| Diethylene Glycol Dibutyl Ether | Clariant International Ltd. | Diethylene Glycol Dibutyl Ether is a clear, colorless liquid with a characteristic odor. The solvent features a low freezing point, high boiling point, and low viscosity. It is miscible in any ratio with solvents such as ethanol, acetone, benzene, ether, ...Vea Mas Diethylene Glycol Dibutyl Ether is a clear, colorless liquid with a characteristic odor. The solvent features a low freezing point, high boiling point, and low viscosity. It is miscible in any ratio with solvents such as ethanol, acetone, benzene, ether, and chlorinated hydrocarbons. It has little to no solubility in water and high molecular weight aliphatic hydrocarbons. DEGDBE is an excellent solvent for a wide range of polar and non-polar substances. Diethylene glycol dibutyl ether is an inert, aprotic solvent. It has wide applicability in various types of cleaning formulations. Examples include grease, wax, and stain removers and special low-flammability non-aqueous cleaning systems for electronic equipment. DEGDBE is used as a solvent for several coatings applications. It is a good coalescing agent with coupling ability. It is also used as solvent for inkjet inks, in formulations of deletion fluids for positive printing plates, retouching agents for lithographic printing and in cleaning agents for removing inks from printing machines. Vea Menos | |
| Dipropylene Glycol Dimethyl Ether | Clariant International Ltd. | Dipropylene Glycol Dimethyl Ether (DPGDME) is a colorless liquid with a mild, pleasant odor. It is completely miscible with most common organic solvents. However, it has limited solubility in water. DPGDME has no hydroxyl functionality. It is an inert, ap...Vea Mas Dipropylene Glycol Dimethyl Ether (DPGDME) is a colorless liquid with a mild, pleasant odor. It is completely miscible with most common organic solvents. However, it has limited solubility in water. DPGDME has no hydroxyl functionality. It is an inert, aprotic solvent and can be used in proton sensitive systems. Dipropylene Glycol Dimethyl Ether is not listed as a Hazardous Air Pollutant, has low toxicity, and offers an alternative to solvents being phased out as a result of the Clean Air Act. Due to its chemical stability and the absence of reactive groups, DPGDME can also be used as an inert reaction medium, e. g. for reactions with alkali and alkaline-earth metals (Grignard reactions), polymerizations etc. Dipropylene Glycol Dimethyl Ether is used in solvent-based coatings and water-based polyurethane/ isocyanate coating systems. It is used as environmentally friendly substitute for NMP (N-methyl pyrrolidone) e.g as as coalescing agent in water based polyurethane dispersions. Dipropylene glycol dimethyl ether is also used as a solvent for wood and furniture coatings as well as a solvent for hardeners. Vea Menos | |
| Dispersogen® 145 | Clariant International Ltd. | Dispersogen® 1728 is an anionic dispersing agent for pigments and minerals. It is a mixture of the mono‐ and diester of phosphoric acid based on long chain alkyl polyethylene glycols. Dispersogen® 145 is used as dispersing agent for point‐of‐sales coloran...Vea Mas Dispersogen® 1728 is an anionic dispersing agent for pigments and minerals. It is a mixture of the mono‐ and diester of phosphoric acid based on long chain alkyl polyethylene glycols. Dispersogen® 145 is used as dispersing agent for point‐of‐sales colorants in combination with nonionic dispersing agents, e.g. Dispersogen® MT 200. Vea Menos | |
| Dispersogen® 1728 | Clariant International Ltd. | Dispersogen® 1728 is an anionic dispersing agent for pigments and minerals. It is used for water based and solvent based pigment preparations, disperse dyes and printing inks. This product is suitable for inorganic pigments, carbon black and organic pigme...Vea Mas Dispersogen® 1728 is an anionic dispersing agent for pigments and minerals. It is used for water based and solvent based pigment preparations, disperse dyes and printing inks. This product is suitable for inorganic pigments, carbon black and organic pigments. The advantages of Dispersogen® 1728 are: high pigment concentration, low viscosity of the preparation, high stability of the preparation and low foaming. This slightly cloudy, viscous or pasty liquid is composed of an aqueous solution of a novolac derivative. Vea Menos | |
| Dispersogen® 2774 | Clariant International Ltd. | Dispersogen® 2774 is a nonionic dispersing agent for pigments and minerals. It is used as a dispersing agent for aqueous and solvent based pigment preparations and printing inks. Dispersogen® 2774 is specially suitable for carbon black and for organic pig...Vea Mas Dispersogen® 2774 is a nonionic dispersing agent for pigments and minerals. It is used as a dispersing agent for aqueous and solvent based pigment preparations and printing inks. Dispersogen® 2774 is specially suitable for carbon black and for organic pigments in aqueous pigment preparations. The advantages of Dispersogen® 2774 are: high pigment concentration, low viscosity of the preparation, high stability of the preparation in a wide temperature range and low foaming. This yellowish, viscous to pasty liquid is composed of a novolac alkoxylate. Vea Menos | |
| Dispersogen® 3169 | Clariant International Ltd. | Dispersogen® 3169 is a anionic dispersing agent for pigments. This brownish, clear liquid is an aqueous solution of an anionic novolac derivative. Dispersogen® 3169 is used for water based and solvent based pigment preparations, disperse dyes and printing...Vea Mas Dispersogen® 3169 is a anionic dispersing agent for pigments. This brownish, clear liquid is an aqueous solution of an anionic novolac derivative. Dispersogen® 3169 is used for water based and solvent based pigment preparations, disperse dyes and printing inks. It is suitable for inorganic pigments, carbon black and in particular for organic pigments. The advantages of Dispersing® Agent 3169 are high pigment concentration, low viscosity of the preparation, high stability of the preparation and low foaming. Vea Menos | |
| Dispersogen® 4387 | Clariant International Ltd. | Dispersogen® 4387 is an anionic dispersing agent for pigments and minerals. It is used for water based, solvent based of water / solvent based pigment preparations, paper printing inks, textile printing pastes and coatings. Dispersogen® 4387 is suitable f...Vea Mas Dispersogen® 4387 is an anionic dispersing agent for pigments and minerals. It is used for water based, solvent based of water / solvent based pigment preparations, paper printing inks, textile printing pastes and coatings. Dispersogen® 4387 is suitable for inorganic pigments (metal oxids), carbon black and especially for organic pigments (polycylcic and phthalocyanine pigments) that are difficult to disperse. This brown, cloudy liquid is free of any additional biocide, and it is composed of a modified castor oil derivative. The advantages of Dispersogen® 4387 are: high pigment concentration, low viscosity of the preparation, high stability of the preparation in a wide temperature range and low foaming. Vea Menos | |
| Dispersogen® AN 100 | Clariant International Ltd. | Dispersogen® AN 100 is a dispersing agent for universal colorants. It is a 3 – in – 1 product with nonionic and anionic surface active components and a polyglycol as humectant. This product functions as a wetting agent, dispersing agent, stabilizer, humec...Vea Mas Dispersogen® AN 100 is a dispersing agent for universal colorants. It is a 3 – in – 1 product with nonionic and anionic surface active components and a polyglycol as humectant. This product functions as a wetting agent, dispersing agent, stabilizer, humectant, and compatibilizer. Dispersogen® AN 100 is suitable for both inorganic and organic pigments. An additional humectant is not necessary. Vea Menos | |
| Dispersogen® AN 200 | Clariant International Ltd. | Dispersogen® AN 200 is an anionic dispersing agent for universal pigment preparations. It is able to disperse organic and inorganic pigments and suitable for label-free point-of-sales colorants and in-plant tinters. | |
| Dispersogen® C 4020 | Clariant International Ltd. | Dispersogen® C 4020 is a dispersing agent for inorganic pigments. | |
| Dispersogen® ECS | Clariant International Ltd. | Dispersogen® ECS is used as an anionic dispersing agent in universal pigment preparations (i.e. waterborne and solvent-borne). The product is able to disperse organic pigments and is suitable for label free in-plant tinters. | |
| Dispersogen® FA | Clariant International Ltd. | Dispersogen® FA is a nonionic surfactant used as a wetting and dispersing agent for waterborne pigment preparations and emulsifier for water-in-oil and oil-in-water emulsions in paints and coatings. Dispersogen® FA is recommended for inorganic pigment pr...Vea Mas Dispersogen® FA is a nonionic surfactant used as a wetting and dispersing agent for waterborne pigment preparations and emulsifier for water-in-oil and oil-in-water emulsions in paints and coatings. Dispersogen® FA is recommended for inorganic pigment preparations and point of sale colorants. Vea Menos | |
| Dispersogen® FSE | Clariant International Ltd. | Dispersogen® FSE is a wetting agent for waterborne paints and dispersing agent for pigments in pigment dispersions. This product is particularly suitable for inorganic pigments such as iron oxide, chrome oxide and mixed oxide pigments. Dispersogen® FSE ...Vea Mas Dispersogen® FSE is a wetting agent for waterborne paints and dispersing agent for pigments in pigment dispersions. This product is particularly suitable for inorganic pigments such as iron oxide, chrome oxide and mixed oxide pigments. Dispersogen® FSE is often used for inorganic pigments in combination with fatty amines like Genamin® CC 100 or Genamin® TA 100. Dispersogen® FSE offers a balanced viscosity to minimize sedimentation and at the same time enables dosing, pumping and feeding. A slightly alkaline pH of 7.5 - 8.5, adjusted by alkali like caustic soda, reduces the viscosity. Vea Menos | |
| Dispersogen® LEC | Clariant International Ltd. | Dispersogen® LEC is an amphoteric surfactant that functions as an emulsifier and dispersing agent. It is used as dispersing agent for inorganic pigments in combination with nonionic dispersing agents, e.g. Dispersogen® MT 200. This product improves the th...Vea Mas Dispersogen® LEC is an amphoteric surfactant that functions as an emulsifier and dispersing agent. It is used as dispersing agent for inorganic pigments in combination with nonionic dispersing agents, e.g. Dispersogen® MT 200. This product improves the the stability of colorants and the compatibility with waterborne and solvent-born coatings. Vea Menos | |
| Dispersogen® LFH | Clariant International Ltd. | Dispersogen® LFH is an anionic dispersing agent for pigments and minerals. This brownish, viscous liquid is free of any additional biocide. Dispersogen® LFH is an anionic AP-free dispersing agent and used for water / solvent based pigment preparations. It...Vea Mas Dispersogen® LFH is an anionic dispersing agent for pigments and minerals. This brownish, viscous liquid is free of any additional biocide. Dispersogen® LFH is an anionic AP-free dispersing agent and used for water / solvent based pigment preparations. It is suitable for inorganic pigments, carbon black and for organic pigments. The advantages of Dispersogen® LFH are: high pigment concentration, low viscosity of the preparation, high stability of the preparation in a wide temperature range and low foaming. Vea Menos | |
| Dispersogen® LFS | Clariant International Ltd. | Dispersogen® LFS is an anionic dispersing agent for pigments and minerals. This brownish, viscous liquid is free of any additional biocide, and it is composed of Polyarylalkylphenol polyethylene glycol ether phophoric acid ester. Dispersogen® LFS is an an...Vea Mas Dispersogen® LFS is an anionic dispersing agent for pigments and minerals. This brownish, viscous liquid is free of any additional biocide, and it is composed of Polyarylalkylphenol polyethylene glycol ether phophoric acid ester. Dispersogen® LFS is an anionic AP-free dispersing agent and used for water-based, solvent-based or water / solvent based pigment preparations. It is suitable for inorganic pigments, carbon black and for organic pigments. The advantages of Dispersogen® LFH are: high pigment concentration, low viscosity of the preparation, high stability of the preparation in a wide temperature range and low foaming. Vea Menos | |
| Dispersogen® LKS | Clariant International Ltd. | Dispersogen® LKS is a universal dispersing agent for organic and inorganic pigments. | |
| Dispersogen® MT 200 | Clariant International Ltd. | Dispersogen® MT 200 is a non-ionic dispersing agent based on renewable feedstock and with low VOC content. It is suitable for waterborne pigment preparations based on organic or inorganic pigments. | |
| Dispersogen® PCE | Clariant International Ltd. | Dispersogen® PCE is a modified polycarboxylate used for dispersing inorganic pigments. This product is composed of carboxylic acid groups on the principle polymer chain and polyethylene glycol ether side chains. The anionic charges on the principle chai...Vea Mas Dispersogen® PCE is a modified polycarboxylate used for dispersing inorganic pigments. This product is composed of carboxylic acid groups on the principle polymer chain and polyethylene glycol ether side chains. The anionic charges on the principle chain absorb onto the inorganic pigments and provide steric stabilization due to the polyethylene glycol ether side chains. This mechanism is sometimes superior to the electrostatic stabilization of polyacrylic acid salts or copolymers of acrylic acid and maleic acid resulting in higher dispersion stability. Vea Menos | |
| Dispersogen® PL 30 | Clariant International Ltd. | Dispersogen® PL 30 is an extremely efficient polymeric dispersing agent for waterborne in-plant tinters based on organic pigments. It is able to disperse very high pigment loads while still forming stable low viscous pigments pastes. | |
| Dispersogen® PL 40 | Clariant International Ltd. | Dispersogen® PL 40 is an anionic graft copolymer. This product is a polymeric dispersing agent for organic pigments and carbon blacks in aqueous pigment preparations. Dispersogen® PL 40 provides low dispersion viscosity of the pigment dispersion, preven...Vea Mas Dispersogen® PL 40 is an anionic graft copolymer. This product is a polymeric dispersing agent for organic pigments and carbon blacks in aqueous pigment preparations. Dispersogen® PL 40 provides low dispersion viscosity of the pigment dispersion, prevents sedimentation or syneresis and demonstrates good compatibility with resins and binders in waterborne coatings and inks. Vea Menos | |
| Dispersogen® PLF 100 | Clariant International Ltd. | Dispersogen® PLF 100 is a dispersing agent for organic and selected inorganic pigments in waterborne pigment preparations. It leads to good viscosity reduction, excellent colour strengths and storage stabilities. | |
| Dispersogen® PTS | Clariant International Ltd. | Dispersogen® PTS is a nonionic dispersing and wetting agent for organic pigments in dispersions, preparations and coatings. It is used for aqueous pigment dispersions, preparations, paints and coatings as a wetting and dispersing agent for pigments and as...Vea Mas Dispersogen® PTS is a nonionic dispersing and wetting agent for organic pigments in dispersions, preparations and coatings. It is used for aqueous pigment dispersions, preparations, paints and coatings as a wetting and dispersing agent for pigments and as emulsifier for polymer dispersions. This product is preferably suitable for organic pigments and carbon blacks and allows the production of stable, free flowing pigment preparations with low VOC – content and low odor. Vea Menos | |
| Dispersogen® SP Plus | Clariant International Ltd. | Dispersogen® SP Plus is a stabilizer and dispersant in organosilicate paints which contain up to 10% water glass (28% active potassium silicate). It improves the viscosity profile of the formulation and thereby helps to achieve application properties comp...Vea Mas Dispersogen® SP Plus is a stabilizer and dispersant in organosilicate paints which contain up to 10% water glass (28% active potassium silicate). It improves the viscosity profile of the formulation and thereby helps to achieve application properties comparable to those of dispersion paints. This product increases formulation options as the paints rheology profile can be further adjusted post-production by using additional rheology additives. Vea Menos | |
| Dispersogen® SPG | Clariant International Ltd. | Dispersogen® SPG is a stabilizer for silicate/organosilicate paints based on renewables. | |
| Dispersogen® SPS | Clariant International Ltd. | Dispersogen® SPS is a quaternary ammonium compound used as a dispersing agent and stabilizer for silicate paints. It prevents precipitates of silicate in silicate paints, and prolongs the shelf life of silicate paints. | |
| Dispersogen® SPV | Clariant International Ltd. | Dispersogen® SPV is a dispersing agent and stabilizer for silicate paints. It controls the viscosity behaviour of silicate paints. | |
| Dispersogen® TAS | Clariant International Ltd. | Dispersogen® TAS is a universal dispersing agent for inorganic pigments. | |
| Dispersogen® UDN | Clariant International Ltd. | Dispersogen® UDN is a mixture of nonionic dispersing and wetting agents used in pigment preparations. This yellowish liquid is suitable for inorganic pigments, organic pigments, and carbon black to produce stable, free flowing pigment preparations with hi...Vea Mas Dispersogen® UDN is a mixture of nonionic dispersing and wetting agents used in pigment preparations. This yellowish liquid is suitable for inorganic pigments, organic pigments, and carbon black to produce stable, free flowing pigment preparations with high solid contents. Dispersogen® UDN is used in emulsion paints to improve compatibility of pigments and minerals with polymers and binders and to enhance the tinting strength of organic pigments. Vea Menos | |
| Dynoadd® D-960 | Dynoadd by Dynea | Dynoadd® D-960 is a non-ionic, structured polymeric dispersing agent with excellent pigment affinity and effective steric stabilization, particularly suitable for the dispersion of carbon black in aqueous media. Dynoadd D-960 gives rapid initial pigment w...Vea Mas Dynoadd® D-960 is a non-ionic, structured polymeric dispersing agent with excellent pigment affinity and effective steric stabilization, particularly suitable for the dispersion of carbon black in aqueous media. Dynoadd D-960 gives rapid initial pigment wetting and deflocculation giving stable dispersions with low particle size. Pigment dispersions produced using Dynoadd D-960 have low viscosity and give excellent color strength, stability, and gloss in a wide variety of water-borne industrial coatings and printing inks. Vea Menos | Request Sample |
| Dynoadd® D-962 | Dynoadd by Dynea | Dynoadd® D-962 is a non-ionic, structured polymeric dispersing agent for water-borne formulations. Suitable for a broad range of organic pigments, Dynoadd® D-962 provides excellent pigment affinity and effective steric stabilization. Pigment concentrates ...Vea Mas Dynoadd® D-962 is a non-ionic, structured polymeric dispersing agent for water-borne formulations. Suitable for a broad range of organic pigments, Dynoadd® D-962 provides excellent pigment affinity and effective steric stabilization. Pigment concentrates produced using Dynoadd® D-962 have low viscosity and give excellent color strength and gloss in a wide variety of water-borne industrial coatings and printing inks. Vea Menos | Request Sample |
| Dynoadd® D-963 | Dynoadd by Dynea | Dynoadd® D-963 is a non-ionic, structured polymeric dispersing agent for water-borne formulations. Suitable for a broad range of organic pigments, Dynoadd® D-963 provides excellent pigment affinity and effective steric stabilization. The rapid initial pig...Vea Mas Dynoadd® D-963 is a non-ionic, structured polymeric dispersing agent for water-borne formulations. Suitable for a broad range of organic pigments, Dynoadd® D-963 provides excellent pigment affinity and effective steric stabilization. The rapid initial pigment wetting and deflocculation achieved with Dynoadd® D-963 results in stable dispersions with low particle size. Pigment concentrates produced using Dynoadd® D-963 have low viscosity and give excellent color strength and gloss in a wide variety of water-borne industrial coatings and printing inks. Vea Menos | Request Sample |
| Dynoadd® F-1 | Dynoadd by Dynea | Dynoadd® F-1 es un fluido polimérico, no siliconado y aditivo anticráter para revestimientos a base de solvente. Disminuye la tensión de la superficie en la formulación de los revestimientos, mejorando de esa manera la humectación de los sustratos. Se el...Vea Mas Dynoadd® F-1 es un fluido polimérico, no siliconado y aditivo anticráter para revestimientos a base de solvente. Disminuye la tensión de la superficie en la formulación de los revestimientos, mejorando de esa manera la humectación de los sustratos. Se eliminan defectos de superficie como cráteres, cisuras y perforaciones. Dynoadd® F-1 tiene una compatibilidad limitada pero equilibrada con la mayoría de las cadenas principales de las resinas y posee propiedades que evitan que se forme espuma en muchas formulaciones. Dynoadd® F-1 es una excelente opción para revestimientos multicapa. Dynoadd® F-1 se aplica en revestimientos industriales, revestimientos de carrete, OEM automotores, tintas de impresión y revestimientos de madera. El aditivo es compatible con la mayoría de los sistemas de revestimiento con base solvente o no solvente, independientemente de la composición química de la laca. Se puede utilizar en todas las capas de los sistemas multicapa. Vea Menos | Request Sample |
| Dynoadd® F-100 | Dynoadd by Dynea | Dynoadd® F-100 es un fluido polimérico, no siliconado y aditivo anti-crater para revestimientos a base de solvente. Disminuye la tensión de la superficie en las formulaciones. Se eliminan defectos de superficie como cráteres, cisuras y perforaciones. Dy...Vea Mas Dynoadd® F-100 es un fluido polimérico, no siliconado y aditivo anti-crater para revestimientos a base de solvente. Disminuye la tensión de la superficie en las formulaciones. Se eliminan defectos de superficie como cráteres, cisuras y perforaciones. Dynoadd® F-100 es más compatible con las cadenas principales de las resinas que Dynoadd® F-1 y brinda un rendimiento mejorado en sistemas más polares. Dynoadd® F-100 se aplica en revestimientos de carrete, revestimientos de latas, OEM automotores y tintas de impresión. El aditivo es compatible con la mayoría de los sistemas de revestimiento con base solvente o no solvente, independientemente de la composición química de la laca. Sin embargo, es más compatible en sistemas polares que Dynoadd® F-1. Se puede utilizar en todas las capas de los sistemas multicapa. Vea Menos | Request Sample |
| Dynoadd® F-101 | Dynoadd by Dynea | Dynoadd® F-101 es un fluido polimérico no siliconado y agente nivelador. Reduce la tensión de las superficie en sistemas de revestimiento a base de solvente y no solvente. Elimina los defectos de superficie, como cráteres, cisuras y perforaciones. Dynoad...Vea Mas Dynoadd® F-101 es un fluido polimérico no siliconado y agente nivelador. Reduce la tensión de las superficie en sistemas de revestimiento a base de solvente y no solvente. Elimina los defectos de superficie, como cráteres, cisuras y perforaciones. Dynoadd® F-101 es más polar que Dynoadd® F-100. Dynoadd® F-101 brinda una protección mejorada ante defectos de la superficie en formulaciones curadas por radiación. Su mayor polaridad contribuye a lograr una buena humectación de los pigmentos y una mejor adherencia en algunos sistemas. Dynoadd® F-101 se aplica en revestimientos de carrete, OEM automotor, tinta de impresión y revestimientos curados por radiación. El aditivo es compatible con la mayoría de los sistemas de capas de base solvente y no solvente, independientemente de la composición química de la laca. Sin embargo, se ha comprobado que Dynoadd® F-101 tiene una ventaja extra en sistemas polares de laca debido a sus propiedades polares. Puede utilizarse en todas las capas en los sistemas multicapa. Vea Menos | Request Sample |
| Dynoadd® F-102 | Dynoadd by Dynea | Dynoadd® F-102 es un poliester acrílico modificado no siliconado diseñado para fórmulas a base de solventes. Dado su peso molecular y composición química, Dynoadd® F-102 brinda un buen equilibrio de flujo y propiedades que previenen la formación de espuma...Vea Mas Dynoadd® F-102 es un poliester acrílico modificado no siliconado diseñado para fórmulas a base de solventes. Dado su peso molecular y composición química, Dynoadd® F-102 brinda un buen equilibrio de flujo y propiedades que previenen la formación de espuma en una amplia variedad de formulaciones. El agregado de Dynoadd® F-102 contribuirá de manera positiva a la humectación de los sutratos. Dynoadd® F-102 se aplica en revestimientos de carrete e industriales en general. Este aditivo tiene compatibilidad limitada en muchos sistemas de laca, por lo que contribuye a evitar la formación de espuma y a nivelar la superficie. Se puede utilizar en todas las capas de los sistemas multicapa. Vea Menos | Request Sample |
| Dynoadd® F-106 | Dynoadd by Dynea | Dynoadd® F-106 es un fluido no siliconado y un aditivo nivelador para formulaciones de revestimientos transparentes con base solvente para automotores. Elimina los defectos de superficie como la piel de naranja, los cráteres y las protuberancias. Dynoadd®...Vea Mas Dynoadd® F-106 es un fluido no siliconado y un aditivo nivelador para formulaciones de revestimientos transparentes con base solvente para automotores. Elimina los defectos de superficie como la piel de naranja, los cráteres y las protuberancias. Dynoadd® F-106 mejora el fluido y la nivelación manteniendo una excelente transparencia. Dynoadd® F-106 se aplica como revestimiento transparente en automotores OEM. Vea Menos | Request Sample |
| Dynoadd® F-113 | Dynoadd by Dynea | Dynoadd® F-113 is a silicone-free, flow, and leveling additive for solvent-based heat set topcoat formulations. By creating a surface layer with high cross-linking density, F-113 reduces dirt pickup and increases anti-blocking properties. Dynoadd® F-113 c...Vea Mas Dynoadd® F-113 is a silicone-free, flow, and leveling additive for solvent-based heat set topcoat formulations. By creating a surface layer with high cross-linking density, F-113 reduces dirt pickup and increases anti-blocking properties. Dynoadd® F-113 can improve protective film release and, in some cases, anti-graffiti properties. Surface defects such as orange peel, craters, and popping are eliminated. Vea Menos | Request Sample |
| Dynoadd® F-200 | Dynoadd by Dynea | Dynoadd® F-200 is a high molecular-weight acrylic polymer that effectively controls surface tension in solvent-based coating systems. F-200 is contributing to improved flow, and a reduction in surface imperfections like craters, orange peel, and pinholes....Vea Mas Dynoadd® F-200 is a high molecular-weight acrylic polymer that effectively controls surface tension in solvent-based coating systems. F-200 is contributing to improved flow, and a reduction in surface imperfections like craters, orange peel, and pinholes. Dynoadd® F-200 improves air release and reduces foam formation. Vea Menos | Request Sample |
| Dynoadd® F-201ND | Dynoadd by Dynea | Dynoadd® F-201ND is a solution of a polyester-modified acrylic polymer that effectively controls surface tension in solvent-based coating systems. Dynoadd® F-201ND improves air release and reduces foam formation. Small additions contribute to improved flo...Vea Mas Dynoadd® F-201ND is a solution of a polyester-modified acrylic polymer that effectively controls surface tension in solvent-based coating systems. Dynoadd® F-201ND improves air release and reduces foam formation. Small additions contribute to improved flow, and a reduction in surface imperfections like craters, orange peel, and pinholes. Vea Menos | Request Sample |
| Dynoadd® F-300 | Dynoadd by Dynea | Dynoadd® F-300 es un fluido polimérico, no siliconado y aditivo humectante para revestimientos a base de solvente. Disminuye la tensión de la superficie en las formulaciones. Elimina defectos de superficie como los cráteres, cisuras y perforaciones. Dyn...Vea Mas Dynoadd® F-300 es un fluido polimérico, no siliconado y aditivo humectante para revestimientos a base de solvente. Disminuye la tensión de la superficie en las formulaciones. Elimina defectos de superficie como los cráteres, cisuras y perforaciones. Dynoadd® F-300 es más compatible con las cadenas principales de las resinas que Dynoadd® F-3 y brinda un mejor rendimiento en sistemas más polares. Dynoadd® F-300 se aplica en revestimientos de latas y de carretes. Este aditivo es compatible con la mayoría de los sistemas de revestimiento con base solvente o no solvente, independientemente de la composición química de la laca. No obstante, es más compatible en sistemas polares que Dynoadd® F-3. Se puede utilizar en todas las capas de los sistemas multicapa. Vea Menos | Request Sample |
| Dynoadd® F-3B | Dynoadd by Dynea | Dynoadd® F-3Bg es Dynoadd® F-3 disuelto en butilglicol . Dynoadd® F-3Bg es un fluido polimérico, no siliconado y aditivo anticráter para revestimientos a base de solvente. Disminuye la tensión de la superficie, mejorando de esa manera la humectación de l...Vea Mas Dynoadd® F-3Bg es Dynoadd® F-3 disuelto en butilglicol . Dynoadd® F-3Bg es un fluido polimérico, no siliconado y aditivo anticráter para revestimientos a base de solvente. Disminuye la tensión de la superficie, mejorando de esa manera la humectación de los sustratos. Elimina los defectos de superficie como los cráteres, cisuras y perforaciones. Dynoadd® F-3Bg tiene compatibilidad limitada pero equilibrada con la mayoría de las cadenas principales de las resinas y posee propiedades que evitan que se forme espuma en muchas formulaciones. Dynoadd® F-3Bg es una excelente opción para revestimientos multicapa porque no interfiere en la adherencia intercapa. Dynoadd® F-3B se aplica en revestimientos de carrete y de latas. Este aditivo es compatible con la mayoría de los sistemas de revestimiento con base solvente o no solvente, independientemente de la composición química de la laca. Se puede utilizar en todas las capas de los sistemas multicapa. Vea Menos | Request Sample |
| Dynoadd® F-404 | Dynoadd by Dynea | Dynoadd® F-404 es un aditivo modificado con siloxano a base de poliester que controla eficazmente la tensión de la superficie en sistemas de revestimiento a base de solvente. Dynoadd® F-404 brinda un excelente flujo, nivelación y resistencia a los crátere...Vea Mas Dynoadd® F-404 es un aditivo modificado con siloxano a base de poliester que controla eficazmente la tensión de la superficie en sistemas de revestimiento a base de solvente. Dynoadd® F-404 brinda un excelente flujo, nivelación y resistencia a los cráteres en el exceso de pintura en revestimientos aplicados mediante aerosol. El aditivo mejora significativamente la apariencia de la película en niveles bajos de dosificación. Mejora la calidad patinosa de la superficie y al mismo tiempo, incrementa el nivel de adición. Dynoadd® F-404 se aplica en la industria en general, en revestimientos para maderas y en OEM/ y acabados automotrices. Este aditivo es compatible con la mayoría de los sistemas de capas de base de solventes y no solventes, independientemente de la composición química de la laca. Vea Menos | Request Sample |
| Dynoadd® F-409 | Dynoadd by Dynea | Dynoadd® F-409 es un aditivo modificado con siloxano a base de poliester que controla eficazmente la tensión de la superficie en sistemas de revestimiento UV. Dynoadd® F-409 brinda un excelente flujo, nivelación y resistencia a los cráteres en el exceso d...Vea Mas Dynoadd® F-409 es un aditivo modificado con siloxano a base de poliester que controla eficazmente la tensión de la superficie en sistemas de revestimiento UV. Dynoadd® F-409 brinda un excelente flujo, nivelación y resistencia a los cráteres en el exceso de pintura en revestimientos aplicados mediante aerosol. El aditivo reduce significativamente la piel de naranja y mejora la apariencia de la película en niveles bajos de dosificación. Mejora la calidad patinosa de la superficie y al mismo tiempo, incrementa el nivel de adición. Dynoadd® F-409 se aplica en la industria en general y a revestimientos para maderas. Este aditivo es compatible con la mayoría de los sistemas con base de solventes y no solventes que se curan con radiación, independientemente de la composición química del oligómero. Vea Menos | Request Sample |
| Dynoadd® F-414 | Dynoadd by Dynea | Dynoadd® F-414 is a polyester-modified, siloxane-based additive that effectively controls surface tension in solvent-based coating systems. Dynoadd® F-414 gives excellent flow, leveling, and overspray cratering resistance to spray-applied coatings. The ad...Vea Mas Dynoadd® F-414 is a polyester-modified, siloxane-based additive that effectively controls surface tension in solvent-based coating systems. Dynoadd® F-414 gives excellent flow, leveling, and overspray cratering resistance to spray-applied coatings. The additive significantly improves film appearance at low dosage levels. Enhanced surface slip is gained with an increasing level of addition. Vea Menos | Request Sample |
| Dynoadd® F-461 | Dynoadd by Dynea | Dynoadd® F-461, developed by Dynea, is an SVHC-free polyether polysiloxane wetting, levelling, and slip additive for water-borne, solvent-borne, and UV formulations. The product reduces surface tension and prevents defects. Dynoadd® F-461 also gives a sig...Vea Mas Dynoadd® F-461, developed by Dynea, is an SVHC-free polyether polysiloxane wetting, levelling, and slip additive for water-borne, solvent-borne, and UV formulations. The product reduces surface tension and prevents defects. Dynoadd® F-461 also gives a significant reduction in foam formation and stability in WB applications. Surface slip is improved considerably giving improved scratch and mar resistance. Dynoadd® F-461 is a wetting additive providing an optimal all-around balance of properties and benefits. Vea Menos | Request Sample |
| Dynoadd® F-462 | Dynoadd by Dynea | Dynoadd® F-462, developed by Dynea, is a modified polysiloxane wetting and levelling additive for waterborne formulations. Dynoadd® F-462 reduces surface tension, improves substrate wetting, and prevents defects without increasing surface slip. | Request Sample |
| Dynoadd® F-470 | Dynoadd by Dynea | Dynoadd® F-470 elimina el aire atrapado, las perforaciones y la espuma de la superficie. Impide que se forme espuma durante la fabricación y la aplicación. Dynoadd® F-470 esta indicado para películas espesas como revestimientos para pisos, piezas de fund...Vea Mas Dynoadd® F-470 elimina el aire atrapado, las perforaciones y la espuma de la superficie. Impide que se forme espuma durante la fabricación y la aplicación. Dynoadd® F-470 esta indicado para películas espesas como revestimientos para pisos, piezas de fundición y moldería basadas en epóxi 2K, PU y PE no saturado. Dynoadd® F-470 no reduce la transparencia y está recomendado para revestimientos claros. Dynoadd® F-470 contiene un nivel más bajo de polímero clorado. Vea Menos | Request Sample |
| Dynoadd® F-601 | Dynoadd by Dynea | Dynoadd® F-601 es un poliester modificado por acrílico no siliconado para sistemas acuosos. Agregar Dynoadd® F-601 mejora la humectación de sustratos, el flujo y la nivelación. Dynoadd® F-601 resuelve problemas de cráteres, perforaciones, ojos de pez e im...Vea Mas Dynoadd® F-601 es un poliester modificado por acrílico no siliconado para sistemas acuosos. Agregar Dynoadd® F-601 mejora la humectación de sustratos, el flujo y la nivelación. Dynoadd® F-601 resuelve problemas de cráteres, perforaciones, ojos de pez e imperfecciones en la superficie. Dynoadd® F-601 se aplica en revestimientos industriales, de madera, revestimientos curados por radiación y automotrices. Este aditivo puede utilizarse en la mayoría de los sistemas de revestimientos acuosos independientemente de la composición química de la laca, siempre y cuando se agregue antes de disolverlo en agua. Se puede utilizar en todas las capas de los sistemas multicapa. Vea Menos | Request Sample |
| Dynoadd® F-603 | Dynoadd by Dynea | Dynoadd® F-603 es un aditivo aniónico no siliconado para sistemas acuosos. Dynoadd® F-603 mejora la humectación de sustratos, el flujo y la nivelación. Dynoadd® F-603 se aplica en revestimientos industriales, de madera, revestimientos curados por radiac...Vea Mas Dynoadd® F-603 es un aditivo aniónico no siliconado para sistemas acuosos. Dynoadd® F-603 mejora la humectación de sustratos, el flujo y la nivelación. Dynoadd® F-603 se aplica en revestimientos industriales, de madera, revestimientos curados por radiación y automotrices. Este aditivo puede utilizarse en la mayoría de los sistemas de revestimientos acuosos, independientemente de la composición química de la laca. El efecto del aditivo en la estabilidad de la resina debe controlarse como parte del procedimiento de evaluación.Se puede utilizar en todas las capas de los sistemas multicapa. Vea Menos | Request Sample |
| Dynoadd® F-606 | Dynoadd by Dynea | Dynoadd® F-606 is a non-ionic, silicone-free wetting agent with defoaming properties. Dynoadd® F-606 provides wetting and defoaming in water-based wood adhesives, inks, and coating formulations. The wetting properties of Dynoadd® F-606 extend also to impr...Vea Mas Dynoadd® F-606 is a non-ionic, silicone-free wetting agent with defoaming properties. Dynoadd® F-606 provides wetting and defoaming in water-based wood adhesives, inks, and coating formulations. The wetting properties of Dynoadd® F-606 extend also to improve pigment wetting. Vea Menos | Request Sample |
| Dynoadd® F-608 | Dynoadd by Dynea | Dynoadd® F-608 is a non-silicone, acrylic-modified polyester for water-borne systems. The addition of Dynoadd® F-608 improves substrate wetting and flow and leveling. Dynoadd® F-608 solves problems with craters, pinholes, fisheyes, and other surface imper...Vea Mas Dynoadd® F-608 is a non-silicone, acrylic-modified polyester for water-borne systems. The addition of Dynoadd® F-608 improves substrate wetting and flow and leveling. Dynoadd® F-608 solves problems with craters, pinholes, fisheyes, and other surface imperfections. The excellent compatibility of the additive with a wide range of resins gives good film clarity in clear coats. Dynoadd® F-608 is compatible with acrylic dispersions, polyurethane dispersions (PUDs), alkyd emulsions, water-reducible alkyds, and polyesters. Vea Menos | Request Sample |
| Dynoadd® F-701B | Dynoadd by Dynea | Dynoadd® F-701B es un aditivo polimérico altamente efectivo, particularmente como agente de liberación de aire y anti burbujas. Controla la tensión de la superficie en sistemas de revestimientos a base de solvente. Agregado en pequeñas cantidades también ...Vea Mas Dynoadd® F-701B es un aditivo polimérico altamente efectivo, particularmente como agente de liberación de aire y anti burbujas. Controla la tensión de la superficie en sistemas de revestimientos a base de solvente. Agregado en pequeñas cantidades también pueden contribuir a mejorar el fluido y a reducir imperfecciones de la superficie como cráteres, piel de naranja y perforaciones. Este producto tiene buena compatibilidad con diversas dispersiones de cera y ofrece un buen desempeño, aún en revestimientos muy encerados. Dynoadd® F-701B puede utilizarse con aditivos fluidos Dynoadd®, en especial Dynoadd® F-101. Vea Menos | Request Sample |
| Dynoadd® F-705 | Dynoadd by Dynea | Dynoadd® F-705 es un concentrado polimperico no siliconado, libre de COV, altamente efectivo para controlar la espuma. Es eficaz en formulaciones que se curan con radiación para prevenir la formación de espuma y es especialmente efectivo para liberar aire...Vea Mas Dynoadd® F-705 es un concentrado polimperico no siliconado, libre de COV, altamente efectivo para controlar la espuma. Es eficaz en formulaciones que se curan con radiación para prevenir la formación de espuma y es especialmente efectivo para liberar aire, reduciendo las burbujas y las perforaciones. Se puede utilizar como aditivo en cantidades de hasta el 0,1% para controlar la espuma y quitar el aire en revestimientos a base de solvente que están en contacto con alimentos. Dynoadd® F-705 se recomienda para prevenir la formación de espuma y la retención de aire en películas de revestimiento gruesas (UP, PUR, epoxy 2K). Dynoadd® F-705 se aplica en revestimientos de embalajes que están en contacto directo con alimentos, en revestimientos UV, para la industria en general y en revestimientos para pisos. Este aditivo es compatible con la mayoría de los sistemas de revestimiento con base solvente y no solvente, independientemente de la composición química de la laca. Puede utilizarse en todas las capas de los sistemas multicapa. Vea Menos | Request Sample |
| Dynoadd® F-706 | Dynoadd by Dynea | Dynoadd F-706 es un aditivo polimérico no siliconado, antiespuma, que libera el aire. Es efectivo para prevenir la formación de espuma y es especialmente eficaz en la liberación de aire, reduciendo las burbujas. No influye negativamente en la apariencia d...Vea Mas Dynoadd F-706 es un aditivo polimérico no siliconado, antiespuma, que libera el aire. Es efectivo para prevenir la formación de espuma y es especialmente eficaz en la liberación de aire, reduciendo las burbujas. No influye negativamente en la apariencia del revestimiento. Dynoadd® F-706 se aplica en revestimientos UV. El aditivo es compatible con la mayoría de los sistemas de revestimiento que se curan por radiación con base solvente y no solvente, independientemente de la composición química de la laca. Se pude utilizar en todas las capas de un sistema multicapa. Vea Menos | Request Sample |
| Dynoadd® F-707 | Dynoadd by Dynea | Dynoadd® F-707 es un aditivo polimérico no siliconado para controlar la espuma. Es efectivo para prevenir la formación de espuma y es especialmente eficaz en la liberación de aire, reduciendo las burbujas. Dynoadd® F-707 controla la tensión de la superfic...Vea Mas Dynoadd® F-707 es un aditivo polimérico no siliconado para controlar la espuma. Es efectivo para prevenir la formación de espuma y es especialmente eficaz en la liberación de aire, reduciendo las burbujas. Dynoadd® F-707 controla la tensión de la superficie en sistemas con base solvente y no solvente. En pequeñas cantidades puede contribuir también a mejorar el fluido y a reducir imperfecciones de la superficie, como cráteres y piel de naranja. Este producto tiene buena compatibilidad con diversas dispersiones de cera y ofrece un buen desempeño aún en revestimientos muy encerados. Dynoadd® F-707 puede utilizarse con aditivos fluidos Dynoadd®. Dynoadd® F-707 se aplica en revestimientos de carrete, PVdF, la industria en general y en revestimientos de embalajes. El aditivo es compatible con la mayoría de los sistemas de revestimiento que se curan por radiación con base solvente o no solvente, independientemente de la composición química de la laca. Se pude utilizar en todas las capas de un sistema multicapa. Vea Menos | Request Sample |
| Dynoadd® F-708 | Dynoadd by Dynea | Dynoadd® F-708 es un aditivo polimérico no siliconado para controlar la espuma. Es efectivo para prevenir la formación de espuma y es especialmente eficaz en la liberación de aire, reduciendo las burbujas. Dynoadd® F-708 controla la tensión de la superfic...Vea Mas Dynoadd® F-708 es un aditivo polimérico no siliconado para controlar la espuma. Es efectivo para prevenir la formación de espuma y es especialmente eficaz en la liberación de aire, reduciendo las burbujas. Dynoadd® F-708 controla la tensión de la superficie en sistemas con base solvente y no solvente. En pequeñas cantidades puede contribuir también a mejorar el fluido y a reducir imperfecciones de la superficie, como cráteres y piel de naranja. Dynoadd® F-708 tiene buena compatibilidad con diversas dispersiones de cera y ofrece un buen desempeño, aún en revestimientos muy encerados. Dynoadd® F-708 puede utilizarse con aditivos fluidos Dynoadd®, en particular Dynoadd® F-101. Dynoadd® F-708 se aplica en revestimientos de carrete, revestimientos PVdF, la industria en general y en revestimientos de embalajes. Se recomienda una dosis inicial de prueba de 0,05%. El aditivo es compatible con la mayoría de los sistemas de revestimiento que se curan por radiación con base solvente o no solvente, independientemente de la composición química de la laca. Se pude utilizar en todas las capas de un sistema multicapa. Vea Menos | Request Sample |
| Dynoadd® F-711 | Dynoadd by Dynea | Dynoadd® F-711 combina propiedades altamente eficaces de control de la espuma con una compatibilidad optimizada que da como resultado una mejora en el fluido y en las propiedades de nivelación. Esta combinación hace que el aditivo sea especialmente efecti...Vea Mas Dynoadd® F-711 combina propiedades altamente eficaces de control de la espuma con una compatibilidad optimizada que da como resultado una mejora en el fluido y en las propiedades de nivelación. Esta combinación hace que el aditivo sea especialmente efectivo en la prevención y reducción de los efectos de formación de burbujas. Dynoadd® F-711 es efectivo en fórmulas con poliester o melamina alquídica, PU 2K y acrílico 2K. Se aplica en revestimientos para acabados automovilísticos, revestimientos de carrete y revestimientos industriales. Vea Menos | Request Sample |
| Dynoadd® F-713 | Dynoadd by Dynea | Dynoadd® F-713 elimina el aire atrapado, las perforaciones y la espuma de la superficie en fórmulas 100% libres o con bajo porcentaje de COV. Impide que se forme espuma durante la fabricación y la aplicación. Dynoadd® F-713 esta indicado especialmente pa...Vea Mas Dynoadd® F-713 elimina el aire atrapado, las perforaciones y la espuma de la superficie en fórmulas 100% libres o con bajo porcentaje de COV. Impide que se forme espuma durante la fabricación y la aplicación. Dynoadd® F-713 esta indicado especialmente para películas espesas como revestimientos para pisos, piezas de fundición y moldería basadas en epóxi 2K, PU y PE no saturado. Dynoadd® F-713 puede reducir la transparencia de la película. Dynoadd® F-713 se aplica en fórmulas de epóxi 2K, PE no saturado y PU 1 y 2K. Vea Menos | Request Sample |
| Dynoadd® F-760 | Dynoadd by Dynea | Dynoadd® F-760 is a defoamer intended for use in water-borne industrial coating formulations including two-pack polyurethane formulations. It effectively prevents foam formation and rapidly destabilises and destroys foam in liquid coatings, resulting in c...Vea Mas Dynoadd® F-760 is a defoamer intended for use in water-borne industrial coating formulations including two-pack polyurethane formulations. It effectively prevents foam formation and rapidly destabilises and destroys foam in liquid coatings, resulting in coating surfaces that are easily recoated. Dynoadd® F-760 is based on a solution of foam destabilizing polymers and is silicone- and mineral oil-free. Vea Menos | Request Sample |
| Dynoadd® F-800 | Dynoadd by Dynea | Dynoadd® F-800 es un fluido multifuncional que promueve la adherencia y un agente de nivelación de la superficie. Modifica las superficies de los revestimientos mejorando considerablemente la adherencia a la espuma de poliuretano. Como efectivo aditivo de...Vea Mas Dynoadd® F-800 es un fluido multifuncional que promueve la adherencia y un agente de nivelación de la superficie. Modifica las superficies de los revestimientos mejorando considerablemente la adherencia a la espuma de poliuretano. Como efectivo aditivo del fluido y la nivelación, este producto controla la tensión de la superficie y elimina los defectos de la superficie como por ejemplo la piel de naranja, los cráteres y las perforaciones. Dynoadd® F-800 también tiene un efecto positivo en la humectación de de los sustratos y los pigmentos. Vea Menos | Request Sample |
| Dynoadd® F-802 | Dynoadd by Dynea | Dynoadd® F-802 is a multi-functional, adhesion-promoting flow and leveling agent. Dynoadd® F-802 has similar properties to Dynoadd® F-800 but with considerably higher reactivity enabling immediate adhesion between the coated surface and the -NCO cured for...Vea Mas Dynoadd® F-802 is a multi-functional, adhesion-promoting flow and leveling agent. Dynoadd® F-802 has similar properties to Dynoadd® F-800 but with considerably higher reactivity enabling immediate adhesion between the coated surface and the -NCO cured formulation. The novel surface active Dynoadd® F-802 polymer modifies coating surfaces in such a way that adhesion to -NCO curing formulations such as foam, adhesives, or coatings is considerably improved. As an effective flow and leveling additive Dynoadd® F-802 controls the surface tension of a coating thus eliminating surface defects such as orange peel, craters, and pinholes. The properties of Dynoadd® F-802 make it ideal for formulating backer coatings which have good foam adhesion without the use of additional adhesion resins. The adhesion promoting properties are maintained even after repeated curing. Vea Menos | Request Sample |
| Dynoadd® F-810 | Dynoadd by Dynea | Dynoadd® F-810 is a multi-functional, adhesion-promoting flow and leveling agent. The novel surface active Dynoadd® F-810 polymer modifies coating surfaces in such a way that adhesion to UV curing inks and coatings is considerably improved. As an effectiv...Vea Mas Dynoadd® F-810 is a multi-functional, adhesion-promoting flow and leveling agent. The novel surface active Dynoadd® F-810 polymer modifies coating surfaces in such a way that adhesion to UV curing inks and coatings is considerably improved. As an effective flow and leveling additive Dynoadd® F-810 controls the surface tension of a coating thus eliminating surface defects such as orange peel, craters, and pinholes. Dynoadd® F-810 also has a positive effect on substrate wetting. Vea Menos | Request Sample |
| Dynoadd® P-506 | Dynoadd by Dynea | Dynoadd® P-506 es un aditivo monodisperso de partículas esféricas que genera películas de textura especialmente fina y uniforme. Las partículas tienen una distribución muy ajustada del tamaño, lo que asegura que cada una brinde el efecto deseado generando...Vea Mas Dynoadd® P-506 es un aditivo monodisperso de partículas esféricas que genera películas de textura especialmente fina y uniforme. Las partículas tienen una distribución muy ajustada del tamaño, lo que asegura que cada una brinde el efecto deseado generando así tasas de adición más bajas que las de las tecnologías con las que compite. Este producto mejora la resistencia a los rasguños y realza de manera permanente la suavidad de la superficie. El tamaño de las partículas de Dynoadd® P-506 es de 6 micrones. Las partículas pueden utilizarse en fórmulas con base solvente, con base acuosa y en revestimientos que se curan con radiación. Las aplicaciones típicas son revestimientos de carrete, electrodomésticos, embalajes de cosméticos, teléfonos celulares, interiores de automotores, depósitos de maquinaria, revestimientos de madera y revestimientos ópticos. Vea Menos | Request Sample |
| Dynoadd® P-510 | Dynoadd by Dynea | Dynoadd® P-510® es un aditivo monodisperso de partículas esféricas que genera películas de textura especialmente fina y uniforme. Las partículas tienen una distribución muy ajustada del tamaño, lo que asegura que cada una brinde el efecto deseado generand...Vea Mas Dynoadd® P-510® es un aditivo monodisperso de partículas esféricas que genera películas de textura especialmente fina y uniforme. Las partículas tienen una distribución muy ajustada del tamaño, lo que asegura que cada una brinde el efecto deseado generando así tasas de adición más bajas que las de las tecnologías con las que compite. Este producto mejora la resistencia a los rasguños y realza de manera permanente la suavidad de la superficie. El tamaño de las partículas de Dynoadd® P-510 es de 10 micrones. Las partículas pueden utilizarse en fórmulas con base solvente, con base acuosa y en revestimientos que se curan con radiación. Las aplicaciones típicas son revestimientos de carrete, electrodomésticos, embalajes de cosméticos, teléfonos celulares, interiores de automotores, depósitos de maquinaria, revestimientos de madera y revestimientos ópticos. Vea Menos | Request Sample |
| Dynoadd® P-515 | Dynoadd by Dynea | Dynoadd® P-515 es un aditivo monodisperso, de partículas esféricas que genera películas de textura especialmente fina y uniforme. Las partículas tienen una distribución muy ajustada del tamaño, lo que asegura que cada una brinde el efecto deseado generand...Vea Mas Dynoadd® P-515 es un aditivo monodisperso, de partículas esféricas que genera películas de textura especialmente fina y uniforme. Las partículas tienen una distribución muy ajustada del tamaño, lo que asegura que cada una brinde el efecto deseado generando así tasas de adición más bajas que las de las tecnologías con las que compite. Este producto mejora la resistencia a los rasguños y realza de manera permanente la suavidad de la superficie. El tamaño de las partículas de Dynoadd® P-515 es de 15 micrones. Las partículas pueden utilizarse en fórmulas con base solvente, con base acuosa y en revestimientos que se curan con radiación. Las aplicaciones típicas son revestimientos de carrete, electrodomésticos, embalajes de cosméticos, teléfonos celulares, interiores de automotores, depósitos de maquinaria, revestimientos de madera y revestimientos ópticos. Vea Menos | Request Sample |
| Dynoadd® P-520 | Dynoadd by Dynea | Dynoadd® P-520 es un aditivo monodisperso, de partículas esféricas que genera películas de textura especialmente fina y uniforme. Las partículas tienen una distribución muy ajustada del tamaño, lo que asegura que cada una brinde el efecto deseado generand...Vea Mas Dynoadd® P-520 es un aditivo monodisperso, de partículas esféricas que genera películas de textura especialmente fina y uniforme. Las partículas tienen una distribución muy ajustada del tamaño, lo que asegura que cada una brinde el efecto deseado generando así tasas de adición más bajas que las de las tecnologías con las que compite. Este producto mejora la resistencia a los rasguños y realza de manera permanente la suavidad de la superficie. El tamaño de las partículas de Dynoadd® P-520 es de 20 micrones. Las partículas pueden utilizarse en fórmulas con base solvente, con base acuosa y en revestimientos que se curan con radiación. Las aplicaciones típicas son revestimientos de carrete, electrodomésticos, embalajes de cosméticos, teléfonos celulares, interiores de automotores, depósitos de maquinaria, revestimientos de madera y revestimientos ópticos. Vea Menos | Request Sample |
| Dynoadd® P-530 | Dynoadd by Dynea | Dynoadd® P-530 es un aditivo monodisperso de partículas esféricas que genera películas de textura especialmente fina y uniforme. Las partículas tienen una distribución muy ajustada del tamaño, lo que asegura que cada una brinde el efecto deseado generando...Vea Mas Dynoadd® P-530 es un aditivo monodisperso de partículas esféricas que genera películas de textura especialmente fina y uniforme. Las partículas tienen una distribución muy ajustada del tamaño, lo que asegura que cada una brinde el efecto deseado generando así tasas de adición más bajas que las de las tecnologías con las que compite. Este producto mejora la resistencia a los rasguños y realza de manera permanente la suavidad de la superficie. El tamaño de las partículas de Dynoadd® P-530 es de 30 micrones. Las partículas pueden utilizarse en fórmulas con base solvente, con base acuosa y en revestimientos que se curan con radiación. Las aplicaciones típicas son revestimientos de carrete, electrodomésticos, embalajes de cosméticos, teléfonos celulares, interiores de automotores, depósitos de maquinaria, revestimientos de madera y revestimientos ópticos. Vea Menos | Request Sample |
| Dynoadd® P-540 | Dynoadd by Dynea | Dynoadd® P-540 es un aditivo monodisperso, de partículas esféricas que genera películas con texturas especialmente finas y uniformes. Las partículas tienen una distribución muy ajustada del tamaño, lo que asegura que cada una brinde el efecto deseado gene...Vea Mas Dynoadd® P-540 es un aditivo monodisperso, de partículas esféricas que genera películas con texturas especialmente finas y uniformes. Las partículas tienen una distribución muy ajustada del tamaño, lo que asegura que cada una brinde el efecto deseado generando así tasas de adición más bajas que las de las tecnologías con las que compite. Este producto mejora la resistencia a los rasguños y realza de manera permanente la suavidad de la superficie. El tamaño de las partículas de Dynoadd® P-540 es de 40 micrones. Las partículas pueden utilizarse en fórmulas con base solvente, con base acuosa y en revestimientos que se curan con radiación. Las aplicaciones típicas son revestimientos de carrete, electrodomésticos, embalajes de cosméticos, teléfonos celulares, interiores de automotores, depósitos de maquinaria, revestimientos de madera y revestimientos ópticos. Vea Menos | Request Sample |
| Dynoadd® R-1001 | Dynoadd by Dynea | Dynoadd® R-1001 is a silicone-free release agent that when applied directly to application equipment prevents wood adhesives of all types from bonding to the metal surface. This prevents permanent adhesion and build-up of glue residues and eases the clean...Vea Mas Dynoadd® R-1001 is a silicone-free release agent that when applied directly to application equipment prevents wood adhesives of all types from bonding to the metal surface. This prevents permanent adhesion and build-up of glue residues and eases the cleaning of application equipment. Dynoadd® R-1001 prevents adhesion of most C84commonly used wood adhesive systems to production equipment greatly easing clean-up and reducing down-time. Dynoadd® R-1001 is effective in preventing the adhesion of formaldehyde resin based-, polyurethane based- and PVAc-based- adhesives to production equipment. Vea Menos | Request Sample |
| Emulsogen® 4084 | Clariant International Ltd. | Emulsogen® 4084 is a nonionic emulsifier for emulsion polymerization. This pale yellow wax is composed of block copolymer of propylene oxide and ethylene oxide, containing 60% w/w ethylene oxide. Emulsogen® 4084 is used in emulsion polymerization of polyv...Vea Mas Emulsogen® 4084 is a nonionic emulsifier for emulsion polymerization. This pale yellow wax is composed of block copolymer of propylene oxide and ethylene oxide, containing 60% w/w ethylene oxide. Emulsogen® 4084 is used in emulsion polymerization of polyvinyl acetate, acrylate and styrene/acrylate dispersions to stabilize the rheological behaviour of the polymer dispersions and to improve the electrolyte and shear stability. It can be used in combination with other nonionic, anionic and cationic surfactants. Vea Menos | |
| Emulsogen® APS 100 | Clariant International Ltd. | Emulsogen® APS 100 is a copolymerizable anionic emulsifier and hydrophilic monomer. It is used as emulsifier and comonomer in emulsion polymerization, particularly in the manufacture of acrylate, styrene/acrylate and vinyl acetate emulsions. The advantage...Vea Mas Emulsogen® APS 100 is a copolymerizable anionic emulsifier and hydrophilic monomer. It is used as emulsifier and comonomer in emulsion polymerization, particularly in the manufacture of acrylate, styrene/acrylate and vinyl acetate emulsions. The advantages of Emulsogen® APS 100 in comparison to conventional emulsifiers are the ability of copolymerisation to reduce migration, improved freeze- thaw, electrolyte and shear stability of the polymer emulsion and reduced water sensitivity and water up-take of the polymer film. Vea Menos | |
| Emulsogen® EPA 073 | Clariant International Ltd. | Emulsogen® EPA 073 is an anionic emulsifier, wetting and dispersing agent. This product is designed for use as an emulsifier in the production of acrylic and modified acrylic polymers and vinyl acetate copolymers used as pigment binders in coatings for pa...Vea Mas Emulsogen® EPA 073 is an anionic emulsifier, wetting and dispersing agent. This product is designed for use as an emulsifier in the production of acrylic and modified acrylic polymers and vinyl acetate copolymers used as pigment binders in coatings for paper and paperboard complying with 21 C.F.R. Sections 176.170 and 176.180 in contact with all types of food. Vea Menos | |
| Emulsogen® EPA 1954 | Clariant International Ltd. | Emulsogen® EPA 1954 is an anionic surfactant for industrial applications. It is used as an emulsifier for emulsion polymerization to produce polymer dispersions. The use of Emulsogen® EPA 1954 allows the production of polymer dispersions with controlled p...Vea Mas Emulsogen® EPA 1954 is an anionic surfactant for industrial applications. It is used as an emulsifier for emulsion polymerization to produce polymer dispersions. The use of Emulsogen® EPA 1954 allows the production of polymer dispersions with controlled particle size and low coagulation during the polymerization process. Vea Menos | |
| Emulsogen® EPN 118 | Clariant International Ltd. | Emulsogen® EPN 118 is a nonionic emulsifier for emulsion polymerization. It is used in polymerization of vinyl acetate together with other vinyl esters, acrylates, vinyl chloride and ethylene. | |
| Emulsogen® EPN 217 | Clariant International Ltd. | Emulsogen® EPN 217 is a nonionic emulsifier for emulsion polymerization. It is used as emulsifier in emulsion polymerization of olefinic monomers to reduce the grit level during polymerization and to improve the dispersion properties such as freeze-thaw s...Vea Mas Emulsogen® EPN 217 is a nonionic emulsifier for emulsion polymerization. It is used as emulsifier in emulsion polymerization of olefinic monomers to reduce the grit level during polymerization and to improve the dispersion properties such as freeze-thaw stability, electrolyte and sheer stability. Vea Menos | |
| Emulsogen® EPN 287 | Clariant International Ltd. | Emulsogen® EPN 287 is a nonionic emulsifier for emulsion polymerization. It is used in polymerization of vinyl acetate together with other vinyl esters, acrylates, vinyl chloride and ethylene, for acrylic and styrene / acrylic dispersions and for butadien...Vea Mas Emulsogen® EPN 287 is a nonionic emulsifier for emulsion polymerization. It is used in polymerization of vinyl acetate together with other vinyl esters, acrylates, vinyl chloride and ethylene, for acrylic and styrene / acrylic dispersions and for butadiene / styrene latex. Vea Menos | |
| Emulsogen® EPN 407 | Clariant International Ltd. | Emulsogen® EPN 407 is a nonionic emulsifier for emulsion polymerization. It is used in polymerization of vinyl acetate together with other vinyl esters, acrylates, vinyl chloride and ethylene, for acrylate and styrene / acrylate dispersions and for butadi...Vea Mas Emulsogen® EPN 407 is a nonionic emulsifier for emulsion polymerization. It is used in polymerization of vinyl acetate together with other vinyl esters, acrylates, vinyl chloride and ethylene, for acrylate and styrene / acrylate dispersions and for butadiene / styrene latex. Vea Menos | |
| Emulsogen® FT | Clariant International Ltd. | Emulsogen® FT is an anionic emulsifier and post additive for freeze-thaw stable polymer latexes. | |
| Emulsogen® LCN 070 | Clariant International Ltd. | Emulsogen® LCN 070 is a nonionic emulsifier for industrial applications. It is composed of alkyl polyethylene glycol ether with 7 mole ethylene oxide. This product is readily biodegradable and contains no additional biocides. Emulsogen® LCN 070 can be ...Vea Mas Emulsogen® LCN 070 is a nonionic emulsifier for industrial applications. It is composed of alkyl polyethylene glycol ether with 7 mole ethylene oxide. This product is readily biodegradable and contains no additional biocides. Emulsogen® LCN 070 can be used for the following applications: as wetting agent for industrial applications in aqueous solutions of 1 - 5 g/l; as wetting and dispersing agent in paints and coatings for fillers and pigments in concentrations of 0,5 - 1,0 %; as emulsifier for O/W - emulsions of oils, fats, silicon oils and polyolefin wax emulsions in concentrations of 5- 10 %; and as emulsifier for emulsion polymerization in recommended levels of 1 - 2 % based on monomers. Vea Menos | |
| Emulsogen® LCN 088 | Clariant International Ltd. | Emulsogen® LCN 088 is a nonionic emulsifier for industrial applications. It is composed of alkyl polyethylene glycol ether with 8 mole ethylene oxide. This product is readily biodegradable and contains no additional biocides. Emulsogen® LCN 088 is used as...Vea Mas Emulsogen® LCN 088 is a nonionic emulsifier for industrial applications. It is composed of alkyl polyethylene glycol ether with 8 mole ethylene oxide. This product is readily biodegradable and contains no additional biocides. Emulsogen® LCN 088 is used as a wetting agent for industrial applications in aqueous solutions of 1 - 5 g/l and as a dispersing agent in paints and coatings for fillers and pigments in concentrations of 0,1 - 1,0 %. Emulsogen® LCN 088 is also used as an emulsifier for O/W -emulsions of oils, fats, silicon oils and polyolefin wax emulsions in concentrations of 5- 10 % and for emulsion polymerization in recommended levels of 1- 2 % based on monomers. Vea Menos | |
| Emulsogen® LCN 118 | Clariant International Ltd. | Emulsogen® LCN 118 is a nonionic emulsifier for industrial applications. It is ready biodegradable and contains no additional biocides. This product is used as an emulsifier for emulsion polymerization to improve the shear, temperature and electrolyte sta...Vea Mas Emulsogen® LCN 118 is a nonionic emulsifier for industrial applications. It is ready biodegradable and contains no additional biocides. This product is used as an emulsifier for emulsion polymerization to improve the shear, temperature and electrolyte stability of polymer dispersions. Emulsogen® LCN 118 is also used as a dispersing agent for emulsion paints to improve the scrub resistance. Vea Menos | |
| Emulsogen® LCN 158 | Clariant International Ltd. | Emulsogen® LCN 158 is a nonionic emulsifier for industrial applications. It is composed of alkyl polyethylene glycol ether with 15 mole ethylene oxide. This product is is readily biodegradable and contains no additional biocides. Emulsogen® LCN 158 is use...Vea Mas Emulsogen® LCN 158 is a nonionic emulsifier for industrial applications. It is composed of alkyl polyethylene glycol ether with 15 mole ethylene oxide. This product is is readily biodegradable and contains no additional biocides. Emulsogen® LCN 158 is used as an emulsifier for emulsion polymerization improving the shear, temperature and electrolyte stability of polymer dispersions. It is also used as a dispersing agent for emulsion paints to improve the scrub resistance. Vea Menos | |
| Emulsogen® LCN 217 | Clariant International Ltd. | Emulsogen® LCN 217 is a nonionic emulsifier for industrial applications. It is composed of alkyl polyethylene glycol ether with 21 mole ethylene oxide. This product is ready biodegradable and contains no additional biocides. Emulsogen® LCN 217 is used as ...Vea Mas Emulsogen® LCN 217 is a nonionic emulsifier for industrial applications. It is composed of alkyl polyethylene glycol ether with 21 mole ethylene oxide. This product is ready biodegradable and contains no additional biocides. Emulsogen® LCN 217 is used as an emulsifier for emulsion polymerization improving the shear, temperature and electrolyte stability of polymer dispersions. This product is also is used as a dispersing agent for emulsion paints to improve the scrub resistance. Vea Menos | |
| Emulsogen® LCN 287 | Clariant International Ltd. | Emulsogen® LCN 287 is a nonionic emulsifier for industrial applications. It is used as emulsifier for emulsion polymerization of vinyl acetate, styrene and acrylate homo- and copolymers together with anionic surfactants like Emulsogen® EPA 073. Emulsogen®...Vea Mas Emulsogen® LCN 287 is a nonionic emulsifier for industrial applications. It is used as emulsifier for emulsion polymerization of vinyl acetate, styrene and acrylate homo- and copolymers together with anionic surfactants like Emulsogen® EPA 073. Emulsogen® LCN 287 improves the shear, temperature and electrolyte stability of polymer dispersions. It is used as a dispersing agent for inorganic and organic pigments in aqueous pigment preparations. Emulsogen® LCN 287 is used for aqueous paints and coatings as a dispersing agent and stabilizer to improve the compatibility of pigments with polymers. It prevents skinning of aqueous coatings e.g. in textile coaitngs with emulsion polymers. This product is also used as an emulsifier for aqueous emulsions of alkyd resins. Vea Menos | |
| Emulsogen® LCN 407 | Clariant International Ltd. | Emulsogen® LCN 407 is a nonionic emulsifier for industrial applications. This clear liquid to white pasty product is ready biodegradable and containsno additional biocides. Emulsogen® LCN 407 is used as an emulsifier for emulsion polymerization improving ...Vea Mas Emulsogen® LCN 407 is a nonionic emulsifier for industrial applications. This clear liquid to white pasty product is ready biodegradable and containsno additional biocides. Emulsogen® LCN 407 is used as an emulsifier for emulsion polymerization improving the shear, temperature and electrolyte stability of polymer dispersions. It is also used as a dispersing agent for emulsion paints to improve the scrub resistance. Emulsogen® LCN 407 can be diluted with water at room temperature without forming a strong gel phase. Vea Menos | |
| Emulsogen® PF 20 S | Clariant International Ltd. | Emulsogen® PF 20 S is an emulsifier for emulsion polymerization. This yellowish brown liquid is composed of polyalkylene glycol ether sulfate, ammonium salt. Emulsogen® PF 20 S is resistant to water hardness salts and to acids and alkalis in the concentra...Vea Mas Emulsogen® PF 20 S is an emulsifier for emulsion polymerization. This yellowish brown liquid is composed of polyalkylene glycol ether sulfate, ammonium salt. Emulsogen® PF 20 S is resistant to water hardness salts and to acids and alkalis in the concentrations normally used. It can be used in combination with other nonionic and anionic surfactants. Emulsogen® PF 20 S is used as an emulsifier in emulsion polymerization, particularly in the manufacture of acrylate and styrene / acrylate dispersions. Vea Menos | |
| Emulsogen® SF 8 | Clariant International Ltd. | Emulsogen® SF 8 is an anionic emulsifier and wetting agent. This cloudy liquid is composed of sodium di(2-ethylhexyl) sulfosuccinate in water. It can be used as a wetting agent for emulsion polymers, e.g. SBLatex for carpet coating. Emulsogen® SF 8 can al...Vea Mas Emulsogen® SF 8 is an anionic emulsifier and wetting agent. This cloudy liquid is composed of sodium di(2-ethylhexyl) sulfosuccinate in water. It can be used as a wetting agent for emulsion polymers, e.g. SBLatex for carpet coating. Emulsogen® SF 8 can also be used as a cake dewatering aide and as a wetting agent for aqueous, VOC-free paints and coatings. Vea Menos | |
| Emulsogen® TS 100 | Clariant International Ltd. | Emulsogen® TS 100 is a nonionic wetting and dispersing agent for organic pigments in dispersions, preparations and coatings. It is composed of Tristyrylphenol-Polyglycolether with approximately 10 moles ethylene oxide. This product is free of any addition...Vea Mas Emulsogen® TS 100 is a nonionic wetting and dispersing agent for organic pigments in dispersions, preparations and coatings. It is composed of Tristyrylphenol-Polyglycolether with approximately 10 moles ethylene oxide. This product is free of any additional biocide. Emulsogen® TS 100 has a HLB value of about 10 and is used for aqueous pigment dispersions, preparations, paints and coatings. Emulsogen® TS 100 is suitable for organic pigments and carbon black to produce stable, free flowing pigment preparations with high solid contents and with low viscosities. It improves the compatibility of pigments and minerals with polymers and binders. This product also improves the shelf life and stability of emulsion paints. Vea Menos | |
| Emulsogen® TS 200 | Clariant International Ltd. | Emulsogen® TS 200 is a dispersing agent suitable for a broad range of organic pigments, including carbon blacks in waterborne pigment preparations. | |
| Genamin® Gluco 50 | Clariant International Ltd. | Genamin® Gluco 50 is a renewable-based, VOC/SVOC-free and label-free neutralizing agent for waterborne paints. It improves storage stability as well as compatibility with pigments and reduces flash-rust formation. | |
| Genapol® ED 3060 | Clariant International Ltd. | Genapol® ED 3060 is a low-foaming wetting and dispersing agent for aqueous paints and coatings. This yellowish liquid improves the compatibility of pigments and minerals with polymers and binders in aqueous coatings and improves the color strength of orga...Vea Mas Genapol® ED 3060 is a low-foaming wetting and dispersing agent for aqueous paints and coatings. This yellowish liquid improves the compatibility of pigments and minerals with polymers and binders in aqueous coatings and improves the color strength of organic pigments like phthalocyanine blue or red and yellow azo pigments. Vea Menos | |
| Genapol® PF 20 | Clariant International Ltd. | Genapol® PF 20 is a low foaming, nonionic surfactant and defoamer for use in detergents and cleaning agents. It is also used as a low foaming emulsifier in emulsion polymerization and as a dispersing agent for pigment pastes and preparations. This product...Vea Mas Genapol® PF 20 is a low foaming, nonionic surfactant and defoamer for use in detergents and cleaning agents. It is also used as a low foaming emulsifier in emulsion polymerization and as a dispersing agent for pigment pastes and preparations. This product is a slightly cloudy, colorless liquid that is composed of block copolymer of propylene oxide and ethylene oxide, containing 20% w/w ethylene oxide. Genapol® PF 20 has good wetting and dispersing action coupled with low foaming tendency. Within the Genapol® PF series, the products with a lower degree of ethoxylation have a better foam-suppressing effect than the products with a higher degree of ethoxylation. Typical applications include rinsing aids, detergents for dishwashers and bottle-rinsing machines and industrial cleaning formulations. Vea Menos | |
| Genapol® PF 40 | Clariant International Ltd. | Genapol® PF 40 is a low-foaming nonionic surfactant for the chemical industry. It can be used in combination with other nonionic, anionic and cationic surfactants. Genapol® PF 40 is resistant to water hardness salts and to acids and alkalis in the concent...Vea Mas Genapol® PF 40 is a low-foaming nonionic surfactant for the chemical industry. It can be used in combination with other nonionic, anionic and cationic surfactants. Genapol® PF 40 is resistant to water hardness salts and to acids and alkalis in the concentrations normally used. This cloudy, colourless solution has good wetting and dispersing action coupled with low foaming tendency. Genapol® PF 40 is used as a low-foaming surfactant with very good dispersing action in detergents and cleaning agents. Typical applications include rinsing aids, detergents for dishwashers and bottle -rinsing machines and industrial cleaning formulations. Genapol® PF 40 is also used as a low-foaming emulsifier in emulsion polymerization and as a dispersing agent for pigment pastes and preparations. Vea Menos | |
| Genapol® X 100 | Clariant International Ltd. | Genapol® X 100 is a nonionic surfactant for the chemical industry. This white waxy product is used e.g. in detergents, industrial & institutional cleaning formulations, in emulsion polymerization and as an emulsifier for polyolefin waxes or silicon oils. ...Vea Mas Genapol® X 100 is a nonionic surfactant for the chemical industry. This white waxy product is used e.g. in detergents, industrial & institutional cleaning formulations, in emulsion polymerization and as an emulsifier for polyolefin waxes or silicon oils. This product is also available as Genapol® X 100 Terra, providing the same performance as its conventional counterpart and benefiting from a REDCert2 and ISCC Plus certified supply chain ensuring the use of biobased or renewable raw materials resulting in a significantly reduced carbon footprint and an RCI 61.7%. Vea Menos | |
| Genapol® X 100 Terra | Clariant International Ltd. | Genapol® X 100 Terra is a nonionic surfactant for the chemical industry. This white waxy product is used e.g. in detergents, industrial & institutional cleaning formulations, in emulsion polymerization and as an emulsifier for polyolefin waxes or silicon ...Vea Mas Genapol® X 100 Terra is a nonionic surfactant for the chemical industry. This white waxy product is used e.g. in detergents, industrial & institutional cleaning formulations, in emulsion polymerization and as an emulsifier for polyolefin waxes or silicon oils. Genapol® X 100 Terra provides the same performance as its conventional (no Terra) counterpart. As a member of the Terra-family, the purpose of the mass-balanced supply chain model is to use biobased or renewable raw materials. The mass balance is certified according to the REDCert2 and ISCC Plus standards for the chemical industry. This means: use of raw materials specified by the EU directive 2015/1513/EC Annex IX, no plastic waste, no animal origin, no Palm Oil/Palm Kernel Oil. Additional value includes replacement of fossil raw materials, reduced product carbon footprint compared to same materials made from fossil based raw materials, and RCI 61.7%. Vea Menos | |
| Genapol® X 1003 | Clariant International Ltd. | Genapol® X 1003 is a nonionic emulsifier for the chemical industry. It is composed of isotridecyl polyethylene glycol ether with 100 mole ethylene oxide. Genapol® X 1003 can be used in emulsion polymerization to reduce coagulation and to improve electroly...Vea Mas Genapol® X 1003 is a nonionic emulsifier for the chemical industry. It is composed of isotridecyl polyethylene glycol ether with 100 mole ethylene oxide. Genapol® X 1003 can be used in emulsion polymerization to reduce coagulation and to improve electrolyte resistance and freeze/thaw stability. Genapol® X 1003 is added to the emulsion either before, during or after the polymerization process. This product can be used as an emulsifier for bitumen emulsions. Vea Menos | |
| Genapol® X 1005 | Clariant International Ltd. | Genapol® X 1005 is a nonionic emulsifier for the chemical industry. It can be used in emulsion polymerization to reduce coagulation and to improve electrolyte resistance and freeze/thaw stability. Genapol® X 1005 is added to the emulsion either before, du...Vea Mas Genapol® X 1005 is a nonionic emulsifier for the chemical industry. It can be used in emulsion polymerization to reduce coagulation and to improve electrolyte resistance and freeze/thaw stability. Genapol® X 1005 is added to the emulsion either before, during or after the polymerization process. This product can also be used as an emulsifier for bitumen emulsions. Vea Menos | |
| Genapol® X 150 | Clariant International Ltd. | Genapol® X 150 is a nonionic emulsifier for emulsion polymerization. It is composed of isotridecyl polyethylene glycol ether with 15 mole ethylene oxide. Genapol® X 150 is used in emulsion polymerization of vinyl acetate, acrylate and styrene / acrylate d...Vea Mas Genapol® X 150 is a nonionic emulsifier for emulsion polymerization. It is composed of isotridecyl polyethylene glycol ether with 15 mole ethylene oxide. Genapol® X 150 is used in emulsion polymerization of vinyl acetate, acrylate and styrene / acrylate dispersions to reduce coagulation and to improve electrolyte resistance and freeze/thaw stability. This product is used either during or after polymerization. Vea Menos | |
| Genapol® X 307 | Clariant International Ltd. | Genapol® X 307 is a nonionic emulsifier for emulsion polymerization. It is composed of isotridecyl polyethylene glycol ether with 30 mole ethylene oxide. The use of Genapol® X 307 in emulsion polymerization of vinyl acetate, acrylate and acrylate / styren...Vea Mas Genapol® X 307 is a nonionic emulsifier for emulsion polymerization. It is composed of isotridecyl polyethylene glycol ether with 30 mole ethylene oxide. The use of Genapol® X 307 in emulsion polymerization of vinyl acetate, acrylate and acrylate / styrene dispersions reduces coagulation and improves electrolyte resistance and freeze/thaw stability. This product is added to the emulsion either before, during or after the polymerization process. Vea Menos |
