| B-TOUGH A1, TOUGHENING AGENT FOR EPOXY ADHESIVES | Croda Coatings & Polymers | Epoxy functionalized toughening agent for structural resins and adhesives. It brings excellent stability, low moisture diffusion, and easy handling. B-Tough A1 is recommended for use in liquid type epoxy systems (lowest polarity grade). | |
| B-TOUGH A2, TOUGHENING AGENT FOR EPOXY ADHESIVES | Croda Coatings & Polymers | Epoxy functionalized toughening agent for structural resins and adhesives. It brings excellent stability, low moisture diffusion, and easy handling. B-Tough A2 is recommended for use in liquid and/or solid type epoxy systems (low polarity grade). | |
| B-TOUGH A3, TOUGHENING AGENT FOR EPOXY ADHESIVES | Croda Coatings & Polymers | Epoxy functionalized toughening agent for structural resins and adhesives. It brings excellent stability, low moisture diffusion, and easy handling. B-Tough A3 is recommended for use in solid type epoxy formulations (medium polarity grade). | |
| Brij™ C2 | Croda Coatings & Polymers | Brij™ C2 is a multifunctional, non-silicone and non-fluorinated white, waxy solid wetting agent with excellent environmental profiles. This product is a part of the Brij range of nonionic surfactants which are natural fatty ethers derived from a variety o...view more Brij™ C2 is a multifunctional, non-silicone and non-fluorinated white, waxy solid wetting agent with excellent environmental profiles. This product is a part of the Brij range of nonionic surfactants which are natural fatty ethers derived from a variety of straight and branched chain alcohols. The function and application of the Brij range is dependent on both the source fatty alcohol and the degree of ethoxylation. view less | |
| Brij™ C20 | Croda Coatings & Polymers | Brij™ C20 is a multifunctional, non-silicone and non-fluorinated white, waxy solid wetting agent with excellent environmental profiles. This product is a part of the Brij range of nonionic surfactants which are natural fatty ethers derived from a variety ...view more Brij™ C20 is a multifunctional, non-silicone and non-fluorinated white, waxy solid wetting agent with excellent environmental profiles. This product is a part of the Brij range of nonionic surfactants which are natural fatty ethers derived from a variety of straight and branched chain alcohols. The function and application of the Brij range is dependent on both the source fatty alcohol and the degree of ethoxylation. view less | |
| Brij™ L23 | Croda Coatings & Polymers | Brij™ L23 is a multifunctional, non-silicone and non-fluorinated white, waxy solid wetting agent with excellent environmental profiles. This product is a part of the Brij range of nonionic surfactants which are natural fatty ethers derived from a variety ...view more Brij™ L23 is a multifunctional, non-silicone and non-fluorinated white, waxy solid wetting agent with excellent environmental profiles. This product is a part of the Brij range of nonionic surfactants which are natural fatty ethers derived from a variety of straight and branched chain alcohols. The function and application of the Brij range is dependent on both the source fatty alcohol and the degree of ethoxylation. view less | |
| Brij™ L4 | Croda Coatings & Polymers | Brij™ L4 is a multifunctional, non-silicone and non-fluorinated colorless, liquid wetting agent with excellent environmental profiles. This product is a part of the Brij range of nonionic surfactants which are natural fatty ethers derived from a variety o...view more Brij™ L4 is a multifunctional, non-silicone and non-fluorinated colorless, liquid wetting agent with excellent environmental profiles. This product is a part of the Brij range of nonionic surfactants which are natural fatty ethers derived from a variety of straight and branched chain alcohols. The function and application of the Brij range is dependent on both the source fatty alcohol and the degree of ethoxylation. view less | |
| Brij™ O10 | Croda Coatings & Polymers | Brij™ O10 is a multifunctional, non-silicone and non-fluorinated pale yellow liquid wetting agent with excellent environmental profiles. This product is a part of the Brij range of nonionic surfactants which are natural fatty ethers derived from a variety...view more Brij™ O10 is a multifunctional, non-silicone and non-fluorinated pale yellow liquid wetting agent with excellent environmental profiles. This product is a part of the Brij range of nonionic surfactants which are natural fatty ethers derived from a variety of straight and branched chain alcohols. The function and application of the Brij range is dependent on both the source fatty alcohol and the degree of ethoxylation. view less | |
| Brij™ O2 | Croda Coatings & Polymers | Brij™ O2 is a multifunctional, non-silicone and non-fluorinated pale yellow liquid wetting agent with excellent environmental profiles. This product is a part of the Brij range of nonionic surfactants which are natural fatty ethers derived from a variety ...view more Brij™ O2 is a multifunctional, non-silicone and non-fluorinated pale yellow liquid wetting agent with excellent environmental profiles. This product is a part of the Brij range of nonionic surfactants which are natural fatty ethers derived from a variety of straight and branched chain alcohols. The function and application of the Brij range is dependent on both the source fatty alcohol and the degree of ethoxylation. view less | |
| Brij™ O20 | Croda Coatings & Polymers | Brij™ O20 is a multifunctional, non-silicone and non-fluorinated pale yellow liquid wetting agent with excellent environmental profiles. This product is a part of the Brij range of nonionic surfactants which are natural fatty ethers derived from a variety...view more Brij™ O20 is a multifunctional, non-silicone and non-fluorinated pale yellow liquid wetting agent with excellent environmental profiles. This product is a part of the Brij range of nonionic surfactants which are natural fatty ethers derived from a variety of straight and branched chain alcohols. The function and application of the Brij range is dependent on both the source fatty alcohol and the degree of ethoxylation. view less | |
| Brij™ S10 | Croda Coatings & Polymers | Brij™ S10 is a multifunctional, non-silicone and non-fluorinated white, waxy solid wetting agent with excellent environmental profiles. This product is a part of the Brij range of nonionic surfactants which are natural fatty ethers derived from a variety ...view more Brij™ S10 is a multifunctional, non-silicone and non-fluorinated white, waxy solid wetting agent with excellent environmental profiles. This product is a part of the Brij range of nonionic surfactants which are natural fatty ethers derived from a variety of straight and branched chain alcohols. The function and application of the Brij range is dependent on both the source fatty alcohol and the degree of ethoxylation. view less | |
| Brij™ S100 | Croda Coatings & Polymers | Brij™ S100 is a multifunctional, non-silicone and non-fluorinated white, waxy solid wetting agent with excellent environmental profiles. This product is a part of the Brij range of nonionic surfactants which are natural fatty ethers derived from a variety...view more Brij™ S100 is a multifunctional, non-silicone and non-fluorinated white, waxy solid wetting agent with excellent environmental profiles. This product is a part of the Brij range of nonionic surfactants which are natural fatty ethers derived from a variety of straight and branched chain alcohols. The function and application of the Brij range is dependent on both the source fatty alcohol and the degree of ethoxylation. view less | |
| Brij™ S2 | Croda Coatings & Polymers | Brij™ S2 is a multifunctional, non-silicone and non-fluorinated white, waxy solid wetting agent with excellent environmental profiles. This product is a part of the Brij range of nonionic surfactants which are natural fatty ethers derived from a variety o...view more Brij™ S2 is a multifunctional, non-silicone and non-fluorinated white, waxy solid wetting agent with excellent environmental profiles. This product is a part of the Brij range of nonionic surfactants which are natural fatty ethers derived from a variety of straight and branched chain alcohols. The function and application of the Brij range is dependent on both the source fatty alcohol and the degree of ethoxylation. view less | |
| Brij™ S20 | Croda Coatings & Polymers | Brij™ S20 is a multifunctional, non-silicone and non-fluorinated white, waxy solid wetting agent with excellent environmental profiles. This product is a part of the Brij range of nonionic surfactants which are natural fatty ethers derived from a variety ...view more Brij™ S20 is a multifunctional, non-silicone and non-fluorinated white, waxy solid wetting agent with excellent environmental profiles. This product is a part of the Brij range of nonionic surfactants which are natural fatty ethers derived from a variety of straight and branched chain alcohols. The function and application of the Brij range is dependent on both the source fatty alcohol and the degree of ethoxylation. view less | |
| Brij™ S721 | Croda Coatings & Polymers | Brij™ S721 is a multifunctional, non-silicone and non-fluorinated white, waxy solid wetting agent with excellent environmental profiles. This product is a part of the Brij range of nonionic surfactants which are natural fatty ethers derived from a variety...view more Brij™ S721 is a multifunctional, non-silicone and non-fluorinated white, waxy solid wetting agent with excellent environmental profiles. This product is a part of the Brij range of nonionic surfactants which are natural fatty ethers derived from a variety of straight and branched chain alcohols. The function and application of the Brij range is dependent on both the source fatty alcohol and the degree of ethoxylation. view less | |
| CRODACOR BE | Croda Coatings & Polymers | Water-soluble corrosion inhibitor compatible in a wide range of formulations, particularly aqueous based formulations contained within tin plated steel aerosol cans. | |
| Crodafos™ T6A | Croda Coatings & Polymers | Crodafos™ T6A is a POE isotridecyl phosphate used as a formulation enhancer to solve challenges in aqueous and non-aqueous formulations. It is a multifunctional non-silicone and non-fluorinated wetting agent with excellent environmental profiles. It also ...view more Crodafos™ T6A is a POE isotridecyl phosphate used as a formulation enhancer to solve challenges in aqueous and non-aqueous formulations. It is a multifunctional non-silicone and non-fluorinated wetting agent with excellent environmental profiles. It also functions as a highly efficient emulsifier with improved cycle time and excellent stability, covering a wide range of HLB values to match any formulation needs. view less | |
| Crodamide S | Croda Coatings & Polymers | Crodamide S is a fast migrating primary amide additive which gives excellent anti-blocking performance at low temperatures. Adhesive pellets or film often exhibit adhesion between the polymer pellets or layers when exposed to elevated temperatures and pre...view more Crodamide S is a fast migrating primary amide additive which gives excellent anti-blocking performance at low temperatures. Adhesive pellets or film often exhibit adhesion between the polymer pellets or layers when exposed to elevated temperatures and pressures. This product is used to prevent adhesive granulates from sticking together during storage at moderate and low temperatures. Crodamide S also prevents adhesive film layers to attract dirt or stick together before application by reactivation or melting. It can be incorporated directly into polymers to prevent any unwanted adhesion. The amide migrates fast to the surface of the material on cooling to form a non-sticking ‘release’ layer. It may be used in conjunction with organic additives such as talc to enhance performance. view less | |
| Hypermer A70 | Croda Coatings & Polymers | Hypermer A70 is a polymeric O/W emulsifier and dispersant in non polar liquids for superior colloidal stability and minimum impact on coating properties. | |
| LoVOCoat Form 100 - Polymeric Surfactant | Croda Coatings & Polymers | LoVOCoat Form 100 - Polymeric Surfactant is a polymeric surfactant and is 20% in Exxsol D80. It is especially developed to develop high quality, low VOC trim paints, varnishes, and stains. | |
| LoVOCoat Stable 100 - Polymeric Surfactant | Croda Coatings & Polymers | LoVOCoat Stable 100 - Polymeric Surfactant is a polymeric surfactant and is 20% in water. It is especially developed to develop high quality, low VOC trim paints, varnishes, and stains. | |
| Maxemul 5010 - Copolymerizable Nonionic Surfactant | Croda Coatings & Polymers | Maxemul 5010 - Copolymerizable Nonionic Surfactant is a non-migratory, non-ionic surfactant for emulsion polymerisation, synthesis of binders for coatings and adhesives with excellent emulsion stability, dry films with excellent moisture resistance, and e...view more Maxemul 5010 - Copolymerizable Nonionic Surfactant is a non-migratory, non-ionic surfactant for emulsion polymerisation, synthesis of binders for coatings and adhesives with excellent emulsion stability, dry films with excellent moisture resistance, and electrolyte tolerance. view less | |
| Maxemul 5011 - Copolymerizable Nonionic Surfactant | Croda Coatings & Polymers | Maxemul 5011 - Copolymerizable Nonionic Surfactant is a non-migratory, non-ionic surfactant for emulsion polymerisation, synthesis of binders for coatings and adhesives with excellent emulsion stability, dry films with excellent moisture resistance, and e...view more Maxemul 5011 - Copolymerizable Nonionic Surfactant is a non-migratory, non-ionic surfactant for emulsion polymerisation, synthesis of binders for coatings and adhesives with excellent emulsion stability, dry films with excellent moisture resistance, and electrolyte tolerance. view less | |
| Maxemul 6106 - Copolymerizable Anionic Surfactant | Croda Coatings & Polymers | Maxemul 6106 - Copolymerizable Anionic Surfactant is a non-migratory, non-ionic surfactant for emulsion polymerisation, synthesis of binders for coatings and adhesives with excellent emulsion stability, dry films with excellent moisture resistance, and el...view more Maxemul 6106 - Copolymerizable Anionic Surfactant is a non-migratory, non-ionic surfactant for emulsion polymerisation, synthesis of binders for coatings and adhesives with excellent emulsion stability, dry films with excellent moisture resistance, and electrolyte tolerance. view less | |
| Maxemul 6112 - Copolymerizable Anionic Surfactant | Croda Coatings & Polymers | Maxemul 6112 - Copolymerizable Anionic Surfactant is a non-migratory, anionic surfactant for superior emulsion stability in latex systems and excellent moisture resistance or adhesive properties in coatings or psa's. | |
| Maxemul™ 7000 Series | Croda Coatings & Polymers | Maxemul™ 7000 Series are novel polymeric non-migratory and polymeric reactive emulsifiers. The coatings produced from these resin emulsions result in properties that are essentially equal to that of solvent-borne systems. The current global regulatory dir...view more Maxemul™ 7000 Series are novel polymeric non-migratory and polymeric reactive emulsifiers. The coatings produced from these resin emulsions result in properties that are essentially equal to that of solvent-borne systems. The current global regulatory directives will dramatically change the coatings market in the coming years and solvent-borne resins could disappear. One use of these polymeric non-migratory or reactive emulsifiers is to produce zero VOC resin emulsions to overcome these regulatory issues. view less | |
| Maxemul™ 7201 | Croda Coatings & Polymers | Maxemul™ 7201 is an anionic surfactant, oil soluble, resin compatible, pigment wetter and dispersant for aqueous and non-aqueous dispersions, resin emulsifier, and compatibiliser. It has improved cycle time and excellent stability, covering a wide range o...view more Maxemul™ 7201 is an anionic surfactant, oil soluble, resin compatible, pigment wetter and dispersant for aqueous and non-aqueous dispersions, resin emulsifier, and compatibiliser. It has improved cycle time and excellent stability, covering a wide range of HLB values to match your formulation needs. This product is used for industrial coatings and decorative coatings and paints. view less | |
| Maxemul™ 8201 | Croda Coatings & Polymers | Maxemul™ 8201 is a reactive nonionic polymeric emulsifier that produces zero VOC resin emulsions with small particle size and good shelf-life. Its film properties such as drying rate and hardness are equal to solvent borne resin systems. It also has impro...view more Maxemul™ 8201 is a reactive nonionic polymeric emulsifier that produces zero VOC resin emulsions with small particle size and good shelf-life. Its film properties such as drying rate and hardness are equal to solvent borne resin systems. It also has improved cycle time and excellent stability, covering a wide range of HLB values to match any formulation needs. view less | |
| Maxemul™ 9107 – A Versatile Emulsifier for VOC Free Epoxy Emulsions | Croda Coatings & Polymers | Maxemul™ 9107 is a non-ionic versatile polymeric surfactant to formulate VOC free solid, liquid and blended epoxy resin O/W emulsions. Emulsions based on Maxemul™ 9107 bring excellent tropical storage stability and there is no negative effect on dry film ...view more Maxemul™ 9107 is a non-ionic versatile polymeric surfactant to formulate VOC free solid, liquid and blended epoxy resin O/W emulsions. Emulsions based on Maxemul™ 9107 bring excellent tropical storage stability and there is no negative effect on dry film properties. Its versatility makes it suitable for floor coatings, wall paints and direct-to-metal applications. view less | |
| Multiwet™ BD - Multifunctional Wetting Agent | Croda Coatings & Polymers | Multiwet™ BD - Multifunctional wetting agent is a non-silicone and non-fluorinated multifunctional surfactant. Multiwet BD offers excellent wetting of clean, unprepared or low energy substrates and is best in class for biodegradability. | |
| Multiwet™ EF - Multifunctional Wetting Agent | Croda Coatings & Polymers | Multiwet™ EF - Multifunctional wetting agent is a non-silicone and non fluorinated multifunctional surfactant. Multiwet EF offers excellent wetting with a very low critical micelle concentration and is the best in class for efficiency. | |
| Multiwet™ SO - Multifunctional Wetting Agent | Croda Coatings & Polymers | Multiwet™ SO - Multifunctional wetting agent is a non-silicone and non fluorinated multifunctional surfactant. Multiwet SO offers excellent wetting with a low VOC content and is best in class at solids wetting. | |
| Multiwet™ SU - Multifunctional Wetting Agent | Croda Coatings & Polymers | Multiwet™ SU - Multifunctional wetting agent is a non-silicone and non fluorinated multifunctional surfactant. Multiwet SU offers excellent wetting especially of clean and low energy substrates and is best in class for substrate wetting. | |
| Multiwet™ VE - Multifunctional Wetting Agent | Croda Coatings & Polymers | Multiwet™ VE - Multifunctional wetting agent is a non-silicone and non fluorinated multifunctional surfactant. Multiwet VE offers excellent wetting of clean, unprepared and low energy surfaces and is best in class for versatility. | |
| Myrj™ S100 | Croda Coatings & Polymers | Myrj™ S100 is a solid O/W emulsifier. It is a highly efficient emulsifier with improved cycle time and excellent stability. It covers a wide range of HLB values to match your formulation needs. This product is used for decorative coating and paint applica...view more Myrj™ S100 is a solid O/W emulsifier. It is a highly efficient emulsifier with improved cycle time and excellent stability. It covers a wide range of HLB values to match your formulation needs. This product is used for decorative coating and paint applications. view less | |
| Myrj™ S40 | Croda Coatings & Polymers | Myrj™ S40 is a solid O/W emulsifier. It is a highly efficient emulsifier with improved cycle time and excellent stability. It covers a wide range of HLB values to match your formulation needs. This product is used for decorative coating and paint applicat...view more Myrj™ S40 is a solid O/W emulsifier. It is a highly efficient emulsifier with improved cycle time and excellent stability. It covers a wide range of HLB values to match your formulation needs. This product is used for decorative coating and paint applications. view less | |
| Myrj™ S8 | Croda Coatings & Polymers | Myrj™ S8 is a solid O/W emulsifier. It is a highly efficient emulsifier with improved cycle time and excellent stability. It covers a wide range of HLB values to match your formulation needs. This product is used for decorative coating and paint applicati...view more Myrj™ S8 is a solid O/W emulsifier. It is a highly efficient emulsifier with improved cycle time and excellent stability. It covers a wide range of HLB values to match your formulation needs. This product is used for decorative coating and paint applications. view less | |
| Pripol 1006 Dimer Acid Hydrogenated | Croda Coatings & Polymers | Pripol 1006 Dimer Acid Hydrogenated is a high purity hydrogenated dimer acid building block for epoxy, polyurethane, polyester and polyamide coatings and adhesives. It provides good colour, water repellency, flexibility, thermo-oxidative stability and exc...view more Pripol 1006 Dimer Acid Hydrogenated is a high purity hydrogenated dimer acid building block for epoxy, polyurethane, polyester and polyamide coatings and adhesives. It provides good colour, water repellency, flexibility, thermo-oxidative stability and excellent hydrolysis / chemical resistance. view less | |
| Pripol 1009 Dimer Acid Hydrogenated | Croda Coatings & Polymers | Pripol 1009 Dimer Acid Hydrogenated is a high purity hydrogenated dimer acid building block with high difunctionality for epoxy, polyurethane, polyester and polyamide coatings, adhesives and engineering plastics / elastomers. It provides water repellency,...view more Pripol 1009 Dimer Acid Hydrogenated is a high purity hydrogenated dimer acid building block with high difunctionality for epoxy, polyurethane, polyester and polyamide coatings, adhesives and engineering plastics / elastomers. It provides water repellency, flexibility, thermo-oxidative stability and excellent hydrolysis / chemical resistance. view less | |
| Pycal® 94 | Croda Coatings & Polymers | Pycal® 94 is a plasticizer for emulsion adhesives. It has a number of characteristics which make it unique among polyvinyl acetate plasticizers. It has a thickening effect on polyvinyl acetate emulsions, thus reducing or eliminating the need for other thi...view more Pycal® 94 is a plasticizer for emulsion adhesives. It has a number of characteristics which make it unique among polyvinyl acetate plasticizers. It has a thickening effect on polyvinyl acetate emulsions, thus reducing or eliminating the need for other thickening agents. view less | |
| Span™ 20 | Croda Coatings & Polymers | Span™ 20 is a W/O emulsifier, O/W co-emulsifier, pigment dispersant, and carrier liquid. It has particle morphology control in S-PVC. As a highly efficient emulsifier, it has improved cycle time and excellent stability, covering a wide range of HLB values...view more Span™ 20 is a W/O emulsifier, O/W co-emulsifier, pigment dispersant, and carrier liquid. It has particle morphology control in S-PVC. As a highly efficient emulsifier, it has improved cycle time and excellent stability, covering a wide range of HLB values to match your formulation needs. It also is a multifunctional non-silicone and non-fluorinated wetting agent with excellent environmental profiles. view less | |
| Span™ 40 | Croda Coatings & Polymers | Span™ 40 is a W/O emulsifier and O/W co-emulsifier, pigment dispersant and carrier liquid. It is a highly efficient emulsifier with improved cycle time and excellent stability, covering a wide range of HLB values to match your formulation needs. | |
| Span™ 60 | Croda Coatings & Polymers | Span™ 60 is a W/O emulsifier and O/W co-emulsifier, pigment dispersant in non-polar liquids. It is a highly efficient emulsifier with improved cycle time and excellent stability, covering a wide range of HLB values to match your formulation needs. | |
| Span™ 85 | Croda Coatings & Polymers | Span™ 85 is an easy to handle W/O emulsifier and dispersing agent for a-polar liquids. It is a primary emulsifier for inverse emulsion polymerisation with improved cycle time and excellent stability, covering a wide range of HLB values to match your formu...view more Span™ 85 is an easy to handle W/O emulsifier and dispersing agent for a-polar liquids. It is a primary emulsifier for inverse emulsion polymerisation with improved cycle time and excellent stability, covering a wide range of HLB values to match your formulation needs. It is also used as a formulation enhancer for a broad selection of specialty surfactants (non APE, non/low VOC, HAPS free) to solve challenges in aqueous and non-aqueous formulations. view less | |
| Special-Primer AP 1010 | Worlée-Chemie G.m.b.H. | Special-Primer AP 1010 is a special adhesion promoter for thermoplastic elastomers, EPDM rubber, as well as for untreated polypropylene. It is compatible with alcohol and can be used in aerosol cans. This grade has a non-volatile content of 4.0% ± 0.3, an...view more Special-Primer AP 1010 is a special adhesion promoter for thermoplastic elastomers, EPDM rubber, as well as for untreated polypropylene. It is compatible with alcohol and can be used in aerosol cans. This grade has a non-volatile content of 4.0% ± 0.3, and it appears as a milky, low viscous liquid. view less | |
| Special-Primer AP 1030 | Worlée-Chemie G.m.b.H. | Special-Primer AP 1030 is an adhesion promoter for thermoplastic elastomers, EPDM rubber, and untreated polyolefins. This grade has a non-volatile content of 4.0% ± 0.3, and it appears as a milky, low viscous liquid. Special-Primer AP 1030 is widely used ...view more Special-Primer AP 1030 is an adhesion promoter for thermoplastic elastomers, EPDM rubber, and untreated polyolefins. This grade has a non-volatile content of 4.0% ± 0.3, and it appears as a milky, low viscous liquid. Special-Primer AP 1030 is widely used to solve adhesion problems to flexible substrates like thermoplastic elastomers, thermoplastic polyurethane and EPDM (e.g. "Vistalon" from Exxon, "Nordel" from DuPont). After coating with a thin film of Special-Primer AP 1030, these flexible substrates can be painted, printed, glued or labelled. Special-Primer AP 1030 is tinted white for black substrates. view less | |
| Special-Primer PE 6800 | Worlée-Chemie G.m.b.H. | Special-Primer PE 6800 is an adhesion promoter developed especially for polyethylene. This grade has a non-volatile content of 5.0% ± 0.3. After treatment with PE 6800, polyethylene can be painted, printed, glued or labelled like any other substrate. Spec...view more Special-Primer PE 6800 is an adhesion promoter developed especially for polyethylene. This grade has a non-volatile content of 5.0% ± 0.3. After treatment with PE 6800, polyethylene can be painted, printed, glued or labelled like any other substrate. Special Primer PE 6800 is suitable as an adhesion promoter for polyethylene of high, medium and low density (lowdensity-polyethylene). This product appears as a yellowish to brown, low viscous liquid. view less | |
| Special-Primer PP 3200 W | Worlée-Chemie G.m.b.H. | Special-Primer PP 3200 W is an aqueous primer and adhesion promoter developed to solve adhesion problems with critical substrates like polyolefinic plastics and blends. This grade has a non-volatile content of 30% ± 1.5. It appears as a low viscous, brown...view more Special-Primer PP 3200 W is an aqueous primer and adhesion promoter developed to solve adhesion problems with critical substrates like polyolefinic plastics and blends. This grade has a non-volatile content of 30% ± 1.5. It appears as a low viscous, brownish turbid liquid. Special-Primer PP 3200 W can be used as adhesion promoter by incorporation in adhesives, inks and paints in case of sufficient compatibility or diluted down to 10% solid content as primer. view less | |
| Special-Primer PP 5130 (2.5% I Xylene) | Worlée-Chemie G.m.b.H. | Special-Primer PP 5130 (2.5% I Xylene) is an adhesion promoter developed especially for polypropylene. This grade has a non-volatile content of 2.5% ± 0.3. Special-Primer PP 5130 is suitable to solve adhesion problems with untreated or with talc filled po...view more Special-Primer PP 5130 (2.5% I Xylene) is an adhesion promoter developed especially for polypropylene. This grade has a non-volatile content of 2.5% ± 0.3. Special-Primer PP 5130 is suitable to solve adhesion problems with untreated or with talc filled polypropylene. After treatment with PP 5130 the polypropylene can be painted, printed, glued or labelled like any other substrate. view less | |
| Special-Primer PP 5130 (5% In Xylene) | Worlée-Chemie G.m.b.H. | Special-Primer PP 5130 (5% In Xylene) is an adhesion promoter developed especially for polypropylene. This grade has a non-volatile content of 5.0% ± 0.3 and is delivered in 5% xylene. Special-Primer PP 5130 is compatible with low viscosity grades of chlo...view more Special-Primer PP 5130 (5% In Xylene) is an adhesion promoter developed especially for polypropylene. This grade has a non-volatile content of 5.0% ± 0.3 and is delivered in 5% xylene. Special-Primer PP 5130 is compatible with low viscosity grades of chlorinated rubber and some vinyl copolymer resins. It is only soluble in aromatics and chlorinated hydrocarbons. There is limited solubility in aliphatic hydrocarbons. Special-Primer PP 5130 is suitable to solve adhesion problems with untreated or with talc filled polypropylene. After treatment with PP 5130 the polypropylene can be painted, printed, glued or labelled like any other substrate. view less | |
| Special-Primer PP 7550 | Worlée-Chemie G.m.b.H. | Special-Primer PP 7550 is an adhesion promoter mainly for untreated polypropylene. It may also improve the adhesion on other plastics or different substrates. This grade has a non-volatile content of 5.0% ± 0.3. Special-Primer PP 7550 is only soluble in a...view more Special-Primer PP 7550 is an adhesion promoter mainly for untreated polypropylene. It may also improve the adhesion on other plastics or different substrates. This grade has a non-volatile content of 5.0% ± 0.3. Special-Primer PP 7550 is only soluble in aromatics and chlorinated hydrocarbons. It is possible to blend with other solvents like esters, ketones etc.. This product appears as a yellowish, low viscous liquid. view less | |
| Special-Primer PP 7560 | Worlée-Chemie G.m.b.H. | Special-Primer PP 7560 is an adhesion promoter mainly for untreated polypropylene. It may also improve the adhesion on other plastics or different substrates. This grade has a non-volatile content of 10.0% ± 0.5. In most cases the adhesion promotion of Sp...view more Special-Primer PP 7560 is an adhesion promoter mainly for untreated polypropylene. It may also improve the adhesion on other plastics or different substrates. This grade has a non-volatile content of 10.0% ± 0.5. In most cases the adhesion promotion of Special-Primer PP 7560 is superior to Special-Primer PP 5130. This product appears as a yellowish, low viscous liquid. view less | |
| Synperonic™ 13/12 | Croda Coatings & Polymers | Synperonic™ 13/12 is a nonionic surfactant with good pigment wetting and emulsifying properties. It is a highly efficient emulsifier with improved cycle time and excellent stability, covering a wide range of HLB values to match your formulation needs. | |
| Synperonic™ 13/6 | Croda Coatings & Polymers | Synperonic™ 13/6 is a nonionic surfactant with good wetting properties. It is a highly efficient emulsifier with improved cycle time and excellent stability, covering a wide range of HLB values to match your formulation needs. It is also a multifunctional...view more Synperonic™ 13/6 is a nonionic surfactant with good wetting properties. It is a highly efficient emulsifier with improved cycle time and excellent stability, covering a wide range of HLB values to match your formulation needs. It is also a multifunctional non-silicone and non-fluorinated wetting agent with excellent environmental profiles. view less | |
| Synperonic™ T/1301 | Croda Coatings & Polymers | Synperonic™ T/1301 is an effective defoamer as well as a polyether polyol building block with enhanced reactivity. It is an effective dispersant for solid particles in water or lower alcohols. It is also a highly efficient emulsifier with improved cycle t...view more Synperonic™ T/1301 is an effective defoamer as well as a polyether polyol building block with enhanced reactivity. It is an effective dispersant for solid particles in water or lower alcohols. It is also a highly efficient emulsifier with improved cycle time and excellent stability, covering a wide range of HLB values to match your formulation needs. view less | |
| Synperonic™ T/908 | Croda Coatings & Polymers | Synperonic™ T/908 is an excellent cross-linker for hydrophilic PU systems. It is an effective dispersant for solid particles in water or lower alcohols. It is also a highly efficient emulsifier with improved cycle time and excellent stability, covering a ...view more Synperonic™ T/908 is an excellent cross-linker for hydrophilic PU systems. It is an effective dispersant for solid particles in water or lower alcohols. It is also a highly efficient emulsifier with improved cycle time and excellent stability, covering a wide range of HLB values to match your formulation needs. view less | |
| Tween™ 21 | Croda Coatings & Polymers | Tween™ 21 is versatile for multiple applications. It can be used as a multifunctional non-silicone and non-fluorinated wetting agent with excellent environmental profiles. It is also a highly efficient emulsifier with improved cycle time and excellent sta...view more Tween™ 21 is versatile for multiple applications. It can be used as a multifunctional non-silicone and non-fluorinated wetting agent with excellent environmental profiles. It is also a highly efficient emulsifier with improved cycle time and excellent stability, covering a wide range of HLB values to match your formulation needs. It is also used as a formulation enhancer for a broad selection of specialty surfactants (non APE, non/low VOC, HAPS free) to solve challenges in aqueous and non-aqueous formulations. view less | |
| Tween™ 40 | Croda Coatings & Polymers | Tween™ 40 is versatile for multiple applications. It can be used as a multifunctional non-silicone and non-fluorinated wetting agent with excellent environmental profiles. It is also a highly efficient emulsifier with improved cycle time and excellent sta...view more Tween™ 40 is versatile for multiple applications. It can be used as a multifunctional non-silicone and non-fluorinated wetting agent with excellent environmental profiles. It is also a highly efficient emulsifier with improved cycle time and excellent stability, covering a wide range of HLB values to match your formulation needs. It is also used as a formulation enhancer for a broad selection of specialty surfactants (non APE, non/low VOC, HAPS free) to solve challenges in aqueous and non-aqueous formulations. view less | |
| WorléeAdd 311 (10% In Xylene) | Worlée-Chemie G.m.b.H. | WorléeAdd 311 (10% In Xylene) is a silicone based paint, lacquer, and leather finish additive. It improves mar-resistance and slip as well as reducing orange peel. W´Add 311 is an all purpose additive, effective in a wide variety of solvent-based systems ...view more WorléeAdd 311 (10% In Xylene) is a silicone based paint, lacquer, and leather finish additive. It improves mar-resistance and slip as well as reducing orange peel. W´Add 311 is an all purpose additive, effective in a wide variety of solvent-based systems including NC- and acid curing wood lacquers, yacht varnishes, parquet lacquers, paper coatings and leather finishes. W´Add 311 imparts mar-resistance to paint and lacquer surface, gives a smooth satin feel to the surface, improves flow-out, reduces orange-peel and Benard's cell effect. view less | |
| WorléeAdd 311 (30% In Xylene) | Worlée-Chemie G.m.b.H. | WorléeAdd 311 (30% In Xylene) is a silicone based paint, lacquer, and leather finish additive. It increases the resistance of solvent based paints against mechanical damages by increasing surface smoothness. At the same time the flow is improved and surfa...view more WorléeAdd 311 (30% In Xylene) is a silicone based paint, lacquer, and leather finish additive. It increases the resistance of solvent based paints against mechanical damages by increasing surface smoothness. At the same time the flow is improved and surface imperfections like Benard's cells, brush marks etc. are avoided. Typical application fields are air drying alkyd resin paints for decorative, DIY and industrial application. view less | |
| WorléeAdd 312 | Worlée-Chemie G.m.b.H. | WorléeAdd 312 is a water soluble silicone paint additive, which is effective at low concentrations in improving substrate wetting, mar resistance and slip, flow out, gloss and levelling and reducing orange peel and cratering. W´Add 315 is designed to incr...view more WorléeAdd 312 is a water soluble silicone paint additive, which is effective at low concentrations in improving substrate wetting, mar resistance and slip, flow out, gloss and levelling and reducing orange peel and cratering. W´Add 315 is designed to increase the mar resistance of water and solvent based air drying and stoving paint films by reducing surface tension of the coating and imparting a high degree of slip and improving flow out. view less | |
| WorléeAdd 315 | Worlée-Chemie G.m.b.H. | WorléeAdd 315 is a water soluble silicone paint additive, which is effective at low concentrations in improving substrate wetting, mar resistance and slip, flowout, gloss and levelling, and reducing orange peel and cratering. This product appears as a cle...view more WorléeAdd 315 is a water soluble silicone paint additive, which is effective at low concentrations in improving substrate wetting, mar resistance and slip, flowout, gloss and levelling, and reducing orange peel and cratering. This product appears as a clear to slightly yellow liquid. view less | |
| WorléeAdd 327 | Worlée-Chemie G.m.b.H. | WorléeAdd 327 is a silicone based paint additive mainly for solvent based and also water thinnable air drying and stoving coatings. W´Add 327 can be added to the ready paints or lacquers, typical concentration range from 0.1 - 1.5% (calculated on total fo...view more WorléeAdd 327 is a silicone based paint additive mainly for solvent based and also water thinnable air drying and stoving coatings. W´Add 327 can be added to the ready paints or lacquers, typical concentration range from 0.1 - 1.5% (calculated on total formulation). view less | |
| WorléeAdd 330 | Worlée-Chemie G.m.b.H. | WorléeAdd 330 is a silicone based paint additive mainly for water thinnable systems to eliminate surface imperfections and to improve wetting properties. W´Add 330 is a special additive for reducing the surface tension. The use of W´Add 333 is recommended...view more WorléeAdd 330 is a silicone based paint additive mainly for water thinnable systems to eliminate surface imperfections and to improve wetting properties. W´Add 330 is a special additive for reducing the surface tension. The use of W´Add 333 is recommended when in water thinnable materials an additional butyl glycol content is undesirable. view less | |
| WorléeAdd 345 | Worlée-Chemie G.m.b.H. | WorléeAdd 345 is a special additive for improving the substrate wetting of aqueous systems. It is based on dioctylsulfosuccinate and a silicone copolyether. Typical applications are coatings on wood, printing inks, care products etc.. This product appears...view more WorléeAdd 345 is a special additive for improving the substrate wetting of aqueous systems. It is based on dioctylsulfosuccinate and a silicone copolyether. Typical applications are coatings on wood, printing inks, care products etc.. This product appears as a clear to slightly turbid yellowish liquid. view less | |
| WorléeAdd 351 | Worlée-Chemie G.m.b.H. | WorléeAdd 351 is a high molecular silicone additive for improving the surface properties of water thinnable paints and printing inks. W´Add 351 improves scratch resistance and surface smoothness of water thinnable paints and printing inks as well as silk ...view more WorléeAdd 351 is a high molecular silicone additive for improving the surface properties of water thinnable paints and printing inks. W´Add 351 improves scratch resistance and surface smoothness of water thinnable paints and printing inks as well as silk gloss to glossy latex paints. This product can also be used for paints and printing inks based on alcohols. view less | |
| WorléeAdd 352 | Worlée-Chemie G.m.b.H. | WorléeAdd 352 is a high molecular silicone additive for the improvement of surface properties of water thinnable lacquers and printing inks. It appears as a turbid, creamy, still-flowing substance. W´Add 352 improves scratch resistance of water thinnable ...view more WorléeAdd 352 is a high molecular silicone additive for the improvement of surface properties of water thinnable lacquers and printing inks. It appears as a turbid, creamy, still-flowing substance. W´Add 352 improves scratch resistance of water thinnable lacquers and printing inks as well as satin glossy up to glossy latex prints. W´Add 352 can be used for alcohol based lacquers and printing inks. view less | |
| WorléeAdd 356 | Worlée-Chemie G.m.b.H. | WorléeAdd 356 is a modified silicone solution used to improve the characteristics of solvent based paints, printing inks, and all kinds of wood and paper lacquers. It is also applied by curtain-coating. It is also recommended for decorative paints, stovin...view more WorléeAdd 356 is a modified silicone solution used to improve the characteristics of solvent based paints, printing inks, and all kinds of wood and paper lacquers. It is also applied by curtain-coating. It is also recommended for decorative paints, stoving enamels and metallic car paints. W´Add 356 is thermostable. view less | |
| WorléeAdd 371 | Worlée-Chemie G.m.b.H. | WorléeAdd 371 is a silicone based, highly effective antifoam and deairing additive for solvent based paints and inks of different compositions. W´Add 371 prevents foam and air bubbles at the production and application of solvent based and high solids coat...view more WorléeAdd 371 is a silicone based, highly effective antifoam and deairing additive for solvent based paints and inks of different compositions. W´Add 371 prevents foam and air bubbles at the production and application of solvent based and high solids coating systems and printing inks. It is especially recommended in thixotropic PUR systems. view less | |
| WorléeAdd 372 | Worlée-Chemie G.m.b.H. | WorléeAdd 372 is a silicone based antifoam and deairing additive for solvent based paints and inks of different compositions. W´Add 372 is also very well suited for high solids. W´Add 372 is very effective at concentrations of 0.05 - 0.80% and can be adde...view more WorléeAdd 372 is a silicone based antifoam and deairing additive for solvent based paints and inks of different compositions. W´Add 372 is also very well suited for high solids. W´Add 372 is very effective at concentrations of 0.05 - 0.80% and can be added at any process stage during manufacture. If lower concentration is desired, it may be diluted with ketone or ester solvents. view less | |
| WorléeAdd 373 N | Worlée-Chemie G.m.b.H. | WorléeAdd 373 N is a silicone containing additive with multifunctional properties. It is used in solvent based coatings mainly to achieve surface smoothness and mar resistance. At the same time W´Add 373 N works as antifoam agent and avoids surface imperf...view more WorléeAdd 373 N is a silicone containing additive with multifunctional properties. It is used in solvent based coatings mainly to achieve surface smoothness and mar resistance. At the same time W´Add 373 N works as antifoam agent and avoids surface imperfections. This product appears as a clourless, low viscous liquid. view less | |
| WorléeAdd 412 | Worlée-Chemie G.m.b.H. | WorléeAdd 412 is a solvent free compatibility agent based on a modified copolymer for easier incorporation of driers into water-borne alkyd paints. It improves the compatibility of driers with alkyd resin emulsions and makes the equal distribution in the ...view more WorléeAdd 412 is a solvent free compatibility agent based on a modified copolymer for easier incorporation of driers into water-borne alkyd paints. It improves the compatibility of driers with alkyd resin emulsions and makes the equal distribution in the system easier. By this, precipitation can be avoided. view less | |
| WorléeAdd 422 | Worlée-Chemie G.m.b.H. | WorléeAdd 422 is a quarternary ammonia salt solution for reducing the electrical resistance of solvent based systems. W´Add 422 does not cause any drying deceleration and has no negative influence on the protection against corrosion. This product is solu...view more WorléeAdd 422 is a quarternary ammonia salt solution for reducing the electrical resistance of solvent based systems. W´Add 422 does not cause any drying deceleration and has no negative influence on the protection against corrosion. This product is soluble in water, alcohols and ketones. It is partially soluble in aliphatic and aromatic hydrocarbons and esters. view less | |
| WorléeAdd 428 | Worlée-Chemie G.m.b.H. | WorléeAdd 428 is a silicone free additive for the manufacture of structured coil coatings. The formation of the orange peel effect is achieved only by adding W´Add 428. No wax addition is necessary. The structure is achieved by adding W´Add 428 to the coi...view more WorléeAdd 428 is a silicone free additive for the manufacture of structured coil coatings. The formation of the orange peel effect is achieved only by adding W´Add 428. No wax addition is necessary. The structure is achieved by adding W´Add 428 to the coil coating primer. Minimum film thickness should be 15 µ. view less | |
| WorléeAdd 456 | Worlée-Chemie G.m.b.H. | WorléeAdd 456 is a nitrite-free organic corrosion inhibitor for aqueous lacquers. W´Add 456 is used in aqueous systems as an anti flash rust agent as well as for improving long term corrosion resistance. Application fields are acrylic dispersions, alkyd e...view more WorléeAdd 456 is a nitrite-free organic corrosion inhibitor for aqueous lacquers. W´Add 456 is used in aqueous systems as an anti flash rust agent as well as for improving long term corrosion resistance. Application fields are acrylic dispersions, alkyd emulsion, one-component and two-component PU systems. This product appears as a colourless to slightly yellowish liquid. view less | |
| WorléeAdd 480 N | Worlée-Chemie G.m.b.H. | WorléeAdd 480 N is a special epoxy ester to improve the adhesion of aqueous baking enamels and polyurethane systems on metallic substrates. It improves the adhesion on metal, e. g. steel, zinc coating, aluminium, tin plate and also on glass. Preferred app...view more WorléeAdd 480 N is a special epoxy ester to improve the adhesion of aqueous baking enamels and polyurethane systems on metallic substrates. It improves the adhesion on metal, e. g. steel, zinc coating, aluminium, tin plate and also on glass. Preferred application fields are aqueous baking enamels for example on basis polyester, alkyd or acrylate in combination with amino resin or blocked polyisocyanate as well as air and oven drying two component polyurethane systems. W´Add 480 N is incorporated in the lacquer by thoroughly stirring. The optimal addition quantity empirically is 1.0 - 5.0% calculated on total formulation and should be determined by a serial trial. view less | |
| WorléeAdd 486 | Worlée-Chemie G.m.b.H. | WorléeAdd 486 is a special polyester resin used to improve the adhesion of solvent based stoving and 2 component PUR systems. The addition of W´Add 486 improves the adhesion on different substrates, like metals, melamine resin coated chipboards, etc. Also...view more WorléeAdd 486 is a special polyester resin used to improve the adhesion of solvent based stoving and 2 component PUR systems. The addition of W´Add 486 improves the adhesion on different substrates, like metals, melamine resin coated chipboards, etc. Also the elasticity of paint systems can be improved by W´Add 486. view less | |
| WorléeAdd 487 | Worlée-Chemie G.m.b.H. | WorléeAdd 487 is a special polyester resin used to improve the adhesion of solvent-based air drying, stoving and 2 component PUR-systems. The addition of W ́Add 487 improves the adhesion on different substrates like metals, melamine resin coated chipboard...view more WorléeAdd 487 is a special polyester resin used to improve the adhesion of solvent-based air drying, stoving and 2 component PUR-systems. The addition of W ́Add 487 improves the adhesion on different substrates like metals, melamine resin coated chipboards, etc. It can also improve the elasticity of paint systems. This product appears as a colourless, light yellow liquid. view less | |
| WorléeAdd 602 | Worlée-Chemie G.m.b.H. | WorléeAdd 602 is an antifoam agent and defoamer mainly for 2 compound PUR and epoxy resin coatings. W´Add 602 should be added to the binder during production before the addition of other additives. | |
| WorléeAdd 603 | Worlée-Chemie G.m.b.H. | WorléeAdd 603 is a polyacrylate modified silicone defoamer for the use in solvent based and solvent free coatings of different compositions. W´Add 603 can be used as antifoam agent and defoamer in very different systems. The well-balanced composition impr...view more WorléeAdd 603 is a polyacrylate modified silicone defoamer for the use in solvent based and solvent free coatings of different compositions. W´Add 603 can be used as antifoam agent and defoamer in very different systems. The well-balanced composition improves normal substrate wetting as well as flow at the same time. The active ingredients correspond to FDA-§ 175.300. Application fields are can coatings, airdrying industrial coatings, wood and furniture coatings, solvent free UV-systems as well as EP-coatings. view less | |
| WorléeAdd 604 N | Worlée-Chemie G.m.b.H. | WorléeAdd 604 N is a silicone containing defoamer and antifoam additive especially for water thinnable wood and parquet lacquers based on acrylic emulsions and/or PUR emulsions. It shows good effectiveness on all surfaces and good compatibility with vario...view more WorléeAdd 604 N is a silicone containing defoamer and antifoam additive especially for water thinnable wood and parquet lacquers based on acrylic emulsions and/or PUR emulsions. It shows good effectiveness on all surfaces and good compatibility with various emulsion polymers. The product can be directly dispersed into aqueous systems and can be used in basic as well as in acidic lacquers. Sufficient shear forces should be used. view less | |
| WorléeAdd 677 | Worlée-Chemie G.m.b.H. | WorléeAdd 677 is a silicone-free and aromatic-free defoamer and anti-foam agent for solvent based and solvent free systems. Typical application fields are wood lacquers (NC, 2 component-PU, acid hardening, incl. curtain coatings), decorative and house pai...view more WorléeAdd 677 is a silicone-free and aromatic-free defoamer and anti-foam agent for solvent based and solvent free systems. Typical application fields are wood lacquers (NC, 2 component-PU, acid hardening, incl. curtain coatings), decorative and house paints, 2 component-EP-systems, industrial coatings, printing inks etc..This product appears as a clear, slightly yellowish liquid. view less | |
| WorléeAdd 678 | Worlée-Chemie G.m.b.H. | WorléeAdd 678 is a silicone free defoamer and anti-foam agent for solvent based and solvent free systems. W´Add 678 is mainly used to avoid foam and as defoaming agent in one- and two component PUR paints and coatings. This product is a clear, low viscous...view more WorléeAdd 678 is a silicone free defoamer and anti-foam agent for solvent based and solvent free systems. W´Add 678 is mainly used to avoid foam and as defoaming agent in one- and two component PUR paints and coatings. This product is a clear, low viscous liquid. view less | |
| WorléeAdd 781 | Worlée-Chemie G.m.b.H. | WorléeAdd 781 is a silicone free leveling additive. It may be used in solved based systems such as isocyanate- and amino resin cross linking top coats to improve the levelling. In two-pack-PU-systems the addition of W´Add 781 enables the application of hi...view more WorléeAdd 781 is a silicone free leveling additive. It may be used in solved based systems such as isocyanate- and amino resin cross linking top coats to improve the levelling. In two-pack-PU-systems the addition of W´Add 781 enables the application of high film thickness with reduced blister building. view less | |
| WorléeCryl® A 1218 | Worlée-Chemie G.m.b.H. | WorléeCryl® A 1218 is an acrylic resin which can be crosslinked with polyisocyanates. It has high reactivity and long pot life. This product is designed for fast drying wood and furniture lacquers. It is also CAB compatible. | |
| WorléeCryl® A 1320 | Worlée-Chemie G.m.b.H. | WorléeCryl® A 1320 is an acrylic resin which can be crosslinked with polyisocyanate. It is used for high quality wood and furniture lacquers. This product exhibits good initial drying. Also, in top coats a brilliant haze-free gloss will be provided. | |
| WorléeCryl® A 2210 60% In Aromatic HC 155-180 | Worlée-Chemie G.m.b.H. | WorléeCryl® A 2210 60% In Aromatic HC 155-180 is a styrene acrylic resin for the production of physically drying primers. This grade has a non-volatile content of 60% ± 1. It is not compatible with other binding agents e. g. alkyd resins. W´Cryl A 2210 is...view more WorléeCryl® A 2210 60% In Aromatic HC 155-180 is a styrene acrylic resin for the production of physically drying primers. This grade has a non-volatile content of 60% ± 1. It is not compatible with other binding agents e. g. alkyd resins. W´Cryl A 2210 is particularly suitable for the manufacture of fast drying primers. view less | |
| WorléeCryl® A 2218 | Worlée-Chemie G.m.b.H. | WorléeCryl® A 2218 is a styrene acrylic resin which can be crosslinked with polyisocyanates. It is preferred for the formulation of very fast drying primers, fillers, and top coats for steel and plastics. This grade has a non-volatile content of 50% ± 1. | |
| WorléeCryl® A 2445 (60% In Xylene/Solvesso 100/Butyl Acetate 2:1:1) | Worlée-Chemie G.m.b.H. | WorléeCryl® A 2445 (60% In Xylene/Solvesso 100/Butyl Acetate 2:1:1) is an acrylic resin which can be crosslinked with polyisocyanates. This grade has a non-volatile content of 60% ± 1. W´Cryl A 2445 is a hydroxyfunctional acrylic-copolymer for the manufac...view more WorléeCryl® A 2445 (60% In Xylene/Solvesso 100/Butyl Acetate 2:1:1) is an acrylic resin which can be crosslinked with polyisocyanates. This grade has a non-volatile content of 60% ± 1. W´Cryl A 2445 is a hydroxyfunctional acrylic-copolymer for the manufacture of high quality 2 component top coats. Paints based on W´Cryl A 2445 show excellent resistances against weather and chemicals. view less | |
| WorléeProtect 1507 | Worlée-Chemie G.m.b.H. | WorléeProtect 1507 is a functional coating material for technical applications. The film of W´Protect 1507 exhibits high scratch resistance, low tendency for soiling and easy-to-clean / anti graffiti-effect. Dry film thickness normally is between 1 and ma...view more WorléeProtect 1507 is a functional coating material for technical applications. The film of W´Protect 1507 exhibits high scratch resistance, low tendency for soiling and easy-to-clean / anti graffiti-effect. Dry film thickness normally is between 1 and max. 10 μm. Application occurs by common coating processes as e. g. spraying, dipping, floating or wiping. The inorganic-organic hybrid coating exhibits good adhesion on different substrates and can be air- and forced dried. The high gloss transparent films show high chemical resistance and are yellowing and chalk resistant. view less | |
| Zephrym™ 3300-B | Croda Coatings & Polymers | Zephrym™ 3300-B is a liquid, anionic, polymeric pigment dispersant for enhanced color development. It is low VOC and provides excellent color development and improved dispersion stability both for aqueous and non-aqueous applications. This product is well...view more Zephrym™ 3300-B is a liquid, anionic, polymeric pigment dispersant for enhanced color development. It is low VOC and provides excellent color development and improved dispersion stability both for aqueous and non-aqueous applications. This product is well suited for both organic and inorganic pigments and fillers. view less | |
| Zephrym™ ColorFX Carbon Black Pigment Dispersant | Croda Coatings & Polymers | Zephrym™ ColorFX Carbon Black Pigment Dispersant is a novel amine functional dispersant for high performance pigments, such as carbon black, in solvent borne formulations. Zephrym™ ColorFX offers enhanced color development - no synergist needed -, signifi...view more Zephrym™ ColorFX Carbon Black Pigment Dispersant is a novel amine functional dispersant for high performance pigments, such as carbon black, in solvent borne formulations. Zephrym™ ColorFX offers enhanced color development - no synergist needed -, significantly lowers usage levels, lower viscosity and improved stability. view less | |
| Zephrym™ PD 2206 | Croda Coatings & Polymers | Zephrym™ PD 2206 is a liquid, nonionic, polymeric pigment dispersant for enhanced color development. It is low VOC and provides excellent color development and improved dispersion stability both for aqueous and non-aqueous applications. It has enhanced di...view more Zephrym™ PD 2206 is a liquid, nonionic, polymeric pigment dispersant for enhanced color development. It is low VOC and provides excellent color development and improved dispersion stability both for aqueous and non-aqueous applications. It has enhanced dispersion of particles in low polarity solvent and resin systems. This product is well suited for both organic and inorganic pigments and fillers, as well as carbon black. It is FDA indirect food contact approved and provides excellent performance in liquid color for plastics. view less | |
| Zephrym™ PD 2234 | Croda Coatings & Polymers | Zephrym™ PD 2234 is a liquid, nonionic, polymeric pigment dispersant for enhanced color development. It is low VOC and provides excellent color development and improved dispersion stability both for aqueous and non-aqueous applications. It also has improv...view more Zephrym™ PD 2234 is a liquid, nonionic, polymeric pigment dispersant for enhanced color development. It is low VOC and provides excellent color development and improved dispersion stability both for aqueous and non-aqueous applications. It also has improved dispersion viscosity, longer storage capability, and superior color development in low polarity non-aqueous systems. It is particularly well suited for both organic and inorganic pigments. view less | |
| Zephrym™ PD 2246 | Croda Coatings & Polymers | Zephrym™ PD 2246 is a solid, nonionic, polymeric pigment dispersant for enhanced color development. It is low VOC and provides excellent color development and improved dispersion stability both for aqueous and non-aqueous applications. It also has improve...view more Zephrym™ PD 2246 is a solid, nonionic, polymeric pigment dispersant for enhanced color development. It is low VOC and provides excellent color development and improved dispersion stability both for aqueous and non-aqueous applications. It also has improved dispersion of particles in low polarity non-aqueous systems. It is well suited for both organic and inorganic pigments and fillers, as well as carbon black. This product has very good high temperature and high shear stability. view less | |
| Zephrym™ PD 3315 | Croda Coatings & Polymers | Zephrym™ PD 3315 is a liquid, anionic, polymeric pigment dispersant for enhanced color development. It is low VOC and provides excellent color development and improved dispersion stability both for aqueous and non-aqueous applications. It is capable of wi...view more Zephrym™ PD 3315 is a liquid, anionic, polymeric pigment dispersant for enhanced color development. It is low VOC and provides excellent color development and improved dispersion stability both for aqueous and non-aqueous applications. It is capable of withstanding high ion concentrations. view less | |
| Zephrym™ PD 4913 | Croda Coatings & Polymers | Zephrym™ PD 4913 is a liquid, nonionic, polymeric pigment dispersant for enhanced color development. It is low VOC and provides excellent color development and improved dispersion stability both for aqueous and non-aqueous applications. It has superior di...view more Zephrym™ PD 4913 is a liquid, nonionic, polymeric pigment dispersant for enhanced color development. It is low VOC and provides excellent color development and improved dispersion stability both for aqueous and non-aqueous applications. It has superior dispersion capabilities for organic pigments, as well as inorganic pigments and fillers in aqueous environments. It produces high quality dispersions using untreated pigments. view less | |
| Zephrym™ PD 4974 Iron Oxide Pigment Dispersant | Croda Coatings & Polymers | Zephrym™ PD 4974 Iron Oxide Pigment Dispersant is a low VOC polymeric dispersant specifically designed for iron oxide pigments. It dramatically improves stability, enhances color development and reduces the need for thickeners. | |
| Zephrym™ PD 7000 | Croda Coatings & Polymers | Zephrym™ PD 7000 is a liquid, cationic, polymeric pigment dispersant for enhanced color development. It is a versatile polymeric dispersant that can be used in aqueous and high polarity solvent or resin systems. This product is particularly suited for dis...view more Zephrym™ PD 7000 is a liquid, cationic, polymeric pigment dispersant for enhanced color development. It is a versatile polymeric dispersant that can be used in aqueous and high polarity solvent or resin systems. This product is particularly suited for dispersion of carbon black, inorganic pigments and fillers, and for use in electronics and adhesives applications. view less |
