-83, specification for calcium borosilicate pigment type 1, Class B. view less | Request Sample |
| HALOX® CW-314 | ICL Phosphate Specialty | HALOX® CW-314 by ICL is a patent pending, non-toxic, heavy metal-free anti-corrosive pigment designed for use in waterborne and solvent-borne protective coating systems. It is very effective in enhancing the infrared (IR) reflectance and thermal emissivit...view more HALOX® CW-314 by ICL is a patent pending, non-toxic, heavy metal-free anti-corrosive pigment designed for use in waterborne and solvent-borne protective coating systems. It is very effective in enhancing the infrared (IR) reflectance and thermal emissivity of elastomeric roof coatings. It increases the total solar reflectance (TSR) while maintaining the dirt pick-up resistance (DPUR) and prevention mildew growth. It can be used alone or in combination with other non-toxic corrosion inhibitors and mineral pigments in the formulation of environmentally friendly specialty paints. HALOX® CW-314 is especially suited for systems where 21 CFR 175.300 approval or conformance to ANSI/NSF standards is required. It is also used in potable water tank linings and pipe coatings. The dosage level for potable water tank linings & pipe coatings is 3-8% based on total formula weight and 10-30% for elastomeric roof coatings containing calcium carbonate & titanium dioxide. It has a shelf life of 36 months. view less | Request Sample |
| HALOX® CW-491 | ICL Phosphate Specialty | HALOX® CW-491 by ICL is a low-cost, moderate solubility calcium phosphosilicate-based corrosion inhibiting pigment. It is designed to provide mid-level corrosion protection. It is suitable for solvent-based epoxy, epoxy ester, and short-, medium- & long o...view more HALOX® CW-491 by ICL is a low-cost, moderate solubility calcium phosphosilicate-based corrosion inhibiting pigment. It is designed to provide mid-level corrosion protection. It is suitable for solvent-based epoxy, epoxy ester, and short-, medium- & long oil alkyds. It is also suitable for water-based epoxy, wash primers, direct-to-metal finishes, 2k solvent-based epoxies, water-reducible alkyds, acrylics, polyvinyl chloride resins, and polyesters. HALOX® CW-491 is a white, non-refractive, zinc-, & heavy metal-free grade that is used for protective coating systems. The dosage level of the grade is 5-8% based on the total formula weight for water-based systems and 7-12% based on the total formula weight for solvent-based systems. It has a shelf life of 36 months. view less | Request Sample |
| HALOX® CZ-170 | ICL Phosphate Specialty | HALOX® CZ-170 by ICL is a universal corrosion and tannin stain-inhibiting pigment. It is designed for architectural and protective coating systems and multi-substrate protection. It is barium- & antimony-free, non-refractive grade. It is an effective repl...view more HALOX® CZ-170 by ICL is a universal corrosion and tannin stain-inhibiting pigment. It is designed for architectural and protective coating systems and multi-substrate protection. It is barium- & antimony-free, non-refractive grade. It is an effective replacement for zinc oxide. It can also be used in high gloss (+75 gloss units at 60°) and thin film (<1.0 mils or 25 microns) applications, due to its finer mean particle size and narrow particle size distribution. It is suitable for water-based epoxy esters, short-, medium- & long oil alkyd, and solvent-based water-reducible alkyds, alkyd dispersions, and acrylics. HALOX® CZ-170 can be used in specific systems that protect metal and wood substrates. It is also used in powder coatings and wash & etch primers. The dosage level for multi-substrate water-based systems is 2-5% by total formula weight and 0.5-2% for high gloss & thin film coatings. It has a shelf life of 36 months. view less | Request Sample |
