| Airase® 5355 Defoamer | Evonik Operations GmbH, BL Coating Additives | Airase® 5355 Defoamer is a relatively strong proprietary siloxane based defoamer designed to control and quickly eliminate foam without generating surface defects in waterbased pigment grinds, inks, overprint varnishes, adhesives and coatings. It does not...view more Airase® 5355 Defoamer is a relatively strong proprietary siloxane based defoamer designed to control and quickly eliminate foam without generating surface defects in waterbased pigment grinds, inks, overprint varnishes, adhesives and coatings. It does not contain added mineral oils, hazardous air pollutants (HAPs) or alkyl phenol ethoxylates (APEs). Airase® 5355 Defoamer is especially suited for waterbased applications requiring broad food contact compliances. view less | Request Sample |
| Airase® 8070 Deaerator | Evonik Operations GmbH, BL Coating Additives | Airase® 8070 Deaerator is a proprietary, formulated, modified-siloxane deaerator designed to eliminate foam, pinholing, and solvent-popping problems in water-based coatings applied by airless (or air-assisted) spray technologies without generating surface...view more Airase® 8070 Deaerator is a proprietary, formulated, modified-siloxane deaerator designed to eliminate foam, pinholing, and solvent-popping problems in water-based coatings applied by airless (or air-assisted) spray technologies without generating surface defects. Airase® 8070 Deaerator can be especially effective against microfoam because it is designed to leave a defect-free surface, even when thick layers are applied or highly vicous coatings are sprayed. Airase® 8070 Deaerator contains no chemicals that are considered VOCs per the European Solvent Directive or the European Decorative Paint Directive; it contributes no VOCs nder EPA Method 24 testing conditions when evaluated at typical used levels (1% by weight) in a zero-VOC coating formulation. Additionally, Airase® 8070 Deaerator contains no added alkylphenol ethoxylates (APEs) or hazardous air pollutants (HAPs). view less | Request Sample |
| ALBIDUR® 1223 | Evonik Operations GmbH, BL Coating Additives | ALBIDUR® 1223 is a reactive resin modifier. It offers high flexibility, excellent adhesion, chemical and solvent resistance, and good long-term persistence. This product is recommended for formulations with very low VOC-content. | Request Sample |
| ALBIDUR® EP 2240 A | Evonik Operations GmbH, BL Coating Additives | ALBIDUR® EP 2240 A shows the highest performance in enhancing impact resistance without influencing chemical or corrosion resistance properties of pigmented epoxy coatings. | Request Sample |
| ALBIDUR® PU 5640 | Evonik Operations GmbH, BL Coating Additives | ALBIDUR® PU 5640 is a white liquid used in the primer/filler and top coat for waterborne, solventborne, and solvent-free 2-pack component polyurethane formulations. This product has an excellent increased tear and impact resistance. It also has good prese...view more ALBIDUR® PU 5640 is a white liquid used in the primer/filler and top coat for waterborne, solventborne, and solvent-free 2-pack component polyurethane formulations. This product has an excellent increased tear and impact resistance. It also has good preservation of network density and no change in mechanical properties. ALBIDUR® PU 5640 has reduced cure shrinkage, improved dirt shedding, and barrier properties against water and diluted acids. view less | Request Sample |
| ALKATERGE T | Univar Solutions | ALKATERGE T is a nonvolatile surface active agent which is a waxy solid at room temperature, only slightly soluble in water, yet soluble in aromatic hydrocarbons and lower alcohols or ketones, moderately soluble in aliphatic hydrocarbons, and miscible wit...view more ALKATERGE T is a nonvolatile surface active agent which is a waxy solid at room temperature, only slightly soluble in water, yet soluble in aromatic hydrocarbons and lower alcohols or ketones, moderately soluble in aliphatic hydrocarbons, and miscible with most vegetable oils. In its liquid state, ALKATERGE-T is miscible with almost all organic liquids. ALKATERGE-T is useful as a surface active agent which is indicated by the fact that 0.1% in mineral oil reduces the interfacial surface tension against water approximately 95%, or to less than 2 dynes/cm. view less | Request Sample |
| ALNOVOL® PN 650/60B | Allnex | ALNOVOL PN 650/60B is designed to act as a modifier of heat curable phenolic/polyester resin combinations (BADGE-free & BPA-NI systems) and phenolic/epoxy resin formulas. An addition of 20 - 40% of ALNOVOL PN 650/60B as solid on total dry film solid impro...view more ALNOVOL PN 650/60B is designed to act as a modifier of heat curable phenolic/polyester resin combinations (BADGE-free & BPA-NI systems) and phenolic/epoxy resin formulas. An addition of 20 - 40% of ALNOVOL PN 650/60B as solid on total dry film solid improves the flexibility of the coating by maintaining the chemical resistance. Positive effects in regards to leveling and substrate adhesion could be observed as well. Application areas are the interior and exterior layer of metal packaging goods like collapsibletubes,cans and drums for water,oils and food. view less | Request Sample |
| ALNOVOL® UF 410 RPC | Allnex | ALNOVOL® UF 410 RPC is a carbamic resin on silica. It is compatible with most of the synthetic and natural rubbers. Due to the silica carrier in solvents, no clear solution is possible. | Request Sample |
| AMP REGULAR | Univar Solutions | AMP REGULAR is a very efficient co-dispersant for pigments, and contributes pH stability, low odor, and anticorrosive properties; furthermore, it promotes acceptance of colorants. | Request Sample |
| AMP-95 | Univar Solutions | AMP-95 is a multifunctional specialty additive with a relatively low viscosity provides numerous benefits including co-dispersing, neutralization, low odor, formaldehyde scavenging and meets various FDA approvals for indirect food contact. | Request Sample |
| ANCAMIDE® 220-X-70 Curing Agent | Evonik Operations GmbH, BL Crosslinkers | ANCAMIDE® 220-X-70 Curing Agent is one in a series of standard reactive polyamides intended for use in the curing of epoxy resins. It is ideal for use in solvent-based maintenance coatings, primers, sealers and coatings for concrete. | Request Sample |
| BECKOCURE™ EH 2100w/44WA | Allnex | BECKOCURE™ EH 2100w/44WA is an amine-hardener dispersion, particularly suitable for the formulation of waterborne 2K-epoxy coatings for concrete and metal, free of volatile amines and solvents. In combination with epoxy dispersions or suitable liquid epox...view more BECKOCURE™ EH 2100w/44WA is an amine-hardener dispersion, particularly suitable for the formulation of waterborne 2K-epoxy coatings for concrete and metal, free of volatile amines and solvents. In combination with epoxy dispersions or suitable liquid epoxy resins, fast drying coatings with an excellent performance can be obtained. The product is easy to handle and to apply, even without the use of additional organic solvents. view less | Request Sample |
| BECKOCURE™ EH 2240/70MP | Allnex | BECKOCURE® EH 2240/70MP is an adduct hardener based on polyamines, thus free of volatile amines. In combination with suitable epoxy resins this hardener enables the formulation of high performing 2K high solids anticorrosion primers. | Request Sample |
| BECKOCURE™ EH 2260w/41WA | Allnex | BECKOCURE™ EH 2260W/41WA is a hydrophobic amine hardener recommended for the formulation of waterborne metal coatings, free of volatile basic amines and solvents. In combination with epoxy dispersions, fast drying primers and monocoats with excellent corr...view more BECKOCURE™ EH 2260W/41WA is a hydrophobic amine hardener recommended for the formulation of waterborne metal coatings, free of volatile basic amines and solvents. In combination with epoxy dispersions, fast drying primers and monocoats with excellent corrosion protection and very good non-sagging properties can be formulated. This product shows excellent application behavior and very robust performance even on poorly prepared surfaces. view less | Request Sample |
| BECKOPOX™ E 04643 | Allnex | BECKOPOX™ E 04643 is a highly reactive epoxide functional resin designed as a hardener for carboxyl functional polyester resins for use in the production of hybrid powder coatings. Coatings based on carboxylic polyesters such as CRYLCOAT® E 04613 and CRYL...view more BECKOPOX™ E 04643 is a highly reactive epoxide functional resin designed as a hardener for carboxyl functional polyester resins for use in the production of hybrid powder coatings. Coatings based on carboxylic polyesters such as CRYLCOAT® E 04613 and CRYLCOAT® E 04681 produce outstanding smoothness and chemical resistance at temperature as low as 125°C on MDF. view less | Request Sample |
| BECKOPOX™ E 04649 | Allnex | BECKOPOX™ E 04649 is an epoxide functional resin designed as hardener for carboxylated polyester resins for use in the production of hybrid powder coatings. Coatings based on carboxylic polyester such as CRYLCOAT® E 04632 for production of matte dry blend...view more BECKOPOX™ E 04649 is an epoxide functional resin designed as hardener for carboxylated polyester resins for use in the production of hybrid powder coatings. Coatings based on carboxylic polyester such as CRYLCOAT® E 04632 for production of matte dry blend powder coatings with gloss level of 20 – 35% produce outstanding smoothness at cure temperature as low as 130°C on MDF. view less | Request Sample |
| BECKOPOX™ E 04743 | Allnex | BECKOPOX™ E 04743 is a highly reactive epoxide functional resin designed as a hardener for carboxyl functional polyester resins for use in the production of hybrid powder coatings. Coatings based on carboxylic polyesters such as CRYLCOAT® E 04735 and CRYL...view more BECKOPOX™ E 04743 is a highly reactive epoxide functional resin designed as a hardener for carboxyl functional polyester resins for use in the production of hybrid powder coatings. Coatings based on carboxylic polyesters such as CRYLCOAT® E 04735 and CRYLCOAT® E 04681 produce outstanding smoothness and chemical resistance at temperature as low as 125°C on MDF. view less | Request Sample |
| BECKOPOX™ EH 2162w/75WA | Allnex | BECKOPOX™ EH 2162w/75WA is an aliphatic polyamine adduct. It's also a hardener for water-reducible coatings on mineral and metallic substrates. | Request Sample |
| BECKOPOX™ EH 2189w/50WA | Allnex | Beckopox® EH 2189W/50WA is a highly reactive amine hardener for waterbased 2K epoxy coatings on metallic substrates. It is used together with solid epoxy resin dispersions like e.g. Beckopox® EP 384W. Coating systems for metallic substrates can be formula...view more Beckopox® EH 2189W/50WA is a highly reactive amine hardener for waterbased 2K epoxy coatings on metallic substrates. It is used together with solid epoxy resin dispersions like e.g. Beckopox® EP 384W. Coating systems for metallic substrates can be formulated with excellent humidity and salt spray resistance. The use of 70 - 80 % of the stoichometric curing agent quantity has given best results. view less | Request Sample |
| BECKOPOX™ EH 623w/80WA | Allnex | Beckopox® EH 623W/80WA is a waterborne solvent and acetic acid free polyamine epoxy curing agent. It's a hardener for water-reducible coatings on mineral and metallic substrates, hydryaulic epoxy mortars (ECC). | Request Sample |
| BECKOPOX™ EH 694 | Allnex | BECKOPOX™ EH 694 is an anhydride hardener for use with solid epoxy resins, OH-functional polyesters or as an additional crosslinker for epoxy/polyester hybrid systems for the manufacture of powder coatings. Formulations based on BECKOPOX™ EH 694 exhibit c...view more BECKOPOX™ EH 694 is an anhydride hardener for use with solid epoxy resins, OH-functional polyesters or as an additional crosslinker for epoxy/polyester hybrid systems for the manufacture of powder coatings. Formulations based on BECKOPOX™ EH 694 exhibit chemical and over-bake resistance. view less | Request Sample |
| BECKOPOX™ VEH 2106w/80WA | Allnex | Beckopox® VEH 2106W/80WA is an aliphatic polyamine adduct that is used together with solid epoxy resin dispersions or emulsified liquid resins. | Request Sample |
| BECKOPOX™ VEH 2177w/80WA | Allnex | Beckopox® VEH 2177W/80WA is a waterborne non-acetic acid containing aliphatic polyamine adduct used together with solid epoxy resin dispersions or emulsified liquid resins. | Request Sample |
| BECKOPOX™ VEH 2188w/55WA | Allnex | Beckopox® VEH 2188W/55WA is a hydrophobic amine hardener especially for the formulation of waterborne metal coatings free of volatile basic amines. | Request Sample |
| BECKOPOX™ VEH 2849w/80WA | Allnex | Beckopox® VEH 2849W/80WA is a waterborne acetic acid free aliphatic polyamine adduct that is a highly reactive hardener for water reducible coatings on mineral metallic substrates where fast cure and water release are important. | Request Sample |
| CAB-O-SIL® EH-5F | Univar Solutions | CAB-O-SIL® EH-5F is a high-purity material that can act as carrier, flavor masking, anti-settling, thickening, anti-caking, and fat substitution additives in food applications. | Request Sample |
| CAB-O-SIL® EH5 | Univar Solutions | CAB-O-SIL® EH5 is a very high surface fumed silica which can increase the viscosity of liquid systems and provide significant reinforcement of silicone and organic rubbers. | Request Sample |
| CAB-O-SIL® H5 | Univar Solutions | CAB-O-SIL® H5 is a high surface area fumed silica that can impart a significant increase in the viscosity of liquid systems, and both reinforcement and viscosity of sealants and rubbers. It can be used to provide thickening, thixotropic (shear-thinning), ...view more CAB-O-SIL® H5 is a high surface area fumed silica that can impart a significant increase in the viscosity of liquid systems, and both reinforcement and viscosity of sealants and rubbers. It can be used to provide thickening, thixotropic (shear-thinning), and anti-settling behavior in liquid systems. High shear dispersion equipment is required to realize the full benefits of H-5 fumed silica. For clear coatings and other systems, well-dispersed CAB-O-SIL® H5 fumed silica allows for good transparency. view less | Request Sample |
| CAB-O-SIL® L90 | Univar Solutions | CAB-O-SIL® L90 is a low surface area fumed silica. It is untreated and provides rheology control and reinforcement for silicone sealants and elastomer applications. It is the most easily dispersed of Cabot’s untreated fumed silicas. | Request Sample |
| CAB-O-SIL® LM150 | Univar Solutions | CAB-O-SIL® LM150 is a low surface area fumed silica that imparts a moderate increase in viscosity, and reinforcement in liquid and polymer systems. It provides balance of dispersability, thixotropy, and reinforcement. This product is well suited for use f...view more CAB-O-SIL® LM150 is a low surface area fumed silica that imparts a moderate increase in viscosity, and reinforcement in liquid and polymer systems. It provides balance of dispersability, thixotropy, and reinforcement. This product is well suited for use for thixotropy in silicone sealants and for reinforcement in silicone rubbers. view less | Request Sample |
| CAB-O-SIL® M-5 | Univar Solutions | CAB-O-SIL® M-5 is a medium surface fumed silica which enables a significant increase in viscosity in liquid systems, free flow of powders and reinforcement of silicone and organic rubbers. | Request Sample |
| CAB-O-SIL® M-5F | Univar Solutions | CAB-O-SIL® M-5F is a high-purity material that can act as a carrier and a flavor masking, anti-settling, thickening, anti-caking, and fat substitution additive in food applications. | Request Sample |
| CAB-O-SIL® M7D | Univar Solutions | CAB-O-SIL® M7D is a medium-high surface area fumed silica that reinforces silicone rubber. The higher bulk density of CAB-O-SIL M7D fumed silica allows for faster incorporation and easier handling. It is suitable for use in the reinforcement of silicone r...view more CAB-O-SIL® M7D is a medium-high surface area fumed silica that reinforces silicone rubber. The higher bulk density of CAB-O-SIL M7D fumed silica allows for faster incorporation and easier handling. It is suitable for use in the reinforcement of silicone rubbers, including heat-cured rubber, high temp vulcanizing or high-consistency rubber (HTV or HCR), and liquid silicone rubber (LSR), in which it can increase hardness, tensile strength, and elongation. Due to the hydrophilic surface of CAB-O-SIL M-7D fumed silica, further modification of its surface is necessary to prevent crepe hardening. view less | Request Sample |
| CAB-O-SIL® MS75D | Univar Solutions | CAB-O-SIL® MS75D is a medium-high surface area fumed silica that reinforces silicone rubber. The higher bulk density of CAB-O-SIL MS-75D fumed silica allows for faster incorporation and easier handling. It is suitable for use in the reinforcement of silic...view more CAB-O-SIL® MS75D is a medium-high surface area fumed silica that reinforces silicone rubber. The higher bulk density of CAB-O-SIL MS-75D fumed silica allows for faster incorporation and easier handling. It is suitable for use in the reinforcement of silicone rubbers, including heat-cured rubber, high temp vulcanizing or high-consistency rubber (HTV or HCR), and liquid silicone rubber (LSR), in which it can increase hardness, tensile strength, and elongation. Due to the hydrophilic surface of CAB-O-SIL MS-75D fumed silica, further modification of its surface is necessary to prevent crepe hardening. view less | Request Sample |
| CAB-O-SIL® PTG | Univar Solutions | CAB-O-SIL® PTG is a medium-surface area of untreated fumed silica that is suitable for use in the thickening of unsaturated polyester resins. It enables thickening, thixotropic (shear-thinning), and anti-settling behavior in unsaturated polyester resins. ...view more CAB-O-SIL® PTG is a medium-surface area of untreated fumed silica that is suitable for use in the thickening of unsaturated polyester resins. It enables thickening, thixotropic (shear-thinning), and anti-settling behavior in unsaturated polyester resins. This thixotropic behavior enables good penetration of the resin into the matrix during application and prevents dripping. view less | Request Sample |
| CAB-O-SIL® TS-382 | Univar Solutions | CAB-O-SIL® TS-382 is a medium surface area fumed silica that has been surface-modified with octyltrimethoxysilane. The treatment replaces some of the hydroxyls on the surface of the silica, resulting in increased hydrophobicity and very different performa...view more CAB-O-SIL® TS-382 is a medium surface area fumed silica that has been surface-modified with octyltrimethoxysilane. The treatment replaces some of the hydroxyls on the surface of the silica, resulting in increased hydrophobicity and very different performance than untreated silica. view less | Request Sample |
| CAB-O-SIL® TS5022 | Univar Solutions | CAB-O-SIL® TS5022 has a surface that has been treated with hexamethyldisilazane (HMDZ). This treatment replaces hydroxyls on the surface of the silica, resulting in increased hydrophobicity and very different performance features than untreated silica. | Request Sample |
| CAB-O-SIL® TS530 | Univar Solutions | CAB-O-SIL® TS530 has a surface that has been treated with hexamethyldisilazane (HMDZ). This treatment replaces hydroxyls in the surface of the silica, resulting in increased hydrophobicity and very different performance features than untreated silica. | Request Sample |
| Carbowet® 106 Surfactant | Evonik Operations GmbH, BL Coating Additives | Carbowet® 106 Surfactant is a multifunctional, low-foaming, solvent-free, and alkylophenol ethoxylate-free additive for pigment and substrate wetting. This cost-effective surfactant provides rapid substrate and pigment wetting and performs in a wide range...view more Carbowet® 106 Surfactant is a multifunctional, low-foaming, solvent-free, and alkylophenol ethoxylate-free additive for pigment and substrate wetting. This cost-effective surfactant provides rapid substrate and pigment wetting and performs in a wide range of applications including architectural and industrial coatings, adhesives, pigment synthesis, pigment dispersion, and inks. Carbowet® 106 Surfactant is a clear, low-odor, low-viscosity liquid that is 100% active and features excellent ease of use. Carbowet® 106 Surfactant has an HLB of 10.7 and is an environmentally preferable alternative to alkylphenol ethoxylates having approximately 6 moles of ethylene oxide. view less | Request Sample |
| CARBOWET® 109 Surfactant | Evonik Operations GmbH, BL Coating Additives | CARBOWET® 109 Surfactant is a multifunctional, low-foaming, solvent-free, and alkylophenol ethoxylate-free additive for pigment and substrate wetting. This cost-effective surfactant provides rapid substrate and pigment wetting and performs in a wide range...view more CARBOWET® 109 Surfactant is a multifunctional, low-foaming, solvent-free, and alkylophenol ethoxylate-free additive for pigment and substrate wetting. This cost-effective surfactant provides rapid substrate and pigment wetting and performs in a wide range of applications including architectural and industrial coatings, adhesives, pigment synthesis, pigment dispersion and inks. CARBOWET® 109 Surfactant is a clear, low-odor, low-viscosity liquid that is 100% active and features excellent ease of use. CARBOWET® 109 Surfactant has an HLB of 13.1 and is an environmentally preferable alternative to alkylphenol ethoxylates having approximately 9 moles of ethylene oxide. view less | Request Sample |
| Carbowet® 138 Surfactant | Evonik Operations GmbH, BL Coating Additives | Carbowet® 138 Surfactant is a multifunctional additive for pigment and substrate wetting. This nonionic surfactant is typically used alone or in combination with an anionic surfactant. This cost-effective surfactant can provide rapid substrate and pigment...view more Carbowet® 138 Surfactant is a multifunctional additive for pigment and substrate wetting. This nonionic surfactant is typically used alone or in combination with an anionic surfactant. This cost-effective surfactant can provide rapid substrate and pigment wetting and perform in a wide range of applications. view less | Request Sample |
| Carbowet® GA-100 Surfactant | Evonik Operations GmbH, BL Coating Additives | Carbowet® GA-100 Surfactant is an optimized combination of nonionic additives designed to provide multifunctional wetting, stabilization, and compatibilization benefits in a wide range of aqueous formulations. Carbowet® GA-100 offers superior low-foam pig...view more Carbowet® GA-100 Surfactant is an optimized combination of nonionic additives designed to provide multifunctional wetting, stabilization, and compatibilization benefits in a wide range of aqueous formulations. Carbowet® GA-100 offers superior low-foam pigment wetting and milling efficiency benefits without the water sensitivity, foam, and rheology problems that are associated with APE surfactants. The performance characteristics of Carbowet® GA-100 surfactant extend to a wide range of applications and formulations in which the combination of dynamic wetting and compatibilization and stabilization can provide unique benefits. Furthermore, Carbowet® GA-100 surfactant contains no added APEs or solvents and is an easy-to-incorporate liquid additive. Carbowet® GA-100 surfactant offers the best performance in architectural paint millbases. view less | Request Sample |
| Carbowet® GA-210 Surfactant | Evonik Operations GmbH, BL Coating Additives | Carbowet® GA-210 Surfactant is a formulated nonionic additive for use in a wide range of applications. This multifunctional, low- foaming grind aid can provide rapid pigment and substrate wetting and is an environmentally preferable alternative to APE- co...view more Carbowet® GA-210 Surfactant is a formulated nonionic additive for use in a wide range of applications. This multifunctional, low- foaming grind aid can provide rapid pigment and substrate wetting and is an environmentally preferable alternative to APE- containing surfactants. It is designed to assist in the formulation of low- to zero-VOC coatings while offering improved color development, freeze-thaw stability, and scrub resistance. The performance advantages provided by Carbowet® GA-210 surfactant extend to a variety of applications where surface tension reduction and wetting combined in a compatible, easy-to-incorporate liquid are desired. Carbowet® GA-210 surfactant offers the most universal and balanced properties suitable for all applications. view less | Request Sample |
| Carbowet® GA-211 Surfactant | Evonik Operations GmbH, BL Coating Additives | Carbowet® GA-211 Surfactant is an optimized combination of nonionic additives designed to provide multifunctional wetting and stabilization benefits in a wide range of aqueous formulations. Carbowet® GA-211 surfactant can provide exceptional dry pigment w...view more Carbowet® GA-211 Surfactant is an optimized combination of nonionic additives designed to provide multifunctional wetting and stabilization benefits in a wide range of aqueous formulations. Carbowet® GA-211 surfactant can provide exceptional dry pigment wetting and deaeration and optimal milling efficiency, allowing for faster and stronger color development. The combination of properties provided by Carbowet® GA-211 surfactant can be used in a variety of applications for dynamic wetting, compatibilization, emulsification, and stabilization where an easy-to-incorporate liquid additive is desired. Carbowet® GA-211 surfactant offers low foam and strong dynamic wetting properties. view less | Request Sample |
| Carbowet® GA-221 Surfactant | Evonik Operations GmbH, BL Coating Additives | Carbowet® GA-221 Surfactant is an optimized combination of nonionic additives designed to provide multifunctional wetting and stabilization benefits in a wide range of aqueous formulations. Carbowet® GA-221 surfactant can provide exceptional dry pigment w...view more Carbowet® GA-221 Surfactant is an optimized combination of nonionic additives designed to provide multifunctional wetting and stabilization benefits in a wide range of aqueous formulations. Carbowet® GA-221 surfactant can provide exceptional dry pigment wetting and deaeration and optimizes milling efficiency, allowing for faster and stronger color development. The combination of properties provided by Carbowet® GA-221 surfactant can be used in a variety of applications for dynamic wetting, compatibilization, emulsification, and stabilization where an easy-to-incorporate liquid additive is desired. Compared to related products, Carbowet® GA-221 surfactant offers the most stabilization benefits and is a first choice for organic and carbon black pigment dispersions. view less | Request Sample |
| CDH | Kowa American Corporation | CDH is a white crystal powder, carboxylic acid dihyrazide that contains two active hydrazide groups. This product is used mainly in the powder coatings field for latent curing agent for one component epoxy resin. It also functions as a cross linking agent...view more CDH is a white crystal powder, carboxylic acid dihyrazide that contains two active hydrazide groups. This product is used mainly in the powder coatings field for latent curing agent for one component epoxy resin. It also functions as a cross linking agent for carbonyl containing emulsion in paint, adhesive, coating field for one liquid water emulsion. It is also a chain extender for Urethane resin and is also used as a reforming agent for synthetic resins and synthetic fibers. view less | Request Sample |
| CELLOSIZE™ EP-09 | Univar Solutions | CELLOSIZE™ EP-09 is a hydroxyethyl cellulose used in paints, graphic arts, and adhesives. | Request Sample |
| CELLOSIZE™ QP 100MH | Univar Solutions | CELLOSIZE™ QP 100MH is the highest molecular weight cellulosic polymer offered by The Dow Chemical Company, and aqueous solutions of CELLOSIZE QP 100MH HEC are the most pseudoplastic (non-Newtonian) in their rheology. CELLOSIZE QP 100MH HEC is used to thi...view more CELLOSIZE™ QP 100MH is the highest molecular weight cellulosic polymer offered by The Dow Chemical Company, and aqueous solutions of CELLOSIZE QP 100MH HEC are the most pseudoplastic (non-Newtonian) in their rheology. CELLOSIZE QP 100MH HEC is used to thicken household cleaning products, in the fabrication of toilet tank drop-in tablets, and other applications where very high thickening efficiency is the dominant performance requirement. view less | Request Sample |
| CELLOSIZE™ QP 15000H | Univar Solutions | CELLOSIZE™ QP 15000H is a medium molecular weight cellulosic polymer, useful for general thickening of water-borne systems including latex paints, personal care products, and household cleaning products. In latex paints, typical use levels of CELLOSIZE™ Q...view more CELLOSIZE™ QP 15000H is a medium molecular weight cellulosic polymer, useful for general thickening of water-borne systems including latex paints, personal care products, and household cleaning products. In latex paints, typical use levels of CELLOSIZE™ QP 15000H HEC are 4 to 6 pounds per 100 gallons, and in personal care/household cleaners, the levels of CELLOSIZE™ QP 15000H HEC are typically between 0.5% and 1%. view less | Request Sample |
| CELLOSIZE™ QP 300 | Univar Solutions | CELLOSIZE™ QP 300 is a medium-low molecular weight cellulosic polymer used as both a protective colloid and a latex paint thickener. In the emulsion polymerization of vinyl and acrylic monomers to produce latexes for architectural coatings, the typical us...view more CELLOSIZE™ QP 300 is a medium-low molecular weight cellulosic polymer used as both a protective colloid and a latex paint thickener. In the emulsion polymerization of vinyl and acrylic monomers to produce latexes for architectural coatings, the typical use level of CELLOSIZE QP 300 HEC in latex synthesis is 2% by weight (based on total monomers) in vinyl and vinyl-acrylic latex formulations (usually less in all-acrylic formulations). view less | Request Sample |
| CELLOSIZE™ QP 30000H | Univar Solutions | CELLOSIZE™ QP 30000H is a medium-high molecular weight cellulosic polymer used as a general thickener for water-borne systems including latex paints, personal care products, and household cleaning products. In latex paints, typical use levels of CELLOSIZE...view more CELLOSIZE™ QP 30000H is a medium-high molecular weight cellulosic polymer used as a general thickener for water-borne systems including latex paints, personal care products, and household cleaning products. In latex paints, typical use levels of CELLOSIZE™ QP 30000H HEC are 4 to 6 pounds per 100 gallons, and in personal care and household cleaners, the levels of CELLOSIZE™ QP 30000H HEC are typically between 0.5% and 1%. view less | Request Sample |
| CELLOSIZE™ QP 4400H | Univar Solutions | CELLOSIZE™ QP 4400H is a medium molecular weight cellulosic polymer useful for general thickening applications, and is used primarily as a latex paint thickener. Its excellent rheological properties give paints good flow and leveling characteristics. | Request Sample |
| CELLOSIZE™ QP 52000H | Univar Solutions | CELLOSIZE™ QP 52000H is a high molecular weight cellulosic polymer that offers high thickening efficiency and is used as a general thickener for water-borne systems including latex paints, personal care products, household cleaning products, and tape-join...view more CELLOSIZE™ QP 52000H is a high molecular weight cellulosic polymer that offers high thickening efficiency and is used as a general thickener for water-borne systems including latex paints, personal care products, household cleaning products, and tape-joint compounds. view less | Request Sample |
| CELLOSIZE™ QP-100MH-V | Univar Solutions | CELLOSIZE™ QP-100MH-V is a very high molecular weight hydroxyethyl cellulose. The product is surface treated to avoid gel or lump formation when dissolved in aqueous systems. | Request Sample |
| Chemisnow® MR-1HG | Kowa American Corporation | Chemisnow® MR-1HG is a cross-linked acrylic particle that has a broad distribution range. It is used as a light diffusing agent, a painted surface modifying agent, and a film surface modifying agent. | Request Sample |
| Chemisnow® MR-2G | Kowa American Corporation | Chemisnow® MR-2G is a cross-linked acrylic particle that has a broad distribution range. It is used as a light diffusing agent, a painted surface modifying agent, and a film surface modifying agent. | Request Sample |
| Chemisnow® MR-5C | Kowa American Corporation | Chemisnow® MR-5C is a cross-linked acrylic particle that has a broad distribution range. It is used as a light diffusing agent, a painted surface modifying agent, and a film surface modifying agent. | Request Sample |
| Chemisnow® MR-7GC | Kowa American Corporation | Chemisnow® MR-5C is a cross-linked acrylic particle that has a broad distribution range. It is used as a light diffusing agent, a painted surface modifying agent, and a film surface modifying agent. | Request Sample |
| Chemisnow® MX-1000 | Kowa American Corporation | Chemisnow® MX-1000 is a cross-linked acrylic mono-dispersed particle. It has a very narrow distribution range and is used as a light diffusing agent and a film surface modifying agent. | Request Sample |
| Chemisnow® MX-150 | Kowa American Corporation | Chemisnow® MX-150 is a cross-linked acrylic mono-dispersed particle. It has a very narrow distribution range and is used as a light diffusing agent and a film surface modifying agent. | Request Sample |
| Chemisnow® MX-180 | Kowa American Corporation | Chemisnow® MX-180 is a cross-linked acrylic mono-dispersed particle. It has a very narrow distribution range and is used as a light diffusing agent and a film surface modifying agent. | Request Sample |
| Chemisnow® MX-2000 | Kowa American Corporation | Chemisnow® MX-2000 is a cross-linked acrylic mono-dispersed particle. It has a very narrow distribution range and is used as a light diffusing agent and a film surface modifying agent. | Request Sample |
| Chemisnow® MX-300 | Kowa American Corporation | Chemisnow® MX-300 is a cross-linked acrylic mono-dispersed particle. It has a very narrow distribution range and is used as a light diffusing agent and a film surface modifying agent. | Request Sample |
| Chemisnow® MX-3000 | Kowa American Corporation | Chemisnow® MX-3000 is a cross-linked acrylic mono-dispersed particle. It has a very narrow distribution range and is used as a light diffusing agent and a film surface modifying agent. | Request Sample |
| Chemisnow® MX-500 | Kowa American Corporation | Chemisnow® MX-500 is a cross-linked acrylic mono-dispersed particle. It has a very narrow distribution range and is used as a light diffusing agent and a film surface modifying agent. | Request Sample |
| Chemisnow® MX-80H3wT | Kowa American Corporation | Chemisnow® MX-80H3wT is a cross-linked acrylic mono-dispersed particle. It has a very narrow distribution range and is used as a light diffusing agent and a film surface modifying agent. | Request Sample |
| Chemisnow® MZ-10HN | Kowa American Corporation | Chemisnow® MZ-10HN is a cross-linked acrylic dispersed particle. It is highly cross linked, has excellent solvent resistance, and has a middle size distribution range. It is used as a light diffusing agent and a paint matting agent. | Request Sample |
| Chemisnow® MZ-12H | Kowa American Corporation | Chemisnow® MZ-12H is a cross-linked acrylic dispersed particle. It is highly cross linked, has excellent solvent resistance, and has a middle size distribution range. It is used as a light diffusing agent and a paint matting agent. | Request Sample |
| Chemisnow® MZ-16H | Kowa American Corporation | Chemisnow® MZ-16H is a cross-linked acrylic dispersed particle. It is highly cross linked, has excellent solvent resistance, and has a middle size distribution range. It is used as a light diffusing agent and a paint matting agent. | Request Sample |
| Chemisnow® MZ-20HN | Kowa American Corporation | Chemisnow® MZ-20HN is a cross-linked acrylic dispersed particle. It is highly cross linked, has excellent solvent resistance, and has a middle size distribution range. It is used as a light diffusing agent and a paint matting agent. | Request Sample |
| Chemisnow® MZ-30H | Kowa American Corporation | Chemisnow® MZ-30H is a cross-linked acrylic dispersed particle. It is highly cross linked, has excellent solvent resistance, and has a middle size distribution range. It is used as a light diffusing agent and a paint matting agent. | Request Sample |
| Chemisnow® SGP-150C | Kowa American Corporation | Chemisnow® SGP-150C is a polystyrene particle that has low, medium, and high crosslinking levels available. This product is used as a low shrinking agent for FRP. | Request Sample |
| Chemisnow® SGP-70C | Kowa American Corporation | Chemisnow® SGP-70C is a polystyrene particle that has low, medium, and high crosslinking levels available. This product is used as a low shrinking agent for FRP. | Request Sample |
| Chemisnow® SX-130H | Kowa American Corporation | Chemisnow® SX-130H is a crosslinked polystyrene mono-dispersed particle. This product is used as a light diffusing agent for AG (anti-glare) film. | Request Sample |
| Chemisnow® SX-350H | Kowa American Corporation | Chemisnow® SX-350H is a crosslinked polystyrene mono-dispersed particle. This product is used as a light diffusing agent for AG (anti-glare) film. | Request Sample |
| Chemisnow® SX-500H | Kowa American Corporation | Chemisnow® SX-350H is a crosslinked polystyrene mono-dispersed particle. This product is used as a light diffusing agent for AG (anti-glare) film. | Request Sample |
| CHEMREZ 30 | Univar Solutions | CHEMREZ 30 is a versatile vehicle with exceptional pigment wetting, gloss and transfer properties, and is recommended for use as a pigment dispersant as well as a general vehicle for water based inks and varnishes. It can be used as a grinding vehicle and...view more CHEMREZ 30 is a versatile vehicle with exceptional pigment wetting, gloss and transfer properties, and is recommended for use as a pigment dispersant as well as a general vehicle for water based inks and varnishes. It can be used as a grinding vehicle and/or a let-down vehicle. As grinding vehicle it is the major component and is used in an approximate 2:1 ratio of resin solution to dry pigment. CHEMREZ 30 has been used with a wide range of organic pigments as well as carbon black. CHEMREZ 30 as a letdown vehicle can be used upwards of 50% of the formulation. view less | Request Sample |
| COLOROL® F | Evonik Operations GmbH, BL Coating Additives | COLOROL® F is a hazy liquid formulation of high Mw phosphoamino structures. It can be used for solventborne formulations, as well as suitable for pigment concentrates and for direct grinds (with binder). This product ensures proper wetting and stabilizati...view more COLOROL® F is a hazy liquid formulation of high Mw phosphoamino structures. It can be used for solventborne formulations, as well as suitable for pigment concentrates and for direct grinds (with binder). This product ensures proper wetting and stabilization of inorganic and organic pigments. It is recommended for architectural coatings, bentonite pastes, wood coatings, industrial coatings, and anti-corrosion coatings. view less | Request Sample |
| CYCAT® 296-9 | Allnex | CYCAT® 296-9 Catalyst is an unique, phosphoric acid derivative "mild" catalyst developed to accelerate the cure of Cymel amino resins at normal baking temperatures, and to permit the cure of clear finishes and enamels within relatively low temperature ran...view more CYCAT® 296-9 Catalyst is an unique, phosphoric acid derivative "mild" catalyst developed to accelerate the cure of Cymel amino resins at normal baking temperatures, and to permit the cure of clear finishes and enamels within relatively low temperature ranges. Coatings containing CYCAT® 296-9 catalyst, may be cured on low temperature bake schedules to the same hardness as similar uncatalyzed systems which require higher temperatures. Since the corrosion resistance of finishes containing high levels of catalyst may be lessened, the resistance properties should be carefully checked. view less | Request Sample |
| CYCAT® 4040 | Allnex | CYCAT® 4040 Catalyst is a very versatile catalyst material especially formulated for consistency of strength for use in various solvent soluble and water-based thermosetting vehicles. It is especially recommended where a strong acid catalyst is desired to...view more CYCAT® 4040 Catalyst is a very versatile catalyst material especially formulated for consistency of strength for use in various solvent soluble and water-based thermosetting vehicles. It is especially recommended where a strong acid catalyst is desired to accelerate the cure of highly alkylated melamine-formaldehyde crosslinked systems and to reduce the curing temperature of urea resin systems. view less | Request Sample |
| CYCAT® 4045 | Allnex | CYCAT® 4045 Catalyst is an amine blocked para-toluene sulfonic acid catalyst. It is recommended for accelerating the cure response of amino crosslinking resins while providing improved formulation package stability compared with the un-blocked para-toluen...view more CYCAT® 4045 Catalyst is an amine blocked para-toluene sulfonic acid catalyst. It is recommended for accelerating the cure response of amino crosslinking resins while providing improved formulation package stability compared with the un-blocked para-toluene sulfonic acid CYCAT 4040 catalyst. It is especially recommended for use with highly alkylated amino crosslinking resins. This product provides excellent stability in high solids and waterborne systems, and in the latter it can be added without causing binder precipitation, which can often occur due to a drop in pH. view less | Request Sample |
| CYCAT® 500 | Allnex | CYCAT® 500 catalyst is a strong acid catalyst based on dinonylnaphthalene disulfonic acid supplied in isobutanol. It is recommended to accelerate the cure between hydroxyl, carboxyl, and amide functional groups with alkylated amino crosslinking agents. CY...view more CYCAT® 500 catalyst is a strong acid catalyst based on dinonylnaphthalene disulfonic acid supplied in isobutanol. It is recommended to accelerate the cure between hydroxyl, carboxyl, and amide functional groups with alkylated amino crosslinking agents. CYCAT® 500 is recommended for use in electrocoating applications to achieve cure in the range of 110 - 135°C in 15 - 30 minutes, or to reduce the baking time at higher baking temperatures. CYCAT® 500 is also recommended for coatings applied by other application techniques, providing improved adhesion and resistance properties compared with other sulfonic acid catalysts. Since CYCAT® 500 is a free acid, package stability could be adversely impacted. view less | Request Sample |
| CYCAT® 600 | Allnex | CYCAT® 600A catalyst is an organic acid catalyst recommended to accelerate the crosslinking reaction of amino resins with polymers containing hydroxyl, carboxyl, or amide functionality. CYCAT® 600A is soluble in aliphatic and aromatic hydrocarbons, esters...view more CYCAT® 600A catalyst is an organic acid catalyst recommended to accelerate the crosslinking reaction of amino resins with polymers containing hydroxyl, carboxyl, or amide functionality. CYCAT® 600A is soluble in aliphatic and aromatic hydrocarbons, esters, ketones, alcohols, glycol ethers and water. It may be used as a replacement for less soluble acid catalysts, such as para-toluene sulfonic acid, in low alcohol-containing formulations. For formulation of 1K systems, CYCAT® 600A should be blocked with an appropriate amine, such as AMP (2-amino-2-methyl-1-propanol). view less | Request Sample |
| CYCAT® 600A | Allnex | CYCAT® 600A catalyst is an organic acid catalyst recommended to accelerate the crosslinking reaction of amino resins with polymers containing hydroxyl, carboxyl, or amide functionality. CYCAT® 600A is soluble in aliphatic and aromatic hydrocarbons, esters...view more CYCAT® 600A catalyst is an organic acid catalyst recommended to accelerate the crosslinking reaction of amino resins with polymers containing hydroxyl, carboxyl, or amide functionality. CYCAT® 600A is soluble in aliphatic and aromatic hydrocarbons, esters, ketones, alcohols, glycol ethers and water. It may be used as a replacement for less soluble acid catalysts, such as para-toluene sulfonic acid, in low alcohol-containing formulations. For formulation of 1K systems, CYCAT® 600A should be blocked with an appropriate amine, such as AMP (2-amino-2-methyl-1-propanol). view less | Request Sample |
| CYCAT® 6020 | Allnex | CYCAT® 6020 catalyst is an amine-neutralized dodecylbenzene sulfonic acid supplied in isopropanol. It is recommended for use as a catalyst to accelerate the cure of amino crosslinking agents and provide improved package stability. As a general rule, syste...view more CYCAT® 6020 catalyst is an amine-neutralized dodecylbenzene sulfonic acid supplied in isopropanol. It is recommended for use as a catalyst to accelerate the cure of amino crosslinking agents and provide improved package stability. As a general rule, systems which employ a blocked catalyst will have a decreased rate of cure compared to those containing an unblocked catalyst, however, package stability with an unblocked catalyst will be poor. view less | Request Sample |
| CYCAT® 6030 | Allnex | CYCAT® 6030 catalyst is an amine-neutralized dodecylbenzene sulfonic acid supplied in isopropanol. It is recommended for use as a catalyst to accelerate the cure of amino crosslinking agents and provide improved package stability. As a general rule, syste...view more CYCAT® 6030 catalyst is an amine-neutralized dodecylbenzene sulfonic acid supplied in isopropanol. It is recommended for use as a catalyst to accelerate the cure of amino crosslinking agents and provide improved package stability. As a general rule, systems which employ a blocked catalyst will have a decreased rate of cure compared to those containing an unblocked catalyst; however, package stability with an unblocked catalyst will be poor. view less | Request Sample |
| CYCAT® 6051 | Allnex | CYCAT® 6051 is an extremely hydrophobic acid catalyst based on dinonylnaphthalene sulfonic acid supplied at 50% active in n-butanol. It is an oil soluble sulfonic acid that gives excellent humidity resistance in high bake amino and phenolic systems. | Request Sample |
| CYCAT® 655 CATALYST | Allnex | CYCAT 655 catalyst is a strong acid catalyst based on dinonylnaphthalene disulfonic acid supplied in isobutanol. It is recommended to accelerate the cure between hydroxyl, carboxyl, and amide functional groups with alkylated amino crosslinking agents. CYC...view more CYCAT 655 catalyst is a strong acid catalyst based on dinonylnaphthalene disulfonic acid supplied in isobutanol. It is recommended to accelerate the cure between hydroxyl, carboxyl, and amide functional groups with alkylated amino crosslinking agents. CYCAT 655 is recommended for use in electrocoating applications to achieve cure in the range of 110 - 135°C in 15 - 30 minutes, or to reduce the baking time at higher baking temperatures. CYCAT 655 is also recommended for coatings applied by other application techniques, providing improved adhesion and resistance properties compared with other sulfonic acid catalysts. Since CYCAT 655 is a free acid, package stability could be adversely impacted. view less | Request Sample |
| CYCAT® 6925 | Allnex | CYCAT® 6925 catalyst is an amine-blocked dodecylbenzene sulfonic acid catalyst supplied in isopropanol and 2-butoxyethanol. It is used to initiate and accelerate the cure of aminoplasts, such as those based on melamine, urea, and benzoguanamine which are ...view more CYCAT® 6925 catalyst is an amine-blocked dodecylbenzene sulfonic acid catalyst supplied in isopropanol and 2-butoxyethanol. It is used to initiate and accelerate the cure of aminoplasts, such as those based on melamine, urea, and benzoguanamine which are used to crosslink 1K thermoset systems. This product can be used in food contact applications. For the latest information about the compliance status with FDA, EU, Chinese or other food regulations. view less | Request Sample |
| CYCAT® VXK 6364 | Allnex | CYCAT® VXK 6364 is a catalyst which is suitable to accelerate the cure of fully alkylated melamine formaldehyde resins (hexamethoxymethylmelamine) like CYMEL 303 LF. Post curing of films containing CYCAT® VXK 6364 can occur. CYCAT® VXK 6364 is usable in s...view more CYCAT® VXK 6364 is a catalyst which is suitable to accelerate the cure of fully alkylated melamine formaldehyde resins (hexamethoxymethylmelamine) like CYMEL 303 LF. Post curing of films containing CYCAT® VXK 6364 can occur. CYCAT® VXK 6364 is usable in solvent and waterborne thermosetting vehicles. view less | Request Sample |
| CYCAT® VXK 6395 | Allnex | CYCAT® VXK 6395 is an amino blocked acidic catalyst. It was developed for cross-linking reaction of urea and melamine curing systems at low temperatures. Typical application areas are stoving paint systems for general industry and for OEM automotive syste...view more CYCAT® VXK 6395 is an amino blocked acidic catalyst. It was developed for cross-linking reaction of urea and melamine curing systems at low temperatures. Typical application areas are stoving paint systems for general industry and for OEM automotive systems. view less | Request Sample |
| CYCAT® XK 406 N | Allnex | Cycat® XK 406 N is a light to dark reddish coloured, low viscous liquid, phosphoric acid derivate. It increases the crosslinking speed of heat curing coating systems based on phenolic/-epoxide resin combinations. A significant improvement of adhesion prop...view more Cycat® XK 406 N is a light to dark reddish coloured, low viscous liquid, phosphoric acid derivate. It increases the crosslinking speed of heat curing coating systems based on phenolic/-epoxide resin combinations. A significant improvement of adhesion properties is often seen in connection with the use of this product; furthermore, the use of Cycat® XK 406 N often leads to an improved sulphur staining resistance of interior can coating systems. view less | Request Sample |
| CYMEL® 1123 | Allnex | CYMEL® 1123 resin is a highly methylated/ethylated benzoguanamine resin developed primarily for use as a crosslinking agent in electrocoating and conventional coatings requiring high detergent and chemical resistance. Its excellent balance between adhesio...view more CYMEL® 1123 resin is a highly methylated/ethylated benzoguanamine resin developed primarily for use as a crosslinking agent in electrocoating and conventional coatings requiring high detergent and chemical resistance. Its excellent balance between adhesion and film flexibility, especially after several cure cycles, makes it particularly well suited for can coating applications. While it is insoluble in water, this product shows excellent compatibility with water soluble backbone polymers and provides very good stability in pH-buffered alkaline waterborne formulations. view less | Request Sample |
| CYMEL® 1130 | Allnex | CYMEL® 1130 resin is a highly methylated n-butylated melamine crosslinker with a high degree of alkylation, low methylol content and a low imino functionality. The hydrophobic nature combined with the high solids properties makes it very suitable for gene...view more CYMEL® 1130 resin is a highly methylated n-butylated melamine crosslinker with a high degree of alkylation, low methylol content and a low imino functionality. The hydrophobic nature combined with the high solids properties makes it very suitable for general industrial high solids baking formulations requiring improved wetting of metal substrates, film adhesion and humidity resistance properties. This product is insoluble in water but shows excellent compatibility with water soluble backbone polymers and provides very good stability in pH-buffered alkaline waterborne formulations. view less | Request Sample |
| CYMEL® 1141 | Allnex | CYMEL® 1141 resin is a highly methylated/iso-butylated, carboxy-modified melamine crosslinker supplied in iso-butanol. It is especially designed for electro-deposition primer formulations requiring excellent corrosion and resistance properties. This produ...view more CYMEL® 1141 resin is a highly methylated/iso-butylated, carboxy-modified melamine crosslinker supplied in iso-butanol. It is especially designed for electro-deposition primer formulations requiring excellent corrosion and resistance properties. This product contains chelating groups which can form colored compounds with heavy metal ions such as iron and zinc. For that reason it is recommended to use CYMEL® 1141 resin only in dark single coat applications or primers and not in pastel colors. view less | Request Sample |
| CYMEL® 1156 | Allnex | CYMEL® 1156 resin is a highly butylated melamine resin developed for use in both water-borne and organo-soluble systems. It is very hydrophobic in nature, which makes it an excellent choice for internal can coating applications where good water extraction...view more CYMEL® 1156 resin is a highly butylated melamine resin developed for use in both water-borne and organo-soluble systems. It is very hydrophobic in nature, which makes it an excellent choice for internal can coating applications where good water extraction resistance is desired. Its excellent throwing power and migration efficiency makes this product suitable for anodic electrodeposition coatings. view less | Request Sample |
| CYMEL® 1158 | Allnex | CYMEL® 1158 is a butylated melamine-formaldehyde cross-linking agent with a medium to high degree of alkylation, a low to medium methylol content and a medium to high amino functionality. It is especially designed for medium solids systems, providing fast...view more CYMEL® 1158 is a butylated melamine-formaldehyde cross-linking agent with a medium to high degree of alkylation, a low to medium methylol content and a medium to high amino functionality. It is especially designed for medium solids systems, providing fast cure response, low blistering tendency and low formaldehyde release during cure. view less | Request Sample |
| CYMEL® 1161 | Allnex | CYMEL® 1161 resin is a highly monomeric, methylated/ iso-butylated melamine crosslinker with a high degree of alkylation. Its high monomer content allows for the formulation of high solids coatings with excellent appearance, recoat adhesion, and flexibili...view more CYMEL® 1161 resin is a highly monomeric, methylated/ iso-butylated melamine crosslinker with a high degree of alkylation. Its high monomer content allows for the formulation of high solids coatings with excellent appearance, recoat adhesion, and flexibility. It is especially recommended for automotive topcoats, general metal finishes, and coil coatings. view less | Request Sample |
| CYMEL® 1168 | Allnex | CYMEL® 1168 is a methylated, isobutylated melamine-formaldehyde cross-linking agent with a high degree of alkylation, a low methylol content and low imino functionality. It is suitable for a wide range of industrial stoving finishes, providing a good comb...view more CYMEL® 1168 is a methylated, isobutylated melamine-formaldehyde cross-linking agent with a high degree of alkylation, a low methylol content and low imino functionality. It is suitable for a wide range of industrial stoving finishes, providing a good combination of mechanical and chemical resistance properties. view less | Request Sample |
| CYMEL® 1172 | Allnex | CYMEL® 1172 resin is an unalkylated glycoluril crosslinker supplied in water at 45% solids. It is designed to be used for crosslinking aqueous neutral or acidic hydroxyl or amide functional polymers and combines excellent stability at acidic pH with excel...view more CYMEL® 1172 resin is an unalkylated glycoluril crosslinker supplied in water at 45% solids. It is designed to be used for crosslinking aqueous neutral or acidic hydroxyl or amide functional polymers and combines excellent stability at acidic pH with excellent reactivity. It cannot be used in amine neutralized or basic coating systems because of the potential problems of demethylolation of the compound and a significant decrease in cure response. view less | Request Sample |
